From: Viresh Kumar <viresh.kumar@linaro.org>
To: rjw@sisk.pl
Cc: arvind.chauhan@arm.com, robin.randhawa@arm.com,
Steve.Bannister@arm.com, Liviu.Dudau@arm.com,
charles.garcia-tobin@arm.com, cpufreq@vger.kernel.org,
linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org,
linaro-kernel@lists.linaro.org, arnd.bergmann@linaro.org,
linux@arm.linux.org.uk, Viresh Kumar <viresh.kumar@linaro.org>
Subject: [PATCH 1/9] cpufreq: ARM: Arrange drivers in alphabetical order
Date: Mon, 25 Mar 2013 15:41:32 +0530 [thread overview]
Message-ID: <e7b8875eff197c3baef8dd474ff167f9a27ccdc6.1364205812.git.viresh.kumar@linaro.org> (raw)
In-Reply-To: <cover.1364205812.git.viresh.kumar@linaro.org>
In-Reply-To: <cover.1364205812.git.viresh.kumar@linaro.org>
Normally we keep drivers in alphabetical inside Kconfig and Makefile and over
time this was broken for ARM cpufreq drivers. Fix it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
---
drivers/cpufreq/Kconfig.arm | 116 ++++++++++++++++++++++----------------------
drivers/cpufreq/Makefile | 10 ++--
2 files changed, 63 insertions(+), 63 deletions(-)
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 030ddf6..b72a2b3 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -2,6 +2,64 @@
# ARM CPU Frequency scaling drivers
#
+config ARM_EXYNOS_CPUFREQ
+ bool "SAMSUNG EXYNOS SoCs"
+ depends on ARCH_EXYNOS
+ default y
+ help
+ This adds the CPUFreq driver common part for Samsung
+ EXYNOS SoCs.
+
+ If in doubt, say N.
+
+config ARM_EXYNOS4210_CPUFREQ
+ def_bool CPU_EXYNOS4210
+ help
+ This adds the CPUFreq driver for Samsung EXYNOS4210
+ SoC (S5PV310 or S5PC210).
+
+config ARM_EXYNOS4X12_CPUFREQ
+ def_bool (SOC_EXYNOS4212 || SOC_EXYNOS4412)
+ help
+ This adds the CPUFreq driver for Samsung EXYNOS4X12
+ SoC (EXYNOS4212 or EXYNOS4412).
+
+config ARM_EXYNOS5250_CPUFREQ
+ def_bool SOC_EXYNOS5250
+ help
+ This adds the CPUFreq driver for Samsung EXYNOS5250
+ SoC.
+
+config ARM_HIGHBANK_CPUFREQ
+ tristate "Calxeda Highbank-based"
+ depends on ARCH_HIGHBANK
+ select CPU_FREQ_TABLE
+ select GENERIC_CPUFREQ_CPU0
+ select PM_OPP
+ select REGULATOR
+
+ default m
+ help
+ This adds the CPUFreq driver for Calxeda Highbank SoC
+ based boards.
+
+ If in doubt, say N.
+
+config ARM_IMX6Q_CPUFREQ
+ tristate "Freescale i.MX6Q cpufreq support"
+ depends on SOC_IMX6Q
+ depends on REGULATOR_ANATOP
+ help
+ This adds cpufreq driver support for Freescale i.MX6Q SOC.
+
+ If in doubt, say N.
+
+config ARM_KIRKWOOD_CPUFREQ
+ def_bool ARCH_KIRKWOOD && OF
+ help
+ This adds the CPUFreq driver for Marvell Kirkwood
+ SoCs.
+
config ARM_OMAP2PLUS_CPUFREQ
bool "TI OMAP2+"
depends on ARCH_OMAP2PLUS
@@ -49,67 +107,9 @@ config ARM_S5PV210_CPUFREQ
If in doubt, say N.
-config ARM_EXYNOS_CPUFREQ
- bool "SAMSUNG EXYNOS SoCs"
- depends on ARCH_EXYNOS
- default y
- help
- This adds the CPUFreq driver common part for Samsung
- EXYNOS SoCs.
-
- If in doubt, say N.
-
-config ARM_EXYNOS4210_CPUFREQ
- def_bool CPU_EXYNOS4210
- help
- This adds the CPUFreq driver for Samsung EXYNOS4210
- SoC (S5PV310 or S5PC210).
-
-config ARM_EXYNOS4X12_CPUFREQ
- def_bool (SOC_EXYNOS4212 || SOC_EXYNOS4412)
- help
- This adds the CPUFreq driver for Samsung EXYNOS4X12
- SoC (EXYNOS4212 or EXYNOS4412).
-
-config ARM_EXYNOS5250_CPUFREQ
- def_bool SOC_EXYNOS5250
- help
- This adds the CPUFreq driver for Samsung EXYNOS5250
- SoC.
-
-config ARM_KIRKWOOD_CPUFREQ
- def_bool ARCH_KIRKWOOD && OF
- help
- This adds the CPUFreq driver for Marvell Kirkwood
- SoCs.
-
-config ARM_IMX6Q_CPUFREQ
- tristate "Freescale i.MX6Q cpufreq support"
- depends on SOC_IMX6Q
- depends on REGULATOR_ANATOP
- help
- This adds cpufreq driver support for Freescale i.MX6Q SOC.
-
- If in doubt, say N.
-
config ARM_SPEAR_CPUFREQ
bool "SPEAr CPUFreq support"
depends on PLAT_SPEAR
default y
help
This adds the CPUFreq driver support for SPEAr SOCs.
-
-config ARM_HIGHBANK_CPUFREQ
- tristate "Calxeda Highbank-based"
- depends on ARCH_HIGHBANK
- select CPU_FREQ_TABLE
- select GENERIC_CPUFREQ_CPU0
- select PM_OPP
- select REGULATOR
-
- default m
- help
- This adds the CPUFreq driver for Calxeda Highbank SoC
- based boards.
-
- If in doubt, say N.
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 863fd18..e33a30e 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -45,18 +45,18 @@ obj-$(CONFIG_X86_INTEL_PSTATE) += intel_pstate.o
##################################################################################
# ARM SoC drivers
obj-$(CONFIG_UX500_SOC_DB8500) += dbx500-cpufreq.o
-obj-$(CONFIG_ARM_S3C2416_CPUFREQ) += s3c2416-cpufreq.o
-obj-$(CONFIG_ARM_S3C64XX_CPUFREQ) += s3c64xx-cpufreq.o
-obj-$(CONFIG_ARM_S5PV210_CPUFREQ) += s5pv210-cpufreq.o
obj-$(CONFIG_ARM_EXYNOS_CPUFREQ) += exynos-cpufreq.o
obj-$(CONFIG_ARM_EXYNOS4210_CPUFREQ) += exynos4210-cpufreq.o
obj-$(CONFIG_ARM_EXYNOS4X12_CPUFREQ) += exynos4x12-cpufreq.o
obj-$(CONFIG_ARM_EXYNOS5250_CPUFREQ) += exynos5250-cpufreq.o
+obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ) += highbank-cpufreq.o
+obj-$(CONFIG_ARM_IMX6Q_CPUFREQ) += imx6q-cpufreq.o
obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ) += kirkwood-cpufreq.o
obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ) += omap-cpufreq.o
+obj-$(CONFIG_ARM_S3C2416_CPUFREQ) += s3c2416-cpufreq.o
+obj-$(CONFIG_ARM_S3C64XX_CPUFREQ) += s3c64xx-cpufreq.o
+obj-$(CONFIG_ARM_S5PV210_CPUFREQ) += s5pv210-cpufreq.o
obj-$(CONFIG_ARM_SPEAR_CPUFREQ) += spear-cpufreq.o
-obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ) += highbank-cpufreq.o
-obj-$(CONFIG_ARM_IMX6Q_CPUFREQ) += imx6q-cpufreq.o
##################################################################################
# PowerPC platform drivers
--
1.7.12.rc2.18.g61b472e
next prev parent reply other threads:[~2013-03-25 10:11 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-25 10:11 [PATCH 0/9] ARM: CPUFreq: Move drivers arch/arm/ -> drivers/cpufreq Viresh Kumar
2013-03-25 10:11 ` Viresh Kumar [this message]
2013-03-25 10:11 ` [PATCH 2/9] cpufreq: tegra: Move driver to drivers/cpufreq Viresh Kumar
2013-03-25 10:11 ` [PATCH 3/9] cpufreq: davinci: move cpufreq " Viresh Kumar
2013-03-27 10:17 ` Sekhar Nori
2013-03-27 10:21 ` Viresh Kumar
2013-03-27 10:32 ` Sekhar Nori
2013-03-27 10:37 ` Viresh Kumar
2013-03-27 10:56 ` Sekhar Nori
2013-03-25 10:11 ` [PATCH 4/9] cpufreq: imx: " Viresh Kumar
2013-03-27 15:22 ` Markus Pargmann
2013-03-27 15:23 ` Viresh Kumar
2013-03-25 10:11 ` [PATCH 5/9] cpufreq: integrator: " Viresh Kumar
2013-03-31 3:51 ` Viresh Kumar
2013-04-04 8:32 ` Viresh Kumar
2013-04-04 11:40 ` Linus Walleij
2013-03-25 10:11 ` [PATCH 6/9] cpufreq: pxa3xx: " Viresh Kumar
2013-03-31 3:52 ` Viresh Kumar
2013-03-31 5:24 ` Eric Miao
2013-03-31 6:45 ` Viresh Kumar
2013-03-31 11:34 ` Eric Miao
2013-03-25 10:11 ` [PATCH 7/9] cpufreq: pxa2xx: " Viresh Kumar
2013-03-25 10:11 ` [PATCH 8/9] cpufreq: s3c24xx: " Viresh Kumar
2013-03-31 3:53 ` Viresh Kumar
2013-04-03 9:27 ` Viresh Kumar
2013-03-25 10:11 ` [PATCH 9/9] cpufreq: sa11x0: " Viresh Kumar
2013-03-31 3:54 ` Viresh Kumar
2013-03-25 10:33 ` [PATCH 0/9] ARM: CPUFreq: Move drivers arch/arm/ -> drivers/cpufreq Viresh Kumar
2013-03-25 16:49 ` Stephen Warren
2013-04-04 9:38 ` Arnd Bergmann
2013-04-04 9:39 ` Viresh Kumar
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=e7b8875eff197c3baef8dd474ff167f9a27ccdc6.1364205812.git.viresh.kumar@linaro.org \
--to=viresh.kumar@linaro.org \
--cc=Liviu.Dudau@arm.com \
--cc=Steve.Bannister@arm.com \
--cc=arnd.bergmann@linaro.org \
--cc=arvind.chauhan@arm.com \
--cc=charles.garcia-tobin@arm.com \
--cc=cpufreq@vger.kernel.org \
--cc=linaro-kernel@lists.linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=linux@arm.linux.org.uk \
--cc=rjw@sisk.pl \
--cc=robin.randhawa@arm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).