From: Daniel Lezcano <daniel.lezcano@linaro.org>
To: "Rafael J. Wysocki" <rjw@rjwysocki.net>,
Linux ACPI <linux-acpi@vger.kernel.org>
Cc: LKML <linux-kernel@vger.kernel.org>,
Linux PM <linux-pm@vger.kernel.org>,
Michal Wilczynski <michal.wilczynski@intel.com>,
Zhang Rui <rui.zhang@intel.com>,
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Subject: Re: [PATCH v5 05/11] ACPI: thermal: Carry out trip point updates under zone lock
Date: Wed, 16 Aug 2023 18:25:30 +0200 [thread overview]
Message-ID: <c53f99db-353a-26c3-3b0a-3a3befbed528@linaro.org> (raw)
In-Reply-To: <2236767.iZASKD2KPV@kreacher>
On 07/08/2023 20:08, Rafael J. Wysocki wrote:
> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
>
> There is a race condition between acpi_thermal_trips_update() and
> acpi_thermal_check_fn(), because the trip points may get updated while
> the latter is running which in theory may lead to inconsistent results.
> For example, if two trips are updated together, using the temperature
> value of one of them from before the update and the temperature value
> of the other one from after the update may not lead to the expected
> outcome.
>
> Moreover, if thermal_get_trend() runs when a trip points update is in
> progress, it may end up using stale trip point temperatures.
>
> To address this, make acpi_thermal_trips_update() call
> thermal_zone_device_adjust() to carry out the trip points update and
> provide a new acpi_thermal_adjust_thermal_zone() wrapper around
> __acpi_thermal_trips_update() as the callback function for the latter.
>
> While at it, change the acpi_thermal_trips_update() return data type
> to void as that function always returns 0 anyway.
>
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> ---
[ ... ]
> {
> - int i, ret = acpi_thermal_trips_update(tz, ACPI_TRIPS_INIT);
> bool valid;
> + int i;
>
> - if (ret)
> - return ret;
> + __acpi_thermal_trips_update(tz, ACPI_TRIPS_INIT);
>
> valid = tz->trips.critical.valid |
> tz->trips.hot.valid |
> @@ -710,6 +732,7 @@ static struct thermal_zone_device_ops ac
> .get_trend = thermal_get_trend,
> .hot = acpi_thermal_zone_device_hot,
> .critical = acpi_thermal_zone_device_critical,
> + .update = acpi_thermal_adjust_thermal_zone,
It is too bad we have to add a callback in the core code just for this
driver.
I'm wondering if it is not possible to get rid of it ?
Is it possible to use an internal lock for the ACPI driver to solve the
race issue above ?
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
next prev parent reply other threads:[~2023-08-16 16:26 UTC|newest]
Thread overview: 87+ messages / expand[flat|nested] mbox.gz Atom feed top
2023-07-18 18:01 [PATCH v1 0/7] ACPI: thermal: Use trip point table to register thermal zones Rafael J. Wysocki
2023-07-18 18:02 ` [PATCH v1 1/7] thermal: core: Add mechanism for connecting trips with driver data Rafael J. Wysocki
2023-07-18 18:04 ` [PATCH v1 2/7] thermal: core: Do not handle trip points with invalid temperature Rafael J. Wysocki
2023-07-18 18:05 ` [PATCH v1 3/7] ACPI: thermal: Clean up acpi_thermal_register_thermal_zone() Rafael J. Wysocki
2023-07-18 18:06 ` [PATCH v1 4/7] ACPI: thermal: Hold thermal_check_lock around trip updates Rafael J. Wysocki
2023-07-18 18:06 ` [PATCH v1 5/7] ACPI: thermal: Use trip point table to register thermal zones Rafael J. Wysocki
2023-07-19 18:46 ` Rafael J. Wysocki
2023-07-18 18:07 ` [PATCH v1 6/7] ACPI: thermal: Rework thermal_get_trend() Rafael J. Wysocki
2023-07-19 18:50 ` Rafael J. Wysocki
2023-07-18 18:19 ` [PATCH v1 7/7] ACPI: thermal: Drop unnecessary thermal zone callbacks Rafael J. Wysocki
2023-07-18 22:45 ` [PATCH v1 0/7] ACPI: thermal: Use trip point table to register thermal zones Daniel Lezcano
2023-07-19 13:33 ` Rafael J. Wysocki
2023-07-21 12:44 ` [PATCH v2 0/8] " Rafael J. Wysocki
2023-07-21 12:46 ` [PATCH v2 1/8] thermal: core: Add mechanism for connecting trips with driver data Rafael J. Wysocki
2023-07-21 12:47 ` [PATCH v2 2/8] thermal: core: Do not handle trip points with invalid temperature Rafael J. Wysocki
2023-07-21 12:50 ` [PATCH v2 3/8] thermal: core: Add routines for locking and unlocking thermal zones Rafael J. Wysocki
2023-07-21 14:12 ` [PATCH v2 4/8] ACPI: thermal: Clean up acpi_thermal_register_thermal_zone() Rafael J. Wysocki
2023-07-21 14:51 ` [PATCH v2 5/8] ACPI: thermal: Hold thermal zone lock around trip updates Rafael J. Wysocki
2023-07-21 15:00 ` [PATCH v2 6/8] ACPI: thermal: Use trip point table to register thermal zones Rafael J. Wysocki
2023-07-21 15:08 ` [PATCH v2 7/8] ACPI: thermal: Rework thermal_get_trend() Rafael J. Wysocki
2023-07-21 15:10 ` [PATCH v2 8/8] ACPI: thermal: Drop unnecessary thermal zone callbacks Rafael J. Wysocki
2023-07-23 10:19 ` [PATCH v2 0/8] ACPI: thermal: Use trip point table to register thermal zones Daniel Lezcano
2023-07-24 7:59 ` Rafael J. Wysocki
2023-07-25 12:02 ` [PATCH v3 " Rafael J. Wysocki
2023-07-25 12:04 ` [PATCH v3 1/8] thermal: core: Add mechanism for connecting trips with driver data Rafael J. Wysocki
2023-08-01 18:29 ` Daniel Lezcano
2023-08-01 19:02 ` Rafael J. Wysocki
2023-08-02 12:34 ` Daniel Lezcano
2023-08-02 13:03 ` Rafael J. Wysocki
2023-08-02 15:50 ` Daniel Lezcano
2023-08-02 16:48 ` Rafael J. Wysocki
2023-08-03 13:06 ` Daniel Lezcano
2023-08-03 14:15 ` Rafael J. Wysocki
2023-08-03 16:20 ` Daniel Lezcano
2023-08-03 19:58 ` Rafael J. Wysocki
2023-08-04 8:17 ` Daniel Lezcano
2023-08-04 11:14 ` Rafael J. Wysocki
2023-07-25 12:06 ` [PATCH v3 2/8] thermal: core: Do not handle trip points with invalid temperature Rafael J. Wysocki
2023-08-01 18:29 ` Daniel Lezcano
2023-08-01 19:05 ` Rafael J. Wysocki
2023-08-01 19:31 ` Daniel Lezcano
2023-07-25 12:08 ` [PATCH v3 3/8] thermal: core: Add routines for locking and unlocking thermal zones Rafael J. Wysocki
2023-08-01 18:30 ` Daniel Lezcano
2023-08-01 19:11 ` Rafael J. Wysocki
2023-07-25 12:09 ` [PATCH v3 4/8] ACPI: thermal: Clean up acpi_thermal_register_thermal_zone() Rafael J. Wysocki
2023-07-25 12:16 ` [PATCH v3 5/8] ACPI: thermal: Hold thermal zone lock around trip updates Rafael J. Wysocki
2023-08-01 18:39 ` Daniel Lezcano
2023-08-01 18:51 ` Rafael J. Wysocki
2023-07-25 12:20 ` [PATCH v3 6/8] ACPI: thermal: Use trip point table to register thermal zones Rafael J. Wysocki
2023-07-25 18:08 ` Rafael J. Wysocki
2023-07-25 18:12 ` [PATCH v3.1 " Rafael J. Wysocki
2023-07-25 12:22 ` [PATCH v3 7/8] ACPI: thermal: Rework thermal_get_trend() Rafael J. Wysocki
2023-07-25 12:24 ` [PATCH v3 8/8] ACPI: thermal: Drop unnecessary thermal zone callbacks Rafael J. Wysocki
2023-08-01 18:26 ` [PATCH v3 0/8] ACPI: thermal: Use trip point table to register thermal zones Daniel Lezcano
2023-08-01 18:39 ` Rafael J. Wysocki
2023-08-04 20:58 ` [PATCH v4 00/10] " Rafael J. Wysocki
2023-08-04 21:00 ` [PATCH v4 01/10] thermal: core: Do not handle trip points with invalid temperature Rafael J. Wysocki
2023-08-07 11:25 ` Daniel Lezcano
2023-08-04 21:03 ` [PATCH v4 02/10] thermal: core: Introduce thermal_zone_device_adjust() Rafael J. Wysocki
2023-08-04 21:04 ` [PATCH v4 03/10] thermal: core: Add priv pointer to struct thermal_trip Rafael J. Wysocki
2023-08-07 11:25 ` Daniel Lezcano
2023-08-04 21:05 ` [PATCH v4 04/10] thermal: core: Add thermal_zone_update_trip_temp() helper routine Rafael J. Wysocki
2023-08-07 11:29 ` Daniel Lezcano
2023-08-07 15:40 ` Rafael J. Wysocki
2023-08-07 16:17 ` Daniel Lezcano
2023-08-07 16:23 ` Rafael J. Wysocki
2023-08-04 21:07 ` [PATCH v4 05/10] ACPI: thermal: Clean up acpi_thermal_register_thermal_zone() Rafael J. Wysocki
2023-08-04 21:13 ` [PATCH v4 06/10] ACPI: thermal: Carry out trip point updates under zone lock Rafael J. Wysocki
2023-08-04 21:18 ` [PATCH v4 07/10] ACPI: thermal: Use trip point table to register thermal zones Rafael J. Wysocki
2023-08-04 21:22 ` [PATCH v4 08/10] ACPI: thermal: Rework thermal_get_trend() Rafael J. Wysocki
2023-08-04 21:24 ` [PATCH v4 09/10] ACPI: thermal: Drop unnecessary thermal zone callbacks Rafael J. Wysocki
2023-08-04 21:25 ` [PATCH v4 10/10] thermal: core: Eliminate code duplication from acpi_thermal_notify() Rafael J. Wysocki
2023-08-07 17:59 ` [PATCH v5 00/11] ACPI: thermal: Use trip point table to register thermal zones Rafael J. Wysocki
2023-08-07 18:01 ` [PATCH v5 01/11] thermal: core: Do not handle trip points with invalid temperature Rafael J. Wysocki
2023-08-07 18:02 ` [PATCH v5 02/11] thermal: core: Introduce thermal_zone_device_adjust() Rafael J. Wysocki
2023-08-07 18:04 ` [PATCH v5 03/11] thermal: core: Add priv pointer to struct thermal_trip Rafael J. Wysocki
2023-08-07 18:06 ` [PATCH v5 04/11] ACPI: thermal: Clean up acpi_thermal_register_thermal_zone() Rafael J. Wysocki
2023-08-07 18:08 ` [PATCH v5 05/11] ACPI: thermal: Carry out trip point updates under zone lock Rafael J. Wysocki
2023-08-16 16:25 ` Daniel Lezcano [this message]
2023-08-17 13:09 ` Rafael J. Wysocki
2023-08-07 18:10 ` [PATCH v5 06/11] ACPI: thermal: Introduce struct acpi_thermal_trip Rafael J. Wysocki
2023-08-07 18:11 ` [PATCH v5 07/11] thermal: core: Rework and rename __for_each_thermal_trip() Rafael J. Wysocki
2023-08-07 18:14 ` [PATCH v5 08/11] ACPI: thermal: Use trip point table to register thermal zones Rafael J. Wysocki
2023-08-09 11:07 ` [PATCH v5.1 " Rafael J. Wysocki
2023-08-07 18:17 ` [PATCH v5 09/11] ACPI: thermal: Rework thermal_get_trend() Rafael J. Wysocki
2023-08-07 18:18 ` [PATCH v5 10/11] ACPI: thermal: Drop unnecessary thermal zone callbacks Rafael J. Wysocki
2023-08-07 18:20 ` [PATCH v5 11/11] thermal: core: Eliminate code duplication from acpi_thermal_notify() Rafael J. Wysocki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=c53f99db-353a-26c3-3b0a-3a3befbed528@linaro.org \
--to=daniel.lezcano@linaro.org \
--cc=linux-acpi@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=michal.wilczynski@intel.com \
--cc=rjw@rjwysocki.net \
--cc=rui.zhang@intel.com \
--cc=srinivas.pandruvada@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).