From mboxrd@z Thu Jan  1 00:00:00 1970
From: Auger Eric <eric.auger@redhat.com>
Subject: Re: [PATCH v3] vfio: platform: Fix using devices in PM Domains
Date: Mon, 28 May 2018 22:27:41 +0200
Message-ID: <ff3992c7-1d59-1fec-1393-47e2d278d8c9@redhat.com>
References: <1527521165-29345-1-git-send-email-geert+renesas@glider.be>
Mime-Version: 1.0
Content-Type: text/plain; charset=windows-1252
Content-Transfer-Encoding: 7bit
Return-path: <linux-kernel-owner@vger.kernel.org>
In-Reply-To: <1527521165-29345-1-git-send-email-geert+renesas@glider.be>
Sender: linux-kernel-owner@vger.kernel.org
To: Geert Uytterhoeven <geert+renesas@glider.be>, Alex Williamson <alex.williamson@redhat.com>
Cc: kvm@vger.kernel.org, linux-renesas-soc@vger.kernel.org, linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org
List-Id: linux-pm@vger.kernel.org

Hi Geert,

On 05/28/2018 05:26 PM, Geert Uytterhoeven wrote:
> If a device is part of a PM Domain (e.g. power and/or clock domain), its
> power state is managed using Runtime PM.  Without Runtime PM, the device
> may not be powered up or clocked, causing subtle failures, crashes, or
> system lock-ups when the device is accessed by the guest.
> 
> Fix this by adding Runtime PM support, powering the device when the VFIO
> device is opened by the guest.
> 
> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
> Reviewed-by: Simon Horman <horms+renesas@verge.net.au>
> ---
> v3:
>   - Drop controversial note about unsafeness of exporting fine-grained
>     power management from host to guest,
thanks ;-)

> 
> v2:
>   - Improve wording,
>   - Add Reviewed-by.
> ---
>  drivers/vfio/platform/vfio_platform_common.c | 9 +++++++++
>  1 file changed, 9 insertions(+)
> 
> diff --git a/drivers/vfio/platform/vfio_platform_common.c b/drivers/vfio/platform/vfio_platform_common.c
> index b60bb5326668498c..41f862f055054543 100644
> --- a/drivers/vfio/platform/vfio_platform_common.c
> +++ b/drivers/vfio/platform/vfio_platform_common.c
> @@ -17,6 +17,7 @@
>  #include <linux/iommu.h>
>  #include <linux/module.h>
>  #include <linux/mutex.h>
> +#include <linux/pm_runtime.h>
>  #include <linux/slab.h>
>  #include <linux/types.h>
>  #include <linux/uaccess.h>
> @@ -233,6 +234,8 @@ static void vfio_platform_release(void *device_data)
>  		const char *extra_dbg = NULL;
>  		int ret;
>  
> +		pm_runtime_put(vdev->device);

> +
>  		ret = vfio_platform_call_reset(vdev, &extra_dbg);
While reading the code again, the reset is using the HW. Don't you want
to call the get() before.

Thanks

Eric
>  		if (ret && vdev->reset_required) {
>  			dev_warn(vdev->device, "reset driver is required and reset call failed in release (%d) %s\n",
> @@ -275,6 +278,10 @@ static int vfio_platform_open(void *device_data)
>  				 ret, extra_dbg ? extra_dbg : "");
>  			goto err_rst;
>  		}
> +
> +		ret = pm_runtime_get_sync(vdev->device);
> +		if (ret < 0)
> +			goto err_rst;
>  	}
>  
>  	vdev->refcnt++;
> @@ -690,6 +697,7 @@ int vfio_platform_probe_common(struct vfio_platform_device *vdev,
>  
>  	mutex_init(&vdev->igate);
>  
> +	pm_runtime_enable(vdev->device);
>  	return 0;
>  
>  put_iommu:
> @@ -707,6 +715,7 @@ struct vfio_platform_device *vfio_platform_remove_common(struct device *dev)
>  	vdev = vfio_del_group_dev(dev);
>  
>  	if (vdev) {
> +		pm_runtime_disable(vdev->device);
>  		vfio_platform_put_reset(vdev);
>  		vfio_iommu_group_put(dev->iommu_group, dev);
>  	}
>