* [PATCH v3 0/2] driver: thermal: Move some drivers into subdirs
@ 2018-11-27 18:58 Amit Kucheria
2018-11-27 18:58 ` [PATCH v3 1/2] drivers: thermal: Move various drivers for intel platforms into a subdir Amit Kucheria
2018-11-27 18:58 ` [PATCH v3 2/2] drivers: thermal: Move QCOM_SPMI_TEMP_ALARM into the qcom subdir Amit Kucheria
0 siblings, 2 replies; 4+ messages in thread
From: Amit Kucheria @ 2018-11-27 18:58 UTC (permalink / raw)
To: linux-kernel; +Cc: rui.zhang, edubezval, linux-pm, Daniel Lezcano
Move the various drivers for Intel platforms into their own subdir. Also
consolidate Qualcomm drivers into the qcom subdir.
This cleans up the directory making it easier to find things.
There is no great time to send patches that move files around. So here's an
attempt to sneak it into 4.21 before everything else.
This was generated and compile-tested against 4.20-rc4. If you would like
me to try again a bit later, I'm happy to do so.
Changes since v2:
- Rebased on top of 4.20-rc4
Changes since v1:
- Removed a stray character that snuck into the Makefile
- Added Acks
- Rebased to v4.19-rc6
Amit Kucheria (2):
drivers: thermal: Move various drivers for intel platforms into a
subdir
drivers: thermal: Move QCOM_SPMI_TEMP_ALARM into the qcom subdir
drivers/thermal/Kconfig | 94 +------------------
drivers/thermal/Makefile | 12 +--
drivers/thermal/intel/Kconfig | 77 +++++++++++++++
drivers/thermal/intel/Makefile | 12 +++
.../{ => intel}/int340x_thermal/Kconfig | 0
.../{ => intel}/int340x_thermal/Makefile | 0
.../int340x_thermal/acpi_thermal_rel.c | 0
.../int340x_thermal/acpi_thermal_rel.h | 0
.../int340x_thermal/int3400_thermal.c | 0
.../int340x_thermal/int3402_thermal.c | 0
.../int340x_thermal/int3403_thermal.c | 0
.../int340x_thermal/int3406_thermal.c | 0
.../int340x_thermal/int340x_thermal_zone.c | 0
.../int340x_thermal/int340x_thermal_zone.h | 0
.../processor_thermal_device.c | 0
.../{ => intel}/intel_bxt_pmic_thermal.c | 0
.../thermal/{ => intel}/intel_pch_thermal.c | 0
.../thermal/{ => intel}/intel_powerclamp.c | 0
.../{ => intel}/intel_quark_dts_thermal.c | 0
.../thermal/{ => intel}/intel_soc_dts_iosf.c | 0
.../thermal/{ => intel}/intel_soc_dts_iosf.h | 0
.../{ => intel}/intel_soc_dts_thermal.c | 0
.../{ => intel}/x86_pkg_temp_thermal.c | 0
drivers/thermal/qcom/Kconfig | 11 +++
drivers/thermal/qcom/Makefile | 1 +
.../thermal/{ => qcom}/qcom-spmi-temp-alarm.c | 0
26 files changed, 108 insertions(+), 99 deletions(-)
create mode 100644 drivers/thermal/intel/Kconfig
create mode 100644 drivers/thermal/intel/Makefile
rename drivers/thermal/{ => intel}/int340x_thermal/Kconfig (100%)
rename drivers/thermal/{ => intel}/int340x_thermal/Makefile (100%)
rename drivers/thermal/{ => intel}/int340x_thermal/acpi_thermal_rel.c (100%)
rename drivers/thermal/{ => intel}/int340x_thermal/acpi_thermal_rel.h (100%)
rename drivers/thermal/{ => intel}/int340x_thermal/int3400_thermal.c (100%)
rename drivers/thermal/{ => intel}/int340x_thermal/int3402_thermal.c (100%)
rename drivers/thermal/{ => intel}/int340x_thermal/int3403_thermal.c (100%)
rename drivers/thermal/{ => intel}/int340x_thermal/int3406_thermal.c (100%)
rename drivers/thermal/{ => intel}/int340x_thermal/int340x_thermal_zone.c (100%)
rename drivers/thermal/{ => intel}/int340x_thermal/int340x_thermal_zone.h (100%)
rename drivers/thermal/{ => intel}/int340x_thermal/processor_thermal_device.c (100%)
rename drivers/thermal/{ => intel}/intel_bxt_pmic_thermal.c (100%)
rename drivers/thermal/{ => intel}/intel_pch_thermal.c (100%)
rename drivers/thermal/{ => intel}/intel_powerclamp.c (100%)
rename drivers/thermal/{ => intel}/intel_quark_dts_thermal.c (100%)
rename drivers/thermal/{ => intel}/intel_soc_dts_iosf.c (100%)
rename drivers/thermal/{ => intel}/intel_soc_dts_iosf.h (100%)
rename drivers/thermal/{ => intel}/intel_soc_dts_thermal.c (100%)
rename drivers/thermal/{ => intel}/x86_pkg_temp_thermal.c (100%)
rename drivers/thermal/{ => qcom}/qcom-spmi-temp-alarm.c (100%)
--
2.17.1
^ permalink raw reply [flat|nested] 4+ messages in thread* [PATCH v3 1/2] drivers: thermal: Move various drivers for intel platforms into a subdir 2018-11-27 18:58 [PATCH v3 0/2] driver: thermal: Move some drivers into subdirs Amit Kucheria @ 2018-11-27 18:58 ` Amit Kucheria 2018-12-05 15:16 ` Zhang Rui 2018-11-27 18:58 ` [PATCH v3 2/2] drivers: thermal: Move QCOM_SPMI_TEMP_ALARM into the qcom subdir Amit Kucheria 1 sibling, 1 reply; 4+ messages in thread From: Amit Kucheria @ 2018-11-27 18:58 UTC (permalink / raw) To: linux-kernel; +Cc: rui.zhang, edubezval, linux-pm, Daniel Lezcano This cleans up the directory a bit, now that we have several other platforms using platform-specific sub-directories. Compile-tested with ARCH=x86 defconfig and the drivers explicitly enabled with menuconfig. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> --- drivers/thermal/Kconfig | 83 ++----------------- drivers/thermal/Makefile | 11 +-- drivers/thermal/intel/Kconfig | 77 +++++++++++++++++ drivers/thermal/intel/Makefile | 12 +++ .../{ => intel}/int340x_thermal/Kconfig | 0 .../{ => intel}/int340x_thermal/Makefile | 0 .../int340x_thermal/acpi_thermal_rel.c | 0 .../int340x_thermal/acpi_thermal_rel.h | 0 .../int340x_thermal/int3400_thermal.c | 0 .../int340x_thermal/int3402_thermal.c | 0 .../int340x_thermal/int3403_thermal.c | 0 .../int340x_thermal/int3406_thermal.c | 0 .../int340x_thermal/int340x_thermal_zone.c | 0 .../int340x_thermal/int340x_thermal_zone.h | 0 .../processor_thermal_device.c | 0 .../{ => intel}/intel_bxt_pmic_thermal.c | 0 .../thermal/{ => intel}/intel_pch_thermal.c | 0 .../thermal/{ => intel}/intel_powerclamp.c | 0 .../{ => intel}/intel_quark_dts_thermal.c | 0 .../thermal/{ => intel}/intel_soc_dts_iosf.c | 0 .../thermal/{ => intel}/intel_soc_dts_iosf.h | 0 .../{ => intel}/intel_soc_dts_thermal.c | 0 .../{ => intel}/x86_pkg_temp_thermal.c | 0 23 files changed, 96 insertions(+), 87 deletions(-) create mode 100644 drivers/thermal/intel/Kconfig create mode 100644 drivers/thermal/intel/Makefile rename drivers/thermal/{ => intel}/int340x_thermal/Kconfig (100%) rename drivers/thermal/{ => intel}/int340x_thermal/Makefile (100%) rename drivers/thermal/{ => intel}/int340x_thermal/acpi_thermal_rel.c (100%) rename drivers/thermal/{ => intel}/int340x_thermal/acpi_thermal_rel.h (100%) rename drivers/thermal/{ => intel}/int340x_thermal/int3400_thermal.c (100%) rename drivers/thermal/{ => intel}/int340x_thermal/int3402_thermal.c (100%) rename drivers/thermal/{ => intel}/int340x_thermal/int3403_thermal.c (100%) rename drivers/thermal/{ => intel}/int340x_thermal/int3406_thermal.c (100%) rename drivers/thermal/{ => intel}/int340x_thermal/int340x_thermal_zone.c (100%) rename drivers/thermal/{ => intel}/int340x_thermal/int340x_thermal_zone.h (100%) rename drivers/thermal/{ => intel}/int340x_thermal/processor_thermal_device.c (100%) rename drivers/thermal/{ => intel}/intel_bxt_pmic_thermal.c (100%) rename drivers/thermal/{ => intel}/intel_pch_thermal.c (100%) rename drivers/thermal/{ => intel}/intel_powerclamp.c (100%) rename drivers/thermal/{ => intel}/intel_quark_dts_thermal.c (100%) rename drivers/thermal/{ => intel}/intel_soc_dts_iosf.c (100%) rename drivers/thermal/{ => intel}/intel_soc_dts_iosf.h (100%) rename drivers/thermal/{ => intel}/intel_soc_dts_thermal.c (100%) rename drivers/thermal/{ => intel}/x86_pkg_temp_thermal.c (100%) diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index 5422523c03f8..772ab9dadda7 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -326,84 +326,6 @@ config DA9062_THERMAL zone. Compatible with the DA9062 and DA9061 PMICs. -config INTEL_POWERCLAMP - tristate "Intel PowerClamp idle injection driver" - depends on THERMAL - depends on X86 - depends on CPU_SUP_INTEL - help - Enable this to enable Intel PowerClamp idle injection driver. This - enforce idle time which results in more package C-state residency. The - user interface is exposed via generic thermal framework. - -config X86_PKG_TEMP_THERMAL - tristate "X86 package temperature thermal driver" - depends on X86_THERMAL_VECTOR - select THERMAL_GOV_USER_SPACE - select THERMAL_WRITABLE_TRIPS - default m - help - Enable this to register CPU digital sensor for package temperature as - thermal zone. Each package will have its own thermal zone. There are - two trip points which can be set by user to get notifications via thermal - notification methods. - -config INTEL_SOC_DTS_IOSF_CORE - tristate - depends on X86 && PCI - select IOSF_MBI - help - This is becoming a common feature for Intel SoCs to expose the additional - digital temperature sensors (DTSs) using side band interface (IOSF). This - implements the common set of helper functions to register, get temperature - and get/set thresholds on DTSs. - -config INTEL_SOC_DTS_THERMAL - tristate "Intel SoCs DTS thermal driver" - depends on X86 && PCI && ACPI - select INTEL_SOC_DTS_IOSF_CORE - select THERMAL_WRITABLE_TRIPS - help - Enable this to register Intel SoCs (e.g. Bay Trail) platform digital - temperature sensor (DTS). These SoCs have two additional DTSs in - addition to DTSs on CPU cores. Each DTS will be registered as a - thermal zone. There are two trip points. One of the trip point can - be set by user mode programs to get notifications via Linux thermal - notification methods.The other trip is a critical trip point, which - was set by the driver based on the TJ MAX temperature. - -config INTEL_QUARK_DTS_THERMAL - tristate "Intel Quark DTS thermal driver" - depends on X86_INTEL_QUARK - help - Enable this to register Intel Quark SoC (e.g. X1000) platform digital - temperature sensor (DTS). For X1000 SoC, it has one on-die DTS. - The DTS will be registered as a thermal zone. There are two trip points: - hot & critical. The critical trip point default value is set by - underlying BIOS/Firmware. - -menu "ACPI INT340X thermal drivers" -source drivers/thermal/int340x_thermal/Kconfig -endmenu - -config INTEL_BXT_PMIC_THERMAL - tristate "Intel Broxton PMIC thermal driver" - depends on X86 && INTEL_SOC_PMIC_BXTWC && REGMAP - help - Select this driver for Intel Broxton PMIC with ADC channels monitoring - system temperature measurements and alerts. - This driver is used for monitoring the ADC channels of PMIC and handles - the alert trip point interrupts and notifies the thermal framework with - the trip point and temperature details of the zone. - -config INTEL_PCH_THERMAL - tristate "Intel PCH Thermal Reporting Driver" - depends on X86 && PCI - help - Enable this to support thermal reporting on certain intel PCHs. - Thermal reporting device will provide temperature reading, - programmable trip points and other information. - config MTK_THERMAL tristate "Temperature sensor driver for mediatek SoCs" depends on ARCH_MEDIATEK || COMPILE_TEST @@ -415,6 +337,11 @@ config MTK_THERMAL Enable this option if you want to have support for thermal management controller present in Mediatek SoCs +menu "Intel thermal drivers" +depends on X86 || X86_INTEL_QUARK || COMPILE_TEST +source "drivers/thermal/intel/Kconfig" +endmenu + menu "Broadcom thermal drivers" depends on ARCH_BCM || ARCH_BRCMSTB || ARCH_BCM2835 || COMPILE_TEST source "drivers/thermal/broadcom/Kconfig" diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index 82bb50dc6423..031f61e7dfe8 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -44,16 +44,9 @@ obj-$(CONFIG_IMX_THERMAL) += imx_thermal.o obj-$(CONFIG_MAX77620_THERMAL) += max77620_thermal.o obj-$(CONFIG_QORIQ_THERMAL) += qoriq_thermal.o obj-$(CONFIG_DA9062_THERMAL) += da9062-thermal.o -obj-$(CONFIG_INTEL_POWERCLAMP) += intel_powerclamp.o -obj-$(CONFIG_X86_PKG_TEMP_THERMAL) += x86_pkg_temp_thermal.o -obj-$(CONFIG_INTEL_SOC_DTS_IOSF_CORE) += intel_soc_dts_iosf.o -obj-$(CONFIG_INTEL_SOC_DTS_THERMAL) += intel_soc_dts_thermal.o -obj-$(CONFIG_INTEL_QUARK_DTS_THERMAL) += intel_quark_dts_thermal.o +obj-y += intel/ obj-$(CONFIG_TI_SOC_THERMAL) += ti-soc-thermal/ -obj-$(CONFIG_INT340X_THERMAL) += int340x_thermal/ -obj-$(CONFIG_INTEL_BXT_PMIC_THERMAL) += intel_bxt_pmic_thermal.o -obj-$(CONFIG_INTEL_PCH_THERMAL) += intel_pch_thermal.o -obj-y += st/ +obj-$(CONFIG_ST_THERMAL) += st/ obj-$(CONFIG_QCOM_TSENS) += qcom/ obj-y += tegra/ obj-$(CONFIG_HISI_THERMAL) += hisi_thermal.o diff --git a/drivers/thermal/intel/Kconfig b/drivers/thermal/intel/Kconfig new file mode 100644 index 000000000000..9c06d4ad7c97 --- /dev/null +++ b/drivers/thermal/intel/Kconfig @@ -0,0 +1,77 @@ +config INTEL_POWERCLAMP + tristate "Intel PowerClamp idle injection driver" + depends on THERMAL + depends on X86 + depends on CPU_SUP_INTEL + help + Enable this to enable Intel PowerClamp idle injection driver. This + enforce idle time which results in more package C-state residency. The + user interface is exposed via generic thermal framework. + +config X86_PKG_TEMP_THERMAL + tristate "X86 package temperature thermal driver" + depends on X86_THERMAL_VECTOR + select THERMAL_GOV_USER_SPACE + select THERMAL_WRITABLE_TRIPS + default m + help + Enable this to register CPU digital sensor for package temperature as + thermal zone. Each package will have its own thermal zone. There are + two trip points which can be set by user to get notifications via thermal + notification methods. + +config INTEL_SOC_DTS_IOSF_CORE + tristate + depends on X86 && PCI + select IOSF_MBI + help + This is becoming a common feature for Intel SoCs to expose the additional + digital temperature sensors (DTSs) using side band interface (IOSF). This + implements the common set of helper functions to register, get temperature + and get/set thresholds on DTSs. + +config INTEL_SOC_DTS_THERMAL + tristate "Intel SoCs DTS thermal driver" + depends on X86 && PCI && ACPI + select INTEL_SOC_DTS_IOSF_CORE + select THERMAL_WRITABLE_TRIPS + help + Enable this to register Intel SoCs (e.g. Bay Trail) platform digital + temperature sensor (DTS). These SoCs have two additional DTSs in + addition to DTSs on CPU cores. Each DTS will be registered as a + thermal zone. There are two trip points. One of the trip point can + be set by user mode programs to get notifications via Linux thermal + notification methods.The other trip is a critical trip point, which + was set by the driver based on the TJ MAX temperature. + +config INTEL_QUARK_DTS_THERMAL + tristate "Intel Quark DTS thermal driver" + depends on X86_INTEL_QUARK + help + Enable this to register Intel Quark SoC (e.g. X1000) platform digital + temperature sensor (DTS). For X1000 SoC, it has one on-die DTS. + The DTS will be registered as a thermal zone. There are two trip points: + hot & critical. The critical trip point default value is set by + underlying BIOS/Firmware. + +menu "ACPI INT340X thermal drivers" +source drivers/thermal/intel/int340x_thermal/Kconfig +endmenu + +config INTEL_BXT_PMIC_THERMAL + tristate "Intel Broxton PMIC thermal driver" + depends on X86 && INTEL_SOC_PMIC_BXTWC && REGMAP + help + Select this driver for Intel Broxton PMIC with ADC channels monitoring + system temperature measurements and alerts. + This driver is used for monitoring the ADC channels of PMIC and handles + the alert trip point interrupts and notifies the thermal framework with + the trip point and temperature details of the zone. + +config INTEL_PCH_THERMAL + tristate "Intel PCH Thermal Reporting Driver" + depends on X86 && PCI + help + Enable this to support thermal reporting on certain intel PCHs. + Thermal reporting device will provide temperature reading, + programmable trip points and other information. diff --git a/drivers/thermal/intel/Makefile b/drivers/thermal/intel/Makefile new file mode 100644 index 000000000000..0d9736ced5d4 --- /dev/null +++ b/drivers/thermal/intel/Makefile @@ -0,0 +1,12 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for various Intel thermal drivers. + +obj-$(CONFIG_INTEL_POWERCLAMP) += intel_powerclamp.o +obj-$(CONFIG_X86_PKG_TEMP_THERMAL) += x86_pkg_temp_thermal.o +obj-$(CONFIG_INTEL_SOC_DTS_IOSF_CORE) += intel_soc_dts_iosf.o +obj-$(CONFIG_INTEL_SOC_DTS_THERMAL) += intel_soc_dts_thermal.o +obj-$(CONFIG_INTEL_QUARK_DTS_THERMAL) += intel_quark_dts_thermal.o +obj-$(CONFIG_INT340X_THERMAL) += int340x_thermal/ +obj-$(CONFIG_INTEL_BXT_PMIC_THERMAL) += intel_bxt_pmic_thermal.o +obj-$(CONFIG_INTEL_PCH_THERMAL) += intel_pch_thermal.o diff --git a/drivers/thermal/int340x_thermal/Kconfig b/drivers/thermal/intel/int340x_thermal/Kconfig similarity index 100% rename from drivers/thermal/int340x_thermal/Kconfig rename to drivers/thermal/intel/int340x_thermal/Kconfig diff --git a/drivers/thermal/int340x_thermal/Makefile b/drivers/thermal/intel/int340x_thermal/Makefile similarity index 100% rename from drivers/thermal/int340x_thermal/Makefile rename to drivers/thermal/intel/int340x_thermal/Makefile diff --git a/drivers/thermal/int340x_thermal/acpi_thermal_rel.c b/drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.c similarity index 100% rename from drivers/thermal/int340x_thermal/acpi_thermal_rel.c rename to drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.c diff --git a/drivers/thermal/int340x_thermal/acpi_thermal_rel.h b/drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.h similarity index 100% rename from drivers/thermal/int340x_thermal/acpi_thermal_rel.h rename to drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.h diff --git a/drivers/thermal/int340x_thermal/int3400_thermal.c b/drivers/thermal/intel/int340x_thermal/int3400_thermal.c similarity index 100% rename from drivers/thermal/int340x_thermal/int3400_thermal.c rename to drivers/thermal/intel/int340x_thermal/int3400_thermal.c diff --git a/drivers/thermal/int340x_thermal/int3402_thermal.c b/drivers/thermal/intel/int340x_thermal/int3402_thermal.c similarity index 100% rename from drivers/thermal/int340x_thermal/int3402_thermal.c rename to drivers/thermal/intel/int340x_thermal/int3402_thermal.c diff --git a/drivers/thermal/int340x_thermal/int3403_thermal.c b/drivers/thermal/intel/int340x_thermal/int3403_thermal.c similarity index 100% rename from drivers/thermal/int340x_thermal/int3403_thermal.c rename to drivers/thermal/intel/int340x_thermal/int3403_thermal.c diff --git a/drivers/thermal/int340x_thermal/int3406_thermal.c b/drivers/thermal/intel/int340x_thermal/int3406_thermal.c similarity index 100% rename from drivers/thermal/int340x_thermal/int3406_thermal.c rename to drivers/thermal/intel/int340x_thermal/int3406_thermal.c diff --git a/drivers/thermal/int340x_thermal/int340x_thermal_zone.c b/drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.c similarity index 100% rename from drivers/thermal/int340x_thermal/int340x_thermal_zone.c rename to drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.c diff --git a/drivers/thermal/int340x_thermal/int340x_thermal_zone.h b/drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.h similarity index 100% rename from drivers/thermal/int340x_thermal/int340x_thermal_zone.h rename to drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.h diff --git a/drivers/thermal/int340x_thermal/processor_thermal_device.c b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c similarity index 100% rename from drivers/thermal/int340x_thermal/processor_thermal_device.c rename to drivers/thermal/intel/int340x_thermal/processor_thermal_device.c diff --git a/drivers/thermal/intel_bxt_pmic_thermal.c b/drivers/thermal/intel/intel_bxt_pmic_thermal.c similarity index 100% rename from drivers/thermal/intel_bxt_pmic_thermal.c rename to drivers/thermal/intel/intel_bxt_pmic_thermal.c diff --git a/drivers/thermal/intel_pch_thermal.c b/drivers/thermal/intel/intel_pch_thermal.c similarity index 100% rename from drivers/thermal/intel_pch_thermal.c rename to drivers/thermal/intel/intel_pch_thermal.c diff --git a/drivers/thermal/intel_powerclamp.c b/drivers/thermal/intel/intel_powerclamp.c similarity index 100% rename from drivers/thermal/intel_powerclamp.c rename to drivers/thermal/intel/intel_powerclamp.c diff --git a/drivers/thermal/intel_quark_dts_thermal.c b/drivers/thermal/intel/intel_quark_dts_thermal.c similarity index 100% rename from drivers/thermal/intel_quark_dts_thermal.c rename to drivers/thermal/intel/intel_quark_dts_thermal.c diff --git a/drivers/thermal/intel_soc_dts_iosf.c b/drivers/thermal/intel/intel_soc_dts_iosf.c similarity index 100% rename from drivers/thermal/intel_soc_dts_iosf.c rename to drivers/thermal/intel/intel_soc_dts_iosf.c diff --git a/drivers/thermal/intel_soc_dts_iosf.h b/drivers/thermal/intel/intel_soc_dts_iosf.h similarity index 100% rename from drivers/thermal/intel_soc_dts_iosf.h rename to drivers/thermal/intel/intel_soc_dts_iosf.h diff --git a/drivers/thermal/intel_soc_dts_thermal.c b/drivers/thermal/intel/intel_soc_dts_thermal.c similarity index 100% rename from drivers/thermal/intel_soc_dts_thermal.c rename to drivers/thermal/intel/intel_soc_dts_thermal.c diff --git a/drivers/thermal/x86_pkg_temp_thermal.c b/drivers/thermal/intel/x86_pkg_temp_thermal.c similarity index 100% rename from drivers/thermal/x86_pkg_temp_thermal.c rename to drivers/thermal/intel/x86_pkg_temp_thermal.c -- 2.17.1 ^ permalink raw reply related [flat|nested] 4+ messages in thread
* Re: [PATCH v3 1/2] drivers: thermal: Move various drivers for intel platforms into a subdir 2018-11-27 18:58 ` [PATCH v3 1/2] drivers: thermal: Move various drivers for intel platforms into a subdir Amit Kucheria @ 2018-12-05 15:16 ` Zhang Rui 0 siblings, 0 replies; 4+ messages in thread From: Zhang Rui @ 2018-12-05 15:16 UTC (permalink / raw) To: Amit Kucheria, linux-kernel; +Cc: edubezval, linux-pm, Daniel Lezcano On 三, 2018-11-28 at 00:28 +0530, Amit Kucheria wrote: > This cleans up the directory a bit, now that we have several other > platforms using platform-specific sub-directories. Compile-tested > with > ARCH=x86 defconfig and the drivers explicitly enabled with > menuconfig. > > Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> > Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> > --- > drivers/thermal/Kconfig | 83 ++--------------- > -- > drivers/thermal/Makefile | 11 +-- > drivers/thermal/intel/Kconfig | 77 +++++++++++++++++ > drivers/thermal/intel/Makefile | 12 +++ > .../{ => intel}/int340x_thermal/Kconfig | 0 > .../{ => intel}/int340x_thermal/Makefile | 0 > .../int340x_thermal/acpi_thermal_rel.c | 0 > .../int340x_thermal/acpi_thermal_rel.h | 0 > .../int340x_thermal/int3400_thermal.c | 0 > .../int340x_thermal/int3402_thermal.c | 0 > .../int340x_thermal/int3403_thermal.c | 0 > .../int340x_thermal/int3406_thermal.c | 0 > .../int340x_thermal/int340x_thermal_zone.c | 0 > .../int340x_thermal/int340x_thermal_zone.h | 0 > .../processor_thermal_device.c | 0 > .../{ => intel}/intel_bxt_pmic_thermal.c | 0 > .../thermal/{ => intel}/intel_pch_thermal.c | 0 > .../thermal/{ => intel}/intel_powerclamp.c | 0 > .../{ => intel}/intel_quark_dts_thermal.c | 0 > .../thermal/{ => intel}/intel_soc_dts_iosf.c | 0 > .../thermal/{ => intel}/intel_soc_dts_iosf.h | 0 > .../{ => intel}/intel_soc_dts_thermal.c | 0 > .../{ => intel}/x86_pkg_temp_thermal.c | 0 > 23 files changed, 96 insertions(+), 87 deletions(-) > create mode 100644 drivers/thermal/intel/Kconfig > create mode 100644 drivers/thermal/intel/Makefile > rename drivers/thermal/{ => intel}/int340x_thermal/Kconfig (100%) > rename drivers/thermal/{ => intel}/int340x_thermal/Makefile (100%) > rename drivers/thermal/{ => > intel}/int340x_thermal/acpi_thermal_rel.c (100%) > rename drivers/thermal/{ => > intel}/int340x_thermal/acpi_thermal_rel.h (100%) > rename drivers/thermal/{ => intel}/int340x_thermal/int3400_thermal.c > (100%) > rename drivers/thermal/{ => intel}/int340x_thermal/int3402_thermal.c > (100%) > rename drivers/thermal/{ => intel}/int340x_thermal/int3403_thermal.c > (100%) > rename drivers/thermal/{ => intel}/int340x_thermal/int3406_thermal.c > (100%) > rename drivers/thermal/{ => > intel}/int340x_thermal/int340x_thermal_zone.c (100%) > rename drivers/thermal/{ => > intel}/int340x_thermal/int340x_thermal_zone.h (100%) > rename drivers/thermal/{ => > intel}/int340x_thermal/processor_thermal_device.c (100%) > rename drivers/thermal/{ => intel}/intel_bxt_pmic_thermal.c (100%) > rename drivers/thermal/{ => intel}/intel_pch_thermal.c (100%) > rename drivers/thermal/{ => intel}/intel_powerclamp.c (100%) > rename drivers/thermal/{ => intel}/intel_quark_dts_thermal.c (100%) > rename drivers/thermal/{ => intel}/intel_soc_dts_iosf.c (100%) > rename drivers/thermal/{ => intel}/intel_soc_dts_iosf.h (100%) > rename drivers/thermal/{ => intel}/intel_soc_dts_thermal.c (100%) > rename drivers/thermal/{ => intel}/x86_pkg_temp_thermal.c (100%) > > diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig > index 5422523c03f8..772ab9dadda7 100644 > --- a/drivers/thermal/Kconfig > +++ b/drivers/thermal/Kconfig > @@ -326,84 +326,6 @@ config DA9062_THERMAL > zone. > Compatible with the DA9062 and DA9061 PMICs. > > -config INTEL_POWERCLAMP > - tristate "Intel PowerClamp idle injection driver" > - depends on THERMAL > - depends on X86 > - depends on CPU_SUP_INTEL > - help > - Enable this to enable Intel PowerClamp idle injection > driver. This > - enforce idle time which results in more package C-state > residency. The > - user interface is exposed via generic thermal framework. > - > -config X86_PKG_TEMP_THERMAL > - tristate "X86 package temperature thermal driver" > - depends on X86_THERMAL_VECTOR > - select THERMAL_GOV_USER_SPACE > - select THERMAL_WRITABLE_TRIPS > - default m > - help > - Enable this to register CPU digital sensor for package > temperature as > - thermal zone. Each package will have its own thermal zone. > There are > - two trip points which can be set by user to get > notifications via thermal > - notification methods. > - > -config INTEL_SOC_DTS_IOSF_CORE > - tristate > - depends on X86 && PCI > - select IOSF_MBI > - help > - This is becoming a common feature for Intel SoCs to expose > the additional > - digital temperature sensors (DTSs) using side band > interface (IOSF). This > - implements the common set of helper functions to register, > get temperature > - and get/set thresholds on DTSs. > - > -config INTEL_SOC_DTS_THERMAL > - tristate "Intel SoCs DTS thermal driver" > - depends on X86 && PCI && ACPI > - select INTEL_SOC_DTS_IOSF_CORE > - select THERMAL_WRITABLE_TRIPS > - help > - Enable this to register Intel SoCs (e.g. Bay Trail) > platform digital > - temperature sensor (DTS). These SoCs have two additional > DTSs in > - addition to DTSs on CPU cores. Each DTS will be registered > as a > - thermal zone. There are two trip points. One of the trip > point can > - be set by user mode programs to get notifications via > Linux thermal > - notification methods.The other trip is a critical trip > point, which > - was set by the driver based on the TJ MAX temperature. > - > -config INTEL_QUARK_DTS_THERMAL > - tristate "Intel Quark DTS thermal driver" > - depends on X86_INTEL_QUARK > - help > - Enable this to register Intel Quark SoC (e.g. X1000) > platform digital > - temperature sensor (DTS). For X1000 SoC, it has one on-die > DTS. > - The DTS will be registered as a thermal zone. There are > two trip points: > - hot & critical. The critical trip point default value is > set by > - underlying BIOS/Firmware. > - > -menu "ACPI INT340X thermal drivers" > -source drivers/thermal/int340x_thermal/Kconfig > -endmenu > - > -config INTEL_BXT_PMIC_THERMAL > - tristate "Intel Broxton PMIC thermal driver" > - depends on X86 && INTEL_SOC_PMIC_BXTWC && REGMAP > - help > - Select this driver for Intel Broxton PMIC with ADC > channels monitoring > - system temperature measurements and alerts. > - This driver is used for monitoring the ADC channels of > PMIC and handles > - the alert trip point interrupts and notifies the thermal > framework with > - the trip point and temperature details of the zone. > - > -config INTEL_PCH_THERMAL > - tristate "Intel PCH Thermal Reporting Driver" > - depends on X86 && PCI > - help > - Enable this to support thermal reporting on certain intel > PCHs. > - Thermal reporting device will provide temperature reading, > - programmable trip points and other information. > - > config MTK_THERMAL > tristate "Temperature sensor driver for mediatek SoCs" > depends on ARCH_MEDIATEK || COMPILE_TEST > @@ -415,6 +337,11 @@ config MTK_THERMAL > Enable this option if you want to have support for thermal > management > controller present in Mediatek SoCs > > +menu "Intel thermal drivers" > +depends on X86 || X86_INTEL_QUARK || COMPILE_TEST > +source "drivers/thermal/intel/Kconfig" > +endmenu > + > menu "Broadcom thermal drivers" > depends on ARCH_BCM || ARCH_BRCMSTB || ARCH_BCM2835 || COMPILE_TEST > source "drivers/thermal/broadcom/Kconfig" > diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile > index 82bb50dc6423..031f61e7dfe8 100644 > --- a/drivers/thermal/Makefile > +++ b/drivers/thermal/Makefile > @@ -44,16 +44,9 @@ obj-$(CONFIG_IMX_THERMAL) += imx_thermal.o > obj-$(CONFIG_MAX77620_THERMAL) += max77620_thermal.o > obj-$(CONFIG_QORIQ_THERMAL) += qoriq_thermal.o > obj-$(CONFIG_DA9062_THERMAL) += da9062-thermal.o > -obj-$(CONFIG_INTEL_POWERCLAMP) += intel_powerclamp.o > -obj-$(CONFIG_X86_PKG_TEMP_THERMAL) += x86_pkg_temp_thermal.o > -obj-$(CONFIG_INTEL_SOC_DTS_IOSF_CORE) += intel_soc_dts_iosf.o > -obj-$(CONFIG_INTEL_SOC_DTS_THERMAL) += > intel_soc_dts_thermal.o > -obj-$(CONFIG_INTEL_QUARK_DTS_THERMAL) += > intel_quark_dts_thermal.o > +obj-y += intel/ > obj-$(CONFIG_TI_SOC_THERMAL) += ti-soc-thermal/ > -obj-$(CONFIG_INT340X_THERMAL) += int340x_thermal/ > -obj-$(CONFIG_INTEL_BXT_PMIC_THERMAL) += intel_bxt_pmic_thermal.o > -obj-$(CONFIG_INTEL_PCH_THERMAL) += intel_pch_thermal.o > -obj-y += st/ > +obj-$(CONFIG_ST_THERMAL) += st/ it's better to do one thing in one patch. I will apply the patch, but without this line change. thanks, rui > obj-$(CONFIG_QCOM_TSENS) += qcom/ > obj-y += tegra/ > obj-$(CONFIG_HISI_THERMAL) += hisi_thermal.o > diff --git a/drivers/thermal/intel/Kconfig > b/drivers/thermal/intel/Kconfig > new file mode 100644 > index 000000000000..9c06d4ad7c97 > --- /dev/null > +++ b/drivers/thermal/intel/Kconfig > @@ -0,0 +1,77 @@ > +config INTEL_POWERCLAMP > + tristate "Intel PowerClamp idle injection driver" > + depends on THERMAL > + depends on X86 > + depends on CPU_SUP_INTEL > + help > + Enable this to enable Intel PowerClamp idle injection > driver. This > + enforce idle time which results in more package C-state > residency. The > + user interface is exposed via generic thermal framework. > + > +config X86_PKG_TEMP_THERMAL > + tristate "X86 package temperature thermal driver" > + depends on X86_THERMAL_VECTOR > + select THERMAL_GOV_USER_SPACE > + select THERMAL_WRITABLE_TRIPS > + default m > + help > + Enable this to register CPU digital sensor for package > temperature as > + thermal zone. Each package will have its own thermal zone. > There are > + two trip points which can be set by user to get > notifications via thermal > + notification methods. > + > +config INTEL_SOC_DTS_IOSF_CORE > + tristate > + depends on X86 && PCI > + select IOSF_MBI > + help > + This is becoming a common feature for Intel SoCs to expose > the additional > + digital temperature sensors (DTSs) using side band > interface (IOSF). This > + implements the common set of helper functions to register, > get temperature > + and get/set thresholds on DTSs. > + > +config INTEL_SOC_DTS_THERMAL > + tristate "Intel SoCs DTS thermal driver" > + depends on X86 && PCI && ACPI > + select INTEL_SOC_DTS_IOSF_CORE > + select THERMAL_WRITABLE_TRIPS > + help > + Enable this to register Intel SoCs (e.g. Bay Trail) > platform digital > + temperature sensor (DTS). These SoCs have two additional > DTSs in > + addition to DTSs on CPU cores. Each DTS will be registered > as a > + thermal zone. There are two trip points. One of the trip > point can > + be set by user mode programs to get notifications via > Linux thermal > + notification methods.The other trip is a critical trip > point, which > + was set by the driver based on the TJ MAX temperature. > + > +config INTEL_QUARK_DTS_THERMAL > + tristate "Intel Quark DTS thermal driver" > + depends on X86_INTEL_QUARK > + help > + Enable this to register Intel Quark SoC (e.g. X1000) > platform digital > + temperature sensor (DTS). For X1000 SoC, it has one on-die > DTS. > + The DTS will be registered as a thermal zone. There are > two trip points: > + hot & critical. The critical trip point default value is > set by > + underlying BIOS/Firmware. > + > +menu "ACPI INT340X thermal drivers" > +source drivers/thermal/intel/int340x_thermal/Kconfig > +endmenu > + > +config INTEL_BXT_PMIC_THERMAL > + tristate "Intel Broxton PMIC thermal driver" > + depends on X86 && INTEL_SOC_PMIC_BXTWC && REGMAP > + help > + Select this driver for Intel Broxton PMIC with ADC > channels monitoring > + system temperature measurements and alerts. > + This driver is used for monitoring the ADC channels of > PMIC and handles > + the alert trip point interrupts and notifies the thermal > framework with > + the trip point and temperature details of the zone. > + > +config INTEL_PCH_THERMAL > + tristate "Intel PCH Thermal Reporting Driver" > + depends on X86 && PCI > + help > + Enable this to support thermal reporting on certain intel > PCHs. > + Thermal reporting device will provide temperature reading, > + programmable trip points and other information. > diff --git a/drivers/thermal/intel/Makefile > b/drivers/thermal/intel/Makefile > new file mode 100644 > index 000000000000..0d9736ced5d4 > --- /dev/null > +++ b/drivers/thermal/intel/Makefile > @@ -0,0 +1,12 @@ > +# SPDX-License-Identifier: GPL-2.0 > +# > +# Makefile for various Intel thermal drivers. > + > +obj-$(CONFIG_INTEL_POWERCLAMP) += intel_powerclamp.o > +obj-$(CONFIG_X86_PKG_TEMP_THERMAL) += x86_pkg_temp_thermal.o > +obj-$(CONFIG_INTEL_SOC_DTS_IOSF_CORE) += intel_soc_dts_iosf.o > +obj-$(CONFIG_INTEL_SOC_DTS_THERMAL) += > intel_soc_dts_thermal.o > +obj-$(CONFIG_INTEL_QUARK_DTS_THERMAL) += > intel_quark_dts_thermal.o > +obj-$(CONFIG_INT340X_THERMAL) += int340x_thermal/ > +obj-$(CONFIG_INTEL_BXT_PMIC_THERMAL) += intel_bxt_pmic_thermal.o > +obj-$(CONFIG_INTEL_PCH_THERMAL) += intel_pch_thermal.o > diff --git a/drivers/thermal/int340x_thermal/Kconfig > b/drivers/thermal/intel/int340x_thermal/Kconfig > similarity index 100% > rename from drivers/thermal/int340x_thermal/Kconfig > rename to drivers/thermal/intel/int340x_thermal/Kconfig > diff --git a/drivers/thermal/int340x_thermal/Makefile > b/drivers/thermal/intel/int340x_thermal/Makefile > similarity index 100% > rename from drivers/thermal/int340x_thermal/Makefile > rename to drivers/thermal/intel/int340x_thermal/Makefile > diff --git a/drivers/thermal/int340x_thermal/acpi_thermal_rel.c > b/drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.c > similarity index 100% > rename from drivers/thermal/int340x_thermal/acpi_thermal_rel.c > rename to drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.c > diff --git a/drivers/thermal/int340x_thermal/acpi_thermal_rel.h > b/drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.h > similarity index 100% > rename from drivers/thermal/int340x_thermal/acpi_thermal_rel.h > rename to drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.h > diff --git a/drivers/thermal/int340x_thermal/int3400_thermal.c > b/drivers/thermal/intel/int340x_thermal/int3400_thermal.c > similarity index 100% > rename from drivers/thermal/int340x_thermal/int3400_thermal.c > rename to drivers/thermal/intel/int340x_thermal/int3400_thermal.c > diff --git a/drivers/thermal/int340x_thermal/int3402_thermal.c > b/drivers/thermal/intel/int340x_thermal/int3402_thermal.c > similarity index 100% > rename from drivers/thermal/int340x_thermal/int3402_thermal.c > rename to drivers/thermal/intel/int340x_thermal/int3402_thermal.c > diff --git a/drivers/thermal/int340x_thermal/int3403_thermal.c > b/drivers/thermal/intel/int340x_thermal/int3403_thermal.c > similarity index 100% > rename from drivers/thermal/int340x_thermal/int3403_thermal.c > rename to drivers/thermal/intel/int340x_thermal/int3403_thermal.c > diff --git a/drivers/thermal/int340x_thermal/int3406_thermal.c > b/drivers/thermal/intel/int340x_thermal/int3406_thermal.c > similarity index 100% > rename from drivers/thermal/int340x_thermal/int3406_thermal.c > rename to drivers/thermal/intel/int340x_thermal/int3406_thermal.c > diff --git a/drivers/thermal/int340x_thermal/int340x_thermal_zone.c > b/drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.c > similarity index 100% > rename from drivers/thermal/int340x_thermal/int340x_thermal_zone.c > rename to > drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.c > diff --git a/drivers/thermal/int340x_thermal/int340x_thermal_zone.h > b/drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.h > similarity index 100% > rename from drivers/thermal/int340x_thermal/int340x_thermal_zone.h > rename to > drivers/thermal/intel/int340x_thermal/int340x_thermal_zone.h > diff --git > a/drivers/thermal/int340x_thermal/processor_thermal_device.c > b/drivers/thermal/intel/int340x_thermal/processor_thermal_device.c > similarity index 100% > rename from > drivers/thermal/int340x_thermal/processor_thermal_device.c > rename to > drivers/thermal/intel/int340x_thermal/processor_thermal_device.c > diff --git a/drivers/thermal/intel_bxt_pmic_thermal.c > b/drivers/thermal/intel/intel_bxt_pmic_thermal.c > similarity index 100% > rename from drivers/thermal/intel_bxt_pmic_thermal.c > rename to drivers/thermal/intel/intel_bxt_pmic_thermal.c > diff --git a/drivers/thermal/intel_pch_thermal.c > b/drivers/thermal/intel/intel_pch_thermal.c > similarity index 100% > rename from drivers/thermal/intel_pch_thermal.c > rename to drivers/thermal/intel/intel_pch_thermal.c > diff --git a/drivers/thermal/intel_powerclamp.c > b/drivers/thermal/intel/intel_powerclamp.c > similarity index 100% > rename from drivers/thermal/intel_powerclamp.c > rename to drivers/thermal/intel/intel_powerclamp.c > diff --git a/drivers/thermal/intel_quark_dts_thermal.c > b/drivers/thermal/intel/intel_quark_dts_thermal.c > similarity index 100% > rename from drivers/thermal/intel_quark_dts_thermal.c > rename to drivers/thermal/intel/intel_quark_dts_thermal.c > diff --git a/drivers/thermal/intel_soc_dts_iosf.c > b/drivers/thermal/intel/intel_soc_dts_iosf.c > similarity index 100% > rename from drivers/thermal/intel_soc_dts_iosf.c > rename to drivers/thermal/intel/intel_soc_dts_iosf.c > diff --git a/drivers/thermal/intel_soc_dts_iosf.h > b/drivers/thermal/intel/intel_soc_dts_iosf.h > similarity index 100% > rename from drivers/thermal/intel_soc_dts_iosf.h > rename to drivers/thermal/intel/intel_soc_dts_iosf.h > diff --git a/drivers/thermal/intel_soc_dts_thermal.c > b/drivers/thermal/intel/intel_soc_dts_thermal.c > similarity index 100% > rename from drivers/thermal/intel_soc_dts_thermal.c > rename to drivers/thermal/intel/intel_soc_dts_thermal.c > diff --git a/drivers/thermal/x86_pkg_temp_thermal.c > b/drivers/thermal/intel/x86_pkg_temp_thermal.c > similarity index 100% > rename from drivers/thermal/x86_pkg_temp_thermal.c > rename to drivers/thermal/intel/x86_pkg_temp_thermal.c ^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH v3 2/2] drivers: thermal: Move QCOM_SPMI_TEMP_ALARM into the qcom subdir 2018-11-27 18:58 [PATCH v3 0/2] driver: thermal: Move some drivers into subdirs Amit Kucheria 2018-11-27 18:58 ` [PATCH v3 1/2] drivers: thermal: Move various drivers for intel platforms into a subdir Amit Kucheria @ 2018-11-27 18:58 ` Amit Kucheria 1 sibling, 0 replies; 4+ messages in thread From: Amit Kucheria @ 2018-11-27 18:58 UTC (permalink / raw) To: linux-kernel; +Cc: rui.zhang, edubezval, linux-pm, Daniel Lezcano This cleans up the directory a bit allowing just one place to look for thermal related drivers for QCOM platforms instead of being scattered in the root directory and the qcom/ subdirectory. Compile-tested with ARCH=arm64 defconfig and the driver explicitly enabled with menuconfig. Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org> Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org> --- drivers/thermal/Kconfig | 11 ----------- drivers/thermal/Makefile | 1 - drivers/thermal/qcom/Kconfig | 11 +++++++++++ drivers/thermal/qcom/Makefile | 1 + drivers/thermal/{ => qcom}/qcom-spmi-temp-alarm.c | 0 5 files changed, 12 insertions(+), 12 deletions(-) rename drivers/thermal/{ => qcom}/qcom-spmi-temp-alarm.c (100%) diff --git a/drivers/thermal/Kconfig b/drivers/thermal/Kconfig index 772ab9dadda7..344f6459862b 100644 --- a/drivers/thermal/Kconfig +++ b/drivers/thermal/Kconfig @@ -374,17 +374,6 @@ config TANGO_THERMAL source "drivers/thermal/tegra/Kconfig" -config QCOM_SPMI_TEMP_ALARM - tristate "Qualcomm SPMI PMIC Temperature Alarm" - depends on OF && SPMI && IIO - select REGMAP_SPMI - help - This enables a thermal sysfs driver for Qualcomm plug-and-play (QPNP) - PMIC devices. It shows up in sysfs as a thermal sensor with multiple - trip points. The temperature reported by the thermal sensor reflects the - real time die temperature if an ADC is present or an estimate of the - temperature based upon the over temperature stage value. - config GENERIC_ADC_THERMAL tristate "Generic ADC based thermal sensor" depends on IIO diff --git a/drivers/thermal/Makefile b/drivers/thermal/Makefile index 031f61e7dfe8..415361685480 100644 --- a/drivers/thermal/Makefile +++ b/drivers/thermal/Makefile @@ -29,7 +29,6 @@ thermal_sys-$(CONFIG_DEVFREQ_THERMAL) += devfreq_cooling.o # platform thermal drivers obj-y += broadcom/ -obj-$(CONFIG_QCOM_SPMI_TEMP_ALARM) += qcom-spmi-temp-alarm.o obj-$(CONFIG_SPEAR_THERMAL) += spear_thermal.o obj-$(CONFIG_ROCKCHIP_THERMAL) += rockchip_thermal.o obj-$(CONFIG_RCAR_THERMAL) += rcar_thermal.o diff --git a/drivers/thermal/qcom/Kconfig b/drivers/thermal/qcom/Kconfig index be32e5abce3c..cdb455ffd575 100644 --- a/drivers/thermal/qcom/Kconfig +++ b/drivers/thermal/qcom/Kconfig @@ -9,3 +9,14 @@ config QCOM_TSENS thermal zone device via the mode file results in disabling the sensor. Also able to set threshold temperature for both hot and cold and update when a threshold is reached. + +config QCOM_SPMI_TEMP_ALARM + tristate "Qualcomm SPMI PMIC Temperature Alarm" + depends on OF && SPMI && IIO + select REGMAP_SPMI + help + This enables a thermal sysfs driver for Qualcomm plug-and-play (QPNP) + PMIC devices. It shows up in sysfs as a thermal sensor with multiple + trip points. The temperature reported by the thermal sensor reflects the + real time die temperature if an ADC is present or an estimate of the + temperature based upon the over temperature stage value. diff --git a/drivers/thermal/qcom/Makefile b/drivers/thermal/qcom/Makefile index a821929ede0b..717a08600bb5 100644 --- a/drivers/thermal/qcom/Makefile +++ b/drivers/thermal/qcom/Makefile @@ -1,2 +1,3 @@ obj-$(CONFIG_QCOM_TSENS) += qcom_tsens.o qcom_tsens-y += tsens.o tsens-common.o tsens-8916.o tsens-8974.o tsens-8960.o tsens-v2.o +obj-$(CONFIG_QCOM_SPMI_TEMP_ALARM) += qcom-spmi-temp-alarm.o diff --git a/drivers/thermal/qcom-spmi-temp-alarm.c b/drivers/thermal/qcom/qcom-spmi-temp-alarm.c similarity index 100% rename from drivers/thermal/qcom-spmi-temp-alarm.c rename to drivers/thermal/qcom/qcom-spmi-temp-alarm.c -- 2.17.1 ^ permalink raw reply related [flat|nested] 4+ messages in thread
end of thread, other threads:[~2018-12-05 15:16 UTC | newest] Thread overview: 4+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2018-11-27 18:58 [PATCH v3 0/2] driver: thermal: Move some drivers into subdirs Amit Kucheria 2018-11-27 18:58 ` [PATCH v3 1/2] drivers: thermal: Move various drivers for intel platforms into a subdir Amit Kucheria 2018-12-05 15:16 ` Zhang Rui 2018-11-27 18:58 ` [PATCH v3 2/2] drivers: thermal: Move QCOM_SPMI_TEMP_ALARM into the qcom subdir Amit Kucheria
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).