Re: [PATCH v12 1/4] dt-bindings: thermal-zones: Document critical-action

[Daniel Lezcano <daniel.lezcano@linaro.org>]

On 29/11/2023 13:43, Fabio Estevam wrote:
> From: Fabio Estevam <festevam@denx.de>
> 
> Document the critical-action property to describe the thermal action
> the OS should perform after the critical temperature is reached.
> 
> The possible values are "shutdown" and "reboot".
> 
> The motivation for introducing the critical-action property is that
> different systems may need different thermal actions when the critical
> temperature is reached.
> 
> For example, in a desktop PC, it is desired that a shutdown happens
> after the critical temperature is reached.
> 
> However, in some embedded cases, such behavior does not suit well,
> as the board may be unattended in the field and rebooting may be a
> better approach.
> 
> The bootloader may also benefit from this new property as it can check
> the SoC temperature and in case the temperature is above the critical
> point, it can trigger a shutdown or reboot accordingly.
> 
> Signed-off-by: Fabio Estevam <festevam@denx.de>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---

Rafael, ok for you if I pick this series ?


-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog