[PATCH v6 0/3] Enable IPQ9574 TSENS support

[PATCH v6 0/3] Enable IPQ9574 TSENS support

[Varadarajan Narayanan]

This patch set enables tsens in IPQ9574

Depends on
	https://lore.kernel.org/linux-arm-msm/20230406061314.10916-1-quic_devipriy@quicinc.com/
[v6]:
	Remove comments from tsens node in dtsi
[v5]:
	Fix make DT_CHECKER_FLAGS=-m dt_binding_check and make dtbs_check errors without removing existing entries

[v4]:
	Drop the sm6375-tsens and qcm2290-tsens related bindings
	fix as it is already posted

	Remove unnecessary changes from previous version

[v3]:
	Fix make DT_CHECKER_FLAGS=-m dt_binding_check and make dtbs_check errors

[v2]:
	Drop the driver change (https://lore.kernel.org/lkml/b45d33d38a334aabbd52c83b0d6028af1f4c74c8.1682682753.git.quic_varada@quicinc.com/)
	since the tsens device is compatible with 8074's tsens
	and use 8074's compatible itself

	Rename clusterX nodes as cpussX

[v1]:
	Fix DT node names

[v0]:
	Initial patch introducing TSENS support

Praveenkumar I (1):
  dt-bindings: thermal: tsens: Add ipq9574 compatible

Varadarajan Narayanan (2):
  arm64: dts: qcom: ipq9574: add tsens node
  arm64: dts: qcom: ipq9574: add thermal zone nodes

 .../devicetree/bindings/thermal/qcom-tsens.yaml    |   6 +
 arch/arm64/boot/dts/qcom/ipq9574.dtsi              | 218 +++++++++++++++++++++
 2 files changed, 224 insertions(+)

-- 
2.7.4

[PATCH v6 1/3] dt-bindings: thermal: tsens: Add ipq9574 compatible

[Varadarajan Narayanan]

From: Praveenkumar I <quic_ipkumar@quicinc.com>

Qualcomm IPQ9574 has tsens v2.3.1 block, which is similar to IPQ8074 tsens.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
[v5]:
        Fix dt_binding_check & dtbs_check errors without removing existing entries
[v4]:
        Add description about IPQ9574 and remove unnecessary
        additions to the file
[v3]:
        Fix dt_binding_check & dtbs_check errors (Used
        Documentation/devicetree/bindings/display/allwinner,sun4i-a10-tcon.yaml
        as reference/example)

        Drop 'Acked-by: Rob Herring' as suggested in review

[v2]:
        Thanks to Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
        for the tip to make qcom,ipq8074-tsens as fallback.
---
 Documentation/devicetree/bindings/thermal/qcom-tsens.yaml | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
index d1ec963..e7d0341 100644
--- a/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
+++ b/Documentation/devicetree/bindings/thermal/qcom-tsens.yaml
@@ -67,6 +67,12 @@ properties:
         enum:
           - qcom,ipq8074-tsens
 
+      - description: v2 of TSENS with combined interrupt
+        items:
+          - enum:
+              - qcom,ipq9574-tsens
+          - const: qcom,ipq8074-tsens
+
   reg:
     items:
       - description: TM registers
-- 
2.7.4

[PATCH v6 2/3] arm64: dts: qcom: ipq9574: add tsens node

[Varadarajan Narayanan]

IPQ9574 has a tsens v2.3.1 peripheral which monitors temperatures
around the various subsystems on the die.

Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Co-developed-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
[v6]:
	Remove comments from tsens node
[v5]:
	Pad "reg" address value to 8 digits

[v2]:
	Add "qcom,ipq8074-tsens" as fallback compatible
---
 arch/arm64/boot/dts/qcom/ipq9574.dtsi | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
index 0baeb10..a436bf2 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -206,6 +206,16 @@
 			#size-cells = <1>;
 		};
 
+		tsens: thermal-sensor@4a9000 {
+			compatible = "qcom,ipq9574-tsens", "qcom,ipq8074-tsens";
+			reg = <0x004a9000 0x1000>,
+			      <0x004a8000 0x1000>;
+			interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "combined";
+			#qcom,sensors = <16>;
+			#thermal-sensor-cells = <1>;
+		};
+
 		tlmm: pinctrl@1000000 {
 			compatible = "qcom,ipq9574-tlmm";
 			reg = <0x01000000 0x300000>;
-- 
2.7.4

[PATCH v6 3/3] arm64: dts: qcom: ipq9574: add thermal zone nodes

[Varadarajan Narayanan]

This patch adds thermal zone nodes for the various
sensors present in IPQ9574

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Co-developed-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
---
[v2]:
	Rename clusterX nodes as cpussX nodes

[v1]:
	Fix node names
---
 arch/arm64/boot/dts/qcom/ipq9574.dtsi | 208 ++++++++++++++++++++++++++++++++++
 1 file changed, 208 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
index a436bf2..c17722b 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -592,6 +592,214 @@
 		};
 	};
 
+	thermal-zones {
+		nss-top-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 3>;
+
+			trips {
+				nss-top-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		ubi-0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 4>;
+
+			trips {
+				ubi_0-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		ubi-1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 5>;
+
+			trips {
+				ubi_1-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		ubi-2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 6>;
+
+			trips {
+				ubi_2-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		ubi-3-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 7>;
+
+			trips {
+				ubi_3-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 8>;
+
+			trips {
+				cpu-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 9>;
+
+			trips {
+				cpu-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu0-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 10>;
+
+			trips {
+				cpu-critical {
+					temperature = <120000>;
+					hysteresis = <10000>;
+					type = "critical";
+				};
+
+				cpu-passive {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu1-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 11>;
+
+			trips {
+				cpu-critical {
+					temperature = <120000>;
+					hysteresis = <10000>;
+					type = "critical";
+				};
+
+				cpu-passive {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu2-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 12>;
+
+			trips {
+				cpu-critical {
+					temperature = <120000>;
+					hysteresis = <10000>;
+					type = "critical";
+				};
+
+				cpu-passive {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		cpu3-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 13>;
+
+			trips {
+				cpu-critical {
+					temperature = <120000>;
+					hysteresis = <10000>;
+					type = "critical";
+				};
+
+				cpu-passive {
+					temperature = <110000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+		};
+
+		wcss-phyb-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 14>;
+
+			trips {
+				wcss_phyb-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		top-glue-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsens 15>;
+
+			trips {
+				top_glue-critical {
+					temperature = <125000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
-- 
2.7.4

Re: [PATCH v6 1/3] dt-bindings: thermal: tsens: Add ipq9574 compatible

[Daniel Lezcano]

On 07/06/2023 10:53, Varadarajan Narayanan wrote:
> From: Praveenkumar I <quic_ipkumar@quicinc.com>
> 
> Qualcomm IPQ9574 has tsens v2.3.1 block, which is similar to IPQ8074 tsens.
> 
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
> ---

Applied patch 1, thank

-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog

Re: (subset) [PATCH v6 0/3] Enable IPQ9574 TSENS support

[Bjorn Andersson]

On Wed, 7 Jun 2023 14:23:07 +0530, Varadarajan Narayanan wrote:
> This patch set enables tsens in IPQ9574
> 
> Depends on
> 	https://lore.kernel.org/linux-arm-msm/20230406061314.10916-1-quic_devipriy@quicinc.com/
> [v6]:
> 	Remove comments from tsens node in dtsi
> [v5]:
> 	Fix make DT_CHECKER_FLAGS=-m dt_binding_check and make dtbs_check errors without removing existing entries
> 
> [...]

Applied, thanks!

[2/3] arm64: dts: qcom: ipq9574: add tsens node
      commit: 2e0580e10e919b544d7be1b2b8fc48fc7dff1322
[3/3] arm64: dts: qcom: ipq9574: add thermal zone nodes
      commit: 581dcbe60b6390c633f318a29db41d1df642e6d8

Best regards,
-- 
Bjorn Andersson <andersson@kernel.org>