[PATCH 2/3] thermal: cpu_cooling: Check OPP for errors

[Viresh Kumar <viresh.kumar@linaro.org>]

It is possible for dev_pm_opp_find_freq_exact() to return errors. It was
all fine earlier as dev_pm_opp_get_voltage() had a check within it to
check for invalid OPPs, but dev_pm_opp_put() doesn't have any similar
checks and the callers need to make sure OPP is valid before calling
them.

Also update the later dev_warn_ratelimited() to not print the error
message as the OPP is guaranteed to be valid now.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
 drivers/thermal/cpu_cooling.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c
index 85fdbf762fa0..9534540434e2 100644
--- a/drivers/thermal/cpu_cooling.c
+++ b/drivers/thermal/cpu_cooling.c
@@ -431,13 +431,20 @@ static int get_static_power(struct cpufreq_cooling_device *cpufreq_device,
 
 	opp = dev_pm_opp_find_freq_exact(cpufreq_device->cpu_dev, freq_hz,
 					 true);
+	if (IS_ERR(opp)) {
+		dev_warn_ratelimited(cpufreq_device->cpu_dev,
+				     "Failed to find OPP for frequency %lu: %ld\n",
+				     freq_hz, PTR_ERR(opp));
+		return -EINVAL;
+	}
+
 	voltage = dev_pm_opp_get_voltage(opp);
 	dev_pm_opp_put(opp);
 
 	if (voltage == 0) {
 		dev_warn_ratelimited(cpufreq_device->cpu_dev,
-				     "Failed to get voltage for frequency %lu: %ld\n",
-				     freq_hz, IS_ERR(opp) ? PTR_ERR(opp) : 0);
+				     "Failed to get voltage for frequency %lu\n",
+				     freq_hz);
 		return -EINVAL;
 	}
 
-- 
2.7.1.410.g6faf27b