Re: [PATCH v3 5/5] arm64: dts: qcom: Add SDX75 platform and IDP board support

[Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>]

On 07/06/2023 13:47, Rohit Agarwal wrote:
> Add basic devicetree support for SDX75 platform and IDP board from
> Qualcomm. The SDX75 platform features an ARM Cortex A55 CPU which forms
> the Application Processor Sub System (APSS) along with standard Qualcomm
> peripherals like GCC, TLMM, UART, QPIC, and BAM etc... Also, there
> exists the networking parts such as IPA, MHI, PCIE-EP, EMAC, and Modem
> etc..
> 
> Signed-off-by: Rohit Agarwal <quic_rohiagar@quicinc.com>
> ---
>  arch/arm64/boot/dts/qcom/Makefile      |   1 +
>  arch/arm64/boot/dts/qcom/sdx75-idp.dts |  33 ++
>  arch/arm64/boot/dts/qcom/sdx75.dtsi    | 660 +++++++++++++++++++++++++++++++++
>  3 files changed, 694 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/qcom/sdx75-idp.dts
>  create mode 100644 arch/arm64/boot/dts/qcom/sdx75.dtsi
> 
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index d42c595..4fd5a18 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -173,6 +173,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-xiaomi-polaris.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-shift-axolotl.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sdm850-lenovo-yoga-c630.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sdm850-samsung-w737.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= sdx75-idp.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sm4250-oneplus-billie2.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sm6115p-lenovo-j606f.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= sm6125-sony-xperia-seine-pdx201.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sdx75-idp.dts b/arch/arm64/boot/dts/qcom/sdx75-idp.dts
> new file mode 100644
> index 0000000..cbe5cdf
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sdx75-idp.dts
> @@ -0,0 +1,33 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
> + */
> +
> +/dts-v1/;
> +
> +#include "sdx75.dtsi"
> +
> +/ {
> +	model = "Qualcomm Technologies, Inc. SDX75 IDP";
> +	compatible = "qcom,sdx75-idp", "qcom,sdx75";
> +
> +	aliases {
> +		serial0 = &uart1;
> +	};
> +};
> +
> +&chosen {
> +	stdout-path = "serial0:115200n8";
> +};
> +
> +&qupv3_id_0 {
> +	status = "okay";
> +};
> +
> +&tlmm {
> +	gpio-reserved-ranges = <110 6>;
> +};
> +
> +&uart1 {
> +	status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/qcom/sdx75.dtsi b/arch/arm64/boot/dts/qcom/sdx75.dtsi
> new file mode 100644
> index 0000000..40fa579
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sdx75.dtsi
> @@ -0,0 +1,660 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * SDX75 SoC device tree source
> + *
> + * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
> + *
> + */
> +
> +#include <dt-bindings/clock/qcom,rpmh.h>
> +#include <dt-bindings/clock/qcom,sdx75-gcc.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/soc/qcom,rpmh-rsc.h>
> +
> +/ {
> +	#address-cells = <2>;
> +	#size-cells = <2>;
> +	interrupt-parent = <&intc>;
> +
> +	chosen: chosen { };
> +
> +	clocks {
> +		xo_board: xo-board {
> +			compatible = "fixed-clock";
> +			clock-frequency = <76800000>;
> +			#clock-cells = <0>;
> +		};
> +
> +		sleep_clk: sleep-clk {
> +			compatible = "fixed-clock";
> +			clock-frequency = <32000>;
> +			#clock-cells = <0>;
> +		};
> +	};
> +
> +	cpus {
> +		#address-cells = <2>;
> +		#size-cells = <0>;
> +
> +		CPU0: cpu@0 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a55";
> +			reg = <0x0 0x0>;
> +			clocks = <&cpufreq_hw 0>;
> +			enable-method = "psci";
> +			power-domains = <&CPU_PD0>;
> +			power-domain-names = "psci";
> +			qcom,freq-domain = <&cpufreq_hw 0>;
> +			capacity-dmips-mhz = <1024>;
> +			dynamic-power-coefficient = <100>;
> +			next-level-cache = <&L2_0>;
> +
> +			L2_0: l2-cache {
> +				compatible = "cache";
> +				next-level-cache = <&L3_0>;

You miss properties like level and unified. Maybye you tested it with
some old (half year ago) dtschema?

It does not look like you tested the DTS against bindings. Please run
`make dtbs_check` (see
Documentation/devicetree/bindings/writing-schema.rst for instructions).

Best regards,
Krzysztof