Re: [PATCH 2/2] arm64: dts: qcom: qcs8300: Add cpufreq scaling node

[Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>]

On 3/13/25 7:03 AM, Imran Shaik wrote:
> Add cpufreq-hw node to support cpufreq scaling on QCS8300.
> 
> Signed-off-by: Imran Shaik <quic_imrashai@quicinc.com>
> ---

[...]

> +		cpufreq_hw: cpufreq@18591000 {
> +			compatible = "qcom,qcs8300-cpufreq-epss", "qcom,cpufreq-epss";
> +			reg = <0x0 0x18591000 0x0 0x1000>,
> +			      <0x0 0x18594000 0x0 0x1000>,
> +			      <0x0 0x18593000 0x0 0x1000>;
> +			reg-names = "freq-domain0", "freq-domain1", "freq-domain2";

Please turn these into vertical lists> +
> +			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
> +				     <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
> +			interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2";

Since these labels don't match the hardware anyway, please sort them by address

Konrad

> +
> +			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
> +			clock-names = "xo", "alternate";
> +
> +			#freq-domain-cells = <1>;
> +		};
> +
>  		remoteproc_gpdsp: remoteproc@20c00000 {
>  			compatible = "qcom,qcs8300-gpdsp-pas", "qcom,sa8775p-gpdsp0-pas";
>  			reg = <0x0 0x20c00000 0x0 0x10000>;
>