Re: [PATCH v3 5/5] thermal/drivers/tsens: Add IPQ5332 support

[Praveenkumar I <quic_ipkumar@quicinc.com>]

On 7/15/2023 7:36 PM, Konrad Dybcio wrote:
> On 13.07.2023 07:27, Praveenkumar I wrote:
>> IPQ5332 uses tsens v2.3.3 IP and it is having combined interrupt.
>> It does not have RPM and kernel needs to take care of sensor
>> enablement, calibration. Hence introduced new feature_config,
>> ops and data for IPQ5332.
>>
>> Signed-off-by: Praveenkumar I <quic_ipkumar@quicinc.com>
>> ---
>> [v3]:
>> 	No changes.
>> [v2]:
>> 	Added tsens_features for ipq5332 with VER_2_X_NO_RPM. Used
>> 	hw_ids to mention the available sensors. Dropped v2 in
>> 	ops_ipq5332.
>>
>>   drivers/thermal/qcom/tsens-v2.c | 25 +++++++++++++++++++++++++
>>   drivers/thermal/qcom/tsens.c    |  3 +++
>>   drivers/thermal/qcom/tsens.h    |  2 +-
>>   3 files changed, 29 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/thermal/qcom/tsens-v2.c b/drivers/thermal/qcom/tsens-v2.c
>> index 781595a9a622..e25d9d34e519 100644
>> --- a/drivers/thermal/qcom/tsens-v2.c
>> +++ b/drivers/thermal/qcom/tsens-v2.c
>> @@ -62,6 +62,17 @@ static struct tsens_features ipq8074_feat = {
>>   	.trip_max_temp	= 204000,
>>   };
>>   
>> +static struct tsens_features ipq5332_feat = {
>> +	.ver_major	= VER_2_X_NO_RPM,
>> +	.crit_int	= 1,
>> +	.combo_int	= 1,
>> +	.adc		= 0,
>> +	.srot_split	= 1,
>> +	.max_sensors	= 16,
>> +	.trip_min_temp	= 0,
>> +	.trip_max_temp	= 204000,
> 204 degrees Celcius?
Yes, it is 204 degrees celcius as like ipq8074.
> Konrad
>> +};
>> +
>>   static const struct reg_field tsens_v2_regfields[MAX_REGFIELDS] = {
>>   	/* ----- SROT ------ */
>>   	/* VERSION */
>> @@ -262,6 +273,20 @@ struct tsens_plat_data data_ipq8074 = {
>>   	.fields	= tsens_v2_regfields,
>>   };
>>   
>> +static const struct tsens_ops ops_ipq5332 = {
>> +	.init		= init_tsens_v2_no_rpm,
>> +	.get_temp	= get_temp_tsens_valid,
>> +	.calibrate	= tsens_v2_calibration,
>> +};
>> +
>> +struct tsens_plat_data data_ipq5332 = {
>> +	.num_sensors	= 5,
>> +	.ops		= &ops_ipq5332,
>> +	.hw_ids		= (unsigned int []){11, 12, 13, 14, 15},
>> +	.feat		= &ipq5332_feat,
>> +	.fields		= tsens_v2_regfields,
>> +};
>> +
>>   /* Kept around for backward compatibility with old msm8996.dtsi */
>>   struct tsens_plat_data data_8996 = {
>>   	.num_sensors	= 13,
>> diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c
>> index 9dc0c2150948..af58a94628a8 100644
>> --- a/drivers/thermal/qcom/tsens.c
>> +++ b/drivers/thermal/qcom/tsens.c
>> @@ -1106,6 +1106,9 @@ static const struct of_device_id tsens_table[] = {
>>   	}, {
>>   		.compatible = "qcom,ipq8074-tsens",
>>   		.data = &data_ipq8074,
>> +	}, {
>> +		.compatible = "qcom,ipq5332-tsens",
>> +		.data = &data_ipq5332,
>>   	}, {
>>   		.compatible = "qcom,mdm9607-tsens",
>>   		.data = &data_9607,
>> diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h
>> index b2e8f0f2b466..1dde363914cd 100644
>> --- a/drivers/thermal/qcom/tsens.h
>> +++ b/drivers/thermal/qcom/tsens.h
>> @@ -648,6 +648,6 @@ extern struct tsens_plat_data data_8226, data_8909, data_8916, data_8939, data_8
>>   extern struct tsens_plat_data data_tsens_v1, data_8976, data_8956;
>>   
>>   /* TSENS v2 targets */
>> -extern struct tsens_plat_data data_8996, data_ipq8074, data_tsens_v2;
>> +extern struct tsens_plat_data data_8996, data_ipq8074, data_ipq5332, data_tsens_v2;
>>   
>>   #endif /* __QCOM_TSENS_H__ */