Re: [RFC PATCH v2 1/4] dt-bindings: update the Allwinner GPADC device tree binding for H3

[Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org>]

在 2017年04月04日 22:47, Rob Herring 写道:
> On Sun, Apr 02, 2017 at 09:33:01PM +0800, Icenowy Zheng wrote:
>> Allwinner H3 features a thermal sensor like the one in A33, but has its
>> register re-arranged, the clock divider moved to CCU (originally the
>> clock divider is in ADC) and added a pair of bus clock and reset.
>>
>> Update the binding document to cover H3.
>>
>> Signed-off-by: Icenowy Zheng <icenowy-h8G6r0blFSE@public.gmane.org>
>> ---
>>  .../devicetree/bindings/mfd/sun4i-gpadc.txt        | 23 ++++++++++++++++++++--
>>  1 file changed, 21 insertions(+), 2 deletions(-)
>>
>> diff --git a/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt b/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
>> index badff3611a98..7753133ca0ff 100644
>> --- a/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
>> +++ b/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
>> @@ -4,12 +4,20 @@ The Allwinner SoCs all have an ADC that can also act as a thermal sensor
>>  and sometimes as a touchscreen controller.
>>
>>  Required properties:
>> -  - compatible: "allwinner,sun8i-a33-ths",
>> +  - compatible: must contain one of the following compatibles:
>> +		- "allwinner,sun8i-a33-ths"
>> +		- "allwinner,sun8i-h3-ths"
>>    - reg: mmio address range of the chip,
>>    - #thermal-sensor-cells: shall be 0,
>>    - #io-channel-cells: shall be 0,
>>
>> -Example:
>> +Required properties for the following compatibles:
>> +		- "allwinner,sun8i-h3-ths"
>> +  - clocks: the bus clock and the input clock of the ADC,
>> +  - clock-names: should be "bus" and "ths",
>> +  - resets: the bus reset of the ADC,
>> +
>> +Example for A33:
>>  	ths: ths@01c25000 {
>>  		compatible = "allwinner,sun8i-a33-ths";
>>  		reg = <0x01c25000 0x100>;
>> @@ -17,6 +25,17 @@ Example:
>>  		#io-channel-cells = <0>;
>>  	};
>>
>> +Example for H3:
>> +	ths: ths@01c25000 {
>
> adc@...

It's a thermal sensor, so I think call it THS is more appropriate
here. It's implemented as an ADC driver just because the internal
code reusing of Linux. From device tree binding view I choose to
call it ths.

>
> And drop the leading 0.

OK.

>
>> +		compatible = "allwinner,sun8i-h3-ths";
>> +		reg = <0x01c25000 0x100>;
>> +		clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
>> +		clock-names = "bus", "ths";
>> +		resets = <&ccu RST_BUS_THS>;
>> +		#thermal-sensor-cells = <0>;
>> +		#io-channel-cells = <0>;
>> +	};
>> +
>>  sun4i, sun5i and sun6i SoCs are also supported via the older binding:
>>
>>  sun4i resistive touchscreen controller
>> --
>> 2.12.2
>>
>>
>> _______________________________________________
>> linux-arm-kernel mailing list
>> linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>

-- 
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
For more options, visit https://groups.google.com/d/optout.