From: Mario Limonciello <mario.limonciello@amd.com>
To: "Viktor Jägersküpper" <viktor_jaegerskuepper@freenet.de>,
"Huang Rui" <ray.huang@amd.com>
Cc: linux-pm@vger.kernel.org, regressions@lists.linux.dev
Subject: Re: [REGRESSION] CPU running at fixed frequency (~1.7 GHz) with kernel 7.1-rc1
Date: Wed, 29 Apr 2026 08:04:26 -0500 [thread overview]
Message-ID: <f35244cb-1f17-42a9-9479-5eee196cae5e@amd.com> (raw)
In-Reply-To: <14a87c99-785c-4b16-bfce-35ecbf053448@freenet.de>
On 4/29/26 07:34, Viktor Jägersküpper wrote:
> [You don't often get email from viktor_jaegerskuepper@freenet.de. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]
>
> Hi,
>
> when I boot my desktop system running with an AMD Ryzen 9 5900X using
> the kernel 7.1-rc1, all CPU cores seem to run at ~1.7 GHz constantly,
> i.e. I don't observe any core frequency boosting under load. This never
> happened with older kernel releases, e.g. with 7.0-rc7. I ran
> 'git bisect' and found this first bad commit:
>
> e30ca6dd5345c5b8ba05f346a8e81105352fe571 cpufreq/amd-pstate: Add dynamic energy performance preference
If you compile with CONFIG_X86_AMD_PSTATE_DYNAMIC_EPP=n (instead of
using kernel command line to turn it off) does the issue go away?
>
> I configured the amd-pstate driver as follows:
> CONFIG_X86_AMD_PSTATE=y
> CONFIG_X86_AMD_PSTATE_DEFAULT_MODE=3
> CONFIG_X86_AMD_PSTATE_DYNAMIC_EPP=y
> # CONFIG_X86_AMD_PSTATE_UT is not set
>
> Booting with "amd_dynamic_epp=disable" doesn't change anything, but as
> far as I can tell this new feature shouldn't affect my system at all.
> dmesg shows nothing about the amd-pstate driver (see below).
>
> Information about my system:
> AMD Ryzen 9 5900X (family: 0x19, model: 0x21, stepping: 0x2)
> AMD AGESA ComboV2 1.2.0.F (included in latest available BIOS)
> no overclocking/tuning
>
> Possibly related BIOS settings:
> Core Performance Boost - Auto
> SVM Mode - Enabled
> AMD Cool&Quiet function - Enabled
> PPC Adjustment - Pstate 0
> Global C-state Control - Auto
> Power Supply Idle Control - Auto
> CCD Control - Auto
> Downcore Control - Auto
> SMT Mode - Auto
> CPPC - Auto
> CPPC Preferred Cores - Auto
>
> Any ideas?
>
> Viktor
>
>
> #regzbot introduced: e30ca6dd5345c5b8ba05f346a8e81105352fe571
>
>
> [ 0.000000] Linux version 7.1.0-rc1 (viktor@einstein) (gcc (GCC) 15.2.1 20260209, GNU ld (GNU Binutils) 2.46) #1 SMP PREEMPT_DYNAMIC Mon Apr 27 17:38:55 CEST 2026
> [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux-upstream root=/dev/mapper/nvme0n1p3-encrypted rw rd.luks.name=f57b6e73-6f79-41f3-b733-266aa9695b49=nvme0n1p3-encrypted loglevel=3 mitigations=off zswap.enabled=0 modprobe.blacklist=radeon amd_dynamic_epp=disable
> [ 0.000000] BIOS-provided physical RAM map:
> [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] System RAM
> [ 0.000000] BIOS-e820: [mem 0x00000000000a0000-0x00000000000fffff] device reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x0000000009c3efff] System RAM
> [ 0.000000] BIOS-e820: [mem 0x0000000009c3f000-0x0000000009ffffff] device reserved
> [ 0.000000] BIOS-e820: [mem 0x000000000a000000-0x000000000a1fffff] System RAM
> [ 0.000000] BIOS-e820: [mem 0x000000000a200000-0x000000000a20dfff] ACPI NVS
> [ 0.000000] BIOS-e820: [mem 0x000000000a20e000-0x000000000affffff] System RAM
> [ 0.000000] BIOS-e820: [mem 0x000000000b000000-0x000000000b01ffff] device reserved
> [ 0.000000] BIOS-e820: [mem 0x000000000b020000-0x00000000b9d84fff] System RAM
> [ 0.000000] BIOS-e820: [mem 0x00000000b9d85000-0x00000000bc941fff] device reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000bc942000-0x00000000bc991fff] ACPI data
> [ 0.000000] BIOS-e820: [mem 0x00000000bc992000-0x00000000bd082fff] ACPI NVS
> [ 0.000000] BIOS-e820: [mem 0x00000000bd083000-0x00000000bddfefff] device reserved
> [ 0.000000] BIOS-e820: [mem 0x00000000bddff000-0x00000000beffffff] System RAM
> [ 0.000000] BIOS-e820: [mem 0x00000000bf000000-0x00000000bfffffff] device reserved
> [ 0.000000] BIOS-e820: [gap 0x00000000c0000000-0x00000000efffffff]
> [ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f7ffffff] device reserved
> [ 0.000000] BIOS-e820: [gap 0x00000000f8000000-0x00000000fd1fffff]
> [ 0.000000] BIOS-e820: [mem 0x00000000fd200000-0x00000000fd2fffff] device reserved
> [ 0.000000] BIOS-e820: [gap 0x00000000fd300000-0x00000000fd5fffff]
> [ 0.000000] BIOS-e820: [mem 0x00000000fd600000-0x00000000fd7fffff] device reserved
> [ 0.000000] BIOS-e820: [gap 0x00000000fd800000-0x00000000fe9fffff]
> [ 0.000000] BIOS-e820: [mem 0x00000000fea00000-0x00000000fea0ffff] device reserved
> [ 0.000000] BIOS-e820: [gap 0x00000000fea10000-0x00000000feb7ffff]
> [ 0.000000] BIOS-e820: [mem 0x00000000feb80000-0x00000000fec01fff] device reserved
> [ 0.000000] BIOS-e820: [gap 0x00000000fec02000-0x00000000fec0ffff]
> [ 0.000000] BIOS-e820: [mem 0x00000000fec10000-0x00000000fec10fff] device reserved
> [ 0.000000] BIOS-e820: [gap 0x00000000fec11000-0x00000000fec2ffff]
> [ 0.000000] BIOS-e820: [mem 0x00000000fec30000-0x00000000fec30fff] device reserved
> [ 0.000000] BIOS-e820: [gap 0x00000000fec31000-0x00000000fecfffff]
> [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed00fff] device reserved
> [ 0.000000] BIOS-e820: [gap 0x00000000fed01000-0x00000000fed3ffff]
> [ 0.000000] BIOS-e820: [mem 0x00000000fed40000-0x00000000fed44fff] device reserved
> [ 0.000000] BIOS-e820: [gap 0x00000000fed45000-0x00000000fed7ffff]
> [ 0.000000] BIOS-e820: [mem 0x00000000fed80000-0x00000000fed8ffff] device reserved
> [ 0.000000] BIOS-e820: [gap 0x00000000fed90000-0x00000000fedc1fff]
> [ 0.000000] BIOS-e820: [mem 0x00000000fedc2000-0x00000000fedcffff] device reserved
> [ 0.000000] BIOS-e820: [gap 0x00000000fedd0000-0x00000000fedd3fff]
> [ 0.000000] BIOS-e820: [mem 0x00000000fedd4000-0x00000000fedd5fff] device reserved
> [ 0.000000] BIOS-e820: [gap 0x00000000fedd6000-0x00000000feffffff]
> [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] device reserved
> [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000103f2fffff] System RAM
> [ 0.000000] BIOS-e820: [mem 0x000000103f300000-0x000000103fffffff] device reserved
> [ 0.000000] NX (Execute Disable) protection: active
> [ 0.000000] APIC: Static calls initialized
> [ 0.000000] efi: EFI v2.7 by American Megatrends
> [ 0.000000] efi: ACPI=0xbd06c000 ACPI 2.0=0xbd06c014 TPMFinalLog=0xbd036000 SMBIOS=0xbdbf3000 SMBIOS 3.0=0xbdbf2000 MEMATTR=0xb5bcd018 ESRT=0xb8079698 INITRD=0xb566be98 RNG=0xbc974018 TPMEventLog=0xbc972018
> [ 0.000000] random: crng init done
> [ 0.000000] efi: Remove mem309: MMIO range=[0xf0000000-0xf7ffffff] (128MB) from e820 map
> [ 0.000000] e820: remove [mem 0xf0000000-0xf7ffffff] device reserved
> [ 0.000000] efi: Remove mem310: MMIO range=[0xfd200000-0xfd2fffff] (1MB) from e820 map
> [ 0.000000] e820: remove [mem 0xfd200000-0xfd2fffff] device reserved
> [ 0.000000] efi: Remove mem311: MMIO range=[0xfd600000-0xfd7fffff] (2MB) from e820 map
> [ 0.000000] e820: remove [mem 0xfd600000-0xfd7fffff] device reserved
> [ 0.000000] efi: Not removing mem312: MMIO range=[0xfea00000-0xfea0ffff] (64KB) from e820 map
> [ 0.000000] efi: Remove mem313: MMIO range=[0xfeb80000-0xfec01fff] (0MB) from e820 map
> [ 0.000000] e820: remove [mem 0xfeb80000-0xfec01fff] device reserved
> [ 0.000000] efi: Not removing mem314: MMIO range=[0xfec10000-0xfec10fff] (4KB) from e820 map
> [ 0.000000] efi: Not removing mem315: MMIO range=[0xfec30000-0xfec30fff] (4KB) from e820 map
> [ 0.000000] efi: Not removing mem316: MMIO range=[0xfed00000-0xfed00fff] (4KB) from e820 map
> [ 0.000000] efi: Not removing mem317: MMIO range=[0xfed40000-0xfed44fff] (20KB) from e820 map
> [ 0.000000] efi: Not removing mem318: MMIO range=[0xfed80000-0xfed8ffff] (64KB) from e820 map
> [ 0.000000] efi: Not removing mem319: MMIO range=[0xfedc2000-0xfedcffff] (56KB) from e820 map
> [ 0.000000] efi: Not removing mem320: MMIO range=[0xfedd4000-0xfedd5fff] (8KB) from e820 map
> [ 0.000000] efi: Remove mem321: MMIO range=[0xff000000-0xffffffff] (16MB) from e820 map
> [ 0.000000] e820: remove [mem 0xff000000-0xffffffff] device reserved
> [ 0.000000] DMI: SMBIOS 3.3.0 present.
> [ 0.000000] DMI: Gigabyte Technology Co., Ltd. B550 AORUS MASTER/B550 AORUS MASTER, BIOS F18 10/28/2025
> [ 0.000000] DMI: Memory slots populated: 2/4
> [ 0.000000] tsc: Fast TSC calibration using PIT
> [ 0.000000] tsc: Detected 3693.076 MHz processor
> [ 0.000384] e820: update [mem 0x00000000-0x00000fff] System RAM ==> device reserved
> [ 0.000385] e820: remove [mem 0x000a0000-0x000fffff] System RAM
> [ 0.000390] last_pfn = 0x103f300 max_arch_pfn = 0x400000000
> [ 0.000395] total RAM covered: 3071M
> [ 0.000473] Found optimal setting for mtrr clean up
> [ 0.000473] gran_size: 64K chunk_size: 64M num_reg: 3 lose cover RAM: 0G
> [ 0.000475] MTRR map: 7 entries (3 fixed + 4 variable; max 20), built from 9 variable MTRRs
> [ 0.000477] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
> [ 0.000639] e820: update [mem 0xbcb00000-0xbcb0ffff] System RAM ==> device reserved
> [ 0.000643] e820: update [mem 0xc0000000-0xffffffff] System RAM ==> device reserved
> [ 0.000645] last_pfn = 0xbf000 max_arch_pfn = 0x400000000
> [ 0.003181] esrt: Reserving ESRT space from 0x00000000b8079698 to 0x00000000b80796d0.
> [ 0.003189] e820: update [mem 0xb8079000-0xb8079fff] System RAM ==> device reserved
> [ 0.003214] Using GB pages for direct mapping
> [ 0.003377] Secure boot disabled
> [ 0.003377] RAMDISK: [mem 0xaf770000-0xb03c1fff]
> [ 0.003391] ACPI: Early table checksum verification disabled
> [ 0.003393] ACPI: RSDP 0x00000000BD06C014 000024 (v02 ALASKA)
> [ 0.003396] ACPI: XSDT 0x00000000BD06B728 0000E4 (v01 ALASKA A M I 01072009 AMI 01000013)
> [ 0.003399] ACPI: FACP 0x00000000BC978000 000114 (v06 ALASKA A M I 01072009 AMI 00010013)
> [ 0.003402] ACPI: DSDT 0x00000000BC94F000 00684A (v02 ALASKA A M I 01072009 INTL 20190509)
> [ 0.003404] ACPI: FACS 0x00000000BD066000 000040
> [ 0.003405] ACPI: SSDT 0x00000000BC987000 00AD59 (v02 GBT GSWApp 00000001 INTL 20190509)
> [ 0.003406] ACPI: SSDT 0x00000000BC97E000 008CE9 (v02 AMD AmdTable 00000002 MSFT 04000000)
> [ 0.003408] ACPI: SSDT 0x00000000BC97A000 003D7C (v02 AMD AMD AOD 00000001 INTL 20190509)
> [ 0.003409] ACPI: SSDT 0x00000000BC979000 000309 (v02 ALASKA CPUSSDT 01072009 AMI 01072009)
> [ 0.003410] ACPI: FIDT 0x00000000BC971000 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
> [ 0.003411] ACPI: MCFG 0x00000000BC970000 00003C (v01 ALASKA A M I 01072009 MSFT 00010013)
> [ 0.003413] ACPI: HPET 0x00000000BC96F000 000038 (v01 ALASKA A M I 01072009 AMI 00000005)
> [ 0.003414] ACPI: IVRS 0x00000000BC96E000 0001A4 (v02 AMD AmdTable 00000001 AMD 00000001)
> [ 0.003415] ACPI: FPDT 0x00000000BC96D000 000044 (v01 ALASKA A M I 01072009 AMI 01000013)
> [ 0.003416] ACPI: BGRT 0x00000000BC96C000 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
> [ 0.003417] ACPI: TPM2 0x00000000BC96B000 00004C (v04 ALASKA A M I 00000001 AMI 00000000)
> [ 0.003419] ACPI: PCCT 0x00000000BC96A000 00006E (v02 AMD AmdTable 00000001 AMD 00000001)
> [ 0.003420] ACPI: SSDT 0x00000000BC963000 0061A3 (v02 AMD AmdTable 00000001 AMD 00000001)
> [ 0.003421] ACPI: CRAT 0x00000000BC961000 001190 (v01 AMD AmdTable 00000001 AMD 00000001)
> [ 0.003423] ACPI: CDIT 0x00000000BC960000 000029 (v01 AMD AmdTable 00000001 AMD 00000001)
> [ 0.003424] ACPI: SSDT 0x00000000BC95F000 000625 (v02 AMD ArticDGP 00000001 INTL 20190509)
> [ 0.003425] ACPI: SSDT 0x00000000BC95D000 001512 (v02 AMD ArticTPX 00000001 INTL 20190509)
> [ 0.003426] ACPI: SSDT 0x00000000BC95C000 000788 (v02 AMD ArticNOI 00000001 INTL 20190509)
> [ 0.003427] ACPI: SSDT 0x00000000BC958000 003A23 (v02 AMD ArticN 00000001 INTL 20190509)
> [ 0.003429] ACPI: WSMT 0x00000000BC957000 000028 (v01 ALASKA A M I 01072009 AMI 00010013)
> [ 0.003430] ACPI: APIC 0x00000000BC956000 00015E (v04 ALASKA A M I 01072009 AMI 00010013)
> [ 0.003431] ACPI: SSDT 0x00000000BC976000 00147F (v02 AMD ArticC 00000001 INTL 20190509)
> [ 0.003432] ACPI: SSDT 0x00000000BC975000 0000BF (v01 AMD AmdTable 00001000 INTL 20190509)
> [ 0.003433] ACPI: Reserving FACP table memory at [mem 0xbc978000-0xbc978113]
> [ 0.003434] ACPI: Reserving DSDT table memory at [mem 0xbc94f000-0xbc955849]
> [ 0.003435] ACPI: Reserving FACS table memory at [mem 0xbd066000-0xbd06603f]
> [ 0.003435] ACPI: Reserving SSDT table memory at [mem 0xbc987000-0xbc991d58]
> [ 0.003435] ACPI: Reserving SSDT table memory at [mem 0xbc97e000-0xbc986ce8]
> [ 0.003436] ACPI: Reserving SSDT table memory at [mem 0xbc97a000-0xbc97dd7b]
> [ 0.003436] ACPI: Reserving SSDT table memory at [mem 0xbc979000-0xbc979308]
> [ 0.003436] ACPI: Reserving FIDT table memory at [mem 0xbc971000-0xbc97109b]
> [ 0.003437] ACPI: Reserving MCFG table memory at [mem 0xbc970000-0xbc97003b]
> [ 0.003437] ACPI: Reserving HPET table memory at [mem 0xbc96f000-0xbc96f037]
> [ 0.003437] ACPI: Reserving IVRS table memory at [mem 0xbc96e000-0xbc96e1a3]
> [ 0.003438] ACPI: Reserving FPDT table memory at [mem 0xbc96d000-0xbc96d043]
> [ 0.003438] ACPI: Reserving BGRT table memory at [mem 0xbc96c000-0xbc96c037]
> [ 0.003438] ACPI: Reserving TPM2 table memory at [mem 0xbc96b000-0xbc96b04b]
> [ 0.003439] ACPI: Reserving PCCT table memory at [mem 0xbc96a000-0xbc96a06d]
> [ 0.003439] ACPI: Reserving SSDT table memory at [mem 0xbc963000-0xbc9691a2]
> [ 0.003439] ACPI: Reserving CRAT table memory at [mem 0xbc961000-0xbc96218f]
> [ 0.003440] ACPI: Reserving CDIT table memory at [mem 0xbc960000-0xbc960028]
> [ 0.003440] ACPI: Reserving SSDT table memory at [mem 0xbc95f000-0xbc95f624]
> [ 0.003440] ACPI: Reserving SSDT table memory at [mem 0xbc95d000-0xbc95e511]
> [ 0.003441] ACPI: Reserving SSDT table memory at [mem 0xbc95c000-0xbc95c787]
> [ 0.003441] ACPI: Reserving SSDT table memory at [mem 0xbc958000-0xbc95ba22]
> [ 0.003441] ACPI: Reserving WSMT table memory at [mem 0xbc957000-0xbc957027]
> [ 0.003442] ACPI: Reserving APIC table memory at [mem 0xbc956000-0xbc95615d]
> [ 0.003442] ACPI: Reserving SSDT table memory at [mem 0xbc976000-0xbc97747e]
> [ 0.003443] ACPI: Reserving SSDT table memory at [mem 0xbc975000-0xbc9750be]
> [ 0.003490] No NUMA configuration found
> [ 0.003490] Faking a node at [mem 0x0000000000000000-0x000000103f2fffff]
> [ 0.003494] NODE_DATA(0) allocated [mem 0x103f2d4f80-0x103f2fffff]
> [ 0.003972] ACPI: PM-Timer IO Port: 0x808
> [ 0.003977] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
> [ 0.003987] IOAPIC[0]: apic_id 25, version 33, address 0xfec00000, GSI 0-23
> [ 0.003992] IOAPIC[1]: apic_id 26, version 33, address 0xfec01000, GSI 24-55
> [ 0.003993] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> [ 0.003994] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
> [ 0.003996] ACPI: Using ACPI (MADT) for SMP configuration information
> [ 0.003997] ACPI: HPET id: 0x10228201 base: 0xfed00000
> [ 0.004003] e820: update [mem 0xb5b76000-0xb5bccfff] System RAM ==> device reserved
> [ 0.004010] CPU topo: Max. logical packages: 1
> [ 0.004010] CPU topo: Max. logical nodes: 1
> [ 0.004011] CPU topo: Num. nodes per package: 1
> [ 0.004012] CPU topo: Max. logical dies: 1
> [ 0.004012] CPU topo: Max. dies per package: 1
> [ 0.004014] CPU topo: Max. threads per core: 2
> [ 0.004014] CPU topo: Num. cores per package: 12
> [ 0.004015] CPU topo: Num. threads per package: 24
> [ 0.004015] CPU topo: Allowing 24 present CPUs plus 0 hotplug CPUs
> [ 0.004028] PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
> [ 0.004029] PM: hibernation: Registered nosave memory: [mem 0x000a0000-0x000fffff]
> [ 0.004030] PM: hibernation: Registered nosave memory: [mem 0x09c3f000-0x09ffffff]
> [ 0.004031] PM: hibernation: Registered nosave memory: [mem 0x0a200000-0x0a20dfff]
> [ 0.004032] PM: hibernation: Registered nosave memory: [mem 0x0b000000-0x0b01ffff]
> [ 0.004032] PM: hibernation: Registered nosave memory: [mem 0xb5b76000-0xb5bccfff]
> [ 0.004033] PM: hibernation: Registered nosave memory: [mem 0xb8079000-0xb8079fff]
> [ 0.004034] PM: hibernation: Registered nosave memory: [mem 0xb9d85000-0xbddfefff]
> [ 0.004035] PM: hibernation: Registered nosave memory: [mem 0xbf000000-0xffffffff]
> [ 0.004036] [gap 0xc0000000-0xfe9fffff] available for PCI devices
> [ 0.004037] Booting paravirtualized kernel on bare hardware
> [ 0.004038] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
> [ 0.007489] Zone ranges:
> [ 0.007490] DMA [mem 0x0000000000001000-0x0000000000ffffff]
> [ 0.007491] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
> [ 0.007491] Normal [mem 0x0000000100000000-0x000000103f2fffff]
> [ 0.007492] Device empty
> [ 0.007493] Movable zone start for each node
> [ 0.007493] Early memory node ranges
> [ 0.007494] node 0: [mem 0x0000000000001000-0x000000000009ffff]
> [ 0.007494] node 0: [mem 0x0000000000100000-0x0000000009c3efff]
> [ 0.007495] node 0: [mem 0x000000000a000000-0x000000000a1fffff]
> [ 0.007495] node 0: [mem 0x000000000a20e000-0x000000000affffff]
> [ 0.007495] node 0: [mem 0x000000000b020000-0x00000000b9d84fff]
> [ 0.007496] node 0: [mem 0x00000000bddff000-0x00000000beffffff]
> [ 0.007496] node 0: [mem 0x0000000100000000-0x000000103f2fffff]
> [ 0.007499] Initmem setup node 0 [mem 0x0000000000001000-0x000000103f2fffff]
> [ 0.007503] On node 0, zone DMA: 1 pages in unavailable ranges
> [ 0.007513] On node 0, zone DMA: 96 pages in unavailable ranges
> [ 0.007589] On node 0, zone DMA32: 961 pages in unavailable ranges
> [ 0.007598] On node 0, zone DMA32: 14 pages in unavailable ranges
> [ 0.009410] On node 0, zone DMA32: 32 pages in unavailable ranges
> [ 0.009492] On node 0, zone DMA32: 16506 pages in unavailable ranges
> [ 0.065366] On node 0, zone Normal: 4096 pages in unavailable ranges
> [ 0.065380] On node 0, zone Normal: 3328 pages in unavailable ranges
> [ 0.065387] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:24 nr_cpu_ids:24 nr_node_ids:1
> [ 0.065831] percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u262144
> [ 0.065837] pcpu-alloc: s221184 r8192 d28672 u262144 alloc=1*2097152
> [ 0.065839] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
> [ 0.065842] pcpu-alloc: [0] 16 17 18 19 20 21 22 23
> [ 0.065854] Kernel command line: BOOT_IMAGE=/vmlinuz-linux-upstream root=/dev/mapper/nvme0n1p3-encrypted rw rd.luks.name=f57b6e73-6f79-41f3-b733-266aa9695b49=nvme0n1p3-encrypted loglevel=3 mitigations=off zswap.enabled=0 modprobe.blacklist=radeon amd_dynamic_epp=disable
> [ 0.065922] printk: log_buf_len individual max cpu contribution: 4096 bytes
> [ 0.065922] printk: log_buf_len total cpu_extra contributions: 94208 bytes
> [ 0.065923] printk: log_buf_len min size: 131072 bytes
> [ 0.066031] printk: log buffer data + meta data: 262144 + 917504 = 1179648 bytes
> [ 0.066032] printk: early log buf free: 115336(87%)
> [ 0.069616] Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, linear)
> [ 0.071427] Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
> [ 0.071545] software IO TLB: area num 32.
> [ 0.078734] Fallback order for Node 0: 0
> [ 0.078738] Built 1 zonelists, mobility grouping on. Total pages: 16752182
> [ 0.078739] Policy zone: Normal
> [ 0.078875] mem auto-init: stack:all(zero), heap alloc:on, heap free:off
> [ 0.148681] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=24, Nodes=1
> [ 0.157058] ftrace: allocating 56496 entries in 224 pages
> [ 0.157059] ftrace: allocated 224 pages with 3 groups
> [ 0.157145] Dynamic Preempt: full
> [ 0.157213] rcu: Preemptible hierarchical RCU implementation.
> [ 0.157213] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=24.
> [ 0.157214] rcu: RCU priority boosting: priority 1 delay 500 ms.
> [ 0.157215] Trampoline variant of Tasks RCU enabled.
> [ 0.157215] Rude variant of Tasks RCU enabled.
> [ 0.157215] Tracing variant of Tasks RCU enabled.
> [ 0.157216] rcu: RCU calculated value of scheduler-enlistment delay is 100 jiffies.
> [ 0.157216] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=24
> [ 0.157226] RCU Tasks: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=24.
> [ 0.157228] RCU Tasks Rude: Setting shift to 5 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=24.
> [ 0.160206] NR_IRQS: 524544, nr_irqs: 1160, preallocated irqs: 16
> [ 0.160387] rcu: srcu_init: Setting srcu_struct sizes based on contention.
> [ 0.160488] kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
> [ 0.160526] Console: colour dummy device 80x25
> [ 0.160528] printk: legacy console [tty0] enabled
> [ 0.160563] ACPI: Core revision 20251212
> [ 0.160667] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484873504 ns
> [ 0.160684] APIC: Switch to symmetric I/O mode setup
> [ 0.160978] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR0, rdevid:0xa0
> [ 0.160979] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR1, rdevid:0xa0
> [ 0.160980] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR2, rdevid:0xa0
> [ 0.160981] AMD-Vi: ivrs, add hid:AMDI0020, uid:\_SB.FUR3, rdevid:0xa0
> [ 0.160981] AMD-Vi: Using global IVHD EFR:0x0, EFR2:0x0
> [ 0.478446] x2apic: IRQ remapping doesn't support X2APIC mode
> [ 0.479080] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
> [ 0.483681] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x6a7792bdeec, max_idle_ns: 881590891415 ns
> [ 0.483684] Calibrating delay loop (skipped), value calculated using timer frequency.. 7386.15 BogoMIPS (lpj=3693076)
> [ 0.483697] x86/cpu: User Mode Instruction Prevention (UMIP) activated
> [ 0.483726] LVT offset 1 assigned for vector 0xf9
> [ 0.483727] LVT offset 2 assigned for vector 0xf4
> [ 0.483905] Last level iTLB entries: 4KB 512, 2MB 512, 4MB 256
> [ 0.483906] Last level dTLB entries: 4KB 2048, 2MB 2048, 4MB 1024, 1GB 0
> [ 0.483910] process: using mwait in idle threads
> [ 0.483911] mitigations: Enabled attack vectors: SMT mitigations: off
> [ 0.483913] Speculative Store Bypass: Vulnerable
> [ 0.483913] Spectre V2 : Vulnerable
> [ 0.483914] Spectre V2 : User space: Vulnerable
> [ 0.483915] Speculative Return Stack Overflow: Vulnerable
> [ 0.483915] VMSCAPE: Vulnerable
> [ 0.483916] Spectre V1 : Vulnerable: __user pointer sanitization and usercopy barriers only; no swapgs barriers
> [ 0.483920] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
> [ 0.483921] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
> [ 0.483921] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
> [ 0.483922] x86/fpu: Supporting XSAVE feature 0x200: 'Protection Keys User registers'
> [ 0.483922] x86/fpu: Supporting XSAVE feature 0x800: 'Control-flow User registers'
> [ 0.483923] x86/fpu: Supporting XSAVE feature 0x1000: 'Control-flow Kernel registers (KVM only)'
> [ 0.483924] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
> [ 0.483924] x86/fpu: xstate_offset[9]: 832, xstate_sizes[9]: 8
> [ 0.483925] x86/fpu: xstate_offset[11]: 840, xstate_sizes[11]: 16
> [ 0.483926] x86/fpu: xstate_offset[12]: 856, xstate_sizes[12]: 24
> [ 0.483926] x86/fpu: Enabled xstate features 0x1a07, context size is 880 bytes, using 'compacted' format.
> [ 0.503034] pid_max: default: 32768 minimum: 301
> [ 0.503129] landlock: Up and running.
> [ 0.503131] Yama: becoming mindful.
> [ 0.503264] LSM support for eBPF active
> [ 0.503343] Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
> [ 0.503400] Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
> [ 0.503451] VFS: Finished mounting rootfs on nullfs
> [ 0.605788] smpboot: CPU0: AMD Ryzen 9 5900X 12-Core Processor (family: 0x19, model: 0x21, stepping: 0x2)
> [ 0.605899] Performance Events: Fam17h+ core perfctr, AMD PMU driver.
> [ 0.605902] ... version: 0
> [ 0.605902] ... bit width: 48
> [ 0.605903] ... generic counters: 6
> [ 0.605903] ... generic bitmap: 000000000000003f
> [ 0.605904] ... fixed-purpose counters: 0
> [ 0.605904] ... fixed-purpose bitmap: 0000000000000000
> [ 0.605904] ... value mask: 0000ffffffffffff
> [ 0.605905] ... max period: 00007fffffffffff
> [ 0.605905] ... global_ctrl mask: 000000000000003f
> [ 0.605967] signal: max sigframe size: 3376
> [ 0.605984] rcu: Hierarchical SRCU implementation.
> [ 0.605985] rcu: Max phase no-delay instances is 400.
> [ 0.606013] Timer migration: 2 hierarchy levels; 8 children per group; 2 crossnode level
> [ 0.606170] MCE: In-kernel MCE decoding enabled.
> [ 0.606193] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
> [ 0.606283] smp: Bringing up secondary CPUs ...
> [ 0.606329] smpboot: x86: Booting SMP configuration:
> [ 0.606330] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15 #16 #17 #18 #19 #20 #21 #22 #23
> [ 0.633712] smp: Brought up 1 node, 24 CPUs
> [ 0.633712] smpboot: Total of 24 processors activated (177267.64 BogoMIPS)
> [ 0.635745] Memory: 65597208K/67008728K available (20069K kernel code, 2878K rwdata, 16092K rodata, 4788K init, 4820K bss, 1379168K reserved, 0K cma-reserved)
> [ 0.636165] devtmpfs: initialized
> [ 0.636165] x86/mm: Memory block size: 2048MB
> [ 0.636791] ACPI: PM: Registering ACPI NVS region [mem 0x0a200000-0x0a20dfff] (57344 bytes)
> [ 0.636791] ACPI: PM: Registering ACPI NVS region [mem 0xbc992000-0xbd082fff] (7278592 bytes)
> [ 0.636791] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
> [ 0.636791] posixtimers hash table entries: 16384 (order: 6, 262144 bytes, linear)
> [ 0.636791] futex hash table entries: 8192 (524288 bytes on 1 NUMA nodes, total 512 KiB, linear).
> [ 0.636793] xor: automatically using best checksumming function avx
> [ 0.636889] PM: RTC time: 10:27:47, date: 2026-04-29
> [ 0.637177] NET: Registered PF_NETLINK/PF_ROUTE protocol family
> [ 0.637386] DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
> [ 0.637767] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
> [ 0.637908] DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
> [ 0.637911] audit: initializing netlink subsys (disabled)
> [ 0.637915] audit: type=2000 audit(1777458467.161:1): state=initialized audit_enabled=0 res=1
> [ 0.637915] thermal_sys: Registered thermal governor 'fair_share'
> [ 0.637915] thermal_sys: Registered thermal governor 'bang_bang'
> [ 0.637915] thermal_sys: Registered thermal governor 'step_wise'
> [ 0.637915] thermal_sys: Registered thermal governor 'user_space'
> [ 0.637915] thermal_sys: Registered thermal governor 'power_allocator'
> [ 0.637915] cpuidle: using governor ladder
> [ 0.637915] cpuidle: using governor menu
> [ 0.637915] Detected 1 PCC Subspaces
> [ 0.637915] Registering PCC driver as Mailbox controller
> [ 0.637915] Freeing SMP alternatives memory: 56K
> [ 0.639693] efi: Freeing EFI boot services memory: 86876K
> [ 0.639696] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
> [ 0.639733] PCI: ECAM [mem 0xf0000000-0xf7ffffff] (base 0xf0000000) for domain 0000 [bus 00-7f]
> [ 0.639739] PCI: Using configuration type 1 for base access
> [ 0.639775] virt/tdx: TDX not supported by the host platform
> [ 0.639816] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
> [ 0.640711] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
> [ 0.640711] HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
> [ 0.640711] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
> [ 0.640711] HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
> [ 0.641028] raid6: skipped pq benchmark and selected avx2x4
> [ 0.641030] raid6: using avx2x2 recovery algorithm
> [ 0.641692] ACPI: Added _OSI(Module Device)
> [ 0.641693] ACPI: Added _OSI(Processor Device)
> [ 0.641694] ACPI: Added _OSI(Processor Aggregator Device)
> [ 0.655960] ACPI: 12 ACPI AML tables successfully acquired and loaded
> [ 0.657155] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
> [ 0.661736] ACPI: \_SB_: platform _OSC: OS support mask [006a7efe]
> [ 0.662247] ACPI: Interpreter enabled
> [ 0.662256] ACPI: PM: (supports S0 S3 S4 S5)
> [ 0.662257] ACPI: Using IOAPIC for interrupt routing
> [ 0.662470] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
> [ 0.662470] PCI: Ignoring E820 reservations for host bridge windows
> [ 0.662470] ACPI: Enabled 8 GPEs in block 00 to 1F
> [ 0.667542] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
> [ 0.667546] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
> [ 0.667620] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
> [ 0.667627] acpi PNP0A08:00: [Firmware Info]: ECAM [mem 0xf0000000-0xf7ffffff] for domain 0000 [bus 00-7f] only partially covers this bridge
> [ 0.667830] PCI host bridge to bus 0000:00
> [ 0.667832] pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
> [ 0.667833] pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
> [ 0.667834] pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
> [ 0.667834] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
> [ 0.667835] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
> [ 0.667836] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfec2ffff window]
> [ 0.667836] pci_bus 0000:00: root bus resource [mem 0xfee00000-0xffffffff window]
> [ 0.667837] pci_bus 0000:00: root bus resource [bus 00-ff]
> [ 0.667846] pci 0000:00:00.0: [1022:1480] type 00 class 0x060000 conventional PCI endpoint
> [ 0.667927] pci 0000:00:00.2: [1022:1481] type 00 class 0x080600 conventional PCI endpoint
> [ 0.667999] pci 0000:00:01.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
> [ 0.668057] pci 0000:00:01.1: [1022:1483] type 01 class 0x060400 PCIe Root Port
> [ 0.668071] pci 0000:00:01.1: PCI bridge to [bus 01]
> [ 0.668075] pci 0000:00:01.1: bridge window [mem 0xfcf00000-0xfcffffff]
> [ 0.668131] pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
> [ 0.668241] pci 0000:00:01.2: [1022:1483] type 01 class 0x060400 PCIe Root Port
> [ 0.668255] pci 0000:00:01.2: PCI bridge to [bus 02-05]
> [ 0.668258] pci 0000:00:01.2: bridge window [io 0xf000-0xffff]
> [ 0.668260] pci 0000:00:01.2: bridge window [mem 0xfcb00000-0xfcdfffff]
> [ 0.668271] pci 0000:00:01.2: enabling Extended Tags
> [ 0.668316] pci 0000:00:01.2: PME# supported from D0 D3hot D3cold
> [ 0.668414] pci 0000:00:02.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
> [ 0.668467] pci 0000:00:03.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
> [ 0.668524] pci 0000:00:03.1: [1022:1483] type 01 class 0x060400 PCIe Root Port
> [ 0.668538] pci 0000:00:03.1: PCI bridge to [bus 06]
> [ 0.668541] pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
> [ 0.668543] pci 0000:00:03.1: bridge window [mem 0xfce00000-0xfcefffff]
> [ 0.668548] pci 0000:00:03.1: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
> [ 0.668599] pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
> [ 0.668912] pci 0000:00:04.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
> [ 0.668968] pci 0000:00:05.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
> [ 0.669022] pci 0000:00:07.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
> [ 0.669074] pci 0000:00:07.1: [1022:1484] type 01 class 0x060400 PCIe Root Port
> [ 0.669087] pci 0000:00:07.1: PCI bridge to [bus 07]
> [ 0.669101] pci 0000:00:07.1: enabling Extended Tags
> [ 0.669141] pci 0000:00:07.1: PME# supported from D0 D3hot D3cold
> [ 0.669231] pci 0000:00:08.0: [1022:1482] type 00 class 0x060000 conventional PCI endpoint
> [ 0.669287] pci 0000:00:08.1: [1022:1484] type 01 class 0x060400 PCIe Root Port
> [ 0.669301] pci 0000:00:08.1: PCI bridge to [bus 08]
> [ 0.669305] pci 0000:00:08.1: bridge window [mem 0xfc800000-0xfcafffff]
> [ 0.669316] pci 0000:00:08.1: enabling Extended Tags
> [ 0.669360] pci 0000:00:08.1: PME# supported from D0 D3hot D3cold
> [ 0.669470] pci 0000:00:14.0: [1022:790b] type 00 class 0x0c0500 conventional PCI endpoint
> [ 0.669551] pci 0000:00:14.3: [1022:790e] type 00 class 0x060100 conventional PCI endpoint
> [ 0.669640] pci 0000:00:18.0: [1022:1440] type 00 class 0x060000 conventional PCI endpoint
> [ 0.669660] pci 0000:00:18.1: [1022:1441] type 00 class 0x060000 conventional PCI endpoint
> [ 0.669680] pci 0000:00:18.2: [1022:1442] type 00 class 0x060000 conventional PCI endpoint
> [ 0.669702] pci 0000:00:18.3: [1022:1443] type 00 class 0x060000 conventional PCI endpoint
> [ 0.669722] pci 0000:00:18.4: [1022:1444] type 00 class 0x060000 conventional PCI endpoint
> [ 0.669741] pci 0000:00:18.5: [1022:1445] type 00 class 0x060000 conventional PCI endpoint
> [ 0.669761] pci 0000:00:18.6: [1022:1446] type 00 class 0x060000 conventional PCI endpoint
> [ 0.669780] pci 0000:00:18.7: [1022:1447] type 00 class 0x060000 conventional PCI endpoint
> [ 0.669858] pci 0000:01:00.0: [144d:a80a] type 00 class 0x010802 PCIe Endpoint
> [ 0.669894] pci 0000:01:00.0: BAR 0 [mem 0xfcf00000-0xfcf03fff 64bit]
> [ 0.670118] pci 0000:00:01.1: PCI bridge to [bus 01]
> [ 0.670177] pci 0000:02:00.0: [1022:43ee] type 00 class 0x0c0330 PCIe Legacy Endpoint
> [ 0.670217] pci 0000:02:00.0: BAR 0 [mem 0xfcda0000-0xfcda7fff 64bit]
> [ 0.670228] pci 0000:02:00.0: enabling Extended Tags
> [ 0.670290] pci 0000:02:00.0: PME# supported from D3hot D3cold
> [ 0.670408] pci 0000:02:00.1: [1022:43eb] type 00 class 0x010601 PCIe Legacy Endpoint
> [ 0.670450] pci 0000:02:00.1: BAR 5 [mem 0xfcd80000-0xfcd9ffff]
> [ 0.670452] pci 0000:02:00.1: ROM [mem 0xfcd00000-0xfcd7ffff pref]
> [ 0.670458] pci 0000:02:00.1: enabling Extended Tags
> [ 0.670507] pci 0000:02:00.1: PME# supported from D3hot D3cold
> [ 0.670588] pci 0000:02:00.2: [1022:43e9] type 01 class 0x060400 PCIe Switch Upstream Port
> [ 0.670614] pci 0000:02:00.2: PCI bridge to [bus 03-05]
> [ 0.670620] pci 0000:02:00.2: bridge window [io 0xf000-0xffff]
> [ 0.670623] pci 0000:02:00.2: bridge window [mem 0xfcb00000-0xfccfffff]
> [ 0.670644] pci 0000:02:00.2: enabling Extended Tags
> [ 0.670695] pci 0000:02:00.2: PME# supported from D3hot D3cold
> [ 0.670773] pci 0000:00:01.2: PCI bridge to [bus 02-05]
> [ 0.670873] pci 0000:03:08.0: [1022:43ea] type 01 class 0x060400 PCIe Switch Downstream Port
> [ 0.670900] pci 0000:03:08.0: PCI bridge to [bus 04]
> [ 0.670906] pci 0000:03:08.0: bridge window [io 0xf000-0xffff]
> [ 0.670909] pci 0000:03:08.0: bridge window [mem 0xfcc00000-0xfccfffff]
> [ 0.670932] pci 0000:03:08.0: enabling Extended Tags
> [ 0.670992] pci 0000:03:08.0: PME# supported from D3hot D3cold
> [ 0.671099] pci 0000:03:09.0: [1022:43ea] type 01 class 0x060400 PCIe Switch Downstream Port
> [ 0.671126] pci 0000:03:09.0: PCI bridge to [bus 05]
> [ 0.671134] pci 0000:03:09.0: bridge window [mem 0xfcb00000-0xfcbfffff]
> [ 0.671157] pci 0000:03:09.0: enabling Extended Tags
> [ 0.671216] pci 0000:03:09.0: PME# supported from D3hot D3cold
> [ 0.671317] pci 0000:02:00.2: PCI bridge to [bus 03-05]
> [ 0.671424] pci 0000:04:00.0: [10ec:8125] type 00 class 0x020000 PCIe Endpoint
> [ 0.671494] pci 0000:04:00.0: BAR 0 [io 0xf000-0xf0ff]
> [ 0.671500] pci 0000:04:00.0: BAR 2 [mem 0xfcc00000-0xfcc0ffff 64bit]
> [ 0.671504] pci 0000:04:00.0: BAR 4 [mem 0xfcc10000-0xfcc13fff 64bit]
> [ 0.671663] pci 0000:04:00.0: supports D1 D2
> [ 0.671663] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
> [ 0.671932] pci 0000:03:08.0: PCI bridge to [bus 04]
> [ 0.672031] pci 0000:05:00.0: [8086:2723] type 00 class 0x028000 PCIe Endpoint
> [ 0.672104] pci 0000:05:00.0: BAR 0 [mem 0xfcb00000-0xfcb03fff 64bit]
> [ 0.672242] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
> [ 0.672422] pci 0000:03:09.0: PCI bridge to [bus 05]
> [ 0.672501] pci 0000:06:00.0: [1002:6819] type 00 class 0x030000 PCIe Legacy Endpoint
> [ 0.672529] pci 0000:06:00.0: BAR 0 [mem 0xe0000000-0xefffffff 64bit pref]
> [ 0.672531] pci 0000:06:00.0: BAR 2 [mem 0xfce00000-0xfce3ffff 64bit]
> [ 0.672533] pci 0000:06:00.0: BAR 4 [io 0xe000-0xe0ff]
> [ 0.672535] pci 0000:06:00.0: ROM [mem 0xfce40000-0xfce5ffff pref]
> [ 0.672556] pci 0000:06:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
> [ 0.672596] pci 0000:06:00.0: supports D1 D2
> [ 0.672597] pci 0000:06:00.0: PME# supported from D1 D2 D3hot
> [ 0.672717] pci 0000:06:00.1: [1002:aab0] type 00 class 0x040300 PCIe Legacy Endpoint
> [ 0.672744] pci 0000:06:00.1: BAR 0 [mem 0xfce60000-0xfce63fff 64bit]
> [ 0.672791] pci 0000:06:00.1: supports D1 D2
> [ 0.672866] pci 0000:00:03.1: PCI bridge to [bus 06]
> [ 0.672910] pci 0000:07:00.0: [1022:148a] type 00 class 0x130000 PCIe Endpoint
> [ 0.672936] pci 0000:07:00.0: enabling Extended Tags
> [ 0.673066] pci 0000:00:07.1: PCI bridge to [bus 07]
> [ 0.673116] pci 0000:08:00.0: [1022:1485] type 00 class 0x130000 PCIe Endpoint
> [ 0.673148] pci 0000:08:00.0: enabling Extended Tags
> [ 0.673302] pci 0000:08:00.1: [1022:1486] type 00 class 0x108000 PCIe Endpoint
> [ 0.673328] pci 0000:08:00.1: BAR 2 [mem 0xfc900000-0xfc9fffff]
> [ 0.673331] pci 0000:08:00.1: BAR 5 [mem 0xfca08000-0xfca09fff]
> [ 0.673336] pci 0000:08:00.1: enabling Extended Tags
> [ 0.673466] pci 0000:08:00.3: [1022:149c] type 00 class 0x0c0330 PCIe Endpoint
> [ 0.673493] pci 0000:08:00.3: BAR 0 [mem 0xfc800000-0xfc8fffff 64bit]
> [ 0.673501] pci 0000:08:00.3: enabling Extended Tags
> [ 0.673548] pci 0000:08:00.3: PME# supported from D0 D3hot D3cold
> [ 0.673644] pci 0000:08:00.4: [1022:1487] type 00 class 0x040300 PCIe Endpoint
> [ 0.673669] pci 0000:08:00.4: BAR 0 [mem 0xfca00000-0xfca07fff]
> [ 0.673678] pci 0000:08:00.4: enabling Extended Tags
> [ 0.673729] pci 0000:08:00.4: PME# supported from D0 D3hot D3cold
> [ 0.673828] pci 0000:00:08.1: PCI bridge to [bus 08]
> [ 0.674935] ACPI: PCI: Interrupt link LNKA configured for IRQ 0
> [ 0.674966] ACPI: PCI: Interrupt link LNKB configured for IRQ 0
> [ 0.674990] ACPI: PCI: Interrupt link LNKC configured for IRQ 0
> [ 0.675020] ACPI: PCI: Interrupt link LNKD configured for IRQ 0
> [ 0.675047] ACPI: PCI: Interrupt link LNKE configured for IRQ 0
> [ 0.675069] ACPI: PCI: Interrupt link LNKF configured for IRQ 0
> [ 0.675091] ACPI: PCI: Interrupt link LNKG configured for IRQ 0
> [ 0.675112] ACPI: PCI: Interrupt link LNKH configured for IRQ 0
> [ 0.675690] iommu: Default domain type: Translated
> [ 0.675690] iommu: DMA domain TLB invalidation policy: lazy mode
> [ 0.676765] SCSI subsystem initialized
> [ 0.676770] libata version 3.00 loaded.
> [ 0.676770] ACPI: bus type USB registered
> [ 0.676770] usbcore: registered new interface driver usbfs
> [ 0.676770] usbcore: registered new interface driver hub
> [ 0.676770] usbcore: registered new device driver usb
> [ 0.676770] EDAC MC: Ver: 3.0.0
> [ 0.676786] efivars: Registered efivars operations
> [ 0.676787] NetLabel: Initializing
> [ 0.676788] NetLabel: domain hash size = 128
> [ 0.676789] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
> [ 0.676798] NetLabel: unlabeled traffic allowed by default
> [ 0.676801] mctp: management component transport protocol core
> [ 0.676801] NET: Registered PF_MCTP protocol family
> [ 0.676805] PCI: Using ACPI for IRQ routing
> [ 0.680259] PCI: pci_cache_line_size set to 64 bytes
> [ 0.680314] e820: register RAM buffer resource [mem 0x09c3f000-0x0bffffff]
> [ 0.680315] e820: register RAM buffer resource [mem 0x0a200000-0x0bffffff]
> [ 0.680316] e820: register RAM buffer resource [mem 0x0b000000-0x0bffffff]
> [ 0.680316] e820: register RAM buffer resource [mem 0xb5b76000-0xb7ffffff]
> [ 0.680317] e820: register RAM buffer resource [mem 0xb8079000-0xbbffffff]
> [ 0.680317] e820: register RAM buffer resource [mem 0xb9d85000-0xbbffffff]
> [ 0.680318] e820: register RAM buffer resource [mem 0xbf000000-0xbfffffff]
> [ 0.680318] e820: register RAM buffer resource [mem 0x103f300000-0x103fffffff]
> [ 0.680707] pci 0000:06:00.0: vgaarb: setting as boot VGA device
> [ 0.680707] pci 0000:06:00.0: vgaarb: bridge control possible
> [ 0.680707] pci 0000:06:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
> [ 0.680707] vgaarb: loaded
> [ 0.680708] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
> [ 0.680710] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
> [ 0.682724] clocksource: Switched to clocksource tsc-early
> [ 0.682821] VFS: Disk quotas dquot_6.6.0
> [ 0.682828] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
> [ 0.682865] acpi PNP0C01:00: Reserved [mem 0xf0000000-0xf7ffffff]
> [ 0.682869] acpi PNP0C02:00: Reserved [mem 0xfeb80000-0xfebfffff]
> [ 0.682879] acpi PNP0C02:01: Reserved [mem 0xfd200000-0xfd2fffff]
> [ 0.682947] acpi PNP0C02:02: Reserved [io 0x0a00-0x0a2f]
> [ 0.682948] acpi PNP0C02:02: Reserved [io 0x0a30-0x0a3f]
> [ 0.682948] acpi PNP0C02:02: Reserved [io 0x0a40-0x0a4f]
> [ 0.682949] acpi PNP0C02:02: Reserved [mem 0xfe000000-0xfe00ffff]
> [ 0.683025] acpi PNP0C02:03: Skipped [io 0x0010-0x001f]
> [ 0.683026] acpi PNP0C02:03: Skipped [io 0x0022-0x003f]
> [ 0.683026] acpi PNP0C02:03: Skipped [io 0x0063]
> [ 0.683027] acpi PNP0C02:03: Skipped [io 0x0065]
> [ 0.683027] acpi PNP0C02:03: Skipped [io 0x0067-0x006f]
> [ 0.683028] acpi PNP0C02:03: Skipped [io 0x0072-0x007f]
> [ 0.683028] acpi PNP0C02:03: Skipped [io 0x0080]
> [ 0.683028] acpi PNP0C02:03: Skipped [io 0x0084-0x0086]
> [ 0.683029] acpi PNP0C02:03: Skipped [io 0x0088]
> [ 0.683029] acpi PNP0C02:03: Skipped [io 0x008c-0x008e]
> [ 0.683030] acpi PNP0C02:03: Skipped [io 0x0090-0x009f]
> [ 0.683030] acpi PNP0C02:03: Skipped [io 0x00a2-0x00bf]
> [ 0.683031] acpi PNP0C02:03: Skipped [io 0x00b1]
> [ 0.683031] acpi PNP0C02:03: Skipped [io 0x00e0-0x00ef]
> [ 0.683032] acpi PNP0C02:03: Reserved [io 0x04d0-0x04d1]
> [ 0.683032] acpi PNP0C02:03: Reserved [io 0x040b]
> [ 0.683033] acpi PNP0C02:03: Reserved [io 0x04d6]
> [ 0.683033] acpi PNP0C02:03: Reserved [io 0x0c00-0x0c01]
> [ 0.683034] acpi PNP0C02:03: Reserved [io 0x0c14]
> [ 0.683035] acpi PNP0C02:03: Reserved [io 0x0c50-0x0c51]
> [ 0.683035] acpi PNP0C02:03: Reserved [io 0x0c52]
> [ 0.683036] acpi PNP0C02:03: Reserved [io 0x0c6c]
> [ 0.683036] acpi PNP0C02:03: Reserved [io 0x0c6f]
> [ 0.683037] acpi PNP0C02:03: Reserved [io 0x0cd8-0x0cdf]
> [ 0.683037] acpi PNP0C02:03: Reserved [io 0x0800-0x089f]
> [ 0.683038] acpi PNP0C02:03: Reserved [io 0x0b00-0x0b0f]
> [ 0.683038] acpi PNP0C02:03: Reserved [io 0x0b20-0x0b3f]
> [ 0.683039] acpi PNP0C02:03: Reserved [io 0x0900-0x090f]
> [ 0.683040] acpi PNP0C02:03: Reserved [io 0x0910-0x091f]
> [ 0.683041] acpi PNP0C02:03: Could not reserve [mem 0xfec00000-0xfec00fff]
> [ 0.683042] acpi PNP0C02:03: Could not reserve [mem 0xfec01000-0xfec01fff]
> [ 0.683042] acpi PNP0C02:03: Reserved [mem 0xfedc0000-0xfedc0fff]
> [ 0.683044] acpi PNP0C02:03: Reserved [mem 0xfee00000-0xfee00fff]
> [ 0.683045] acpi PNP0C02:03: Could not reserve [mem 0xfed80000-0xfed8ffff]
> [ 0.683047] acpi PNP0C02:03: Reserved [mem 0xfec10000-0xfec10fff]
> [ 0.683048] acpi PNP0C02:03: Reserved [mem 0xff000000-0xffffffff]
> [ 0.683070] pnp: PnP ACPI init
> [ 0.683382] pnp: PnP ACPI: found 0 devices
> [ 0.688630] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
> [ 0.688680] NET: Registered PF_INET protocol family
> [ 0.688805] IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
> [ 0.690569] tcp_listen_portaddr_hash hash table entries: 32768 (order: 7, 524288 bytes, linear)
> [ 0.690602] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
> [ 0.690824] TCP established hash table entries: 524288 (order: 10, 4194304 bytes, linear)
> [ 0.691150] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
> [ 0.691223] TCP: Hash tables configured (established 524288 bind 65536)
> [ 0.691369] MPTCP token hash table entries: 65536 (order: 9, 1572864 bytes, linear)
> [ 0.691519] UDP hash table entries: 32768 (order: 9, 2097152 bytes, linear)
> [ 0.691633] NET: Registered PF_UNIX/PF_LOCAL protocol family
> [ 0.691637] NET: Registered PF_XDP protocol family
> [ 0.691643] pci 0000:00:01.1: PCI bridge to [bus 01]
> [ 0.691646] pci 0000:00:01.1: bridge window [mem 0xfcf00000-0xfcffffff]
> [ 0.691651] pci 0000:03:08.0: PCI bridge to [bus 04]
> [ 0.691653] pci 0000:03:08.0: bridge window [io 0xf000-0xffff]
> [ 0.691657] pci 0000:03:08.0: bridge window [mem 0xfcc00000-0xfccfffff]
> [ 0.691664] pci 0000:03:09.0: PCI bridge to [bus 05]
> [ 0.691667] pci 0000:03:09.0: bridge window [mem 0xfcb00000-0xfcbfffff]
> [ 0.691674] pci 0000:02:00.2: PCI bridge to [bus 03-05]
> [ 0.691676] pci 0000:02:00.2: bridge window [io 0xf000-0xffff]
> [ 0.691679] pci 0000:02:00.2: bridge window [mem 0xfcb00000-0xfccfffff]
> [ 0.691686] pci 0000:00:01.2: PCI bridge to [bus 02-05]
> [ 0.691687] pci 0000:00:01.2: bridge window [io 0xf000-0xffff]
> [ 0.691689] pci 0000:00:01.2: bridge window [mem 0xfcb00000-0xfcdfffff]
> [ 0.691694] pci 0000:00:03.1: PCI bridge to [bus 06]
> [ 0.691695] pci 0000:00:03.1: bridge window [io 0xe000-0xefff]
> [ 0.691697] pci 0000:00:03.1: bridge window [mem 0xfce00000-0xfcefffff]
> [ 0.691699] pci 0000:00:03.1: bridge window [mem 0xe0000000-0xefffffff 64bit pref]
> [ 0.691702] pci 0000:00:07.1: PCI bridge to [bus 07]
> [ 0.691707] pci 0000:00:08.1: PCI bridge to [bus 08]
> [ 0.691709] pci 0000:00:08.1: bridge window [mem 0xfc800000-0xfcafffff]
> [ 0.691714] pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
> [ 0.691715] pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
> [ 0.691715] pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
> [ 0.691716] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
> [ 0.691716] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
> [ 0.691717] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfec2ffff window]
> [ 0.691717] pci_bus 0000:00: resource 10 [mem 0xfee00000-0xffffffff window]
> [ 0.691718] pci_bus 0000:01: resource 1 [mem 0xfcf00000-0xfcffffff]
> [ 0.691719] pci_bus 0000:02: resource 0 [io 0xf000-0xffff]
> [ 0.691719] pci_bus 0000:02: resource 1 [mem 0xfcb00000-0xfcdfffff]
> [ 0.691720] pci_bus 0000:03: resource 0 [io 0xf000-0xffff]
> [ 0.691720] pci_bus 0000:03: resource 1 [mem 0xfcb00000-0xfccfffff]
> [ 0.691721] pci_bus 0000:04: resource 0 [io 0xf000-0xffff]
> [ 0.691721] pci_bus 0000:04: resource 1 [mem 0xfcc00000-0xfccfffff]
> [ 0.691722] pci_bus 0000:05: resource 1 [mem 0xfcb00000-0xfcbfffff]
> [ 0.691723] pci_bus 0000:06: resource 0 [io 0xe000-0xefff]
> [ 0.691723] pci_bus 0000:06: resource 1 [mem 0xfce00000-0xfcefffff]
> [ 0.691724] pci_bus 0000:06: resource 2 [mem 0xe0000000-0xefffffff 64bit pref]
> [ 0.691724] pci_bus 0000:08: resource 1 [mem 0xfc800000-0xfcafffff]
> [ 0.691857] pci 0000:06:00.1: D0 power state depends on 0000:06:00.0
> [ 0.691932] PCI: CLS 64 bytes, default 64
> [ 0.691940] pci 0000:00:00.2: AMD-Vi: IOMMU performance counters supported
> [ 0.691960] Trying to unpack rootfs image as initramfs...
> [ 0.691968] pci 0000:00:01.0: Adding to iommu group 0
> [ 0.691975] pci 0000:00:01.1: Adding to iommu group 1
> [ 0.691980] pci 0000:00:01.2: Adding to iommu group 2
> [ 0.691987] pci 0000:00:02.0: Adding to iommu group 3
> [ 0.691994] pci 0000:00:03.0: Adding to iommu group 4
> [ 0.691999] pci 0000:00:03.1: Adding to iommu group 5
> [ 0.692004] pci 0000:00:04.0: Adding to iommu group 6
> [ 0.692009] pci 0000:00:05.0: Adding to iommu group 7
> [ 0.692017] pci 0000:00:07.0: Adding to iommu group 8
> [ 0.692022] pci 0000:00:07.1: Adding to iommu group 9
> [ 0.692030] pci 0000:00:08.0: Adding to iommu group 10
> [ 0.692035] pci 0000:00:08.1: Adding to iommu group 11
> [ 0.692043] pci 0000:00:14.0: Adding to iommu group 12
> [ 0.692047] pci 0000:00:14.3: Adding to iommu group 12
> [ 0.692064] pci 0000:00:18.0: Adding to iommu group 13
> [ 0.692068] pci 0000:00:18.1: Adding to iommu group 13
> [ 0.692072] pci 0000:00:18.2: Adding to iommu group 13
> [ 0.692076] pci 0000:00:18.3: Adding to iommu group 13
> [ 0.692080] pci 0000:00:18.4: Adding to iommu group 13
> [ 0.692084] pci 0000:00:18.5: Adding to iommu group 13
> [ 0.692088] pci 0000:00:18.6: Adding to iommu group 13
> [ 0.692092] pci 0000:00:18.7: Adding to iommu group 13
> [ 0.692097] pci 0000:01:00.0: Adding to iommu group 14
> [ 0.692106] pci 0000:02:00.0: Adding to iommu group 15
> [ 0.692111] pci 0000:02:00.1: Adding to iommu group 15
> [ 0.692115] pci 0000:02:00.2: Adding to iommu group 15
> [ 0.692117] pci 0000:03:08.0: Adding to iommu group 15
> [ 0.692119] pci 0000:03:09.0: Adding to iommu group 15
> [ 0.692120] pci 0000:04:00.0: Adding to iommu group 15
> [ 0.692124] pci 0000:05:00.0: Adding to iommu group 15
> [ 0.692135] pci 0000:06:00.0: Adding to iommu group 16
> [ 0.692140] pci 0000:06:00.1: Adding to iommu group 16
> [ 0.692145] pci 0000:07:00.0: Adding to iommu group 17
> [ 0.692151] pci 0000:08:00.0: Adding to iommu group 18
> [ 0.692158] pci 0000:08:00.1: Adding to iommu group 19
> [ 0.692164] pci 0000:08:00.3: Adding to iommu group 20
> [ 0.692170] pci 0000:08:00.4: Adding to iommu group 21
> [ 0.693821] AMD-Vi: Extended features (0x58f77ef22294a5a, 0x0): PPR NX GT IA PC GA_vAPIC
> [ 0.693824] AMD-Vi: Interrupt remapping enabled
> [ 0.693881] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
> [ 0.693883] software IO TLB: mapped [mem 0x00000000b13ca000-0x00000000b53ca000] (64MB)
> [ 0.693912] LVT offset 0 assigned for vector 0x400
> [ 0.695508] perf: AMD IBS detected (0x000003ff)
> [ 0.695512] perf/amd_iommu: Detected AMD IOMMU #0 (2 banks, 4 counters/bank).
> [ 0.703090] Initialise system trusted keyrings
> [ 0.703099] Key type blacklist registered
> [ 0.703146] workingset: timestamp_bits=36 (anon: 32) max_order=24 bucket_order=0 (anon: 0)
> [ 0.703312] fuse: init (API version 7.45)
> [ 0.703356] integrity: Platform Keyring initialized
> [ 0.703358] integrity: Machine keyring initialized
> [ 0.708496] Key type asymmetric registered
> [ 0.708496] Asymmetric key parser 'x509' registered
> [ 0.708508] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
> [ 0.708543] io scheduler mq-deadline registered
> [ 0.708544] io scheduler kyber registered
> [ 0.708551] io scheduler bfq registered
> [ 0.709536] ledtrig-cpu: registered to indicate activity on CPUs
> [ 0.709600] pcieport 0000:00:01.1: PME: Signaling with IRQ 27
> [ 0.709701] pcieport 0000:00:01.2: PME: Signaling with IRQ 28
> [ 0.709796] pcieport 0000:00:03.1: PME: Signaling with IRQ 29
> [ 0.709943] pcieport 0000:00:07.1: PME: Signaling with IRQ 31
> [ 0.709977] pcieport 0000:00:07.1: AER: enabled with IRQ 31
> [ 0.710069] pcieport 0000:00:08.1: PME: Signaling with IRQ 32
> [ 0.710106] pcieport 0000:00:08.1: AER: enabled with IRQ 32
> [ 0.710539] input: Power Button as /devices/platform/PNP0C0C:00/input/input0
> [ 0.710549] ACPI: button: Power Button [PWRB]
> [ 0.710560] input: Power Button as /devices/platform/LNXPWRBN:00/input/input1
> [ 0.710574] ACPI: button: Power Button [PWRF]
> [ 0.710591] Monitor-Mwait will be used to enter C-1 state
> [ 0.714917] Estimated ratio of average max frequency by base frequency (times 1024): 1197
> [ 0.714998] ACPI: \_TZ_.UAD0: _PSL evaluation failure
> [ 0.715044] acpi LNXTHERM:00: registered as thermal_zone0
> [ 0.715045] ACPI: thermal: Thermal Zone [UAD0] (17 C)
> [ 0.715128] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
> [ 0.716048] Non-volatile memory driver v1.3
> [ 0.723511] Freeing initrd memory: 12616K
> [ 0.775918] tpm_crb_acpi MSFT0101:00: Disabling hwrng
> [ 0.776042] ACPI: bus type drm_connector registered
> [ 0.776053] Unsupported value for CONFIG_DRM_PANIC_SCREEN ('qr_code'), falling back to 'user'...
> [ 0.776809] ahci 0000:02:00.1: enabling device (0000 -> 0002)
> [ 0.776891] ahci 0000:02:00.1: SSS flag set, parallel bus scan disabled
> [ 0.776944] ahci 0000:02:00.1: AHCI vers 0001.0301, 32 command slots, 6 Gbps, SATA mode
> [ 0.776945] ahci 0000:02:00.1: 6/6 ports implemented (port mask 0x3f)
> [ 0.776946] ahci 0000:02:00.1: flags: 64bit ncq sntf stag pm led clo only pmp pio slum part sxs deso sadm sds apst
> [ 0.777178] scsi host0: ahci
> [ 0.777243] scsi host1: ahci
> [ 0.777289] scsi host2: ahci
> [ 0.777339] scsi host3: ahci
> [ 0.777383] scsi host4: ahci
> [ 0.777430] scsi host5: ahci
> [ 0.777448] ata1: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80100 irq 38 lpm-pol 1 ext
> [ 0.777450] ata2: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80180 irq 38 lpm-pol 1 ext
> [ 0.777451] ata3: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80200 irq 38 lpm-pol 1 ext
> [ 0.777453] ata4: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80280 irq 38 lpm-pol 1 ext
> [ 0.777454] ata5: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80300 irq 38 lpm-pol 1 ext
> [ 0.777455] ata6: SATA max UDMA/133 abar m131072@0xfcd80000 port 0xfcd80380 irq 38 lpm-pol 1 ext
> [ 0.777534] xhci_hcd 0000:02:00.0: xHCI Host Controller
> [ 0.777537] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
> [ 0.832942] xhci_hcd 0000:02:00.0: hcc params 0x0200ef81 hci version 0x110 quirks 0x0000000000000010
> [ 0.833160] xhci_hcd 0000:02:00.0: xHCI Host Controller
> [ 0.833161] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 2
> [ 0.833162] xhci_hcd 0000:02:00.0: Host supports USB 3.1 Enhanced SuperSpeed
> [ 0.833258] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 7.01
> [ 0.833259] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 0.833260] usb usb1: Product: xHCI Host Controller
> [ 0.833260] usb usb1: Manufacturer: Linux 7.1.0-rc1 xhci-hcd
> [ 0.833261] usb usb1: SerialNumber: 0000:02:00.0
> [ 0.833316] hub 1-0:1.0: USB hub found
> [ 0.833329] hub 1-0:1.0: 10 ports detected
> [ 0.833505] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
> [ 0.833513] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 7.01
> [ 0.833514] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 0.833514] usb usb2: Product: xHCI Host Controller
> [ 0.833515] usb usb2: Manufacturer: Linux 7.1.0-rc1 xhci-hcd
> [ 0.833515] usb usb2: SerialNumber: 0000:02:00.0
> [ 0.833549] hub 2-0:1.0: USB hub found
> [ 0.833555] hub 2-0:1.0: 4 ports detected
> [ 0.833665] xhci_hcd 0000:08:00.3: xHCI Host Controller
> [ 0.833667] xhci_hcd 0000:08:00.3: new USB bus registered, assigned bus number 3
> [ 0.833768] xhci_hcd 0000:08:00.3: hcc params 0x0278ffe5 hci version 0x110 quirks 0x0000000000000010
> [ 0.833955] xhci_hcd 0000:08:00.3: xHCI Host Controller
> [ 0.833957] xhci_hcd 0000:08:00.3: new USB bus registered, assigned bus number 4
> [ 0.833957] xhci_hcd 0000:08:00.3: Host supports USB 3.1 Enhanced SuperSpeed
> [ 0.833973] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 7.01
> [ 0.833974] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 0.833975] usb usb3: Product: xHCI Host Controller
> [ 0.833975] usb usb3: Manufacturer: Linux 7.1.0-rc1 xhci-hcd
> [ 0.833976] usb usb3: SerialNumber: 0000:08:00.3
> [ 0.834016] hub 3-0:1.0: USB hub found
> [ 0.834020] hub 3-0:1.0: 4 ports detected
> [ 0.834130] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
> [ 0.834137] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 7.01
> [ 0.834138] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
> [ 0.834139] usb usb4: Product: xHCI Host Controller
> [ 0.834139] usb usb4: Manufacturer: Linux 7.1.0-rc1 xhci-hcd
> [ 0.834140] usb usb4: SerialNumber: 0000:08:00.3
> [ 0.834170] hub 4-0:1.0: USB hub found
> [ 0.834175] hub 4-0:1.0: 4 ports detected
> [ 0.834267] usbcore: registered new interface driver usbserial_generic
> [ 0.834269] usbserial: USB Serial support registered for generic
> [ 0.834283] i8042: PNP: No PS/2 controller found.
> [ 0.834350] rtc_cmos PNP0B00:00: RTC can wake from S4
> [ 0.834521] rtc_cmos PNP0B00:00: registered as rtc0
> [ 0.834547] rtc_cmos PNP0B00:00: setting system clock to 2026-04-29T10:27:48 UTC (1777458468)
> [ 0.834563] rtc_cmos PNP0B00:00: alarms up to one month, y3k, 114 bytes nvram
> [ 0.931490] simple-framebuffer simple-framebuffer.0: [drm] Registered 1 planes with drm panic
> [ 0.931519] [drm] Initialized simpledrm 1.0.0 for simple-framebuffer.0 on minor 0
> [ 0.933645] fbcon: Deferring console take-over
> [ 0.933648] simple-framebuffer simple-framebuffer.0: [drm] fb0: simpledrmdrmfb frame buffer device
> [ 0.933683] hid: raw HID events driver (C) Jiri Kosina
> [ 0.933709] usbcore: registered new interface driver usbhid
> [ 0.933710] usbhid: USB HID core driver
> [ 0.933764] drop_monitor: Initializing network drop monitor service
> [ 0.933903] NET: Registered PF_INET6 protocol family
> [ 0.934226] Segment Routing with IPv6
> [ 0.934228] RPL Segment Routing with IPv6
> [ 0.934236] In-situ OAM (IOAM) with IPv6
> [ 0.934259] NET: Registered PF_PACKET protocol family
> [ 0.936086] x86/amd: Previous system reset reason [0x00080800]: software wrote 0x6 to reset control register 0xCF9
> [ 0.936105] microcode: Current revision: 0x0a201213
> [ 0.936604] resctrl: L3 allocation detected
> [ 0.936606] resctrl: MB allocation detected
> [ 0.936607] resctrl: L3 monitoring detected
> [ 0.936635] IPI shorthand broadcast: enabled
> [ 0.939169] sched_clock: Marking stable (622645566, 316266886)->(963658783, -24746331)
> [ 0.939438] registered taskstats version 1
> [ 0.940257] Loading compiled-in X.509 certificates
> [ 0.948578] Loaded X.509 cert 'Build time autogenerated kernel key: ce454674b523df33fb5f791c1b2ac6e1e8d846a0'
> [ 0.950953] Demotion targets for Node 0: null
> [ 0.951151] Key type .fscrypt registered
> [ 0.951153] Key type fscrypt-provisioning registered
> [ 0.951508] Btrfs loaded, zoned=yes, fsverity=yes
> [ 0.951541] Key type big_key registered
> [ 0.952098] PM: Magic number: 6:154:478
> [ 0.952106] rtc rtc0: hash matches
> [ 0.952303] RAS: Correctable Errors collector initialized.
> [ 0.952587] clk: Disabling unused clocks
> [ 0.952590] PM: genpd: Disabling unused power domains
> [ 1.129704] usb 1-5: new full-speed USB device number 2 using xhci_hcd
> [ 1.244390] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
> [ 1.245797] ata1.00: HPA detected: current 976771055, native 976773168
> [ 1.245802] ata1.00: ATA-8: ST3500320AS, SD81, max UDMA/133
> [ 1.245805] ata1.00: 976771055 sectors, multi 0: LBA48 NCQ (depth 32)
> [ 1.247571] ata1.00: configured for UDMA/133
> [ 1.258492] scsi 0:0:0:0: Direct-Access ATA ST3500320AS SD81 PQ: 0 ANSI: 5
> [ 1.258771] sd 0:0:0:0: [sda] 976771055 512-byte logical blocks: (500 GB/466 GiB)
> [ 1.258782] sd 0:0:0:0: [sda] Write Protect is off
> [ 1.258785] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
> [ 1.258796] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> [ 1.258815] sd 0:0:0:0: [sda] Preferred minimum I/O size 512 bytes
> [ 1.328211] sda: sda1 sda2 < sda5 sda6 sda7 > sda3
> [ 1.328420] sd 0:0:0:0: [sda] Attached SCSI disk
> [ 1.505166] usb 1-5: New USB device found, idVendor=8087, idProduct=0029, bcdDevice= 0.01
> [ 1.505173] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> [ 1.569494] ata2: SATA link down (SStatus 0 SControl 300)
> [ 1.690618] usb 1-6: new high-speed USB device number 3 using xhci_hcd
> [ 1.724657] tsc: Refined TSC clocksource calibration: 3693.059 MHz
> [ 1.724671] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x6a77744cfd5, max_idle_ns: 881590969987 ns
> [ 1.724785] clocksource: Switched to clocksource tsc
> [ 1.891107] ata3: SATA link down (SStatus 0 SControl 300)
> [ 1.899397] usb 1-6: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
> [ 1.899406] usb 1-6: New USB device strings: Mfr=0, Product=1, SerialNumber=0
> [ 1.899409] usb 1-6: Product: USB2.0 Hub
> [ 1.907453] hub 1-6:1.0: USB hub found
> [ 1.911384] hub 1-6:1.0: 4 ports detected
> [ 2.106605] usb 1-7: new full-speed USB device number 4 using xhci_hcd
> [ 2.210264] ata4: SATA link down (SStatus 0 SControl 300)
> [ 2.449618] usb 1-6.1: new high-speed USB device number 5 using xhci_hcd
> [ 2.481124] usb 1-7: New USB device found, idVendor=048d, idProduct=5702, bcdDevice= 0.01
> [ 2.481134] usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 2.481137] usb 1-7: Product: ITE Device
> [ 2.481139] usb 1-7: Manufacturer: ITE Tech. Inc.
> [ 2.494092] hid-generic 0003:048D:5702.0001: hiddev96,hidraw0: USB HID v1.12 Device [ITE Tech. Inc. ITE Device] on usb-0000:02:00.0-7/input0
> [ 2.534071] ata5: SATA link down (SStatus 0 SControl 300)
> [ 2.739620] usb 1-10: new high-speed USB device number 6 using xhci_hcd
> [ 2.835362] usb 1-6.1: New USB device found, idVendor=046d, idProduct=0825, bcdDevice= 0.10
> [ 2.835372] usb 1-6.1: New USB device strings: Mfr=0, Product=0, SerialNumber=2
> [ 2.835374] usb 1-6.1: SerialNumber: 2EE9AB20
> [ 2.949333] usb 1-10: New USB device found, idVendor=05e3, idProduct=0608, bcdDevice=85.36
> [ 2.949343] usb 1-10: New USB device strings: Mfr=0, Product=1, SerialNumber=0
> [ 2.949345] usb 1-10: Product: USB2.0 Hub
> [ 2.960700] hub 1-10:1.0: USB hub found
> [ 2.964337] hub 1-10:1.0: 4 ports detected
> [ 3.004618] usb 1-6.2: new low-speed USB device number 7 using xhci_hcd
> [ 3.246334] usb 1-6.2: New USB device found, idVendor=046d, idProduct=c31c, bcdDevice=64.00
> [ 3.246344] usb 1-6.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 3.246347] usb 1-6.2: Product: USB Keyboard
> [ 3.246349] usb 1-6.2: Manufacturer: Logitech
> [ 3.315965] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-6/1-6.2/1-6.2:1.0/0003:046D:C31C.0002/input/input2
> [ 3.367023] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-0000:02:00.0-6.2/input0
> [ 3.426902] input: Logitech USB Keyboard Consumer Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-6/1-6.2/1-6.2:1.1/0003:046D:C31C.0003/input/input3
> [ 3.477763] input: Logitech USB Keyboard System Control as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-6/1-6.2/1-6.2:1.1/0003:046D:C31C.0003/input/input4
> [ 3.477847] hid-generic 0003:046D:C31C.0003: input,hidraw2: USB HID v1.10 Device [Logitech USB Keyboard] on usb-0000:02:00.0-6.2/input1
> [ 3.557336] usb 1-6.3: new low-speed USB device number 8 using xhci_hcd
> [ 3.580330] ata6: failed to resume link (SControl 0)
> [ 3.580354] ata6: SATA link down (SStatus 0 SControl 0)
> [ 3.593102] Freeing unused decrypted memory: 2028K
> [ 3.593845] Freeing unused kernel image (initmem) memory: 4788K
> [ 3.593863] Write protecting the kernel read-only data: 36864k
> [ 3.594182] Freeing unused kernel image (text/rodata gap) memory: 408K
> [ 3.594283] Freeing unused kernel image (rodata/data gap) memory: 292K
> [ 3.610587] x86/mm: Checked W+X mappings: passed, no W+X pages found.
> [ 3.610595] rodata_test: all tests were successful
> [ 3.610603] Run /init as init process
> [ 3.610605] with arguments:
> [ 3.610606] /init
> [ 3.610608] with environment:
> [ 3.610609] HOME=/
> [ 3.610610] TERM=linux
> [ 3.630680] systemd[1]: Successfully made /usr/ read-only.
> [ 3.793325] usb 1-6.3: New USB device found, idVendor=046d, idProduct=c05a, bcdDevice=54.00
> [ 3.793334] usb 1-6.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 3.793337] usb 1-6.3: Product: USB Optical Mouse
> [ 3.793339] usb 1-6.3: Manufacturer: Logitech
> [ 3.832899] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:01.2/0000:02:00.0/usb1/1-6/1-6.3/1-6.3:1.0/0003:046D:C05A.0004/input/input5
> [ 3.833020] hid-generic 0003:046D:C05A.0004: input,hidraw3: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:02:00.0-6.3/input0
> [ 3.912337] usb 1-6.4: new high-speed USB device number 9 using xhci_hcd
> [ 3.964736] systemd[1]: systemd 260.1-2-arch running in system mode (+PAM +AUDIT -SELINUX +APPARMOR -IMA +IPE +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +BTF +XKBCOMMON +UTMP +LIBARCHIVE)
> [ 3.964748] systemd[1]: Detected architecture x86-64.
> [ 3.964752] systemd[1]: Running in initrd.
> [ 3.965072] fbcon: Taking over console
> [ 3.967389] Console: switching to colour frame buffer device 240x67
> [ 3.971100] systemd[1]: Initializing machine ID from random generator.
> [ 3.988476] clocksource: Watchdog remote CPU 5 read timed out
> [ 4.015201] systemd[1]: Queued start job for default target Initrd Default Target.
> [ 4.021231] usb 1-6.4: New USB device found, idVendor=03f0, idProduct=5b12, bcdDevice= 1.00
> [ 4.021239] usb 1-6.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
> [ 4.021242] usb 1-6.4: Product: Officejet Pro 8100
> [ 4.021244] usb 1-6.4: Manufacturer: HP
> [ 4.021246] usb 1-6.4: SerialNumber: CN38UBVGGP05MX
> [ 4.081955] systemd[1]: Created slice Slice /system/systemd-cryptsetup.
> [ 4.082246] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
> [ 4.082454] systemd[1]: Expecting device /dev/disk/by-uuid/f57b6e73-6f79-41f3-b733-266aa9695b49...
> [ 4.082540] systemd[1]: Expecting device /dev/mapper/nvme0n1p3-encrypted...
> [ 4.082598] systemd[1]: Reached target Path Units.
> [ 4.082642] systemd[1]: Reached target Slice Units.
> [ 4.082685] systemd[1]: Reached target Swaps.
> [ 4.082727] systemd[1]: Reached target Timer Units.
> [ 4.082861] systemd[1]: Listening on Journal Socket (/dev/log).
> [ 4.082984] systemd[1]: Listening on Journal Sockets.
> [ 4.083098] systemd[1]: Listening on udev Control Socket.
> [ 4.083188] systemd[1]: Listening on udev Kernel Socket.
> [ 4.083236] systemd[1]: Reached target Socket Units.
> [ 4.085791] systemd[1]: Starting Create List of Static Device Nodes...
> [ 4.086142] systemd[1]: Early Battery Level Check skipped, unmet condition check ConditionDirectoryNotEmpty=/sys/class/power_supply
> [ 4.089007] systemd[1]: Started Display Boot-Time Emergency Messages In Full Screen.
> [ 4.095041] systemd[1]: Starting Journal Service...
> [ 4.098060] systemd[1]: Starting Load Kernel Modules...
> [ 4.098501] systemd[1]: TPM PCR Barrier (initrd) skipped, unmet condition check ConditionSecurity=measured-uki
> [ 4.101249] systemd[1]: Starting Create Static Device Nodes in /dev...
> [ 4.103925] systemd[1]: Starting Coldplug All udev Devices...
> [ 4.111251] systemd[1]: Finished Create List of Static Device Nodes.
> [ 4.113857] systemd[1]: Finished Load Kernel Modules.
> [ 4.116352] systemd[1]: Finished Create Static Device Nodes in /dev.
> [ 4.116582] systemd-journald[299]: Collecting audit messages is disabled.
> [ 4.116677] systemd[1]: Reached target Preparation for Local File Systems.
> [ 4.116742] systemd[1]: Reached target Local File Systems.
> [ 4.119671] systemd[1]: Starting Rule-based Manager for Device Events and Files...
> [ 4.151218] systemd[1]: Started Rule-based Manager for Device Events and Files.
> [ 4.184059] systemd[1]: Started Journal Service.
> [ 4.402015] Key type psk registered
> [ 4.412526] ccp 0000:08:00.1: enabling device (0000 -> 0002)
> [ 4.412747] ccp 0000:08:00.1: ccp: unable to access the device: you might be running a broken BIOS.
> [ 4.412846] ccp 0000:08:00.1: psp enabled
> [ 4.422884] nvme nvme0: pci function 0000:01:00.0
> [ 4.434734] nvme nvme0: D3 entry latency set to 10 seconds
> [ 4.440295] nvme nvme0: 24/0/0 default/read/poll queues
> [ 4.443388] nvme0n1: p1 p2 p3
> [ 4.527375] device-mapper: uevent: version 1.0.3
> [ 4.527470] device-mapper: ioctl: 4.50.0-ioctl (2025-04-28) initialised: dm-devel@lists.linux.dev
> [ 15.088615] NET: Registered PF_ALG protocol family
> [ 15.889799] Key type trusted registered
> [ 15.895058] Key type encrypted registered
> [ 15.973539] BTRFS: device fsid dc764ad3-c581-4485-bbb3-09f2be518905 devid 1 transid 148127 /dev/mapper/nvme0n1p3-encrypted (253:0) scanned by mount (657)
> [ 15.973857] BTRFS info (device dm-0): first mount of filesystem dc764ad3-c581-4485-bbb3-09f2be518905
> [ 15.973864] BTRFS info (device dm-0): using xxhash64 checksum algorithm
> [ 15.977639] BTRFS info (device dm-0): enabling ssd optimizations
> [ 15.977643] BTRFS info (device dm-0): enabling free space tree
> [ 16.361462] systemd-journald[299]: Received SIGTERM from PID 1 (systemd).
> [ 16.727201] systemd[1]: systemd 260.1-2-arch running in system mode (+PAM +AUDIT -SELINUX +APPARMOR -IMA +IPE +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 +KMOD +LIBCRYPTSETUP +LIBCRYPTSETUP_PLUGINS +LIBFDISK +PCRE2 +PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +BTF +XKBCOMMON +UTMP +LIBARCHIVE)
> [ 16.727213] systemd[1]: Detected architecture x86-64.
> [ 16.743736] systemd[1]: Hostname set to <einstein>.
> [ 16.863521] systemd[1]: bpf-restrict-fs: LSM BPF program attached
> [ 17.120173] systemd[1]: initrd-switch-root.service: Deactivated successfully.
> [ 17.120358] systemd[1]: Stopped Switch Root.
> [ 17.121770] systemd[1]: systemd-journald.service: Scheduled restart job, restart counter is at 1.
> [ 17.122353] systemd[1]: Created slice Slice /system/dirmngr.
> [ 17.124100] systemd[1]: Created slice Slice /system/getty.
> [ 17.125043] systemd[1]: Created slice Slice /system/gpg-agent.
> [ 17.125911] systemd[1]: Created slice Slice /system/gpg-agent-browser.
> [ 17.126787] systemd[1]: Created slice Slice /system/gpg-agent-extra.
> [ 17.127661] systemd[1]: Created slice Slice /system/gpg-agent-ssh.
> [ 17.128481] systemd[1]: Created slice Slice /system/keyboxd.
> [ 17.129323] systemd[1]: Created slice Slice /system/modprobe.
> [ 17.129973] systemd[1]: Created slice User and Session Slice.
> [ 17.130402] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
> [ 17.130804] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
> [ 17.131340] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
> [ 17.131723] systemd[1]: Expecting device /dev/disk/by-uuid/F664-DB79...
> [ 17.132069] systemd[1]: Expecting device /dev/disk/by-uuid/cbf8e37b-2095-4f42-a709-5a9f72a34610...
> [ 17.132500] systemd[1]: Reached target Login Prompts.
> [ 17.132853] systemd[1]: Reached target Image Downloads.
> [ 17.133192] systemd[1]: Stopped target Switch Root.
> [ 17.133550] systemd[1]: Stopped target Initrd File Systems.
> [ 17.133885] systemd[1]: Stopped target Initrd Root File System.
> [ 17.134224] systemd[1]: Reached target Local Integrity Protected Volumes.
> [ 17.134585] systemd[1]: Reached target Path Units.
> [ 17.134928] systemd[1]: Reached target Remote File Systems.
> [ 17.135253] systemd[1]: Reached target Slice Units.
> [ 17.135597] systemd[1]: Reached target Swaps.
> [ 17.135934] systemd[1]: Reached target Local Verity Protected Volumes.
> [ 17.136363] systemd[1]: Listening on Device-mapper event daemon FIFOs.
> [ 17.136799] systemd[1]: Listening on LVM2 poll daemon socket.
> [ 17.138308] systemd[1]: Listening on Query the User Interactively for a Password.
> [ 17.142016] systemd[1]: Listening on Process Core Dump Socket.
> [ 17.143199] systemd[1]: Listening on Credential Encryption/Decryption.
> [ 17.144727] systemd[1]: Listening on Factory Reset Management.
> [ 17.146407] systemd[1]: Listening on Console Output Muting Service Socket.
> [ 17.146964] systemd[1]: TPM PCR Measurements skipped, unmet condition check ConditionSecurity=measured-uki
> [ 17.146990] systemd[1]: Make TPM PCR Policy skipped, unmet condition check ConditionSecurity=measured-uki
> [ 17.147861] systemd[1]: Listening on Disk Repartitioning Service Socket.
> [ 17.148331] systemd[1]: Listening on udev Control Socket.
> [ 17.148751] systemd[1]: Listening on udev Varlink Socket.
> [ 17.149171] systemd[1]: Listening on User Database Manager Socket.
> [ 17.150875] systemd[1]: Mounting Huge Pages File System...
> [ 17.151955] systemd[1]: Mounting POSIX Message Queue File System...
> [ 17.153145] systemd[1]: Mounting Kernel Debug File System...
> [ 17.154282] systemd[1]: Mounting Kernel Trace File System...
> [ 17.166466] systemd[1]: Mounting Temporary Directory /tmp...
> [ 17.168202] systemd[1]: Starting Create List of Static Device Nodes...
> [ 17.169646] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
> [ 17.170046] systemd[1]: Load Kernel Module configfs skipped, unmet condition check ConditionKernelModuleLoaded=!configfs
> [ 17.170893] systemd[1]: Mounting Kernel Configuration File System...
> [ 17.171371] systemd[1]: Load Kernel Module drm skipped, unmet condition check ConditionKernelModuleLoaded=!drm
> [ 17.171421] systemd[1]: Load Kernel Module fuse skipped, unmet condition check ConditionKernelModuleLoaded=!fuse
> [ 17.172449] systemd[1]: Mounting FUSE Control File System...
> [ 17.172948] systemd[1]: systemd-cryptsetup@nvme0n1p3\x2dencrypted.service: Deactivated successfully.
> [ 17.173014] systemd[1]: Stopped systemd-cryptsetup@nvme0n1p3\x2dencrypted.service.
> [ 17.173603] systemd[1]: systemd-cryptsetup@nvme0n1p3\x2dencrypted.service: Consumed 15.936s CPU time over 12.681s wall clock time, 1G memory peak.
> [ 17.175343] systemd[1]: systemd-fsck-root.service: Deactivated successfully.
> [ 17.175384] systemd[1]: Stopped File System Check on Root Device.
> [ 17.175837] systemd[1]: Clear Stale Hibernate Storage Info skipped, unmet condition check ConditionPathExists=/sys/firmware/efi/efivars/HibernateLocation-8cf2644b-4b0b-428f-9387-6d876050dc67
> [ 17.178179] systemd[1]: Starting Journal Service...
> [ 17.180251] systemd[1]: Starting Load Kernel Modules...
> [ 17.180664] systemd[1]: TPM PCR Machine ID Measurement skipped, unmet condition check ConditionSecurity=measured-uki
> [ 17.181604] systemd[1]: Starting Remount Root and Kernel File Systems...
> [ 17.182006] systemd[1]: Early TPM SRK Setup skipped, unmet condition check ConditionSecurity=measured-uki
> [ 17.182953] systemd[1]: Starting Load udev Rules from Credentials...
> [ 17.184173] systemd[1]: Starting Coldplug All udev Devices...
> [ 17.187295] systemd[1]: Mounted Huge Pages File System.
> [ 17.188334] systemd[1]: Mounted POSIX Message Queue File System.
> [ 17.188800] systemd[1]: Mounted Kernel Debug File System.
> [ 17.189245] systemd[1]: Mounted Kernel Trace File System.
> [ 17.189689] systemd[1]: Mounted Temporary Directory /tmp.
> [ 17.190326] systemd[1]: Finished Create List of Static Device Nodes.
> [ 17.190823] systemd[1]: Mounted Kernel Configuration File System.
> [ 17.191333] systemd[1]: Mounted FUSE Control File System.
> [ 17.192770] systemd[1]: Starting Create Static Device Nodes in /dev gracefully...
> [ 17.199381] i2c_dev: i2c /dev entries driver
> [ 17.200079] systemd[1]: Finished Load Kernel Modules.
> [ 17.232307] systemd[1]: Starting Apply Kernel Variables...
> [ 17.234023] systemd[1]: Finished Load udev Rules from Credentials.
> [ 17.236939] systemd-journald[884]: Collecting audit messages is disabled.
> [ 17.242507] systemd[1]: Started Journal Service.
> [ 17.363524] systemd-journald[884]: Received client request to flush runtime journal.
> [ 18.527504] ACPI Warning: SystemIO range 0x0000000000000B00-0x0000000000000B08 conflicts with OpRegion 0x0000000000000B00-0x0000000000000B0F (\GSA1.SMBI) (20251212/utaddress-204)
> [ 18.527519] ACPI: OSL: Resource conflict; ACPI support missing from driver?
> [ 18.546381] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver
> [ 18.547150] mc: Linux media interface: v0.10
> [ 18.547568] sp5100-tco sp5100-tco: Using 0xfeb00000 for watchdog MMIO address
> [ 18.548916] RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 163840 ms ovfl timer
> [ 18.548922] RAPL PMU: hw unit of domain package 2^-16 Joules
> [ 18.548923] input: PC Speaker as /devices/platform/pcspkr/input/input6
> [ 18.548925] RAPL PMU: hw unit of domain core 2^-16 Joules
> [ 18.550361] sp5100-tco sp5100-tco: initialized. heartbeat=60 sec (nowayout=0)
> [ 18.590878] Bluetooth: Core ver 2.22
> [ 18.590914] NET: Registered PF_BLUETOOTH protocol family
> [ 18.590916] Bluetooth: HCI device and connection manager initialized
> [ 18.590922] Bluetooth: HCI socket layer initialized
> [ 18.590926] Bluetooth: L2CAP socket layer initialized
> [ 18.590936] Bluetooth: SCO socket layer initialized
> [ 18.634002] mousedev: PS/2 mouse device common for all mice
> [ 18.634985] cfg80211: Loading compiled-in X.509 certificates for regulatory database
> [ 18.635175] gigabyte-wmi DEADBEEF-2001-0000-00A0-C90629100000-2: No temperature sensors usable
> [ 18.640505] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
> [ 18.640843] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
> [ 18.655384] videodev: Linux video capture interface: v2.00
> [ 18.663302] r8169 0000:04:00.0 eth0: RTL8125B, 18:c0:4d:d9:84:b5, XID 641, IRQ 85
> [ 18.663308] r8169 0000:04:00.0 eth0: jumbo features [frames: 16362 bytes, tx checksumming: ko]
> [ 18.722710] r8169 0000:04:00.0 eno1: renamed from eth0
> [ 18.735395] iwlwifi 0000:05:00.0: enabling device (0000 -> 0002)
> [ 18.739697] iwlwifi 0000:05:00.0: Detected crf-id 0x3617, cnv-id 0x100530 wfpm id 0x80000000
> [ 18.739708] iwlwifi 0000:05:00.0: PCI dev 2723/0084, rev=0x340, rfid=0x10a100
> [ 18.739712] iwlwifi 0000:05:00.0: Detected Intel(R) Wi-Fi 6 AX200 160MHz
> [ 18.744029] usbcore: registered new interface driver btusb
> [ 18.747448] iwlwifi 0000:05:00.0: loaded firmware version 77.f39cc7f9.0 cc-a0-77.ucode op_mode iwlmvm
> [ 18.752947] kvm_amd: TSC scaling supported
> [ 18.752952] kvm_amd: Nested Virtualization enabled
> [ 18.752956] kvm_amd: Nested Paging enabled
> [ 18.752959] kvm_amd: LBR virtualization supported
> [ 18.752965] kvm_amd: Virtual VMLOAD VMSAVE supported
> [ 18.752967] kvm_amd: Virtual GIF supported
> [ 18.767652] Bluetooth: hci0: Found device firmware: intel/ibt-20-1-3.sfi
> [ 18.767679] Bluetooth: hci0: Boot Address: 0x24800
> [ 18.767683] Bluetooth: hci0: Firmware Version: 255-255.255
> [ 18.772320] usb 1-5: USB disconnect, device number 2
> [ 18.772614] snd_hda_intel 0000:06:00.1: Handle vga_switcheroo audio client
> [ 18.772621] snd_hda_intel 0000:06:00.1: Force to non-snoop mode
> [ 18.772816] snd_hda_intel 0000:08:00.4: enabling device (0000 -> 0002)
> [ 18.772913] Bluetooth: hci0: FW download error recovery failed (-19)
> [ 18.772959] Bluetooth: hci0: sending frame failed (-19)
> [ 18.772972] Bluetooth: hci0: Reading supported features failed (-19)
> [ 18.772976] Bluetooth: hci0: Error reading debug features
> [ 18.772983] Bluetooth: hci0: HCI LE Coded PHY feature bit is set, but its usage is not supported.
> [ 18.772993] Bluetooth: hci0: sending frame failed (-19)
> [ 18.773003] Bluetooth: hci0: Failed to read MSFT supported features (-19)
> [ 18.779647] EDAC MC0: Giving out device to module amd64_edac controller F19h_M21h: DEV 0000:00:18.3 (INTERRUPT)
> [ 18.779653] EDAC amd64: F19h_M21h detected (node 0).
> [ 18.779655] EDAC MC: UMC0 chip selects:
> [ 18.779656] EDAC amd64: MC: 0: 0MB 1: 0MB
> [ 18.779658] EDAC amd64: MC: 2: 16384MB 3: 16384MB
> [ 18.779660] EDAC MC: UMC1 chip selects:
> [ 18.779661] EDAC amd64: MC: 0: 0MB 1: 0MB
> [ 18.779662] EDAC amd64: MC: 2: 16384MB 3: 16384MB
> [ 18.792629] intel_rapl_common: Found RAPL domain package
> [ 18.792634] intel_rapl_common: Found RAPL domain core
> [ 18.793092] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.1/0000:06:00.1/sound/card1/input7
> [ 18.793143] input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.1/0000:06:00.1/sound/card1/input8
> [ 18.793183] input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.1/0000:06:00.1/sound/card1/input9
> [ 18.793224] input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.1/0000:06:00.1/sound/card1/input10
> [ 18.793269] input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.1/0000:06:00.1/sound/card1/input11
> [ 18.793326] input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.1/0000:06:00.1/sound/card1/input12
> [ 18.869294] amd_atl: AMD Address Translation Library initialized
> [ 18.870518] snd_hda_codec_alc882 hdaudioC2D0: autoconfig for ALC1220: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
> [ 18.870549] snd_hda_codec_alc882 hdaudioC2D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
> [ 18.870552] snd_hda_codec_alc882 hdaudioC2D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
> [ 18.870554] snd_hda_codec_alc882 hdaudioC2D0: mono: mono_out=0x0
> [ 18.870555] snd_hda_codec_alc882 hdaudioC2D0: dig-out=0x1e/0x0
> [ 18.870557] snd_hda_codec_alc882 hdaudioC2D0: inputs:
> [ 18.870559] snd_hda_codec_alc882 hdaudioC2D0: Rear Mic=0x18
> [ 18.870561] snd_hda_codec_alc882 hdaudioC2D0: Front Mic=0x19
> [ 18.870562] snd_hda_codec_alc882 hdaudioC2D0: Line=0x1a
> [ 18.876221] pps_core: LinuxPPS API ver. 1 registered
> [ 18.876225] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
> [ 18.882606] PTP clock support registered
> [ 18.884466] input: HD-Audio Generic Rear Mic as /devices/pci0000:00/0000:00:08.1/0000:08:00.4/sound/card2/input13
> [ 18.884549] input: HD-Audio Generic Front Mic as /devices/pci0000:00/0000:00:08.1/0000:08:00.4/sound/card2/input14
> [ 18.884592] input: HD-Audio Generic Line as /devices/pci0000:00/0000:00:08.1/0000:08:00.4/sound/card2/input15
> [ 18.884642] input: HD-Audio Generic Line Out Front as /devices/pci0000:00/0000:00:08.1/0000:08:00.4/sound/card2/input16
> [ 18.884684] input: HD-Audio Generic Line Out Surround as /devices/pci0000:00/0000:00:08.1/0000:08:00.4/sound/card2/input17
> [ 18.884729] input: HD-Audio Generic Line Out CLFE as /devices/pci0000:00/0000:00:08.1/0000:08:00.4/sound/card2/input18
> [ 18.884774] input: HD-Audio Generic Front Headphone as /devices/pci0000:00/0000:00:08.1/0000:08:00.4/sound/card2/input19
> [ 18.942643] usblp 1-6.4:1.0: usblp0: USB Bidirectional printer dev 9 if 0 alt 0 proto 2 vid 0x03F0 pid 0x5B12
> [ 18.942683] usbcore: registered new interface driver usblp
> [ 19.035526] iwlwifi 0000:05:00.0: Detected RF HR B3, rfid=0x10a100
> [ 19.100466] iwlwifi 0000:05:00.0: base HW address: 08:5b:d6:d0:3a:8b
> [ 19.202967] iwlwifi 0000:05:00.0 wlp5s0: renamed from wlan0
> [ 19.217291] usb 1-5: new full-speed USB device number 10 using xhci_hcd
> [ 19.220632] BTRFS: device fsid cbf8e37b-2095-4f42-a709-5a9f72a34610 devid 1 transid 426 /dev/nvme0n1p2 (259:2) scanned by mount (1081)
> [ 19.220937] BTRFS info (device nvme0n1p2): first mount of filesystem cbf8e37b-2095-4f42-a709-5a9f72a34610
> [ 19.220942] BTRFS info (device nvme0n1p2): using xxhash64 checksum algorithm
> [ 19.223998] BTRFS info (device nvme0n1p2): enabling ssd optimizations
> [ 19.224002] BTRFS info (device nvme0n1p2): turning on async discard
> [ 19.224003] BTRFS info (device nvme0n1p2): enabling free space tree
> [ 19.589346] usb 1-5: New USB device found, idVendor=8087, idProduct=0029, bcdDevice= 0.01
> [ 19.589352] usb 1-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
> [ 19.617090] Bluetooth: hci0: Bootloader revision 0.3 build 0 week 24 2017
> [ 19.622101] Bluetooth: hci0: Device revision is 1
> [ 19.622104] Bluetooth: hci0: Secure boot is enabled
> [ 19.622105] Bluetooth: hci0: OTP lock is enabled
> [ 19.622106] Bluetooth: hci0: API lock is enabled
> [ 19.622107] Bluetooth: hci0: Debug lock is disabled
> [ 19.622108] Bluetooth: hci0: Minimum firmware build 1 week 10 2014
> [ 19.626188] Bluetooth: hci0: Found device firmware: intel/ibt-20-1-3.sfi
> [ 19.626223] Bluetooth: hci0: Boot Address: 0x24800
> [ 19.626225] Bluetooth: hci0: Firmware Version: 255-255.255
> [ 20.045278] usb 1-6.1: set resolution quirk: cval->res = 384
> [ 20.045439] usbcore: registered new interface driver snd-usb-audio
> [ 20.045522] uvcvideo 1-6.1:1.0: Found UVC 1.00 device <unnamed> (046d:0825)
> [ 20.353027] usbcore: registered new interface driver uvcvideo
> [ 23.994429] FAT-fs (nvme0n1p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
> [ 24.002708] amdgpu: Virtual CRAT table created for CPU
> [ 24.002730] amdgpu: Topology: Add CPU node
> [ 24.002839] amdgpu 0000:06:00.0: SI support provided by amdgpu.
> Use radeon.si_support=1 amdgpu.si_support=0 to override.
> [ 24.002985] amdgpu 0000:06:00.0: initializing kernel modesetting (PITCAIRN 0x1002:0x6819 0x174B:0xE221 0x00).
> [ 24.003002] amdgpu 0000:06:00.0: register mmio base: 0xFCE00000
> [ 24.003004] amdgpu 0000:06:00.0: register mmio size: 262144
> [ 24.003083] amdgpu 0000:06:00.0: detected ip block number 0 <common_v1_0_0> (si_common)
> [ 24.003087] amdgpu 0000:06:00.0: detected ip block number 1 <gmc_v6_0_0> (gmc_v6_0)
> [ 24.003089] amdgpu 0000:06:00.0: detected ip block number 2 <ih_v1_0_0> (si_ih)
> [ 24.003091] amdgpu 0000:06:00.0: detected ip block number 3 <gfx_v6_0_0> (gfx_v6_0)
> [ 24.003092] amdgpu 0000:06:00.0: detected ip block number 4 <sdma_v1_0_0> (si_dma)
> [ 24.003094] amdgpu 0000:06:00.0: detected ip block number 5 <smu_v6_0_0> (si_dpm)
> [ 24.003096] amdgpu 0000:06:00.0: detected ip block number 6 <dce_v1_0_0> (dm)
> [ 24.003097] amdgpu 0000:06:00.0: detected ip block number 7 <uvd_v3_1_0> (uvd_v3_1)
> [ 24.003099] amdgpu 0000:06:00.0: detected ip block number 8 <vce_v1_0_0> (vce_v1_0)
> [ 24.019306] amdgpu 0000:06:00.0: Fetched VBIOS from ROM BAR
> [ 24.019315] amdgpu 0000:06:00.0: [drm] ATOM BIOS: 113-221PROHE-X02, build: 234026 , ver: 015.022.000.001.000000, 2012/07/18
> [ 24.020745] amdgpu 0000:06:00.0: Found VCE firmware Version: 50.0 Binary ID: 1
> [ 24.020752] kfd kfd: PITCAIRN not supported in kfd
> [ 24.059391] Console: switching to colour dummy device 80x25
> [ 24.059938] amdgpu 0000:06:00.0: vgaarb: deactivate vga console
> [ 24.059943] amdgpu 0000:06:00.0: Trusted Memory Zone (TMZ) feature not supported
> [ 24.060066] amdgpu 0000:06:00.0: [drm] PCIE gen 3 link speeds already enabled
> [ 24.060073] amdgpu 0000:06:00.0: vm size is 256 GB, 2 levels, block size is 10-bit, fragment size is 9-bit
> [ 24.060670] amdgpu 0000:06:00.0: VRAM: 2048M 0x000000F400000000 - 0x000000F47FFFFFFF (2048M used)
> [ 24.060677] amdgpu 0000:06:00.0: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
> [ 24.060686] amdgpu 0000:06:00.0: [drm] Detected VRAM RAM=2048M, BAR=256M
> [ 24.060688] amdgpu 0000:06:00.0: [drm] RAM width 256bits GDDR5
> [ 24.060828] amdgpu 0000:06:00.0: 2048M of VRAM memory ready
> [ 24.060831] amdgpu 0000:06:00.0: 32097M of GTT memory ready.
> [ 24.060846] amdgpu 0000:06:00.0: [drm] GART: num cpu pages 262144, num gpu pages 262144
> [ 24.063708] amdgpu 0000:06:00.0: [drm] PCIE GART of 1024M enabled (table at 0x000000F400800000).
> [ 24.066436] amdgpu 0000:06:00.0: [drm] Internal thermal controller with fan control
> [ 24.066454] amdgpu 0000:06:00.0: [drm] si dpm initialized
> [ 24.068522] amdgpu 0000:06:00.0: [drm] Found UVD firmware Version: 64.0 Family ID: 13
> [ 24.373744] Bluetooth: hci0: Waiting for firmware download to complete
> [ 24.373862] Bluetooth: hci0: Firmware loaded in 4636395 usecs
> [ 24.373926] Bluetooth: hci0: Waiting for device to boot
> [ 24.378955] amdgpu 0000:06:00.0: [drm] Display Core v3.2.378 initialized on DCE 6.0
> [ 24.384600] snd_hda_intel 0000:06:00.1: bound 0000:06:00.0 (ops amdgpu_dm_audio_component_bind_ops [amdgpu])
> [ 24.391029] Bluetooth: hci0: Device booted in 16720 usecs
> [ 24.391310] Bluetooth: hci0: Found Intel DDC parameters: intel/ibt-20-1-3.ddc
> [ 24.399864] Bluetooth: hci0: Applying Intel DDC parameters completed
> [ 24.404866] Bluetooth: hci0: Firmware revision 0.3 build 83 week 7 2026
> [ 24.414877] Bluetooth: hci0: HCI LE Coded PHY feature bit is set, but its usage is not supported.
> [ 24.542206] 8021q: 802.1Q VLAN Support v1.8
> [ 24.630289] Realtek Internal NBASE-T PHY r8169-0-400:00: attached PHY driver (mii_bus:phy_addr=r8169-0-400:00, irq=MAC)
> [ 24.800459] r8169 0000:04:00.0 eno1: Link is Down
> [ 27.036649] r8169 0000:04:00.0 eno1: Link is Up - 1Gbps/Full - flow control rx/tx
> [ 27.646408] [drm:dm_helpers_read_local_edid [amdgpu]] *ERROR* EDID err: 2, on connector: HDMI-A-1
> [ 27.647210] amdgpu 0000:06:00.0: [drm] *ERROR* No EDID read.
> [ 27.868358] amdgpu 0000:06:00.0: [drm] UVD initialized successfully.
> [ 28.150630] amdgpu 0000:06:00.0: VCE initialized successfully.
> [ 28.150985] amdgpu 0000:06:00.0: SE 2, SH per SE 2, CU per SH 5, active_cu_number 16
> [ 28.759102] amdgpu 0000:06:00.0: Runtime PM not available
> [ 28.759618] amdgpu 0000:06:00.0: [drm] Registered 6 planes with drm panic
> [ 28.768282] [drm] Initialized amdgpu 3.64.0 for 0000:06:00.0 on minor 1
> [ 28.770058] amdgpu 0000:06:00.0: [drm] Failed to setup vendor infoframe on connector DVI-I-1: -22
> [ 28.773524] fbcon: amdgpudrmfb (fb0) is primary device
> [ 28.972306] Console: switching to colour frame buffer device 240x67
> [ 29.022234] amdgpu 0000:06:00.0: [drm] fb0: amdgpudrmfb frame buffer device
> [ 30.133450] amdgpu 0000:06:00.0: VCE busy: VCE_STATUS=0x100, SRBM_STATUS2=0x0
> [ 31.003355] usb 1-6.1: reset high-speed USB device number 5 using xhci_hcd
> [ 31.527346] nvme nvme0: using unchecked data buffer
> [ 32.459312] warning: `kdeconnectd' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
next prev parent reply other threads:[~2026-04-29 13:04 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-29 12:34 [REGRESSION] CPU running at fixed frequency (~1.7 GHz) with kernel 7.1-rc1 Viktor Jägersküpper
2026-04-29 13:04 ` Mario Limonciello [this message]
2026-04-29 13:54 ` Viktor Jägersküpper
2026-04-29 14:25 ` Mario Limonciello
2026-04-29 15:38 ` Viktor Jägersküpper
2026-04-29 15:54 ` Mario Limonciello
2026-04-29 16:20 ` Viktor Jägersküpper
2026-04-29 17:14 ` Mario Limonciello
2026-04-29 18:34 ` Viktor Jägersküpper
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=f35244cb-1f17-42a9-9479-5eee196cae5e@amd.com \
--to=mario.limonciello@amd.com \
--cc=linux-pm@vger.kernel.org \
--cc=ray.huang@amd.com \
--cc=regressions@lists.linux.dev \
--cc=viktor_jaegerskuepper@freenet.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox