* [PATCH v2 2/3] power: supply: rt9756: Add Richtek RT9756 smart cap divider charger
2025-07-31 5:48 [PATCH v2 0/3] Add Richtek RT9756 Smart-Cap divider charger cy_huang
2025-07-31 5:48 ` [PATCH v2 1/3] dt-bindings: power: supply: Add Richtek RT9756 smart cap " cy_huang
@ 2025-07-31 5:48 ` cy_huang
2025-07-31 5:48 ` [PATCH v2 3/3] Documentation: power: rt9756: Document exported sysfs entries cy_huang
2 siblings, 0 replies; 5+ messages in thread
From: cy_huang @ 2025-07-31 5:48 UTC (permalink / raw)
To: Sebastian Reichel, Rob Herring, Krzysztof Kozlowski
Cc: Conor Dooley, ChiYuan Huang, devicetree, linux-pm, linux-kernel
From: ChiYuan Huang <cy_huang@richtek.com>
Add support for RT9756 smart cap divider charger.
The RT9759 is a high efficiency and high charge current charger. The
maximum charge current is up to 8A. It integrates a dual-phase charge
pump core with ADC monitoring.
Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
---
drivers/power/supply/Kconfig | 15 +
drivers/power/supply/Makefile | 1 +
drivers/power/supply/rt9756.c | 932 ++++++++++++++++++++++++++++++++++
3 files changed, 948 insertions(+)
create mode 100644 drivers/power/supply/rt9756.c
diff --git a/drivers/power/supply/Kconfig b/drivers/power/supply/Kconfig
index 79ddb006e2da..aff192474140 100644
--- a/drivers/power/supply/Kconfig
+++ b/drivers/power/supply/Kconfig
@@ -909,6 +909,21 @@ config CHARGER_RT9471
This driver can also be built as a module. If so, the module will be
called rt9471.
+config CHARGER_RT9756
+ tristate "Richtek RT9756 smart cap divider charger driver"
+ depends on I2C
+ select REGMAP_I2C
+ select LINEAR_RANGES
+ help
+ This adds support for Richtek RT9756 smart cap divider charger driver.
+ It's a high efficiency and high charge current charger. the device
+ integrates smart cap divider topology with 9-channel high speed
+ ADCs that can provide input and output voltage, current and
+ temperature monitoring.
+
+ This driver can also be built as a module. If so, the module will be
+ called rt9756.
+
config CHARGER_CROS_USBPD
tristate "ChromeOS EC based USBPD charger"
depends on CROS_USBPD_NOTIFY
diff --git a/drivers/power/supply/Makefile b/drivers/power/supply/Makefile
index 4f5f8e3507f8..a529f217f0ad 100644
--- a/drivers/power/supply/Makefile
+++ b/drivers/power/supply/Makefile
@@ -62,6 +62,7 @@ obj-$(CONFIG_CHARGER_RT5033) += rt5033_charger.o
obj-$(CONFIG_CHARGER_RT9455) += rt9455_charger.o
obj-$(CONFIG_CHARGER_RT9467) += rt9467-charger.o
obj-$(CONFIG_CHARGER_RT9471) += rt9471.o
+obj-$(CONFIG_CHARGER_RT9756) += rt9756.o
obj-$(CONFIG_BATTERY_TWL4030_MADC) += twl4030_madc_battery.o
obj-$(CONFIG_CHARGER_88PM860X) += 88pm860x_charger.o
obj-$(CONFIG_BATTERY_RX51) += rx51_battery.o
diff --git a/drivers/power/supply/rt9756.c b/drivers/power/supply/rt9756.c
new file mode 100644
index 000000000000..99bfbcc37272
--- /dev/null
+++ b/drivers/power/supply/rt9756.c
@@ -0,0 +1,932 @@
+// SPDX-License-Identifier: GPL-2.0-only
+//
+// Copyright (C) 2025 Richtek Technology Corp.
+//
+// Authors: ChiYuan Huang <cy_huang@richtek.com>
+
+#include <linux/atomic.h>
+#include <linux/cleanup.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/linear_range.h>
+#include <linux/interrupt.h>
+#include <linux/mod_devicetable.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/power_supply.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/sysfs.h>
+#include <linux/util_macros.h>
+
+#define RT9756_REG_INTFLAG1 0x0B
+#define RT9756_REG_INTFLAG2 0x0D
+#define RT9756_REG_INTFLAG3 0x0F
+#define RT9756_REG_ADCCTL 0x11
+#define RT9756_REG_VBUSADC 0x12
+#define RT9756_REG_BC12FLAG 0x45
+#define RT9756_REG_INTFLAG4 0x49
+
+/* Flag1 */
+#define RT9756_EVT_BUSOVP BIT(3)
+#define RT9756_EVT_BUSOCP BIT(2)
+#define RT9756_EVT_BUSUCP BIT(0)
+/* Flag2 */
+#define RT9756_EVT_BATOVP BIT(7)
+#define RT9756_EVT_BATOCP BIT(6)
+#define RT9756_EVT_TDIEOTP BIT(3)
+#define RT9756_EVT_VBUSLOW_ERR BIT(2)
+#define RT9756_EVT_VAC_INSERT BIT(0)
+/* Flag3 */
+#define RT9756_EVT_WDT BIT(5)
+#define RT9756_EVT_VAC_UVLO BIT(4)
+/* ADCCTL */
+#define RT9756_ADCEN_MASK BIT(7)
+#define RT9756_ADCONCE_MASK BIT(6)
+/* Bc12_flag */
+#define RT9756_EVT_BC12_DONE BIT(3)
+/* Flag4 */
+#define RT9756_EVT_OUTOVP BIT(0)
+
+#define RICHTEK_DEVID 7
+#define RT9756_REVID 0
+#define RT9756A_REVID 1
+#define RT9757_REVID 2
+#define RT9757A_REVID 3
+#define RT9756_ADC_CONVTIME 1200
+#define RT9756_ADC_MAXWAIT 16000
+
+enum rt9756_model {
+ MODEL_RT9756 = 0,
+ MODEL_RT9757,
+ MODEL_RT9770,
+ MODEL_MAX
+};
+
+enum rt9756_adc_chan {
+ ADC_VBUS = 0,
+ ADC_IBUS,
+ ADC_VBAT,
+ ADC_IBAT,
+ ADC_TDIE,
+ ADC_MAX_CHANNEL
+};
+
+enum rt9756_usb_type {
+ USB_NO_VBUS = 0,
+ USB_SDP = 2,
+ USB_NSTD,
+ USB_DCP,
+ USB_CDP,
+ MAX_USB_TYPE
+};
+
+enum rt9756_fields {
+ F_VBATOVP = 0,
+ F_VBATOVP_EN,
+ F_IBATOCP,
+ F_IBATOCP_EN,
+ F_VBUSOVP,
+ F_VBUSOVP_EN,
+ F_IBUSOCP,
+ F_IBUSOCP_EN,
+ F_SWITCHING,
+ F_REG_RST,
+ F_CHG_EN,
+ F_OP_MODE,
+ F_WDT_DIS,
+ F_WDT_TMR,
+ F_DEV_ID,
+ F_BC12_EN,
+ F_USB_STATE,
+ F_VBUS_STATE,
+ F_IBAT_RSEN,
+ F_REVISION,
+ F_MAX_FIELD
+};
+
+enum rt9756_ranges {
+ R_VBATOVP = 0,
+ R_IBATOCP,
+ R_VBUSOVP,
+ R_IBUSOCP,
+ R_MAX_RANGE
+};
+
+static const struct reg_field rt9756_chg_fields[F_MAX_FIELD] = {
+ [F_VBATOVP] = REG_FIELD(0x08, 0, 4),
+ [F_VBATOVP_EN] = REG_FIELD(0x08, 7, 7),
+ [F_IBATOCP] = REG_FIELD(0x09, 0, 5),
+ [F_IBATOCP_EN] = REG_FIELD(0x09, 7, 7),
+ [F_VBUSOVP] = REG_FIELD(0x06, 0, 5),
+ [F_VBUSOVP_EN] = REG_FIELD(0x06, 7, 7),
+ [F_IBUSOCP] = REG_FIELD(0x07, 0, 4),
+ [F_IBUSOCP_EN] = REG_FIELD(0x07, 5, 5),
+ [F_SWITCHING] = REG_FIELD(0x5c, 7, 7),
+ [F_REG_RST] = REG_FIELD(0x00, 7, 7),
+ [F_CHG_EN] = REG_FIELD(0x00, 6, 6),
+ [F_OP_MODE] = REG_FIELD(0x00, 5, 5),
+ [F_WDT_DIS] = REG_FIELD(0x00, 3, 3),
+ [F_WDT_TMR] = REG_FIELD(0x00, 0, 2),
+ [F_DEV_ID] = REG_FIELD(0x03, 0, 3),
+ [F_BC12_EN] = REG_FIELD(0x44, 7, 7),
+ [F_USB_STATE] = REG_FIELD(0x46, 5, 7),
+ [F_VBUS_STATE] = REG_FIELD(0x4c, 0, 0),
+ [F_IBAT_RSEN] = REG_FIELD(0x5e, 0, 1),
+ [F_REVISION] = REG_FIELD(0x62, 0, 1),
+};
+
+static const struct reg_field rt9770_chg_fields[F_MAX_FIELD] = {
+ [F_VBATOVP] = REG_FIELD(0x08, 0, 4),
+ [F_VBATOVP_EN] = REG_FIELD(0x08, 7, 7),
+ [F_IBATOCP] = REG_FIELD(0x09, 0, 5),
+ [F_IBATOCP_EN] = REG_FIELD(0x09, 7, 7),
+ [F_VBUSOVP] = REG_FIELD(0x06, 0, 5),
+ [F_VBUSOVP_EN] = REG_FIELD(0x06, 7, 7),
+ [F_IBUSOCP] = REG_FIELD(0x07, 0, 4),
+ [F_IBUSOCP_EN] = REG_FIELD(0x07, 5, 5),
+ [F_SWITCHING] = REG_FIELD(0x5c, 7, 7),
+ [F_REG_RST] = REG_FIELD(0x00, 7, 7),
+ [F_CHG_EN] = REG_FIELD(0x00, 6, 6),
+ [F_OP_MODE] = REG_FIELD(0x00, 5, 5),
+ [F_WDT_DIS] = REG_FIELD(0x00, 3, 3),
+ [F_WDT_TMR] = REG_FIELD(0x00, 0, 2),
+ [F_DEV_ID] = REG_FIELD(0x60, 0, 3),
+ [F_BC12_EN] = REG_FIELD(0x03, 7, 7),
+ [F_USB_STATE] = REG_FIELD(0x02, 5, 7),
+ [F_VBUS_STATE] = REG_FIELD(0x4c, 0, 0),
+ [F_IBAT_RSEN] = REG_FIELD(0x5e, 0, 1),
+ [F_REVISION] = REG_FIELD(0x62, 3, 7),
+};
+
+/* All converted to microvolt or microamp */
+static const struct linear_range rt9756_chg_ranges[R_MAX_RANGE] = {
+ LINEAR_RANGE_IDX(R_VBATOVP, 4200000, 0, 31, 25000),
+ LINEAR_RANGE_IDX(R_IBATOCP, 2000000, 0, 63, 100000),
+ LINEAR_RANGE_IDX(R_VBUSOVP, 3000000, 0, 63, 50000),
+ LINEAR_RANGE_IDX(R_IBUSOCP, 1000000, 0, 31, 250000),
+};
+
+struct charger_event {
+ unsigned int flag1;
+ unsigned int flag2;
+ unsigned int flag3;
+ unsigned int flag4;
+};
+
+struct rt9756_data {
+ struct device *dev;
+ struct regmap *regmap;
+ struct regmap_field *rm_fields[F_MAX_FIELD];
+ struct power_supply *psy;
+ struct mutex adc_lock;
+ struct power_supply_desc psy_desc;
+ struct charger_event chg_evt;
+ unsigned int rg_resistor;
+ unsigned int real_resistor;
+ enum rt9756_model model;
+ atomic_t usb_type;
+};
+
+struct rt975x_dev_data {
+ const struct regmap_config *regmap_config;
+ const struct reg_field *reg_fields;
+ const struct reg_sequence *init_regs;
+ size_t num_init_regs;
+ int (*check_device_model)(struct rt9756_data *data);
+};
+
+static int rt9756_get_value_field_range(struct rt9756_data *data, enum rt9756_fields en_field,
+ enum rt9756_fields field, enum rt9756_ranges rsel, int *val)
+{
+ const struct linear_range *range = rt9756_chg_ranges + rsel;
+ unsigned int enable, selector, value;
+ int ret;
+
+ ret = regmap_field_read(data->rm_fields[en_field], &enable);
+ if (ret)
+ return ret;
+
+ if (!enable) {
+ *val = 0;
+ return 0;
+ }
+
+ ret = regmap_field_read(data->rm_fields[field], &selector);
+ if (ret)
+ return ret;
+
+ ret = linear_range_get_value(range, selector, &value);
+ if (ret)
+ return ret;
+
+ *val = (int)value;
+
+ return 0;
+}
+
+static int rt9756_set_value_field_range(struct rt9756_data *data, enum rt9756_fields en_field,
+ enum rt9756_fields field, enum rt9756_ranges rsel, int val)
+{
+ const struct linear_range *range = rt9756_chg_ranges + rsel;
+ unsigned int selector, value;
+ int ret;
+
+ if (!val)
+ return regmap_field_write(data->rm_fields[en_field], 0);
+
+ value = (unsigned int)val;
+ linear_range_get_selector_within(range, value, &selector);
+ ret = regmap_field_write(data->rm_fields[field], selector);
+ if (ret)
+ return ret;
+
+ return regmap_field_write(data->rm_fields[en_field], 1);
+}
+
+static int rt9756_get_adc(struct rt9756_data *data, enum rt9756_adc_chan chan,
+ int *val)
+{
+ struct regmap *regmap = data->regmap;
+ unsigned int reg_addr = RT9756_REG_VBUSADC + chan * 2;
+ unsigned int mask = RT9756_ADCEN_MASK | RT9756_ADCONCE_MASK;
+ unsigned int shift = 0, adc_cntl;
+ __be16 raws;
+ int scale, offset = 0, ret;
+
+ guard(mutex)(&data->adc_lock);
+
+ ret = regmap_update_bits(regmap, RT9756_REG_ADCCTL, mask, mask);
+ if (ret)
+ return ret;
+
+ ret = regmap_read_poll_timeout(regmap, RT9756_REG_ADCCTL, adc_cntl,
+ !(adc_cntl & RT9756_ADCEN_MASK),
+ RT9756_ADC_CONVTIME, RT9756_ADC_MAXWAIT);
+ if (ret && ret != -ETIMEDOUT)
+ return ret;
+
+ ret = regmap_raw_read(regmap, reg_addr, &raws, sizeof(raws));
+ if (ret)
+ return ret;
+
+ /*
+ * TDIE LSB 1'c, others LSB 1000uV or 1000uA.
+ * Rsense ratio is needed for IBAT channel
+ */
+ if (chan == ADC_TDIE) {
+ scale = 10;
+ shift = 8;
+ offset = -40;
+ } else if (chan == ADC_IBAT)
+ scale = 1000 * data->rg_resistor / data->real_resistor;
+ else
+ scale = 1000;
+
+ *val = ((be16_to_cpu(raws) >> shift) + offset) * scale;
+
+ return regmap_update_bits(regmap, RT9756_REG_ADCCTL, mask, 0);
+}
+
+static int rt9756_get_switching_state(struct rt9756_data *data, int *status)
+{
+ unsigned int switching_state;
+ int ret;
+
+ ret = regmap_field_read(data->rm_fields[F_SWITCHING], &switching_state);
+ if (ret)
+ return ret;
+
+ if (switching_state)
+ *status = POWER_SUPPLY_STATUS_CHARGING;
+ else
+ *status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+
+ return 0;
+}
+
+static int rt9756_get_charger_health(struct rt9756_data *data)
+{
+ struct charger_event *evt = &data->chg_evt;
+
+ if (evt->flag2 & RT9756_EVT_VBUSLOW_ERR)
+ return POWER_SUPPLY_HEALTH_UNDERVOLTAGE;
+
+ if (evt->flag1 & RT9756_EVT_BUSOVP || evt->flag2 & RT9756_EVT_BATOVP ||
+ evt->flag4 & RT9756_EVT_OUTOVP)
+ return POWER_SUPPLY_HEALTH_OVERVOLTAGE;
+
+ if (evt->flag1 & RT9756_EVT_BUSOCP || evt->flag2 & RT9756_EVT_BATOCP)
+ return POWER_SUPPLY_HEALTH_OVERCURRENT;
+
+ if (evt->flag1 & RT9756_EVT_BUSUCP)
+ return POWER_SUPPLY_HEALTH_UNSPEC_FAILURE;
+
+ if (evt->flag2 & RT9756_EVT_TDIEOTP)
+ return POWER_SUPPLY_HEALTH_OVERHEAT;
+
+ if (evt->flag3 & RT9756_EVT_WDT)
+ return POWER_SUPPLY_HEALTH_WATCHDOG_TIMER_EXPIRE;
+
+ return POWER_SUPPLY_HEALTH_GOOD;
+}
+
+static int rt9756_get_charger_online(struct rt9756_data *data, int *val)
+{
+ unsigned int online;
+ int ret;
+
+ ret = regmap_field_read(data->rm_fields[F_VBUS_STATE], &online);
+ if (ret)
+ return ret;
+
+ *val = !!online;
+ return 0;
+}
+
+static int rt9756_get_vbus_ovp(struct rt9756_data *data, int *val)
+{
+ unsigned int opmode;
+ int ovpval, ret;
+
+ /* operating mode -> 0 bypass, 1 div2 */
+ ret = regmap_field_read(data->rm_fields[F_OP_MODE], &opmode);
+ if (ret)
+ return ret;
+
+ ret = rt9756_get_value_field_range(data, F_VBUSOVP_EN, F_VBUSOVP, R_VBUSOVP, &ovpval);
+ if (ret)
+ return ret;
+
+ *val = opmode ? ovpval * 2 : ovpval;
+ return 0;
+}
+
+static int rt9756_set_vbus_ovp(struct rt9756_data *data, int val)
+{
+ unsigned int opmode;
+ int ret;
+
+ /* operating mode -> 0 bypass, 1 div2 */
+ ret = regmap_field_read(data->rm_fields[F_OP_MODE], &opmode);
+ if (ret)
+ return ret;
+
+ return rt9756_set_value_field_range(data, F_VBUSOVP_EN, F_VBUSOVP, R_VBUSOVP,
+ opmode ? val / 2 : val);
+}
+
+static const char * const rt9756_manufacturer = "Richtek Technology Corp.";
+static const char * const rt9756_model[MODEL_MAX] = { "RT9756", "RT9757", "RT9770" };
+
+static int rt9756_psy_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct rt9756_data *data = power_supply_get_drvdata(psy);
+ int *pval = &val->intval;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ return rt9756_get_switching_state(data, pval);
+ case POWER_SUPPLY_PROP_HEALTH:
+ *pval = rt9756_get_charger_health(data);
+ return 0;
+ case POWER_SUPPLY_PROP_ONLINE:
+ return rt9756_get_charger_online(data, pval);
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+ return rt9756_get_vbus_ovp(data, pval);
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ return rt9756_get_adc(data, ADC_VBUS, pval);
+ case POWER_SUPPLY_PROP_CURRENT_MAX:
+ return rt9756_get_value_field_range(data, F_IBUSOCP_EN, F_IBUSOCP, R_IBUSOCP, pval);
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ return rt9756_get_adc(data, ADC_IBUS, pval);
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+ return rt9756_get_value_field_range(data, F_VBATOVP_EN, F_VBATOVP, R_VBATOVP, pval);
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+ return rt9756_get_value_field_range(data, F_IBATOCP_EN, F_IBATOCP, R_IBATOCP, pval);
+ case POWER_SUPPLY_PROP_TEMP:
+ return rt9756_get_adc(data, ADC_TDIE, pval);
+ case POWER_SUPPLY_PROP_USB_TYPE:
+ *pval = atomic_read(&data->usb_type);
+ return 0;
+ case POWER_SUPPLY_PROP_MODEL_NAME:
+ val->strval = rt9756_model[data->model];
+ return 0;
+ case POWER_SUPPLY_PROP_MANUFACTURER:
+ val->strval = rt9756_manufacturer;
+ return 0;
+ default:
+ return -ENODATA;
+ }
+}
+
+static int rt9756_psy_set_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ const union power_supply_propval *val)
+{
+ struct rt9756_data *data = power_supply_get_drvdata(psy);
+ int intval = val->intval;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ memset(&data->chg_evt, 0, sizeof(data->chg_evt));
+ return regmap_field_write(data->rm_fields[F_CHG_EN], !!intval);
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+ return rt9756_set_vbus_ovp(data, intval);
+ case POWER_SUPPLY_PROP_CURRENT_MAX:
+ return rt9756_set_value_field_range(data, F_IBUSOCP_EN, F_IBUSOCP, R_IBUSOCP,
+ intval);
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+ return rt9756_set_value_field_range(data, F_VBATOVP_EN, F_VBATOVP, R_VBATOVP,
+ intval);
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+ return rt9756_set_value_field_range(data, F_IBATOCP_EN, F_IBATOCP, R_IBATOCP,
+ intval);
+ case POWER_SUPPLY_PROP_USB_TYPE:
+ return regmap_field_write(data->rm_fields[F_BC12_EN], !!intval);
+ default:
+ return -EINVAL;
+ }
+}
+
+static const enum power_supply_property rt9756_psy_properties[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_ONLINE,
+ POWER_SUPPLY_PROP_VOLTAGE_MAX,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_MAX,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX,
+ POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_USB_TYPE,
+ POWER_SUPPLY_PROP_MODEL_NAME,
+ POWER_SUPPLY_PROP_MANUFACTURER,
+};
+
+static int rt9756_psy_property_is_writeable(struct power_supply *psy,
+ enum power_supply_property psp)
+{
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ case POWER_SUPPLY_PROP_ONLINE:
+ case POWER_SUPPLY_PROP_VOLTAGE_MAX:
+ case POWER_SUPPLY_PROP_CURRENT_MAX:
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
+ case POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT_MAX:
+ case POWER_SUPPLY_PROP_USB_TYPE:
+ return 1;
+ default:
+ return 0;
+ }
+}
+
+static const unsigned int rt9756_wdt_millisecond[] = {
+ 500, 1000, 5000, 30000, 40000, 80000, 128000, 255000
+};
+
+static ssize_t watchdog_timer_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct power_supply *psy = to_power_supply(dev);
+ struct rt9756_data *data = power_supply_get_drvdata(psy);
+ unsigned int wdt_tmr_now = 0, wdt_sel, wdt_dis;
+ int ret;
+
+ ret = regmap_field_read(data->rm_fields[F_WDT_DIS], &wdt_dis);
+ if (ret)
+ return ret;
+
+ if (!wdt_dis) {
+ ret = regmap_field_read(data->rm_fields[F_WDT_TMR], &wdt_sel);
+ if (ret)
+ return ret;
+
+ wdt_tmr_now = rt9756_wdt_millisecond[wdt_sel];
+ }
+
+ return sysfs_emit(buf, "%d\n", wdt_tmr_now);
+}
+
+static ssize_t watchdog_timer_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct power_supply *psy = to_power_supply(dev);
+ struct rt9756_data *data = power_supply_get_drvdata(psy);
+ unsigned int wdt_set, wdt_sel;
+ int ret;
+
+ ret = kstrtouint(buf, 10, &wdt_set);
+ if (ret)
+ return ret;
+
+ ret = regmap_field_write(data->rm_fields[F_WDT_DIS], 1);
+ if (ret)
+ return ret;
+
+ wdt_sel = find_closest(wdt_set, rt9756_wdt_millisecond,
+ ARRAY_SIZE(rt9756_wdt_millisecond));
+
+ ret = regmap_field_write(data->rm_fields[F_WDT_TMR], wdt_sel);
+ if (ret)
+ return ret;
+
+ if (wdt_set) {
+ ret = regmap_field_write(data->rm_fields[F_WDT_DIS], 0);
+ if (ret)
+ return ret;
+ }
+
+ return count;
+}
+
+static ssize_t battery_voltage_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct power_supply *psy = to_power_supply(dev);
+ struct rt9756_data *data = power_supply_get_drvdata(psy);
+ int vbat_now, ret;
+
+ ret = rt9756_get_adc(data, ADC_VBAT, &vbat_now);
+ if (ret)
+ return ret;
+
+ return sysfs_emit(buf, "%d\n", vbat_now);
+}
+
+static ssize_t battery_current_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct power_supply *psy = to_power_supply(dev);
+ struct rt9756_data *data = power_supply_get_drvdata(psy);
+ int ibat_now, ret;
+
+ ret = rt9756_get_adc(data, ADC_IBAT, &ibat_now);
+ if (ret)
+ return ret;
+
+ return sysfs_emit(buf, "%d\n", ibat_now);
+}
+
+static const char * const rt9756_opmode_str[] = { "bypass", "div2" };
+
+static ssize_t operation_mode_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct power_supply *psy = to_power_supply(dev);
+ struct rt9756_data *data = power_supply_get_drvdata(psy);
+ unsigned int opmode;
+ int ret;
+
+ ret = regmap_field_read(data->rm_fields[F_OP_MODE], &opmode);
+ if (ret)
+ return ret;
+
+ return sysfs_emit(buf, "%s\n", rt9756_opmode_str[opmode]);
+}
+
+static ssize_t operation_mode_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct power_supply *psy = to_power_supply(dev);
+ struct rt9756_data *data = power_supply_get_drvdata(psy);
+ int index, ret;
+
+ index = sysfs_match_string(rt9756_opmode_str, buf);
+ if (index < 0)
+ return index;
+
+ ret = regmap_field_write(data->rm_fields[F_OP_MODE], index);
+
+ return ret ?: count;
+}
+
+static DEVICE_ATTR_RW(watchdog_timer);
+static DEVICE_ATTR_RO(battery_voltage);
+static DEVICE_ATTR_RO(battery_current);
+static DEVICE_ATTR_RW(operation_mode);
+
+static struct attribute *rt9756_sysfs_attrs[] = {
+ &dev_attr_watchdog_timer.attr,
+ &dev_attr_battery_voltage.attr,
+ &dev_attr_battery_current.attr,
+ &dev_attr_operation_mode.attr,
+ NULL
+};
+ATTRIBUTE_GROUPS(rt9756_sysfs);
+
+static int rt9756_register_psy(struct rt9756_data *data)
+{
+ struct power_supply_desc *desc = &data->psy_desc;
+ struct power_supply_config cfg = {};
+ struct device *dev = data->dev;
+ char *psy_name;
+
+ cfg.drv_data = data;
+ cfg.fwnode = dev_fwnode(dev);
+ cfg.attr_grp = rt9756_sysfs_groups;
+
+ psy_name = devm_kasprintf(dev, GFP_KERNEL, "rt9756-%s", dev_name(dev));
+ if (!psy_name)
+ return -ENOMEM;
+
+ desc->name = psy_name;
+ desc->type = POWER_SUPPLY_TYPE_USB;
+ desc->usb_types = BIT(POWER_SUPPLY_USB_TYPE_UNKNOWN) | BIT(POWER_SUPPLY_USB_TYPE_SDP) |
+ BIT(POWER_SUPPLY_USB_TYPE_DCP) | BIT(POWER_SUPPLY_USB_TYPE_CDP);
+ desc->properties = rt9756_psy_properties;
+ desc->num_properties = ARRAY_SIZE(rt9756_psy_properties);
+ desc->property_is_writeable = rt9756_psy_property_is_writeable;
+ desc->get_property = rt9756_psy_get_property;
+ desc->set_property = rt9756_psy_set_property;
+
+ data->psy = devm_power_supply_register(dev, desc, &cfg);
+
+ return PTR_ERR_OR_ZERO(data->psy);
+}
+
+static int rt9756_get_usb_type(struct rt9756_data *data)
+{
+ unsigned int type;
+ int report_type, ret;
+
+ ret = regmap_field_read(data->rm_fields[F_USB_STATE], &type);
+ if (ret)
+ return ret;
+
+ switch (type) {
+ case USB_SDP:
+ case USB_NSTD:
+ report_type = POWER_SUPPLY_USB_TYPE_SDP;
+ break;
+ case USB_DCP:
+ report_type = POWER_SUPPLY_USB_TYPE_DCP;
+ break;
+ case USB_CDP:
+ report_type = POWER_SUPPLY_USB_TYPE_CDP;
+ break;
+ case USB_NO_VBUS:
+ default:
+ report_type = POWER_SUPPLY_USB_TYPE_UNKNOWN;
+ break;
+ }
+
+ atomic_set(&data->usb_type, report_type);
+ return 0;
+}
+
+static irqreturn_t rt9756_irq_handler(int irq, void *devid)
+{
+ struct rt9756_data *data = devid;
+ struct regmap *regmap = data->regmap;
+ struct charger_event *evt = &data->chg_evt;
+ unsigned int bc12_flag = 0;
+ int ret;
+
+ ret = regmap_read(regmap, RT9756_REG_INTFLAG1, &evt->flag1);
+ if (ret)
+ return IRQ_NONE;
+
+ ret = regmap_read(regmap, RT9756_REG_INTFLAG2, &evt->flag2);
+ if (ret)
+ return IRQ_NONE;
+
+ ret = regmap_read(regmap, RT9756_REG_INTFLAG3, &evt->flag3);
+ if (ret)
+ return IRQ_NONE;
+
+ if (data->model != MODEL_RT9770) {
+ ret = regmap_read(regmap, RT9756_REG_INTFLAG4, &evt->flag4);
+ if (ret)
+ return IRQ_NONE;
+
+ ret = regmap_read(regmap, RT9756_REG_BC12FLAG, &bc12_flag);
+ if (ret)
+ return IRQ_NONE;
+ }
+
+ dev_dbg(data->dev, "events: 0x%02x,%02x,%02x,%02x,%02x\n", evt->flag1, evt->flag2,
+ evt->flag3, evt->flag4, bc12_flag);
+
+ if (evt->flag2 & RT9756_EVT_VAC_INSERT) {
+ ret = regmap_field_write(data->rm_fields[F_BC12_EN], 1);
+ if (ret)
+ return IRQ_NONE;
+ }
+
+ if (evt->flag3 & RT9756_EVT_VAC_UVLO)
+ atomic_set(&data->usb_type, POWER_SUPPLY_USB_TYPE_UNKNOWN);
+
+ if (bc12_flag & RT9756_EVT_BC12_DONE) {
+ ret = rt9756_get_usb_type(data);
+ if (ret)
+ return IRQ_NONE;
+ }
+
+ power_supply_changed(data->psy);
+
+ return IRQ_HANDLED;
+}
+
+static int rt9756_config_batsense_resistor(struct rt9756_data *data)
+{
+ unsigned int shunt_resistor_uohms = 2000, rsense_sel;
+
+ device_property_read_u32(data->dev, "shunt-resistor-micro-ohms", &shunt_resistor_uohms);
+
+ if (!shunt_resistor_uohms || shunt_resistor_uohms > 5000)
+ return -EINVAL;
+
+ data->real_resistor = shunt_resistor_uohms;
+
+ /* Always choose the larger or equal one to prevent false ocp alarm */
+ if (shunt_resistor_uohms <= 1000) {
+ rsense_sel = 0;
+ data->rg_resistor = 1000;
+ } else if (shunt_resistor_uohms <= 2000) {
+ rsense_sel = 1;
+ data->rg_resistor = 2000;
+ } else {
+ rsense_sel = 2;
+ data->rg_resistor = 5000;
+ }
+
+ return regmap_field_write(data->rm_fields[F_IBAT_RSEN], rsense_sel);
+}
+
+static const struct reg_sequence rt9756_init_regs[] = {
+ REG_SEQ(0x00, 0x80, 1000), /* REG_RESET */
+ REG_SEQ0(0x04, 0x13), /* VACOVP/OVPGATE 12V */
+ REG_SEQ0(0x00, 0x28), /* WDT_DIS = 1 */
+ REG_SEQ0(0x0c, 0x02), /* MASK FLAG1 */
+ REG_SEQ0(0x0e, 0x06), /* MASK FLAG2 */
+ REG_SEQ0(0x10, 0xca), /* MASK FLAG3 */
+ REG_SEQ0(0x44, 0xa0), /* BC12_EN */
+ REG_SEQ0(0x47, 0x07), /* MASK BC12FLAG */
+ REG_SEQ0(0x4a, 0xfe), /* MASK FLAG4 */
+ REG_SEQ0(0x5c, 0x40), /* MASK CON_SWITCHING */
+ REG_SEQ0(0x63, 0x01), /* MASK VDDA_UVLO */
+};
+
+static const struct reg_sequence rt9770_init_regs[] = {
+ REG_SEQ(0x00, 0x80, 1000), /* REG_RESET */
+ REG_SEQ0(0x04, 0x13), /* VACOVP/OVPGATE 12V */
+ REG_SEQ0(0x00, 0x28), /* WDT_DIS = 1 */
+ REG_SEQ0(0x0c, 0x02), /* MASK FLAG1 */
+ REG_SEQ0(0x0e, 0x06), /* MASK FLAG2 */
+ REG_SEQ0(0x10, 0xca), /* MASK FLAG3 */
+ REG_SEQ0(0x5c, 0x40), /* MASK CON_SWITCHING */
+ REG_SEQ0(0x63, 0x01), /* MASK VDDA_UVLO */
+};
+
+static const struct regmap_config rt9756_regmap_config = {
+ .name = "rt9756",
+ .reg_bits = 16,
+ .val_bits = 8,
+ .max_register = 0x1ff,
+};
+
+static const struct regmap_config rt9770_regmap_config = {
+ .name = "rt9770",
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = 0xff,
+};
+
+static int rt9756_check_device_model(struct rt9756_data *data)
+{
+ struct device *dev = data->dev;
+ unsigned int revid;
+ int ret;
+
+ ret = regmap_field_read(data->rm_fields[F_REVISION], &revid);
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to read revid\n");
+
+ if (revid == RT9757_REVID || revid == RT9757A_REVID)
+ data->model = MODEL_RT9757;
+ else if (revid == RT9756_REVID || revid == RT9756A_REVID)
+ data->model = MODEL_RT9756;
+ else
+ return dev_err_probe(dev, -EINVAL, "Unknown revision %d\n", revid);
+
+ return 0;
+}
+
+static int rt9770_check_device_model(struct rt9756_data *data)
+{
+ data->model = MODEL_RT9770;
+ return 0;
+}
+
+static int rt9756_probe(struct i2c_client *i2c)
+{
+ const struct rt975x_dev_data *dev_data;
+ struct device *dev = &i2c->dev;
+ struct rt9756_data *data;
+ struct regmap *regmap;
+ unsigned int devid;
+ int ret;
+
+ dev_data = device_get_match_data(dev);
+ if (!dev_data)
+ return dev_err_probe(dev, -EINVAL, "No device data found\n");
+
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (!data)
+ return -ENOMEM;
+
+ data->dev = dev;
+ mutex_init(&data->adc_lock);
+ atomic_set(&data->usb_type, POWER_SUPPLY_USB_TYPE_UNKNOWN);
+ i2c_set_clientdata(i2c, data);
+
+ regmap = devm_regmap_init_i2c(i2c, dev_data->regmap_config);
+ if (IS_ERR(regmap))
+ return dev_err_probe(dev, PTR_ERR(regmap), "Failed to init regmap\n");
+
+ data->regmap = regmap;
+
+ ret = devm_regmap_field_bulk_alloc(dev, regmap, data->rm_fields, dev_data->reg_fields,
+ F_MAX_FIELD);
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to alloc regmap fields\n");
+
+ /* Richtek Device ID check */
+ ret = regmap_field_read(data->rm_fields[F_DEV_ID], &devid);
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to read devid\n");
+
+ if (devid != RICHTEK_DEVID)
+ return dev_err_probe(dev, -ENODEV, "Incorrect VID 0x%02x\n", devid);
+
+ /* Get specific model */
+ ret = dev_data->check_device_model(data);
+ if (ret)
+ return ret;
+
+ ret = regmap_register_patch(regmap, dev_data->init_regs, dev_data->num_init_regs);
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to init registers\n");
+
+ ret = rt9756_config_batsense_resistor(data);
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to config batsense resistor\n");
+
+ ret = rt9756_register_psy(data);
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to init power supply\n");
+
+ return devm_request_threaded_irq(dev, i2c->irq, NULL, rt9756_irq_handler, IRQF_ONESHOT,
+ dev_name(dev), data);
+}
+
+static void rt9756_shutdown(struct i2c_client *i2c)
+{
+ struct rt9756_data *data = i2c_get_clientdata(i2c);
+
+ regmap_field_write(data->rm_fields[F_REG_RST], 1);
+}
+
+static const struct rt975x_dev_data rt9756_dev_data = {
+ .regmap_config = &rt9756_regmap_config,
+ .reg_fields = rt9756_chg_fields,
+ .init_regs = rt9756_init_regs,
+ .num_init_regs = ARRAY_SIZE(rt9756_init_regs),
+ .check_device_model = rt9756_check_device_model,
+};
+
+static const struct rt975x_dev_data rt9770_dev_data = {
+ .regmap_config = &rt9770_regmap_config,
+ .reg_fields = rt9770_chg_fields,
+ .init_regs = rt9770_init_regs,
+ .num_init_regs = ARRAY_SIZE(rt9770_init_regs),
+ .check_device_model = rt9770_check_device_model,
+};
+
+static const struct of_device_id rt9756_device_match_table[] = {
+ { .compatible = "richtek,rt9756", .data = &rt9756_dev_data },
+ { .compatible = "richtek,rt9770", .data = &rt9770_dev_data },
+ {}
+};
+MODULE_DEVICE_TABLE(of, rt9756_device_match_table);
+
+static struct i2c_driver rt9756_charger_driver = {
+ .driver = {
+ .name = "rt9756",
+ .of_match_table = rt9756_device_match_table,
+ },
+ .probe = rt9756_probe,
+ .shutdown = rt9756_shutdown,
+};
+module_i2c_driver(rt9756_charger_driver);
+
+MODULE_DESCRIPTION("Richtek RT9756 charger driver");
+MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>");
+MODULE_LICENSE("GPL");
--
2.34.1
^ permalink raw reply related [flat|nested] 5+ messages in thread