* Re: [PATCH v4 1/4] ARM: OMAP4: Remove un-used control module headers and defines.
From: Felipe Balbi @ 2012-07-25 11:06 UTC (permalink / raw)
To: Konstantin Baydarov
Cc: b-cousson, kishon, santosh.shilimkar, tony, paul, balbi,
amit.kucheria, linux-pm, linux-arm-kernel, linux-omap,
amit.kachhap, Eduardo Valentin
In-Reply-To: <500FD2E9.8050408@dev.rtsoft.ru>
[-- Attachment #1: Type: text/plain, Size: 560 bytes --]
Hi,
On Wed, Jul 25, 2012 at 03:05:13PM +0400, Konstantin Baydarov wrote:
> Most of the OMAP4 control module register defines are not used and
> can be removed. Keep only needed defines and move them to common
> control module header just like other OMAP versions.
>
> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
> Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
> Signed-off-by: Konstantin Baydarov <kbaidarov@dev.rtsoft.ru>
Wasn't this one authored by Santosh ?? Where's his From: Santosh
Shilimkar ???
--
balbi
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply
* [PATCH v4 4/4] ARM: DT: Add support to system control module for OMAP4
From: Konstantin Baydarov @ 2012-07-25 11:05 UTC (permalink / raw)
To: b-cousson, kishon, santosh.shilimkar, tony, paul
Cc: balbi, amit.kucheria, linux-pm, linux-arm-kernel, linux-omap,
amit.kachhap, Eduardo Valentin
[-- Attachment #1: Type: text/plain, Size: 848 bytes --]
This patch add device tree entries on OMAP4 based boards
for System Control Module (SCM).
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Konstantin Baydarov <kbaidarov@dev.rtsoft.ru>
---
arch/arm/boot/dts/omap4.dtsi | 10 ++++++++++
1 files changed, 10 insertions(+), 0 deletions(-)
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 04cbbcb..59f83c9 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -295,5 +295,15 @@
interrupt-parent = <&gic>;
ti,hwmods = "dmic";
};
+
+ ctrl_module_core: ctrl_module_core@4A0022C4 {
+ compatible = "ti,omap4-control";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ /* ranges; */
+ ti,hwmods = "ctrl_module_core";
+ reg = <0x4A0022C4 0x4>; /* CONTROL_STATUS register */
+ };
+
};
};
--
1.7.7.6
[-- Attachment #2: Attached Message Part --]
[-- Type: text/plain, Size: 0 bytes --]
^ permalink raw reply related
* [PATCH v4 3/4] OMAP2+: use control module mfd driver in omap_type
From: Konstantin Baydarov @ 2012-07-25 11:05 UTC (permalink / raw)
To: b-cousson, kishon, santosh.shilimkar, tony, paul
Cc: balbi, amit.kucheria, linux-pm, linux-arm-kernel, linux-omap,
amit.kachhap, Eduardo Valentin
[-- Attachment #1: Type: text/plain, Size: 1403 bytes --]
OMAP system control module can be probed early, then
omap_type is safe to use its APIs.
TODO: add support for other omap versions
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Konstantin Baydarov <kbaidarov@dev.rtsoft.ru>
---
arch/arm/mach-omap2/id.c | 11 ++++++-----
1 files changed, 6 insertions(+), 5 deletions(-)
diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c
index 40373db..8018cad 100644
--- a/arch/arm/mach-omap2/id.c
+++ b/arch/arm/mach-omap2/id.c
@@ -18,6 +18,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/io.h>
+#include <linux/mfd/omap_control.h>
#include <asm/cputype.h>
@@ -43,15 +44,15 @@ int omap_type(void)
u32 val = 0;
if (cpu_is_omap24xx()) {
- val = omap_ctrl_readl(OMAP24XX_CONTROL_STATUS);
+ val = omap_control_status_read();
} else if (soc_is_am33xx()) {
- val = omap_ctrl_readl(AM33XX_CONTROL_STATUS);
+ val = omap_control_status_read();
} else if (cpu_is_omap34xx()) {
- val = omap_ctrl_readl(OMAP343X_CONTROL_STATUS);
+ val = omap_control_status_read();
} else if (cpu_is_omap44xx()) {
- val = omap_ctrl_readl(OMAP4_CTRL_MODULE_CORE_STATUS);
+ val = omap_control_status_read();
} else if (soc_is_omap54xx()) {
- val = omap_ctrl_readl(OMAP5XXX_CONTROL_STATUS);
+ val = omap_control_status_read();
val &= OMAP5_DEVICETYPE_MASK;
val >>= 6;
goto out;
--
1.7.7.6
[-- Attachment #2: Attached Message Part --]
[-- Type: text/plain, Size: 0 bytes --]
^ permalink raw reply related
* [PATCH v4 2/4] mfd: omap: control: core system control driver
From: Konstantin Baydarov @ 2012-07-25 11:05 UTC (permalink / raw)
To: b-cousson, kishon, santosh.shilimkar, tony, paul
Cc: balbi, amit.kucheria, linux-pm, linux-arm-kernel, linux-omap,
amit.kachhap, Eduardo Valentin
[-- Attachment #1: Type: text/plain, Size: 10544 bytes --]
This patch introduces a MFD core device driver for
OMAP system control module.
The control module allows software control of
various static modes supported by the device. It is
composed of two control submodules: general control
module and device (padconfiguration) control
module.
Device driver is probed with postcore_initcall.
Control module register CONTROL_STATUS that is needed
by omap_type() is early mapped by postcore_initcall_sync.
Signed-off-by: J Keerthy <j-keerthy@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Konstantin Baydarov <kbaidarov@dev.rtsoft.ru>
---
.../devicetree/bindings/mfd/omap_control.txt | 32 ++++
arch/arm/mach-omap2/Kconfig | 1 +
arch/arm/plat-omap/Kconfig | 4 +
drivers/mfd/Kconfig | 6 +
drivers/mfd/Makefile | 1 +
drivers/mfd/omap-control-core.c | 162 ++++++++++++++++++++
include/linux/mfd/omap_control.h | 35 +++++
7 files changed, 241 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/omap_control.txt
create mode 100644 drivers/mfd/omap-control-core.c
create mode 100644 include/linux/mfd/omap_control.h
diff --git a/Documentation/devicetree/bindings/mfd/omap_control.txt b/Documentation/devicetree/bindings/mfd/omap_control.txt
new file mode 100644
index 0000000..a9dca9e
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/omap_control.txt
@@ -0,0 +1,32 @@
+* Texas Instrument OMAP System Control Module (SCM) bindings
+
+The control module allows software control of various static modes supported by
+the device. The control module controls the settings of various device modules
+through register configuration and internal signals. It also controls the pad
+configuration, pin functional multiplexing, and the routing of internal signals
+(such as PRCM signals or DMA requests) to output pins configured for hardware
+observability.
+
+Required properties:
+- compatible : Should be:
+ - "ti,omap3-control" for OMAP3 support
+ - "ti,omap4-control" for OMAP4 support
+ - "ti,omap5-control" for OMAP5 support
+
+OMAP specific properties:
+- ti,hwmods: Name of the hwmod associated to the control module:
+ Should be "ctrl_module_core";
+
+OMAP CONTROL_STATUS register:
+reg = <0x4A0022C4 0x4>; /* CONTROL_STATUS register */
+
+Examples:
+ctrl_module_core: ctrl_module_core@4A0022C4 {
+ compatible = "ti,omap4-control";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ /* ranges; */
+ ti,hwmods = "ctrl_module_core";
+ reg = <0x4A0022C4 0x4>; /* CONTROL_STATUS register */
+};
+
diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index dd0fbf7..1235576 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -59,6 +59,7 @@ config ARCH_OMAP4
select ARM_ERRATA_720789
select ARCH_HAS_OPP
select PM_RUNTIME if CPU_IDLE
+ select ARCH_HAS_CONTROL_MODULE
select PM_OPP if PM
select USB_ARCH_HAS_EHCI if USB_SUPPORT
select ARM_CPU_SUSPEND if PM
diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig
index dd36eba..2b2c9d8 100644
--- a/arch/arm/plat-omap/Kconfig
+++ b/arch/arm/plat-omap/Kconfig
@@ -5,6 +5,10 @@ menu "TI OMAP Common Features"
config ARCH_OMAP_OTG
bool
+config ARCH_HAS_CONTROL_MODULE
+ bool
+ select MFD_OMAP_CONTROL
+
choice
prompt "OMAP System Type"
default ARCH_OMAP2PLUS
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 92144ed..530ac60 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -823,6 +823,12 @@ config MFD_WL1273_CORE
driver connects the radio-wl1273 V4L2 module and the wl1273
audio codec.
+config MFD_OMAP_CONTROL
+ bool "Texas Instruments OMAP System control module"
+ depends on ARCH_HAS_CONTROL_MODULE
+ help
+ This is the core driver for system control module.
+
config MFD_OMAP_USB_HOST
bool "Support OMAP USBHS core driver"
depends on USB_EHCI_HCD_OMAP || USB_OHCI_HCD_OMAP3
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 75f6ed6..b037443 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -107,6 +107,7 @@ obj-$(CONFIG_MFD_TPS6586X) += tps6586x.o
obj-$(CONFIG_MFD_VX855) += vx855.o
obj-$(CONFIG_MFD_WL1273_CORE) += wl1273-core.o
obj-$(CONFIG_MFD_CS5535) += cs5535-mfd.o
+obj-$(CONFIG_MFD_OMAP_CONTROL) += omap-control-core.o
obj-$(CONFIG_MFD_OMAP_USB_HOST) += omap-usb-host.o
obj-$(CONFIG_MFD_PM8921_CORE) += pm8921-core.o
obj-$(CONFIG_MFD_PM8XXX_IRQ) += pm8xxx-irq.o
diff --git a/drivers/mfd/omap-control-core.c b/drivers/mfd/omap-control-core.c
new file mode 100644
index 0000000..cefbc5a
--- /dev/null
+++ b/drivers/mfd/omap-control-core.c
@@ -0,0 +1,162 @@
+/*
+ * OMAP system control module driver file
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Contacts:
+ * Based on original code written by:
+ * J Keerthy <j-keerthy@ti.com>
+ * Moiz Sonasath <m-sonasath@ti.com>
+ * MFD clean up and re-factoring:
+ * Eduardo Valentin <eduardo.valentin@ti.com>
+ * Konstantin Baydarov <kbaidarov@dev.rtsoft.ru>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/export.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/io.h>
+#include <linux/err.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/omap_control.h>
+
+#include <linux/of.h>
+#include <linux/of_address.h>
+
+void __iomem *omap_control_base;
+unsigned long omap_control_phys_base;
+size_t omap_control_mapsize;
+
+u32 omap_control_status_read(void)
+{
+ return __raw_readl(omap_control_base);
+}
+
+static const struct of_device_id of_omap_control_match[] = {
+ { .compatible = "ti,omap3-control", },
+ { .compatible = "ti,omap4-control", },
+ { .compatible = "ti,omap5-control", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, of_omap_control_match);
+
+/*
+ * Request control module resources
+ */
+static int __devinit omap_control_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct device *dev = &pdev->dev;
+ const char *name;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -ENOMEM;
+
+ if (!res) {
+ dev_err(dev, "invalid resource\n");
+ return -EINVAL;
+ }
+
+ name = res->name ?: dev_name(dev);
+
+ /*
+ * Can't use res->start and resource_size(res) from platform_get_resource,
+ * because omap_device_alloc() overwrites DT resources -
+ * using omap_control_phys_base, omap_control_mapsize instead
+ */
+ if (!devm_request_mem_region(dev, omap_control_phys_base, omap_control_mapsize, name)) {
+ dev_err(dev, "can't request region for resource %pR\n", res);
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+
+static struct platform_driver omap_control_driver = {
+ .probe = omap_control_probe,
+ .driver = {
+ .name = "omap-control-core",
+ .owner = THIS_MODULE,
+ .of_match_table = of_omap_control_match,
+ },
+};
+
+int __init omap_control_of_init(struct device_node *node,
+ struct device_node *parent)
+{
+ struct resource res;
+
+ if (WARN_ON(!node))
+ return -ENODEV;
+
+ if (of_address_to_resource(node, 0, &res)) {
+ WARN(1, "unable to get intc registers\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+void __init of_omap_control_init(const struct of_device_id *matches)
+{
+ struct device_node *np;
+ struct property *pp = 0;
+
+ for_each_matching_node(np, matches) {
+ pp = of_find_property(np, "reg", NULL);
+ if(pp) {
+ omap_control_phys_base = (unsigned long)be32_to_cpup(pp->value);
+ omap_control_mapsize = (size_t)be32_to_cpup( (void*)((char*)pp->value + 4) );
+ /*
+ * Map control module register CONTROL_STATUS register:
+ * omap24xx - OMAP24XX_CONTROL_STATUS
+ * am33xx - AM33XX_CONTROL_STATUS
+ * omap34xx - OMAP343X_CONTROL_STATUS
+ * omap44xx - OMAP4_CTRL_MODULE_CORE_STATUS
+ * omap54xx - OMAP5XXX_CONTROL_STATUS
+ */
+ omap_control_base = ioremap(omap_control_phys_base, omap_control_mapsize);
+ }
+ }
+}
+
+static int __init
+omap_control_early_initcall(void)
+{
+ of_omap_control_init(of_omap_control_match);
+
+ return 0;
+}
+early_initcall(omap_control_early_initcall);
+
+static int __init omap_control_init(void)
+{
+ return platform_driver_register(&omap_control_driver);
+}
+postcore_initcall_sync(omap_control_init);
+
+static void __exit omap_control_exit(void)
+{
+ platform_driver_unregister(&omap_control_driver);
+}
+module_exit(omap_control_exit);
+early_platform_init("early_omap_control", &omap_control_driver);
+
+MODULE_DESCRIPTION("OMAP system control module driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:omap-control-core");
+MODULE_AUTHOR("Texas Instruments Inc.");
diff --git a/include/linux/mfd/omap_control.h b/include/linux/mfd/omap_control.h
new file mode 100644
index 0000000..ee90a38
--- /dev/null
+++ b/include/linux/mfd/omap_control.h
@@ -0,0 +1,35 @@
+/*
+ * OMAP system control module header file
+ *
+ * Copyright (C) 2011-2012 Texas Instruments Incorporated - http://www.ti.com/
+ * Contact:
+ * J Keerthy <j-keerthy@ti.com>
+ * Moiz Sonasath <m-sonasath@ti.com>
+ * Abraham, Kishon Vijay <kishon@ti.com>
+ * Eduardo Valentin <eduardo.valentin@ti.com>
+ * Konstantin Baydarov <kbaidarov@dev.rtsoft.ru>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ */
+
+#ifndef __DRIVERS_OMAP_CONTROL_H
+#define __DRIVERS_OMAP_CONTROL_H
+
+#ifdef CONFIG_MFD_OMAP_CONTROL
+u32 omap_control_status_read(void);
+#else
+static inline u32 omap_control_status_read(void)
+{
+ return 0;
+}
+#endif
+
+#endif /* __DRIVERS_OMAP_CONTROL_H */
--
1.7.7.6
[-- Attachment #2: Attached Message Part --]
[-- Type: text/plain, Size: 0 bytes --]
^ permalink raw reply related
* [PATCH v4 1/4] ARM: OMAP4: Remove un-used control module headers and defines.
From: Konstantin Baydarov @ 2012-07-25 11:05 UTC (permalink / raw)
To: b-cousson, kishon, santosh.shilimkar, tony, paul
Cc: amit.kucheria, balbi, linux-pm, linux-omap, linux-arm-kernel
[-- Attachment #1: Type: text/plain, Size: 105555 bytes --]
Most of the OMAP4 control module register defines are not used and
can be removed. Keep only needed defines and move them to common
control module header just like other OMAP versions.
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Eduardo Valentin <eduardo.valentin@ti.com>
Signed-off-by: Konstantin Baydarov <kbaidarov@dev.rtsoft.ru>
---
arch/arm/mach-omap2/control.h | 48 +-
.../include/mach/ctrl_module_core_44xx.h | 392 ------
.../include/mach/ctrl_module_pad_core_44xx.h | 1409 --------------------
.../include/mach/ctrl_module_pad_wkup_44xx.h | 236 ----
.../include/mach/ctrl_module_wkup_44xx.h | 92 --
5 files changed, 43 insertions(+), 2134 deletions(-)
delete mode 100644 arch/arm/mach-omap2/include/mach/ctrl_module_core_44xx.h
delete mode 100644 arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h
delete mode 100644 arch/arm/mach-omap2/include/mach/ctrl_module_pad_wkup_44xx.h
delete mode 100644 arch/arm/mach-omap2/include/mach/ctrl_module_wkup_44xx.h
diff --git a/arch/arm/mach-omap2/control.h b/arch/arm/mach-omap2/control.h
index b8cdc85..74af9de 100644
--- a/arch/arm/mach-omap2/control.h
+++ b/arch/arm/mach-omap2/control.h
@@ -16,11 +16,6 @@
#ifndef __ARCH_ARM_MACH_OMAP2_CONTROL_H
#define __ARCH_ARM_MACH_OMAP2_CONTROL_H
-#include <mach/ctrl_module_core_44xx.h>
-#include <mach/ctrl_module_wkup_44xx.h>
-#include <mach/ctrl_module_pad_core_44xx.h>
-#include <mach/ctrl_module_pad_wkup_44xx.h>
-
#include <plat/am33xx.h>
#ifndef __ASSEMBLY__
@@ -190,6 +185,46 @@
#define OMAP3630_CONTROL_FUSE_OPP100_VDD2 (OMAP2_CONTROL_GENERAL + 0x012C)
#define OMAP3630_CONTROL_CAMERA_PHY_CTRL (OMAP2_CONTROL_GENERAL + 0x02f0)
+/* OMAP4 IDCODE CONTROL */
+#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_PROD_ID_1 0x0218
+#define OMAP4_CTRL_MODULE_CORE_STATUS 0x02c4
+
+/* OMAP4 DSP_BOOTADDR */
+#define OMAP4_CTRL_MODULE_CORE_DSP_BOOTADDR 0x0304
+
+/* CONTROL_I2C_1 */
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_I2C_1 0x0624
+#define OMAP4_HDMI_DDC_SDA_PULLUPRESX_MASK (1 << 28)
+#define OMAP4_HDMI_DDC_SCL_PULLUPRESX_MASK (1 << 24)
+
+/* DSI CONTROL_DSIPHY */
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY 0x0618
+#define OMAP4_DSI2_LANEENABLE_SHIFT 29
+#define OMAP4_DSI2_LANEENABLE_MASK (0x7 << 29)
+#define OMAP4_DSI1_LANEENABLE_SHIFT 24
+#define OMAP4_DSI1_LANEENABLE_MASK (0x1f << 24)
+#define OMAP4_DSI1_PIPD_SHIFT 19
+#define OMAP4_DSI1_PIPD_MASK (0x1f << 19)
+#define OMAP4_DSI2_PIPD_SHIFT 14
+#define OMAP4_DSI2_PIPD_MASK (0x1f << 14)
+
+/* CONTROL_PBIASLITE */
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_PBIASLITE 0x0600
+#define OMAP4_MMC1_PWRDNZ_MASK (1 << 26)
+#define OMAP4_MMC1_PBIASLITE_VMODE_MASK (1 << 21)
+#define OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK (1 << 22)
+#define OMAP4_MMC1_PBIASLITE_VMODE_ERROR_MASK (1 << 23)
+
+/* CONTROL_MMC1 */
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MMC1 0x0628
+#define OMAP4_SDMMC1_PUSTRENGTH_GRP0_MASK (1 << 31)
+#define OMAP4_SDMMC1_PUSTRENGTH_GRP1_MASK (1 << 30)
+#define OMAP4_SDMMC1_PUSTRENGTH_GRP2_MASK (1 << 29)
+#define OMAP4_SDMMC1_PUSTRENGTH_GRP3_MASK (1 << 28)
+#define OMAP4_SDMMC1_DR0_SPEEDCTRL_MASK (1 << 27)
+#define OMAP4_SDMMC1_DR1_SPEEDCTRL_MASK (1 << 26)
+#define OMAP4_SDMMC1_DR2_SPEEDCTRL_MASK (1 << 25)
+
/* OMAP44xx control efuse offsets */
#define OMAP44XX_CONTROL_FUSE_IVA_OPP50 0x22C
#define OMAP44XX_CONTROL_FUSE_IVA_OPP100 0x22F
@@ -202,6 +237,9 @@
#define OMAP44XX_CONTROL_FUSE_CORE_OPP50 0x254
#define OMAP44XX_CONTROL_FUSE_CORE_OPP100 0x257
+/* OMAP44xx control McBSP padconf */
+#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MCBSPLP 0x061c
+
/* AM35XX only CONTROL_GENERAL register offsets */
#define AM35XX_CONTROL_MSUSPENDMUX_6 (OMAP2_CONTROL_GENERAL + 0x0038)
#define AM35XX_CONTROL_DEVCONF2 (OMAP2_CONTROL_GENERAL + 0x0310)
diff --git a/arch/arm/mach-omap2/include/mach/ctrl_module_core_44xx.h b/arch/arm/mach-omap2/include/mach/ctrl_module_core_44xx.h
deleted file mode 100644
index 0197082..0000000
--- a/arch/arm/mach-omap2/include/mach/ctrl_module_core_44xx.h
+++ /dev/null
@@ -1,392 +0,0 @@
-/*
- * OMAP44xx CTRL_MODULE_CORE registers and bitfields
- *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
- *
- * Benoit Cousson (b-cousson@ti.com)
- * Santosh Shilimkar (santosh.shilimkar@ti.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_CORE_44XX_H
-#define __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_CORE_44XX_H
-
-
-/* Base address */
-#define OMAP4_CTRL_MODULE_CORE 0x4a002000
-
-/* Registers offset */
-#define OMAP4_CTRL_MODULE_CORE_IP_REVISION 0x0000
-#define OMAP4_CTRL_MODULE_CORE_IP_HWINFO 0x0004
-#define OMAP4_CTRL_MODULE_CORE_IP_SYSCONFIG 0x0010
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_DIE_ID_0 0x0200
-#define OMAP4_CTRL_MODULE_CORE_ID_CODE 0x0204
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_DIE_ID_1 0x0208
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_DIE_ID_2 0x020c
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_DIE_ID_3 0x0210
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_PROD_ID_0 0x0214
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_PROD_ID_1 0x0218
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_USB_CONF 0x021c
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_VDD_WKUP 0x0228
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_BGAP 0x0260
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_DPLL_0 0x0264
-#define OMAP4_CTRL_MODULE_CORE_STD_FUSE_OPP_DPLL_1 0x0268
-#define OMAP4_CTRL_MODULE_CORE_STATUS 0x02c4
-#define OMAP4_CTRL_MODULE_CORE_DEV_CONF 0x0300
-#define OMAP4_CTRL_MODULE_CORE_DSP_BOOTADDR 0x0304
-#define OMAP4_CTRL_MODULE_CORE_LDOVBB_IVA_VOLTAGE_CTRL 0x0314
-#define OMAP4_CTRL_MODULE_CORE_LDOVBB_MPU_VOLTAGE_CTRL 0x0318
-#define OMAP4_CTRL_MODULE_CORE_LDOSRAM_IVA_VOLTAGE_CTRL 0x0320
-#define OMAP4_CTRL_MODULE_CORE_LDOSRAM_MPU_VOLTAGE_CTRL 0x0324
-#define OMAP4_CTRL_MODULE_CORE_LDOSRAM_CORE_VOLTAGE_CTRL 0x0328
-#define OMAP4_CTRL_MODULE_CORE_TEMP_SENSOR 0x032c
-#define OMAP4_CTRL_MODULE_CORE_DPLL_NWELL_TRIM_0 0x0330
-#define OMAP4_CTRL_MODULE_CORE_DPLL_NWELL_TRIM_1 0x0334
-#define OMAP4_CTRL_MODULE_CORE_USBOTGHS_CONTROL 0x033c
-#define OMAP4_CTRL_MODULE_CORE_DSS_CONTROL 0x0340
-#define OMAP4_CTRL_MODULE_CORE_HWOBS_CONTROL 0x0350
-#define OMAP4_CTRL_MODULE_CORE_DEBOBS_FINAL_MUX_SEL 0x0400
-#define OMAP4_CTRL_MODULE_CORE_DEBOBS_MMR_MPU 0x0408
-#define OMAP4_CTRL_MODULE_CORE_CONF_SDMA_REQ_SEL0 0x042c
-#define OMAP4_CTRL_MODULE_CORE_CONF_SDMA_REQ_SEL1 0x0430
-#define OMAP4_CTRL_MODULE_CORE_CONF_SDMA_REQ_SEL2 0x0434
-#define OMAP4_CTRL_MODULE_CORE_CONF_SDMA_REQ_SEL3 0x0438
-#define OMAP4_CTRL_MODULE_CORE_CONF_CLK_SEL0 0x0440
-#define OMAP4_CTRL_MODULE_CORE_CONF_CLK_SEL1 0x0444
-#define OMAP4_CTRL_MODULE_CORE_CONF_CLK_SEL2 0x0448
-#define OMAP4_CTRL_MODULE_CORE_CONF_DPLL_FREQLOCK_SEL 0x044c
-#define OMAP4_CTRL_MODULE_CORE_CONF_DPLL_TINITZ_SEL 0x0450
-#define OMAP4_CTRL_MODULE_CORE_CONF_DPLL_PHASELOCK_SEL 0x0454
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_0 0x0480
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_1 0x0484
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_2 0x0488
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_3 0x048c
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_4 0x0490
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_5 0x0494
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_6 0x0498
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_7 0x049c
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_8 0x04a0
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_9 0x04a4
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_10 0x04a8
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_11 0x04ac
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_12 0x04b0
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_13 0x04b4
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_14 0x04b8
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_15 0x04bc
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_16 0x04c0
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_17 0x04c4
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_18 0x04c8
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_19 0x04cc
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_20 0x04d0
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_21 0x04d4
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_22 0x04d8
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_23 0x04dc
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_24 0x04e0
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_25 0x04e4
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_26 0x04e8
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_27 0x04ec
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_28 0x04f0
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_29 0x04f4
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_30 0x04f8
-#define OMAP4_CTRL_MODULE_CORE_CONF_DEBUG_SEL_TST_31 0x04fc
-
-/* Registers shifts and masks */
-
-/* IP_REVISION */
-#define OMAP4_IP_REV_SCHEME_SHIFT 30
-#define OMAP4_IP_REV_SCHEME_MASK (0x3 << 30)
-#define OMAP4_IP_REV_FUNC_SHIFT 16
-#define OMAP4_IP_REV_FUNC_MASK (0xfff << 16)
-#define OMAP4_IP_REV_RTL_SHIFT 11
-#define OMAP4_IP_REV_RTL_MASK (0x1f << 11)
-#define OMAP4_IP_REV_MAJOR_SHIFT 8
-#define OMAP4_IP_REV_MAJOR_MASK (0x7 << 8)
-#define OMAP4_IP_REV_CUSTOM_SHIFT 6
-#define OMAP4_IP_REV_CUSTOM_MASK (0x3 << 6)
-#define OMAP4_IP_REV_MINOR_SHIFT 0
-#define OMAP4_IP_REV_MINOR_MASK (0x3f << 0)
-
-/* IP_HWINFO */
-#define OMAP4_IP_HWINFO_SHIFT 0
-#define OMAP4_IP_HWINFO_MASK (0xffffffff << 0)
-
-/* IP_SYSCONFIG */
-#define OMAP4_IP_SYSCONFIG_IDLEMODE_SHIFT 2
-#define OMAP4_IP_SYSCONFIG_IDLEMODE_MASK (0x3 << 2)
-
-/* STD_FUSE_DIE_ID_0 */
-#define OMAP4_STD_FUSE_DIE_ID_0_SHIFT 0
-#define OMAP4_STD_FUSE_DIE_ID_0_MASK (0xffffffff << 0)
-
-/* ID_CODE */
-#define OMAP4_STD_FUSE_IDCODE_SHIFT 0
-#define OMAP4_STD_FUSE_IDCODE_MASK (0xffffffff << 0)
-
-/* STD_FUSE_DIE_ID_1 */
-#define OMAP4_STD_FUSE_DIE_ID_1_SHIFT 0
-#define OMAP4_STD_FUSE_DIE_ID_1_MASK (0xffffffff << 0)
-
-/* STD_FUSE_DIE_ID_2 */
-#define OMAP4_STD_FUSE_DIE_ID_2_SHIFT 0
-#define OMAP4_STD_FUSE_DIE_ID_2_MASK (0xffffffff << 0)
-
-/* STD_FUSE_DIE_ID_3 */
-#define OMAP4_STD_FUSE_DIE_ID_3_SHIFT 0
-#define OMAP4_STD_FUSE_DIE_ID_3_MASK (0xffffffff << 0)
-
-/* STD_FUSE_PROD_ID_0 */
-#define OMAP4_STD_FUSE_PROD_ID_0_SHIFT 0
-#define OMAP4_STD_FUSE_PROD_ID_0_MASK (0xffffffff << 0)
-
-/* STD_FUSE_PROD_ID_1 */
-#define OMAP4_STD_FUSE_PROD_ID_1_SHIFT 0
-#define OMAP4_STD_FUSE_PROD_ID_1_MASK (0xffffffff << 0)
-
-/* STD_FUSE_USB_CONF */
-#define OMAP4_USB_PROD_ID_SHIFT 16
-#define OMAP4_USB_PROD_ID_MASK (0xffff << 16)
-#define OMAP4_USB_VENDOR_ID_SHIFT 0
-#define OMAP4_USB_VENDOR_ID_MASK (0xffff << 0)
-
-/* STD_FUSE_OPP_VDD_WKUP */
-#define OMAP4_STD_FUSE_OPP_VDD_WKUP_SHIFT 0
-#define OMAP4_STD_FUSE_OPP_VDD_WKUP_MASK (0xffffffff << 0)
-
-/* STD_FUSE_OPP_BGAP */
-#define OMAP4_STD_FUSE_OPP_BGAP_SHIFT 0
-#define OMAP4_STD_FUSE_OPP_BGAP_MASK (0xffffffff << 0)
-
-/* STD_FUSE_OPP_DPLL_0 */
-#define OMAP4_STD_FUSE_OPP_DPLL_0_SHIFT 0
-#define OMAP4_STD_FUSE_OPP_DPLL_0_MASK (0xffffffff << 0)
-
-/* STD_FUSE_OPP_DPLL_1 */
-#define OMAP4_STD_FUSE_OPP_DPLL_1_SHIFT 0
-#define OMAP4_STD_FUSE_OPP_DPLL_1_MASK (0xffffffff << 0)
-
-/* STATUS */
-#define OMAP4_ATTILA_CONF_SHIFT 11
-#define OMAP4_ATTILA_CONF_MASK (0x3 << 11)
-#define OMAP4_DEVICE_TYPE_SHIFT 8
-#define OMAP4_DEVICE_TYPE_MASK (0x7 << 8)
-#define OMAP4_SYS_BOOT_SHIFT 0
-#define OMAP4_SYS_BOOT_MASK (0xff << 0)
-
-/* DEV_CONF */
-#define OMAP4_DEV_CONF_SHIFT 1
-#define OMAP4_DEV_CONF_MASK (0x7fffffff << 1)
-#define OMAP4_USBPHY_PD_SHIFT 0
-#define OMAP4_USBPHY_PD_MASK (1 << 0)
-
-/* LDOVBB_IVA_VOLTAGE_CTRL */
-#define OMAP4_LDOVBBIVA_RBB_MUX_CTRL_SHIFT 26
-#define OMAP4_LDOVBBIVA_RBB_MUX_CTRL_MASK (1 << 26)
-#define OMAP4_LDOVBBIVA_RBB_VSET_IN_SHIFT 21
-#define OMAP4_LDOVBBIVA_RBB_VSET_IN_MASK (0x1f << 21)
-#define OMAP4_LDOVBBIVA_RBB_VSET_OUT_SHIFT 16
-#define OMAP4_LDOVBBIVA_RBB_VSET_OUT_MASK (0x1f << 16)
-#define OMAP4_LDOVBBIVA_FBB_MUX_CTRL_SHIFT 10
-#define OMAP4_LDOVBBIVA_FBB_MUX_CTRL_MASK (1 << 10)
-#define OMAP4_LDOVBBIVA_FBB_VSET_IN_SHIFT 5
-#define OMAP4_LDOVBBIVA_FBB_VSET_IN_MASK (0x1f << 5)
-#define OMAP4_LDOVBBIVA_FBB_VSET_OUT_SHIFT 0
-#define OMAP4_LDOVBBIVA_FBB_VSET_OUT_MASK (0x1f << 0)
-
-/* LDOVBB_MPU_VOLTAGE_CTRL */
-#define OMAP4_LDOVBBMPU_RBB_MUX_CTRL_SHIFT 26
-#define OMAP4_LDOVBBMPU_RBB_MUX_CTRL_MASK (1 << 26)
-#define OMAP4_LDOVBBMPU_RBB_VSET_IN_SHIFT 21
-#define OMAP4_LDOVBBMPU_RBB_VSET_IN_MASK (0x1f << 21)
-#define OMAP4_LDOVBBMPU_RBB_VSET_OUT_SHIFT 16
-#define OMAP4_LDOVBBMPU_RBB_VSET_OUT_MASK (0x1f << 16)
-#define OMAP4_LDOVBBMPU_FBB_MUX_CTRL_SHIFT 10
-#define OMAP4_LDOVBBMPU_FBB_MUX_CTRL_MASK (1 << 10)
-#define OMAP4_LDOVBBMPU_FBB_VSET_IN_SHIFT 5
-#define OMAP4_LDOVBBMPU_FBB_VSET_IN_MASK (0x1f << 5)
-#define OMAP4_LDOVBBMPU_FBB_VSET_OUT_SHIFT 0
-#define OMAP4_LDOVBBMPU_FBB_VSET_OUT_MASK (0x1f << 0)
-
-/* LDOSRAM_IVA_VOLTAGE_CTRL */
-#define OMAP4_LDOSRAMIVA_RETMODE_MUX_CTRL_SHIFT 26
-#define OMAP4_LDOSRAMIVA_RETMODE_MUX_CTRL_MASK (1 << 26)
-#define OMAP4_LDOSRAMIVA_RETMODE_VSET_IN_SHIFT 21
-#define OMAP4_LDOSRAMIVA_RETMODE_VSET_IN_MASK (0x1f << 21)
-#define OMAP4_LDOSRAMIVA_RETMODE_VSET_OUT_SHIFT 16
-#define OMAP4_LDOSRAMIVA_RETMODE_VSET_OUT_MASK (0x1f << 16)
-#define OMAP4_LDOSRAMIVA_ACTMODE_MUX_CTRL_SHIFT 10
-#define OMAP4_LDOSRAMIVA_ACTMODE_MUX_CTRL_MASK (1 << 10)
-#define OMAP4_LDOSRAMIVA_ACTMODE_VSET_IN_SHIFT 5
-#define OMAP4_LDOSRAMIVA_ACTMODE_VSET_IN_MASK (0x1f << 5)
-#define OMAP4_LDOSRAMIVA_ACTMODE_VSET_OUT_SHIFT 0
-#define OMAP4_LDOSRAMIVA_ACTMODE_VSET_OUT_MASK (0x1f << 0)
-
-/* LDOSRAM_MPU_VOLTAGE_CTRL */
-#define OMAP4_LDOSRAMMPU_RETMODE_MUX_CTRL_SHIFT 26
-#define OMAP4_LDOSRAMMPU_RETMODE_MUX_CTRL_MASK (1 << 26)
-#define OMAP4_LDOSRAMMPU_RETMODE_VSET_IN_SHIFT 21
-#define OMAP4_LDOSRAMMPU_RETMODE_VSET_IN_MASK (0x1f << 21)
-#define OMAP4_LDOSRAMMPU_RETMODE_VSET_OUT_SHIFT 16
-#define OMAP4_LDOSRAMMPU_RETMODE_VSET_OUT_MASK (0x1f << 16)
-#define OMAP4_LDOSRAMMPU_ACTMODE_MUX_CTRL_SHIFT 10
-#define OMAP4_LDOSRAMMPU_ACTMODE_MUX_CTRL_MASK (1 << 10)
-#define OMAP4_LDOSRAMMPU_ACTMODE_VSET_IN_SHIFT 5
-#define OMAP4_LDOSRAMMPU_ACTMODE_VSET_IN_MASK (0x1f << 5)
-#define OMAP4_LDOSRAMMPU_ACTMODE_VSET_OUT_SHIFT 0
-#define OMAP4_LDOSRAMMPU_ACTMODE_VSET_OUT_MASK (0x1f << 0)
-
-/* LDOSRAM_CORE_VOLTAGE_CTRL */
-#define OMAP4_LDOSRAMCORE_RETMODE_MUX_CTRL_SHIFT 26
-#define OMAP4_LDOSRAMCORE_RETMODE_MUX_CTRL_MASK (1 << 26)
-#define OMAP4_LDOSRAMCORE_RETMODE_VSET_IN_SHIFT 21
-#define OMAP4_LDOSRAMCORE_RETMODE_VSET_IN_MASK (0x1f << 21)
-#define OMAP4_LDOSRAMCORE_RETMODE_VSET_OUT_SHIFT 16
-#define OMAP4_LDOSRAMCORE_RETMODE_VSET_OUT_MASK (0x1f << 16)
-#define OMAP4_LDOSRAMCORE_ACTMODE_MUX_CTRL_SHIFT 10
-#define OMAP4_LDOSRAMCORE_ACTMODE_MUX_CTRL_MASK (1 << 10)
-#define OMAP4_LDOSRAMCORE_ACTMODE_VSET_IN_SHIFT 5
-#define OMAP4_LDOSRAMCORE_ACTMODE_VSET_IN_MASK (0x1f << 5)
-#define OMAP4_LDOSRAMCORE_ACTMODE_VSET_OUT_SHIFT 0
-#define OMAP4_LDOSRAMCORE_ACTMODE_VSET_OUT_MASK (0x1f << 0)
-
-/* TEMP_SENSOR */
-#define OMAP4_BGAP_TEMPSOFF_SHIFT 12
-#define OMAP4_BGAP_TEMPSOFF_MASK (1 << 12)
-#define OMAP4_BGAP_TSHUT_SHIFT 11
-#define OMAP4_BGAP_TSHUT_MASK (1 << 11)
-#define OMAP4_BGAP_TEMP_SENSOR_CONTCONV_SHIFT 10
-#define OMAP4_BGAP_TEMP_SENSOR_CONTCONV_MASK (1 << 10)
-#define OMAP4_BGAP_TEMP_SENSOR_SOC_SHIFT 9
-#define OMAP4_BGAP_TEMP_SENSOR_SOC_MASK (1 << 9)
-#define OMAP4_BGAP_TEMP_SENSOR_EOCZ_SHIFT 8
-#define OMAP4_BGAP_TEMP_SENSOR_EOCZ_MASK (1 << 8)
-#define OMAP4_BGAP_TEMP_SENSOR_DTEMP_SHIFT 0
-#define OMAP4_BGAP_TEMP_SENSOR_DTEMP_MASK (0xff << 0)
-
-/* DPLL_NWELL_TRIM_0 */
-#define OMAP4_DPLL_ABE_NWELL_TRIM_MUX_CTRL_SHIFT 29
-#define OMAP4_DPLL_ABE_NWELL_TRIM_MUX_CTRL_MASK (1 << 29)
-#define OMAP4_DPLL_ABE_NWELL_TRIM_SHIFT 24
-#define OMAP4_DPLL_ABE_NWELL_TRIM_MASK (0x1f << 24)
-#define OMAP4_DPLL_PER_NWELL_TRIM_MUX_CTRL_SHIFT 23
-#define OMAP4_DPLL_PER_NWELL_TRIM_MUX_CTRL_MASK (1 << 23)
-#define OMAP4_DPLL_PER_NWELL_TRIM_SHIFT 18
-#define OMAP4_DPLL_PER_NWELL_TRIM_MASK (0x1f << 18)
-#define OMAP4_DPLL_CORE_NWELL_TRIM_MUX_CTRL_SHIFT 17
-#define OMAP4_DPLL_CORE_NWELL_TRIM_MUX_CTRL_MASK (1 << 17)
-#define OMAP4_DPLL_CORE_NWELL_TRIM_SHIFT 12
-#define OMAP4_DPLL_CORE_NWELL_TRIM_MASK (0x1f << 12)
-#define OMAP4_DPLL_IVA_NWELL_TRIM_MUX_CTRL_SHIFT 11
-#define OMAP4_DPLL_IVA_NWELL_TRIM_MUX_CTRL_MASK (1 << 11)
-#define OMAP4_DPLL_IVA_NWELL_TRIM_SHIFT 6
-#define OMAP4_DPLL_IVA_NWELL_TRIM_MASK (0x1f << 6)
-#define OMAP4_DPLL_MPU_NWELL_TRIM_MUX_CTRL_SHIFT 5
-#define OMAP4_DPLL_MPU_NWELL_TRIM_MUX_CTRL_MASK (1 << 5)
-#define OMAP4_DPLL_MPU_NWELL_TRIM_SHIFT 0
-#define OMAP4_DPLL_MPU_NWELL_TRIM_MASK (0x1f << 0)
-
-/* DPLL_NWELL_TRIM_1 */
-#define OMAP4_DPLL_UNIPRO_NWELL_TRIM_MUX_CTRL_SHIFT 29
-#define OMAP4_DPLL_UNIPRO_NWELL_TRIM_MUX_CTRL_MASK (1 << 29)
-#define OMAP4_DPLL_UNIPRO_NWELL_TRIM_SHIFT 24
-#define OMAP4_DPLL_UNIPRO_NWELL_TRIM_MASK (0x1f << 24)
-#define OMAP4_DPLL_USB_NWELL_TRIM_MUX_CTRL_SHIFT 23
-#define OMAP4_DPLL_USB_NWELL_TRIM_MUX_CTRL_MASK (1 << 23)
-#define OMAP4_DPLL_USB_NWELL_TRIM_SHIFT 18
-#define OMAP4_DPLL_USB_NWELL_TRIM_MASK (0x1f << 18)
-#define OMAP4_DPLL_HDMI_NWELL_TRIM_MUX_CTRL_SHIFT 17
-#define OMAP4_DPLL_HDMI_NWELL_TRIM_MUX_CTRL_MASK (1 << 17)
-#define OMAP4_DPLL_HDMI_NWELL_TRIM_SHIFT 12
-#define OMAP4_DPLL_HDMI_NWELL_TRIM_MASK (0x1f << 12)
-#define OMAP4_DPLL_DSI2_NWELL_TRIM_MUX_CTRL_SHIFT 11
-#define OMAP4_DPLL_DSI2_NWELL_TRIM_MUX_CTRL_MASK (1 << 11)
-#define OMAP4_DPLL_DSI2_NWELL_TRIM_SHIFT 6
-#define OMAP4_DPLL_DSI2_NWELL_TRIM_MASK (0x1f << 6)
-#define OMAP4_DPLL_DSI1_NWELL_TRIM_MUX_CTRL_SHIFT 5
-#define OMAP4_DPLL_DSI1_NWELL_TRIM_MUX_CTRL_MASK (1 << 5)
-#define OMAP4_DPLL_DSI1_NWELL_TRIM_SHIFT 0
-#define OMAP4_DPLL_DSI1_NWELL_TRIM_MASK (0x1f << 0)
-
-/* USBOTGHS_CONTROL */
-#define OMAP4_DISCHRGVBUS_SHIFT 8
-#define OMAP4_DISCHRGVBUS_MASK (1 << 8)
-#define OMAP4_CHRGVBUS_SHIFT 7
-#define OMAP4_CHRGVBUS_MASK (1 << 7)
-#define OMAP4_DRVVBUS_SHIFT 6
-#define OMAP4_DRVVBUS_MASK (1 << 6)
-#define OMAP4_IDPULLUP_SHIFT 5
-#define OMAP4_IDPULLUP_MASK (1 << 5)
-#define OMAP4_IDDIG_SHIFT 4
-#define OMAP4_IDDIG_MASK (1 << 4)
-#define OMAP4_SESSEND_SHIFT 3
-#define OMAP4_SESSEND_MASK (1 << 3)
-#define OMAP4_VBUSVALID_SHIFT 2
-#define OMAP4_VBUSVALID_MASK (1 << 2)
-#define OMAP4_BVALID_SHIFT 1
-#define OMAP4_BVALID_MASK (1 << 1)
-#define OMAP4_AVALID_SHIFT 0
-#define OMAP4_AVALID_MASK (1 << 0)
-
-/* DSS_CONTROL */
-#define OMAP4_DSS_MUX6_SELECT_SHIFT 0
-#define OMAP4_DSS_MUX6_SELECT_MASK (1 << 0)
-
-/* HWOBS_CONTROL */
-#define OMAP4_HWOBS_CLKDIV_SEL_SHIFT 3
-#define OMAP4_HWOBS_CLKDIV_SEL_MASK (0x1f << 3)
-#define OMAP4_HWOBS_ALL_ZERO_MODE_SHIFT 2
-#define OMAP4_HWOBS_ALL_ZERO_MODE_MASK (1 << 2)
-#define OMAP4_HWOBS_ALL_ONE_MODE_SHIFT 1
-#define OMAP4_HWOBS_ALL_ONE_MODE_MASK (1 << 1)
-#define OMAP4_HWOBS_MACRO_ENABLE_SHIFT 0
-#define OMAP4_HWOBS_MACRO_ENABLE_MASK (1 << 0)
-
-/* DEBOBS_FINAL_MUX_SEL */
-#define OMAP4_SELECT_SHIFT 0
-#define OMAP4_SELECT_MASK (0xffffffff << 0)
-
-/* DEBOBS_MMR_MPU */
-#define OMAP4_SELECT_DEBOBS_MMR_MPU_SHIFT 0
-#define OMAP4_SELECT_DEBOBS_MMR_MPU_MASK (0xf << 0)
-
-/* CONF_SDMA_REQ_SEL0 */
-#define OMAP4_MULT_SHIFT 0
-#define OMAP4_MULT_MASK (0x7f << 0)
-
-/* CONF_CLK_SEL0 */
-#define OMAP4_MULT_CONF_CLK_SEL0_SHIFT 0
-#define OMAP4_MULT_CONF_CLK_SEL0_MASK (0x7 << 0)
-
-/* CONF_CLK_SEL1 */
-#define OMAP4_MULT_CONF_CLK_SEL1_SHIFT 0
-#define OMAP4_MULT_CONF_CLK_SEL1_MASK (0x7 << 0)
-
-/* CONF_CLK_SEL2 */
-#define OMAP4_MULT_CONF_CLK_SEL2_SHIFT 0
-#define OMAP4_MULT_CONF_CLK_SEL2_MASK (0x7 << 0)
-
-/* CONF_DPLL_FREQLOCK_SEL */
-#define OMAP4_MULT_CONF_DPLL_FREQLOCK_SEL_SHIFT 0
-#define OMAP4_MULT_CONF_DPLL_FREQLOCK_SEL_MASK (0x7 << 0)
-
-/* CONF_DPLL_TINITZ_SEL */
-#define OMAP4_MULT_CONF_DPLL_TINITZ_SEL_SHIFT 0
-#define OMAP4_MULT_CONF_DPLL_TINITZ_SEL_MASK (0x7 << 0)
-
-/* CONF_DPLL_PHASELOCK_SEL */
-#define OMAP4_MULT_CONF_DPLL_PHASELOCK_SEL_SHIFT 0
-#define OMAP4_MULT_CONF_DPLL_PHASELOCK_SEL_MASK (0x7 << 0)
-
-/* CONF_DEBUG_SEL_TST_0 */
-#define OMAP4_MODE_SHIFT 0
-#define OMAP4_MODE_MASK (0xf << 0)
-
-#endif
diff --git a/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h b/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h
deleted file mode 100644
index c88420d..0000000
--- a/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h
+++ /dev/null
@@ -1,1409 +0,0 @@
-/*
- * OMAP44xx CTRL_MODULE_PAD_CORE registers and bitfields
- *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
- *
- * Benoit Cousson (b-cousson@ti.com)
- * Santosh Shilimkar (santosh.shilimkar@ti.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_PAD_CORE_44XX_H
-#define __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_PAD_CORE_44XX_H
-
-
-/* Base address */
-#define OMAP4_CTRL_MODULE_PAD_CORE 0x4a100000
-
-/* Registers offset */
-#define OMAP4_CTRL_MODULE_PAD_CORE_IP_REVISION 0x0000
-#define OMAP4_CTRL_MODULE_PAD_CORE_IP_HWINFO 0x0004
-#define OMAP4_CTRL_MODULE_PAD_CORE_IP_SYSCONFIG 0x0010
-#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_0 0x01d8
-#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_1 0x01dc
-#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_2 0x01e0
-#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_3 0x01e4
-#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_4 0x01e8
-#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_5 0x01ec
-#define OMAP4_CTRL_MODULE_PAD_CORE_PADCONF_WAKEUPEVENT_6 0x01f0
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_PADCONF_GLOBAL 0x05a0
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_PADCONF_MODE 0x05a4
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART1IO_PADCONF_0 0x05a8
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART1IO_PADCONF_1 0x05ac
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART2IO_PADCONF_0 0x05b0
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART2IO_PADCONF_1 0x05b4
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART3IO_PADCONF_0 0x05b8
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART3IO_PADCONF_1 0x05bc
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SMART3IO_PADCONF_2 0x05c0
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_USBB_HSIC 0x05c4
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_SLIMBUS 0x05c8
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_PBIASLITE 0x0600
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_I2C_0 0x0604
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_CAMERA_RX 0x0608
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_AVDAC 0x060c
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_HDMI_TX_PHY 0x0610
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MMC2 0x0614
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_DSIPHY 0x0618
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MCBSPLP 0x061c
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_USB2PHYCORE 0x0620
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_I2C_1 0x0624
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_MMC1 0x0628
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_HSI 0x062c
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_USB 0x0630
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_HDQ 0x0634
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO1_0 0x0638
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO1_1 0x063c
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO1_2 0x0640
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO1_3 0x0644
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO2_0 0x0648
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO2_1 0x064c
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO2_2 0x0650
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_LPDDR2IO2_3 0x0654
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_BUS_HOLD 0x0658
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_C2C 0x065c
-#define OMAP4_CTRL_MODULE_PAD_CORE_CORE_CONTROL_SPARE_RW 0x0660
-#define OMAP4_CTRL_MODULE_PAD_CORE_CORE_CONTROL_SPARE_R 0x0664
-#define OMAP4_CTRL_MODULE_PAD_CORE_CORE_CONTROL_SPARE_R_C0 0x0668
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_EFUSE_1 0x0700
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_EFUSE_2 0x0704
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_EFUSE_3 0x0708
-#define OMAP4_CTRL_MODULE_PAD_CORE_CONTROL_EFUSE_4 0x070c
-
-/* Registers shifts and masks */
-
-/* IP_REVISION */
-#define OMAP4_IP_REV_SCHEME_SHIFT 30
-#define OMAP4_IP_REV_SCHEME_MASK (0x3 << 30)
-#define OMAP4_IP_REV_FUNC_SHIFT 16
-#define OMAP4_IP_REV_FUNC_MASK (0xfff << 16)
-#define OMAP4_IP_REV_RTL_SHIFT 11
-#define OMAP4_IP_REV_RTL_MASK (0x1f << 11)
-#define OMAP4_IP_REV_MAJOR_SHIFT 8
-#define OMAP4_IP_REV_MAJOR_MASK (0x7 << 8)
-#define OMAP4_IP_REV_CUSTOM_SHIFT 6
-#define OMAP4_IP_REV_CUSTOM_MASK (0x3 << 6)
-#define OMAP4_IP_REV_MINOR_SHIFT 0
-#define OMAP4_IP_REV_MINOR_MASK (0x3f << 0)
-
-/* IP_HWINFO */
-#define OMAP4_IP_HWINFO_SHIFT 0
-#define OMAP4_IP_HWINFO_MASK (0xffffffff << 0)
-
-/* IP_SYSCONFIG */
-#define OMAP4_IP_SYSCONFIG_IDLEMODE_SHIFT 2
-#define OMAP4_IP_SYSCONFIG_IDLEMODE_MASK (0x3 << 2)
-
-/* PADCONF_WAKEUPEVENT_0 */
-#define OMAP4_GPMC_CLK_DUPLICATEWAKEUPEVENT_SHIFT 31
-#define OMAP4_GPMC_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 31)
-#define OMAP4_GPMC_NWP_DUPLICATEWAKEUPEVENT_SHIFT 30
-#define OMAP4_GPMC_NWP_DUPLICATEWAKEUPEVENT_MASK (1 << 30)
-#define OMAP4_GPMC_NCS3_DUPLICATEWAKEUPEVENT_SHIFT 29
-#define OMAP4_GPMC_NCS3_DUPLICATEWAKEUPEVENT_MASK (1 << 29)
-#define OMAP4_GPMC_NCS2_DUPLICATEWAKEUPEVENT_SHIFT 28
-#define OMAP4_GPMC_NCS2_DUPLICATEWAKEUPEVENT_MASK (1 << 28)
-#define OMAP4_GPMC_NCS1_DUPLICATEWAKEUPEVENT_SHIFT 27
-#define OMAP4_GPMC_NCS1_DUPLICATEWAKEUPEVENT_MASK (1 << 27)
-#define OMAP4_GPMC_NCS0_DUPLICATEWAKEUPEVENT_SHIFT 26
-#define OMAP4_GPMC_NCS0_DUPLICATEWAKEUPEVENT_MASK (1 << 26)
-#define OMAP4_GPMC_A25_DUPLICATEWAKEUPEVENT_SHIFT 25
-#define OMAP4_GPMC_A25_DUPLICATEWAKEUPEVENT_MASK (1 << 25)
-#define OMAP4_GPMC_A24_DUPLICATEWAKEUPEVENT_SHIFT 24
-#define OMAP4_GPMC_A24_DUPLICATEWAKEUPEVENT_MASK (1 << 24)
-#define OMAP4_GPMC_A23_DUPLICATEWAKEUPEVENT_SHIFT 23
-#define OMAP4_GPMC_A23_DUPLICATEWAKEUPEVENT_MASK (1 << 23)
-#define OMAP4_GPMC_A22_DUPLICATEWAKEUPEVENT_SHIFT 22
-#define OMAP4_GPMC_A22_DUPLICATEWAKEUPEVENT_MASK (1 << 22)
-#define OMAP4_GPMC_A21_DUPLICATEWAKEUPEVENT_SHIFT 21
-#define OMAP4_GPMC_A21_DUPLICATEWAKEUPEVENT_MASK (1 << 21)
-#define OMAP4_GPMC_A20_DUPLICATEWAKEUPEVENT_SHIFT 20
-#define OMAP4_GPMC_A20_DUPLICATEWAKEUPEVENT_MASK (1 << 20)
-#define OMAP4_GPMC_A19_DUPLICATEWAKEUPEVENT_SHIFT 19
-#define OMAP4_GPMC_A19_DUPLICATEWAKEUPEVENT_MASK (1 << 19)
-#define OMAP4_GPMC_A18_DUPLICATEWAKEUPEVENT_SHIFT 18
-#define OMAP4_GPMC_A18_DUPLICATEWAKEUPEVENT_MASK (1 << 18)
-#define OMAP4_GPMC_A17_DUPLICATEWAKEUPEVENT_SHIFT 17
-#define OMAP4_GPMC_A17_DUPLICATEWAKEUPEVENT_MASK (1 << 17)
-#define OMAP4_GPMC_A16_DUPLICATEWAKEUPEVENT_SHIFT 16
-#define OMAP4_GPMC_A16_DUPLICATEWAKEUPEVENT_MASK (1 << 16)
-#define OMAP4_GPMC_AD15_DUPLICATEWAKEUPEVENT_SHIFT 15
-#define OMAP4_GPMC_AD15_DUPLICATEWAKEUPEVENT_MASK (1 << 15)
-#define OMAP4_GPMC_AD14_DUPLICATEWAKEUPEVENT_SHIFT 14
-#define OMAP4_GPMC_AD14_DUPLICATEWAKEUPEVENT_MASK (1 << 14)
-#define OMAP4_GPMC_AD13_DUPLICATEWAKEUPEVENT_SHIFT 13
-#define OMAP4_GPMC_AD13_DUPLICATEWAKEUPEVENT_MASK (1 << 13)
-#define OMAP4_GPMC_AD12_DUPLICATEWAKEUPEVENT_SHIFT 12
-#define OMAP4_GPMC_AD12_DUPLICATEWAKEUPEVENT_MASK (1 << 12)
-#define OMAP4_GPMC_AD11_DUPLICATEWAKEUPEVENT_SHIFT 11
-#define OMAP4_GPMC_AD11_DUPLICATEWAKEUPEVENT_MASK (1 << 11)
-#define OMAP4_GPMC_AD10_DUPLICATEWAKEUPEVENT_SHIFT 10
-#define OMAP4_GPMC_AD10_DUPLICATEWAKEUPEVENT_MASK (1 << 10)
-#define OMAP4_GPMC_AD9_DUPLICATEWAKEUPEVENT_SHIFT 9
-#define OMAP4_GPMC_AD9_DUPLICATEWAKEUPEVENT_MASK (1 << 9)
-#define OMAP4_GPMC_AD8_DUPLICATEWAKEUPEVENT_SHIFT 8
-#define OMAP4_GPMC_AD8_DUPLICATEWAKEUPEVENT_MASK (1 << 8)
-#define OMAP4_GPMC_AD7_DUPLICATEWAKEUPEVENT_SHIFT 7
-#define OMAP4_GPMC_AD7_DUPLICATEWAKEUPEVENT_MASK (1 << 7)
-#define OMAP4_GPMC_AD6_DUPLICATEWAKEUPEVENT_SHIFT 6
-#define OMAP4_GPMC_AD6_DUPLICATEWAKEUPEVENT_MASK (1 << 6)
-#define OMAP4_GPMC_AD5_DUPLICATEWAKEUPEVENT_SHIFT 5
-#define OMAP4_GPMC_AD5_DUPLICATEWAKEUPEVENT_MASK (1 << 5)
-#define OMAP4_GPMC_AD4_DUPLICATEWAKEUPEVENT_SHIFT 4
-#define OMAP4_GPMC_AD4_DUPLICATEWAKEUPEVENT_MASK (1 << 4)
-#define OMAP4_GPMC_AD3_DUPLICATEWAKEUPEVENT_SHIFT 3
-#define OMAP4_GPMC_AD3_DUPLICATEWAKEUPEVENT_MASK (1 << 3)
-#define OMAP4_GPMC_AD2_DUPLICATEWAKEUPEVENT_SHIFT 2
-#define OMAP4_GPMC_AD2_DUPLICATEWAKEUPEVENT_MASK (1 << 2)
-#define OMAP4_GPMC_AD1_DUPLICATEWAKEUPEVENT_SHIFT 1
-#define OMAP4_GPMC_AD1_DUPLICATEWAKEUPEVENT_MASK (1 << 1)
-#define OMAP4_GPMC_AD0_DUPLICATEWAKEUPEVENT_SHIFT 0
-#define OMAP4_GPMC_AD0_DUPLICATEWAKEUPEVENT_MASK (1 << 0)
-
-/* PADCONF_WAKEUPEVENT_1 */
-#define OMAP4_CAM_STROBE_DUPLICATEWAKEUPEVENT_SHIFT 31
-#define OMAP4_CAM_STROBE_DUPLICATEWAKEUPEVENT_MASK (1 << 31)
-#define OMAP4_CAM_SHUTTER_DUPLICATEWAKEUPEVENT_SHIFT 30
-#define OMAP4_CAM_SHUTTER_DUPLICATEWAKEUPEVENT_MASK (1 << 30)
-#define OMAP4_CSI22_DY1_DUPLICATEWAKEUPEVENT_SHIFT 29
-#define OMAP4_CSI22_DY1_DUPLICATEWAKEUPEVENT_MASK (1 << 29)
-#define OMAP4_CSI22_DX1_DUPLICATEWAKEUPEVENT_SHIFT 28
-#define OMAP4_CSI22_DX1_DUPLICATEWAKEUPEVENT_MASK (1 << 28)
-#define OMAP4_CSI22_DY0_DUPLICATEWAKEUPEVENT_SHIFT 27
-#define OMAP4_CSI22_DY0_DUPLICATEWAKEUPEVENT_MASK (1 << 27)
-#define OMAP4_CSI22_DX0_DUPLICATEWAKEUPEVENT_SHIFT 26
-#define OMAP4_CSI22_DX0_DUPLICATEWAKEUPEVENT_MASK (1 << 26)
-#define OMAP4_CSI21_DY4_DUPLICATEWAKEUPEVENT_SHIFT 25
-#define OMAP4_CSI21_DY4_DUPLICATEWAKEUPEVENT_MASK (1 << 25)
-#define OMAP4_CSI21_DX4_DUPLICATEWAKEUPEVENT_SHIFT 24
-#define OMAP4_CSI21_DX4_DUPLICATEWAKEUPEVENT_MASK (1 << 24)
-#define OMAP4_CSI21_DY3_DUPLICATEWAKEUPEVENT_SHIFT 23
-#define OMAP4_CSI21_DY3_DUPLICATEWAKEUPEVENT_MASK (1 << 23)
-#define OMAP4_CSI21_DX3_DUPLICATEWAKEUPEVENT_SHIFT 22
-#define OMAP4_CSI21_DX3_DUPLICATEWAKEUPEVENT_MASK (1 << 22)
-#define OMAP4_CSI21_DY2_DUPLICATEWAKEUPEVENT_SHIFT 21
-#define OMAP4_CSI21_DY2_DUPLICATEWAKEUPEVENT_MASK (1 << 21)
-#define OMAP4_CSI21_DX2_DUPLICATEWAKEUPEVENT_SHIFT 20
-#define OMAP4_CSI21_DX2_DUPLICATEWAKEUPEVENT_MASK (1 << 20)
-#define OMAP4_CSI21_DY1_DUPLICATEWAKEUPEVENT_SHIFT 19
-#define OMAP4_CSI21_DY1_DUPLICATEWAKEUPEVENT_MASK (1 << 19)
-#define OMAP4_CSI21_DX1_DUPLICATEWAKEUPEVENT_SHIFT 18
-#define OMAP4_CSI21_DX1_DUPLICATEWAKEUPEVENT_MASK (1 << 18)
-#define OMAP4_CSI21_DY0_DUPLICATEWAKEUPEVENT_SHIFT 17
-#define OMAP4_CSI21_DY0_DUPLICATEWAKEUPEVENT_MASK (1 << 17)
-#define OMAP4_CSI21_DX0_DUPLICATEWAKEUPEVENT_SHIFT 16
-#define OMAP4_CSI21_DX0_DUPLICATEWAKEUPEVENT_MASK (1 << 16)
-#define OMAP4_HDMI_DDC_SDA_DUPLICATEWAKEUPEVENT_SHIFT 15
-#define OMAP4_HDMI_DDC_SDA_DUPLICATEWAKEUPEVENT_MASK (1 << 15)
-#define OMAP4_HDMI_DDC_SCL_DUPLICATEWAKEUPEVENT_SHIFT 14
-#define OMAP4_HDMI_DDC_SCL_DUPLICATEWAKEUPEVENT_MASK (1 << 14)
-#define OMAP4_HDMI_CEC_DUPLICATEWAKEUPEVENT_SHIFT 13
-#define OMAP4_HDMI_CEC_DUPLICATEWAKEUPEVENT_MASK (1 << 13)
-#define OMAP4_HDMI_HPD_DUPLICATEWAKEUPEVENT_SHIFT 12
-#define OMAP4_HDMI_HPD_DUPLICATEWAKEUPEVENT_MASK (1 << 12)
-#define OMAP4_C2C_DATA15_DUPLICATEWAKEUPEVENT_SHIFT 11
-#define OMAP4_C2C_DATA15_DUPLICATEWAKEUPEVENT_MASK (1 << 11)
-#define OMAP4_C2C_DATA14_DUPLICATEWAKEUPEVENT_SHIFT 10
-#define OMAP4_C2C_DATA14_DUPLICATEWAKEUPEVENT_MASK (1 << 10)
-#define OMAP4_C2C_DATA13_DUPLICATEWAKEUPEVENT_SHIFT 9
-#define OMAP4_C2C_DATA13_DUPLICATEWAKEUPEVENT_MASK (1 << 9)
-#define OMAP4_C2C_DATA12_DUPLICATEWAKEUPEVENT_SHIFT 8
-#define OMAP4_C2C_DATA12_DUPLICATEWAKEUPEVENT_MASK (1 << 8)
-#define OMAP4_C2C_DATA11_DUPLICATEWAKEUPEVENT_SHIFT 7
-#define OMAP4_C2C_DATA11_DUPLICATEWAKEUPEVENT_MASK (1 << 7)
-#define OMAP4_GPMC_WAIT1_DUPLICATEWAKEUPEVENT_SHIFT 6
-#define OMAP4_GPMC_WAIT1_DUPLICATEWAKEUPEVENT_MASK (1 << 6)
-#define OMAP4_GPMC_WAIT0_DUPLICATEWAKEUPEVENT_SHIFT 5
-#define OMAP4_GPMC_WAIT0_DUPLICATEWAKEUPEVENT_MASK (1 << 5)
-#define OMAP4_GPMC_NBE1_DUPLICATEWAKEUPEVENT_SHIFT 4
-#define OMAP4_GPMC_NBE1_DUPLICATEWAKEUPEVENT_MASK (1 << 4)
-#define OMAP4_GPMC_NBE0_CLE_DUPLICATEWAKEUPEVENT_SHIFT 3
-#define OMAP4_GPMC_NBE0_CLE_DUPLICATEWAKEUPEVENT_MASK (1 << 3)
-#define OMAP4_GPMC_NWE_DUPLICATEWAKEUPEVENT_SHIFT 2
-#define OMAP4_GPMC_NWE_DUPLICATEWAKEUPEVENT_MASK (1 << 2)
-#define OMAP4_GPMC_NOE_DUPLICATEWAKEUPEVENT_SHIFT 1
-#define OMAP4_GPMC_NOE_DUPLICATEWAKEUPEVENT_MASK (1 << 1)
-#define OMAP4_GPMC_NADV_ALE_DUPLICATEWAKEUPEVENT_SHIFT 0
-#define OMAP4_GPMC_NADV_ALE_DUPLICATEWAKEUPEVENT_MASK (1 << 0)
-
-/* PADCONF_WAKEUPEVENT_2 */
-#define OMAP4_ABE_MCBSP1_CLKX_DUPLICATEWAKEUPEVENT_SHIFT 31
-#define OMAP4_ABE_MCBSP1_CLKX_DUPLICATEWAKEUPEVENT_MASK (1 << 31)
-#define OMAP4_ABE_MCBSP2_FSX_DUPLICATEWAKEUPEVENT_SHIFT 30
-#define OMAP4_ABE_MCBSP2_FSX_DUPLICATEWAKEUPEVENT_MASK (1 << 30)
-#define OMAP4_ABE_MCBSP2_DX_DUPLICATEWAKEUPEVENT_SHIFT 29
-#define OMAP4_ABE_MCBSP2_DX_DUPLICATEWAKEUPEVENT_MASK (1 << 29)
-#define OMAP4_ABE_MCBSP2_DR_DUPLICATEWAKEUPEVENT_SHIFT 28
-#define OMAP4_ABE_MCBSP2_DR_DUPLICATEWAKEUPEVENT_MASK (1 << 28)
-#define OMAP4_ABE_MCBSP2_CLKX_DUPLICATEWAKEUPEVENT_SHIFT 27
-#define OMAP4_ABE_MCBSP2_CLKX_DUPLICATEWAKEUPEVENT_MASK (1 << 27)
-#define OMAP4_SDMMC1_DAT7_DUPLICATEWAKEUPEVENT_SHIFT 26
-#define OMAP4_SDMMC1_DAT7_DUPLICATEWAKEUPEVENT_MASK (1 << 26)
-#define OMAP4_SDMMC1_DAT6_DUPLICATEWAKEUPEVENT_SHIFT 25
-#define OMAP4_SDMMC1_DAT6_DUPLICATEWAKEUPEVENT_MASK (1 << 25)
-#define OMAP4_SDMMC1_DAT5_DUPLICATEWAKEUPEVENT_SHIFT 24
-#define OMAP4_SDMMC1_DAT5_DUPLICATEWAKEUPEVENT_MASK (1 << 24)
-#define OMAP4_SDMMC1_DAT4_DUPLICATEWAKEUPEVENT_SHIFT 23
-#define OMAP4_SDMMC1_DAT4_DUPLICATEWAKEUPEVENT_MASK (1 << 23)
-#define OMAP4_SDMMC1_DAT3_DUPLICATEWAKEUPEVENT_SHIFT 22
-#define OMAP4_SDMMC1_DAT3_DUPLICATEWAKEUPEVENT_MASK (1 << 22)
-#define OMAP4_SDMMC1_DAT2_DUPLICATEWAKEUPEVENT_SHIFT 21
-#define OMAP4_SDMMC1_DAT2_DUPLICATEWAKEUPEVENT_MASK (1 << 21)
-#define OMAP4_SDMMC1_DAT1_DUPLICATEWAKEUPEVENT_SHIFT 20
-#define OMAP4_SDMMC1_DAT1_DUPLICATEWAKEUPEVENT_MASK (1 << 20)
-#define OMAP4_SDMMC1_DAT0_DUPLICATEWAKEUPEVENT_SHIFT 19
-#define OMAP4_SDMMC1_DAT0_DUPLICATEWAKEUPEVENT_MASK (1 << 19)
-#define OMAP4_SDMMC1_CMD_DUPLICATEWAKEUPEVENT_SHIFT 18
-#define OMAP4_SDMMC1_CMD_DUPLICATEWAKEUPEVENT_MASK (1 << 18)
-#define OMAP4_SDMMC1_CLK_DUPLICATEWAKEUPEVENT_SHIFT 17
-#define OMAP4_SDMMC1_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 17)
-#define OMAP4_USBC1_ICUSB_DM_DUPLICATEWAKEUPEVENT_SHIFT 16
-#define OMAP4_USBC1_ICUSB_DM_DUPLICATEWAKEUPEVENT_MASK (1 << 16)
-#define OMAP4_USBC1_ICUSB_DP_DUPLICATEWAKEUPEVENT_SHIFT 15
-#define OMAP4_USBC1_ICUSB_DP_DUPLICATEWAKEUPEVENT_MASK (1 << 15)
-#define OMAP4_USBB1_HSIC_STROBE_DUPLICATEWAKEUPEVENT_SHIFT 14
-#define OMAP4_USBB1_HSIC_STROBE_DUPLICATEWAKEUPEVENT_MASK (1 << 14)
-#define OMAP4_USBB1_HSIC_DATA_DUPLICATEWAKEUPEVENT_SHIFT 13
-#define OMAP4_USBB1_HSIC_DATA_DUPLICATEWAKEUPEVENT_MASK (1 << 13)
-#define OMAP4_USBB1_ULPITLL_DAT7_DUPLICATEWAKEUPEVENT_SHIFT 12
-#define OMAP4_USBB1_ULPITLL_DAT7_DUPLICATEWAKEUPEVENT_MASK (1 << 12)
-#define OMAP4_USBB1_ULPITLL_DAT6_DUPLICATEWAKEUPEVENT_SHIFT 11
-#define OMAP4_USBB1_ULPITLL_DAT6_DUPLICATEWAKEUPEVENT_MASK (1 << 11)
-#define OMAP4_USBB1_ULPITLL_DAT5_DUPLICATEWAKEUPEVENT_SHIFT 10
-#define OMAP4_USBB1_ULPITLL_DAT5_DUPLICATEWAKEUPEVENT_MASK (1 << 10)
-#define OMAP4_USBB1_ULPITLL_DAT4_DUPLICATEWAKEUPEVENT_SHIFT 9
-#define OMAP4_USBB1_ULPITLL_DAT4_DUPLICATEWAKEUPEVENT_MASK (1 << 9)
-#define OMAP4_USBB1_ULPITLL_DAT3_DUPLICATEWAKEUPEVENT_SHIFT 8
-#define OMAP4_USBB1_ULPITLL_DAT3_DUPLICATEWAKEUPEVENT_MASK (1 << 8)
-#define OMAP4_USBB1_ULPITLL_DAT2_DUPLICATEWAKEUPEVENT_SHIFT 7
-#define OMAP4_USBB1_ULPITLL_DAT2_DUPLICATEWAKEUPEVENT_MASK (1 << 7)
-#define OMAP4_USBB1_ULPITLL_DAT1_DUPLICATEWAKEUPEVENT_SHIFT 6
-#define OMAP4_USBB1_ULPITLL_DAT1_DUPLICATEWAKEUPEVENT_MASK (1 << 6)
-#define OMAP4_USBB1_ULPITLL_DAT0_DUPLICATEWAKEUPEVENT_SHIFT 5
-#define OMAP4_USBB1_ULPITLL_DAT0_DUPLICATEWAKEUPEVENT_MASK (1 << 5)
-#define OMAP4_USBB1_ULPITLL_NXT_DUPLICATEWAKEUPEVENT_SHIFT 4
-#define OMAP4_USBB1_ULPITLL_NXT_DUPLICATEWAKEUPEVENT_MASK (1 << 4)
-#define OMAP4_USBB1_ULPITLL_DIR_DUPLICATEWAKEUPEVENT_SHIFT 3
-#define OMAP4_USBB1_ULPITLL_DIR_DUPLICATEWAKEUPEVENT_MASK (1 << 3)
-#define OMAP4_USBB1_ULPITLL_STP_DUPLICATEWAKEUPEVENT_SHIFT 2
-#define OMAP4_USBB1_ULPITLL_STP_DUPLICATEWAKEUPEVENT_MASK (1 << 2)
-#define OMAP4_USBB1_ULPITLL_CLK_DUPLICATEWAKEUPEVENT_SHIFT 1
-#define OMAP4_USBB1_ULPITLL_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 1)
-#define OMAP4_CAM_GLOBALRESET_DUPLICATEWAKEUPEVENT_SHIFT 0
-#define OMAP4_CAM_GLOBALRESET_DUPLICATEWAKEUPEVENT_MASK (1 << 0)
-
-/* PADCONF_WAKEUPEVENT_3 */
-#define OMAP4_MCSPI1_CS3_DUPLICATEWAKEUPEVENT_SHIFT 31
-#define OMAP4_MCSPI1_CS3_DUPLICATEWAKEUPEVENT_MASK (1 << 31)
-#define OMAP4_MCSPI1_CS2_DUPLICATEWAKEUPEVENT_SHIFT 30
-#define OMAP4_MCSPI1_CS2_DUPLICATEWAKEUPEVENT_MASK (1 << 30)
-#define OMAP4_MCSPI1_CS1_DUPLICATEWAKEUPEVENT_SHIFT 29
-#define OMAP4_MCSPI1_CS1_DUPLICATEWAKEUPEVENT_MASK (1 << 29)
-#define OMAP4_MCSPI1_CS0_DUPLICATEWAKEUPEVENT_SHIFT 28
-#define OMAP4_MCSPI1_CS0_DUPLICATEWAKEUPEVENT_MASK (1 << 28)
-#define OMAP4_MCSPI1_SIMO_DUPLICATEWAKEUPEVENT_SHIFT 27
-#define OMAP4_MCSPI1_SIMO_DUPLICATEWAKEUPEVENT_MASK (1 << 27)
-#define OMAP4_MCSPI1_SOMI_DUPLICATEWAKEUPEVENT_SHIFT 26
-#define OMAP4_MCSPI1_SOMI_DUPLICATEWAKEUPEVENT_MASK (1 << 26)
-#define OMAP4_MCSPI1_CLK_DUPLICATEWAKEUPEVENT_SHIFT 25
-#define OMAP4_MCSPI1_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 25)
-#define OMAP4_I2C4_SDA_DUPLICATEWAKEUPEVENT_SHIFT 24
-#define OMAP4_I2C4_SDA_DUPLICATEWAKEUPEVENT_MASK (1 << 24)
-#define OMAP4_I2C4_SCL_DUPLICATEWAKEUPEVENT_SHIFT 23
-#define OMAP4_I2C4_SCL_DUPLICATEWAKEUPEVENT_MASK (1 << 23)
-#define OMAP4_I2C3_SDA_DUPLICATEWAKEUPEVENT_SHIFT 22
-#define OMAP4_I2C3_SDA_DUPLICATEWAKEUPEVENT_MASK (1 << 22)
-#define OMAP4_I2C3_SCL_DUPLICATEWAKEUPEVENT_SHIFT 21
-#define OMAP4_I2C3_SCL_DUPLICATEWAKEUPEVENT_MASK (1 << 21)
-#define OMAP4_I2C2_SDA_DUPLICATEWAKEUPEVENT_SHIFT 20
-#define OMAP4_I2C2_SDA_DUPLICATEWAKEUPEVENT_MASK (1 << 20)
-#define OMAP4_I2C2_SCL_DUPLICATEWAKEUPEVENT_SHIFT 19
-#define OMAP4_I2C2_SCL_DUPLICATEWAKEUPEVENT_MASK (1 << 19)
-#define OMAP4_I2C1_SDA_DUPLICATEWAKEUPEVENT_SHIFT 18
-#define OMAP4_I2C1_SDA_DUPLICATEWAKEUPEVENT_MASK (1 << 18)
-#define OMAP4_I2C1_SCL_DUPLICATEWAKEUPEVENT_SHIFT 17
-#define OMAP4_I2C1_SCL_DUPLICATEWAKEUPEVENT_MASK (1 << 17)
-#define OMAP4_HDQ_SIO_DUPLICATEWAKEUPEVENT_SHIFT 16
-#define OMAP4_HDQ_SIO_DUPLICATEWAKEUPEVENT_MASK (1 << 16)
-#define OMAP4_UART2_TX_DUPLICATEWAKEUPEVENT_SHIFT 15
-#define OMAP4_UART2_TX_DUPLICATEWAKEUPEVENT_MASK (1 << 15)
-#define OMAP4_UART2_RX_DUPLICATEWAKEUPEVENT_SHIFT 14
-#define OMAP4_UART2_RX_DUPLICATEWAKEUPEVENT_MASK (1 << 14)
-#define OMAP4_UART2_RTS_DUPLICATEWAKEUPEVENT_SHIFT 13
-#define OMAP4_UART2_RTS_DUPLICATEWAKEUPEVENT_MASK (1 << 13)
-#define OMAP4_UART2_CTS_DUPLICATEWAKEUPEVENT_SHIFT 12
-#define OMAP4_UART2_CTS_DUPLICATEWAKEUPEVENT_MASK (1 << 12)
-#define OMAP4_ABE_DMIC_DIN3_DUPLICATEWAKEUPEVENT_SHIFT 11
-#define OMAP4_ABE_DMIC_DIN3_DUPLICATEWAKEUPEVENT_MASK (1 << 11)
-#define OMAP4_ABE_DMIC_DIN2_DUPLICATEWAKEUPEVENT_SHIFT 10
-#define OMAP4_ABE_DMIC_DIN2_DUPLICATEWAKEUPEVENT_MASK (1 << 10)
-#define OMAP4_ABE_DMIC_DIN1_DUPLICATEWAKEUPEVENT_SHIFT 9
-#define OMAP4_ABE_DMIC_DIN1_DUPLICATEWAKEUPEVENT_MASK (1 << 9)
-#define OMAP4_ABE_DMIC_CLK1_DUPLICATEWAKEUPEVENT_SHIFT 8
-#define OMAP4_ABE_DMIC_CLK1_DUPLICATEWAKEUPEVENT_MASK (1 << 8)
-#define OMAP4_ABE_CLKS_DUPLICATEWAKEUPEVENT_SHIFT 7
-#define OMAP4_ABE_CLKS_DUPLICATEWAKEUPEVENT_MASK (1 << 7)
-#define OMAP4_ABE_PDM_LB_CLK_DUPLICATEWAKEUPEVENT_SHIFT 6
-#define OMAP4_ABE_PDM_LB_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 6)
-#define OMAP4_ABE_PDM_FRAME_DUPLICATEWAKEUPEVENT_SHIFT 5
-#define OMAP4_ABE_PDM_FRAME_DUPLICATEWAKEUPEVENT_MASK (1 << 5)
-#define OMAP4_ABE_PDM_DL_DATA_DUPLICATEWAKEUPEVENT_SHIFT 4
-#define OMAP4_ABE_PDM_DL_DATA_DUPLICATEWAKEUPEVENT_MASK (1 << 4)
-#define OMAP4_ABE_PDM_UL_DATA_DUPLICATEWAKEUPEVENT_SHIFT 3
-#define OMAP4_ABE_PDM_UL_DATA_DUPLICATEWAKEUPEVENT_MASK (1 << 3)
-#define OMAP4_ABE_MCBSP1_FSX_DUPLICATEWAKEUPEVENT_SHIFT 2
-#define OMAP4_ABE_MCBSP1_FSX_DUPLICATEWAKEUPEVENT_MASK (1 << 2)
-#define OMAP4_ABE_MCBSP1_DX_DUPLICATEWAKEUPEVENT_SHIFT 1
-#define OMAP4_ABE_MCBSP1_DX_DUPLICATEWAKEUPEVENT_MASK (1 << 1)
-#define OMAP4_ABE_MCBSP1_DR_DUPLICATEWAKEUPEVENT_SHIFT 0
-#define OMAP4_ABE_MCBSP1_DR_DUPLICATEWAKEUPEVENT_MASK (1 << 0)
-
-/* PADCONF_WAKEUPEVENT_4 */
-#define OMAP4_UNIPRO_TY0_DUPLICATEWAKEUPEVENT_SHIFT 31
-#define OMAP4_UNIPRO_TY0_DUPLICATEWAKEUPEVENT_MASK (1 << 31)
-#define OMAP4_UNIPRO_TX0_DUPLICATEWAKEUPEVENT_SHIFT 30
-#define OMAP4_UNIPRO_TX0_DUPLICATEWAKEUPEVENT_MASK (1 << 30)
-#define OMAP4_USBB2_HSIC_STROBE_DUPLICATEWAKEUPEVENT_SHIFT 29
-#define OMAP4_USBB2_HSIC_STROBE_DUPLICATEWAKEUPEVENT_MASK (1 << 29)
-#define OMAP4_USBB2_HSIC_DATA_DUPLICATEWAKEUPEVENT_SHIFT 28
-#define OMAP4_USBB2_HSIC_DATA_DUPLICATEWAKEUPEVENT_MASK (1 << 28)
-#define OMAP4_USBB2_ULPITLL_DAT7_DUPLICATEWAKEUPEVENT_SHIFT 27
-#define OMAP4_USBB2_ULPITLL_DAT7_DUPLICATEWAKEUPEVENT_MASK (1 << 27)
-#define OMAP4_USBB2_ULPITLL_DAT6_DUPLICATEWAKEUPEVENT_SHIFT 26
-#define OMAP4_USBB2_ULPITLL_DAT6_DUPLICATEWAKEUPEVENT_MASK (1 << 26)
-#define OMAP4_USBB2_ULPITLL_DAT5_DUPLICATEWAKEUPEVENT_SHIFT 25
-#define OMAP4_USBB2_ULPITLL_DAT5_DUPLICATEWAKEUPEVENT_MASK (1 << 25)
-#define OMAP4_USBB2_ULPITLL_DAT4_DUPLICATEWAKEUPEVENT_SHIFT 24
-#define OMAP4_USBB2_ULPITLL_DAT4_DUPLICATEWAKEUPEVENT_MASK (1 << 24)
-#define OMAP4_USBB2_ULPITLL_DAT3_DUPLICATEWAKEUPEVENT_SHIFT 23
-#define OMAP4_USBB2_ULPITLL_DAT3_DUPLICATEWAKEUPEVENT_MASK (1 << 23)
-#define OMAP4_USBB2_ULPITLL_DAT2_DUPLICATEWAKEUPEVENT_SHIFT 22
-#define OMAP4_USBB2_ULPITLL_DAT2_DUPLICATEWAKEUPEVENT_MASK (1 << 22)
-#define OMAP4_USBB2_ULPITLL_DAT1_DUPLICATEWAKEUPEVENT_SHIFT 21
-#define OMAP4_USBB2_ULPITLL_DAT1_DUPLICATEWAKEUPEVENT_MASK (1 << 21)
-#define OMAP4_USBB2_ULPITLL_DAT0_DUPLICATEWAKEUPEVENT_SHIFT 20
-#define OMAP4_USBB2_ULPITLL_DAT0_DUPLICATEWAKEUPEVENT_MASK (1 << 20)
-#define OMAP4_USBB2_ULPITLL_NXT_DUPLICATEWAKEUPEVENT_SHIFT 19
-#define OMAP4_USBB2_ULPITLL_NXT_DUPLICATEWAKEUPEVENT_MASK (1 << 19)
-#define OMAP4_USBB2_ULPITLL_DIR_DUPLICATEWAKEUPEVENT_SHIFT 18
-#define OMAP4_USBB2_ULPITLL_DIR_DUPLICATEWAKEUPEVENT_MASK (1 << 18)
-#define OMAP4_USBB2_ULPITLL_STP_DUPLICATEWAKEUPEVENT_SHIFT 17
-#define OMAP4_USBB2_ULPITLL_STP_DUPLICATEWAKEUPEVENT_MASK (1 << 17)
-#define OMAP4_USBB2_ULPITLL_CLK_DUPLICATEWAKEUPEVENT_SHIFT 16
-#define OMAP4_USBB2_ULPITLL_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 16)
-#define OMAP4_UART4_TX_DUPLICATEWAKEUPEVENT_SHIFT 15
-#define OMAP4_UART4_TX_DUPLICATEWAKEUPEVENT_MASK (1 << 15)
-#define OMAP4_UART4_RX_DUPLICATEWAKEUPEVENT_SHIFT 14
-#define OMAP4_UART4_RX_DUPLICATEWAKEUPEVENT_MASK (1 << 14)
-#define OMAP4_MCSPI4_CS0_DUPLICATEWAKEUPEVENT_SHIFT 13
-#define OMAP4_MCSPI4_CS0_DUPLICATEWAKEUPEVENT_MASK (1 << 13)
-#define OMAP4_MCSPI4_SOMI_DUPLICATEWAKEUPEVENT_SHIFT 12
-#define OMAP4_MCSPI4_SOMI_DUPLICATEWAKEUPEVENT_MASK (1 << 12)
-#define OMAP4_MCSPI4_SIMO_DUPLICATEWAKEUPEVENT_SHIFT 11
-#define OMAP4_MCSPI4_SIMO_DUPLICATEWAKEUPEVENT_MASK (1 << 11)
-#define OMAP4_MCSPI4_CLK_DUPLICATEWAKEUPEVENT_SHIFT 10
-#define OMAP4_MCSPI4_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 10)
-#define OMAP4_SDMMC5_DAT3_DUPLICATEWAKEUPEVENT_SHIFT 9
-#define OMAP4_SDMMC5_DAT3_DUPLICATEWAKEUPEVENT_MASK (1 << 9)
-#define OMAP4_SDMMC5_DAT2_DUPLICATEWAKEUPEVENT_SHIFT 8
-#define OMAP4_SDMMC5_DAT2_DUPLICATEWAKEUPEVENT_MASK (1 << 8)
-#define OMAP4_SDMMC5_DAT1_DUPLICATEWAKEUPEVENT_SHIFT 7
-#define OMAP4_SDMMC5_DAT1_DUPLICATEWAKEUPEVENT_MASK (1 << 7)
-#define OMAP4_SDMMC5_DAT0_DUPLICATEWAKEUPEVENT_SHIFT 6
-#define OMAP4_SDMMC5_DAT0_DUPLICATEWAKEUPEVENT_MASK (1 << 6)
-#define OMAP4_SDMMC5_CMD_DUPLICATEWAKEUPEVENT_SHIFT 5
-#define OMAP4_SDMMC5_CMD_DUPLICATEWAKEUPEVENT_MASK (1 << 5)
-#define OMAP4_SDMMC5_CLK_DUPLICATEWAKEUPEVENT_SHIFT 4
-#define OMAP4_SDMMC5_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 4)
-#define OMAP4_UART3_TX_IRTX_DUPLICATEWAKEUPEVENT_SHIFT 3
-#define OMAP4_UART3_TX_IRTX_DUPLICATEWAKEUPEVENT_MASK (1 << 3)
-#define OMAP4_UART3_RX_IRRX_DUPLICATEWAKEUPEVENT_SHIFT 2
-#define OMAP4_UART3_RX_IRRX_DUPLICATEWAKEUPEVENT_MASK (1 << 2)
-#define OMAP4_UART3_RTS_SD_DUPLICATEWAKEUPEVENT_SHIFT 1
-#define OMAP4_UART3_RTS_SD_DUPLICATEWAKEUPEVENT_MASK (1 << 1)
-#define OMAP4_UART3_CTS_RCTX_DUPLICATEWAKEUPEVENT_SHIFT 0
-#define OMAP4_UART3_CTS_RCTX_DUPLICATEWAKEUPEVENT_MASK (1 << 0)
-
-/* PADCONF_WAKEUPEVENT_5 */
-#define OMAP4_DPM_EMU11_DUPLICATEWAKEUPEVENT_SHIFT 31
-#define OMAP4_DPM_EMU11_DUPLICATEWAKEUPEVENT_MASK (1 << 31)
-#define OMAP4_DPM_EMU10_DUPLICATEWAKEUPEVENT_SHIFT 30
-#define OMAP4_DPM_EMU10_DUPLICATEWAKEUPEVENT_MASK (1 << 30)
-#define OMAP4_DPM_EMU9_DUPLICATEWAKEUPEVENT_SHIFT 29
-#define OMAP4_DPM_EMU9_DUPLICATEWAKEUPEVENT_MASK (1 << 29)
-#define OMAP4_DPM_EMU8_DUPLICATEWAKEUPEVENT_SHIFT 28
-#define OMAP4_DPM_EMU8_DUPLICATEWAKEUPEVENT_MASK (1 << 28)
-#define OMAP4_DPM_EMU7_DUPLICATEWAKEUPEVENT_SHIFT 27
-#define OMAP4_DPM_EMU7_DUPLICATEWAKEUPEVENT_MASK (1 << 27)
-#define OMAP4_DPM_EMU6_DUPLICATEWAKEUPEVENT_SHIFT 26
-#define OMAP4_DPM_EMU6_DUPLICATEWAKEUPEVENT_MASK (1 << 26)
-#define OMAP4_DPM_EMU5_DUPLICATEWAKEUPEVENT_SHIFT 25
-#define OMAP4_DPM_EMU5_DUPLICATEWAKEUPEVENT_MASK (1 << 25)
-#define OMAP4_DPM_EMU4_DUPLICATEWAKEUPEVENT_SHIFT 24
-#define OMAP4_DPM_EMU4_DUPLICATEWAKEUPEVENT_MASK (1 << 24)
-#define OMAP4_DPM_EMU3_DUPLICATEWAKEUPEVENT_SHIFT 23
-#define OMAP4_DPM_EMU3_DUPLICATEWAKEUPEVENT_MASK (1 << 23)
-#define OMAP4_DPM_EMU2_DUPLICATEWAKEUPEVENT_SHIFT 22
-#define OMAP4_DPM_EMU2_DUPLICATEWAKEUPEVENT_MASK (1 << 22)
-#define OMAP4_DPM_EMU1_DUPLICATEWAKEUPEVENT_SHIFT 21
-#define OMAP4_DPM_EMU1_DUPLICATEWAKEUPEVENT_MASK (1 << 21)
-#define OMAP4_DPM_EMU0_DUPLICATEWAKEUPEVENT_SHIFT 20
-#define OMAP4_DPM_EMU0_DUPLICATEWAKEUPEVENT_MASK (1 << 20)
-#define OMAP4_SYS_BOOT5_DUPLICATEWAKEUPEVENT_SHIFT 19
-#define OMAP4_SYS_BOOT5_DUPLICATEWAKEUPEVENT_MASK (1 << 19)
-#define OMAP4_SYS_BOOT4_DUPLICATEWAKEUPEVENT_SHIFT 18
-#define OMAP4_SYS_BOOT4_DUPLICATEWAKEUPEVENT_MASK (1 << 18)
-#define OMAP4_SYS_BOOT3_DUPLICATEWAKEUPEVENT_SHIFT 17
-#define OMAP4_SYS_BOOT3_DUPLICATEWAKEUPEVENT_MASK (1 << 17)
-#define OMAP4_SYS_BOOT2_DUPLICATEWAKEUPEVENT_SHIFT 16
-#define OMAP4_SYS_BOOT2_DUPLICATEWAKEUPEVENT_MASK (1 << 16)
-#define OMAP4_SYS_BOOT1_DUPLICATEWAKEUPEVENT_SHIFT 15
-#define OMAP4_SYS_BOOT1_DUPLICATEWAKEUPEVENT_MASK (1 << 15)
-#define OMAP4_SYS_BOOT0_DUPLICATEWAKEUPEVENT_SHIFT 14
-#define OMAP4_SYS_BOOT0_DUPLICATEWAKEUPEVENT_MASK (1 << 14)
-#define OMAP4_SYS_NIRQ2_DUPLICATEWAKEUPEVENT_SHIFT 13
-#define OMAP4_SYS_NIRQ2_DUPLICATEWAKEUPEVENT_MASK (1 << 13)
-#define OMAP4_SYS_NIRQ1_DUPLICATEWAKEUPEVENT_SHIFT 12
-#define OMAP4_SYS_NIRQ1_DUPLICATEWAKEUPEVENT_MASK (1 << 12)
-#define OMAP4_FREF_CLK2_OUT_DUPLICATEWAKEUPEVENT_SHIFT 11
-#define OMAP4_FREF_CLK2_OUT_DUPLICATEWAKEUPEVENT_MASK (1 << 11)
-#define OMAP4_FREF_CLK1_OUT_DUPLICATEWAKEUPEVENT_SHIFT 10
-#define OMAP4_FREF_CLK1_OUT_DUPLICATEWAKEUPEVENT_MASK (1 << 10)
-#define OMAP4_UNIPRO_RY2_DUPLICATEWAKEUPEVENT_SHIFT 9
-#define OMAP4_UNIPRO_RY2_DUPLICATEWAKEUPEVENT_MASK (1 << 9)
-#define OMAP4_UNIPRO_RX2_DUPLICATEWAKEUPEVENT_SHIFT 8
-#define OMAP4_UNIPRO_RX2_DUPLICATEWAKEUPEVENT_MASK (1 << 8)
-#define OMAP4_UNIPRO_RY1_DUPLICATEWAKEUPEVENT_SHIFT 7
-#define OMAP4_UNIPRO_RY1_DUPLICATEWAKEUPEVENT_MASK (1 << 7)
-#define OMAP4_UNIPRO_RX1_DUPLICATEWAKEUPEVENT_SHIFT 6
-#define OMAP4_UNIPRO_RX1_DUPLICATEWAKEUPEVENT_MASK (1 << 6)
-#define OMAP4_UNIPRO_RY0_DUPLICATEWAKEUPEVENT_SHIFT 5
-#define OMAP4_UNIPRO_RY0_DUPLICATEWAKEUPEVENT_MASK (1 << 5)
-#define OMAP4_UNIPRO_RX0_DUPLICATEWAKEUPEVENT_SHIFT 4
-#define OMAP4_UNIPRO_RX0_DUPLICATEWAKEUPEVENT_MASK (1 << 4)
-#define OMAP4_UNIPRO_TY2_DUPLICATEWAKEUPEVENT_SHIFT 3
-#define OMAP4_UNIPRO_TY2_DUPLICATEWAKEUPEVENT_MASK (1 << 3)
-#define OMAP4_UNIPRO_TX2_DUPLICATEWAKEUPEVENT_SHIFT 2
-#define OMAP4_UNIPRO_TX2_DUPLICATEWAKEUPEVENT_MASK (1 << 2)
-#define OMAP4_UNIPRO_TY1_DUPLICATEWAKEUPEVENT_SHIFT 1
-#define OMAP4_UNIPRO_TY1_DUPLICATEWAKEUPEVENT_MASK (1 << 1)
-#define OMAP4_UNIPRO_TX1_DUPLICATEWAKEUPEVENT_SHIFT 0
-#define OMAP4_UNIPRO_TX1_DUPLICATEWAKEUPEVENT_MASK (1 << 0)
-
-/* PADCONF_WAKEUPEVENT_6 */
-#define OMAP4_DPM_EMU19_DUPLICATEWAKEUPEVENT_SHIFT 7
-#define OMAP4_DPM_EMU19_DUPLICATEWAKEUPEVENT_MASK (1 << 7)
-#define OMAP4_DPM_EMU18_DUPLICATEWAKEUPEVENT_SHIFT 6
-#define OMAP4_DPM_EMU18_DUPLICATEWAKEUPEVENT_MASK (1 << 6)
-#define OMAP4_DPM_EMU17_DUPLICATEWAKEUPEVENT_SHIFT 5
-#define OMAP4_DPM_EMU17_DUPLICATEWAKEUPEVENT_MASK (1 << 5)
-#define OMAP4_DPM_EMU16_DUPLICATEWAKEUPEVENT_SHIFT 4
-#define OMAP4_DPM_EMU16_DUPLICATEWAKEUPEVENT_MASK (1 << 4)
-#define OMAP4_DPM_EMU15_DUPLICATEWAKEUPEVENT_SHIFT 3
-#define OMAP4_DPM_EMU15_DUPLICATEWAKEUPEVENT_MASK (1 << 3)
-#define OMAP4_DPM_EMU14_DUPLICATEWAKEUPEVENT_SHIFT 2
-#define OMAP4_DPM_EMU14_DUPLICATEWAKEUPEVENT_MASK (1 << 2)
-#define OMAP4_DPM_EMU13_DUPLICATEWAKEUPEVENT_SHIFT 1
-#define OMAP4_DPM_EMU13_DUPLICATEWAKEUPEVENT_MASK (1 << 1)
-#define OMAP4_DPM_EMU12_DUPLICATEWAKEUPEVENT_SHIFT 0
-#define OMAP4_DPM_EMU12_DUPLICATEWAKEUPEVENT_MASK (1 << 0)
-
-/* CONTROL_PADCONF_GLOBAL */
-#define OMAP4_FORCE_OFFMODE_EN_SHIFT 31
-#define OMAP4_FORCE_OFFMODE_EN_MASK (1 << 31)
-
-/* CONTROL_PADCONF_MODE */
-#define OMAP4_VDDS_DV_BANK0_SHIFT 31
-#define OMAP4_VDDS_DV_BANK0_MASK (1 << 31)
-#define OMAP4_VDDS_DV_BANK1_SHIFT 30
-#define OMAP4_VDDS_DV_BANK1_MASK (1 << 30)
-#define OMAP4_VDDS_DV_BANK3_SHIFT 29
-#define OMAP4_VDDS_DV_BANK3_MASK (1 << 29)
-#define OMAP4_VDDS_DV_BANK4_SHIFT 28
-#define OMAP4_VDDS_DV_BANK4_MASK (1 << 28)
-#define OMAP4_VDDS_DV_BANK5_SHIFT 27
-#define OMAP4_VDDS_DV_BANK5_MASK (1 << 27)
-#define OMAP4_VDDS_DV_BANK6_SHIFT 26
-#define OMAP4_VDDS_DV_BANK6_MASK (1 << 26)
-#define OMAP4_VDDS_DV_C2C_SHIFT 25
-#define OMAP4_VDDS_DV_C2C_MASK (1 << 25)
-#define OMAP4_VDDS_DV_CAM_SHIFT 24
-#define OMAP4_VDDS_DV_CAM_MASK (1 << 24)
-#define OMAP4_VDDS_DV_GPMC_SHIFT 23
-#define OMAP4_VDDS_DV_GPMC_MASK (1 << 23)
-#define OMAP4_VDDS_DV_SDMMC2_SHIFT 22
-#define OMAP4_VDDS_DV_SDMMC2_MASK (1 << 22)
-
-/* CONTROL_SMART1IO_PADCONF_0 */
-#define OMAP4_ABE_DR0_SC_SHIFT 30
-#define OMAP4_ABE_DR0_SC_MASK (0x3 << 30)
-#define OMAP4_CAM_DR0_SC_SHIFT 28
-#define OMAP4_CAM_DR0_SC_MASK (0x3 << 28)
-#define OMAP4_FREF_DR2_SC_SHIFT 26
-#define OMAP4_FREF_DR2_SC_MASK (0x3 << 26)
-#define OMAP4_FREF_DR3_SC_SHIFT 24
-#define OMAP4_FREF_DR3_SC_MASK (0x3 << 24)
-#define OMAP4_GPIO_DR8_SC_SHIFT 22
-#define OMAP4_GPIO_DR8_SC_MASK (0x3 << 22)
-#define OMAP4_GPIO_DR9_SC_SHIFT 20
-#define OMAP4_GPIO_DR9_SC_MASK (0x3 << 20)
-#define OMAP4_GPMC_DR2_SC_SHIFT 18
-#define OMAP4_GPMC_DR2_SC_MASK (0x3 << 18)
-#define OMAP4_GPMC_DR3_SC_SHIFT 16
-#define OMAP4_GPMC_DR3_SC_MASK (0x3 << 16)
-#define OMAP4_GPMC_DR6_SC_SHIFT 14
-#define OMAP4_GPMC_DR6_SC_MASK (0x3 << 14)
-#define OMAP4_HDMI_DR0_SC_SHIFT 12
-#define OMAP4_HDMI_DR0_SC_MASK (0x3 << 12)
-#define OMAP4_MCSPI1_DR0_SC_SHIFT 10
-#define OMAP4_MCSPI1_DR0_SC_MASK (0x3 << 10)
-#define OMAP4_UART1_DR0_SC_SHIFT 8
-#define OMAP4_UART1_DR0_SC_MASK (0x3 << 8)
-#define OMAP4_UART3_DR0_SC_SHIFT 6
-#define OMAP4_UART3_DR0_SC_MASK (0x3 << 6)
-#define OMAP4_UART3_DR1_SC_SHIFT 4
-#define OMAP4_UART3_DR1_SC_MASK (0x3 << 4)
-#define OMAP4_UNIPRO_DR0_SC_SHIFT 2
-#define OMAP4_UNIPRO_DR0_SC_MASK (0x3 << 2)
-#define OMAP4_UNIPRO_DR1_SC_SHIFT 0
-#define OMAP4_UNIPRO_DR1_SC_MASK (0x3 << 0)
-
-/* CONTROL_SMART1IO_PADCONF_1 */
-#define OMAP4_ABE_DR0_LB_SHIFT 30
-#define OMAP4_ABE_DR0_LB_MASK (0x3 << 30)
-#define OMAP4_CAM_DR0_LB_SHIFT 28
-#define OMAP4_CAM_DR0_LB_MASK (0x3 << 28)
-#define OMAP4_FREF_DR2_LB_SHIFT 26
-#define OMAP4_FREF_DR2_LB_MASK (0x3 << 26)
-#define OMAP4_FREF_DR3_LB_SHIFT 24
-#define OMAP4_FREF_DR3_LB_MASK (0x3 << 24)
-#define OMAP4_GPIO_DR8_LB_SHIFT 22
-#define OMAP4_GPIO_DR8_LB_MASK (0x3 << 22)
-#define OMAP4_GPIO_DR9_LB_SHIFT 20
-#define OMAP4_GPIO_DR9_LB_MASK (0x3 << 20)
-#define OMAP4_GPMC_DR2_LB_SHIFT 18
-#define OMAP4_GPMC_DR2_LB_MASK (0x3 << 18)
-#define OMAP4_GPMC_DR3_LB_SHIFT 16
-#define OMAP4_GPMC_DR3_LB_MASK (0x3 << 16)
-#define OMAP4_GPMC_DR6_LB_SHIFT 14
-#define OMAP4_GPMC_DR6_LB_MASK (0x3 << 14)
-#define OMAP4_HDMI_DR0_LB_SHIFT 12
-#define OMAP4_HDMI_DR0_LB_MASK (0x3 << 12)
-#define OMAP4_MCSPI1_DR0_LB_SHIFT 10
-#define OMAP4_MCSPI1_DR0_LB_MASK (0x3 << 10)
-#define OMAP4_UART1_DR0_LB_SHIFT 8
-#define OMAP4_UART1_DR0_LB_MASK (0x3 << 8)
-#define OMAP4_UART3_DR0_LB_SHIFT 6
-#define OMAP4_UART3_DR0_LB_MASK (0x3 << 6)
-#define OMAP4_UART3_DR1_LB_SHIFT 4
-#define OMAP4_UART3_DR1_LB_MASK (0x3 << 4)
-#define OMAP4_UNIPRO_DR0_LB_SHIFT 2
-#define OMAP4_UNIPRO_DR0_LB_MASK (0x3 << 2)
-#define OMAP4_UNIPRO_DR1_LB_SHIFT 0
-#define OMAP4_UNIPRO_DR1_LB_MASK (0x3 << 0)
-
-/* CONTROL_SMART2IO_PADCONF_0 */
-#define OMAP4_C2C_DR0_LB_SHIFT 31
-#define OMAP4_C2C_DR0_LB_MASK (1 << 31)
-#define OMAP4_DPM_DR1_LB_SHIFT 30
-#define OMAP4_DPM_DR1_LB_MASK (1 << 30)
-#define OMAP4_DPM_DR2_LB_SHIFT 29
-#define OMAP4_DPM_DR2_LB_MASK (1 << 29)
-#define OMAP4_DPM_DR3_LB_SHIFT 28
-#define OMAP4_DPM_DR3_LB_MASK (1 << 28)
-#define OMAP4_GPIO_DR0_LB_SHIFT 27
-#define OMAP4_GPIO_DR0_LB_MASK (1 << 27)
-#define OMAP4_GPIO_DR1_LB_SHIFT 26
-#define OMAP4_GPIO_DR1_LB_MASK (1 << 26)
-#define OMAP4_GPIO_DR10_LB_SHIFT 25
-#define OMAP4_GPIO_DR10_LB_MASK (1 << 25)
-#define OMAP4_GPIO_DR2_LB_SHIFT 24
-#define OMAP4_GPIO_DR2_LB_MASK (1 << 24)
-#define OMAP4_GPMC_DR0_LB_SHIFT 23
-#define OMAP4_GPMC_DR0_LB_MASK (1 << 23)
-#define OMAP4_GPMC_DR1_LB_SHIFT 22
-#define OMAP4_GPMC_DR1_LB_MASK (1 << 22)
-#define OMAP4_GPMC_DR4_LB_SHIFT 21
-#define OMAP4_GPMC_DR4_LB_MASK (1 << 21)
-#define OMAP4_GPMC_DR5_LB_SHIFT 20
-#define OMAP4_GPMC_DR5_LB_MASK (1 << 20)
-#define OMAP4_GPMC_DR7_LB_SHIFT 19
-#define OMAP4_GPMC_DR7_LB_MASK (1 << 19)
-#define OMAP4_HSI2_DR0_LB_SHIFT 18
-#define OMAP4_HSI2_DR0_LB_MASK (1 << 18)
-#define OMAP4_HSI2_DR1_LB_SHIFT 17
-#define OMAP4_HSI2_DR1_LB_MASK (1 << 17)
-#define OMAP4_HSI2_DR2_LB_SHIFT 16
-#define OMAP4_HSI2_DR2_LB_MASK (1 << 16)
-#define OMAP4_KPD_DR0_LB_SHIFT 15
-#define OMAP4_KPD_DR0_LB_MASK (1 << 15)
-#define OMAP4_KPD_DR1_LB_SHIFT 14
-#define OMAP4_KPD_DR1_LB_MASK (1 << 14)
-#define OMAP4_PDM_DR0_LB_SHIFT 13
-#define OMAP4_PDM_DR0_LB_MASK (1 << 13)
-#define OMAP4_SDMMC2_DR0_LB_SHIFT 12
-#define OMAP4_SDMMC2_DR0_LB_MASK (1 << 12)
-#define OMAP4_SDMMC3_DR0_LB_SHIFT 11
-#define OMAP4_SDMMC3_DR0_LB_MASK (1 << 11)
-#define OMAP4_SDMMC4_DR0_LB_SHIFT 10
-#define OMAP4_SDMMC4_DR0_LB_MASK (1 << 10)
-#define OMAP4_SDMMC4_DR1_LB_SHIFT 9
-#define OMAP4_SDMMC4_DR1_LB_MASK (1 << 9)
-#define OMAP4_SPI3_DR0_LB_SHIFT 8
-#define OMAP4_SPI3_DR0_LB_MASK (1 << 8)
-#define OMAP4_SPI3_DR1_LB_SHIFT 7
-#define OMAP4_SPI3_DR1_LB_MASK (1 << 7)
-#define OMAP4_UART3_DR2_LB_SHIFT 6
-#define OMAP4_UART3_DR2_LB_MASK (1 << 6)
-#define OMAP4_UART3_DR3_LB_SHIFT 5
-#define OMAP4_UART3_DR3_LB_MASK (1 << 5)
-#define OMAP4_UART3_DR4_LB_SHIFT 4
-#define OMAP4_UART3_DR4_LB_MASK (1 << 4)
-#define OMAP4_UART3_DR5_LB_SHIFT 3
-#define OMAP4_UART3_DR5_LB_MASK (1 << 3)
-#define OMAP4_USBA0_DR1_LB_SHIFT 2
-#define OMAP4_USBA0_DR1_LB_MASK (1 << 2)
-#define OMAP4_USBA_DR2_LB_SHIFT 1
-#define OMAP4_USBA_DR2_LB_MASK (1 << 1)
-
-/* CONTROL_SMART2IO_PADCONF_1 */
-#define OMAP4_USBB1_DR0_LB_SHIFT 31
-#define OMAP4_USBB1_DR0_LB_MASK (1 << 31)
-#define OMAP4_USBB2_DR0_LB_SHIFT 30
-#define OMAP4_USBB2_DR0_LB_MASK (1 << 30)
-#define OMAP4_USBA0_DR0_LB_SHIFT 29
-#define OMAP4_USBA0_DR0_LB_MASK (1 << 29)
-
-/* CONTROL_SMART3IO_PADCONF_0 */
-#define OMAP4_DMIC_DR0_MB_SHIFT 30
-#define OMAP4_DMIC_DR0_MB_MASK (0x3 << 30)
-#define OMAP4_GPIO_DR3_MB_SHIFT 28
-#define OMAP4_GPIO_DR3_MB_MASK (0x3 << 28)
-#define OMAP4_GPIO_DR4_MB_SHIFT 26
-#define OMAP4_GPIO_DR4_MB_MASK (0x3 << 26)
-#define OMAP4_GPIO_DR5_MB_SHIFT 24
-#define OMAP4_GPIO_DR5_MB_MASK (0x3 << 24)
-#define OMAP4_GPIO_DR6_MB_SHIFT 22
-#define OMAP4_GPIO_DR6_MB_MASK (0x3 << 22)
-#define OMAP4_HSI_DR1_MB_SHIFT 20
-#define OMAP4_HSI_DR1_MB_MASK (0x3 << 20)
-#define OMAP4_HSI_DR2_MB_SHIFT 18
-#define OMAP4_HSI_DR2_MB_MASK (0x3 << 18)
-#define OMAP4_HSI_DR3_MB_SHIFT 16
-#define OMAP4_HSI_DR3_MB_MASK (0x3 << 16)
-#define OMAP4_MCBSP2_DR0_MB_SHIFT 14
-#define OMAP4_MCBSP2_DR0_MB_MASK (0x3 << 14)
-#define OMAP4_MCSPI4_DR0_MB_SHIFT 12
-#define OMAP4_MCSPI4_DR0_MB_MASK (0x3 << 12)
-#define OMAP4_MCSPI4_DR1_MB_SHIFT 10
-#define OMAP4_MCSPI4_DR1_MB_MASK (0x3 << 10)
-#define OMAP4_SDMMC3_DR0_MB_SHIFT 8
-#define OMAP4_SDMMC3_DR0_MB_MASK (0x3 << 8)
-#define OMAP4_SPI2_DR0_MB_SHIFT 0
-#define OMAP4_SPI2_DR0_MB_MASK (0x3 << 0)
-
-/* CONTROL_SMART3IO_PADCONF_1 */
-#define OMAP4_SPI2_DR1_MB_SHIFT 30
-#define OMAP4_SPI2_DR1_MB_MASK (0x3 << 30)
-#define OMAP4_SPI2_DR2_MB_SHIFT 28
-#define OMAP4_SPI2_DR2_MB_MASK (0x3 << 28)
-#define OMAP4_UART2_DR0_MB_SHIFT 26
-#define OMAP4_UART2_DR0_MB_MASK (0x3 << 26)
-#define OMAP4_UART2_DR1_MB_SHIFT 24
-#define OMAP4_UART2_DR1_MB_MASK (0x3 << 24)
-#define OMAP4_UART4_DR0_MB_SHIFT 22
-#define OMAP4_UART4_DR0_MB_MASK (0x3 << 22)
-#define OMAP4_HSI_DR0_MB_SHIFT 20
-#define OMAP4_HSI_DR0_MB_MASK (0x3 << 20)
-
-/* CONTROL_SMART3IO_PADCONF_2 */
-#define OMAP4_DMIC_DR0_LB_SHIFT 31
-#define OMAP4_DMIC_DR0_LB_MASK (1 << 31)
-#define OMAP4_GPIO_DR3_LB_SHIFT 30
-#define OMAP4_GPIO_DR3_LB_MASK (1 << 30)
-#define OMAP4_GPIO_DR4_LB_SHIFT 29
-#define OMAP4_GPIO_DR4_LB_MASK (1 << 29)
-#define OMAP4_GPIO_DR5_LB_SHIFT 28
-#define OMAP4_GPIO_DR5_LB_MASK (1 << 28)
-#define OMAP4_GPIO_DR6_LB_SHIFT 27
-#define OMAP4_GPIO_DR6_LB_MASK (1 << 27)
-#define OMAP4_HSI_DR1_LB_SHIFT 26
-#define OMAP4_HSI_DR1_LB_MASK (1 << 26)
-#define OMAP4_HSI_DR2_LB_SHIFT 25
-#define OMAP4_HSI_DR2_LB_MASK (1 << 25)
-#define OMAP4_HSI_DR3_LB_SHIFT 24
-#define OMAP4_HSI_DR3_LB_MASK (1 << 24)
-#define OMAP4_MCBSP2_DR0_LB_SHIFT 23
-#define OMAP4_MCBSP2_DR0_LB_MASK (1 << 23)
-#define OMAP4_MCSPI4_DR0_LB_SHIFT 22
-#define OMAP4_MCSPI4_DR0_LB_MASK (1 << 22)
-#define OMAP4_MCSPI4_DR1_LB_SHIFT 21
-#define OMAP4_MCSPI4_DR1_LB_MASK (1 << 21)
-#define OMAP4_SLIMBUS2_DR0_LB_SHIFT 18
-#define OMAP4_SLIMBUS2_DR0_LB_MASK (1 << 18)
-#define OMAP4_SPI2_DR0_LB_SHIFT 16
-#define OMAP4_SPI2_DR0_LB_MASK (1 << 16)
-#define OMAP4_SPI2_DR1_LB_SHIFT 15
-#define OMAP4_SPI2_DR1_LB_MASK (1 << 15)
-#define OMAP4_SPI2_DR2_LB_SHIFT 14
-#define OMAP4_SPI2_DR2_LB_MASK (1 << 14)
-#define OMAP4_UART2_DR0_LB_SHIFT 13
-#define OMAP4_UART2_DR0_LB_MASK (1 << 13)
-#define OMAP4_UART2_DR1_LB_SHIFT 12
-#define OMAP4_UART2_DR1_LB_MASK (1 << 12)
-#define OMAP4_UART4_DR0_LB_SHIFT 11
-#define OMAP4_UART4_DR0_LB_MASK (1 << 11)
-#define OMAP4_HSI_DR0_LB_SHIFT 10
-#define OMAP4_HSI_DR0_LB_MASK (1 << 10)
-
-/* CONTROL_USBB_HSIC */
-#define OMAP4_USBB2_DR1_SR_SHIFT 30
-#define OMAP4_USBB2_DR1_SR_MASK (0x3 << 30)
-#define OMAP4_USBB2_DR1_I_SHIFT 27
-#define OMAP4_USBB2_DR1_I_MASK (0x7 << 27)
-#define OMAP4_USBB1_DR1_SR_SHIFT 25
-#define OMAP4_USBB1_DR1_SR_MASK (0x3 << 25)
-#define OMAP4_USBB1_DR1_I_SHIFT 22
-#define OMAP4_USBB1_DR1_I_MASK (0x7 << 22)
-#define OMAP4_USBB1_HSIC_DATA_WD_SHIFT 20
-#define OMAP4_USBB1_HSIC_DATA_WD_MASK (0x3 << 20)
-#define OMAP4_USBB1_HSIC_STROBE_WD_SHIFT 18
-#define OMAP4_USBB1_HSIC_STROBE_WD_MASK (0x3 << 18)
-#define OMAP4_USBB2_HSIC_DATA_WD_SHIFT 16
-#define OMAP4_USBB2_HSIC_DATA_WD_MASK (0x3 << 16)
-#define OMAP4_USBB2_HSIC_STROBE_WD_SHIFT 14
-#define OMAP4_USBB2_HSIC_STROBE_WD_MASK (0x3 << 14)
-#define OMAP4_USBB1_HSIC_DATA_OFFMODE_WD_ENABLE_SHIFT 13
-#define OMAP4_USBB1_HSIC_DATA_OFFMODE_WD_ENABLE_MASK (1 << 13)
-#define OMAP4_USBB1_HSIC_DATA_OFFMODE_WD_SHIFT 11
-#define OMAP4_USBB1_HSIC_DATA_OFFMODE_WD_MASK (0x3 << 11)
-#define OMAP4_USBB1_HSIC_STROBE_OFFMODE_WD_ENABLE_SHIFT 10
-#define OMAP4_USBB1_HSIC_STROBE_OFFMODE_WD_ENABLE_MASK (1 << 10)
-#define OMAP4_USBB1_HSIC_STROBE_OFFMODE_WD_SHIFT 8
-#define OMAP4_USBB1_HSIC_STROBE_OFFMODE_WD_MASK (0x3 << 8)
-#define OMAP4_USBB2_HSIC_DATA_OFFMODE_WD_ENABLE_SHIFT 7
-#define OMAP4_USBB2_HSIC_DATA_OFFMODE_WD_ENABLE_MASK (1 << 7)
-#define OMAP4_USBB2_HSIC_DATA_OFFMODE_WD_SHIFT 5
-#define OMAP4_USBB2_HSIC_DATA_OFFMODE_WD_MASK (0x3 << 5)
-#define OMAP4_USBB2_HSIC_STROBE_OFFMODE_WD_ENABLE_SHIFT 4
-#define OMAP4_USBB2_HSIC_STROBE_OFFMODE_WD_ENABLE_MASK (1 << 4)
-#define OMAP4_USBB2_HSIC_STROBE_OFFMODE_WD_SHIFT 2
-#define OMAP4_USBB2_HSIC_STROBE_OFFMODE_WD_MASK (0x3 << 2)
-
-/* CONTROL_SLIMBUS */
-#define OMAP4_SLIMBUS1_DR0_MB_SHIFT 30
-#define OMAP4_SLIMBUS1_DR0_MB_MASK (0x3 << 30)
-#define OMAP4_SLIMBUS1_DR1_MB_SHIFT 28
-#define OMAP4_SLIMBUS1_DR1_MB_MASK (0x3 << 28)
-#define OMAP4_SLIMBUS2_DR0_MB_SHIFT 26
-#define OMAP4_SLIMBUS2_DR0_MB_MASK (0x3 << 26)
-#define OMAP4_SLIMBUS2_DR1_MB_SHIFT 24
-#define OMAP4_SLIMBUS2_DR1_MB_MASK (0x3 << 24)
-#define OMAP4_SLIMBUS2_DR2_MB_SHIFT 22
-#define OMAP4_SLIMBUS2_DR2_MB_MASK (0x3 << 22)
-#define OMAP4_SLIMBUS2_DR3_MB_SHIFT 20
-#define OMAP4_SLIMBUS2_DR3_MB_MASK (0x3 << 20)
-#define OMAP4_SLIMBUS1_DR0_LB_SHIFT 19
-#define OMAP4_SLIMBUS1_DR0_LB_MASK (1 << 19)
-#define OMAP4_SLIMBUS2_DR1_LB_SHIFT 18
-#define OMAP4_SLIMBUS2_DR1_LB_MASK (1 << 18)
-
-/* CONTROL_PBIASLITE */
-#define OMAP4_USIM_PBIASLITE_HIZ_MODE_SHIFT 31
-#define OMAP4_USIM_PBIASLITE_HIZ_MODE_MASK (1 << 31)
-#define OMAP4_USIM_PBIASLITE_SUPPLY_HI_OUT_SHIFT 30
-#define OMAP4_USIM_PBIASLITE_SUPPLY_HI_OUT_MASK (1 << 30)
-#define OMAP4_USIM_PBIASLITE_VMODE_ERROR_SHIFT 29
-#define OMAP4_USIM_PBIASLITE_VMODE_ERROR_MASK (1 << 29)
-#define OMAP4_USIM_PBIASLITE_PWRDNZ_SHIFT 28
-#define OMAP4_USIM_PBIASLITE_PWRDNZ_MASK (1 << 28)
-#define OMAP4_USIM_PBIASLITE_VMODE_SHIFT 27
-#define OMAP4_USIM_PBIASLITE_VMODE_MASK (1 << 27)
-#define OMAP4_MMC1_PWRDNZ_SHIFT 26
-#define OMAP4_MMC1_PWRDNZ_MASK (1 << 26)
-#define OMAP4_MMC1_PBIASLITE_HIZ_MODE_SHIFT 25
-#define OMAP4_MMC1_PBIASLITE_HIZ_MODE_MASK (1 << 25)
-#define OMAP4_MMC1_PBIASLITE_SUPPLY_HI_OUT_SHIFT 24
-#define OMAP4_MMC1_PBIASLITE_SUPPLY_HI_OUT_MASK (1 << 24)
-#define OMAP4_MMC1_PBIASLITE_VMODE_ERROR_SHIFT 23
-#define OMAP4_MMC1_PBIASLITE_VMODE_ERROR_MASK (1 << 23)
-#define OMAP4_MMC1_PBIASLITE_PWRDNZ_SHIFT 22
-#define OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK (1 << 22)
-#define OMAP4_MMC1_PBIASLITE_VMODE_SHIFT 21
-#define OMAP4_MMC1_PBIASLITE_VMODE_MASK (1 << 21)
-#define OMAP4_USBC1_ICUSB_PWRDNZ_SHIFT 20
-#define OMAP4_USBC1_ICUSB_PWRDNZ_MASK (1 << 20)
-
-/* CONTROL_I2C_0 */
-#define OMAP4_I2C4_SDA_GLFENB_SHIFT 31
-#define OMAP4_I2C4_SDA_GLFENB_MASK (1 << 31)
-#define OMAP4_I2C4_SDA_LOAD_BITS_SHIFT 29
-#define OMAP4_I2C4_SDA_LOAD_BITS_MASK (0x3 << 29)
-#define OMAP4_I2C4_SDA_PULLUPRESX_SHIFT 28
-#define OMAP4_I2C4_SDA_PULLUPRESX_MASK (1 << 28)
-#define OMAP4_I2C3_SDA_GLFENB_SHIFT 27
-#define OMAP4_I2C3_SDA_GLFENB_MASK (1 << 27)
-#define OMAP4_I2C3_SDA_LOAD_BITS_SHIFT 25
-#define OMAP4_I2C3_SDA_LOAD_BITS_MASK (0x3 << 25)
-#define OMAP4_I2C3_SDA_PULLUPRESX_SHIFT 24
-#define OMAP4_I2C3_SDA_PULLUPRESX_MASK (1 << 24)
-#define OMAP4_I2C2_SDA_GLFENB_SHIFT 23
-#define OMAP4_I2C2_SDA_GLFENB_MASK (1 << 23)
-#define OMAP4_I2C2_SDA_LOAD_BITS_SHIFT 21
-#define OMAP4_I2C2_SDA_LOAD_BITS_MASK (0x3 << 21)
-#define OMAP4_I2C2_SDA_PULLUPRESX_SHIFT 20
-#define OMAP4_I2C2_SDA_PULLUPRESX_MASK (1 << 20)
-#define OMAP4_I2C1_SDA_GLFENB_SHIFT 19
-#define OMAP4_I2C1_SDA_GLFENB_MASK (1 << 19)
-#define OMAP4_I2C1_SDA_LOAD_BITS_SHIFT 17
-#define OMAP4_I2C1_SDA_LOAD_BITS_MASK (0x3 << 17)
-#define OMAP4_I2C1_SDA_PULLUPRESX_SHIFT 16
-#define OMAP4_I2C1_SDA_PULLUPRESX_MASK (1 << 16)
-#define OMAP4_I2C4_SCL_GLFENB_SHIFT 15
-#define OMAP4_I2C4_SCL_GLFENB_MASK (1 << 15)
-#define OMAP4_I2C4_SCL_LOAD_BITS_SHIFT 13
-#define OMAP4_I2C4_SCL_LOAD_BITS_MASK (0x3 << 13)
-#define OMAP4_I2C4_SCL_PULLUPRESX_SHIFT 12
-#define OMAP4_I2C4_SCL_PULLUPRESX_MASK (1 << 12)
-#define OMAP4_I2C3_SCL_GLFENB_SHIFT 11
-#define OMAP4_I2C3_SCL_GLFENB_MASK (1 << 11)
-#define OMAP4_I2C3_SCL_LOAD_BITS_SHIFT 9
-#define OMAP4_I2C3_SCL_LOAD_BITS_MASK (0x3 << 9)
-#define OMAP4_I2C3_SCL_PULLUPRESX_SHIFT 8
-#define OMAP4_I2C3_SCL_PULLUPRESX_MASK (1 << 8)
-#define OMAP4_I2C2_SCL_GLFENB_SHIFT 7
-#define OMAP4_I2C2_SCL_GLFENB_MASK (1 << 7)
-#define OMAP4_I2C2_SCL_LOAD_BITS_SHIFT 5
-#define OMAP4_I2C2_SCL_LOAD_BITS_MASK (0x3 << 5)
-#define OMAP4_I2C2_SCL_PULLUPRESX_SHIFT 4
-#define OMAP4_I2C2_SCL_PULLUPRESX_MASK (1 << 4)
-#define OMAP4_I2C1_SCL_GLFENB_SHIFT 3
-#define OMAP4_I2C1_SCL_GLFENB_MASK (1 << 3)
-#define OMAP4_I2C1_SCL_LOAD_BITS_SHIFT 1
-#define OMAP4_I2C1_SCL_LOAD_BITS_MASK (0x3 << 1)
-#define OMAP4_I2C1_SCL_PULLUPRESX_SHIFT 0
-#define OMAP4_I2C1_SCL_PULLUPRESX_MASK (1 << 0)
-
-/* CONTROL_CAMERA_RX */
-#define OMAP4_CAMERARX_UNIPRO_CTRLCLKEN_SHIFT 31
-#define OMAP4_CAMERARX_UNIPRO_CTRLCLKEN_MASK (1 << 31)
-#define OMAP4_CAMERARX_CSI22_LANEENABLE_SHIFT 29
-#define OMAP4_CAMERARX_CSI22_LANEENABLE_MASK (0x3 << 29)
-#define OMAP4_CAMERARX_CSI21_LANEENABLE_SHIFT 24
-#define OMAP4_CAMERARX_CSI21_LANEENABLE_MASK (0x1f << 24)
-#define OMAP4_CAMERARX_UNIPRO_CAMMODE_SHIFT 22
-#define OMAP4_CAMERARX_UNIPRO_CAMMODE_MASK (0x3 << 22)
-#define OMAP4_CAMERARX_CSI22_CTRLCLKEN_SHIFT 21
-#define OMAP4_CAMERARX_CSI22_CTRLCLKEN_MASK (1 << 21)
-#define OMAP4_CAMERARX_CSI22_CAMMODE_SHIFT 19
-#define OMAP4_CAMERARX_CSI22_CAMMODE_MASK (0x3 << 19)
-#define OMAP4_CAMERARX_CSI21_CTRLCLKEN_SHIFT 18
-#define OMAP4_CAMERARX_CSI21_CTRLCLKEN_MASK (1 << 18)
-#define OMAP4_CAMERARX_CSI21_CAMMODE_SHIFT 16
-#define OMAP4_CAMERARX_CSI21_CAMMODE_MASK (0x3 << 16)
-
-/* CONTROL_AVDAC */
-#define OMAP4_AVDAC_ACEN_SHIFT 31
-#define OMAP4_AVDAC_ACEN_MASK (1 << 31)
-#define OMAP4_AVDAC_TVOUTBYPASS_SHIFT 30
-#define OMAP4_AVDAC_TVOUTBYPASS_MASK (1 << 30)
-#define OMAP4_AVDAC_INPUTINV_SHIFT 29
-#define OMAP4_AVDAC_INPUTINV_MASK (1 << 29)
-#define OMAP4_AVDAC_CTL_SHIFT 13
-#define OMAP4_AVDAC_CTL_MASK (0xffff << 13)
-#define OMAP4_AVDAC_CTL_WR_ACK_SHIFT 12
-#define OMAP4_AVDAC_CTL_WR_ACK_MASK (1 << 12)
-
-/* CONTROL_HDMI_TX_PHY */
-#define OMAP4_HDMITXPHY_PADORDER_SHIFT 31
-#define OMAP4_HDMITXPHY_PADORDER_MASK (1 << 31)
-#define OMAP4_HDMITXPHY_TXVALID_SHIFT 30
-#define OMAP4_HDMITXPHY_TXVALID_MASK (1 << 30)
-#define OMAP4_HDMITXPHY_ENBYPASSCLK_SHIFT 29
-#define OMAP4_HDMITXPHY_ENBYPASSCLK_MASK (1 << 29)
-#define OMAP4_HDMITXPHY_PD_PULLUPDET_SHIFT 28
-#define OMAP4_HDMITXPHY_PD_PULLUPDET_MASK (1 << 28)
-
-/* CONTROL_MMC2 */
-#define OMAP4_MMC2_FEEDBACK_CLK_SEL_SHIFT 31
-#define OMAP4_MMC2_FEEDBACK_CLK_SEL_MASK (1 << 31)
-
-/* CONTROL_DSIPHY */
-#define OMAP4_DSI2_LANEENABLE_SHIFT 29
-#define OMAP4_DSI2_LANEENABLE_MASK (0x7 << 29)
-#define OMAP4_DSI1_LANEENABLE_SHIFT 24
-#define OMAP4_DSI1_LANEENABLE_MASK (0x1f << 24)
-#define OMAP4_DSI1_PIPD_SHIFT 19
-#define OMAP4_DSI1_PIPD_MASK (0x1f << 19)
-#define OMAP4_DSI2_PIPD_SHIFT 14
-#define OMAP4_DSI2_PIPD_MASK (0x1f << 14)
-
-/* CONTROL_MCBSPLP */
-#define OMAP4_ALBCTRLRX_FSX_SHIFT 31
-#define OMAP4_ALBCTRLRX_FSX_MASK (1 << 31)
-#define OMAP4_ALBCTRLRX_CLKX_SHIFT 30
-#define OMAP4_ALBCTRLRX_CLKX_MASK (1 << 30)
-#define OMAP4_ABE_MCBSP1_DR_EN_SHIFT 29
-#define OMAP4_ABE_MCBSP1_DR_EN_MASK (1 << 29)
-
-/* CONTROL_USB2PHYCORE */
-#define OMAP4_USB2PHY_AUTORESUME_EN_SHIFT 31
-#define OMAP4_USB2PHY_AUTORESUME_EN_MASK (1 << 31)
-#define OMAP4_USB2PHY_DISCHGDET_SHIFT 30
-#define OMAP4_USB2PHY_DISCHGDET_MASK (1 << 30)
-#define OMAP4_USB2PHY_GPIOMODE_SHIFT 29
-#define OMAP4_USB2PHY_GPIOMODE_MASK (1 << 29)
-#define OMAP4_USB2PHY_CHG_DET_EXT_CTL_SHIFT 28
-#define OMAP4_USB2PHY_CHG_DET_EXT_CTL_MASK (1 << 28)
-#define OMAP4_USB2PHY_RDM_PD_CHGDET_EN_SHIFT 27
-#define OMAP4_USB2PHY_RDM_PD_CHGDET_EN_MASK (1 << 27)
-#define OMAP4_USB2PHY_RDP_PU_CHGDET_EN_SHIFT 26
-#define OMAP4_USB2PHY_RDP_PU_CHGDET_EN_MASK (1 << 26)
-#define OMAP4_USB2PHY_CHG_VSRC_EN_SHIFT 25
-#define OMAP4_USB2PHY_CHG_VSRC_EN_MASK (1 << 25)
-#define OMAP4_USB2PHY_CHG_ISINK_EN_SHIFT 24
-#define OMAP4_USB2PHY_CHG_ISINK_EN_MASK (1 << 24)
-#define OMAP4_USB2PHY_CHG_DET_STATUS_SHIFT 21
-#define OMAP4_USB2PHY_CHG_DET_STATUS_MASK (0x7 << 21)
-#define OMAP4_USB2PHY_CHG_DET_DM_COMP_SHIFT 20
-#define OMAP4_USB2PHY_CHG_DET_DM_COMP_MASK (1 << 20)
-#define OMAP4_USB2PHY_CHG_DET_DP_COMP_SHIFT 19
-#define OMAP4_USB2PHY_CHG_DET_DP_COMP_MASK (1 << 19)
-#define OMAP4_USB2PHY_DATADET_SHIFT 18
-#define OMAP4_USB2PHY_DATADET_MASK (1 << 18)
-#define OMAP4_USB2PHY_SINKONDP_SHIFT 17
-#define OMAP4_USB2PHY_SINKONDP_MASK (1 << 17)
-#define OMAP4_USB2PHY_SRCONDM_SHIFT 16
-#define OMAP4_USB2PHY_SRCONDM_MASK (1 << 16)
-#define OMAP4_USB2PHY_RESTARTCHGDET_SHIFT 15
-#define OMAP4_USB2PHY_RESTARTCHGDET_MASK (1 << 15)
-#define OMAP4_USB2PHY_CHGDETDONE_SHIFT 14
-#define OMAP4_USB2PHY_CHGDETDONE_MASK (1 << 14)
-#define OMAP4_USB2PHY_CHGDETECTED_SHIFT 13
-#define OMAP4_USB2PHY_CHGDETECTED_MASK (1 << 13)
-#define OMAP4_USB2PHY_MCPCPUEN_SHIFT 12
-#define OMAP4_USB2PHY_MCPCPUEN_MASK (1 << 12)
-#define OMAP4_USB2PHY_MCPCMODEEN_SHIFT 11
-#define OMAP4_USB2PHY_MCPCMODEEN_MASK (1 << 11)
-#define OMAP4_USB2PHY_RESETDONEMCLK_SHIFT 10
-#define OMAP4_USB2PHY_RESETDONEMCLK_MASK (1 << 10)
-#define OMAP4_USB2PHY_UTMIRESETDONE_SHIFT 9
-#define OMAP4_USB2PHY_UTMIRESETDONE_MASK (1 << 9)
-#define OMAP4_USB2PHY_TXBITSTUFFENABLE_SHIFT 8
-#define OMAP4_USB2PHY_TXBITSTUFFENABLE_MASK (1 << 8)
-#define OMAP4_USB2PHY_DATAPOLARITYN_SHIFT 7
-#define OMAP4_USB2PHY_DATAPOLARITYN_MASK (1 << 7)
-#define OMAP4_USBDPLL_FREQLOCK_SHIFT 6
-#define OMAP4_USBDPLL_FREQLOCK_MASK (1 << 6)
-#define OMAP4_USB2PHY_RESETDONETCLK_SHIFT 5
-#define OMAP4_USB2PHY_RESETDONETCLK_MASK (1 << 5)
-
-/* CONTROL_I2C_1 */
-#define OMAP4_HDMI_DDC_SDA_GLFENB_SHIFT 31
-#define OMAP4_HDMI_DDC_SDA_GLFENB_MASK (1 << 31)
-#define OMAP4_HDMI_DDC_SDA_LOAD_BITS_SHIFT 29
-#define OMAP4_HDMI_DDC_SDA_LOAD_BITS_MASK (0x3 << 29)
-#define OMAP4_HDMI_DDC_SDA_PULLUPRESX_SHIFT 28
-#define OMAP4_HDMI_DDC_SDA_PULLUPRESX_MASK (1 << 28)
-#define OMAP4_HDMI_DDC_SCL_GLFENB_SHIFT 27
-#define OMAP4_HDMI_DDC_SCL_GLFENB_MASK (1 << 27)
-#define OMAP4_HDMI_DDC_SCL_LOAD_BITS_SHIFT 25
-#define OMAP4_HDMI_DDC_SCL_LOAD_BITS_MASK (0x3 << 25)
-#define OMAP4_HDMI_DDC_SCL_PULLUPRESX_SHIFT 24
-#define OMAP4_HDMI_DDC_SCL_PULLUPRESX_MASK (1 << 24)
-#define OMAP4_HDMI_DDC_SDA_HSMODE_SHIFT 23
-#define OMAP4_HDMI_DDC_SDA_HSMODE_MASK (1 << 23)
-#define OMAP4_HDMI_DDC_SDA_NMODE_SHIFT 22
-#define OMAP4_HDMI_DDC_SDA_NMODE_MASK (1 << 22)
-#define OMAP4_HDMI_DDC_SCL_HSMODE_SHIFT 21
-#define OMAP4_HDMI_DDC_SCL_HSMODE_MASK (1 << 21)
-#define OMAP4_HDMI_DDC_SCL_NMODE_SHIFT 20
-#define OMAP4_HDMI_DDC_SCL_NMODE_MASK (1 << 20)
-
-/* CONTROL_MMC1 */
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP0_SHIFT 31
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP0_MASK (1 << 31)
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP1_SHIFT 30
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP1_MASK (1 << 30)
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP2_SHIFT 29
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP2_MASK (1 << 29)
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP3_SHIFT 28
-#define OMAP4_SDMMC1_PUSTRENGTH_GRP3_MASK (1 << 28)
-#define OMAP4_SDMMC1_DR0_SPEEDCTRL_SHIFT 27
-#define OMAP4_SDMMC1_DR0_SPEEDCTRL_MASK (1 << 27)
-#define OMAP4_SDMMC1_DR1_SPEEDCTRL_SHIFT 26
-#define OMAP4_SDMMC1_DR1_SPEEDCTRL_MASK (1 << 26)
-#define OMAP4_SDMMC1_DR2_SPEEDCTRL_SHIFT 25
-#define OMAP4_SDMMC1_DR2_SPEEDCTRL_MASK (1 << 25)
-#define OMAP4_USBC1_DR0_SPEEDCTRL_SHIFT 24
-#define OMAP4_USBC1_DR0_SPEEDCTRL_MASK (1 << 24)
-#define OMAP4_USB_FD_CDEN_SHIFT 23
-#define OMAP4_USB_FD_CDEN_MASK (1 << 23)
-#define OMAP4_USBC1_ICUSB_DP_PDDIS_SHIFT 22
-#define OMAP4_USBC1_ICUSB_DP_PDDIS_MASK (1 << 22)
-#define OMAP4_USBC1_ICUSB_DM_PDDIS_SHIFT 21
-#define OMAP4_USBC1_ICUSB_DM_PDDIS_MASK (1 << 21)
-
-/* CONTROL_HSI */
-#define OMAP4_HSI1_CALLOOP_SEL_SHIFT 31
-#define OMAP4_HSI1_CALLOOP_SEL_MASK (1 << 31)
-#define OMAP4_HSI1_CALMUX_SEL_SHIFT 30
-#define OMAP4_HSI1_CALMUX_SEL_MASK (1 << 30)
-#define OMAP4_HSI2_CALLOOP_SEL_SHIFT 29
-#define OMAP4_HSI2_CALLOOP_SEL_MASK (1 << 29)
-#define OMAP4_HSI2_CALMUX_SEL_SHIFT 28
-#define OMAP4_HSI2_CALMUX_SEL_MASK (1 << 28)
-
-/* CONTROL_USB */
-#define OMAP4_CARKIT_USBA0_ULPIPHY_DAT0_AUTO_EN_SHIFT 31
-#define OMAP4_CARKIT_USBA0_ULPIPHY_DAT0_AUTO_EN_MASK (1 << 31)
-#define OMAP4_CARKIT_USBA0_ULPIPHY_DAT1_AUTO_EN_SHIFT 30
-#define OMAP4_CARKIT_USBA0_ULPIPHY_DAT1_AUTO_EN_MASK (1 << 30)
-
-/* CONTROL_HDQ */
-#define OMAP4_HDQ_SIO_PWRDNZ_SHIFT 31
-#define OMAP4_HDQ_SIO_PWRDNZ_MASK (1 << 31)
-
-/* CONTROL_LPDDR2IO1_0 */
-#define OMAP4_LPDDR2IO1_GR4_SR_SHIFT 30
-#define OMAP4_LPDDR2IO1_GR4_SR_MASK (0x3 << 30)
-#define OMAP4_LPDDR2IO1_GR4_I_SHIFT 27
-#define OMAP4_LPDDR2IO1_GR4_I_MASK (0x7 << 27)
-#define OMAP4_LPDDR2IO1_GR4_WD_SHIFT 25
-#define OMAP4_LPDDR2IO1_GR4_WD_MASK (0x3 << 25)
-#define OMAP4_LPDDR2IO1_GR3_SR_SHIFT 22
-#define OMAP4_LPDDR2IO1_GR3_SR_MASK (0x3 << 22)
-#define OMAP4_LPDDR2IO1_GR3_I_SHIFT 19
-#define OMAP4_LPDDR2IO1_GR3_I_MASK (0x7 << 19)
-#define OMAP4_LPDDR2IO1_GR3_WD_SHIFT 17
-#define OMAP4_LPDDR2IO1_GR3_WD_MASK (0x3 << 17)
-#define OMAP4_LPDDR2IO1_GR2_SR_SHIFT 14
-#define OMAP4_LPDDR2IO1_GR2_SR_MASK (0x3 << 14)
-#define OMAP4_LPDDR2IO1_GR2_I_SHIFT 11
-#define OMAP4_LPDDR2IO1_GR2_I_MASK (0x7 << 11)
-#define OMAP4_LPDDR2IO1_GR2_WD_SHIFT 9
-#define OMAP4_LPDDR2IO1_GR2_WD_MASK (0x3 << 9)
-#define OMAP4_LPDDR2IO1_GR1_SR_SHIFT 6
-#define OMAP4_LPDDR2IO1_GR1_SR_MASK (0x3 << 6)
-#define OMAP4_LPDDR2IO1_GR1_I_SHIFT 3
-#define OMAP4_LPDDR2IO1_GR1_I_MASK (0x7 << 3)
-#define OMAP4_LPDDR2IO1_GR1_WD_SHIFT 1
-#define OMAP4_LPDDR2IO1_GR1_WD_MASK (0x3 << 1)
-
-/* CONTROL_LPDDR2IO1_1 */
-#define OMAP4_LPDDR2IO1_GR8_SR_SHIFT 30
-#define OMAP4_LPDDR2IO1_GR8_SR_MASK (0x3 << 30)
-#define OMAP4_LPDDR2IO1_GR8_I_SHIFT 27
-#define OMAP4_LPDDR2IO1_GR8_I_MASK (0x7 << 27)
-#define OMAP4_LPDDR2IO1_GR8_WD_SHIFT 25
-#define OMAP4_LPDDR2IO1_GR8_WD_MASK (0x3 << 25)
-#define OMAP4_LPDDR2IO1_GR7_SR_SHIFT 22
-#define OMAP4_LPDDR2IO1_GR7_SR_MASK (0x3 << 22)
-#define OMAP4_LPDDR2IO1_GR7_I_SHIFT 19
-#define OMAP4_LPDDR2IO1_GR7_I_MASK (0x7 << 19)
-#define OMAP4_LPDDR2IO1_GR7_WD_SHIFT 17
-#define OMAP4_LPDDR2IO1_GR7_WD_MASK (0x3 << 17)
-#define OMAP4_LPDDR2IO1_GR6_SR_SHIFT 14
-#define OMAP4_LPDDR2IO1_GR6_SR_MASK (0x3 << 14)
-#define OMAP4_LPDDR2IO1_GR6_I_SHIFT 11
-#define OMAP4_LPDDR2IO1_GR6_I_MASK (0x7 << 11)
-#define OMAP4_LPDDR2IO1_GR6_WD_SHIFT 9
-#define OMAP4_LPDDR2IO1_GR6_WD_MASK (0x3 << 9)
-#define OMAP4_LPDDR2IO1_GR5_SR_SHIFT 6
-#define OMAP4_LPDDR2IO1_GR5_SR_MASK (0x3 << 6)
-#define OMAP4_LPDDR2IO1_GR5_I_SHIFT 3
-#define OMAP4_LPDDR2IO1_GR5_I_MASK (0x7 << 3)
-#define OMAP4_LPDDR2IO1_GR5_WD_SHIFT 1
-#define OMAP4_LPDDR2IO1_GR5_WD_MASK (0x3 << 1)
-
-/* CONTROL_LPDDR2IO1_2 */
-#define OMAP4_LPDDR2IO1_GR11_SR_SHIFT 30
-#define OMAP4_LPDDR2IO1_GR11_SR_MASK (0x3 << 30)
-#define OMAP4_LPDDR2IO1_GR11_I_SHIFT 27
-#define OMAP4_LPDDR2IO1_GR11_I_MASK (0x7 << 27)
-#define OMAP4_LPDDR2IO1_GR11_WD_SHIFT 25
-#define OMAP4_LPDDR2IO1_GR11_WD_MASK (0x3 << 25)
-#define OMAP4_LPDDR2IO1_GR10_SR_SHIFT 22
-#define OMAP4_LPDDR2IO1_GR10_SR_MASK (0x3 << 22)
-#define OMAP4_LPDDR2IO1_GR10_I_SHIFT 19
-#define OMAP4_LPDDR2IO1_GR10_I_MASK (0x7 << 19)
-#define OMAP4_LPDDR2IO1_GR10_WD_SHIFT 17
-#define OMAP4_LPDDR2IO1_GR10_WD_MASK (0x3 << 17)
-#define OMAP4_LPDDR2IO1_GR9_SR_SHIFT 14
-#define OMAP4_LPDDR2IO1_GR9_SR_MASK (0x3 << 14)
-#define OMAP4_LPDDR2IO1_GR9_I_SHIFT 11
-#define OMAP4_LPDDR2IO1_GR9_I_MASK (0x7 << 11)
-#define OMAP4_LPDDR2IO1_GR9_WD_SHIFT 9
-#define OMAP4_LPDDR2IO1_GR9_WD_MASK (0x3 << 9)
-
-/* CONTROL_LPDDR2IO1_3 */
-#define OMAP4_LPDDR21_VREF_CA_CCAP0_SHIFT 31
-#define OMAP4_LPDDR21_VREF_CA_CCAP0_MASK (1 << 31)
-#define OMAP4_LPDDR21_VREF_CA_CCAP1_SHIFT 30
-#define OMAP4_LPDDR21_VREF_CA_CCAP1_MASK (1 << 30)
-#define OMAP4_LPDDR21_VREF_CA_INT_CCAP0_SHIFT 29
-#define OMAP4_LPDDR21_VREF_CA_INT_CCAP0_MASK (1 << 29)
-#define OMAP4_LPDDR21_VREF_CA_INT_CCAP1_SHIFT 28
-#define OMAP4_LPDDR21_VREF_CA_INT_CCAP1_MASK (1 << 28)
-#define OMAP4_LPDDR21_VREF_CA_INT_TAP0_SHIFT 27
-#define OMAP4_LPDDR21_VREF_CA_INT_TAP0_MASK (1 << 27)
-#define OMAP4_LPDDR21_VREF_CA_INT_TAP1_SHIFT 26
-#define OMAP4_LPDDR21_VREF_CA_INT_TAP1_MASK (1 << 26)
-#define OMAP4_LPDDR21_VREF_CA_TAP0_SHIFT 25
-#define OMAP4_LPDDR21_VREF_CA_TAP0_MASK (1 << 25)
-#define OMAP4_LPDDR21_VREF_CA_TAP1_SHIFT 24
-#define OMAP4_LPDDR21_VREF_CA_TAP1_MASK (1 << 24)
-#define OMAP4_LPDDR21_VREF_DQ0_INT_CCAP0_SHIFT 23
-#define OMAP4_LPDDR21_VREF_DQ0_INT_CCAP0_MASK (1 << 23)
-#define OMAP4_LPDDR21_VREF_DQ0_INT_CCAP1_SHIFT 22
-#define OMAP4_LPDDR21_VREF_DQ0_INT_CCAP1_MASK (1 << 22)
-#define OMAP4_LPDDR21_VREF_DQ0_INT_TAP0_SHIFT 21
-#define OMAP4_LPDDR21_VREF_DQ0_INT_TAP0_MASK (1 << 21)
-#define OMAP4_LPDDR21_VREF_DQ0_INT_TAP1_SHIFT 20
-#define OMAP4_LPDDR21_VREF_DQ0_INT_TAP1_MASK (1 << 20)
-#define OMAP4_LPDDR21_VREF_DQ1_INT_CCAP0_SHIFT 19
-#define OMAP4_LPDDR21_VREF_DQ1_INT_CCAP0_MASK (1 << 19)
-#define OMAP4_LPDDR21_VREF_DQ1_INT_CCAP1_SHIFT 18
-#define OMAP4_LPDDR21_VREF_DQ1_INT_CCAP1_MASK (1 << 18)
-#define OMAP4_LPDDR21_VREF_DQ1_INT_TAP0_SHIFT 17
-#define OMAP4_LPDDR21_VREF_DQ1_INT_TAP0_MASK (1 << 17)
-#define OMAP4_LPDDR21_VREF_DQ1_INT_TAP1_SHIFT 16
-#define OMAP4_LPDDR21_VREF_DQ1_INT_TAP1_MASK (1 << 16)
-#define OMAP4_LPDDR21_VREF_DQ_CCAP0_SHIFT 15
-#define OMAP4_LPDDR21_VREF_DQ_CCAP0_MASK (1 << 15)
-#define OMAP4_LPDDR21_VREF_DQ_CCAP1_SHIFT 14
-#define OMAP4_LPDDR21_VREF_DQ_CCAP1_MASK (1 << 14)
-#define OMAP4_LPDDR21_VREF_DQ_TAP0_SHIFT 13
-#define OMAP4_LPDDR21_VREF_DQ_TAP0_MASK (1 << 13)
-#define OMAP4_LPDDR21_VREF_DQ_TAP1_SHIFT 12
-#define OMAP4_LPDDR21_VREF_DQ_TAP1_MASK (1 << 12)
-
-/* CONTROL_LPDDR2IO2_0 */
-#define OMAP4_LPDDR2IO2_GR4_SR_SHIFT 30
-#define OMAP4_LPDDR2IO2_GR4_SR_MASK (0x3 << 30)
-#define OMAP4_LPDDR2IO2_GR4_I_SHIFT 27
-#define OMAP4_LPDDR2IO2_GR4_I_MASK (0x7 << 27)
-#define OMAP4_LPDDR2IO2_GR4_WD_SHIFT 25
-#define OMAP4_LPDDR2IO2_GR4_WD_MASK (0x3 << 25)
-#define OMAP4_LPDDR2IO2_GR3_SR_SHIFT 22
-#define OMAP4_LPDDR2IO2_GR3_SR_MASK (0x3 << 22)
-#define OMAP4_LPDDR2IO2_GR3_I_SHIFT 19
-#define OMAP4_LPDDR2IO2_GR3_I_MASK (0x7 << 19)
-#define OMAP4_LPDDR2IO2_GR3_WD_SHIFT 17
-#define OMAP4_LPDDR2IO2_GR3_WD_MASK (0x3 << 17)
-#define OMAP4_LPDDR2IO2_GR2_SR_SHIFT 14
-#define OMAP4_LPDDR2IO2_GR2_SR_MASK (0x3 << 14)
-#define OMAP4_LPDDR2IO2_GR2_I_SHIFT 11
-#define OMAP4_LPDDR2IO2_GR2_I_MASK (0x7 << 11)
-#define OMAP4_LPDDR2IO2_GR2_WD_SHIFT 9
-#define OMAP4_LPDDR2IO2_GR2_WD_MASK (0x3 << 9)
-#define OMAP4_LPDDR2IO2_GR1_SR_SHIFT 6
-#define OMAP4_LPDDR2IO2_GR1_SR_MASK (0x3 << 6)
-#define OMAP4_LPDDR2IO2_GR1_I_SHIFT 3
-#define OMAP4_LPDDR2IO2_GR1_I_MASK (0x7 << 3)
-#define OMAP4_LPDDR2IO2_GR1_WD_SHIFT 1
-#define OMAP4_LPDDR2IO2_GR1_WD_MASK (0x3 << 1)
-
-/* CONTROL_LPDDR2IO2_1 */
-#define OMAP4_LPDDR2IO2_GR8_SR_SHIFT 30
-#define OMAP4_LPDDR2IO2_GR8_SR_MASK (0x3 << 30)
-#define OMAP4_LPDDR2IO2_GR8_I_SHIFT 27
-#define OMAP4_LPDDR2IO2_GR8_I_MASK (0x7 << 27)
-#define OMAP4_LPDDR2IO2_GR8_WD_SHIFT 25
-#define OMAP4_LPDDR2IO2_GR8_WD_MASK (0x3 << 25)
-#define OMAP4_LPDDR2IO2_GR7_SR_SHIFT 22
-#define OMAP4_LPDDR2IO2_GR7_SR_MASK (0x3 << 22)
-#define OMAP4_LPDDR2IO2_GR7_I_SHIFT 19
-#define OMAP4_LPDDR2IO2_GR7_I_MASK (0x7 << 19)
-#define OMAP4_LPDDR2IO2_GR7_WD_SHIFT 17
-#define OMAP4_LPDDR2IO2_GR7_WD_MASK (0x3 << 17)
-#define OMAP4_LPDDR2IO2_GR6_SR_SHIFT 14
-#define OMAP4_LPDDR2IO2_GR6_SR_MASK (0x3 << 14)
-#define OMAP4_LPDDR2IO2_GR6_I_SHIFT 11
-#define OMAP4_LPDDR2IO2_GR6_I_MASK (0x7 << 11)
-#define OMAP4_LPDDR2IO2_GR6_WD_SHIFT 9
-#define OMAP4_LPDDR2IO2_GR6_WD_MASK (0x3 << 9)
-#define OMAP4_LPDDR2IO2_GR5_SR_SHIFT 6
-#define OMAP4_LPDDR2IO2_GR5_SR_MASK (0x3 << 6)
-#define OMAP4_LPDDR2IO2_GR5_I_SHIFT 3
-#define OMAP4_LPDDR2IO2_GR5_I_MASK (0x7 << 3)
-#define OMAP4_LPDDR2IO2_GR5_WD_SHIFT 1
-#define OMAP4_LPDDR2IO2_GR5_WD_MASK (0x3 << 1)
-
-/* CONTROL_LPDDR2IO2_2 */
-#define OMAP4_LPDDR2IO2_GR11_SR_SHIFT 30
-#define OMAP4_LPDDR2IO2_GR11_SR_MASK (0x3 << 30)
-#define OMAP4_LPDDR2IO2_GR11_I_SHIFT 27
-#define OMAP4_LPDDR2IO2_GR11_I_MASK (0x7 << 27)
-#define OMAP4_LPDDR2IO2_GR11_WD_SHIFT 25
-#define OMAP4_LPDDR2IO2_GR11_WD_MASK (0x3 << 25)
-#define OMAP4_LPDDR2IO2_GR10_SR_SHIFT 22
-#define OMAP4_LPDDR2IO2_GR10_SR_MASK (0x3 << 22)
-#define OMAP4_LPDDR2IO2_GR10_I_SHIFT 19
-#define OMAP4_LPDDR2IO2_GR10_I_MASK (0x7 << 19)
-#define OMAP4_LPDDR2IO2_GR10_WD_SHIFT 17
-#define OMAP4_LPDDR2IO2_GR10_WD_MASK (0x3 << 17)
-#define OMAP4_LPDDR2IO2_GR9_SR_SHIFT 14
-#define OMAP4_LPDDR2IO2_GR9_SR_MASK (0x3 << 14)
-#define OMAP4_LPDDR2IO2_GR9_I_SHIFT 11
-#define OMAP4_LPDDR2IO2_GR9_I_MASK (0x7 << 11)
-#define OMAP4_LPDDR2IO2_GR9_WD_SHIFT 9
-#define OMAP4_LPDDR2IO2_GR9_WD_MASK (0x3 << 9)
-
-/* CONTROL_LPDDR2IO2_3 */
-#define OMAP4_LPDDR22_VREF_CA_CCAP0_SHIFT 31
-#define OMAP4_LPDDR22_VREF_CA_CCAP0_MASK (1 << 31)
-#define OMAP4_LPDDR22_VREF_CA_CCAP1_SHIFT 30
-#define OMAP4_LPDDR22_VREF_CA_CCAP1_MASK (1 << 30)
-#define OMAP4_LPDDR22_VREF_CA_INT_CCAP0_SHIFT 29
-#define OMAP4_LPDDR22_VREF_CA_INT_CCAP0_MASK (1 << 29)
-#define OMAP4_LPDDR22_VREF_CA_INT_CCAP1_SHIFT 28
-#define OMAP4_LPDDR22_VREF_CA_INT_CCAP1_MASK (1 << 28)
-#define OMAP4_LPDDR22_VREF_CA_INT_TAP0_SHIFT 27
-#define OMAP4_LPDDR22_VREF_CA_INT_TAP0_MASK (1 << 27)
-#define OMAP4_LPDDR22_VREF_CA_INT_TAP1_SHIFT 26
-#define OMAP4_LPDDR22_VREF_CA_INT_TAP1_MASK (1 << 26)
-#define OMAP4_LPDDR22_VREF_CA_TAP0_SHIFT 25
-#define OMAP4_LPDDR22_VREF_CA_TAP0_MASK (1 << 25)
-#define OMAP4_LPDDR22_VREF_CA_TAP1_SHIFT 24
-#define OMAP4_LPDDR22_VREF_CA_TAP1_MASK (1 << 24)
-#define OMAP4_LPDDR22_VREF_DQ0_INT_CCAP0_SHIFT 23
-#define OMAP4_LPDDR22_VREF_DQ0_INT_CCAP0_MASK (1 << 23)
-#define OMAP4_LPDDR22_VREF_DQ0_INT_CCAP1_SHIFT 22
-#define OMAP4_LPDDR22_VREF_DQ0_INT_CCAP1_MASK (1 << 22)
-#define OMAP4_LPDDR22_VREF_DQ0_INT_TAP0_SHIFT 21
-#define OMAP4_LPDDR22_VREF_DQ0_INT_TAP0_MASK (1 << 21)
-#define OMAP4_LPDDR22_VREF_DQ0_INT_TAP1_SHIFT 20
-#define OMAP4_LPDDR22_VREF_DQ0_INT_TAP1_MASK (1 << 20)
-#define OMAP4_LPDDR22_VREF_DQ1_INT_CCAP0_SHIFT 19
-#define OMAP4_LPDDR22_VREF_DQ1_INT_CCAP0_MASK (1 << 19)
-#define OMAP4_LPDDR22_VREF_DQ1_INT_CCAP1_SHIFT 18
-#define OMAP4_LPDDR22_VREF_DQ1_INT_CCAP1_MASK (1 << 18)
-#define OMAP4_LPDDR22_VREF_DQ1_INT_TAP0_SHIFT 17
-#define OMAP4_LPDDR22_VREF_DQ1_INT_TAP0_MASK (1 << 17)
-#define OMAP4_LPDDR22_VREF_DQ1_INT_TAP1_SHIFT 16
-#define OMAP4_LPDDR22_VREF_DQ1_INT_TAP1_MASK (1 << 16)
-#define OMAP4_LPDDR22_VREF_DQ_CCAP0_SHIFT 15
-#define OMAP4_LPDDR22_VREF_DQ_CCAP0_MASK (1 << 15)
-#define OMAP4_LPDDR22_VREF_DQ_CCAP1_SHIFT 14
-#define OMAP4_LPDDR22_VREF_DQ_CCAP1_MASK (1 << 14)
-#define OMAP4_LPDDR22_VREF_DQ_TAP0_SHIFT 13
-#define OMAP4_LPDDR22_VREF_DQ_TAP0_MASK (1 << 13)
-#define OMAP4_LPDDR22_VREF_DQ_TAP1_SHIFT 12
-#define OMAP4_LPDDR22_VREF_DQ_TAP1_MASK (1 << 12)
-
-/* CONTROL_BUS_HOLD */
-#define OMAP4_ABE_DMIC_DIN3_EN_SHIFT 31
-#define OMAP4_ABE_DMIC_DIN3_EN_MASK (1 << 31)
-#define OMAP4_MCSPI1_CS3_EN_SHIFT 30
-#define OMAP4_MCSPI1_CS3_EN_MASK (1 << 30)
-
-/* CONTROL_C2C */
-#define OMAP4_MIRROR_MODE_EN_SHIFT 31
-#define OMAP4_MIRROR_MODE_EN_MASK (1 << 31)
-#define OMAP4_C2C_SPARE_SHIFT 24
-#define OMAP4_C2C_SPARE_MASK (0x7f << 24)
-
-/* CORE_CONTROL_SPARE_RW */
-#define OMAP4_CORE_CONTROL_SPARE_RW_SHIFT 0
-#define OMAP4_CORE_CONTROL_SPARE_RW_MASK (0xffffffff << 0)
-
-/* CORE_CONTROL_SPARE_R */
-#define OMAP4_CORE_CONTROL_SPARE_R_SHIFT 0
-#define OMAP4_CORE_CONTROL_SPARE_R_MASK (0xffffffff << 0)
-
-/* CORE_CONTROL_SPARE_R_C0 */
-#define OMAP4_CORE_CONTROL_SPARE_R_C0_SHIFT 31
-#define OMAP4_CORE_CONTROL_SPARE_R_C0_MASK (1 << 31)
-#define OMAP4_CORE_CONTROL_SPARE_R_C1_SHIFT 30
-#define OMAP4_CORE_CONTROL_SPARE_R_C1_MASK (1 << 30)
-#define OMAP4_CORE_CONTROL_SPARE_R_C2_SHIFT 29
-#define OMAP4_CORE_CONTROL_SPARE_R_C2_MASK (1 << 29)
-#define OMAP4_CORE_CONTROL_SPARE_R_C3_SHIFT 28
-#define OMAP4_CORE_CONTROL_SPARE_R_C3_MASK (1 << 28)
-#define OMAP4_CORE_CONTROL_SPARE_R_C4_SHIFT 27
-#define OMAP4_CORE_CONTROL_SPARE_R_C4_MASK (1 << 27)
-#define OMAP4_CORE_CONTROL_SPARE_R_C5_SHIFT 26
-#define OMAP4_CORE_CONTROL_SPARE_R_C5_MASK (1 << 26)
-#define OMAP4_CORE_CONTROL_SPARE_R_C6_SHIFT 25
-#define OMAP4_CORE_CONTROL_SPARE_R_C6_MASK (1 << 25)
-#define OMAP4_CORE_CONTROL_SPARE_R_C7_SHIFT 24
-#define OMAP4_CORE_CONTROL_SPARE_R_C7_MASK (1 << 24)
-
-/* CONTROL_EFUSE_1 */
-#define OMAP4_AVDAC_TRIM_BYTE3_SHIFT 24
-#define OMAP4_AVDAC_TRIM_BYTE3_MASK (0x7f << 24)
-#define OMAP4_AVDAC_TRIM_BYTE2_SHIFT 16
-#define OMAP4_AVDAC_TRIM_BYTE2_MASK (0xff << 16)
-#define OMAP4_AVDAC_TRIM_BYTE1_SHIFT 8
-#define OMAP4_AVDAC_TRIM_BYTE1_MASK (0xff << 8)
-#define OMAP4_AVDAC_TRIM_BYTE0_SHIFT 0
-#define OMAP4_AVDAC_TRIM_BYTE0_MASK (0xff << 0)
-
-/* CONTROL_EFUSE_2 */
-#define OMAP4_EFUSE_SMART2TEST_P0_SHIFT 31
-#define OMAP4_EFUSE_SMART2TEST_P0_MASK (1 << 31)
-#define OMAP4_EFUSE_SMART2TEST_P1_SHIFT 30
-#define OMAP4_EFUSE_SMART2TEST_P1_MASK (1 << 30)
-#define OMAP4_EFUSE_SMART2TEST_P2_SHIFT 29
-#define OMAP4_EFUSE_SMART2TEST_P2_MASK (1 << 29)
-#define OMAP4_EFUSE_SMART2TEST_P3_SHIFT 28
-#define OMAP4_EFUSE_SMART2TEST_P3_MASK (1 << 28)
-#define OMAP4_EFUSE_SMART2TEST_N0_SHIFT 27
-#define OMAP4_EFUSE_SMART2TEST_N0_MASK (1 << 27)
-#define OMAP4_EFUSE_SMART2TEST_N1_SHIFT 26
-#define OMAP4_EFUSE_SMART2TEST_N1_MASK (1 << 26)
-#define OMAP4_EFUSE_SMART2TEST_N2_SHIFT 25
-#define OMAP4_EFUSE_SMART2TEST_N2_MASK (1 << 25)
-#define OMAP4_EFUSE_SMART2TEST_N3_SHIFT 24
-#define OMAP4_EFUSE_SMART2TEST_N3_MASK (1 << 24)
-#define OMAP4_LPDDR2_PTV_N1_SHIFT 23
-#define OMAP4_LPDDR2_PTV_N1_MASK (1 << 23)
-#define OMAP4_LPDDR2_PTV_N2_SHIFT 22
-#define OMAP4_LPDDR2_PTV_N2_MASK (1 << 22)
-#define OMAP4_LPDDR2_PTV_N3_SHIFT 21
-#define OMAP4_LPDDR2_PTV_N3_MASK (1 << 21)
-#define OMAP4_LPDDR2_PTV_N4_SHIFT 20
-#define OMAP4_LPDDR2_PTV_N4_MASK (1 << 20)
-#define OMAP4_LPDDR2_PTV_N5_SHIFT 19
-#define OMAP4_LPDDR2_PTV_N5_MASK (1 << 19)
-#define OMAP4_LPDDR2_PTV_P1_SHIFT 18
-#define OMAP4_LPDDR2_PTV_P1_MASK (1 << 18)
-#define OMAP4_LPDDR2_PTV_P2_SHIFT 17
-#define OMAP4_LPDDR2_PTV_P2_MASK (1 << 17)
-#define OMAP4_LPDDR2_PTV_P3_SHIFT 16
-#define OMAP4_LPDDR2_PTV_P3_MASK (1 << 16)
-#define OMAP4_LPDDR2_PTV_P4_SHIFT 15
-#define OMAP4_LPDDR2_PTV_P4_MASK (1 << 15)
-#define OMAP4_LPDDR2_PTV_P5_SHIFT 14
-#define OMAP4_LPDDR2_PTV_P5_MASK (1 << 14)
-
-/* CONTROL_EFUSE_3 */
-#define OMAP4_STD_FUSE_SPARE_1_SHIFT 24
-#define OMAP4_STD_FUSE_SPARE_1_MASK (0xff << 24)
-#define OMAP4_STD_FUSE_SPARE_2_SHIFT 16
-#define OMAP4_STD_FUSE_SPARE_2_MASK (0xff << 16)
-#define OMAP4_STD_FUSE_SPARE_3_SHIFT 8
-#define OMAP4_STD_FUSE_SPARE_3_MASK (0xff << 8)
-#define OMAP4_STD_FUSE_SPARE_4_SHIFT 0
-#define OMAP4_STD_FUSE_SPARE_4_MASK (0xff << 0)
-
-/* CONTROL_EFUSE_4 */
-#define OMAP4_STD_FUSE_SPARE_5_SHIFT 24
-#define OMAP4_STD_FUSE_SPARE_5_MASK (0xff << 24)
-#define OMAP4_STD_FUSE_SPARE_6_SHIFT 16
-#define OMAP4_STD_FUSE_SPARE_6_MASK (0xff << 16)
-#define OMAP4_STD_FUSE_SPARE_7_SHIFT 8
-#define OMAP4_STD_FUSE_SPARE_7_MASK (0xff << 8)
-#define OMAP4_STD_FUSE_SPARE_8_SHIFT 0
-#define OMAP4_STD_FUSE_SPARE_8_MASK (0xff << 0)
-
-#endif
diff --git a/arch/arm/mach-omap2/include/mach/ctrl_module_pad_wkup_44xx.h b/arch/arm/mach-omap2/include/mach/ctrl_module_pad_wkup_44xx.h
deleted file mode 100644
index 17c9b37..0000000
--- a/arch/arm/mach-omap2/include/mach/ctrl_module_pad_wkup_44xx.h
+++ /dev/null
@@ -1,236 +0,0 @@
-/*
- * OMAP44xx CTRL_MODULE_PAD_WKUP registers and bitfields
- *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
- *
- * Benoit Cousson (b-cousson@ti.com)
- * Santosh Shilimkar (santosh.shilimkar@ti.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_PAD_WKUP_44XX_H
-#define __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_PAD_WKUP_44XX_H
-
-
-/* Base address */
-#define OMAP4_CTRL_MODULE_PAD_WKUP 0x4a31e000
-
-/* Registers offset */
-#define OMAP4_CTRL_MODULE_PAD_WKUP_IP_REVISION 0x0000
-#define OMAP4_CTRL_MODULE_PAD_WKUP_IP_HWINFO 0x0004
-#define OMAP4_CTRL_MODULE_PAD_WKUP_IP_SYSCONFIG 0x0010
-#define OMAP4_CTRL_MODULE_PAD_WKUP_PADCONF_WAKEUPEVENT_0 0x007c
-#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_SMART1NOPMIO_PADCONF_0 0x05a0
-#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_SMART1NOPMIO_PADCONF_1 0x05a4
-#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_PADCONF_MODE 0x05a8
-#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_XTAL_OSCILLATOR 0x05ac
-#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_USIMIO 0x0600
-#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_I2C_2 0x0604
-#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_JTAG 0x0608
-#define OMAP4_CTRL_MODULE_PAD_WKUP_CONTROL_SYS 0x060c
-#define OMAP4_CTRL_MODULE_PAD_WKUP_WKUP_CONTROL_SPARE_RW 0x0614
-#define OMAP4_CTRL_MODULE_PAD_WKUP_WKUP_CONTROL_SPARE_R 0x0618
-#define OMAP4_CTRL_MODULE_PAD_WKUP_WKUP_CONTROL_SPARE_R_C0 0x061c
-
-/* Registers shifts and masks */
-
-/* IP_REVISION */
-#define OMAP4_IP_REV_SCHEME_SHIFT 30
-#define OMAP4_IP_REV_SCHEME_MASK (0x3 << 30)
-#define OMAP4_IP_REV_FUNC_SHIFT 16
-#define OMAP4_IP_REV_FUNC_MASK (0xfff << 16)
-#define OMAP4_IP_REV_RTL_SHIFT 11
-#define OMAP4_IP_REV_RTL_MASK (0x1f << 11)
-#define OMAP4_IP_REV_MAJOR_SHIFT 8
-#define OMAP4_IP_REV_MAJOR_MASK (0x7 << 8)
-#define OMAP4_IP_REV_CUSTOM_SHIFT 6
-#define OMAP4_IP_REV_CUSTOM_MASK (0x3 << 6)
-#define OMAP4_IP_REV_MINOR_SHIFT 0
-#define OMAP4_IP_REV_MINOR_MASK (0x3f << 0)
-
-/* IP_HWINFO */
-#define OMAP4_IP_HWINFO_SHIFT 0
-#define OMAP4_IP_HWINFO_MASK (0xffffffff << 0)
-
-/* IP_SYSCONFIG */
-#define OMAP4_IP_SYSCONFIG_IDLEMODE_SHIFT 2
-#define OMAP4_IP_SYSCONFIG_IDLEMODE_MASK (0x3 << 2)
-
-/* PADCONF_WAKEUPEVENT_0 */
-#define OMAP4_JTAG_TDO_DUPLICATEWAKEUPEVENT_SHIFT 24
-#define OMAP4_JTAG_TDO_DUPLICATEWAKEUPEVENT_MASK (1 << 24)
-#define OMAP4_JTAG_TDI_DUPLICATEWAKEUPEVENT_SHIFT 23
-#define OMAP4_JTAG_TDI_DUPLICATEWAKEUPEVENT_MASK (1 << 23)
-#define OMAP4_JTAG_TMS_TMSC_DUPLICATEWAKEUPEVENT_SHIFT 22
-#define OMAP4_JTAG_TMS_TMSC_DUPLICATEWAKEUPEVENT_MASK (1 << 22)
-#define OMAP4_JTAG_RTCK_DUPLICATEWAKEUPEVENT_SHIFT 21
-#define OMAP4_JTAG_RTCK_DUPLICATEWAKEUPEVENT_MASK (1 << 21)
-#define OMAP4_JTAG_TCK_DUPLICATEWAKEUPEVENT_SHIFT 20
-#define OMAP4_JTAG_TCK_DUPLICATEWAKEUPEVENT_MASK (1 << 20)
-#define OMAP4_JTAG_NTRST_DUPLICATEWAKEUPEVENT_SHIFT 19
-#define OMAP4_JTAG_NTRST_DUPLICATEWAKEUPEVENT_MASK (1 << 19)
-#define OMAP4_SYS_BOOT7_DUPLICATEWAKEUPEVENT_SHIFT 18
-#define OMAP4_SYS_BOOT7_DUPLICATEWAKEUPEVENT_MASK (1 << 18)
-#define OMAP4_SYS_BOOT6_DUPLICATEWAKEUPEVENT_SHIFT 17
-#define OMAP4_SYS_BOOT6_DUPLICATEWAKEUPEVENT_MASK (1 << 17)
-#define OMAP4_SYS_PWRON_RESET_OUT_DUPLICATEWAKEUPEVENT_SHIFT 16
-#define OMAP4_SYS_PWRON_RESET_OUT_DUPLICATEWAKEUPEVENT_MASK (1 << 16)
-#define OMAP4_SYS_PWR_REQ_DUPLICATEWAKEUPEVENT_SHIFT 15
-#define OMAP4_SYS_PWR_REQ_DUPLICATEWAKEUPEVENT_MASK (1 << 15)
-#define OMAP4_SYS_NRESWARM_DUPLICATEWAKEUPEVENT_SHIFT 14
-#define OMAP4_SYS_NRESWARM_DUPLICATEWAKEUPEVENT_MASK (1 << 14)
-#define OMAP4_SYS_32K_DUPLICATEWAKEUPEVENT_SHIFT 13
-#define OMAP4_SYS_32K_DUPLICATEWAKEUPEVENT_MASK (1 << 13)
-#define OMAP4_FREF_CLK4_OUT_DUPLICATEWAKEUPEVENT_SHIFT 12
-#define OMAP4_FREF_CLK4_OUT_DUPLICATEWAKEUPEVENT_MASK (1 << 12)
-#define OMAP4_FREF_CLK4_REQ_DUPLICATEWAKEUPEVENT_SHIFT 11
-#define OMAP4_FREF_CLK4_REQ_DUPLICATEWAKEUPEVENT_MASK (1 << 11)
-#define OMAP4_FREF_CLK3_OUT_DUPLICATEWAKEUPEVENT_SHIFT 10
-#define OMAP4_FREF_CLK3_OUT_DUPLICATEWAKEUPEVENT_MASK (1 << 10)
-#define OMAP4_FREF_CLK3_REQ_DUPLICATEWAKEUPEVENT_SHIFT 9
-#define OMAP4_FREF_CLK3_REQ_DUPLICATEWAKEUPEVENT_MASK (1 << 9)
-#define OMAP4_FREF_CLK0_OUT_DUPLICATEWAKEUPEVENT_SHIFT 8
-#define OMAP4_FREF_CLK0_OUT_DUPLICATEWAKEUPEVENT_MASK (1 << 8)
-#define OMAP4_FREF_CLK_IOREQ_DUPLICATEWAKEUPEVENT_SHIFT 7
-#define OMAP4_FREF_CLK_IOREQ_DUPLICATEWAKEUPEVENT_MASK (1 << 7)
-#define OMAP4_SR_SDA_DUPLICATEWAKEUPEVENT_SHIFT 6
-#define OMAP4_SR_SDA_DUPLICATEWAKEUPEVENT_MASK (1 << 6)
-#define OMAP4_SR_SCL_DUPLICATEWAKEUPEVENT_SHIFT 5
-#define OMAP4_SR_SCL_DUPLICATEWAKEUPEVENT_MASK (1 << 5)
-#define OMAP4_SIM_PWRCTRL_DUPLICATEWAKEUPEVENT_SHIFT 4
-#define OMAP4_SIM_PWRCTRL_DUPLICATEWAKEUPEVENT_MASK (1 << 4)
-#define OMAP4_SIM_CD_DUPLICATEWAKEUPEVENT_SHIFT 3
-#define OMAP4_SIM_CD_DUPLICATEWAKEUPEVENT_MASK (1 << 3)
-#define OMAP4_SIM_RESET_DUPLICATEWAKEUPEVENT_SHIFT 2
-#define OMAP4_SIM_RESET_DUPLICATEWAKEUPEVENT_MASK (1 << 2)
-#define OMAP4_SIM_CLK_DUPLICATEWAKEUPEVENT_SHIFT 1
-#define OMAP4_SIM_CLK_DUPLICATEWAKEUPEVENT_MASK (1 << 1)
-#define OMAP4_SIM_IO_DUPLICATEWAKEUPEVENT_SHIFT 0
-#define OMAP4_SIM_IO_DUPLICATEWAKEUPEVENT_MASK (1 << 0)
-
-/* CONTROL_SMART1NOPMIO_PADCONF_0 */
-#define OMAP4_FREF_DR0_SC_SHIFT 30
-#define OMAP4_FREF_DR0_SC_MASK (0x3 << 30)
-#define OMAP4_FREF_DR1_SC_SHIFT 28
-#define OMAP4_FREF_DR1_SC_MASK (0x3 << 28)
-#define OMAP4_FREF_DR4_SC_SHIFT 26
-#define OMAP4_FREF_DR4_SC_MASK (0x3 << 26)
-#define OMAP4_FREF_DR5_SC_SHIFT 24
-#define OMAP4_FREF_DR5_SC_MASK (0x3 << 24)
-#define OMAP4_FREF_DR6_SC_SHIFT 22
-#define OMAP4_FREF_DR6_SC_MASK (0x3 << 22)
-#define OMAP4_FREF_DR7_SC_SHIFT 20
-#define OMAP4_FREF_DR7_SC_MASK (0x3 << 20)
-#define OMAP4_GPIO_DR7_SC_SHIFT 18
-#define OMAP4_GPIO_DR7_SC_MASK (0x3 << 18)
-#define OMAP4_DPM_DR0_SC_SHIFT 14
-#define OMAP4_DPM_DR0_SC_MASK (0x3 << 14)
-#define OMAP4_SIM_DR0_SC_SHIFT 12
-#define OMAP4_SIM_DR0_SC_MASK (0x3 << 12)
-
-/* CONTROL_SMART1NOPMIO_PADCONF_1 */
-#define OMAP4_FREF_DR0_LB_SHIFT 30
-#define OMAP4_FREF_DR0_LB_MASK (0x3 << 30)
-#define OMAP4_FREF_DR1_LB_SHIFT 28
-#define OMAP4_FREF_DR1_LB_MASK (0x3 << 28)
-#define OMAP4_FREF_DR4_LB_SHIFT 26
-#define OMAP4_FREF_DR4_LB_MASK (0x3 << 26)
-#define OMAP4_FREF_DR5_LB_SHIFT 24
-#define OMAP4_FREF_DR5_LB_MASK (0x3 << 24)
-#define OMAP4_FREF_DR6_LB_SHIFT 22
-#define OMAP4_FREF_DR6_LB_MASK (0x3 << 22)
-#define OMAP4_FREF_DR7_LB_SHIFT 20
-#define OMAP4_FREF_DR7_LB_MASK (0x3 << 20)
-#define OMAP4_GPIO_DR7_LB_SHIFT 18
-#define OMAP4_GPIO_DR7_LB_MASK (0x3 << 18)
-#define OMAP4_DPM_DR0_LB_SHIFT 14
-#define OMAP4_DPM_DR0_LB_MASK (0x3 << 14)
-#define OMAP4_SIM_DR0_LB_SHIFT 12
-#define OMAP4_SIM_DR0_LB_MASK (0x3 << 12)
-
-/* CONTROL_PADCONF_MODE */
-#define OMAP4_VDDS_DV_FREF_SHIFT 31
-#define OMAP4_VDDS_DV_FREF_MASK (1 << 31)
-#define OMAP4_VDDS_DV_BANK2_SHIFT 30
-#define OMAP4_VDDS_DV_BANK2_MASK (1 << 30)
-
-/* CONTROL_XTAL_OSCILLATOR */
-#define OMAP4_OSCILLATOR_BOOST_SHIFT 31
-#define OMAP4_OSCILLATOR_BOOST_MASK (1 << 31)
-#define OMAP4_OSCILLATOR_OS_OUT_SHIFT 30
-#define OMAP4_OSCILLATOR_OS_OUT_MASK (1 << 30)
-
-/* CONTROL_USIMIO */
-#define OMAP4_PAD_USIM_CLK_LOW_SHIFT 31
-#define OMAP4_PAD_USIM_CLK_LOW_MASK (1 << 31)
-#define OMAP4_PAD_USIM_RST_LOW_SHIFT 29
-#define OMAP4_PAD_USIM_RST_LOW_MASK (1 << 29)
-#define OMAP4_USIM_PWRDNZ_SHIFT 28
-#define OMAP4_USIM_PWRDNZ_MASK (1 << 28)
-
-/* CONTROL_I2C_2 */
-#define OMAP4_SR_SDA_GLFENB_SHIFT 31
-#define OMAP4_SR_SDA_GLFENB_MASK (1 << 31)
-#define OMAP4_SR_SDA_LOAD_BITS_SHIFT 29
-#define OMAP4_SR_SDA_LOAD_BITS_MASK (0x3 << 29)
-#define OMAP4_SR_SDA_PULLUPRESX_SHIFT 28
-#define OMAP4_SR_SDA_PULLUPRESX_MASK (1 << 28)
-#define OMAP4_SR_SCL_GLFENB_SHIFT 27
-#define OMAP4_SR_SCL_GLFENB_MASK (1 << 27)
-#define OMAP4_SR_SCL_LOAD_BITS_SHIFT 25
-#define OMAP4_SR_SCL_LOAD_BITS_MASK (0x3 << 25)
-#define OMAP4_SR_SCL_PULLUPRESX_SHIFT 24
-#define OMAP4_SR_SCL_PULLUPRESX_MASK (1 << 24)
-
-/* CONTROL_JTAG */
-#define OMAP4_JTAG_NTRST_EN_SHIFT 31
-#define OMAP4_JTAG_NTRST_EN_MASK (1 << 31)
-#define OMAP4_JTAG_TCK_EN_SHIFT 30
-#define OMAP4_JTAG_TCK_EN_MASK (1 << 30)
-#define OMAP4_JTAG_RTCK_EN_SHIFT 29
-#define OMAP4_JTAG_RTCK_EN_MASK (1 << 29)
-#define OMAP4_JTAG_TDI_EN_SHIFT 28
-#define OMAP4_JTAG_TDI_EN_MASK (1 << 28)
-#define OMAP4_JTAG_TDO_EN_SHIFT 27
-#define OMAP4_JTAG_TDO_EN_MASK (1 << 27)
-
-/* CONTROL_SYS */
-#define OMAP4_SYS_NRESWARM_PIPU_SHIFT 31
-#define OMAP4_SYS_NRESWARM_PIPU_MASK (1 << 31)
-
-/* WKUP_CONTROL_SPARE_RW */
-#define OMAP4_WKUP_CONTROL_SPARE_RW_SHIFT 0
-#define OMAP4_WKUP_CONTROL_SPARE_RW_MASK (0xffffffff << 0)
-
-/* WKUP_CONTROL_SPARE_R */
-#define OMAP4_WKUP_CONTROL_SPARE_R_SHIFT 0
-#define OMAP4_WKUP_CONTROL_SPARE_R_MASK (0xffffffff << 0)
-
-/* WKUP_CONTROL_SPARE_R_C0 */
-#define OMAP4_WKUP_CONTROL_SPARE_R_C0_SHIFT 31
-#define OMAP4_WKUP_CONTROL_SPARE_R_C0_MASK (1 << 31)
-#define OMAP4_WKUP_CONTROL_SPARE_R_C1_SHIFT 30
-#define OMAP4_WKUP_CONTROL_SPARE_R_C1_MASK (1 << 30)
-#define OMAP4_WKUP_CONTROL_SPARE_R_C2_SHIFT 29
-#define OMAP4_WKUP_CONTROL_SPARE_R_C2_MASK (1 << 29)
-#define OMAP4_WKUP_CONTROL_SPARE_R_C3_SHIFT 28
-#define OMAP4_WKUP_CONTROL_SPARE_R_C3_MASK (1 << 28)
-#define OMAP4_WKUP_CONTROL_SPARE_R_C4_SHIFT 27
-#define OMAP4_WKUP_CONTROL_SPARE_R_C4_MASK (1 << 27)
-#define OMAP4_WKUP_CONTROL_SPARE_R_C5_SHIFT 26
-#define OMAP4_WKUP_CONTROL_SPARE_R_C5_MASK (1 << 26)
-#define OMAP4_WKUP_CONTROL_SPARE_R_C6_SHIFT 25
-#define OMAP4_WKUP_CONTROL_SPARE_R_C6_MASK (1 << 25)
-#define OMAP4_WKUP_CONTROL_SPARE_R_C7_SHIFT 24
-#define OMAP4_WKUP_CONTROL_SPARE_R_C7_MASK (1 << 24)
-
-#endif
diff --git a/arch/arm/mach-omap2/include/mach/ctrl_module_wkup_44xx.h b/arch/arm/mach-omap2/include/mach/ctrl_module_wkup_44xx.h
deleted file mode 100644
index a0af9ba..0000000
--- a/arch/arm/mach-omap2/include/mach/ctrl_module_wkup_44xx.h
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * OMAP44xx CTRL_MODULE_WKUP registers and bitfields
- *
- * Copyright (C) 2009-2010 Texas Instruments, Inc.
- *
- * Benoit Cousson (b-cousson@ti.com)
- * Santosh Shilimkar (santosh.shilimkar@ti.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_WKUP_44XX_H
-#define __ARCH_ARM_MACH_OMAP2_CTRL_MODULE_WKUP_44XX_H
-
-
-/* Base address */
-#define OMAP4_CTRL_MODULE_WKUP 0x4a30c000
-
-/* Registers offset */
-#define OMAP4_CTRL_MODULE_WKUP_IP_REVISION 0x0000
-#define OMAP4_CTRL_MODULE_WKUP_IP_HWINFO 0x0004
-#define OMAP4_CTRL_MODULE_WKUP_IP_SYSCONFIG 0x0010
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_0 0x0460
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_1 0x0464
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_2 0x0468
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_3 0x046c
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_4 0x0470
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_5 0x0474
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_6 0x0478
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_7 0x047c
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_8 0x0480
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_9 0x0484
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_10 0x0488
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_11 0x048c
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_12 0x0490
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_13 0x0494
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_14 0x0498
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_15 0x049c
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_16 0x04a0
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_17 0x04a4
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_18 0x04a8
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_19 0x04ac
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_20 0x04b0
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_21 0x04b4
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_22 0x04b8
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_23 0x04bc
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_24 0x04c0
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_25 0x04c4
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_26 0x04c8
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_27 0x04cc
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_28 0x04d0
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_29 0x04d4
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_30 0x04d8
-#define OMAP4_CTRL_MODULE_WKUP_CONF_DEBUG_SEL_TST_31 0x04dc
-
-/* Registers shifts and masks */
-
-/* IP_REVISION */
-#define OMAP4_IP_REV_SCHEME_SHIFT 30
-#define OMAP4_IP_REV_SCHEME_MASK (0x3 << 30)
-#define OMAP4_IP_REV_FUNC_SHIFT 16
-#define OMAP4_IP_REV_FUNC_MASK (0xfff << 16)
-#define OMAP4_IP_REV_RTL_SHIFT 11
-#define OMAP4_IP_REV_RTL_MASK (0x1f << 11)
-#define OMAP4_IP_REV_MAJOR_SHIFT 8
-#define OMAP4_IP_REV_MAJOR_MASK (0x7 << 8)
-#define OMAP4_IP_REV_CUSTOM_SHIFT 6
-#define OMAP4_IP_REV_CUSTOM_MASK (0x3 << 6)
-#define OMAP4_IP_REV_MINOR_SHIFT 0
-#define OMAP4_IP_REV_MINOR_MASK (0x3f << 0)
-
-/* IP_HWINFO */
-#define OMAP4_IP_HWINFO_SHIFT 0
-#define OMAP4_IP_HWINFO_MASK (0xffffffff << 0)
-
-/* IP_SYSCONFIG */
-#define OMAP4_IP_SYSCONFIG_IDLEMODE_SHIFT 2
-#define OMAP4_IP_SYSCONFIG_IDLEMODE_MASK (0x3 << 2)
-
-/* CONF_DEBUG_SEL_TST_0 */
-#define OMAP4_WKUP_MODE_SHIFT 0
-#define OMAP4_WKUP_MODE_MASK (1 << 0)
-
-#endif
--
1.7.7.6
[-- Attachment #2: Attached Message Part --]
[-- Type: text/plain, Size: 0 bytes --]
^ permalink raw reply related
* [PATCH v4 0/4] OMAP System Control Module
From: Konstantin Baydarov @ 2012-07-25 11:05 UTC (permalink / raw)
To: b-cousson, kishon, santosh.shilimkar, tony, paul
Cc: balbi, amit.kucheria, linux-pm, linux-arm-kernel, linux-omap,
amit.kachhap, Eduardo Valentin
[-- Attachment #1: Type: text/plain, Size: 2587 bytes --]
Hello.
This is a next version of series of patches(based on Eduardo Valentin's patch set) adding a basic support for system control module, on OMAP4+ context.
As Bandgap and usb phy drivers are now independent from control module driver and they will be sent separately. IIUC, Bandgap driver has already been sent.
OMAP system control module driver provides only one API function - read of CONTROL_STATUS register:
u32 omap_control_status_read(void) that is used in omap_type()
The physical address of CONTROL_STATUS register is specified in DT:
ctrl_module_core: ctrl_module_core@4A0022C4 {
compatible = "ti,omap4-control";
#address-cells = <1>;
#size-cells = <1>;
/* ranges; */
ti,hwmods = "ctrl_module_core";
reg = <0x4A0022C4 0x4>; /* CONTROL_STATUS register */
};
Eduardo Valentin (3):
From d4c6cf571e403f30a97db32ba6198b0c35a864b7 Mon Sep 17 00:00:00
2001
From 116a0111a6e2e563a81b0aa2dbf7a18e9ef9dbd1 Mon Sep 17 00:00:00
2001
From dda5f1badbfb82718c9ff21098998a842ce6886e Mon Sep 17 00:00:00
2001
Santosh Shilimkar (1):
From 1c2af619cc34aafc027330fbb823595e3b2d139b Mon Sep 17 00:00:00
2001
.../devicetree/bindings/mfd/omap_control.txt | 32 +
arch/arm/boot/dts/omap4.dtsi | 10 +
arch/arm/mach-omap2/Kconfig | 1 +
arch/arm/mach-omap2/control.h | 48 +-
arch/arm/mach-omap2/id.c | 11 +-
.../include/mach/ctrl_module_core_44xx.h | 392 ------
.../include/mach/ctrl_module_pad_core_44xx.h | 1409 --------------------
.../include/mach/ctrl_module_pad_wkup_44xx.h | 236 ----
.../include/mach/ctrl_module_wkup_44xx.h | 92 --
arch/arm/plat-omap/Kconfig | 4 +
drivers/mfd/Kconfig | 6 +
drivers/mfd/Makefile | 1 +
drivers/mfd/omap-control-core.c | 162 +++
include/linux/mfd/omap_control.h | 35 +
14 files changed, 300 insertions(+), 2139 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/omap_control.txt
delete mode 100644 arch/arm/mach-omap2/include/mach/ctrl_module_core_44xx.h
delete mode 100644 arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h
delete mode 100644 arch/arm/mach-omap2/include/mach/ctrl_module_pad_wkup_44xx.h
delete mode 100644 arch/arm/mach-omap2/include/mach/ctrl_module_wkup_44xx.h
create mode 100644 drivers/mfd/omap-control-core.c
create mode 100644 include/linux/mfd/omap_control.h
--
1.7.7.6
[-- Attachment #2: Attached Message Part --]
[-- Type: text/plain, Size: 0 bytes --]
^ permalink raw reply
* Re: [linux-pm] ACPI & Power Management Patches for Linux-3.6-merge - part 1
From: Amit Kachhap @ 2012-07-25 6:47 UTC (permalink / raw)
To: Len Brown; +Cc: linux-acpi, linux-pm, linux-kernel
In-Reply-To: <1343187708-19532-1-git-send-email-lenb@kernel.org>
On 25 July 2012 09:10, Len Brown <lenb@kernel.org> wrote:
> Here is my initial queue of patches for Linux 3.6.
> Please let me know if you see troubles with any of them.
Hi Len,
I cannot see my patches (V5)
http://www.spinics.net/lists/linux-pm/msg27866.html in your list. V4
version was part of your pull request for the last merge window. Also
because of Durgadoss's "Thermal trip points writeable" patch present
in this list one small rework is needed. I will update it and resend
it shortly.
Thanks,
Amit Daniel
>
> thanks,
> Len Brown, Intel Open Source Technology Center
>
^ permalink raw reply
* [PATCH 52/52] Thermal: Documentation update
From: Len Brown @ 2012-07-25 3:41 UTC (permalink / raw)
To: linux-acpi, linux-pm; +Cc: linux-kernel, Zhang Rui, Len Brown
In-Reply-To: <6af1c4fc5227af65092ebc848989693562bfa3e8.1343187617.git.len.brown@intel.com>
From: Zhang Rui <rui.zhang@intel.com>
With commit 6503e5df08008b9a47022b5e9ebba658c8fa69af,
the value of /sys/class/thermal/thermal_zoneX/mode has been changed
from user/kernel to enabled/disabled.
Update the documentation so that users won't be confused.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
Documentation/thermal/sysfs-api.txt | 20 ++++++++++----------
drivers/acpi/thermal.c | 6 ++----
2 files changed, 12 insertions(+), 14 deletions(-)
diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt
index 2ba4c9b..c087dbc 100644
--- a/Documentation/thermal/sysfs-api.txt
+++ b/Documentation/thermal/sysfs-api.txt
@@ -47,11 +47,11 @@ temperature) and throttle appropriate devices.
.bind: bind the thermal zone device with a thermal cooling device.
.unbind: unbind the thermal zone device with a thermal cooling device.
.get_temp: get the current temperature of the thermal zone.
- .get_mode: get the current mode (user/kernel) of the thermal zone.
- - "kernel" means thermal management is done in kernel.
- - "user" will prevent kernel thermal driver actions upon trip points
+ .get_mode: get the current mode (enabled/disabled) of the thermal zone.
+ - "enabled" means the kernel thermal management is enabled.
+ - "disabled" will prevent kernel thermal driver action upon trip points
so that user applications can take charge of thermal management.
- .set_mode: set the mode (user/kernel) of the thermal zone.
+ .set_mode: set the mode (enabled/disabled) of the thermal zone.
.get_trip_type: get the type of certain trip point.
.get_trip_temp: get the temperature above which the certain trip point
will be fired.
@@ -170,14 +170,14 @@ temp
RO, Required
mode
- One of the predefined values in [kernel, user].
+ One of the predefined values in [enabled, disabled].
This file gives information about the algorithm that is currently
managing the thermal zone. It can be either default kernel based
algorithm or user space application.
- kernel = Thermal management in kernel thermal zone driver.
- user = Preventing kernel thermal zone driver actions upon
- trip points so that user application can take full
- charge of the thermal management.
+ enabled = enable Kernel Thermal management.
+ disabled = Preventing kernel thermal zone driver actions upon
+ trip points so that user application can take full
+ charge of the thermal management.
RW, Optional
trip_point_[0-*]_temp
@@ -256,7 +256,7 @@ method, the sys I/F structure will be built like this:
|thermal_zone1:
|---type: acpitz
|---temp: 37000
- |---mode: kernel
+ |---mode: enabled
|---trip_point_0_temp: 100000
|---trip_point_0_type: critical
|---trip_point_1_temp: 80000
diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index 2107d1b..8275e7b 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -550,8 +550,6 @@ static int thermal_get_temp(struct thermal_zone_device *thermal,
return 0;
}
-static const char enabled[] = "kernel";
-static const char disabled[] = "user";
static int thermal_get_mode(struct thermal_zone_device *thermal,
enum thermal_device_mode *mode)
{
@@ -588,8 +586,8 @@ static int thermal_set_mode(struct thermal_zone_device *thermal,
if (enable != tz->tz_enabled) {
tz->tz_enabled = enable;
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "%s ACPI thermal control\n",
- tz->tz_enabled ? enabled : disabled));
+ "%s kernel ACPI thermal control\n",
+ tz->tz_enabled ? "Enable" : "Disable"));
acpi_thermal_check(tz);
}
return 0;
--
1.7.12.rc0
^ permalink raw reply related
* [PATCH 51/52] Thermal: Add Hysteresis attributes
From: Len Brown @ 2012-07-25 3:41 UTC (permalink / raw)
To: linux-acpi, linux-pm
Cc: linux-kernel, Durgadoss R, Durgadoss R, Zhang Rui, Len Brown
In-Reply-To: <6af1c4fc5227af65092ebc848989693562bfa3e8.1343187617.git.len.brown@intel.com>
From: Durgadoss R <dugardoss.r@intel.com>
The Linux Thermal Framework does not support hysteresis
attributes. Most thermal sensors, today, have a
hysteresis value associated with trip points.
This patch adds hysteresis attributes on a per-trip-point
basis, to the Thermal Framework. These attributes are
optionally writable.
Signed-off-by: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
Documentation/thermal/sysfs-api.txt | 6 +++
drivers/thermal/thermal_sys.c | 88 ++++++++++++++++++++++++++++++++++---
include/linux/thermal.h | 5 +++
3 files changed, 94 insertions(+), 5 deletions(-)
diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt
index 4c10593..2ba4c9b 100644
--- a/Documentation/thermal/sysfs-api.txt
+++ b/Documentation/thermal/sysfs-api.txt
@@ -121,6 +121,7 @@ Thermal zone device sys I/F, created once it's registered:
|---mode: Working mode of the thermal zone
|---trip_point_[0-*]_temp: Trip point temperature
|---trip_point_[0-*]_type: Trip point type
+ |---trip_point_[0-*]_hyst: Hysteresis value for this trip point
Thermal cooling device sys I/F, created once it's registered:
/sys/class/thermal/cooling_device[0-*]:
@@ -190,6 +191,11 @@ trip_point_[0-*]_type
thermal zone.
RO, Optional
+trip_point_[0-*]_hyst
+ The hysteresis value for a trip point, represented as an integer
+ Unit: Celsius
+ RW, Optional
+
cdev[0-*]
Sysfs link to the thermal cooling device node where the sys I/F
for cooling device throttling control represents.
diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c
index 5feb335..2d7a9fe 100644
--- a/drivers/thermal/thermal_sys.c
+++ b/drivers/thermal/thermal_sys.c
@@ -240,6 +240,52 @@ trip_point_temp_show(struct device *dev, struct device_attribute *attr,
}
static ssize_t
+trip_point_hyst_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct thermal_zone_device *tz = to_thermal_zone(dev);
+ int trip, ret;
+ unsigned long temperature;
+
+ if (!tz->ops->set_trip_hyst)
+ return -EPERM;
+
+ if (!sscanf(attr->attr.name, "trip_point_%d_hyst", &trip))
+ return -EINVAL;
+
+ if (kstrtoul(buf, 10, &temperature))
+ return -EINVAL;
+
+ /*
+ * We are not doing any check on the 'temperature' value
+ * here. The driver implementing 'set_trip_hyst' has to
+ * take care of this.
+ */
+ ret = tz->ops->set_trip_hyst(tz, trip, temperature);
+
+ return ret ? ret : count;
+}
+
+static ssize_t
+trip_point_hyst_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct thermal_zone_device *tz = to_thermal_zone(dev);
+ int trip, ret;
+ unsigned long temperature;
+
+ if (!tz->ops->get_trip_hyst)
+ return -EPERM;
+
+ if (!sscanf(attr->attr.name, "trip_point_%d_hyst", &trip))
+ return -EINVAL;
+
+ ret = tz->ops->get_trip_hyst(tz, trip, &temperature);
+
+ return ret ? ret : sprintf(buf, "%ld\n", temperature);
+}
+
+static ssize_t
passive_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
@@ -1091,21 +1137,29 @@ EXPORT_SYMBOL(thermal_zone_device_update);
static int create_trip_attrs(struct thermal_zone_device *tz, int mask)
{
int indx;
+ int size = sizeof(struct thermal_attr) * tz->trips;
- tz->trip_type_attrs =
- kzalloc(sizeof(struct thermal_attr) * tz->trips, GFP_KERNEL);
+ tz->trip_type_attrs = kzalloc(size, GFP_KERNEL);
if (!tz->trip_type_attrs)
return -ENOMEM;
- tz->trip_temp_attrs =
- kzalloc(sizeof(struct thermal_attr) * tz->trips, GFP_KERNEL);
+ tz->trip_temp_attrs = kzalloc(size, GFP_KERNEL);
if (!tz->trip_temp_attrs) {
kfree(tz->trip_type_attrs);
return -ENOMEM;
}
- for (indx = 0; indx < tz->trips; indx++) {
+ if (tz->ops->get_trip_hyst) {
+ tz->trip_hyst_attrs = kzalloc(size, GFP_KERNEL);
+ if (!tz->trip_hyst_attrs) {
+ kfree(tz->trip_type_attrs);
+ kfree(tz->trip_temp_attrs);
+ return -ENOMEM;
+ }
+ }
+
+ for (indx = 0; indx < tz->trips; indx++) {
/* create trip type attribute */
snprintf(tz->trip_type_attrs[indx].name, THERMAL_NAME_LENGTH,
"trip_point_%d_type", indx);
@@ -1136,6 +1190,26 @@ static int create_trip_attrs(struct thermal_zone_device *tz, int mask)
device_create_file(&tz->device,
&tz->trip_temp_attrs[indx].attr);
+
+ /* create Optional trip hyst attribute */
+ if (!tz->ops->get_trip_hyst)
+ continue;
+ snprintf(tz->trip_hyst_attrs[indx].name, THERMAL_NAME_LENGTH,
+ "trip_point_%d_hyst", indx);
+
+ sysfs_attr_init(&tz->trip_hyst_attrs[indx].attr.attr);
+ tz->trip_hyst_attrs[indx].attr.attr.name =
+ tz->trip_hyst_attrs[indx].name;
+ tz->trip_hyst_attrs[indx].attr.attr.mode = S_IRUGO;
+ tz->trip_hyst_attrs[indx].attr.show = trip_point_hyst_show;
+ if (tz->ops->set_trip_hyst) {
+ tz->trip_hyst_attrs[indx].attr.attr.mode |= S_IWUSR;
+ tz->trip_hyst_attrs[indx].attr.store =
+ trip_point_hyst_store;
+ }
+
+ device_create_file(&tz->device,
+ &tz->trip_hyst_attrs[indx].attr);
}
return 0;
}
@@ -1149,9 +1223,13 @@ static void remove_trip_attrs(struct thermal_zone_device *tz)
&tz->trip_type_attrs[indx].attr);
device_remove_file(&tz->device,
&tz->trip_temp_attrs[indx].attr);
+ if (tz->ops->get_trip_hyst)
+ device_remove_file(&tz->device,
+ &tz->trip_hyst_attrs[indx].attr);
}
kfree(tz->trip_type_attrs);
kfree(tz->trip_temp_attrs);
+ kfree(tz->trip_hyst_attrs);
}
/**
diff --git a/include/linux/thermal.h b/include/linux/thermal.h
index 6eaf914..cfc8d90 100644
--- a/include/linux/thermal.h
+++ b/include/linux/thermal.h
@@ -60,6 +60,10 @@ struct thermal_zone_device_ops {
unsigned long *);
int (*set_trip_temp) (struct thermal_zone_device *, int,
unsigned long);
+ int (*get_trip_hyst) (struct thermal_zone_device *, int,
+ unsigned long *);
+ int (*set_trip_hyst) (struct thermal_zone_device *, int,
+ unsigned long);
int (*get_crit_temp) (struct thermal_zone_device *, unsigned long *);
int (*notify) (struct thermal_zone_device *, int,
enum thermal_trip_type);
@@ -98,6 +102,7 @@ struct thermal_zone_device {
struct device device;
struct thermal_attr *trip_temp_attrs;
struct thermal_attr *trip_type_attrs;
+ struct thermal_attr *trip_hyst_attrs;
void *devdata;
int trips;
int tc1;
--
1.7.12.rc0
^ permalink raw reply related
* [PATCH 50/52] Thermal: Make Thermal trip points writeable
From: Len Brown @ 2012-07-25 3:41 UTC (permalink / raw)
To: linux-acpi, linux-pm
Cc: linux-kernel, Durgadoss R, Durgadoss R, Zhang Rui, Len Brown
In-Reply-To: <6af1c4fc5227af65092ebc848989693562bfa3e8.1343187617.git.len.brown@intel.com>
From: Durgadoss R <dugardoss.r@intel.com>
Some of the thermal drivers using the Generic Thermal Framework
require (all/some) trip points to be writeable. This patch makes
the trip point temperatures writeable on a per-trip point basis,
and modifies the required function call in thermal.c. This patch
also updates the Documentation to reflect the new change.
Signed-off-by: Durgadoss R <durgadoss.r@intel.com>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
Documentation/thermal/sysfs-api.txt | 4 +-
drivers/acpi/thermal.c | 4 +-
drivers/platform/x86/acerhdf.c | 2 +-
drivers/platform/x86/intel_mid_thermal.c | 2 +-
drivers/thermal/spear_thermal.c | 2 +-
drivers/thermal/thermal_sys.c | 145 +++++++++++++++++++++----------
include/linux/thermal.h | 15 +++-
7 files changed, 121 insertions(+), 53 deletions(-)
diff --git a/Documentation/thermal/sysfs-api.txt b/Documentation/thermal/sysfs-api.txt
index 1733ab9..4c10593 100644
--- a/Documentation/thermal/sysfs-api.txt
+++ b/Documentation/thermal/sysfs-api.txt
@@ -32,7 +32,8 @@ temperature) and throttle appropriate devices.
1.1 thermal zone device interface
1.1.1 struct thermal_zone_device *thermal_zone_device_register(char *name,
- int trips, void *devdata, struct thermal_zone_device_ops *ops)
+ int trips, int mask, void *devdata,
+ struct thermal_zone_device_ops *ops)
This interface function adds a new thermal zone device (sensor) to
/sys/class/thermal folder as thermal_zone[0-*]. It tries to bind all the
@@ -40,6 +41,7 @@ temperature) and throttle appropriate devices.
name: the thermal zone name.
trips: the total number of trip points this thermal zone supports.
+ mask: Bit string: If 'n'th bit is set, then trip point 'n' is writeable.
devdata: device private data
ops: thermal zone device call-backs.
.bind: bind the thermal zone device with a thermal cooling device.
diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index 7dbebea..2107d1b 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -845,7 +845,7 @@ static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz)
if (tz->trips.passive.flags.valid)
tz->thermal_zone =
- thermal_zone_device_register("acpitz", trips, tz,
+ thermal_zone_device_register("acpitz", trips, 0, tz,
&acpi_thermal_zone_ops,
tz->trips.passive.tc1,
tz->trips.passive.tc2,
@@ -853,7 +853,7 @@ static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz)
tz->polling_frequency*100);
else
tz->thermal_zone =
- thermal_zone_device_register("acpitz", trips, tz,
+ thermal_zone_device_register("acpitz", trips, 0, tz,
&acpi_thermal_zone_ops,
0, 0, 0,
tz->polling_frequency*100);
diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c
index 2fd9d36..39abb15 100644
--- a/drivers/platform/x86/acerhdf.c
+++ b/drivers/platform/x86/acerhdf.c
@@ -660,7 +660,7 @@ static int acerhdf_register_thermal(void)
if (IS_ERR(cl_dev))
return -EINVAL;
- thz_dev = thermal_zone_device_register("acerhdf", 1, NULL,
+ thz_dev = thermal_zone_device_register("acerhdf", 1, 0, NULL,
&acerhdf_dev_ops, 0, 0, 0,
(kernelmode) ? interval*1000 : 0);
if (IS_ERR(thz_dev))
diff --git a/drivers/platform/x86/intel_mid_thermal.c b/drivers/platform/x86/intel_mid_thermal.c
index 5ae9cd9..2b2c212 100644
--- a/drivers/platform/x86/intel_mid_thermal.c
+++ b/drivers/platform/x86/intel_mid_thermal.c
@@ -499,7 +499,7 @@ static int mid_thermal_probe(struct platform_device *pdev)
goto err;
}
pinfo->tzd[i] = thermal_zone_device_register(name[i],
- 0, td_info, &tzd_ops, 0, 0, 0, 0);
+ 0, 0, td_info, &tzd_ops, 0, 0, 0, 0);
if (IS_ERR(pinfo->tzd[i])) {
kfree(td_info);
ret = PTR_ERR(pinfo->tzd[i]);
diff --git a/drivers/thermal/spear_thermal.c b/drivers/thermal/spear_thermal.c
index c2e32df..69a55d4 100644
--- a/drivers/thermal/spear_thermal.c
+++ b/drivers/thermal/spear_thermal.c
@@ -147,7 +147,7 @@ static int spear_thermal_probe(struct platform_device *pdev)
stdev->flags = pdata->thermal_flags;
writel_relaxed(stdev->flags, stdev->thermal_base);
- spear_thermal = thermal_zone_device_register("spear_thermal", 0,
+ spear_thermal = thermal_zone_device_register("spear_thermal", 0, 0,
stdev, &ops, 0, 0, 0, 0);
if (IS_ERR(spear_thermal)) {
dev_err(&pdev->dev, "thermal zone device is NULL\n");
diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c
index 022bacb..5feb335 100644
--- a/drivers/thermal/thermal_sys.c
+++ b/drivers/thermal/thermal_sys.c
@@ -196,6 +196,28 @@ trip_point_type_show(struct device *dev, struct device_attribute *attr,
}
static ssize_t
+trip_point_temp_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct thermal_zone_device *tz = to_thermal_zone(dev);
+ int trip, ret;
+ unsigned long temperature;
+
+ if (!tz->ops->set_trip_temp)
+ return -EPERM;
+
+ if (!sscanf(attr->attr.name, "trip_point_%d_temp", &trip))
+ return -EINVAL;
+
+ if (kstrtoul(buf, 10, &temperature))
+ return -EINVAL;
+
+ ret = tz->ops->set_trip_temp(tz, trip, temperature);
+
+ return ret ? ret : count;
+}
+
+static ssize_t
trip_point_temp_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
@@ -283,33 +305,6 @@ static DEVICE_ATTR(temp, 0444, temp_show, NULL);
static DEVICE_ATTR(mode, 0644, mode_show, mode_store);
static DEVICE_ATTR(passive, S_IRUGO | S_IWUSR, passive_show, passive_store);
-static struct device_attribute trip_point_attrs[] = {
- __ATTR(trip_point_0_type, 0444, trip_point_type_show, NULL),
- __ATTR(trip_point_0_temp, 0444, trip_point_temp_show, NULL),
- __ATTR(trip_point_1_type, 0444, trip_point_type_show, NULL),
- __ATTR(trip_point_1_temp, 0444, trip_point_temp_show, NULL),
- __ATTR(trip_point_2_type, 0444, trip_point_type_show, NULL),
- __ATTR(trip_point_2_temp, 0444, trip_point_temp_show, NULL),
- __ATTR(trip_point_3_type, 0444, trip_point_type_show, NULL),
- __ATTR(trip_point_3_temp, 0444, trip_point_temp_show, NULL),
- __ATTR(trip_point_4_type, 0444, trip_point_type_show, NULL),
- __ATTR(trip_point_4_temp, 0444, trip_point_temp_show, NULL),
- __ATTR(trip_point_5_type, 0444, trip_point_type_show, NULL),
- __ATTR(trip_point_5_temp, 0444, trip_point_temp_show, NULL),
- __ATTR(trip_point_6_type, 0444, trip_point_type_show, NULL),
- __ATTR(trip_point_6_temp, 0444, trip_point_temp_show, NULL),
- __ATTR(trip_point_7_type, 0444, trip_point_type_show, NULL),
- __ATTR(trip_point_7_temp, 0444, trip_point_temp_show, NULL),
- __ATTR(trip_point_8_type, 0444, trip_point_type_show, NULL),
- __ATTR(trip_point_8_temp, 0444, trip_point_temp_show, NULL),
- __ATTR(trip_point_9_type, 0444, trip_point_type_show, NULL),
- __ATTR(trip_point_9_temp, 0444, trip_point_temp_show, NULL),
- __ATTR(trip_point_10_type, 0444, trip_point_type_show, NULL),
- __ATTR(trip_point_10_temp, 0444, trip_point_temp_show, NULL),
- __ATTR(trip_point_11_type, 0444, trip_point_type_show, NULL),
- __ATTR(trip_point_11_temp, 0444, trip_point_temp_show, NULL),
-};
-
/* sys I/F for cooling device */
#define to_cooling_device(_dev) \
container_of(_dev, struct thermal_cooling_device, device)
@@ -1089,9 +1084,81 @@ leave:
EXPORT_SYMBOL(thermal_zone_device_update);
/**
+ * create_trip_attrs - create attributes for trip points
+ * @tz: the thermal zone device
+ * @mask: Writeable trip point bitmap.
+ */
+static int create_trip_attrs(struct thermal_zone_device *tz, int mask)
+{
+ int indx;
+
+ tz->trip_type_attrs =
+ kzalloc(sizeof(struct thermal_attr) * tz->trips, GFP_KERNEL);
+ if (!tz->trip_type_attrs)
+ return -ENOMEM;
+
+ tz->trip_temp_attrs =
+ kzalloc(sizeof(struct thermal_attr) * tz->trips, GFP_KERNEL);
+ if (!tz->trip_temp_attrs) {
+ kfree(tz->trip_type_attrs);
+ return -ENOMEM;
+ }
+
+ for (indx = 0; indx < tz->trips; indx++) {
+
+ /* create trip type attribute */
+ snprintf(tz->trip_type_attrs[indx].name, THERMAL_NAME_LENGTH,
+ "trip_point_%d_type", indx);
+
+ sysfs_attr_init(&tz->trip_type_attrs[indx].attr.attr);
+ tz->trip_type_attrs[indx].attr.attr.name =
+ tz->trip_type_attrs[indx].name;
+ tz->trip_type_attrs[indx].attr.attr.mode = S_IRUGO;
+ tz->trip_type_attrs[indx].attr.show = trip_point_type_show;
+
+ device_create_file(&tz->device,
+ &tz->trip_type_attrs[indx].attr);
+
+ /* create trip temp attribute */
+ snprintf(tz->trip_temp_attrs[indx].name, THERMAL_NAME_LENGTH,
+ "trip_point_%d_temp", indx);
+
+ sysfs_attr_init(&tz->trip_temp_attrs[indx].attr.attr);
+ tz->trip_temp_attrs[indx].attr.attr.name =
+ tz->trip_temp_attrs[indx].name;
+ tz->trip_temp_attrs[indx].attr.attr.mode = S_IRUGO;
+ tz->trip_temp_attrs[indx].attr.show = trip_point_temp_show;
+ if (mask & (1 << indx)) {
+ tz->trip_temp_attrs[indx].attr.attr.mode |= S_IWUSR;
+ tz->trip_temp_attrs[indx].attr.store =
+ trip_point_temp_store;
+ }
+
+ device_create_file(&tz->device,
+ &tz->trip_temp_attrs[indx].attr);
+ }
+ return 0;
+}
+
+static void remove_trip_attrs(struct thermal_zone_device *tz)
+{
+ int indx;
+
+ for (indx = 0; indx < tz->trips; indx++) {
+ device_remove_file(&tz->device,
+ &tz->trip_type_attrs[indx].attr);
+ device_remove_file(&tz->device,
+ &tz->trip_temp_attrs[indx].attr);
+ }
+ kfree(tz->trip_type_attrs);
+ kfree(tz->trip_temp_attrs);
+}
+
+/**
* thermal_zone_device_register - register a new thermal zone device
* @type: the thermal zone device type
* @trips: the number of trip points the thermal zone support
+ * @mask: a bit string indicating the writeablility of trip points
* @devdata: private device data
* @ops: standard thermal zone device callbacks
* @tc1: thermal coefficient 1 for passive calculations
@@ -1107,7 +1174,7 @@ EXPORT_SYMBOL(thermal_zone_device_update);
* section 11.1.5.1 of the ACPI specification 3.0.
*/
struct thermal_zone_device *thermal_zone_device_register(char *type,
- int trips, void *devdata,
+ int trips, int mask, void *devdata,
const struct thermal_zone_device_ops *ops,
int tc1, int tc2, int passive_delay, int polling_delay)
{
@@ -1121,7 +1188,7 @@ struct thermal_zone_device *thermal_zone_device_register(char *type,
if (strlen(type) >= THERMAL_NAME_LENGTH)
return ERR_PTR(-EINVAL);
- if (trips > THERMAL_MAX_TRIPS || trips < 0)
+ if (trips > THERMAL_MAX_TRIPS || trips < 0 || mask >> trips)
return ERR_PTR(-EINVAL);
if (!ops || !ops->get_temp)
@@ -1175,15 +1242,11 @@ struct thermal_zone_device *thermal_zone_device_register(char *type,
goto unregister;
}
+ result = create_trip_attrs(tz, mask);
+ if (result)
+ goto unregister;
+
for (count = 0; count < trips; count++) {
- result = device_create_file(&tz->device,
- &trip_point_attrs[count * 2]);
- if (result)
- break;
- result = device_create_file(&tz->device,
- &trip_point_attrs[count * 2 + 1]);
- if (result)
- goto unregister;
tz->ops->get_trip_type(tz, count, &trip_type);
if (trip_type == THERMAL_TRIP_PASSIVE)
passive = 1;
@@ -1232,7 +1295,6 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz)
{
struct thermal_cooling_device *cdev;
struct thermal_zone_device *pos = NULL;
- int count;
if (!tz)
return;
@@ -1259,13 +1321,8 @@ void thermal_zone_device_unregister(struct thermal_zone_device *tz)
device_remove_file(&tz->device, &dev_attr_temp);
if (tz->ops->get_mode)
device_remove_file(&tz->device, &dev_attr_mode);
+ remove_trip_attrs(tz);
- for (count = 0; count < tz->trips; count++) {
- device_remove_file(&tz->device,
- &trip_point_attrs[count * 2]);
- device_remove_file(&tz->device,
- &trip_point_attrs[count * 2 + 1]);
- }
thermal_remove_hwmon_sysfs(tz);
release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id);
idr_destroy(&tz->idr);
diff --git a/include/linux/thermal.h b/include/linux/thermal.h
index 796f1ff..6eaf914 100644
--- a/include/linux/thermal.h
+++ b/include/linux/thermal.h
@@ -58,6 +58,8 @@ struct thermal_zone_device_ops {
enum thermal_trip_type *);
int (*get_trip_temp) (struct thermal_zone_device *, int,
unsigned long *);
+ int (*set_trip_temp) (struct thermal_zone_device *, int,
+ unsigned long);
int (*get_crit_temp) (struct thermal_zone_device *, unsigned long *);
int (*notify) (struct thermal_zone_device *, int,
enum thermal_trip_type);
@@ -85,10 +87,17 @@ struct thermal_cooling_device {
((long)t-2732+5)/10 : ((long)t-2732-5)/10)
#define CELSIUS_TO_KELVIN(t) ((t)*10+2732)
+struct thermal_attr {
+ struct device_attribute attr;
+ char name[THERMAL_NAME_LENGTH];
+};
+
struct thermal_zone_device {
int id;
char type[THERMAL_NAME_LENGTH];
struct device device;
+ struct thermal_attr *trip_temp_attrs;
+ struct thermal_attr *trip_type_attrs;
void *devdata;
int trips;
int tc1;
@@ -137,9 +146,9 @@ enum {
};
#define THERMAL_GENL_CMD_MAX (__THERMAL_GENL_CMD_MAX - 1)
-struct thermal_zone_device *thermal_zone_device_register(char *, int, void *,
- const struct thermal_zone_device_ops *, int tc1, int tc2,
- int passive_freq, int polling_freq);
+struct thermal_zone_device *thermal_zone_device_register(char *, int, int,
+ void *, const struct thermal_zone_device_ops *, int tc1,
+ int tc2, int passive_freq, int polling_freq);
void thermal_zone_device_unregister(struct thermal_zone_device *);
int thermal_zone_bind_cooling_device(struct thermal_zone_device *, int,
--
1.7.12.rc0
^ permalink raw reply related
* [PATCH 49/52] ACPI/AC: prevent OOPS on some boxes due to missing check power_supply_register() return value check
From: Len Brown @ 2012-07-25 3:41 UTC (permalink / raw)
To: linux-acpi, linux-pm; +Cc: linux-kernel, Lan Tianyu, stable, Len Brown
In-Reply-To: <6af1c4fc5227af65092ebc848989693562bfa3e8.1343187617.git.len.brown@intel.com>
From: Lan Tianyu <tianyu.lan@intel.com>
In the ac.c, power_supply_register()'s return value is not checked.
As a result, the driver's add() ops may return success
even though the device failed to initialize.
For example, some BIOS may describe two ACADs in the same DSDT.
The second ACAD device will fail to register,
but ACPI driver's add() ops returns sucessfully.
The ACPI device will receive ACPI notification and cause OOPS.
https://bugzilla.redhat.com/show_bug.cgi?id=772730
Signed-off-by: Lan Tianyu <tianyu.lan@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Len Brown <len.brown@intel.com>
---
drivers/acpi/ac.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/acpi/ac.c b/drivers/acpi/ac.c
index 6512b20..d1fcbc0 100644
--- a/drivers/acpi/ac.c
+++ b/drivers/acpi/ac.c
@@ -292,7 +292,9 @@ static int acpi_ac_add(struct acpi_device *device)
ac->charger.properties = ac_props;
ac->charger.num_properties = ARRAY_SIZE(ac_props);
ac->charger.get_property = get_ac_property;
- power_supply_register(&ac->device->dev, &ac->charger);
+ result = power_supply_register(&ac->device->dev, &ac->charger);
+ if (result)
+ goto end;
printk(KERN_INFO PREFIX "%s [%s] (%s)\n",
acpi_device_name(device), acpi_device_bid(device),
--
1.7.12.rc0
^ permalink raw reply related
* [PATCH 48/52] tools/power: turbostat: fix large c1% issue
From: Len Brown @ 2012-07-25 3:41 UTC (permalink / raw)
To: linux-acpi, linux-pm; +Cc: linux-kernel, Len Brown
In-Reply-To: <6af1c4fc5227af65092ebc848989693562bfa3e8.1343187617.git.len.brown@intel.com>
From: Len Brown <len.brown@intel.com>
Under some conditions, c1% was displayed as very large number,
much higher than 100%.
c1% is not measured, it is derived as "that, which is left over"
from other counters. However, the other counters are not collected
atomically, and so it is possible for c1% to be calaculagted as
a small negative number -- displayed as very large positive.
There was a check for mperf vs tsc for this already,
but it needed to also include the other counters
that are used to calculate c1.
Signed-off-by: Len Brown <len.brown@intel.com>
---
tools/power/x86/turbostat/turbostat.c | 12 ++++++++----
1 file changed, 8 insertions(+), 4 deletions(-)
diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c
index b815a12..861d771 100644
--- a/tools/power/x86/turbostat/turbostat.c
+++ b/tools/power/x86/turbostat/turbostat.c
@@ -444,6 +444,9 @@ delta_core(struct core_data *new, struct core_data *old)
old->c7 = new->c7 - old->c7;
}
+/*
+ * old = new - old
+ */
void
delta_thread(struct thread_data *new, struct thread_data *old,
struct core_data *core_delta)
@@ -482,19 +485,20 @@ delta_thread(struct thread_data *new, struct thread_data *old,
/*
- * As mperf and tsc collection are not atomic,
- * it is possible for mperf's non-halted cycles
+ * As counter collection is not atomic,
+ * it is possible for mperf's non-halted cycles + idle states
* to exceed TSC's all cycles: show c1 = 0% in that case.
*/
- if (old->mperf > old->tsc)
+ if ((old->mperf + core_delta->c3 + core_delta->c6 + core_delta->c7) > old->tsc)
old->c1 = 0;
else {
/* normal case, derive c1 */
old->c1 = old->tsc - old->mperf - core_delta->c3
- core_delta->c6 - core_delta->c7;
}
+
if (old->mperf == 0) {
- if (verbose) fprintf(stderr, "cpu%d MPERF 0!\n", old->cpu_id);
+ if (verbose > 1) fprintf(stderr, "cpu%d MPERF 0!\n", old->cpu_id);
old->mperf = 1; /* divide by 0 protection */
}
--
1.7.12.rc0
^ permalink raw reply related
* [PATCH 47/52] tools/power: turbostat v2 - re-write for efficiency
From: Len Brown @ 2012-07-25 3:41 UTC (permalink / raw)
To: linux-acpi, linux-pm; +Cc: linux-kernel, Len Brown
In-Reply-To: <6af1c4fc5227af65092ebc848989693562bfa3e8.1343187617.git.len.brown@intel.com>
From: Len Brown <len.brown@intel.com>
Measuring large profoundly-idle configurations
requires turbostat to be more lightweight.
Otherwise, the operation of turbostat itself
can interfere with the measurements.
This re-write makes turbostat topology aware.
Hardware is accessed in "topology order".
Redundant hardware accesses are deleted.
Redundant output is deleted.
Also, output is buffered and
local RDTSC use replaces remote MSR access for TSC.
>From a feature point of view, the output
looks different since redundant figures are absent.
Also, there are now -c and -p options -- to restrict
output to the 1st thread in each core, and the 1st
thread in each package, respectively. This is helpful
to reduce output on big systems, where more detail
than the "-s" system summary is desired.
Finally, periodic mode output is now on stdout, not stderr.
Turbostat v2 is also slightly more robust in
handling run-time CPU online/offline events,
as it now checks the actual map of on-line cpus rather
than just the total number of on-line cpus.
Signed-off-by: Len Brown <len.brown@intel.com>
---
tools/power/x86/turbostat/Makefile | 1 +
tools/power/x86/turbostat/turbostat.8 | 77 +-
tools/power/x86/turbostat/turbostat.c | 1329 ++++++++++++++++++++-------------
3 files changed, 868 insertions(+), 539 deletions(-)
diff --git a/tools/power/x86/turbostat/Makefile b/tools/power/x86/turbostat/Makefile
index fd8e1f1..f856495 100644
--- a/tools/power/x86/turbostat/Makefile
+++ b/tools/power/x86/turbostat/Makefile
@@ -1,4 +1,5 @@
turbostat : turbostat.c
+CFLAGS += -Wall
clean :
rm -f turbostat
diff --git a/tools/power/x86/turbostat/turbostat.8 b/tools/power/x86/turbostat/turbostat.8
index adf175f..74e4450 100644
--- a/tools/power/x86/turbostat/turbostat.8
+++ b/tools/power/x86/turbostat/turbostat.8
@@ -27,7 +27,11 @@ supports an "invariant" TSC, plus the APERF and MPERF MSRs.
on processors that additionally support C-state residency counters.
.SS Options
-The \fB-s\fP option prints only a 1-line summary for each sample interval.
+The \fB-s\fP option limits output to a 1-line system summary for each interval.
+.PP
+The \fB-c\fP option limits output to the 1st thread in each core.
+.PP
+The \fB-p\fP option limits output to the 1st thread in each package.
.PP
The \fB-v\fP option increases verbosity.
.PP
@@ -65,19 +69,19 @@ Subsequent rows show per-CPU statistics.
.nf
[root@x980]# ./turbostat
cor CPU %c0 GHz TSC %c1 %c3 %c6 %pc3 %pc6
- 0.60 1.63 3.38 2.91 0.00 96.49 0.00 76.64
- 0 0 0.59 1.62 3.38 4.51 0.00 94.90 0.00 76.64
- 0 6 1.13 1.64 3.38 3.97 0.00 94.90 0.00 76.64
- 1 2 0.08 1.62 3.38 0.07 0.00 99.85 0.00 76.64
- 1 8 0.03 1.62 3.38 0.12 0.00 99.85 0.00 76.64
- 2 4 0.01 1.62 3.38 0.06 0.00 99.93 0.00 76.64
- 2 10 0.04 1.62 3.38 0.02 0.00 99.93 0.00 76.64
- 8 1 2.85 1.62 3.38 11.71 0.00 85.44 0.00 76.64
- 8 7 1.98 1.62 3.38 12.58 0.00 85.44 0.00 76.64
- 9 3 0.36 1.62 3.38 0.71 0.00 98.93 0.00 76.64
- 9 9 0.09 1.62 3.38 0.98 0.00 98.93 0.00 76.64
- 10 5 0.03 1.62 3.38 0.09 0.00 99.87 0.00 76.64
- 10 11 0.07 1.62 3.38 0.06 0.00 99.87 0.00 76.64
+ 0.09 1.62 3.38 1.83 0.32 97.76 1.26 83.61
+ 0 0 0.15 1.62 3.38 10.23 0.05 89.56 1.26 83.61
+ 0 6 0.05 1.62 3.38 10.34
+ 1 2 0.03 1.62 3.38 0.07 0.05 99.86
+ 1 8 0.03 1.62 3.38 0.06
+ 2 4 0.21 1.62 3.38 0.10 1.49 98.21
+ 2 10 0.02 1.62 3.38 0.29
+ 8 1 0.04 1.62 3.38 0.04 0.08 99.84
+ 8 7 0.01 1.62 3.38 0.06
+ 9 3 0.53 1.62 3.38 0.10 0.20 99.17
+ 9 9 0.02 1.62 3.38 0.60
+ 10 5 0.01 1.62 3.38 0.02 0.04 99.92
+ 10 11 0.02 1.62 3.38 0.02
.fi
.SH SUMMARY EXAMPLE
The "-s" option prints the column headers just once,
@@ -86,9 +90,10 @@ and then the one line system summary for each sample interval.
.nf
[root@x980]# ./turbostat -s
%c0 GHz TSC %c1 %c3 %c6 %pc3 %pc6
- 0.61 1.89 3.38 5.95 0.00 93.44 0.00 66.33
- 0.52 1.62 3.38 6.83 0.00 92.65 0.00 61.11
- 0.62 1.92 3.38 5.47 0.00 93.91 0.00 67.31
+ 0.23 1.67 3.38 2.00 0.30 97.47 1.07 82.12
+ 0.10 1.62 3.38 1.87 2.25 95.77 12.02 72.60
+ 0.20 1.64 3.38 1.98 0.11 97.72 0.30 83.36
+ 0.11 1.70 3.38 1.86 1.81 96.22 9.71 74.90
.fi
.SH VERBOSE EXAMPLE
The "-v" option adds verbosity to the output:
@@ -120,30 +125,28 @@ until ^C while the other CPUs are mostly idle:
[root@x980 lenb]# ./turbostat cat /dev/zero > /dev/null
^C
cor CPU %c0 GHz TSC %c1 %c3 %c6 %pc3 %pc6
- 8.63 3.64 3.38 14.46 0.49 76.42 0.00 0.00
- 0 0 0.34 3.36 3.38 99.66 0.00 0.00 0.00 0.00
- 0 6 99.96 3.64 3.38 0.04 0.00 0.00 0.00 0.00
- 1 2 0.14 3.50 3.38 1.75 2.04 96.07 0.00 0.00
- 1 8 0.38 3.57 3.38 1.51 2.04 96.07 0.00 0.00
- 2 4 0.01 2.65 3.38 0.06 0.00 99.93 0.00 0.00
- 2 10 0.03 2.12 3.38 0.04 0.00 99.93 0.00 0.00
- 8 1 0.91 3.59 3.38 35.27 0.92 62.90 0.00 0.00
- 8 7 1.61 3.63 3.38 34.57 0.92 62.90 0.00 0.00
- 9 3 0.04 3.38 3.38 0.20 0.00 99.76 0.00 0.00
- 9 9 0.04 3.29 3.38 0.20 0.00 99.76 0.00 0.00
- 10 5 0.03 3.08 3.38 0.12 0.00 99.85 0.00 0.00
- 10 11 0.05 3.07 3.38 0.10 0.00 99.85 0.00 0.00
-4.907015 sec
-
+ 8.86 3.61 3.38 15.06 31.19 44.89 0.00 0.00
+ 0 0 1.46 3.22 3.38 16.84 29.48 52.22 0.00 0.00
+ 0 6 0.21 3.06 3.38 18.09
+ 1 2 0.53 3.33 3.38 2.80 46.40 50.27
+ 1 8 0.89 3.47 3.38 2.44
+ 2 4 1.36 3.43 3.38 9.04 23.71 65.89
+ 2 10 0.18 2.86 3.38 10.22
+ 8 1 0.04 2.87 3.38 99.96 0.01 0.00
+ 8 7 99.72 3.63 3.38 0.27
+ 9 3 0.31 3.21 3.38 7.64 56.55 35.50
+ 9 9 0.08 2.95 3.38 7.88
+ 10 5 1.42 3.43 3.38 2.14 30.99 65.44
+ 10 11 0.16 2.88 3.38 3.40
.fi
-Above the cycle soaker drives cpu6 up 3.6 Ghz turbo limit
+Above the cycle soaker drives cpu7 up its 3.6 Ghz turbo limit
while the other processors are generally in various states of idle.
-Note that cpu0 is an HT sibling sharing core0
-with cpu6, and thus it is unable to get to an idle state
-deeper than c1 while cpu6 is busy.
+Note that cpu1 and cpu7 are HT siblings within core8.
+As cpu7 is very busy, it prevents its sibling, cpu1,
+from entering a c-state deeper than c1.
-Note that turbostat reports average GHz of 3.64, while
+Note that turbostat reports average GHz of 3.63, while
the arithmetic average of the GHz column above is lower.
This is a weighted average, where the weight is %c0. ie. it is the total number of
un-halted cycles elapsed per time divided by the number of CPUs.
diff --git a/tools/power/x86/turbostat/turbostat.c b/tools/power/x86/turbostat/turbostat.c
index 16de7ad..b815a12 100644
--- a/tools/power/x86/turbostat/turbostat.c
+++ b/tools/power/x86/turbostat/turbostat.c
@@ -67,92 +67,119 @@ double bclk;
unsigned int show_pkg;
unsigned int show_core;
unsigned int show_cpu;
+unsigned int show_pkg_only;
+unsigned int show_core_only;
+char *output_buffer, *outp;
int aperf_mperf_unstable;
int backwards_count;
char *progname;
-int num_cpus;
-cpu_set_t *cpu_present_set, *cpu_mask;
-size_t cpu_present_setsize, cpu_mask_size;
-
-struct counters {
- unsigned long long tsc; /* per thread */
- unsigned long long aperf; /* per thread */
- unsigned long long mperf; /* per thread */
- unsigned long long c1; /* per thread (calculated) */
- unsigned long long c3; /* per core */
- unsigned long long c6; /* per core */
- unsigned long long c7; /* per core */
- unsigned long long pc2; /* per package */
- unsigned long long pc3; /* per package */
- unsigned long long pc6; /* per package */
- unsigned long long pc7; /* per package */
- unsigned long long extra_msr; /* per thread */
- int pkg;
- int core;
- int cpu;
- struct counters *next;
-};
-
-struct counters *cnt_even;
-struct counters *cnt_odd;
-struct counters *cnt_delta;
-struct counters *cnt_average;
-struct timeval tv_even;
-struct timeval tv_odd;
-struct timeval tv_delta;
-
-int mark_cpu_present(int pkg, int core, int cpu)
+cpu_set_t *cpu_present_set, *cpu_affinity_set;
+size_t cpu_present_setsize, cpu_affinity_setsize;
+
+struct thread_data {
+ unsigned long long tsc;
+ unsigned long long aperf;
+ unsigned long long mperf;
+ unsigned long long c1; /* derived */
+ unsigned long long extra_msr;
+ unsigned int cpu_id;
+ unsigned int flags;
+#define CPU_IS_FIRST_THREAD_IN_CORE 0x2
+#define CPU_IS_FIRST_CORE_IN_PACKAGE 0x4
+} *thread_even, *thread_odd;
+
+struct core_data {
+ unsigned long long c3;
+ unsigned long long c6;
+ unsigned long long c7;
+ unsigned int core_id;
+} *core_even, *core_odd;
+
+struct pkg_data {
+ unsigned long long pc2;
+ unsigned long long pc3;
+ unsigned long long pc6;
+ unsigned long long pc7;
+ unsigned int package_id;
+} *package_even, *package_odd;
+
+#define ODD_COUNTERS thread_odd, core_odd, package_odd
+#define EVEN_COUNTERS thread_even, core_even, package_even
+
+#define GET_THREAD(thread_base, thread_no, core_no, pkg_no) \
+ (thread_base + (pkg_no) * topo.num_cores_per_pkg * \
+ topo.num_threads_per_core + \
+ (core_no) * topo.num_threads_per_core + (thread_no))
+#define GET_CORE(core_base, core_no, pkg_no) \
+ (core_base + (pkg_no) * topo.num_cores_per_pkg + (core_no))
+#define GET_PKG(pkg_base, pkg_no) (pkg_base + pkg_no)
+
+struct system_summary {
+ struct thread_data threads;
+ struct core_data cores;
+ struct pkg_data packages;
+} sum, average;
+
+
+struct topo_params {
+ int num_packages;
+ int num_cpus;
+ int num_cores;
+ int max_cpu_num;
+ int num_cores_per_pkg;
+ int num_threads_per_core;
+} topo;
+
+struct timeval tv_even, tv_odd, tv_delta;
+
+void setup_all_buffers(void);
+
+int cpu_is_not_present(int cpu)
{
- CPU_SET_S(cpu, cpu_present_setsize, cpu_present_set);
- return 0;
+ return !CPU_ISSET_S(cpu, cpu_present_setsize, cpu_present_set);
}
-
/*
- * cpu_mask_init(ncpus)
- *
- * allocate and clear cpu_mask
- * set cpu_mask_size
+ * run func(thread, core, package) in topology order
+ * skip non-present cpus
*/
-void cpu_mask_init(int ncpus)
+
+int for_all_cpus(int (func)(struct thread_data *, struct core_data *, struct pkg_data *),
+ struct thread_data *thread_base, struct core_data *core_base, struct pkg_data *pkg_base)
{
- cpu_mask = CPU_ALLOC(ncpus);
- if (cpu_mask == NULL) {
- perror("CPU_ALLOC");
- exit(3);
- }
- cpu_mask_size = CPU_ALLOC_SIZE(ncpus);
- CPU_ZERO_S(cpu_mask_size, cpu_mask);
+ int retval, pkg_no, core_no, thread_no;
- /*
- * Allocate and initialize cpu_present_set
- */
- cpu_present_set = CPU_ALLOC(ncpus);
- if (cpu_present_set == NULL) {
- perror("CPU_ALLOC");
- exit(3);
- }
- cpu_present_setsize = CPU_ALLOC_SIZE(ncpus);
- CPU_ZERO_S(cpu_present_setsize, cpu_present_set);
- for_all_cpus(mark_cpu_present);
-}
+ for (pkg_no = 0; pkg_no < topo.num_packages; ++pkg_no) {
+ for (core_no = 0; core_no < topo.num_cores_per_pkg; ++core_no) {
+ for (thread_no = 0; thread_no <
+ topo.num_threads_per_core; ++thread_no) {
+ struct thread_data *t;
+ struct core_data *c;
+ struct pkg_data *p;
-void cpu_mask_uninit()
-{
- CPU_FREE(cpu_mask);
- cpu_mask = NULL;
- cpu_mask_size = 0;
- CPU_FREE(cpu_present_set);
- cpu_present_set = NULL;
- cpu_present_setsize = 0;
+ t = GET_THREAD(thread_base, thread_no, core_no, pkg_no);
+
+ if (cpu_is_not_present(t->cpu_id))
+ continue;
+
+ c = GET_CORE(core_base, core_no, pkg_no);
+ p = GET_PKG(pkg_base, pkg_no);
+
+ retval = func(t, c, p);
+ if (retval)
+ return retval;
+ }
+ }
+ }
+ return 0;
}
int cpu_migrate(int cpu)
{
- CPU_ZERO_S(cpu_mask_size, cpu_mask);
- CPU_SET_S(cpu, cpu_mask_size, cpu_mask);
- if (sched_setaffinity(0, cpu_mask_size, cpu_mask) == -1)
+ CPU_ZERO_S(cpu_affinity_setsize, cpu_affinity_set);
+ CPU_SET_S(cpu, cpu_affinity_setsize, cpu_affinity_set);
+ if (sched_setaffinity(0, cpu_affinity_setsize, cpu_affinity_set) == -1)
return -1;
else
return 0;
@@ -181,67 +208,72 @@ int get_msr(int cpu, off_t offset, unsigned long long *msr)
void print_header(void)
{
if (show_pkg)
- fprintf(stderr, "pk");
+ outp += sprintf(outp, "pk");
if (show_pkg)
- fprintf(stderr, " ");
+ outp += sprintf(outp, " ");
if (show_core)
- fprintf(stderr, "cor");
+ outp += sprintf(outp, "cor");
if (show_cpu)
- fprintf(stderr, " CPU");
+ outp += sprintf(outp, " CPU");
if (show_pkg || show_core || show_cpu)
- fprintf(stderr, " ");
+ outp += sprintf(outp, " ");
if (do_nhm_cstates)
- fprintf(stderr, " %%c0");
+ outp += sprintf(outp, " %%c0");
if (has_aperf)
- fprintf(stderr, " GHz");
- fprintf(stderr, " TSC");
+ outp += sprintf(outp, " GHz");
+ outp += sprintf(outp, " TSC");
if (do_nhm_cstates)
- fprintf(stderr, " %%c1");
+ outp += sprintf(outp, " %%c1");
if (do_nhm_cstates)
- fprintf(stderr, " %%c3");
+ outp += sprintf(outp, " %%c3");
if (do_nhm_cstates)
- fprintf(stderr, " %%c6");
+ outp += sprintf(outp, " %%c6");
if (do_snb_cstates)
- fprintf(stderr, " %%c7");
+ outp += sprintf(outp, " %%c7");
if (do_snb_cstates)
- fprintf(stderr, " %%pc2");
+ outp += sprintf(outp, " %%pc2");
if (do_nhm_cstates)
- fprintf(stderr, " %%pc3");
+ outp += sprintf(outp, " %%pc3");
if (do_nhm_cstates)
- fprintf(stderr, " %%pc6");
+ outp += sprintf(outp, " %%pc6");
if (do_snb_cstates)
- fprintf(stderr, " %%pc7");
+ outp += sprintf(outp, " %%pc7");
if (extra_msr_offset)
- fprintf(stderr, " MSR 0x%x ", extra_msr_offset);
+ outp += sprintf(outp, " MSR 0x%x ", extra_msr_offset);
- putc('\n', stderr);
+ outp += sprintf(outp, "\n");
}
-void dump_cnt(struct counters *cnt)
+int dump_counters(struct thread_data *t, struct core_data *c,
+ struct pkg_data *p)
{
- if (!cnt)
- return;
- if (cnt->pkg) fprintf(stderr, "package: %d ", cnt->pkg);
- if (cnt->core) fprintf(stderr, "core:: %d ", cnt->core);
- if (cnt->cpu) fprintf(stderr, "CPU: %d ", cnt->cpu);
- if (cnt->tsc) fprintf(stderr, "TSC: %016llX\n", cnt->tsc);
- if (cnt->c3) fprintf(stderr, "c3: %016llX\n", cnt->c3);
- if (cnt->c6) fprintf(stderr, "c6: %016llX\n", cnt->c6);
- if (cnt->c7) fprintf(stderr, "c7: %016llX\n", cnt->c7);
- if (cnt->aperf) fprintf(stderr, "aperf: %016llX\n", cnt->aperf);
- if (cnt->pc2) fprintf(stderr, "pc2: %016llX\n", cnt->pc2);
- if (cnt->pc3) fprintf(stderr, "pc3: %016llX\n", cnt->pc3);
- if (cnt->pc6) fprintf(stderr, "pc6: %016llX\n", cnt->pc6);
- if (cnt->pc7) fprintf(stderr, "pc7: %016llX\n", cnt->pc7);
- if (cnt->extra_msr) fprintf(stderr, "msr0x%x: %016llX\n", extra_msr_offset, cnt->extra_msr);
-}
+ fprintf(stderr, "t %p, c %p, p %p\n", t, c, p);
+
+ if (t) {
+ fprintf(stderr, "CPU: %d flags 0x%x\n", t->cpu_id, t->flags);
+ fprintf(stderr, "TSC: %016llX\n", t->tsc);
+ fprintf(stderr, "aperf: %016llX\n", t->aperf);
+ fprintf(stderr, "mperf: %016llX\n", t->mperf);
+ fprintf(stderr, "c1: %016llX\n", t->c1);
+ fprintf(stderr, "msr0x%x: %016llX\n",
+ extra_msr_offset, t->extra_msr);
+ }
-void dump_list(struct counters *cnt)
-{
- printf("dump_list 0x%p\n", cnt);
+ if (c) {
+ fprintf(stderr, "core: %d\n", c->core_id);
+ fprintf(stderr, "c3: %016llX\n", c->c3);
+ fprintf(stderr, "c6: %016llX\n", c->c6);
+ fprintf(stderr, "c7: %016llX\n", c->c7);
+ }
- for (; cnt; cnt = cnt->next)
- dump_cnt(cnt);
+ if (p) {
+ fprintf(stderr, "package: %d\n", p->package_id);
+ fprintf(stderr, "pc2: %016llX\n", p->pc2);
+ fprintf(stderr, "pc3: %016llX\n", p->pc3);
+ fprintf(stderr, "pc6: %016llX\n", p->pc6);
+ fprintf(stderr, "pc7: %016llX\n", p->pc7);
+ }
+ return 0;
}
/*
@@ -253,321 +285,385 @@ void dump_list(struct counters *cnt)
* TSC: "TSC" 3 columns %3.2
* percentage " %pc3" %6.2
*/
-void print_cnt(struct counters *p)
+int format_counters(struct thread_data *t, struct core_data *c,
+ struct pkg_data *p)
{
double interval_float;
+ /* if showing only 1st thread in core and this isn't one, bail out */
+ if (show_core_only && !(t->flags & CPU_IS_FIRST_THREAD_IN_CORE))
+ return 0;
+
+ /* if showing only 1st thread in pkg and this isn't one, bail out */
+ if (show_pkg_only && !(t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE))
+ return 0;
+
interval_float = tv_delta.tv_sec + tv_delta.tv_usec/1000000.0;
- /* topology columns, print blanks on 1st (average) line */
- if (p == cnt_average) {
+ /* topo columns, print blanks on 1st (average) line */
+ if (t == &average.threads) {
if (show_pkg)
- fprintf(stderr, " ");
+ outp += sprintf(outp, " ");
if (show_pkg && show_core)
- fprintf(stderr, " ");
+ outp += sprintf(outp, " ");
if (show_core)
- fprintf(stderr, " ");
+ outp += sprintf(outp, " ");
if (show_cpu)
- fprintf(stderr, " " " ");
+ outp += sprintf(outp, " " " ");
} else {
- if (show_pkg)
- fprintf(stderr, "%2d", p->pkg);
+ if (show_pkg) {
+ if (p)
+ outp += sprintf(outp, "%2d", p->package_id);
+ else
+ outp += sprintf(outp, " ");
+ }
if (show_pkg && show_core)
- fprintf(stderr, " ");
- if (show_core)
- fprintf(stderr, "%3d", p->core);
+ outp += sprintf(outp, " ");
+ if (show_core) {
+ if (c)
+ outp += sprintf(outp, "%3d", c->core_id);
+ else
+ outp += sprintf(outp, " ");
+ }
if (show_cpu)
- fprintf(stderr, " %3d", p->cpu);
+ outp += sprintf(outp, " %3d", t->cpu_id);
}
/* %c0 */
if (do_nhm_cstates) {
if (show_pkg || show_core || show_cpu)
- fprintf(stderr, " ");
+ outp += sprintf(outp, " ");
if (!skip_c0)
- fprintf(stderr, "%6.2f", 100.0 * p->mperf/p->tsc);
+ outp += sprintf(outp, "%6.2f", 100.0 * t->mperf/t->tsc);
else
- fprintf(stderr, " ****");
+ outp += sprintf(outp, " ****");
}
/* GHz */
if (has_aperf) {
if (!aperf_mperf_unstable) {
- fprintf(stderr, " %3.2f",
- 1.0 * p->tsc / units * p->aperf /
- p->mperf / interval_float);
+ outp += sprintf(outp, " %3.2f",
+ 1.0 * t->tsc / units * t->aperf /
+ t->mperf / interval_float);
} else {
- if (p->aperf > p->tsc || p->mperf > p->tsc) {
- fprintf(stderr, " ***");
+ if (t->aperf > t->tsc || t->mperf > t->tsc) {
+ outp += sprintf(outp, " ***");
} else {
- fprintf(stderr, "%3.1f*",
- 1.0 * p->tsc /
- units * p->aperf /
- p->mperf / interval_float);
+ outp += sprintf(outp, "%3.1f*",
+ 1.0 * t->tsc /
+ units * t->aperf /
+ t->mperf / interval_float);
}
}
}
/* TSC */
- fprintf(stderr, "%5.2f", 1.0 * p->tsc/units/interval_float);
+ outp += sprintf(outp, "%5.2f", 1.0 * t->tsc/units/interval_float);
if (do_nhm_cstates) {
if (!skip_c1)
- fprintf(stderr, " %6.2f", 100.0 * p->c1/p->tsc);
+ outp += sprintf(outp, " %6.2f", 100.0 * t->c1/t->tsc);
else
- fprintf(stderr, " ****");
+ outp += sprintf(outp, " ****");
}
+
+ /* print per-core data only for 1st thread in core */
+ if (!(t->flags & CPU_IS_FIRST_THREAD_IN_CORE))
+ goto done;
+
if (do_nhm_cstates)
- fprintf(stderr, " %6.2f", 100.0 * p->c3/p->tsc);
+ outp += sprintf(outp, " %6.2f", 100.0 * c->c3/t->tsc);
if (do_nhm_cstates)
- fprintf(stderr, " %6.2f", 100.0 * p->c6/p->tsc);
+ outp += sprintf(outp, " %6.2f", 100.0 * c->c6/t->tsc);
if (do_snb_cstates)
- fprintf(stderr, " %6.2f", 100.0 * p->c7/p->tsc);
+ outp += sprintf(outp, " %6.2f", 100.0 * c->c7/t->tsc);
+
+ /* print per-package data only for 1st core in package */
+ if (!(t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE))
+ goto done;
+
if (do_snb_cstates)
- fprintf(stderr, " %6.2f", 100.0 * p->pc2/p->tsc);
+ outp += sprintf(outp, " %6.2f", 100.0 * p->pc2/t->tsc);
if (do_nhm_cstates)
- fprintf(stderr, " %6.2f", 100.0 * p->pc3/p->tsc);
+ outp += sprintf(outp, " %6.2f", 100.0 * p->pc3/t->tsc);
if (do_nhm_cstates)
- fprintf(stderr, " %6.2f", 100.0 * p->pc6/p->tsc);
+ outp += sprintf(outp, " %6.2f", 100.0 * p->pc6/t->tsc);
if (do_snb_cstates)
- fprintf(stderr, " %6.2f", 100.0 * p->pc7/p->tsc);
+ outp += sprintf(outp, " %6.2f", 100.0 * p->pc7/t->tsc);
+done:
if (extra_msr_offset)
- fprintf(stderr, " 0x%016llx", p->extra_msr);
- putc('\n', stderr);
+ outp += sprintf(outp, " 0x%016llx", t->extra_msr);
+ outp += sprintf(outp, "\n");
+
+ return 0;
}
-void print_counters(struct counters *counters)
+void flush_stdout()
+{
+ fputs(output_buffer, stdout);
+ outp = output_buffer;
+}
+void flush_stderr()
+{
+ fputs(output_buffer, stderr);
+ outp = output_buffer;
+}
+void format_all_counters(struct thread_data *t, struct core_data *c, struct pkg_data *p)
{
- struct counters *cnt;
static int printed;
-
if (!printed || !summary_only)
print_header();
- if (num_cpus > 1)
- print_cnt(cnt_average);
+ if (topo.num_cpus > 1)
+ format_counters(&average.threads, &average.cores,
+ &average.packages);
printed = 1;
if (summary_only)
return;
- for (cnt = counters; cnt != NULL; cnt = cnt->next)
- print_cnt(cnt);
-
+ for_all_cpus(format_counters, t, c, p);
}
-#define SUBTRACT_COUNTER(after, before, delta) (delta = (after - before), (before > after))
+void
+delta_package(struct pkg_data *new, struct pkg_data *old)
+{
+ old->pc2 = new->pc2 - old->pc2;
+ old->pc3 = new->pc3 - old->pc3;
+ old->pc6 = new->pc6 - old->pc6;
+ old->pc7 = new->pc7 - old->pc7;
+}
-int compute_delta(struct counters *after,
- struct counters *before, struct counters *delta)
+void
+delta_core(struct core_data *new, struct core_data *old)
{
- int errors = 0;
- int perf_err = 0;
+ old->c3 = new->c3 - old->c3;
+ old->c6 = new->c6 - old->c6;
+ old->c7 = new->c7 - old->c7;
+}
- skip_c0 = skip_c1 = 0;
+void
+delta_thread(struct thread_data *new, struct thread_data *old,
+ struct core_data *core_delta)
+{
+ old->tsc = new->tsc - old->tsc;
+
+ /* check for TSC < 1 Mcycles over interval */
+ if (old->tsc < (1000 * 1000)) {
+ fprintf(stderr, "Insanely slow TSC rate, TSC stops in idle?\n");
+ fprintf(stderr, "You can disable all c-states by booting with \"idle=poll\"\n");
+ fprintf(stderr, "or just the deep ones with \"processor.max_cstate=1\"\n");
+ exit(-3);
+ }
- for ( ; after && before && delta;
- after = after->next, before = before->next, delta = delta->next) {
- if (before->cpu != after->cpu) {
- printf("cpu configuration changed: %d != %d\n",
- before->cpu, after->cpu);
- return -1;
- }
+ old->c1 = new->c1 - old->c1;
- if (SUBTRACT_COUNTER(after->tsc, before->tsc, delta->tsc)) {
- fprintf(stderr, "cpu%d TSC went backwards %llX to %llX\n",
- before->cpu, before->tsc, after->tsc);
- errors++;
- }
- /* check for TSC < 1 Mcycles over interval */
- if (delta->tsc < (1000 * 1000)) {
- fprintf(stderr, "Insanely slow TSC rate,"
- " TSC stops in idle?\n");
- fprintf(stderr, "You can disable all c-states"
- " by booting with \"idle=poll\"\n");
- fprintf(stderr, "or just the deep ones with"
- " \"processor.max_cstate=1\"\n");
- exit(-3);
- }
- if (SUBTRACT_COUNTER(after->c3, before->c3, delta->c3)) {
- fprintf(stderr, "cpu%d c3 counter went backwards %llX to %llX\n",
- before->cpu, before->c3, after->c3);
- errors++;
- }
- if (SUBTRACT_COUNTER(after->c6, before->c6, delta->c6)) {
- fprintf(stderr, "cpu%d c6 counter went backwards %llX to %llX\n",
- before->cpu, before->c6, after->c6);
- errors++;
- }
- if (SUBTRACT_COUNTER(after->c7, before->c7, delta->c7)) {
- fprintf(stderr, "cpu%d c7 counter went backwards %llX to %llX\n",
- before->cpu, before->c7, after->c7);
- errors++;
- }
- if (SUBTRACT_COUNTER(after->pc2, before->pc2, delta->pc2)) {
- fprintf(stderr, "cpu%d pc2 counter went backwards %llX to %llX\n",
- before->cpu, before->pc2, after->pc2);
- errors++;
- }
- if (SUBTRACT_COUNTER(after->pc3, before->pc3, delta->pc3)) {
- fprintf(stderr, "cpu%d pc3 counter went backwards %llX to %llX\n",
- before->cpu, before->pc3, after->pc3);
- errors++;
- }
- if (SUBTRACT_COUNTER(after->pc6, before->pc6, delta->pc6)) {
- fprintf(stderr, "cpu%d pc6 counter went backwards %llX to %llX\n",
- before->cpu, before->pc6, after->pc6);
- errors++;
- }
- if (SUBTRACT_COUNTER(after->pc7, before->pc7, delta->pc7)) {
- fprintf(stderr, "cpu%d pc7 counter went backwards %llX to %llX\n",
- before->cpu, before->pc7, after->pc7);
- errors++;
- }
+ if ((new->aperf > old->aperf) && (new->mperf > old->mperf)) {
+ old->aperf = new->aperf - old->aperf;
+ old->mperf = new->mperf - old->mperf;
+ } else {
- perf_err = SUBTRACT_COUNTER(after->aperf, before->aperf, delta->aperf);
- if (perf_err) {
- fprintf(stderr, "cpu%d aperf counter went backwards %llX to %llX\n",
- before->cpu, before->aperf, after->aperf);
- }
- perf_err |= SUBTRACT_COUNTER(after->mperf, before->mperf, delta->mperf);
- if (perf_err) {
- fprintf(stderr, "cpu%d mperf counter went backwards %llX to %llX\n",
- before->cpu, before->mperf, after->mperf);
- }
- if (perf_err) {
- if (!aperf_mperf_unstable) {
- fprintf(stderr, "%s: APERF or MPERF went backwards *\n", progname);
- fprintf(stderr, "* Frequency results do not cover entire interval *\n");
- fprintf(stderr, "* fix this by running Linux-2.6.30 or later *\n");
+ if (!aperf_mperf_unstable) {
+ fprintf(stderr, "%s: APERF or MPERF went backwards *\n", progname);
+ fprintf(stderr, "* Frequency results do not cover entire interval *\n");
+ fprintf(stderr, "* fix this by running Linux-2.6.30 or later *\n");
- aperf_mperf_unstable = 1;
- }
- /*
- * mperf delta is likely a huge "positive" number
- * can not use it for calculating c0 time
- */
- skip_c0 = 1;
- skip_c1 = 1;
+ aperf_mperf_unstable = 1;
}
-
/*
- * As mperf and tsc collection are not atomic,
- * it is possible for mperf's non-halted cycles
- * to exceed TSC's all cycles: show c1 = 0% in that case.
+ * mperf delta is likely a huge "positive" number
+ * can not use it for calculating c0 time
*/
- if (delta->mperf > delta->tsc)
- delta->c1 = 0;
- else /* normal case, derive c1 */
- delta->c1 = delta->tsc - delta->mperf
- - delta->c3 - delta->c6 - delta->c7;
+ skip_c0 = 1;
+ skip_c1 = 1;
+ }
- if (delta->mperf == 0)
- delta->mperf = 1; /* divide by 0 protection */
- /*
- * for "extra msr", just copy the latest w/o subtracting
- */
- delta->extra_msr = after->extra_msr;
- if (errors) {
- fprintf(stderr, "ERROR cpu%d before:\n", before->cpu);
- dump_cnt(before);
- fprintf(stderr, "ERROR cpu%d after:\n", before->cpu);
- dump_cnt(after);
- errors = 0;
- }
+ /*
+ * As mperf and tsc collection are not atomic,
+ * it is possible for mperf's non-halted cycles
+ * to exceed TSC's all cycles: show c1 = 0% in that case.
+ */
+ if (old->mperf > old->tsc)
+ old->c1 = 0;
+ else {
+ /* normal case, derive c1 */
+ old->c1 = old->tsc - old->mperf - core_delta->c3
+ - core_delta->c6 - core_delta->c7;
+ }
+ if (old->mperf == 0) {
+ if (verbose) fprintf(stderr, "cpu%d MPERF 0!\n", old->cpu_id);
+ old->mperf = 1; /* divide by 0 protection */
}
+
+ /*
+ * for "extra msr", just copy the latest w/o subtracting
+ */
+ old->extra_msr = new->extra_msr;
+}
+
+int delta_cpu(struct thread_data *t, struct core_data *c,
+ struct pkg_data *p, struct thread_data *t2,
+ struct core_data *c2, struct pkg_data *p2)
+{
+ /* calculate core delta only for 1st thread in core */
+ if (t->flags & CPU_IS_FIRST_THREAD_IN_CORE)
+ delta_core(c, c2);
+
+ /* always calculate thread delta */
+ delta_thread(t, t2, c2); /* c2 is core delta */
+
+ /* calculate package delta only for 1st core in package */
+ if (t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE)
+ delta_package(p, p2);
+
return 0;
}
-void compute_average(struct counters *delta, struct counters *avg)
+void clear_counters(struct thread_data *t, struct core_data *c, struct pkg_data *p)
+{
+ t->tsc = 0;
+ t->aperf = 0;
+ t->mperf = 0;
+ t->c1 = 0;
+
+ /* tells format_counters to dump all fields from this set */
+ t->flags = CPU_IS_FIRST_THREAD_IN_CORE | CPU_IS_FIRST_CORE_IN_PACKAGE;
+
+ c->c3 = 0;
+ c->c6 = 0;
+ c->c7 = 0;
+
+ p->pc2 = 0;
+ p->pc3 = 0;
+ p->pc6 = 0;
+ p->pc7 = 0;
+}
+int sum_counters(struct thread_data *t, struct core_data *c,
+ struct pkg_data *p)
{
- struct counters *sum;
+ average.threads.tsc += t->tsc;
+ average.threads.aperf += t->aperf;
+ average.threads.mperf += t->mperf;
+ average.threads.c1 += t->c1;
- sum = calloc(1, sizeof(struct counters));
- if (sum == NULL) {
- perror("calloc sum");
- exit(1);
- }
+ /* sum per-core values only for 1st thread in core */
+ if (!(t->flags & CPU_IS_FIRST_THREAD_IN_CORE))
+ return 0;
- for (; delta; delta = delta->next) {
- sum->tsc += delta->tsc;
- sum->c1 += delta->c1;
- sum->c3 += delta->c3;
- sum->c6 += delta->c6;
- sum->c7 += delta->c7;
- sum->aperf += delta->aperf;
- sum->mperf += delta->mperf;
- sum->pc2 += delta->pc2;
- sum->pc3 += delta->pc3;
- sum->pc6 += delta->pc6;
- sum->pc7 += delta->pc7;
- }
- avg->tsc = sum->tsc/num_cpus;
- avg->c1 = sum->c1/num_cpus;
- avg->c3 = sum->c3/num_cpus;
- avg->c6 = sum->c6/num_cpus;
- avg->c7 = sum->c7/num_cpus;
- avg->aperf = sum->aperf/num_cpus;
- avg->mperf = sum->mperf/num_cpus;
- avg->pc2 = sum->pc2/num_cpus;
- avg->pc3 = sum->pc3/num_cpus;
- avg->pc6 = sum->pc6/num_cpus;
- avg->pc7 = sum->pc7/num_cpus;
-
- free(sum);
+ average.cores.c3 += c->c3;
+ average.cores.c6 += c->c6;
+ average.cores.c7 += c->c7;
+
+ /* sum per-pkg values only for 1st core in pkg */
+ if (!(t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE))
+ return 0;
+
+ average.packages.pc2 += p->pc2;
+ average.packages.pc3 += p->pc3;
+ average.packages.pc6 += p->pc6;
+ average.packages.pc7 += p->pc7;
+
+ return 0;
+}
+/*
+ * sum the counters for all cpus in the system
+ * compute the weighted average
+ */
+void compute_average(struct thread_data *t, struct core_data *c,
+ struct pkg_data *p)
+{
+ clear_counters(&average.threads, &average.cores, &average.packages);
+
+ for_all_cpus(sum_counters, t, c, p);
+
+ average.threads.tsc /= topo.num_cpus;
+ average.threads.aperf /= topo.num_cpus;
+ average.threads.mperf /= topo.num_cpus;
+ average.threads.c1 /= topo.num_cpus;
+
+ average.cores.c3 /= topo.num_cores;
+ average.cores.c6 /= topo.num_cores;
+ average.cores.c7 /= topo.num_cores;
+
+ average.packages.pc2 /= topo.num_packages;
+ average.packages.pc3 /= topo.num_packages;
+ average.packages.pc6 /= topo.num_packages;
+ average.packages.pc7 /= topo.num_packages;
}
-int get_counters(struct counters *cnt)
+static unsigned long long rdtsc(void)
{
- for ( ; cnt; cnt = cnt->next) {
+ unsigned int low, high;
- if (cpu_migrate(cnt->cpu))
- return -1;
+ asm volatile("rdtsc" : "=a" (low), "=d" (high));
- if (get_msr(cnt->cpu, MSR_TSC, &cnt->tsc))
- return -1;
+ return low | ((unsigned long long)high) << 32;
+}
- if (has_aperf) {
- if (get_msr(cnt->cpu, MSR_APERF, &cnt->aperf))
- return -1;
- if (get_msr(cnt->cpu, MSR_MPERF, &cnt->mperf))
- return -1;
- }
- if (do_nhm_cstates) {
- if (get_msr(cnt->cpu, MSR_CORE_C3_RESIDENCY, &cnt->c3))
- return -1;
- if (get_msr(cnt->cpu, MSR_CORE_C6_RESIDENCY, &cnt->c6))
- return -1;
- }
+/*
+ * get_counters(...)
+ * migrate to cpu
+ * acquire and record local counters for that cpu
+ */
+int get_counters(struct thread_data *t, struct core_data *c, struct pkg_data *p)
+{
+ int cpu = t->cpu_id;
- if (do_snb_cstates)
- if (get_msr(cnt->cpu, MSR_CORE_C7_RESIDENCY, &cnt->c7))
- return -1;
+ if (cpu_migrate(cpu))
+ return -1;
- if (do_nhm_cstates) {
- if (get_msr(cnt->cpu, MSR_PKG_C3_RESIDENCY, &cnt->pc3))
- return -1;
- if (get_msr(cnt->cpu, MSR_PKG_C6_RESIDENCY, &cnt->pc6))
- return -1;
- }
- if (do_snb_cstates) {
- if (get_msr(cnt->cpu, MSR_PKG_C2_RESIDENCY, &cnt->pc2))
- return -1;
- if (get_msr(cnt->cpu, MSR_PKG_C7_RESIDENCY, &cnt->pc7))
- return -1;
- }
- if (extra_msr_offset)
- if (get_msr(cnt->cpu, extra_msr_offset, &cnt->extra_msr))
- return -1;
+ t->tsc = rdtsc(); /* we are running on local CPU of interest */
+
+ if (has_aperf) {
+ if (get_msr(cpu, MSR_APERF, &t->aperf))
+ return -3;
+ if (get_msr(cpu, MSR_MPERF, &t->mperf))
+ return -4;
+ }
+
+ if (extra_msr_offset)
+ if (get_msr(cpu, extra_msr_offset, &t->extra_msr))
+ return -5;
+
+ /* collect core counters only for 1st thread in core */
+ if (!(t->flags & CPU_IS_FIRST_THREAD_IN_CORE))
+ return 0;
+
+ if (do_nhm_cstates) {
+ if (get_msr(cpu, MSR_CORE_C3_RESIDENCY, &c->c3))
+ return -6;
+ if (get_msr(cpu, MSR_CORE_C6_RESIDENCY, &c->c6))
+ return -7;
+ }
+
+ if (do_snb_cstates)
+ if (get_msr(cpu, MSR_CORE_C7_RESIDENCY, &c->c7))
+ return -8;
+
+ /* collect package counters only for 1st core in package */
+ if (!(t->flags & CPU_IS_FIRST_CORE_IN_PACKAGE))
+ return 0;
+
+ if (do_nhm_cstates) {
+ if (get_msr(cpu, MSR_PKG_C3_RESIDENCY, &p->pc3))
+ return -9;
+ if (get_msr(cpu, MSR_PKG_C6_RESIDENCY, &p->pc6))
+ return -10;
+ }
+ if (do_snb_cstates) {
+ if (get_msr(cpu, MSR_PKG_C2_RESIDENCY, &p->pc2))
+ return -11;
+ if (get_msr(cpu, MSR_PKG_C7_RESIDENCY, &p->pc7))
+ return -12;
}
return 0;
}
-void print_nehalem_info(void)
+void print_verbose_header(void)
{
unsigned long long msr;
unsigned int ratio;
@@ -615,143 +711,82 @@ void print_nehalem_info(void)
}
-void free_counter_list(struct counters *list)
+void free_all_buffers(void)
{
- struct counters *p;
+ CPU_FREE(cpu_present_set);
+ cpu_present_set = NULL;
+ cpu_present_set = 0;
- for (p = list; p; ) {
- struct counters *free_me;
+ CPU_FREE(cpu_affinity_set);
+ cpu_affinity_set = NULL;
+ cpu_affinity_setsize = 0;
- free_me = p;
- p = p->next;
- free(free_me);
- }
-}
+ free(thread_even);
+ free(core_even);
+ free(package_even);
-void free_all_counters(void)
-{
- free_counter_list(cnt_even);
- cnt_even = NULL;
+ thread_even = NULL;
+ core_even = NULL;
+ package_even = NULL;
- free_counter_list(cnt_odd);
- cnt_odd = NULL;
+ free(thread_odd);
+ free(core_odd);
+ free(package_odd);
- free_counter_list(cnt_delta);
- cnt_delta = NULL;
+ thread_odd = NULL;
+ core_odd = NULL;
+ package_odd = NULL;
- free_counter_list(cnt_average);
- cnt_average = NULL;
+ free(output_buffer);
+ output_buffer = NULL;
+ outp = NULL;
}
-void insert_counters(struct counters **list,
- struct counters *new)
+/*
+ * cpu_is_first_sibling_in_core(cpu)
+ * return 1 if given CPU is 1st HT sibling in the core
+ */
+int cpu_is_first_sibling_in_core(int cpu)
{
- struct counters *prev;
-
- /*
- * list was empty
- */
- if (*list == NULL) {
- new->next = *list;
- *list = new;
- return;
- }
-
- if (!summary_only)
- show_cpu = 1; /* there is more than one CPU */
-
- /*
- * insert on front of list.
- * It is sorted by ascending package#, core#, cpu#
- */
- if (((*list)->pkg > new->pkg) ||
- (((*list)->pkg == new->pkg) && ((*list)->core > new->core)) ||
- (((*list)->pkg == new->pkg) && ((*list)->core == new->core) && ((*list)->cpu > new->cpu))) {
- new->next = *list;
- *list = new;
- return;
- }
-
- prev = *list;
-
- while (prev->next && (prev->next->pkg < new->pkg)) {
- prev = prev->next;
- if (!summary_only)
- show_pkg = 1; /* there is more than 1 package */
- }
-
- while (prev->next && (prev->next->pkg == new->pkg)
- && (prev->next->core < new->core)) {
- prev = prev->next;
- if (!summary_only)
- show_core = 1; /* there is more than 1 core */
- }
+ char path[64];
+ FILE *filep;
+ int first_cpu;
- while (prev->next && (prev->next->pkg == new->pkg)
- && (prev->next->core == new->core)
- && (prev->next->cpu < new->cpu)) {
- prev = prev->next;
+ sprintf(path, "/sys/devices/system/cpu/cpu%d/topology/thread_siblings_list", cpu);
+ filep = fopen(path, "r");
+ if (filep == NULL) {
+ perror(path);
+ exit(1);
}
-
- /*
- * insert after "prev"
- */
- new->next = prev->next;
- prev->next = new;
+ fscanf(filep, "%d", &first_cpu);
+ fclose(filep);
+ return (cpu == first_cpu);
}
-void alloc_new_counters(int pkg, int core, int cpu)
+/*
+ * cpu_is_first_core_in_package(cpu)
+ * return 1 if given CPU is 1st core in package
+ */
+int cpu_is_first_core_in_package(int cpu)
{
- struct counters *new;
-
- if (verbose > 1)
- printf("pkg%d core%d, cpu%d\n", pkg, core, cpu);
-
- new = (struct counters *)calloc(1, sizeof(struct counters));
- if (new == NULL) {
- perror("calloc");
- exit(1);
- }
- new->pkg = pkg;
- new->core = core;
- new->cpu = cpu;
- insert_counters(&cnt_odd, new);
-
- new = (struct counters *)calloc(1,
- sizeof(struct counters));
- if (new == NULL) {
- perror("calloc");
- exit(1);
- }
- new->pkg = pkg;
- new->core = core;
- new->cpu = cpu;
- insert_counters(&cnt_even, new);
-
- new = (struct counters *)calloc(1, sizeof(struct counters));
- if (new == NULL) {
- perror("calloc");
- exit(1);
- }
- new->pkg = pkg;
- new->core = core;
- new->cpu = cpu;
- insert_counters(&cnt_delta, new);
+ char path[64];
+ FILE *filep;
+ int first_cpu;
- new = (struct counters *)calloc(1, sizeof(struct counters));
- if (new == NULL) {
- perror("calloc");
+ sprintf(path, "/sys/devices/system/cpu/cpu%d/topology/core_siblings_list", cpu);
+ filep = fopen(path, "r");
+ if (filep == NULL) {
+ perror(path);
exit(1);
}
- new->pkg = pkg;
- new->core = core;
- new->cpu = cpu;
- cnt_average = new;
+ fscanf(filep, "%d", &first_cpu);
+ fclose(filep);
+ return (cpu == first_cpu);
}
int get_physical_package_id(int cpu)
{
- char path[64];
+ char path[80];
FILE *filep;
int pkg;
@@ -768,7 +803,7 @@ int get_physical_package_id(int cpu)
int get_core_id(int cpu)
{
- char path[64];
+ char path[80];
FILE *filep;
int core;
@@ -783,14 +818,87 @@ int get_core_id(int cpu)
return core;
}
+int get_num_ht_siblings(int cpu)
+{
+ char path[80];
+ FILE *filep;
+ int sib1, sib2;
+ int matches;
+ char character;
+
+ sprintf(path, "/sys/devices/system/cpu/cpu%d/topology/thread_siblings_list", cpu);
+ filep = fopen(path, "r");
+ if (filep == NULL) {
+ perror(path);
+ exit(1);
+ }
+ /*
+ * file format:
+ * if a pair of number with a character between: 2 siblings (eg. 1-2, or 1,4)
+ * otherwinse 1 sibling (self).
+ */
+ matches = fscanf(filep, "%d%c%d\n", &sib1, &character, &sib2);
+
+ fclose(filep);
+
+ if (matches == 3)
+ return 2;
+ else
+ return 1;
+}
+
/*
- * run func(pkg, core, cpu) on every cpu in /proc/stat
+ * run func(thread, core, package) in topology order
+ * skip non-present cpus
*/
-int for_all_cpus(void (func)(int, int, int))
+int for_all_cpus_2(int (func)(struct thread_data *, struct core_data *,
+ struct pkg_data *, struct thread_data *, struct core_data *,
+ struct pkg_data *), struct thread_data *thread_base,
+ struct core_data *core_base, struct pkg_data *pkg_base,
+ struct thread_data *thread_base2, struct core_data *core_base2,
+ struct pkg_data *pkg_base2)
+{
+ int retval, pkg_no, core_no, thread_no;
+
+ for (pkg_no = 0; pkg_no < topo.num_packages; ++pkg_no) {
+ for (core_no = 0; core_no < topo.num_cores_per_pkg; ++core_no) {
+ for (thread_no = 0; thread_no <
+ topo.num_threads_per_core; ++thread_no) {
+ struct thread_data *t, *t2;
+ struct core_data *c, *c2;
+ struct pkg_data *p, *p2;
+
+ t = GET_THREAD(thread_base, thread_no, core_no, pkg_no);
+
+ if (cpu_is_not_present(t->cpu_id))
+ continue;
+
+ t2 = GET_THREAD(thread_base2, thread_no, core_no, pkg_no);
+
+ c = GET_CORE(core_base, core_no, pkg_no);
+ c2 = GET_CORE(core_base2, core_no, pkg_no);
+
+ p = GET_PKG(pkg_base, pkg_no);
+ p2 = GET_PKG(pkg_base2, pkg_no);
+
+ retval = func(t, c, p, t2, c2, p2);
+ if (retval)
+ return retval;
+ }
+ }
+ }
+ return 0;
+}
+
+/*
+ * run func(cpu) on every cpu in /proc/stat
+ * return max_cpu number
+ */
+int for_all_proc_cpus(int (func)(int))
{
FILE *fp;
- int cpu_count;
+ int cpu_num;
int retval;
fp = fopen(proc_stat, "r");
@@ -805,78 +913,88 @@ int for_all_cpus(void (func)(int, int, int))
exit(1);
}
- for (cpu_count = 0; ; cpu_count++) {
- int cpu;
-
- retval = fscanf(fp, "cpu%u %*d %*d %*d %*d %*d %*d %*d %*d %*d %*d\n", &cpu);
+ while (1) {
+ retval = fscanf(fp, "cpu%u %*d %*d %*d %*d %*d %*d %*d %*d %*d %*d\n", &cpu_num);
if (retval != 1)
break;
- func(get_physical_package_id(cpu), get_core_id(cpu), cpu);
+ retval = func(cpu_num);
+ if (retval) {
+ fclose(fp);
+ return(retval);
+ }
}
fclose(fp);
- return cpu_count;
+ return 0;
}
void re_initialize(void)
{
- free_all_counters();
- num_cpus = for_all_cpus(alloc_new_counters);
- cpu_mask_uninit();
- cpu_mask_init(num_cpus);
- printf("turbostat: re-initialized with num_cpus %d\n", num_cpus);
+ free_all_buffers();
+ setup_all_buffers();
+ printf("turbostat: re-initialized with num_cpus %d\n", topo.num_cpus);
}
-void dummy(int pkg, int core, int cpu) { return; }
+
/*
- * check to see if a cpu came on-line
+ * count_cpus()
+ * remember the last one seen, it will be the max
*/
-int verify_num_cpus(void)
+int count_cpus(int cpu)
{
- int new_num_cpus;
+ if (topo.max_cpu_num < cpu)
+ topo.max_cpu_num = cpu;
- new_num_cpus = for_all_cpus(dummy);
-
- if (new_num_cpus != num_cpus) {
- if (verbose)
- printf("num_cpus was %d, is now %d\n",
- num_cpus, new_num_cpus);
- return -1;
- }
+ topo.num_cpus += 1;
+ return 0;
+}
+int mark_cpu_present(int cpu)
+{
+ CPU_SET_S(cpu, cpu_present_setsize, cpu_present_set);
return 0;
}
void turbostat_loop()
{
+ int retval;
+
restart:
- get_counters(cnt_even);
+ retval = for_all_cpus(get_counters, EVEN_COUNTERS);
+ if (retval) {
+ re_initialize();
+ goto restart;
+ }
gettimeofday(&tv_even, (struct timezone *)NULL);
while (1) {
- if (verify_num_cpus()) {
+ if (for_all_proc_cpus(cpu_is_not_present)) {
re_initialize();
goto restart;
}
sleep(interval_sec);
- if (get_counters(cnt_odd)) {
+ retval = for_all_cpus(get_counters, ODD_COUNTERS);
+ if (retval) {
re_initialize();
goto restart;
}
gettimeofday(&tv_odd, (struct timezone *)NULL);
- compute_delta(cnt_odd, cnt_even, cnt_delta);
timersub(&tv_odd, &tv_even, &tv_delta);
- compute_average(cnt_delta, cnt_average);
- print_counters(cnt_delta);
+ for_all_cpus_2(delta_cpu, ODD_COUNTERS, EVEN_COUNTERS);
+ compute_average(EVEN_COUNTERS);
+ format_all_counters(EVEN_COUNTERS);
+ flush_stdout();
sleep(interval_sec);
- if (get_counters(cnt_even)) {
+ retval = for_all_cpus(get_counters, EVEN_COUNTERS);
+ if (retval) {
re_initialize();
goto restart;
}
gettimeofday(&tv_even, (struct timezone *)NULL);
- compute_delta(cnt_even, cnt_odd, cnt_delta);
timersub(&tv_even, &tv_odd, &tv_delta);
- compute_average(cnt_delta, cnt_average);
- print_counters(cnt_delta);
+ for_all_cpus_2(delta_cpu, EVEN_COUNTERS, ODD_COUNTERS);
+ compute_average(ODD_COUNTERS);
+ format_all_counters(ODD_COUNTERS);
+ flush_stdout();
}
}
@@ -1051,6 +1169,208 @@ int open_dev_cpu_msr(int dummy1)
return 0;
}
+void topology_probe()
+{
+ int i;
+ int max_core_id = 0;
+ int max_package_id = 0;
+ int max_siblings = 0;
+ struct cpu_topology {
+ int core_id;
+ int physical_package_id;
+ } *cpus;
+
+ /* Initialize num_cpus, max_cpu_num */
+ topo.num_cpus = 0;
+ topo.max_cpu_num = 0;
+ for_all_proc_cpus(count_cpus);
+ if (!summary_only && topo.num_cpus > 1)
+ show_cpu = 1;
+
+ if (verbose > 1)
+ fprintf(stderr, "num_cpus %d max_cpu_num %d\n", topo.num_cpus, topo.max_cpu_num);
+
+ cpus = calloc(1, (topo.max_cpu_num + 1) * sizeof(struct cpu_topology));
+ if (cpus == NULL) {
+ perror("calloc cpus");
+ exit(1);
+ }
+
+ /*
+ * Allocate and initialize cpu_present_set
+ */
+ cpu_present_set = CPU_ALLOC((topo.max_cpu_num + 1));
+ if (cpu_present_set == NULL) {
+ perror("CPU_ALLOC");
+ exit(3);
+ }
+ cpu_present_setsize = CPU_ALLOC_SIZE((topo.max_cpu_num + 1));
+ CPU_ZERO_S(cpu_present_setsize, cpu_present_set);
+ for_all_proc_cpus(mark_cpu_present);
+
+ /*
+ * Allocate and initialize cpu_affinity_set
+ */
+ cpu_affinity_set = CPU_ALLOC((topo.max_cpu_num + 1));
+ if (cpu_affinity_set == NULL) {
+ perror("CPU_ALLOC");
+ exit(3);
+ }
+ cpu_affinity_setsize = CPU_ALLOC_SIZE((topo.max_cpu_num + 1));
+ CPU_ZERO_S(cpu_affinity_setsize, cpu_affinity_set);
+
+
+ /*
+ * For online cpus
+ * find max_core_id, max_package_id
+ */
+ for (i = 0; i <= topo.max_cpu_num; ++i) {
+ int siblings;
+
+ if (cpu_is_not_present(i)) {
+ if (verbose > 1)
+ fprintf(stderr, "cpu%d NOT PRESENT\n", i);
+ continue;
+ }
+ cpus[i].core_id = get_core_id(i);
+ if (cpus[i].core_id > max_core_id)
+ max_core_id = cpus[i].core_id;
+
+ cpus[i].physical_package_id = get_physical_package_id(i);
+ if (cpus[i].physical_package_id > max_package_id)
+ max_package_id = cpus[i].physical_package_id;
+
+ siblings = get_num_ht_siblings(i);
+ if (siblings > max_siblings)
+ max_siblings = siblings;
+ if (verbose > 1)
+ fprintf(stderr, "cpu %d pkg %d core %d\n",
+ i, cpus[i].physical_package_id, cpus[i].core_id);
+ }
+ topo.num_cores_per_pkg = max_core_id + 1;
+ if (verbose > 1)
+ fprintf(stderr, "max_core_id %d, sizing for %d cores per package\n",
+ max_core_id, topo.num_cores_per_pkg);
+ if (!summary_only && topo.num_cores_per_pkg > 1)
+ show_core = 1;
+
+ topo.num_packages = max_package_id + 1;
+ if (verbose > 1)
+ fprintf(stderr, "max_package_id %d, sizing for %d packages\n",
+ max_package_id, topo.num_packages);
+ if (!summary_only && topo.num_packages > 1)
+ show_pkg = 1;
+
+ topo.num_threads_per_core = max_siblings;
+ if (verbose > 1)
+ fprintf(stderr, "max_siblings %d\n", max_siblings);
+
+ free(cpus);
+}
+
+void
+allocate_counters(struct thread_data **t, struct core_data **c, struct pkg_data **p)
+{
+ int i;
+
+ *t = calloc(topo.num_threads_per_core * topo.num_cores_per_pkg *
+ topo.num_packages, sizeof(struct thread_data));
+ if (*t == NULL)
+ goto error;
+
+ for (i = 0; i < topo.num_threads_per_core *
+ topo.num_cores_per_pkg * topo.num_packages; i++)
+ (*t)[i].cpu_id = -1;
+
+ *c = calloc(topo.num_cores_per_pkg * topo.num_packages,
+ sizeof(struct core_data));
+ if (*c == NULL)
+ goto error;
+
+ for (i = 0; i < topo.num_cores_per_pkg * topo.num_packages; i++)
+ (*c)[i].core_id = -1;
+
+ *p = calloc(topo.num_packages, sizeof(struct pkg_data));
+ if (*p == NULL)
+ goto error;
+
+ for (i = 0; i < topo.num_packages; i++)
+ (*p)[i].package_id = i;
+
+ return;
+error:
+ perror("calloc counters");
+ exit(1);
+}
+/*
+ * init_counter()
+ *
+ * set cpu_id, core_num, pkg_num
+ * set FIRST_THREAD_IN_CORE and FIRST_CORE_IN_PACKAGE
+ *
+ * increment topo.num_cores when 1st core in pkg seen
+ */
+void init_counter(struct thread_data *thread_base, struct core_data *core_base,
+ struct pkg_data *pkg_base, int thread_num, int core_num,
+ int pkg_num, int cpu_id)
+{
+ struct thread_data *t;
+ struct core_data *c;
+ struct pkg_data *p;
+
+ t = GET_THREAD(thread_base, thread_num, core_num, pkg_num);
+ c = GET_CORE(core_base, core_num, pkg_num);
+ p = GET_PKG(pkg_base, pkg_num);
+
+ t->cpu_id = cpu_id;
+ if (thread_num == 0) {
+ t->flags |= CPU_IS_FIRST_THREAD_IN_CORE;
+ if (cpu_is_first_core_in_package(cpu_id))
+ t->flags |= CPU_IS_FIRST_CORE_IN_PACKAGE;
+ }
+
+ c->core_id = core_num;
+ p->package_id = pkg_num;
+}
+
+
+int initialize_counters(int cpu_id)
+{
+ int my_thread_id, my_core_id, my_package_id;
+
+ my_package_id = get_physical_package_id(cpu_id);
+ my_core_id = get_core_id(cpu_id);
+
+ if (cpu_is_first_sibling_in_core(cpu_id)) {
+ my_thread_id = 0;
+ topo.num_cores++;
+ } else {
+ my_thread_id = 1;
+ }
+
+ init_counter(EVEN_COUNTERS, my_thread_id, my_core_id, my_package_id, cpu_id);
+ init_counter(ODD_COUNTERS, my_thread_id, my_core_id, my_package_id, cpu_id);
+ return 0;
+}
+
+void allocate_output_buffer()
+{
+ output_buffer = calloc(1, (1 + topo.num_cpus) * 128);
+ outp = output_buffer;
+ if (outp == NULL) {
+ perror("calloc");
+ exit(-1);
+ }
+}
+
+void setup_all_buffers(void)
+{
+ topology_probe();
+ allocate_counters(&thread_even, &core_even, &package_even);
+ allocate_counters(&thread_odd, &core_odd, &package_odd);
+ allocate_output_buffer();
+ for_all_proc_cpus(initialize_counters);
+}
void turbostat_init()
{
check_cpuid();
@@ -1058,21 +1378,19 @@ void turbostat_init()
check_dev_msr();
check_super_user();
- num_cpus = for_all_cpus(alloc_new_counters);
- cpu_mask_init(num_cpus);
+ setup_all_buffers();
if (verbose)
- print_nehalem_info();
+ print_verbose_header();
}
int fork_it(char **argv)
{
- int retval;
pid_t child_pid;
- get_counters(cnt_even);
- /* clear affinity side-effect of get_counters() */
- sched_setaffinity(0, cpu_present_setsize, cpu_present_set);
+ for_all_cpus(get_counters, EVEN_COUNTERS);
+ /* clear affinity side-effect of get_counters() */
+ sched_setaffinity(0, cpu_present_setsize, cpu_present_set);
gettimeofday(&tv_even, (struct timezone *)NULL);
child_pid = fork();
@@ -1095,14 +1413,17 @@ int fork_it(char **argv)
exit(1);
}
}
- get_counters(cnt_odd);
+ /*
+ * n.b. fork_it() does not check for errors from for_all_cpus()
+ * because re-starting is problematic when forking
+ */
+ for_all_cpus(get_counters, ODD_COUNTERS);
gettimeofday(&tv_odd, (struct timezone *)NULL);
- retval = compute_delta(cnt_odd, cnt_even, cnt_delta);
-
timersub(&tv_odd, &tv_even, &tv_delta);
- compute_average(cnt_delta, cnt_average);
- if (!retval)
- print_counters(cnt_delta);
+ for_all_cpus_2(delta_cpu, ODD_COUNTERS, EVEN_COUNTERS);
+ compute_average(EVEN_COUNTERS);
+ format_all_counters(EVEN_COUNTERS);
+ flush_stderr();
fprintf(stderr, "%.6f sec\n", tv_delta.tv_sec + tv_delta.tv_usec/1000000.0);
@@ -1115,8 +1436,14 @@ void cmdline(int argc, char **argv)
progname = argv[0];
- while ((opt = getopt(argc, argv, "+svi:M:")) != -1) {
+ while ((opt = getopt(argc, argv, "+cpsvi:M:")) != -1) {
switch (opt) {
+ case 'c':
+ show_core_only++;
+ break;
+ case 'p':
+ show_pkg_only++;
+ break;
case 's':
summary_only++;
break;
@@ -1142,10 +1469,8 @@ int main(int argc, char **argv)
cmdline(argc, argv);
if (verbose > 1)
- fprintf(stderr, "turbostat Dec 6, 2010"
+ fprintf(stderr, "turbostat v2.0 May 16, 2012"
" - Len Brown <lenb@kernel.org>\n");
- if (verbose > 1)
- fprintf(stderr, "http://userweb.kernel.org/~lenb/acpi/utils/pmtools/turbostat/\n");
turbostat_init();
--
1.7.12.rc0
^ permalink raw reply related
* [PATCH 46/52] ACPICA: Update to version 20120711
From: Len Brown @ 2012-07-25 3:41 UTC (permalink / raw)
To: linux-acpi, linux-pm; +Cc: linux-kernel, Bob Moore, Lin Ming, Len Brown
In-Reply-To: <6af1c4fc5227af65092ebc848989693562bfa3e8.1343187617.git.len.brown@intel.com>
From: Bob Moore <robert.moore@intel.com>
Version 20120711.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
include/acpi/acpixf.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h
index 9877432..2c744c7 100644
--- a/include/acpi/acpixf.h
+++ b/include/acpi/acpixf.h
@@ -47,7 +47,7 @@
/* Current ACPICA subsystem version in YYYYMMDD format */
-#define ACPI_CA_VERSION 0x20120620
+#define ACPI_CA_VERSION 0x20120711
#include "acconfig.h"
#include "actypes.h"
--
1.7.12.rc0
^ permalink raw reply related
* [PATCH 45/52] ACPICA: AcpiSrc: Fix some translation issues for Linux conversion
From: Len Brown @ 2012-07-25 3:41 UTC (permalink / raw)
To: linux-acpi, linux-pm; +Cc: linux-kernel, Bob Moore, Lin Ming, Len Brown
In-Reply-To: <6af1c4fc5227af65092ebc848989693562bfa3e8.1343187617.git.len.brown@intel.com>
From: Bob Moore <robert.moore@intel.com>
Fixes issues like this:
i_aSL -> iASL
00-7_f -> 00-7F
local_fADT -> local_FADT
execute_oSI -> execute_OSI
Also, in function headers, the parameters are now translated to
lower case (with underscores if necessary.)
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
drivers/acpi/acpica/acevents.h | 2 +-
drivers/acpi/acpica/aclocal.h | 4 ++--
drivers/acpi/acpica/acmacros.h | 2 +-
drivers/acpi/acpica/acobject.h | 2 +-
drivers/acpi/acpica/acpredef.h | 2 +-
drivers/acpi/acpica/acstruct.h | 2 +-
drivers/acpi/acpica/amlcode.h | 4 ++--
drivers/acpi/acpica/amlresrc.h | 4 ++--
drivers/acpi/acpica/dsargs.c | 2 +-
drivers/acpi/acpica/dscontrol.c | 4 ++--
drivers/acpi/acpica/dsfield.c | 30 ++++++++++++++--------------
drivers/acpi/acpica/dsinit.c | 4 ++--
drivers/acpi/acpica/dsmethod.c | 6 +++---
drivers/acpi/acpica/dsmthdat.c | 32 +++++++++++++++---------------
drivers/acpi/acpica/dsobject.c | 14 ++++++-------
drivers/acpi/acpica/dsopcode.c | 12 +++++------
drivers/acpi/acpica/dsutils.c | 6 +++---
drivers/acpi/acpica/dswscope.c | 4 ++--
drivers/acpi/acpica/dswstate.c | 20 +++++++++----------
drivers/acpi/acpica/evevent.c | 2 +-
drivers/acpi/acpica/evglock.c | 4 ++--
drivers/acpi/acpica/evgpeblk.c | 2 +-
drivers/acpi/acpica/evgpeutil.c | 2 +-
drivers/acpi/acpica/evmisc.c | 6 +++---
drivers/acpi/acpica/evregion.c | 24 +++++++++++-----------
drivers/acpi/acpica/evrgnini.c | 28 +++++++++++++-------------
drivers/acpi/acpica/evsci.c | 4 ++--
drivers/acpi/acpica/evxface.c | 30 ++++++++++++++--------------
drivers/acpi/acpica/evxfevnt.c | 8 ++++----
drivers/acpi/acpica/evxfgpe.c | 6 +++---
drivers/acpi/acpica/evxfregn.c | 18 ++++++++---------
drivers/acpi/acpica/exconfig.c | 8 ++++----
drivers/acpi/acpica/exconvrt.c | 10 +++++-----
drivers/acpi/acpica/excreate.c | 2 +-
drivers/acpi/acpica/exdebug.c | 4 ++--
drivers/acpi/acpica/exdump.c | 22 ++++++++++-----------
drivers/acpi/acpica/exfldio.c | 14 ++++++-------
drivers/acpi/acpica/exmisc.c | 26 ++++++++++++------------
drivers/acpi/acpica/exmutex.c | 6 +++---
drivers/acpi/acpica/exprep.c | 2 +-
drivers/acpi/acpica/exregion.c | 38 +++++++++++++++++------------------
drivers/acpi/acpica/exresolv.c | 2 +-
drivers/acpi/acpica/exresop.c | 10 +++++-----
drivers/acpi/acpica/exstore.c | 2 +-
drivers/acpi/acpica/exstorob.c | 2 +-
drivers/acpi/acpica/exsystem.c | 8 ++++----
drivers/acpi/acpica/exutils.c | 8 ++++----
drivers/acpi/acpica/hwacpi.c | 2 +-
drivers/acpi/acpica/hwesleep.c | 6 +++---
drivers/acpi/acpica/hwregs.c | 22 ++++++++++-----------
drivers/acpi/acpica/hwsleep.c | 6 +++---
drivers/acpi/acpica/hwtimer.c | 4 ++--
drivers/acpi/acpica/hwvalid.c | 4 ++--
drivers/acpi/acpica/hwxface.c | 12 +++++------
drivers/acpi/acpica/hwxfsleep.c | 6 +++---
drivers/acpi/acpica/nsaccess.c | 8 ++++----
drivers/acpi/acpica/nsalloc.c | 10 +++++-----
drivers/acpi/acpica/nsdump.c | 18 ++++++++---------
drivers/acpi/acpica/nsdumpdv.c | 6 +++---
drivers/acpi/acpica/nseval.c | 10 +++++-----
drivers/acpi/acpica/nsinit.c | 6 +++---
drivers/acpi/acpica/nsload.c | 4 ++--
drivers/acpi/acpica/nsnames.c | 10 +++++-----
drivers/acpi/acpica/nsobject.c | 28 +++++++++++++-------------
drivers/acpi/acpica/nspredef.c | 38 +++++++++++++++++------------------
drivers/acpi/acpica/nsrepair.c | 14 ++++++-------
drivers/acpi/acpica/nsrepair2.c | 26 ++++++++++++------------
drivers/acpi/acpica/nssearch.c | 12 +++++------
drivers/acpi/acpica/nsutils.c | 26 ++++++++++++------------
drivers/acpi/acpica/nswalk.c | 8 ++++----
drivers/acpi/acpica/nsxfeval.c | 26 ++++++++++++------------
drivers/acpi/acpica/nsxfname.c | 16 +++++++--------
drivers/acpi/acpica/nsxfobj.c | 8 ++++----
drivers/acpi/acpica/psargs.c | 4 ++--
drivers/acpi/acpica/psloop.c | 16 +++++++--------
drivers/acpi/acpica/psopcode.c | 4 ++--
drivers/acpi/acpica/psparse.c | 6 +++---
drivers/acpi/acpica/psscope.c | 6 +++---
drivers/acpi/acpica/pstree.c | 14 ++++++-------
drivers/acpi/acpica/psutils.c | 8 ++++----
drivers/acpi/acpica/psxface.c | 16 +++++++--------
drivers/acpi/acpica/rsaddr.c | 14 ++++++-------
drivers/acpi/acpica/rscalc.c | 2 +-
drivers/acpi/acpica/rsdump.c | 10 +++++-----
drivers/acpi/acpica/rslist.c | 2 +-
drivers/acpi/acpica/rsmisc.c | 22 ++++++++++-----------
drivers/acpi/acpica/rsutils.c | 44 ++++++++++++++++++++---------------------
drivers/acpi/acpica/rsxface.c | 14 ++++++-------
drivers/acpi/acpica/tbfadt.c | 10 +++++-----
drivers/acpi/acpica/tbfind.c | 2 +-
drivers/acpi/acpica/tbinstal.c | 8 ++++----
drivers/acpi/acpica/tbutils.c | 24 +++++++++++-----------
drivers/acpi/acpica/tbxface.c | 18 ++++++++---------
drivers/acpi/acpica/tbxfroot.c | 10 +++++-----
drivers/acpi/acpica/utaddress.c | 10 +++++-----
drivers/acpi/acpica/utalloc.c | 20 +++++++++----------
drivers/acpi/acpica/utcopy.c | 2 +-
drivers/acpi/acpica/utdebug.c | 32 +++++++++++++++---------------
drivers/acpi/acpica/utdecode.c | 14 ++++++-------
drivers/acpi/acpica/utdelete.c | 14 ++++++-------
drivers/acpi/acpica/uteval.c | 6 +++---
drivers/acpi/acpica/utglobal.c | 2 +-
drivers/acpi/acpica/utids.c | 2 +-
drivers/acpi/acpica/utlock.c | 6 +++---
drivers/acpi/acpica/utmath.c | 4 ++--
drivers/acpi/acpica/utmisc.c | 38 +++++++++++++++++------------------
drivers/acpi/acpica/utmutex.c | 8 ++++----
drivers/acpi/acpica/utobject.c | 8 ++++----
drivers/acpi/acpica/utosi.c | 2 +-
drivers/acpi/acpica/utresrc.c | 34 +++++++++++++++----------------
drivers/acpi/acpica/utstate.c | 16 +++++++--------
drivers/acpi/acpica/utxface.c | 18 ++++++++---------
drivers/acpi/acpica/utxferror.c | 22 ++++++++++-----------
drivers/acpi/acpica/utxfmutex.c | 14 ++++++-------
drivers/acpi/processor_idle.c | 12 +++++------
include/acpi/acrestyp.h | 4 ++--
include/acpi/actbl.h | 8 ++++----
include/acpi/actbl1.h | 8 ++++----
include/acpi/actbl2.h | 8 ++++----
include/acpi/actypes.h | 4 ++--
120 files changed, 680 insertions(+), 680 deletions(-)
diff --git a/drivers/acpi/acpica/acevents.h b/drivers/acpi/acpica/acevents.h
index d700f63..c0a43b3 100644
--- a/drivers/acpi/acpica/acevents.h
+++ b/drivers/acpi/acpica/acevents.h
@@ -237,7 +237,7 @@ u32 acpi_ev_install_sci_handler(void);
acpi_status acpi_ev_remove_sci_handler(void);
-u32 acpi_ev_initialize_sCI(u32 program_sCI);
+u32 acpi_ev_initialize_SCI(u32 program_SCI);
ACPI_HW_DEPENDENT_RETURN_VOID(void acpi_ev_terminate(void))
#endif /* __ACEVENTS_H__ */
diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h
index 6b225e8..cc80fe1 100644
--- a/drivers/acpi/acpica/aclocal.h
+++ b/drivers/acpi/acpica/aclocal.h
@@ -299,7 +299,7 @@ acpi_status(*ACPI_INTERNAL_METHOD) (struct acpi_walk_state * walk_state);
* Information structure for ACPI predefined names.
* Each entry in the table contains the following items:
*
- * Name - The ACPI reserved name
+ * name - The ACPI reserved name
* param_count - Number of arguments to the method
* expected_return_btypes - Allowed type(s) for the return value
*/
@@ -734,7 +734,7 @@ struct acpi_parse_obj_named {
u32 name; /* 4-byte name or zero if no name */
};
-/* This version is used by the i_aSL compiler only */
+/* This version is used by the iASL compiler only */
#define ACPI_MAX_PARSEOP_NAME 20
diff --git a/drivers/acpi/acpica/acmacros.h b/drivers/acpi/acpica/acmacros.h
index 087b466..832b619 100644
--- a/drivers/acpi/acpica/acmacros.h
+++ b/drivers/acpi/acpica/acmacros.h
@@ -62,7 +62,7 @@
* printf() format helpers
*/
-/* Split 64-bit integer into two 32-bit values. Use with %8.8_x%8.8_x */
+/* Split 64-bit integer into two 32-bit values. Use with %8.8X%8.8X */
#define ACPI_FORMAT_UINT64(i) ACPI_HIDWORD(i), ACPI_LODWORD(i)
diff --git a/drivers/acpi/acpica/acobject.h b/drivers/acpi/acpica/acobject.h
index b85802d..364a130 100644
--- a/drivers/acpi/acpica/acobject.h
+++ b/drivers/acpi/acpica/acobject.h
@@ -381,7 +381,7 @@ struct acpi_object_cache_list {
/******************************************************************************
*
- * union acpi_operand_object Descriptor - a giant union of all of the above
+ * union acpi_operand_object descriptor - a giant union of all of the above
*
*****************************************************************************/
diff --git a/drivers/acpi/acpica/acpredef.h b/drivers/acpi/acpica/acpredef.h
index c8e5756..3080c01 100644
--- a/drivers/acpi/acpica/acpredef.h
+++ b/drivers/acpi/acpica/acpredef.h
@@ -140,7 +140,7 @@ enum acpi_return_package_types {
*
* The main entries in the table each contain the following items:
*
- * Name - The ACPI reserved name
+ * name - The ACPI reserved name
* param_count - Number of arguments to the method
* expected_btypes - Allowed type(s) for the return value.
* 0 means that no return value is expected.
diff --git a/drivers/acpi/acpica/acstruct.h b/drivers/acpi/acpica/acstruct.h
index 0404df6..f196e2c 100644
--- a/drivers/acpi/acpica/acstruct.h
+++ b/drivers/acpi/acpica/acstruct.h
@@ -68,7 +68,7 @@
#define ACPI_WALK_METHOD 0x01
#define ACPI_WALK_METHOD_RESTART 0x02
-/* Flags for i_aSL compiler only */
+/* Flags for iASL compiler only */
#define ACPI_WALK_CONST_REQUIRED 0x10
#define ACPI_WALK_CONST_OPTIONAL 0x20
diff --git a/drivers/acpi/acpica/amlcode.h b/drivers/acpi/acpica/amlcode.h
index 905280f..c26f8ff 100644
--- a/drivers/acpi/acpica/amlcode.h
+++ b/drivers/acpi/acpica/amlcode.h
@@ -182,7 +182,7 @@
/*
* Combination opcodes (actually two one-byte opcodes)
- * Used by the disassembler and i_aSL compiler
+ * Used by the disassembler and iASL compiler
*/
#define AML_LGREATEREQUAL_OP (u16) 0x9295
#define AML_LLESSEQUAL_OP (u16) 0x9294
@@ -280,7 +280,7 @@
/* Multiple/complex types */
-#define ARGI_DATAOBJECT 0x12 /* Buffer, String, package or reference to a Node - Used only by size_of operator */
+#define ARGI_DATAOBJECT 0x12 /* Buffer, String, package or reference to a node - Used only by size_of operator */
#define ARGI_COMPLEXOBJ 0x13 /* Buffer, String, or package (Used by INDEX op only) */
#define ARGI_REF_OR_STRING 0x14 /* Reference or String (Used by DEREFOF op only) */
#define ARGI_REGION_OR_BUFFER 0x15 /* Used by LOAD op only */
diff --git a/drivers/acpi/acpica/amlresrc.h b/drivers/acpi/acpica/amlresrc.h
index 7b2128f..af49479 100644
--- a/drivers/acpi/acpica/amlresrc.h
+++ b/drivers/acpi/acpica/amlresrc.h
@@ -98,7 +98,7 @@
#define ACPI_RESTAG_TRANSLATION "_TRA"
#define ACPI_RESTAG_TRANSTYPE "_TRS" /* Sparse(1), Dense(0) */
#define ACPI_RESTAG_TYPE "_TTP" /* Translation(1), Static (0) */
-#define ACPI_RESTAG_XFERTYPE "_SIZ" /* 8(0), 8_and16(1), 16(2) */
+#define ACPI_RESTAG_XFERTYPE "_SIZ" /* 8(0), 8And16(1), 16(2) */
#define ACPI_RESTAG_VENDORDATA "_VEN"
/* Default sizes for "small" resource descriptors */
@@ -235,7 +235,7 @@ AML_RESOURCE_LARGE_HEADER_COMMON AML_RESOURCE_ADDRESS_COMMON};
struct aml_resource_extended_address64 {
AML_RESOURCE_LARGE_HEADER_COMMON
- AML_RESOURCE_ADDRESS_COMMON u8 revision_iD;
+ AML_RESOURCE_ADDRESS_COMMON u8 revision_ID;
u8 reserved;
u64 granularity;
u64 minimum;
diff --git a/drivers/acpi/acpica/dsargs.c b/drivers/acpi/acpica/dsargs.c
index 80eb190..c8b5e25 100644
--- a/drivers/acpi/acpica/dsargs.c
+++ b/drivers/acpi/acpica/dsargs.c
@@ -62,7 +62,7 @@ acpi_ds_execute_arguments(struct acpi_namespace_node *node,
*
* FUNCTION: acpi_ds_execute_arguments
*
- * PARAMETERS: Node - Object NS node
+ * PARAMETERS: node - Object NS node
* scope_node - Parent NS node
* aml_length - Length of executable AML
* aml_start - Pointer to the AML
diff --git a/drivers/acpi/acpica/dscontrol.c b/drivers/acpi/acpica/dscontrol.c
index effe4ca..465f021 100644
--- a/drivers/acpi/acpica/dscontrol.c
+++ b/drivers/acpi/acpica/dscontrol.c
@@ -56,7 +56,7 @@ ACPI_MODULE_NAME("dscontrol")
* FUNCTION: acpi_ds_exec_begin_control_op
*
* PARAMETERS: walk_list - The list that owns the walk stack
- * Op - The control Op
+ * op - The control Op
*
* RETURN: Status
*
@@ -153,7 +153,7 @@ acpi_ds_exec_begin_control_op(struct acpi_walk_state *walk_state,
* FUNCTION: acpi_ds_exec_end_control_op
*
* PARAMETERS: walk_list - The list that owns the walk stack
- * Op - The control Op
+ * op - The control Op
*
* RETURN: Status
*
diff --git a/drivers/acpi/acpica/dsfield.c b/drivers/acpi/acpica/dsfield.c
index 8098439..3da6fd8 100644
--- a/drivers/acpi/acpica/dsfield.c
+++ b/drivers/acpi/acpica/dsfield.c
@@ -71,13 +71,13 @@ acpi_ds_get_field_names(struct acpi_create_field_info *info,
#ifdef ACPI_ASL_COMPILER
/*******************************************************************************
*
- * FUNCTION: acpi_ds_create_external_region (i_aSL Disassembler only)
+ * FUNCTION: acpi_ds_create_external_region (iASL Disassembler only)
*
* PARAMETERS: lookup_status - Status from ns_lookup operation
- * Op - Op containing the Field definition and args
- * Path - Pathname of the region
+ * op - Op containing the Field definition and args
+ * path - Pathname of the region
* ` walk_state - Current method state
- * Node - Where the new region node is returned
+ * node - Where the new region node is returned
*
* RETURN: Status
*
@@ -130,7 +130,7 @@ acpi_ds_create_external_region(acpi_status lookup_status,
*
* FUNCTION: acpi_ds_create_buffer_field
*
- * PARAMETERS: Op - Current parse op (create_xXField)
+ * PARAMETERS: op - Current parse op (create_XXField)
* walk_state - Current state
*
* RETURN: Status
@@ -167,7 +167,7 @@ acpi_ds_create_buffer_field(union acpi_parse_object *op,
arg = acpi_ps_get_arg(op, 3);
} else {
- /* For all other create_xXXField operators, name is the 3rd argument */
+ /* For all other create_XXXField operators, name is the 3rd argument */
arg = acpi_ps_get_arg(op, 2);
}
@@ -271,9 +271,9 @@ acpi_ds_create_buffer_field(union acpi_parse_object *op,
*
* FUNCTION: acpi_ds_get_field_names
*
- * PARAMETERS: Info - create_field info structure
+ * PARAMETERS: info - create_field info structure
* ` walk_state - Current method state
- * Arg - First parser arg for the field name list
+ * arg - First parser arg for the field name list
*
* RETURN: Status
*
@@ -302,10 +302,10 @@ acpi_ds_get_field_names(struct acpi_create_field_info *info,
while (arg) {
/*
* Four types of field elements are handled:
- * 1) Name - Enters a new named field into the namespace
- * 2) Offset - specifies a bit offset
+ * 1) name - Enters a new named field into the namespace
+ * 2) offset - specifies a bit offset
* 3) access_as - changes the access mode/attributes
- * 4) Connection - Associate a resource template with the field
+ * 4) connection - Associate a resource template with the field
*/
switch (arg->common.aml_opcode) {
case AML_INT_RESERVEDFIELD_OP:
@@ -457,7 +457,7 @@ acpi_ds_get_field_names(struct acpi_create_field_info *info,
*
* FUNCTION: acpi_ds_create_field
*
- * PARAMETERS: Op - Op containing the Field definition and args
+ * PARAMETERS: op - Op containing the Field definition and args
* region_node - Object for the containing Operation Region
* ` walk_state - Current method state
*
@@ -521,7 +521,7 @@ acpi_ds_create_field(union acpi_parse_object *op,
*
* FUNCTION: acpi_ds_init_field_objects
*
- * PARAMETERS: Op - Op containing the Field definition and args
+ * PARAMETERS: op - Op containing the Field definition and args
* ` walk_state - Current method state
*
* RETURN: Status
@@ -636,7 +636,7 @@ acpi_ds_init_field_objects(union acpi_parse_object *op,
*
* FUNCTION: acpi_ds_create_bank_field
*
- * PARAMETERS: Op - Op containing the Field definition and args
+ * PARAMETERS: op - Op containing the Field definition and args
* region_node - Object for the containing Operation Region
* walk_state - Current method state
*
@@ -726,7 +726,7 @@ acpi_ds_create_bank_field(union acpi_parse_object *op,
*
* FUNCTION: acpi_ds_create_index_field
*
- * PARAMETERS: Op - Op containing the Field definition and args
+ * PARAMETERS: op - Op containing the Field definition and args
* region_node - Object for the containing Operation Region
* ` walk_state - Current method state
*
diff --git a/drivers/acpi/acpica/dsinit.c b/drivers/acpi/acpica/dsinit.c
index 9e5ac7f..87eff70 100644
--- a/drivers/acpi/acpica/dsinit.c
+++ b/drivers/acpi/acpica/dsinit.c
@@ -60,8 +60,8 @@ acpi_ds_init_one_object(acpi_handle obj_handle,
* FUNCTION: acpi_ds_init_one_object
*
* PARAMETERS: obj_handle - Node for the object
- * Level - Current nesting level
- * Context - Points to a init info struct
+ * level - Current nesting level
+ * context - Points to a init info struct
* return_value - Not used
*
* RETURN: Status
diff --git a/drivers/acpi/acpica/dsmethod.c b/drivers/acpi/acpica/dsmethod.c
index 00f5dab..aa9a5d4 100644
--- a/drivers/acpi/acpica/dsmethod.c
+++ b/drivers/acpi/acpica/dsmethod.c
@@ -61,7 +61,7 @@ acpi_ds_create_method_mutex(union acpi_operand_object *method_desc);
*
* FUNCTION: acpi_ds_method_error
*
- * PARAMETERS: Status - Execution status
+ * PARAMETERS: status - Execution status
* walk_state - Current state
*
* RETURN: Status
@@ -306,9 +306,9 @@ acpi_ds_begin_method_execution(struct acpi_namespace_node *method_node,
*
* FUNCTION: acpi_ds_call_control_method
*
- * PARAMETERS: Thread - Info for this thread
+ * PARAMETERS: thread - Info for this thread
* this_walk_state - Current walk state
- * Op - Current Op to be walked
+ * op - Current Op to be walked
*
* RETURN: Status
*
diff --git a/drivers/acpi/acpica/dsmthdat.c b/drivers/acpi/acpica/dsmthdat.c
index b40bd50..8d55ceb 100644
--- a/drivers/acpi/acpica/dsmthdat.c
+++ b/drivers/acpi/acpica/dsmthdat.c
@@ -177,7 +177,7 @@ void acpi_ds_method_data_delete_all(struct acpi_walk_state *walk_state)
*
* FUNCTION: acpi_ds_method_data_init_args
*
- * PARAMETERS: *Params - Pointer to a parameter list for the method
+ * PARAMETERS: *params - Pointer to a parameter list for the method
* max_param_count - The arg count for this method
* walk_state - Current walk state object
*
@@ -232,11 +232,11 @@ acpi_ds_method_data_init_args(union acpi_operand_object **params,
*
* FUNCTION: acpi_ds_method_data_get_node
*
- * PARAMETERS: Type - Either ACPI_REFCLASS_LOCAL or
+ * PARAMETERS: type - Either ACPI_REFCLASS_LOCAL or
* ACPI_REFCLASS_ARG
- * Index - Which Local or Arg whose type to get
+ * index - Which Local or Arg whose type to get
* walk_state - Current walk state object
- * Node - Where the node is returned.
+ * node - Where the node is returned.
*
* RETURN: Status and node
*
@@ -296,10 +296,10 @@ acpi_ds_method_data_get_node(u8 type,
*
* FUNCTION: acpi_ds_method_data_set_value
*
- * PARAMETERS: Type - Either ACPI_REFCLASS_LOCAL or
+ * PARAMETERS: type - Either ACPI_REFCLASS_LOCAL or
* ACPI_REFCLASS_ARG
- * Index - Which Local or Arg to get
- * Object - Object to be inserted into the stack entry
+ * index - Which Local or Arg to get
+ * object - Object to be inserted into the stack entry
* walk_state - Current walk state object
*
* RETURN: Status
@@ -336,7 +336,7 @@ acpi_ds_method_data_set_value(u8 type,
* Increment ref count so object can't be deleted while installed.
* NOTE: We do not copy the object in order to preserve the call by
* reference semantics of ACPI Control Method invocation.
- * (See ACPI Specification 2.0_c)
+ * (See ACPI Specification 2.0C)
*/
acpi_ut_add_reference(object);
@@ -350,9 +350,9 @@ acpi_ds_method_data_set_value(u8 type,
*
* FUNCTION: acpi_ds_method_data_get_value
*
- * PARAMETERS: Type - Either ACPI_REFCLASS_LOCAL or
+ * PARAMETERS: type - Either ACPI_REFCLASS_LOCAL or
* ACPI_REFCLASS_ARG
- * Index - Which local_var or argument to get
+ * index - Which localVar or argument to get
* walk_state - Current walk state object
* dest_desc - Where Arg or Local value is returned
*
@@ -458,9 +458,9 @@ acpi_ds_method_data_get_value(u8 type,
*
* FUNCTION: acpi_ds_method_data_delete_value
*
- * PARAMETERS: Type - Either ACPI_REFCLASS_LOCAL or
+ * PARAMETERS: type - Either ACPI_REFCLASS_LOCAL or
* ACPI_REFCLASS_ARG
- * Index - Which local_var or argument to delete
+ * index - Which localVar or argument to delete
* walk_state - Current walk state object
*
* RETURN: None
@@ -515,9 +515,9 @@ acpi_ds_method_data_delete_value(u8 type,
*
* FUNCTION: acpi_ds_store_object_to_local
*
- * PARAMETERS: Type - Either ACPI_REFCLASS_LOCAL or
+ * PARAMETERS: type - Either ACPI_REFCLASS_LOCAL or
* ACPI_REFCLASS_ARG
- * Index - Which Local or Arg to set
+ * index - Which Local or Arg to set
* obj_desc - Value to be stored
* walk_state - Current walk state
*
@@ -670,8 +670,8 @@ acpi_ds_store_object_to_local(u8 type,
*
* FUNCTION: acpi_ds_method_data_get_type
*
- * PARAMETERS: Opcode - Either AML_LOCAL_OP or AML_ARG_OP
- * Index - Which Local or Arg whose type to get
+ * PARAMETERS: opcode - Either AML_LOCAL_OP or AML_ARG_OP
+ * index - Which Local or Arg whose type to get
* walk_state - Current walk state object
*
* RETURN: Data type of current value of the selected Arg or Local
diff --git a/drivers/acpi/acpica/dsobject.c b/drivers/acpi/acpica/dsobject.c
index d7045ca..68592dd 100644
--- a/drivers/acpi/acpica/dsobject.c
+++ b/drivers/acpi/acpica/dsobject.c
@@ -64,7 +64,7 @@ acpi_ds_build_internal_object(struct acpi_walk_state *walk_state,
* FUNCTION: acpi_ds_build_internal_object
*
* PARAMETERS: walk_state - Current walk state
- * Op - Parser object to be translated
+ * op - Parser object to be translated
* obj_desc_ptr - Where the ACPI internal object is returned
*
* RETURN: Status
@@ -250,7 +250,7 @@ acpi_ds_build_internal_object(struct acpi_walk_state *walk_state,
* FUNCTION: acpi_ds_build_internal_buffer_obj
*
* PARAMETERS: walk_state - Current walk state
- * Op - Parser object to be translated
+ * op - Parser object to be translated
* buffer_length - Length of the buffer
* obj_desc_ptr - Where the ACPI internal object is returned
*
@@ -354,7 +354,7 @@ acpi_ds_build_internal_buffer_obj(struct acpi_walk_state *walk_state,
* FUNCTION: acpi_ds_build_internal_package_obj
*
* PARAMETERS: walk_state - Current walk state
- * Op - Parser object to be translated
+ * op - Parser object to be translated
* element_count - Number of elements in the package - this is
* the num_elements argument to Package()
* obj_desc_ptr - Where the ACPI internal object is returned
@@ -547,8 +547,8 @@ acpi_ds_build_internal_package_obj(struct acpi_walk_state *walk_state,
* FUNCTION: acpi_ds_create_node
*
* PARAMETERS: walk_state - Current walk state
- * Node - NS Node to be initialized
- * Op - Parser object to be translated
+ * node - NS Node to be initialized
+ * op - Parser object to be translated
*
* RETURN: Status
*
@@ -611,8 +611,8 @@ acpi_ds_create_node(struct acpi_walk_state *walk_state,
* FUNCTION: acpi_ds_init_object_from_op
*
* PARAMETERS: walk_state - Current walk state
- * Op - Parser op used to init the internal object
- * Opcode - AML opcode associated with the object
+ * op - Parser op used to init the internal object
+ * opcode - AML opcode associated with the object
* ret_obj_desc - Namespace object to be initialized
*
* RETURN: Status
diff --git a/drivers/acpi/acpica/dsopcode.c b/drivers/acpi/acpica/dsopcode.c
index e5eff75..aa34d89 100644
--- a/drivers/acpi/acpica/dsopcode.c
+++ b/drivers/acpi/acpica/dsopcode.c
@@ -286,7 +286,7 @@ acpi_ds_init_buffer_field(u16 aml_opcode,
* FUNCTION: acpi_ds_eval_buffer_field_operands
*
* PARAMETERS: walk_state - Current walk
- * Op - A valid buffer_field Op object
+ * op - A valid buffer_field Op object
*
* RETURN: Status
*
@@ -370,7 +370,7 @@ acpi_ds_eval_buffer_field_operands(struct acpi_walk_state *walk_state,
* FUNCTION: acpi_ds_eval_region_operands
*
* PARAMETERS: walk_state - Current walk
- * Op - A valid region Op object
+ * op - A valid region Op object
*
* RETURN: Status
*
@@ -397,7 +397,7 @@ acpi_ds_eval_region_operands(struct acpi_walk_state *walk_state,
*/
node = op->common.node;
- /* next_op points to the op that holds the space_iD */
+ /* next_op points to the op that holds the space_ID */
next_op = op->common.value.arg;
@@ -461,7 +461,7 @@ acpi_ds_eval_region_operands(struct acpi_walk_state *walk_state,
* FUNCTION: acpi_ds_eval_table_region_operands
*
* PARAMETERS: walk_state - Current walk
- * Op - A valid region Op object
+ * op - A valid region Op object
*
* RETURN: Status
*
@@ -560,7 +560,7 @@ acpi_ds_eval_table_region_operands(struct acpi_walk_state *walk_state,
* FUNCTION: acpi_ds_eval_data_object_operands
*
* PARAMETERS: walk_state - Current walk
- * Op - A valid data_object Op object
+ * op - A valid data_object Op object
* obj_desc - data_object
*
* RETURN: Status
@@ -662,7 +662,7 @@ acpi_ds_eval_data_object_operands(struct acpi_walk_state *walk_state,
* FUNCTION: acpi_ds_eval_bank_field_operands
*
* PARAMETERS: walk_state - Current walk
- * Op - A valid bank_field Op object
+ * op - A valid bank_field Op object
*
* RETURN: Status
*
diff --git a/drivers/acpi/acpica/dsutils.c b/drivers/acpi/acpica/dsutils.c
index 1abcda3..73a5447 100644
--- a/drivers/acpi/acpica/dsutils.c
+++ b/drivers/acpi/acpica/dsutils.c
@@ -157,7 +157,7 @@ acpi_ds_do_implicit_return(union acpi_operand_object *return_desc,
*
* FUNCTION: acpi_ds_is_result_used
*
- * PARAMETERS: Op - Current Op
+ * PARAMETERS: op - Current Op
* walk_state - Current State
*
* RETURN: TRUE if result is used, FALSE otherwise
@@ -323,7 +323,7 @@ acpi_ds_is_result_used(union acpi_parse_object * op,
*
* FUNCTION: acpi_ds_delete_result_if_not_used
*
- * PARAMETERS: Op - Current parse Op
+ * PARAMETERS: op - Current parse Op
* result_obj - Result of the operation
* walk_state - Current state
*
@@ -445,7 +445,7 @@ void acpi_ds_clear_operands(struct acpi_walk_state *walk_state)
* FUNCTION: acpi_ds_create_operand
*
* PARAMETERS: walk_state - Current walk state
- * Arg - Parse object for the argument
+ * arg - Parse object for the argument
* arg_index - Which argument (zero based)
*
* RETURN: Status
diff --git a/drivers/acpi/acpica/dswscope.c b/drivers/acpi/acpica/dswscope.c
index 9e9490a..f6c4295 100644
--- a/drivers/acpi/acpica/dswscope.c
+++ b/drivers/acpi/acpica/dswscope.c
@@ -85,8 +85,8 @@ void acpi_ds_scope_stack_clear(struct acpi_walk_state *walk_state)
*
* FUNCTION: acpi_ds_scope_stack_push
*
- * PARAMETERS: Node - Name to be made current
- * Type - Type of frame being pushed
+ * PARAMETERS: node - Name to be made current
+ * type - Type of frame being pushed
* walk_state - Current state
*
* RETURN: Status
diff --git a/drivers/acpi/acpica/dswstate.c b/drivers/acpi/acpica/dswstate.c
index c9c2ac1..d0e6555 100644
--- a/drivers/acpi/acpica/dswstate.c
+++ b/drivers/acpi/acpica/dswstate.c
@@ -58,7 +58,7 @@ static acpi_status acpi_ds_result_stack_pop(struct acpi_walk_state *ws);
*
* FUNCTION: acpi_ds_result_pop
*
- * PARAMETERS: Object - Where to return the popped object
+ * PARAMETERS: object - Where to return the popped object
* walk_state - Current Walk state
*
* RETURN: Status
@@ -132,7 +132,7 @@ acpi_ds_result_pop(union acpi_operand_object **object,
*
* FUNCTION: acpi_ds_result_push
*
- * PARAMETERS: Object - Where to return the popped object
+ * PARAMETERS: object - Where to return the popped object
* walk_state - Current Walk state
*
* RETURN: Status
@@ -296,7 +296,7 @@ static acpi_status acpi_ds_result_stack_pop(struct acpi_walk_state *walk_state)
*
* FUNCTION: acpi_ds_obj_stack_push
*
- * PARAMETERS: Object - Object to push
+ * PARAMETERS: object - Object to push
* walk_state - Current Walk state
*
* RETURN: Status
@@ -433,7 +433,7 @@ acpi_ds_obj_stack_pop_and_delete(u32 pop_count,
*
* FUNCTION: acpi_ds_get_current_walk_state
*
- * PARAMETERS: Thread - Get current active state for this Thread
+ * PARAMETERS: thread - Get current active state for this Thread
*
* RETURN: Pointer to the current walk state
*
@@ -462,7 +462,7 @@ struct acpi_walk_state *acpi_ds_get_current_walk_state(struct acpi_thread_state
* FUNCTION: acpi_ds_push_walk_state
*
* PARAMETERS: walk_state - State to push
- * Thread - Thread state object
+ * thread - Thread state object
*
* RETURN: None
*
@@ -486,7 +486,7 @@ acpi_ds_push_walk_state(struct acpi_walk_state *walk_state,
*
* FUNCTION: acpi_ds_pop_walk_state
*
- * PARAMETERS: Thread - Current thread state
+ * PARAMETERS: thread - Current thread state
*
* RETURN: A walk_state object popped from the thread's stack
*
@@ -525,9 +525,9 @@ struct acpi_walk_state *acpi_ds_pop_walk_state(struct acpi_thread_state *thread)
* FUNCTION: acpi_ds_create_walk_state
*
* PARAMETERS: owner_id - ID for object creation
- * Origin - Starting point for this walk
+ * origin - Starting point for this walk
* method_desc - Method object
- * Thread - Current thread state
+ * thread - Current thread state
*
* RETURN: Pointer to the new walk state.
*
@@ -578,11 +578,11 @@ struct acpi_walk_state *acpi_ds_create_walk_state(acpi_owner_id owner_id, union
* FUNCTION: acpi_ds_init_aml_walk
*
* PARAMETERS: walk_state - New state to be initialized
- * Op - Current parse op
+ * op - Current parse op
* method_node - Control method NS node, if any
* aml_start - Start of AML
* aml_length - Length of AML
- * Info - Method info block (params, etc.)
+ * info - Method info block (params, etc.)
* pass_number - 1, 2, or 3
*
* RETURN: Status
diff --git a/drivers/acpi/acpica/evevent.c b/drivers/acpi/acpica/evevent.c
index 07e4dc4..d4acfbb 100644
--- a/drivers/acpi/acpica/evevent.c
+++ b/drivers/acpi/acpica/evevent.c
@@ -251,7 +251,7 @@ u32 acpi_ev_fixed_event_detect(void)
*
* FUNCTION: acpi_ev_fixed_event_dispatch
*
- * PARAMETERS: Event - Event type
+ * PARAMETERS: event - Event type
*
* RETURN: INTERRUPT_HANDLED or INTERRUPT_NOT_HANDLED
*
diff --git a/drivers/acpi/acpica/evglock.c b/drivers/acpi/acpica/evglock.c
index cfeab38..af14a71 100644
--- a/drivers/acpi/acpica/evglock.c
+++ b/drivers/acpi/acpica/evglock.c
@@ -135,7 +135,7 @@ acpi_status acpi_ev_remove_global_lock_handler(void)
*
* FUNCTION: acpi_ev_global_lock_handler
*
- * PARAMETERS: Context - From thread interface, not used
+ * PARAMETERS: context - From thread interface, not used
*
* RETURN: ACPI_INTERRUPT_HANDLED
*
@@ -182,7 +182,7 @@ static u32 acpi_ev_global_lock_handler(void *context)
*
* FUNCTION: acpi_ev_acquire_global_lock
*
- * PARAMETERS: Timeout - Max time to wait for the lock, in millisec.
+ * PARAMETERS: timeout - Max time to wait for the lock, in millisec.
*
* RETURN: Status
*
diff --git a/drivers/acpi/acpica/evgpeblk.c b/drivers/acpi/acpica/evgpeblk.c
index 23a3ca8..8cf4c10 100644
--- a/drivers/acpi/acpica/evgpeblk.c
+++ b/drivers/acpi/acpica/evgpeblk.c
@@ -318,7 +318,7 @@ acpi_ev_create_gpe_info_blocks(struct acpi_gpe_block_info *gpe_block)
* FUNCTION: acpi_ev_create_gpe_block
*
* PARAMETERS: gpe_device - Handle to the parent GPE block
- * gpe_block_address - Address and space_iD
+ * gpe_block_address - Address and space_ID
* register_count - Number of GPE register pairs in the block
* gpe_block_base_number - Starting GPE number for the block
* interrupt_number - H/W interrupt for the block
diff --git a/drivers/acpi/acpica/evgpeutil.c b/drivers/acpi/acpica/evgpeutil.c
index 0c33c62..cb50dd9 100644
--- a/drivers/acpi/acpica/evgpeutil.c
+++ b/drivers/acpi/acpica/evgpeutil.c
@@ -54,7 +54,7 @@ ACPI_MODULE_NAME("evgpeutil")
* FUNCTION: acpi_ev_walk_gpe_list
*
* PARAMETERS: gpe_walk_callback - Routine called for each GPE block
- * Context - Value passed to callback
+ * context - Value passed to callback
*
* RETURN: Status
*
diff --git a/drivers/acpi/acpica/evmisc.c b/drivers/acpi/acpica/evmisc.c
index 381fce9..51f5379 100644
--- a/drivers/acpi/acpica/evmisc.c
+++ b/drivers/acpi/acpica/evmisc.c
@@ -56,7 +56,7 @@ static void ACPI_SYSTEM_XFACE acpi_ev_notify_dispatch(void *context);
*
* FUNCTION: acpi_ev_is_notify_object
*
- * PARAMETERS: Node - Node to check
+ * PARAMETERS: node - Node to check
*
* RETURN: TRUE if notifies allowed on this object
*
@@ -86,7 +86,7 @@ u8 acpi_ev_is_notify_object(struct acpi_namespace_node *node)
*
* FUNCTION: acpi_ev_queue_notify_request
*
- * PARAMETERS: Node - NS node for the notified object
+ * PARAMETERS: node - NS node for the notified object
* notify_value - Value from the Notify() request
*
* RETURN: Status
@@ -181,7 +181,7 @@ acpi_ev_queue_notify_request(struct acpi_namespace_node * node,
*
* FUNCTION: acpi_ev_notify_dispatch
*
- * PARAMETERS: Context - To be passed to the notify handler
+ * PARAMETERS: context - To be passed to the notify handler
*
* RETURN: None.
*
diff --git a/drivers/acpi/acpica/evregion.c b/drivers/acpi/acpica/evregion.c
index 1b0180a..0cc6a16 100644
--- a/drivers/acpi/acpica/evregion.c
+++ b/drivers/acpi/acpica/evregion.c
@@ -150,7 +150,7 @@ acpi_status acpi_ev_install_region_handlers(void)
*
* FUNCTION: acpi_ev_has_default_handler
*
- * PARAMETERS: Node - Namespace node for the device
+ * PARAMETERS: node - Namespace node for the device
* space_id - The address space ID
*
* RETURN: TRUE if default handler is installed, FALSE otherwise
@@ -244,7 +244,7 @@ acpi_status acpi_ev_initialize_op_regions(void)
* FUNCTION: acpi_ev_execute_reg_method
*
* PARAMETERS: region_obj - Region object
- * Function - Passed to _REG: On (1) or Off (0)
+ * function - Passed to _REG: On (1) or Off (0)
*
* RETURN: Status
*
@@ -286,10 +286,10 @@ acpi_ev_execute_reg_method(union acpi_operand_object *region_obj, u32 function)
/*
* The _REG method has two arguments:
*
- * Arg0 - Integer:
+ * arg0 - Integer:
* Operation region space ID Same value as region_obj->Region.space_id
*
- * Arg1 - Integer:
+ * arg1 - Integer:
* connection status 1 for connecting the handler, 0 for disconnecting
* the handler (Passed as a parameter)
*/
@@ -330,10 +330,10 @@ acpi_ev_execute_reg_method(union acpi_operand_object *region_obj, u32 function)
*
* PARAMETERS: region_obj - Internal region object
* field_obj - Corresponding field. Can be NULL.
- * Function - Read or Write operation
+ * function - Read or Write operation
* region_offset - Where in the region to read or write
* bit_width - Field width in bits (8, 16, 32, or 64)
- * Value - Pointer to in or out value, must be
+ * value - Pointer to in or out value, must be
* a full 64-bit integer
*
* RETURN: Status
@@ -840,11 +840,11 @@ acpi_ev_install_handler(acpi_handle obj_handle,
*
* FUNCTION: acpi_ev_install_space_handler
*
- * PARAMETERS: Node - Namespace node for the device
+ * PARAMETERS: node - Namespace node for the device
* space_id - The address space ID
- * Handler - Address of the handler
- * Setup - Address of the setup function
- * Context - Value passed to the handler on each access
+ * handler - Address of the handler
+ * setup - Address of the setup function
+ * context - Value passed to the handler on each access
*
* RETURN: Status
*
@@ -1061,7 +1061,7 @@ acpi_ev_install_space_handler(struct acpi_namespace_node * node,
*
* FUNCTION: acpi_ev_execute_reg_methods
*
- * PARAMETERS: Node - Namespace node for the device
+ * PARAMETERS: node - Namespace node for the device
* space_id - The address space ID
*
* RETURN: Status
@@ -1104,7 +1104,7 @@ acpi_ev_execute_reg_methods(struct acpi_namespace_node *node,
*
* PARAMETERS: walk_namespace callback
*
- * DESCRIPTION: Run _REG method for region objects of the requested space_iD
+ * DESCRIPTION: Run _REG method for region objects of the requested spaceID
*
******************************************************************************/
diff --git a/drivers/acpi/acpica/evrgnini.c b/drivers/acpi/acpica/evrgnini.c
index 819c17f..4c1c826 100644
--- a/drivers/acpi/acpica/evrgnini.c
+++ b/drivers/acpi/acpica/evrgnini.c
@@ -56,8 +56,8 @@ static u8 acpi_ev_is_pci_root_bridge(struct acpi_namespace_node *node);
*
* FUNCTION: acpi_ev_system_memory_region_setup
*
- * PARAMETERS: Handle - Region we are interested in
- * Function - Start or stop
+ * PARAMETERS: handle - Region we are interested in
+ * function - Start or stop
* handler_context - Address space handler context
* region_context - Region specific context
*
@@ -118,8 +118,8 @@ acpi_ev_system_memory_region_setup(acpi_handle handle,
*
* FUNCTION: acpi_ev_io_space_region_setup
*
- * PARAMETERS: Handle - Region we are interested in
- * Function - Start or stop
+ * PARAMETERS: handle - Region we are interested in
+ * function - Start or stop
* handler_context - Address space handler context
* region_context - Region specific context
*
@@ -149,8 +149,8 @@ acpi_ev_io_space_region_setup(acpi_handle handle,
*
* FUNCTION: acpi_ev_pci_config_region_setup
*
- * PARAMETERS: Handle - Region we are interested in
- * Function - Start or stop
+ * PARAMETERS: handle - Region we are interested in
+ * function - Start or stop
* handler_context - Address space handler context
* region_context - Region specific context
*
@@ -338,7 +338,7 @@ acpi_ev_pci_config_region_setup(acpi_handle handle,
*
* FUNCTION: acpi_ev_is_pci_root_bridge
*
- * PARAMETERS: Node - Device node being examined
+ * PARAMETERS: node - Device node being examined
*
* RETURN: TRUE if device is a PCI/PCI-Express Root Bridge
*
@@ -393,14 +393,14 @@ static u8 acpi_ev_is_pci_root_bridge(struct acpi_namespace_node *node)
*
* FUNCTION: acpi_ev_pci_bar_region_setup
*
- * PARAMETERS: Handle - Region we are interested in
- * Function - Start or stop
+ * PARAMETERS: handle - Region we are interested in
+ * function - Start or stop
* handler_context - Address space handler context
* region_context - Region specific context
*
* RETURN: Status
*
- * DESCRIPTION: Setup a pci_bAR operation region
+ * DESCRIPTION: Setup a pci_BAR operation region
*
* MUTEX: Assumes namespace is not locked
*
@@ -420,8 +420,8 @@ acpi_ev_pci_bar_region_setup(acpi_handle handle,
*
* FUNCTION: acpi_ev_cmos_region_setup
*
- * PARAMETERS: Handle - Region we are interested in
- * Function - Start or stop
+ * PARAMETERS: handle - Region we are interested in
+ * function - Start or stop
* handler_context - Address space handler context
* region_context - Region specific context
*
@@ -447,8 +447,8 @@ acpi_ev_cmos_region_setup(acpi_handle handle,
*
* FUNCTION: acpi_ev_default_region_setup
*
- * PARAMETERS: Handle - Region we are interested in
- * Function - Start or stop
+ * PARAMETERS: handle - Region we are interested in
+ * function - Start or stop
* handler_context - Address space handler context
* region_context - Region specific context
*
diff --git a/drivers/acpi/acpica/evsci.c b/drivers/acpi/acpica/evsci.c
index 6a57aa2..f9661e2 100644
--- a/drivers/acpi/acpica/evsci.c
+++ b/drivers/acpi/acpica/evsci.c
@@ -56,7 +56,7 @@ static u32 ACPI_SYSTEM_XFACE acpi_ev_sci_xrupt_handler(void *context);
*
* FUNCTION: acpi_ev_sci_xrupt_handler
*
- * PARAMETERS: Context - Calling Context
+ * PARAMETERS: context - Calling Context
*
* RETURN: Status code indicates whether interrupt was handled.
*
@@ -96,7 +96,7 @@ static u32 ACPI_SYSTEM_XFACE acpi_ev_sci_xrupt_handler(void *context)
*
* FUNCTION: acpi_ev_gpe_xrupt_handler
*
- * PARAMETERS: Context - Calling Context
+ * PARAMETERS: context - Calling Context
*
* RETURN: Status code indicates whether interrupt was handled.
*
diff --git a/drivers/acpi/acpica/evxface.c b/drivers/acpi/acpica/evxface.c
index 6a8b537..7587eb6 100644
--- a/drivers/acpi/acpica/evxface.c
+++ b/drivers/acpi/acpica/evxface.c
@@ -342,7 +342,7 @@ ACPI_EXPORT_SYMBOL(acpi_remove_notify_handler)
*
* FUNCTION: acpi_install_exception_handler
*
- * PARAMETERS: Handler - Pointer to the handler function for the
+ * PARAMETERS: handler - Pointer to the handler function for the
* event
*
* RETURN: Status
@@ -386,8 +386,8 @@ ACPI_EXPORT_SYMBOL(acpi_install_exception_handler)
*
* FUNCTION: acpi_install_global_event_handler
*
- * PARAMETERS: Handler - Pointer to the global event handler function
- * Context - Value passed to the handler on each event
+ * PARAMETERS: handler - Pointer to the global event handler function
+ * context - Value passed to the handler on each event
*
* RETURN: Status
*
@@ -436,10 +436,10 @@ ACPI_EXPORT_SYMBOL(acpi_install_global_event_handler)
*
* FUNCTION: acpi_install_fixed_event_handler
*
- * PARAMETERS: Event - Event type to enable.
- * Handler - Pointer to the handler function for the
+ * PARAMETERS: event - Event type to enable.
+ * handler - Pointer to the handler function for the
* event
- * Context - Value passed to the handler on each GPE
+ * context - Value passed to the handler on each GPE
*
* RETURN: Status
*
@@ -506,8 +506,8 @@ ACPI_EXPORT_SYMBOL(acpi_install_fixed_event_handler)
*
* FUNCTION: acpi_remove_fixed_event_handler
*
- * PARAMETERS: Event - Event type to disable.
- * Handler - Address of the handler
+ * PARAMETERS: event - Event type to disable.
+ * handler - Address of the handler
*
* RETURN: Status
*
@@ -563,10 +563,10 @@ ACPI_EXPORT_SYMBOL(acpi_remove_fixed_event_handler)
* PARAMETERS: gpe_device - Namespace node for the GPE (NULL for FADT
* defined GPEs)
* gpe_number - The GPE number within the GPE block
- * Type - Whether this GPE should be treated as an
+ * type - Whether this GPE should be treated as an
* edge- or level-triggered interrupt.
- * Address - Address of the handler
- * Context - Value passed to the handler on each GPE
+ * address - Address of the handler
+ * context - Value passed to the handler on each GPE
*
* RETURN: Status
*
@@ -673,7 +673,7 @@ ACPI_EXPORT_SYMBOL(acpi_install_gpe_handler)
* PARAMETERS: gpe_device - Namespace node for the GPE (NULL for FADT
* defined GPEs)
* gpe_number - The event to remove a handler
- * Address - Address of the handler
+ * address - Address of the handler
*
* RETURN: Status
*
@@ -769,8 +769,8 @@ ACPI_EXPORT_SYMBOL(acpi_remove_gpe_handler)
*
* FUNCTION: acpi_acquire_global_lock
*
- * PARAMETERS: Timeout - How long the caller is willing to wait
- * Handle - Where the handle to the lock is returned
+ * PARAMETERS: timeout - How long the caller is willing to wait
+ * handle - Where the handle to the lock is returned
* (if acquired)
*
* RETURN: Status
@@ -817,7 +817,7 @@ ACPI_EXPORT_SYMBOL(acpi_acquire_global_lock)
*
* FUNCTION: acpi_release_global_lock
*
- * PARAMETERS: Handle - Returned from acpi_acquire_global_lock
+ * PARAMETERS: handle - Returned from acpi_acquire_global_lock
*
* RETURN: Status
*
diff --git a/drivers/acpi/acpica/evxfevnt.c b/drivers/acpi/acpica/evxfevnt.c
index 77cee5a..35520c6 100644
--- a/drivers/acpi/acpica/evxfevnt.c
+++ b/drivers/acpi/acpica/evxfevnt.c
@@ -153,8 +153,8 @@ ACPI_EXPORT_SYMBOL(acpi_disable)
*
* FUNCTION: acpi_enable_event
*
- * PARAMETERS: Event - The fixed eventto be enabled
- * Flags - Reserved
+ * PARAMETERS: event - The fixed eventto be enabled
+ * flags - Reserved
*
* RETURN: Status
*
@@ -265,7 +265,7 @@ ACPI_EXPORT_SYMBOL(acpi_disable_event)
*
* FUNCTION: acpi_clear_event
*
- * PARAMETERS: Event - The fixed event to be cleared
+ * PARAMETERS: event - The fixed event to be cleared
*
* RETURN: Status
*
@@ -301,7 +301,7 @@ ACPI_EXPORT_SYMBOL(acpi_clear_event)
*
* FUNCTION: acpi_get_event_status
*
- * PARAMETERS: Event - The fixed event
+ * PARAMETERS: event - The fixed event
* event_status - Where the current status of the event will
* be returned
*
diff --git a/drivers/acpi/acpica/evxfgpe.c b/drivers/acpi/acpica/evxfgpe.c
index 2ce4409..6affbdb 100644
--- a/drivers/acpi/acpica/evxfgpe.c
+++ b/drivers/acpi/acpica/evxfgpe.c
@@ -315,7 +315,7 @@ ACPI_EXPORT_SYMBOL(acpi_setup_gpe_for_wake)
*
* PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1
* gpe_number - GPE level within the GPE block
- * Action - Enable or Disable
+ * action - Enable or Disable
*
* RETURN: Status
*
@@ -540,7 +540,7 @@ ACPI_EXPORT_SYMBOL(acpi_enable_all_runtime_gpes)
* FUNCTION: acpi_install_gpe_block
*
* PARAMETERS: gpe_device - Handle to the parent GPE Block Device
- * gpe_block_address - Address and space_iD
+ * gpe_block_address - Address and space_ID
* register_count - Number of GPE register pairs in the block
* interrupt_number - H/W interrupt for the block
*
@@ -685,7 +685,7 @@ ACPI_EXPORT_SYMBOL(acpi_remove_gpe_block)
*
* FUNCTION: acpi_get_gpe_device
*
- * PARAMETERS: Index - System GPE index (0-current_gpe_count)
+ * PARAMETERS: index - System GPE index (0-current_gpe_count)
* gpe_device - Where the parent GPE Device is returned
*
* RETURN: Status
diff --git a/drivers/acpi/acpica/evxfregn.c b/drivers/acpi/acpica/evxfregn.c
index 6019208c..96b412d 100644
--- a/drivers/acpi/acpica/evxfregn.c
+++ b/drivers/acpi/acpica/evxfregn.c
@@ -55,11 +55,11 @@ ACPI_MODULE_NAME("evxfregn")
*
* FUNCTION: acpi_install_address_space_handler
*
- * PARAMETERS: Device - Handle for the device
+ * PARAMETERS: device - Handle for the device
* space_id - The address space ID
- * Handler - Address of the handler
- * Setup - Address of the setup function
- * Context - Value passed to the handler on each access
+ * handler - Address of the handler
+ * setup - Address of the setup function
+ * context - Value passed to the handler on each access
*
* RETURN: Status
*
@@ -112,16 +112,16 @@ acpi_install_address_space_handler(acpi_handle device,
}
/*
- * For the default space_iDs, (the IDs for which there are default region handlers
+ * For the default space_IDs, (the IDs for which there are default region handlers
* installed) Only execute the _REG methods if the global initialization _REG
* methods have already been run (via acpi_initialize_objects). In other words,
- * we will defer the execution of the _REG methods for these space_iDs until
+ * we will defer the execution of the _REG methods for these space_IDs until
* execution of acpi_initialize_objects. This is done because we need the handlers
* for the default spaces (mem/io/pci/table) to be installed before we can run
* any control methods (or _REG methods). There is known BIOS code that depends
* on this.
*
- * For all other space_iDs, we can safely execute the _REG methods immediately.
+ * For all other space_IDs, we can safely execute the _REG methods immediately.
* This means that for IDs like embedded_controller, this function should be called
* only after acpi_enable_subsystem has been called.
*/
@@ -157,9 +157,9 @@ ACPI_EXPORT_SYMBOL(acpi_install_address_space_handler)
*
* FUNCTION: acpi_remove_address_space_handler
*
- * PARAMETERS: Device - Handle for the device
+ * PARAMETERS: device - Handle for the device
* space_id - The address space ID
- * Handler - Address of the handler
+ * handler - Address of the handler
*
* RETURN: Status
*
diff --git a/drivers/acpi/acpica/exconfig.c b/drivers/acpi/acpica/exconfig.c
index c86d44e..16219bd 100644
--- a/drivers/acpi/acpica/exconfig.c
+++ b/drivers/acpi/acpica/exconfig.c
@@ -66,7 +66,7 @@ acpi_ex_region_read(union acpi_operand_object *obj_desc,
*
* FUNCTION: acpi_ex_add_table
*
- * PARAMETERS: Table - Pointer to raw table
+ * PARAMETERS: table - Pointer to raw table
* parent_node - Where to load the table (scope)
* ddb_handle - Where to return the table handle.
*
@@ -276,8 +276,8 @@ acpi_ex_load_table_op(struct acpi_walk_state *walk_state,
* FUNCTION: acpi_ex_region_read
*
* PARAMETERS: obj_desc - Region descriptor
- * Length - Number of bytes to read
- * Buffer - Pointer to where to put the data
+ * length - Number of bytes to read
+ * buffer - Pointer to where to put the data
*
* RETURN: Status
*
@@ -318,7 +318,7 @@ acpi_ex_region_read(union acpi_operand_object *obj_desc, u32 length, u8 *buffer)
*
* PARAMETERS: obj_desc - Region or Buffer/Field where the table will be
* obtained
- * Target - Where a handle to the table will be stored
+ * target - Where a handle to the table will be stored
* walk_state - Current state
*
* RETURN: Status
diff --git a/drivers/acpi/acpica/exconvrt.c b/drivers/acpi/acpica/exconvrt.c
index e385436..bfb062e 100644
--- a/drivers/acpi/acpica/exconvrt.c
+++ b/drivers/acpi/acpica/exconvrt.c
@@ -60,7 +60,7 @@ acpi_ex_convert_to_ascii(u64 integer, u16 base, u8 *string, u8 max_length);
* PARAMETERS: obj_desc - Object to be converted. Must be an
* Integer, Buffer, or String
* result_desc - Where the new Integer object is returned
- * Flags - Used for string conversion
+ * flags - Used for string conversion
*
* RETURN: Status
*
@@ -272,9 +272,9 @@ acpi_ex_convert_to_buffer(union acpi_operand_object *obj_desc,
*
* FUNCTION: acpi_ex_convert_to_ascii
*
- * PARAMETERS: Integer - Value to be converted
- * Base - ACPI_STRING_DECIMAL or ACPI_STRING_HEX
- * String - Where the string is returned
+ * PARAMETERS: integer - Value to be converted
+ * base - ACPI_STRING_DECIMAL or ACPI_STRING_HEX
+ * string - Where the string is returned
* data_width - Size of data item to be converted, in bytes
*
* RETURN: Actual string length
@@ -385,7 +385,7 @@ acpi_ex_convert_to_ascii(u64 integer, u16 base, u8 *string, u8 data_width)
* PARAMETERS: obj_desc - Object to be converted. Must be an
* Integer, Buffer, or String
* result_desc - Where the string object is returned
- * Type - String flags (base and conversion type)
+ * type - String flags (base and conversion type)
*
* RETURN: Status
*
diff --git a/drivers/acpi/acpica/excreate.c b/drivers/acpi/acpica/excreate.c
index 3f5bc99..691d476 100644
--- a/drivers/acpi/acpica/excreate.c
+++ b/drivers/acpi/acpica/excreate.c
@@ -369,7 +369,7 @@ acpi_ex_create_region(u8 * aml_start,
*
* DESCRIPTION: Create a new processor object and populate the fields
*
- * Processor (Name[0], cpu_iD[1], pblock_addr[2], pblock_length[3])
+ * Processor (Name[0], cpu_ID[1], pblock_addr[2], pblock_length[3])
*
******************************************************************************/
diff --git a/drivers/acpi/acpica/exdebug.c b/drivers/acpi/acpica/exdebug.c
index e211e9c..bc5b9a6 100644
--- a/drivers/acpi/acpica/exdebug.c
+++ b/drivers/acpi/acpica/exdebug.c
@@ -54,8 +54,8 @@ ACPI_MODULE_NAME("exdebug")
* FUNCTION: acpi_ex_do_debug_object
*
* PARAMETERS: source_desc - Object to be output to "Debug Object"
- * Level - Indentation level (used for packages)
- * Index - Current package element, zero if not pkg
+ * level - Indentation level (used for packages)
+ * index - Current package element, zero if not pkg
*
* RETURN: None
*
diff --git a/drivers/acpi/acpica/exdump.c b/drivers/acpi/acpica/exdump.c
index 26c5654..213c081 100644
--- a/drivers/acpi/acpica/exdump.c
+++ b/drivers/acpi/acpica/exdump.c
@@ -323,7 +323,7 @@ static struct acpi_exdump_info *acpi_ex_dump_info[] = {
* FUNCTION: acpi_ex_dump_object
*
* PARAMETERS: obj_desc - Descriptor to dump
- * Info - Info table corresponding to this object
+ * info - Info table corresponding to this object
* type
*
* RETURN: None
@@ -449,7 +449,7 @@ acpi_ex_dump_object(union acpi_operand_object *obj_desc,
* FUNCTION: acpi_ex_dump_operand
*
* PARAMETERS: *obj_desc - Pointer to entry to be dumped
- * Depth - Current nesting depth
+ * depth - Current nesting depth
*
* RETURN: None
*
@@ -731,7 +731,7 @@ void acpi_ex_dump_operand(union acpi_operand_object *obj_desc, u32 depth)
*
* FUNCTION: acpi_ex_dump_operands
*
- * PARAMETERS: Operands - A list of Operand objects
+ * PARAMETERS: operands - A list of Operand objects
* opcode_name - AML opcode name
* num_operands - Operand count for this opcode
*
@@ -774,8 +774,8 @@ acpi_ex_dump_operands(union acpi_operand_object **operands,
*
* FUNCTION: acpi_ex_out* functions
*
- * PARAMETERS: Title - Descriptive text
- * Value - Value to be displayed
+ * PARAMETERS: title - Descriptive text
+ * value - Value to be displayed
*
* DESCRIPTION: Object dump output formatting functions. These functions
* reduce the number of format strings required and keeps them
@@ -797,8 +797,8 @@ static void acpi_ex_out_pointer(char *title, void *value)
*
* FUNCTION: acpi_ex_dump_namespace_node
*
- * PARAMETERS: Node - Descriptor to dump
- * Flags - Force display if TRUE
+ * PARAMETERS: node - Descriptor to dump
+ * flags - Force display if TRUE
*
* DESCRIPTION: Dumps the members of the given.Node
*
@@ -830,7 +830,7 @@ void acpi_ex_dump_namespace_node(struct acpi_namespace_node *node, u32 flags)
*
* FUNCTION: acpi_ex_dump_reference_obj
*
- * PARAMETERS: Object - Descriptor to dump
+ * PARAMETERS: object - Descriptor to dump
*
* DESCRIPTION: Dumps a reference object
*
@@ -887,8 +887,8 @@ static void acpi_ex_dump_reference_obj(union acpi_operand_object *obj_desc)
* FUNCTION: acpi_ex_dump_package_obj
*
* PARAMETERS: obj_desc - Descriptor to dump
- * Level - Indentation Level
- * Index - Package index for this object
+ * level - Indentation Level
+ * index - Package index for this object
*
* DESCRIPTION: Dumps the elements of the package
*
@@ -980,7 +980,7 @@ acpi_ex_dump_package_obj(union acpi_operand_object *obj_desc,
* FUNCTION: acpi_ex_dump_object_descriptor
*
* PARAMETERS: obj_desc - Descriptor to dump
- * Flags - Force display if TRUE
+ * flags - Force display if TRUE
*
* DESCRIPTION: Dumps the members of the object descriptor given.
*
diff --git a/drivers/acpi/acpica/exfldio.c b/drivers/acpi/acpica/exfldio.c
index 149de45..a778415 100644
--- a/drivers/acpi/acpica/exfldio.c
+++ b/drivers/acpi/acpica/exfldio.c
@@ -222,9 +222,9 @@ acpi_ex_setup_region(union acpi_operand_object *obj_desc,
* PARAMETERS: obj_desc - Field to be read
* field_datum_byte_offset - Byte offset of this datum within the
* parent field
- * Value - Where to store value (must at least
+ * value - Where to store value (must at least
* 64 bits)
- * Function - Read or Write flag plus other region-
+ * function - Read or Write flag plus other region-
* dependent flags
*
* RETURN: Status
@@ -315,7 +315,7 @@ acpi_ex_access_region(union acpi_operand_object *obj_desc,
* FUNCTION: acpi_ex_register_overflow
*
* PARAMETERS: obj_desc - Register(Field) to be written
- * Value - Value to be stored
+ * value - Value to be stored
*
* RETURN: TRUE if value overflows the field, FALSE otherwise
*
@@ -365,7 +365,7 @@ acpi_ex_register_overflow(union acpi_operand_object *obj_desc, u64 value)
* PARAMETERS: obj_desc - Field to be read
* field_datum_byte_offset - Byte offset of this datum within the
* parent field
- * Value - Where to store value (must be 64 bits)
+ * value - Where to store value (must be 64 bits)
* read_write - Read or Write flag
*
* RETURN: Status
@@ -574,7 +574,7 @@ acpi_ex_field_datum_io(union acpi_operand_object *obj_desc,
* FUNCTION: acpi_ex_write_with_update_rule
*
* PARAMETERS: obj_desc - Field to be written
- * Mask - bitmask within field datum
+ * mask - bitmask within field datum
* field_value - Value to write
* field_datum_byte_offset - Offset of datum within field
*
@@ -678,7 +678,7 @@ acpi_ex_write_with_update_rule(union acpi_operand_object *obj_desc,
* FUNCTION: acpi_ex_extract_from_field
*
* PARAMETERS: obj_desc - Field to be read
- * Buffer - Where to store the field data
+ * buffer - Where to store the field data
* buffer_length - Length of Buffer
*
* RETURN: Status
@@ -823,7 +823,7 @@ acpi_ex_extract_from_field(union acpi_operand_object *obj_desc,
* FUNCTION: acpi_ex_insert_into_field
*
* PARAMETERS: obj_desc - Field to be written
- * Buffer - Data to be written
+ * buffer - Data to be written
* buffer_length - Length of Buffer
*
* RETURN: Status
diff --git a/drivers/acpi/acpica/exmisc.c b/drivers/acpi/acpica/exmisc.c
index 0a08933..271c0c5 100644
--- a/drivers/acpi/acpica/exmisc.c
+++ b/drivers/acpi/acpica/exmisc.c
@@ -144,8 +144,8 @@ acpi_ex_get_object_reference(union acpi_operand_object *obj_desc,
*
* FUNCTION: acpi_ex_concat_template
*
- * PARAMETERS: Operand0 - First source object
- * Operand1 - Second source object
+ * PARAMETERS: operand0 - First source object
+ * operand1 - Second source object
* actual_return_desc - Where to place the return object
* walk_state - Current walk state
*
@@ -229,8 +229,8 @@ acpi_ex_concat_template(union acpi_operand_object *operand0,
*
* FUNCTION: acpi_ex_do_concatenate
*
- * PARAMETERS: Operand0 - First source object
- * Operand1 - Second source object
+ * PARAMETERS: operand0 - First source object
+ * operand1 - Second source object
* actual_return_desc - Where to place the return object
* walk_state - Current walk state
*
@@ -397,9 +397,9 @@ acpi_ex_do_concatenate(union acpi_operand_object *operand0,
*
* FUNCTION: acpi_ex_do_math_op
*
- * PARAMETERS: Opcode - AML opcode
- * Integer0 - Integer operand #0
- * Integer1 - Integer operand #1
+ * PARAMETERS: opcode - AML opcode
+ * integer0 - Integer operand #0
+ * integer1 - Integer operand #1
*
* RETURN: Integer result of the operation
*
@@ -479,9 +479,9 @@ u64 acpi_ex_do_math_op(u16 opcode, u64 integer0, u64 integer1)
*
* FUNCTION: acpi_ex_do_logical_numeric_op
*
- * PARAMETERS: Opcode - AML opcode
- * Integer0 - Integer operand #0
- * Integer1 - Integer operand #1
+ * PARAMETERS: opcode - AML opcode
+ * integer0 - Integer operand #0
+ * integer1 - Integer operand #1
* logical_result - TRUE/FALSE result of the operation
*
* RETURN: Status
@@ -534,9 +534,9 @@ acpi_ex_do_logical_numeric_op(u16 opcode,
*
* FUNCTION: acpi_ex_do_logical_op
*
- * PARAMETERS: Opcode - AML opcode
- * Operand0 - operand #0
- * Operand1 - operand #1
+ * PARAMETERS: opcode - AML opcode
+ * operand0 - operand #0
+ * operand1 - operand #1
* logical_result - TRUE/FALSE result of the operation
*
* RETURN: Status
diff --git a/drivers/acpi/acpica/exmutex.c b/drivers/acpi/acpica/exmutex.c
index 60933e9..bcceda5 100644
--- a/drivers/acpi/acpica/exmutex.c
+++ b/drivers/acpi/acpica/exmutex.c
@@ -102,7 +102,7 @@ void acpi_ex_unlink_mutex(union acpi_operand_object *obj_desc)
* FUNCTION: acpi_ex_link_mutex
*
* PARAMETERS: obj_desc - The mutex to be linked
- * Thread - Current executing thread object
+ * thread - Current executing thread object
*
* RETURN: None
*
@@ -138,7 +138,7 @@ acpi_ex_link_mutex(union acpi_operand_object *obj_desc,
*
* FUNCTION: acpi_ex_acquire_mutex_object
*
- * PARAMETERS: Timeout - Timeout in milliseconds
+ * PARAMETERS: timeout - Timeout in milliseconds
* obj_desc - Mutex object
* thread_id - Current thread state
*
@@ -443,7 +443,7 @@ acpi_ex_release_mutex(union acpi_operand_object *obj_desc,
*
* FUNCTION: acpi_ex_release_all_mutexes
*
- * PARAMETERS: Thread - Current executing thread object
+ * PARAMETERS: thread - Current executing thread object
*
* RETURN: Status
*
diff --git a/drivers/acpi/acpica/exprep.c b/drivers/acpi/acpica/exprep.c
index ae62038..81eca60 100644
--- a/drivers/acpi/acpica/exprep.c
+++ b/drivers/acpi/acpica/exprep.c
@@ -391,7 +391,7 @@ acpi_ex_prep_common_field_object(union acpi_operand_object *obj_desc,
*
* FUNCTION: acpi_ex_prep_field_value
*
- * PARAMETERS: Info - Contains all field creation info
+ * PARAMETERS: info - Contains all field creation info
*
* RETURN: Status
*
diff --git a/drivers/acpi/acpica/exregion.c b/drivers/acpi/acpica/exregion.c
index 12d51df..1f1ce0c 100644
--- a/drivers/acpi/acpica/exregion.c
+++ b/drivers/acpi/acpica/exregion.c
@@ -53,10 +53,10 @@ ACPI_MODULE_NAME("exregion")
*
* FUNCTION: acpi_ex_system_memory_space_handler
*
- * PARAMETERS: Function - Read or Write operation
- * Address - Where in the space to read or write
+ * PARAMETERS: function - Read or Write operation
+ * address - Where in the space to read or write
* bit_width - Field width in bits (8, 16, or 32)
- * Value - Pointer to in or out value
+ * value - Pointer to in or out value
* handler_context - Pointer to Handler's context
* region_context - Pointer to context specific to the
* accessed region
@@ -270,10 +270,10 @@ acpi_ex_system_memory_space_handler(u32 function,
*
* FUNCTION: acpi_ex_system_io_space_handler
*
- * PARAMETERS: Function - Read or Write operation
- * Address - Where in the space to read or write
+ * PARAMETERS: function - Read or Write operation
+ * address - Where in the space to read or write
* bit_width - Field width in bits (8, 16, or 32)
- * Value - Pointer to in or out value
+ * value - Pointer to in or out value
* handler_context - Pointer to Handler's context
* region_context - Pointer to context specific to the
* accessed region
@@ -329,10 +329,10 @@ acpi_ex_system_io_space_handler(u32 function,
*
* FUNCTION: acpi_ex_pci_config_space_handler
*
- * PARAMETERS: Function - Read or Write operation
- * Address - Where in the space to read or write
+ * PARAMETERS: function - Read or Write operation
+ * address - Where in the space to read or write
* bit_width - Field width in bits (8, 16, or 32)
- * Value - Pointer to in or out value
+ * value - Pointer to in or out value
* handler_context - Pointer to Handler's context
* region_context - Pointer to context specific to the
* accessed region
@@ -365,7 +365,7 @@ acpi_ex_pci_config_space_handler(u32 function,
* pci_function is the PCI device function number
* pci_register is the Config space register range 0-255 bytes
*
- * Value - input value for write, output address for read
+ * value - input value for write, output address for read
*
*/
pci_id = (struct acpi_pci_id *)region_context;
@@ -402,10 +402,10 @@ acpi_ex_pci_config_space_handler(u32 function,
*
* FUNCTION: acpi_ex_cmos_space_handler
*
- * PARAMETERS: Function - Read or Write operation
- * Address - Where in the space to read or write
+ * PARAMETERS: function - Read or Write operation
+ * address - Where in the space to read or write
* bit_width - Field width in bits (8, 16, or 32)
- * Value - Pointer to in or out value
+ * value - Pointer to in or out value
* handler_context - Pointer to Handler's context
* region_context - Pointer to context specific to the
* accessed region
@@ -434,10 +434,10 @@ acpi_ex_cmos_space_handler(u32 function,
*
* FUNCTION: acpi_ex_pci_bar_space_handler
*
- * PARAMETERS: Function - Read or Write operation
- * Address - Where in the space to read or write
+ * PARAMETERS: function - Read or Write operation
+ * address - Where in the space to read or write
* bit_width - Field width in bits (8, 16, or 32)
- * Value - Pointer to in or out value
+ * value - Pointer to in or out value
* handler_context - Pointer to Handler's context
* region_context - Pointer to context specific to the
* accessed region
@@ -466,10 +466,10 @@ acpi_ex_pci_bar_space_handler(u32 function,
*
* FUNCTION: acpi_ex_data_table_space_handler
*
- * PARAMETERS: Function - Read or Write operation
- * Address - Where in the space to read or write
+ * PARAMETERS: function - Read or Write operation
+ * address - Where in the space to read or write
* bit_width - Field width in bits (8, 16, or 32)
- * Value - Pointer to in or out value
+ * value - Pointer to in or out value
* handler_context - Pointer to Handler's context
* region_context - Pointer to context specific to the
* accessed region
diff --git a/drivers/acpi/acpica/exresolv.c b/drivers/acpi/acpica/exresolv.c
index c6f0ad4..bbf40ac 100644
--- a/drivers/acpi/acpica/exresolv.c
+++ b/drivers/acpi/acpica/exresolv.c
@@ -321,7 +321,7 @@ acpi_ex_resolve_object_to_value(union acpi_operand_object **stack_ptr,
* FUNCTION: acpi_ex_resolve_multiple
*
* PARAMETERS: walk_state - Current state (contains AML opcode)
- * Operand - Starting point for resolution
+ * operand - Starting point for resolution
* return_type - Where the object type is returned
* return_desc - Where the resolved object is returned
*
diff --git a/drivers/acpi/acpica/exresop.c b/drivers/acpi/acpica/exresop.c
index a67b1d9..f232fba 100644
--- a/drivers/acpi/acpica/exresop.c
+++ b/drivers/acpi/acpica/exresop.c
@@ -113,7 +113,7 @@ acpi_ex_check_object_type(acpi_object_type type_needed,
*
* FUNCTION: acpi_ex_resolve_operands
*
- * PARAMETERS: Opcode - Opcode being interpreted
+ * PARAMETERS: opcode - Opcode being interpreted
* stack_ptr - Pointer to the operand stack to be
* resolved
* walk_state - Current state
@@ -307,7 +307,7 @@ acpi_ex_resolve_operands(u16 opcode,
case ARGI_DEVICE_REF:
case ARGI_TARGETREF: /* Allows implicit conversion rules before store */
case ARGI_FIXED_TARGET: /* No implicit conversion before store to target */
- case ARGI_SIMPLE_TARGET: /* Name, Local, or Arg - no implicit conversion */
+ case ARGI_SIMPLE_TARGET: /* Name, Local, or arg - no implicit conversion */
/*
* Need an operand of type ACPI_TYPE_LOCAL_REFERENCE
@@ -410,7 +410,7 @@ acpi_ex_resolve_operands(u16 opcode,
/*
* Need an operand of type ACPI_TYPE_INTEGER,
* But we can implicitly convert from a STRING or BUFFER
- * Aka - "Implicit Source Operand Conversion"
+ * aka - "Implicit Source Operand Conversion"
*/
status =
acpi_ex_convert_to_integer(obj_desc, stack_ptr, 16);
@@ -437,7 +437,7 @@ acpi_ex_resolve_operands(u16 opcode,
/*
* Need an operand of type ACPI_TYPE_BUFFER,
* But we can implicitly convert from a STRING or INTEGER
- * Aka - "Implicit Source Operand Conversion"
+ * aka - "Implicit Source Operand Conversion"
*/
status = acpi_ex_convert_to_buffer(obj_desc, stack_ptr);
if (ACPI_FAILURE(status)) {
@@ -463,7 +463,7 @@ acpi_ex_resolve_operands(u16 opcode,
/*
* Need an operand of type ACPI_TYPE_STRING,
* But we can implicitly convert from a BUFFER or INTEGER
- * Aka - "Implicit Source Operand Conversion"
+ * aka - "Implicit Source Operand Conversion"
*/
status = acpi_ex_convert_to_string(obj_desc, stack_ptr,
ACPI_IMPLICIT_CONVERT_HEX);
diff --git a/drivers/acpi/acpica/exstore.c b/drivers/acpi/acpica/exstore.c
index 38c5048..5fffe7a 100644
--- a/drivers/acpi/acpica/exstore.c
+++ b/drivers/acpi/acpica/exstore.c
@@ -361,7 +361,7 @@ acpi_ex_store_object_to_index(union acpi_operand_object *source_desc,
* FUNCTION: acpi_ex_store_object_to_node
*
* PARAMETERS: source_desc - Value to be stored
- * Node - Named object to receive the value
+ * node - Named object to receive the value
* walk_state - Current walk state
* implicit_conversion - Perform implicit conversion (yes/no)
*
diff --git a/drivers/acpi/acpica/exstorob.c b/drivers/acpi/acpica/exstorob.c
index 65a45d8..53c2484 100644
--- a/drivers/acpi/acpica/exstorob.c
+++ b/drivers/acpi/acpica/exstorob.c
@@ -110,7 +110,7 @@ acpi_ex_store_buffer_to_buffer(union acpi_operand_object *source_desc,
* NOTE: ACPI versions up to 3.0 specified that the buffer must be
* truncated if the string is smaller than the buffer. However, "other"
* implementations of ACPI never did this and thus became the defacto
- * standard. ACPI 3.0_a changes this behavior such that the buffer
+ * standard. ACPI 3.0A changes this behavior such that the buffer
* is no longer truncated.
*/
diff --git a/drivers/acpi/acpica/exsystem.c b/drivers/acpi/acpica/exsystem.c
index 191a129..b760641 100644
--- a/drivers/acpi/acpica/exsystem.c
+++ b/drivers/acpi/acpica/exsystem.c
@@ -53,8 +53,8 @@ ACPI_MODULE_NAME("exsystem")
*
* FUNCTION: acpi_ex_system_wait_semaphore
*
- * PARAMETERS: Semaphore - Semaphore to wait on
- * Timeout - Max time to wait
+ * PARAMETERS: semaphore - Semaphore to wait on
+ * timeout - Max time to wait
*
* RETURN: Status
*
@@ -98,8 +98,8 @@ acpi_status acpi_ex_system_wait_semaphore(acpi_semaphore semaphore, u16 timeout)
*
* FUNCTION: acpi_ex_system_wait_mutex
*
- * PARAMETERS: Mutex - Mutex to wait on
- * Timeout - Max time to wait
+ * PARAMETERS: mutex - Mutex to wait on
+ * timeout - Max time to wait
*
* RETURN: Status
*
diff --git a/drivers/acpi/acpica/exutils.c b/drivers/acpi/acpica/exutils.c
index 7482400..d1ab791 100644
--- a/drivers/acpi/acpica/exutils.c
+++ b/drivers/acpi/acpica/exutils.c
@@ -317,8 +317,8 @@ void acpi_ex_release_global_lock(u32 field_flags)
*
* FUNCTION: acpi_ex_digits_needed
*
- * PARAMETERS: Value - Value to be represented
- * Base - Base of representation
+ * PARAMETERS: value - Value to be represented
+ * base - Base of representation
*
* RETURN: The number of digits.
*
@@ -408,7 +408,7 @@ void acpi_ex_eisa_id_to_string(char *out_string, u64 compressed_id)
* PARAMETERS: out_string - Where to put the converted string. At least
* 21 bytes are needed to hold the largest
* possible 64-bit integer.
- * Value - Value to be converted
+ * value - Value to be converted
*
* RETURN: None, string
*
@@ -443,7 +443,7 @@ void acpi_ex_integer_to_string(char *out_string, u64 value)
*
* RETURN: TRUE if valid/supported ID.
*
- * DESCRIPTION: Validate an operation region space_iD.
+ * DESCRIPTION: Validate an operation region space_ID.
*
******************************************************************************/
diff --git a/drivers/acpi/acpica/hwacpi.c b/drivers/acpi/acpica/hwacpi.c
index d0b9ed5..a1e71d0 100644
--- a/drivers/acpi/acpica/hwacpi.c
+++ b/drivers/acpi/acpica/hwacpi.c
@@ -53,7 +53,7 @@ ACPI_MODULE_NAME("hwacpi")
*
* FUNCTION: acpi_hw_set_mode
*
- * PARAMETERS: Mode - SYS_MODE_ACPI or SYS_MODE_LEGACY
+ * PARAMETERS: mode - SYS_MODE_ACPI or SYS_MODE_LEGACY
*
* RETURN: Status
*
diff --git a/drivers/acpi/acpica/hwesleep.c b/drivers/acpi/acpica/hwesleep.c
index 3680c45..48518da 100644
--- a/drivers/acpi/acpica/hwesleep.c
+++ b/drivers/acpi/acpica/hwesleep.c
@@ -90,7 +90,7 @@ void acpi_hw_execute_sleep_method(char *method_pathname, u32 integer_argument)
* FUNCTION: acpi_hw_extended_sleep
*
* PARAMETERS: sleep_state - Which sleep state to enter
- * Flags - ACPI_EXECUTE_GTS to run optional method
+ * flags - ACPI_EXECUTE_GTS to run optional method
*
* RETURN: Status
*
@@ -172,7 +172,7 @@ acpi_status acpi_hw_extended_sleep(u8 sleep_state, u8 flags)
* FUNCTION: acpi_hw_extended_wake_prep
*
* PARAMETERS: sleep_state - Which sleep state we just exited
- * Flags - ACPI_EXECUTE_BFS to run optional method
+ * flags - ACPI_EXECUTE_BFS to run optional method
*
* RETURN: Status
*
@@ -213,7 +213,7 @@ acpi_status acpi_hw_extended_wake_prep(u8 sleep_state, u8 flags)
* FUNCTION: acpi_hw_extended_wake
*
* PARAMETERS: sleep_state - Which sleep state we just exited
- * Flags - Reserved, set to zero
+ * flags - Reserved, set to zero
*
* RETURN: Status
*
diff --git a/drivers/acpi/acpica/hwregs.c b/drivers/acpi/acpica/hwregs.c
index 6b6c83b..4af6d20 100644
--- a/drivers/acpi/acpica/hwregs.c
+++ b/drivers/acpi/acpica/hwregs.c
@@ -69,9 +69,9 @@ acpi_hw_write_multiple(u32 value,
*
* FUNCTION: acpi_hw_validate_register
*
- * PARAMETERS: Reg - GAS register structure
+ * PARAMETERS: reg - GAS register structure
* max_bit_width - Max bit_width supported (32 or 64)
- * Address - Pointer to where the gas->address
+ * address - Pointer to where the gas->address
* is returned
*
* RETURN: Status
@@ -102,7 +102,7 @@ acpi_hw_validate_register(struct acpi_generic_address *reg,
return (AE_BAD_ADDRESS);
}
- /* Validate the space_iD */
+ /* Validate the space_ID */
if ((reg->space_id != ACPI_ADR_SPACE_SYSTEM_MEMORY) &&
(reg->space_id != ACPI_ADR_SPACE_SYSTEM_IO)) {
@@ -137,8 +137,8 @@ acpi_hw_validate_register(struct acpi_generic_address *reg,
*
* FUNCTION: acpi_hw_read
*
- * PARAMETERS: Value - Where the value is returned
- * Reg - GAS register structure
+ * PARAMETERS: value - Where the value is returned
+ * reg - GAS register structure
*
* RETURN: Status
*
@@ -148,7 +148,7 @@ acpi_hw_validate_register(struct acpi_generic_address *reg,
*
* LIMITATIONS: <These limitations also apply to acpi_hw_write>
* bit_width must be exactly 8, 16, or 32.
- * space_iD must be system_memory or system_iO.
+ * space_ID must be system_memory or system_IO.
* bit_offset and access_width are currently ignored, as there has
* not been a need to implement these.
*
@@ -200,8 +200,8 @@ acpi_status acpi_hw_read(u32 *value, struct acpi_generic_address *reg)
*
* FUNCTION: acpi_hw_write
*
- * PARAMETERS: Value - Value to be written
- * Reg - GAS register structure
+ * PARAMETERS: value - Value to be written
+ * reg - GAS register structure
*
* RETURN: Status
*
@@ -439,7 +439,7 @@ acpi_hw_register_read(u32 register_id, u32 * return_value)
* FUNCTION: acpi_hw_register_write
*
* PARAMETERS: register_id - ACPI Register ID
- * Value - The value to write
+ * value - The value to write
*
* RETURN: Status
*
@@ -571,7 +571,7 @@ acpi_status acpi_hw_register_write(u32 register_id, u32 value)
*
* FUNCTION: acpi_hw_read_multiple
*
- * PARAMETERS: Value - Where the register value is returned
+ * PARAMETERS: value - Where the register value is returned
* register_a - First ACPI register (required)
* register_b - Second ACPI register (optional)
*
@@ -624,7 +624,7 @@ acpi_hw_read_multiple(u32 *value,
*
* FUNCTION: acpi_hw_write_multiple
*
- * PARAMETERS: Value - The value to write
+ * PARAMETERS: value - The value to write
* register_a - First ACPI register (required)
* register_b - Second ACPI register (optional)
*
diff --git a/drivers/acpi/acpica/hwsleep.c b/drivers/acpi/acpica/hwsleep.c
index 0ed85ca..8049fbe 100644
--- a/drivers/acpi/acpica/hwsleep.c
+++ b/drivers/acpi/acpica/hwsleep.c
@@ -56,7 +56,7 @@ ACPI_MODULE_NAME("hwsleep")
* FUNCTION: acpi_hw_legacy_sleep
*
* PARAMETERS: sleep_state - Which sleep state to enter
- * Flags - ACPI_EXECUTE_GTS to run optional method
+ * flags - ACPI_EXECUTE_GTS to run optional method
*
* RETURN: Status
*
@@ -226,7 +226,7 @@ acpi_status acpi_hw_legacy_sleep(u8 sleep_state, u8 flags)
* FUNCTION: acpi_hw_legacy_wake_prep
*
* PARAMETERS: sleep_state - Which sleep state we just exited
- * Flags - ACPI_EXECUTE_BFS to run optional method
+ * flags - ACPI_EXECUTE_BFS to run optional method
*
* RETURN: Status
*
@@ -300,7 +300,7 @@ acpi_status acpi_hw_legacy_wake_prep(u8 sleep_state, u8 flags)
* FUNCTION: acpi_hw_legacy_wake
*
* PARAMETERS: sleep_state - Which sleep state we just exited
- * Flags - Reserved, set to zero
+ * flags - Reserved, set to zero
*
* RETURN: Status
*
diff --git a/drivers/acpi/acpica/hwtimer.c b/drivers/acpi/acpica/hwtimer.c
index f1b2c3b..b6411f1 100644
--- a/drivers/acpi/acpica/hwtimer.c
+++ b/drivers/acpi/acpica/hwtimer.c
@@ -54,7 +54,7 @@ ACPI_MODULE_NAME("hwtimer")
*
* FUNCTION: acpi_get_timer_resolution
*
- * PARAMETERS: Resolution - Where the resolution is returned
+ * PARAMETERS: resolution - Where the resolution is returned
*
* RETURN: Status and timer resolution
*
@@ -84,7 +84,7 @@ ACPI_EXPORT_SYMBOL(acpi_get_timer_resolution)
*
* FUNCTION: acpi_get_timer
*
- * PARAMETERS: Ticks - Where the timer value is returned
+ * PARAMETERS: ticks - Where the timer value is returned
*
* RETURN: Status and current timer value (ticks)
*
diff --git a/drivers/acpi/acpica/hwvalid.c b/drivers/acpi/acpica/hwvalid.c
index 6e5c43a..c99d546 100644
--- a/drivers/acpi/acpica/hwvalid.c
+++ b/drivers/acpi/acpica/hwvalid.c
@@ -58,7 +58,7 @@ acpi_hw_validate_io_request(acpi_io_address address, u32 bit_width);
*
* The table is used to implement the Microsoft port access rules that
* first appeared in Windows XP. Some ports are always illegal, and some
- * ports are only illegal if the BIOS calls _OSI with a win_xP string or
+ * ports are only illegal if the BIOS calls _OSI with a win_XP string or
* later (meaning that the BIOS itelf is post-XP.)
*
* This provides ACPICA with the desired port protections and
@@ -66,7 +66,7 @@ acpi_hw_validate_io_request(acpi_io_address address, u32 bit_width);
*
* Description of port entries:
* DMA: DMA controller
- * PIC0: Programmable Interrupt Controller (8259_a)
+ * PIC0: Programmable Interrupt Controller (8259A)
* PIT1: System Timer 1
* PIT2: System Timer 2 failsafe
* RTC: Real-time clock
diff --git a/drivers/acpi/acpica/hwxface.c b/drivers/acpi/acpica/hwxface.c
index a716fed..7bfd649 100644
--- a/drivers/acpi/acpica/hwxface.c
+++ b/drivers/acpi/acpica/hwxface.c
@@ -104,8 +104,8 @@ ACPI_EXPORT_SYMBOL(acpi_reset)
*
* FUNCTION: acpi_read
*
- * PARAMETERS: Value - Where the value is returned
- * Reg - GAS register structure
+ * PARAMETERS: value - Where the value is returned
+ * reg - GAS register structure
*
* RETURN: Status
*
@@ -113,7 +113,7 @@ ACPI_EXPORT_SYMBOL(acpi_reset)
*
* LIMITATIONS: <These limitations also apply to acpi_write>
* bit_width must be exactly 8, 16, 32, or 64.
- * space_iD must be system_memory or system_iO.
+ * space_ID must be system_memory or system_IO.
* bit_offset and access_width are currently ignored, as there has
* not been a need to implement these.
*
@@ -196,8 +196,8 @@ ACPI_EXPORT_SYMBOL(acpi_read)
*
* FUNCTION: acpi_write
*
- * PARAMETERS: Value - Value to be written
- * Reg - GAS register structure
+ * PARAMETERS: value - Value to be written
+ * reg - GAS register structure
*
* RETURN: Status
*
@@ -441,7 +441,7 @@ ACPI_EXPORT_SYMBOL(acpi_write_bit_register)
* *sleep_type_a - Where SLP_TYPa is returned
* *sleep_type_b - Where SLP_TYPb is returned
*
- * RETURN: Status - ACPI status
+ * RETURN: status - ACPI status
*
* DESCRIPTION: Obtain the SLP_TYPa and SLP_TYPb values for the requested sleep
* state.
diff --git a/drivers/acpi/acpica/hwxfsleep.c b/drivers/acpi/acpica/hwxfsleep.c
index 762d059..f8684bf 100644
--- a/drivers/acpi/acpica/hwxfsleep.c
+++ b/drivers/acpi/acpica/hwxfsleep.c
@@ -205,7 +205,7 @@ acpi_status asmlinkage acpi_enter_sleep_state_s4bios(void)
ACPI_FLUSH_CPU_CACHE();
status = acpi_hw_write_port(acpi_gbl_FADT.smi_command,
- (u32)acpi_gbl_FADT.S4bios_request, 8);
+ (u32)acpi_gbl_FADT.s4_bios_request, 8);
do {
acpi_os_stall(1000);
@@ -349,7 +349,7 @@ ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state_prep)
* FUNCTION: acpi_enter_sleep_state
*
* PARAMETERS: sleep_state - Which sleep state to enter
- * Flags - ACPI_EXECUTE_GTS to run optional method
+ * flags - ACPI_EXECUTE_GTS to run optional method
*
* RETURN: Status
*
@@ -382,7 +382,7 @@ ACPI_EXPORT_SYMBOL(acpi_enter_sleep_state)
* FUNCTION: acpi_leave_sleep_state_prep
*
* PARAMETERS: sleep_state - Which sleep state we are exiting
- * Flags - ACPI_EXECUTE_BFS to run optional method
+ * flags - ACPI_EXECUTE_BFS to run optional method
*
* RETURN: Status
*
diff --git a/drivers/acpi/acpica/nsaccess.c b/drivers/acpi/acpica/nsaccess.c
index 61623f3..23db53c 100644
--- a/drivers/acpi/acpica/nsaccess.c
+++ b/drivers/acpi/acpica/nsaccess.c
@@ -157,7 +157,7 @@ acpi_status acpi_ns_root_initialize(void)
#if defined (ACPI_ASL_COMPILER)
- /* Save the parameter count for the i_aSL compiler */
+ /* Save the parameter count for the iASL compiler */
new_node->value = obj_desc->method.param_count;
#else
@@ -258,11 +258,11 @@ acpi_status acpi_ns_root_initialize(void)
* FUNCTION: acpi_ns_lookup
*
* PARAMETERS: scope_info - Current scope info block
- * Pathname - Search pathname, in internal format
+ * pathname - Search pathname, in internal format
* (as represented in the AML stream)
- * Type - Type associated with name
+ * type - Type associated with name
* interpreter_mode - IMODE_LOAD_PASS2 => add name if not found
- * Flags - Flags describing the search restrictions
+ * flags - Flags describing the search restrictions
* walk_state - Current state of the walk
* return_node - Where the Node is placed (if found
* or created successfully)
diff --git a/drivers/acpi/acpica/nsalloc.c b/drivers/acpi/acpica/nsalloc.c
index 7c3d3ce..ac389e5 100644
--- a/drivers/acpi/acpica/nsalloc.c
+++ b/drivers/acpi/acpica/nsalloc.c
@@ -52,7 +52,7 @@ ACPI_MODULE_NAME("nsalloc")
*
* FUNCTION: acpi_ns_create_node
*
- * PARAMETERS: Name - Name of the new node (4 char ACPI name)
+ * PARAMETERS: name - Name of the new node (4 char ACPI name)
*
* RETURN: New namespace node (Null on failure)
*
@@ -92,7 +92,7 @@ struct acpi_namespace_node *acpi_ns_create_node(u32 name)
*
* FUNCTION: acpi_ns_delete_node
*
- * PARAMETERS: Node - Node to be deleted
+ * PARAMETERS: node - Node to be deleted
*
* RETURN: None
*
@@ -143,7 +143,7 @@ void acpi_ns_delete_node(struct acpi_namespace_node *node)
*
* FUNCTION: acpi_ns_remove_node
*
- * PARAMETERS: Node - Node to be removed/deleted
+ * PARAMETERS: node - Node to be removed/deleted
*
* RETURN: None
*
@@ -196,8 +196,8 @@ void acpi_ns_remove_node(struct acpi_namespace_node *node)
*
* PARAMETERS: walk_state - Current state of the walk
* parent_node - The parent of the new Node
- * Node - The new Node to install
- * Type - ACPI object type of the new Node
+ * node - The new Node to install
+ * type - ACPI object type of the new Node
*
* RETURN: None
*
diff --git a/drivers/acpi/acpica/nsdump.c b/drivers/acpi/acpica/nsdump.c
index 3f7f3f6..7ee4e6a 100644
--- a/drivers/acpi/acpica/nsdump.c
+++ b/drivers/acpi/acpica/nsdump.c
@@ -63,7 +63,7 @@ acpi_ns_dump_one_device(acpi_handle obj_handle,
* FUNCTION: acpi_ns_print_pathname
*
* PARAMETERS: num_segments - Number of ACPI name segments
- * Pathname - The compressed (internal) path
+ * pathname - The compressed (internal) path
*
* RETURN: None
*
@@ -107,10 +107,10 @@ void acpi_ns_print_pathname(u32 num_segments, char *pathname)
*
* FUNCTION: acpi_ns_dump_pathname
*
- * PARAMETERS: Handle - Object
- * Msg - Prefix message
- * Level - Desired debug level
- * Component - Caller's component ID
+ * PARAMETERS: handle - Object
+ * msg - Prefix message
+ * level - Desired debug level
+ * component - Caller's component ID
*
* RETURN: None
*
@@ -143,8 +143,8 @@ acpi_ns_dump_pathname(acpi_handle handle, char *msg, u32 level, u32 component)
* FUNCTION: acpi_ns_dump_one_object
*
* PARAMETERS: obj_handle - Node to be dumped
- * Level - Nesting level of the handle
- * Context - Passed into walk_namespace
+ * level - Nesting level of the handle
+ * context - Passed into walk_namespace
* return_value - Not used
*
* RETURN: Status
@@ -615,7 +615,7 @@ acpi_ns_dump_one_object(acpi_handle obj_handle,
*
* FUNCTION: acpi_ns_dump_objects
*
- * PARAMETERS: Type - Object type to be dumped
+ * PARAMETERS: type - Object type to be dumped
* display_type - 0 or ACPI_DISPLAY_SUMMARY
* max_depth - Maximum depth of dump. Use ACPI_UINT32_MAX
* for an effectively unlimited depth.
@@ -671,7 +671,7 @@ acpi_ns_dump_objects(acpi_object_type type,
*
* FUNCTION: acpi_ns_dump_entry
*
- * PARAMETERS: Handle - Node to be dumped
+ * PARAMETERS: handle - Node to be dumped
* debug_level - Output level
*
* RETURN: None
diff --git a/drivers/acpi/acpica/nsdumpdv.c b/drivers/acpi/acpica/nsdumpdv.c
index 3b5acb0..944d4c8 100644
--- a/drivers/acpi/acpica/nsdumpdv.c
+++ b/drivers/acpi/acpica/nsdumpdv.c
@@ -55,9 +55,9 @@ ACPI_MODULE_NAME("nsdumpdv")
*
* FUNCTION: acpi_ns_dump_one_device
*
- * PARAMETERS: Handle - Node to be dumped
- * Level - Nesting level of the handle
- * Context - Passed into walk_namespace
+ * PARAMETERS: handle - Node to be dumped
+ * level - Nesting level of the handle
+ * context - Passed into walk_namespace
* return_value - Not used
*
* RETURN: Status
diff --git a/drivers/acpi/acpica/nseval.c b/drivers/acpi/acpica/nseval.c
index f375cb8..69074be 100644
--- a/drivers/acpi/acpica/nseval.c
+++ b/drivers/acpi/acpica/nseval.c
@@ -59,11 +59,11 @@ acpi_ns_exec_module_code(union acpi_operand_object *method_obj,
*
* FUNCTION: acpi_ns_evaluate
*
- * PARAMETERS: Info - Evaluation info block, contains:
+ * PARAMETERS: info - Evaluation info block, contains:
* prefix_node - Prefix or Method/Object Node to execute
- * Pathname - Name of method to execute, If NULL, the
+ * pathname - Name of method to execute, If NULL, the
* Node is the object to execute
- * Parameters - List of parameters to pass to the method,
+ * parameters - List of parameters to pass to the method,
* terminated by NULL. Params itself may be
* NULL if no parameters are being passed.
* return_object - Where to put method's return value (if
@@ -71,7 +71,7 @@ acpi_ns_exec_module_code(union acpi_operand_object *method_obj,
* parameter_type - Type of Parameter list
* return_object - Where to put method's return value (if
* any). If NULL, no value is returned.
- * Flags - ACPI_IGNORE_RETURN_VALUE to delete return
+ * flags - ACPI_IGNORE_RETURN_VALUE to delete return
*
* RETURN: Status
*
@@ -351,7 +351,7 @@ void acpi_ns_exec_module_code_list(void)
* FUNCTION: acpi_ns_exec_module_code
*
* PARAMETERS: method_obj - Object container for the module-level code
- * Info - Info block for method evaluation
+ * info - Info block for method evaluation
*
* RETURN: None. Exceptions during method execution are ignored, since
* we cannot abort a table load.
diff --git a/drivers/acpi/acpica/nsinit.c b/drivers/acpi/acpica/nsinit.c
index 9d84ec2..95ffe8d 100644
--- a/drivers/acpi/acpica/nsinit.c
+++ b/drivers/acpi/acpica/nsinit.c
@@ -224,8 +224,8 @@ acpi_status acpi_ns_initialize_devices(void)
* FUNCTION: acpi_ns_init_one_object
*
* PARAMETERS: obj_handle - Node
- * Level - Current nesting level
- * Context - Points to a init info struct
+ * level - Current nesting level
+ * context - Points to a init info struct
* return_value - Not used
*
* RETURN: Status
@@ -530,7 +530,7 @@ acpi_ns_init_one_device(acpi_handle obj_handle,
* we will not run _INI, but we continue to examine the children
* of this device.
*
- * From the ACPI spec, description of _STA: (Note - no mention
+ * From the ACPI spec, description of _STA: (note - no mention
* of whether to run _INI or not on the device in question)
*
* "_STA may return bit 0 clear (not present) with bit 3 set
diff --git a/drivers/acpi/acpica/nsload.c b/drivers/acpi/acpica/nsload.c
index 5cbf15f..76935ff 100644
--- a/drivers/acpi/acpica/nsload.c
+++ b/drivers/acpi/acpica/nsload.c
@@ -63,7 +63,7 @@ static acpi_status acpi_ns_delete_subtree(acpi_handle start_handle);
* FUNCTION: acpi_ns_load_table
*
* PARAMETERS: table_index - Index for table to be loaded
- * Node - Owning NS node
+ * node - Owning NS node
*
* RETURN: Status
*
@@ -278,7 +278,7 @@ static acpi_status acpi_ns_delete_subtree(acpi_handle start_handle)
*
* FUNCTION: acpi_ns_unload_name_space
*
- * PARAMETERS: Handle - Root of namespace subtree to be deleted
+ * PARAMETERS: handle - Root of namespace subtree to be deleted
*
* RETURN: Status
*
diff --git a/drivers/acpi/acpica/nsnames.c b/drivers/acpi/acpica/nsnames.c
index b20e7c8..96e0eb6 100644
--- a/drivers/acpi/acpica/nsnames.c
+++ b/drivers/acpi/acpica/nsnames.c
@@ -53,8 +53,8 @@ ACPI_MODULE_NAME("nsnames")
*
* FUNCTION: acpi_ns_build_external_path
*
- * PARAMETERS: Node - NS node whose pathname is needed
- * Size - Size of the pathname
+ * PARAMETERS: node - NS node whose pathname is needed
+ * size - Size of the pathname
* *name_buffer - Where to return the pathname
*
* RETURN: Status
@@ -120,7 +120,7 @@ acpi_ns_build_external_path(struct acpi_namespace_node *node,
*
* FUNCTION: acpi_ns_get_external_pathname
*
- * PARAMETERS: Node - Namespace node whose pathname is needed
+ * PARAMETERS: node - Namespace node whose pathname is needed
*
* RETURN: Pointer to storage containing the fully qualified name of
* the node, In external format (name segments separated by path
@@ -168,7 +168,7 @@ char *acpi_ns_get_external_pathname(struct acpi_namespace_node *node)
*
* FUNCTION: acpi_ns_get_pathname_length
*
- * PARAMETERS: Node - Namespace node
+ * PARAMETERS: node - Namespace node
*
* RETURN: Length of path, including prefix
*
@@ -214,7 +214,7 @@ acpi_size acpi_ns_get_pathname_length(struct acpi_namespace_node *node)
*
* PARAMETERS: target_handle - Handle of named object whose name is
* to be found
- * Buffer - Where the pathname is returned
+ * buffer - Where the pathname is returned
*
* RETURN: Status, Buffer is filled with pathname if status is AE_OK
*
diff --git a/drivers/acpi/acpica/nsobject.c b/drivers/acpi/acpica/nsobject.c
index dd77a3c..d6c9a3c 100644
--- a/drivers/acpi/acpica/nsobject.c
+++ b/drivers/acpi/acpica/nsobject.c
@@ -53,9 +53,9 @@ ACPI_MODULE_NAME("nsobject")
*
* FUNCTION: acpi_ns_attach_object
*
- * PARAMETERS: Node - Parent Node
- * Object - Object to be attached
- * Type - Type of object, or ACPI_TYPE_ANY if not
+ * PARAMETERS: node - Parent Node
+ * object - Object to be attached
+ * type - Type of object, or ACPI_TYPE_ANY if not
* known
*
* RETURN: Status
@@ -191,7 +191,7 @@ acpi_ns_attach_object(struct acpi_namespace_node *node,
*
* FUNCTION: acpi_ns_detach_object
*
- * PARAMETERS: Node - A Namespace node whose object will be detached
+ * PARAMETERS: node - A Namespace node whose object will be detached
*
* RETURN: None.
*
@@ -250,7 +250,7 @@ void acpi_ns_detach_object(struct acpi_namespace_node *node)
*
* FUNCTION: acpi_ns_get_attached_object
*
- * PARAMETERS: Node - Namespace node
+ * PARAMETERS: node - Namespace node
*
* RETURN: Current value of the object field from the Node whose
* handle is passed
@@ -285,7 +285,7 @@ union acpi_operand_object *acpi_ns_get_attached_object(struct
*
* FUNCTION: acpi_ns_get_secondary_object
*
- * PARAMETERS: Node - Namespace node
+ * PARAMETERS: node - Namespace node
*
* RETURN: Current value of the object field from the Node whose
* handle is passed.
@@ -315,9 +315,9 @@ union acpi_operand_object *acpi_ns_get_secondary_object(union
*
* FUNCTION: acpi_ns_attach_data
*
- * PARAMETERS: Node - Namespace node
- * Handler - Handler to be associated with the data
- * Data - Data to be attached
+ * PARAMETERS: node - Namespace node
+ * handler - Handler to be associated with the data
+ * data - Data to be attached
*
* RETURN: Status
*
@@ -372,8 +372,8 @@ acpi_ns_attach_data(struct acpi_namespace_node *node,
*
* FUNCTION: acpi_ns_detach_data
*
- * PARAMETERS: Node - Namespace node
- * Handler - Handler associated with the data
+ * PARAMETERS: node - Namespace node
+ * handler - Handler associated with the data
*
* RETURN: Status
*
@@ -416,9 +416,9 @@ acpi_ns_detach_data(struct acpi_namespace_node * node,
*
* FUNCTION: acpi_ns_get_attached_data
*
- * PARAMETERS: Node - Namespace node
- * Handler - Handler associated with the data
- * Data - Where the data is returned
+ * PARAMETERS: node - Namespace node
+ * handler - Handler associated with the data
+ * data - Where the data is returned
*
* RETURN: Status
*
diff --git a/drivers/acpi/acpica/nspredef.c b/drivers/acpi/acpica/nspredef.c
index 23ce096..10b85ae 100644
--- a/drivers/acpi/acpica/nspredef.c
+++ b/drivers/acpi/acpica/nspredef.c
@@ -116,7 +116,7 @@ static const char *acpi_rtype_names[] = {
*
* FUNCTION: acpi_ns_check_predefined_names
*
- * PARAMETERS: Node - Namespace node for the method/object
+ * PARAMETERS: node - Namespace node for the method/object
* user_param_count - Number of parameters actually passed
* return_status - Status from the object evaluation
* return_object_ptr - Pointer to the object returned from the
@@ -275,10 +275,10 @@ cleanup:
*
* FUNCTION: acpi_ns_check_parameter_count
*
- * PARAMETERS: Pathname - Full pathname to the node (for error msgs)
- * Node - Namespace node for the method/object
+ * PARAMETERS: pathname - Full pathname to the node (for error msgs)
+ * node - Namespace node for the method/object
* user_param_count - Number of args passed in by the caller
- * Predefined - Pointer to entry in predefined name table
+ * predefined - Pointer to entry in predefined name table
*
* RETURN: None
*
@@ -364,7 +364,7 @@ acpi_ns_check_parameter_count(char *pathname,
*
* FUNCTION: acpi_ns_check_for_predefined_name
*
- * PARAMETERS: Node - Namespace node for the method/object
+ * PARAMETERS: node - Namespace node for the method/object
*
* RETURN: Pointer to entry in predefined table. NULL indicates not found.
*
@@ -410,7 +410,7 @@ const union acpi_predefined_info *acpi_ns_check_for_predefined_name(struct
*
* FUNCTION: acpi_ns_check_package
*
- * PARAMETERS: Data - Pointer to validation data structure
+ * PARAMETERS: data - Pointer to validation data structure
* return_object_ptr - Pointer to the object returned from the
* evaluation of a method or object
*
@@ -685,11 +685,11 @@ package_too_small:
*
* FUNCTION: acpi_ns_check_package_list
*
- * PARAMETERS: Data - Pointer to validation data structure
- * Package - Pointer to package-specific info for method
- * Elements - Element list of parent package. All elements
+ * PARAMETERS: data - Pointer to validation data structure
+ * package - Pointer to package-specific info for method
+ * elements - Element list of parent package. All elements
* of this list should be of type Package.
- * Count - Count of subpackages
+ * count - Count of subpackages
*
* RETURN: Status
*
@@ -911,12 +911,12 @@ package_too_small:
*
* FUNCTION: acpi_ns_check_package_elements
*
- * PARAMETERS: Data - Pointer to validation data structure
- * Elements - Pointer to the package elements array
- * Type1 - Object type for first group
- * Count1 - Count for first group
- * Type2 - Object type for second group
- * Count2 - Count for second group
+ * PARAMETERS: data - Pointer to validation data structure
+ * elements - Pointer to the package elements array
+ * type1 - Object type for first group
+ * count1 - Count for first group
+ * type2 - Object type for second group
+ * count2 - Count for second group
* start_index - Start of the first group of elements
*
* RETURN: Status
@@ -968,7 +968,7 @@ acpi_ns_check_package_elements(struct acpi_predefined_data *data,
*
* FUNCTION: acpi_ns_check_object_type
*
- * PARAMETERS: Data - Pointer to validation data structure
+ * PARAMETERS: data - Pointer to validation data structure
* return_object_ptr - Pointer to the object returned from the
* evaluation of a method or object
* expected_btypes - Bitmap of expected return type(s)
@@ -1102,7 +1102,7 @@ acpi_ns_check_object_type(struct acpi_predefined_data *data,
*
* FUNCTION: acpi_ns_check_reference
*
- * PARAMETERS: Data - Pointer to validation data structure
+ * PARAMETERS: data - Pointer to validation data structure
* return_object - Object returned from the evaluation of a
* method or object
*
@@ -1140,7 +1140,7 @@ acpi_ns_check_reference(struct acpi_predefined_data *data,
*
* FUNCTION: acpi_ns_get_expected_types
*
- * PARAMETERS: Buffer - Pointer to where the string is returned
+ * PARAMETERS: buffer - Pointer to where the string is returned
* expected_btypes - Bitmap of expected return type(s)
*
* RETURN: Buffer is populated with type names.
diff --git a/drivers/acpi/acpica/nsrepair.c b/drivers/acpi/acpica/nsrepair.c
index 5519a64..8c5f292 100644
--- a/drivers/acpi/acpica/nsrepair.c
+++ b/drivers/acpi/acpica/nsrepair.c
@@ -94,7 +94,7 @@ acpi_ns_convert_to_buffer(union acpi_operand_object *original_object,
*
* FUNCTION: acpi_ns_repair_object
*
- * PARAMETERS: Data - Pointer to validation data structure
+ * PARAMETERS: data - Pointer to validation data structure
* expected_btypes - Object types expected
* package_index - Index of object within parent package (if
* applicable - ACPI_NOT_PACKAGE_ELEMENT
@@ -470,7 +470,7 @@ acpi_ns_convert_to_buffer(union acpi_operand_object *original_object,
*
* FUNCTION: acpi_ns_repair_null_element
*
- * PARAMETERS: Data - Pointer to validation data structure
+ * PARAMETERS: data - Pointer to validation data structure
* expected_btypes - Object types expected
* package_index - Index of object within parent package (if
* applicable - ACPI_NOT_PACKAGE_ELEMENT
@@ -509,17 +509,17 @@ acpi_ns_repair_null_element(struct acpi_predefined_data *data,
*/
if (expected_btypes & ACPI_RTYPE_INTEGER) {
- /* Need an Integer - create a zero-value integer */
+ /* Need an integer - create a zero-value integer */
new_object = acpi_ut_create_integer_object((u64)0);
} else if (expected_btypes & ACPI_RTYPE_STRING) {
- /* Need a String - create a NULL string */
+ /* Need a string - create a NULL string */
new_object = acpi_ut_create_string_object(0);
} else if (expected_btypes & ACPI_RTYPE_BUFFER) {
- /* Need a Buffer - create a zero-length buffer */
+ /* Need a buffer - create a zero-length buffer */
new_object = acpi_ut_create_buffer_object(0);
} else {
@@ -552,7 +552,7 @@ acpi_ns_repair_null_element(struct acpi_predefined_data *data,
*
* FUNCTION: acpi_ns_remove_null_elements
*
- * PARAMETERS: Data - Pointer to validation data structure
+ * PARAMETERS: data - Pointer to validation data structure
* package_type - An acpi_return_package_types value
* obj_desc - A Package object
*
@@ -635,7 +635,7 @@ acpi_ns_remove_null_elements(struct acpi_predefined_data *data,
*
* FUNCTION: acpi_ns_wrap_with_package
*
- * PARAMETERS: Data - Pointer to validation data structure
+ * PARAMETERS: data - Pointer to validation data structure
* original_object - Pointer to the object to repair.
* obj_desc_ptr - The new package object is returned here
*
diff --git a/drivers/acpi/acpica/nsrepair2.c b/drivers/acpi/acpica/nsrepair2.c
index 726bc8e..9018925 100644
--- a/drivers/acpi/acpica/nsrepair2.c
+++ b/drivers/acpi/acpica/nsrepair2.c
@@ -149,8 +149,8 @@ static const struct acpi_repair_info acpi_ns_repairable_names[] = {
*
* FUNCTION: acpi_ns_complex_repairs
*
- * PARAMETERS: Data - Pointer to validation data structure
- * Node - Namespace node for the method/object
+ * PARAMETERS: data - Pointer to validation data structure
+ * node - Namespace node for the method/object
* validate_status - Original status of earlier validation
* return_object_ptr - Pointer to the object returned from the
* evaluation of a method or object
@@ -187,7 +187,7 @@ acpi_ns_complex_repairs(struct acpi_predefined_data *data,
*
* FUNCTION: acpi_ns_match_repairable_name
*
- * PARAMETERS: Node - Namespace node for the method/object
+ * PARAMETERS: node - Namespace node for the method/object
*
* RETURN: Pointer to entry in repair table. NULL indicates not found.
*
@@ -218,7 +218,7 @@ static const struct acpi_repair_info *acpi_ns_match_repairable_name(struct
*
* FUNCTION: acpi_ns_repair_ALR
*
- * PARAMETERS: Data - Pointer to validation data structure
+ * PARAMETERS: data - Pointer to validation data structure
* return_object_ptr - Pointer to the object returned from the
* evaluation of a method or object
*
@@ -247,7 +247,7 @@ acpi_ns_repair_ALR(struct acpi_predefined_data *data,
*
* FUNCTION: acpi_ns_repair_FDE
*
- * PARAMETERS: Data - Pointer to validation data structure
+ * PARAMETERS: data - Pointer to validation data structure
* return_object_ptr - Pointer to the object returned from the
* evaluation of a method or object
*
@@ -335,7 +335,7 @@ acpi_ns_repair_FDE(struct acpi_predefined_data *data,
*
* FUNCTION: acpi_ns_repair_CID
*
- * PARAMETERS: Data - Pointer to validation data structure
+ * PARAMETERS: data - Pointer to validation data structure
* return_object_ptr - Pointer to the object returned from the
* evaluation of a method or object
*
@@ -405,7 +405,7 @@ acpi_ns_repair_CID(struct acpi_predefined_data *data,
*
* FUNCTION: acpi_ns_repair_HID
*
- * PARAMETERS: Data - Pointer to validation data structure
+ * PARAMETERS: data - Pointer to validation data structure
* return_object_ptr - Pointer to the object returned from the
* evaluation of a method or object
*
@@ -487,7 +487,7 @@ acpi_ns_repair_HID(struct acpi_predefined_data *data,
*
* FUNCTION: acpi_ns_repair_TSS
*
- * PARAMETERS: Data - Pointer to validation data structure
+ * PARAMETERS: data - Pointer to validation data structure
* return_object_ptr - Pointer to the object returned from the
* evaluation of a method or object
*
@@ -531,7 +531,7 @@ acpi_ns_repair_TSS(struct acpi_predefined_data *data,
*
* FUNCTION: acpi_ns_repair_PSS
*
- * PARAMETERS: Data - Pointer to validation data structure
+ * PARAMETERS: data - Pointer to validation data structure
* return_object_ptr - Pointer to the object returned from the
* evaluation of a method or object
*
@@ -600,7 +600,7 @@ acpi_ns_repair_PSS(struct acpi_predefined_data *data,
*
* FUNCTION: acpi_ns_check_sorted_list
*
- * PARAMETERS: Data - Pointer to validation data structure
+ * PARAMETERS: data - Pointer to validation data structure
* return_object - Pointer to the top-level returned object
* expected_count - Minimum length of each sub-package
* sort_index - Sub-package entry to sort on
@@ -707,9 +707,9 @@ acpi_ns_check_sorted_list(struct acpi_predefined_data *data,
*
* FUNCTION: acpi_ns_sort_list
*
- * PARAMETERS: Elements - Package object element list
- * Count - Element count for above
- * Index - Sort by which package element
+ * PARAMETERS: elements - Package object element list
+ * count - Element count for above
+ * index - Sort by which package element
* sort_direction - Ascending or Descending sort
*
* RETURN: None
diff --git a/drivers/acpi/acpica/nssearch.c b/drivers/acpi/acpica/nssearch.c
index 507043d..456cc85 100644
--- a/drivers/acpi/acpica/nssearch.c
+++ b/drivers/acpi/acpica/nssearch.c
@@ -65,7 +65,7 @@ acpi_ns_search_parent_tree(u32 target_name,
*
* PARAMETERS: target_name - Ascii ACPI name to search for
* parent_node - Starting node where search will begin
- * Type - Object type to match
+ * type - Object type to match
* return_node - Where the matched Named obj is returned
*
* RETURN: Status
@@ -175,8 +175,8 @@ acpi_ns_search_one_scope(u32 target_name,
* FUNCTION: acpi_ns_search_parent_tree
*
* PARAMETERS: target_name - Ascii ACPI name to search for
- * Node - Starting node where search will begin
- * Type - Object type to match
+ * node - Starting node where search will begin
+ * type - Object type to match
* return_node - Where the matched Node is returned
*
* RETURN: Status
@@ -264,11 +264,11 @@ acpi_ns_search_parent_tree(u32 target_name,
*
* PARAMETERS: target_name - Ascii ACPI name to search for (4 chars)
* walk_state - Current state of the walk
- * Node - Starting node where search will begin
+ * node - Starting node where search will begin
* interpreter_mode - Add names only in ACPI_MODE_LOAD_PASS_x.
* Otherwise,search only.
- * Type - Object type to match
- * Flags - Flags describing the search restrictions
+ * type - Object type to match
+ * flags - Flags describing the search restrictions
* return_node - Where the Node is returned
*
* RETURN: Status
diff --git a/drivers/acpi/acpica/nsutils.c b/drivers/acpi/acpica/nsutils.c
index 7511375..ef753a4 100644
--- a/drivers/acpi/acpica/nsutils.c
+++ b/drivers/acpi/acpica/nsutils.c
@@ -62,8 +62,8 @@ acpi_name acpi_ns_find_parent_name(struct acpi_namespace_node *node_to_search);
*
* FUNCTION: acpi_ns_print_node_pathname
*
- * PARAMETERS: Node - Object
- * Message - Prefix message
+ * PARAMETERS: node - Object
+ * message - Prefix message
*
* DESCRIPTION: Print an object's full namespace pathname
* Manages allocation/freeing of a pathname buffer
@@ -101,7 +101,7 @@ acpi_ns_print_node_pathname(struct acpi_namespace_node *node,
*
* FUNCTION: acpi_ns_valid_root_prefix
*
- * PARAMETERS: Prefix - Character to be checked
+ * PARAMETERS: prefix - Character to be checked
*
* RETURN: TRUE if a valid prefix
*
@@ -119,7 +119,7 @@ u8 acpi_ns_valid_root_prefix(char prefix)
*
* FUNCTION: acpi_ns_valid_path_separator
*
- * PARAMETERS: Sep - Character to be checked
+ * PARAMETERS: sep - Character to be checked
*
* RETURN: TRUE if a valid path separator
*
@@ -137,7 +137,7 @@ static u8 acpi_ns_valid_path_separator(char sep)
*
* FUNCTION: acpi_ns_get_type
*
- * PARAMETERS: Node - Parent Node to be examined
+ * PARAMETERS: node - Parent Node to be examined
*
* RETURN: Type field from Node whose handle is passed
*
@@ -161,7 +161,7 @@ acpi_object_type acpi_ns_get_type(struct acpi_namespace_node * node)
*
* FUNCTION: acpi_ns_local
*
- * PARAMETERS: Type - A namespace object type
+ * PARAMETERS: type - A namespace object type
*
* RETURN: LOCAL if names must be found locally in objects of the
* passed type, 0 if enclosing scopes should be searched
@@ -189,7 +189,7 @@ u32 acpi_ns_local(acpi_object_type type)
*
* FUNCTION: acpi_ns_get_internal_name_length
*
- * PARAMETERS: Info - Info struct initialized with the
+ * PARAMETERS: info - Info struct initialized with the
* external name pointer.
*
* RETURN: None
@@ -260,7 +260,7 @@ void acpi_ns_get_internal_name_length(struct acpi_namestring_info *info)
*
* FUNCTION: acpi_ns_build_internal_name
*
- * PARAMETERS: Info - Info struct fully initialized
+ * PARAMETERS: info - Info struct fully initialized
*
* RETURN: Status
*
@@ -371,7 +371,7 @@ acpi_status acpi_ns_build_internal_name(struct acpi_namestring_info *info)
* FUNCTION: acpi_ns_internalize_name
*
* PARAMETERS: *external_name - External representation of name
- * **Converted Name - Where to return the resulting
+ * **Converted name - Where to return the resulting
* internal represention of the name
*
* RETURN: Status
@@ -575,7 +575,7 @@ acpi_ns_externalize_name(u32 internal_name_length,
*
* FUNCTION: acpi_ns_validate_handle
*
- * PARAMETERS: Handle - Handle to be validated and typecast to a
+ * PARAMETERS: handle - Handle to be validated and typecast to a
* namespace node.
*
* RETURN: A pointer to a namespace node
@@ -651,7 +651,7 @@ void acpi_ns_terminate(void)
*
* FUNCTION: acpi_ns_opens_scope
*
- * PARAMETERS: Type - A valid namespace type
+ * PARAMETERS: type - A valid namespace type
*
* RETURN: NEWSCOPE if the passed type "opens a name scope" according
* to the ACPI specification, else 0
@@ -677,14 +677,14 @@ u32 acpi_ns_opens_scope(acpi_object_type type)
*
* FUNCTION: acpi_ns_get_node
*
- * PARAMETERS: *Pathname - Name to be found, in external (ASL) format. The
+ * PARAMETERS: *pathname - Name to be found, in external (ASL) format. The
* \ (backslash) and ^ (carat) prefixes, and the
* . (period) to separate segments are supported.
* prefix_node - Root of subtree to be searched, or NS_ALL for the
* root of the name space. If Name is fully
* qualified (first s8 is '\'), the passed value
* of Scope will not be accessed.
- * Flags - Used to indicate whether to perform upsearch or
+ * flags - Used to indicate whether to perform upsearch or
* not.
* return_node - Where the Node is returned
*
diff --git a/drivers/acpi/acpica/nswalk.c b/drivers/acpi/acpica/nswalk.c
index f69895a..730bccc 100644
--- a/drivers/acpi/acpica/nswalk.c
+++ b/drivers/acpi/acpica/nswalk.c
@@ -88,7 +88,7 @@ struct acpi_namespace_node *acpi_ns_get_next_node(struct acpi_namespace_node
*
* FUNCTION: acpi_ns_get_next_node_typed
*
- * PARAMETERS: Type - Type of node to be searched for
+ * PARAMETERS: type - Type of node to be searched for
* parent_node - Parent node whose children we are
* getting
* child_node - Previous child that was found.
@@ -151,16 +151,16 @@ struct acpi_namespace_node *acpi_ns_get_next_node_typed(acpi_object_type type,
*
* FUNCTION: acpi_ns_walk_namespace
*
- * PARAMETERS: Type - acpi_object_type to search for
+ * PARAMETERS: type - acpi_object_type to search for
* start_node - Handle in namespace where search begins
* max_depth - Depth to which search is to reach
- * Flags - Whether to unlock the NS before invoking
+ * flags - Whether to unlock the NS before invoking
* the callback routine
* pre_order_visit - Called during tree pre-order visit
* when an object of "Type" is found
* post_order_visit - Called during tree post-order visit
* when an object of "Type" is found
- * Context - Passed to user function(s) above
+ * context - Passed to user function(s) above
* return_value - from the user_function if terminated
* early. Otherwise, returns NULL.
* RETURNS: Status
diff --git a/drivers/acpi/acpica/nsxfeval.c b/drivers/acpi/acpica/nsxfeval.c
index 71d15f6..9692e67 100644
--- a/drivers/acpi/acpica/nsxfeval.c
+++ b/drivers/acpi/acpica/nsxfeval.c
@@ -58,8 +58,8 @@ static void acpi_ns_resolve_references(struct acpi_evaluate_info *info);
*
* FUNCTION: acpi_evaluate_object_typed
*
- * PARAMETERS: Handle - Object handle (optional)
- * Pathname - Object pathname (optional)
+ * PARAMETERS: handle - Object handle (optional)
+ * pathname - Object pathname (optional)
* external_params - List of parameters to pass to method,
* terminated by NULL. May be NULL
* if no parameters are being passed.
@@ -152,8 +152,8 @@ ACPI_EXPORT_SYMBOL(acpi_evaluate_object_typed)
*
* FUNCTION: acpi_evaluate_object
*
- * PARAMETERS: Handle - Object handle (optional)
- * Pathname - Object pathname (optional)
+ * PARAMETERS: handle - Object handle (optional)
+ * pathname - Object pathname (optional)
* external_params - List of parameters to pass to method,
* terminated by NULL. May be NULL
* if no parameters are being passed.
@@ -364,7 +364,7 @@ ACPI_EXPORT_SYMBOL(acpi_evaluate_object)
*
* FUNCTION: acpi_ns_resolve_references
*
- * PARAMETERS: Info - Evaluation info block
+ * PARAMETERS: info - Evaluation info block
*
* RETURN: Info->return_object is replaced with the dereferenced object
*
@@ -431,14 +431,14 @@ static void acpi_ns_resolve_references(struct acpi_evaluate_info *info)
*
* FUNCTION: acpi_walk_namespace
*
- * PARAMETERS: Type - acpi_object_type to search for
+ * PARAMETERS: type - acpi_object_type to search for
* start_object - Handle in namespace where search begins
* max_depth - Depth to which search is to reach
* pre_order_visit - Called during tree pre-order visit
* when an object of "Type" is found
* post_order_visit - Called during tree post-order visit
* when an object of "Type" is found
- * Context - Passed to user function(s) above
+ * context - Passed to user function(s) above
* return_value - Location where return value of
* user_function is put if terminated early
*
@@ -646,7 +646,7 @@ acpi_ns_get_device_callback(acpi_handle obj_handle,
*
* PARAMETERS: HID - HID to search for. Can be NULL.
* user_function - Called when a matching object is found
- * Context - Passed to user function
+ * context - Passed to user function
* return_value - Location where return value of
* user_function is put if terminated early
*
@@ -716,8 +716,8 @@ ACPI_EXPORT_SYMBOL(acpi_get_devices)
* FUNCTION: acpi_attach_data
*
* PARAMETERS: obj_handle - Namespace node
- * Handler - Handler for this attachment
- * Data - Pointer to data to be attached
+ * handler - Handler for this attachment
+ * data - Pointer to data to be attached
*
* RETURN: Status
*
@@ -764,7 +764,7 @@ ACPI_EXPORT_SYMBOL(acpi_attach_data)
* FUNCTION: acpi_detach_data
*
* PARAMETERS: obj_handle - Namespace node handle
- * Handler - Handler used in call to acpi_attach_data
+ * handler - Handler used in call to acpi_attach_data
*
* RETURN: Status
*
@@ -810,8 +810,8 @@ ACPI_EXPORT_SYMBOL(acpi_detach_data)
* FUNCTION: acpi_get_data
*
* PARAMETERS: obj_handle - Namespace node
- * Handler - Handler used in call to attach_data
- * Data - Where the data is returned
+ * handler - Handler used in call to attach_data
+ * data - Where the data is returned
*
* RETURN: Status
*
diff --git a/drivers/acpi/acpica/nsxfname.c b/drivers/acpi/acpica/nsxfname.c
index af401c9..08e9610 100644
--- a/drivers/acpi/acpica/nsxfname.c
+++ b/drivers/acpi/acpica/nsxfname.c
@@ -61,8 +61,8 @@ static char *acpi_ns_copy_device_id(struct acpica_device_id *dest,
*
* FUNCTION: acpi_get_handle
*
- * PARAMETERS: Parent - Object to search under (search scope).
- * Pathname - Pointer to an asciiz string containing the
+ * PARAMETERS: parent - Object to search under (search scope).
+ * pathname - Pointer to an asciiz string containing the
* name
* ret_handle - Where the return handle is returned
*
@@ -142,9 +142,9 @@ ACPI_EXPORT_SYMBOL(acpi_get_handle)
*
* FUNCTION: acpi_get_name
*
- * PARAMETERS: Handle - Handle to be converted to a pathname
+ * PARAMETERS: handle - Handle to be converted to a pathname
* name_type - Full pathname or single segment
- * Buffer - Buffer for returned path
+ * buffer - Buffer for returned path
*
* RETURN: Pointer to a string containing the fully qualified Name.
*
@@ -219,8 +219,8 @@ ACPI_EXPORT_SYMBOL(acpi_get_name)
*
* FUNCTION: acpi_ns_copy_device_id
*
- * PARAMETERS: Dest - Pointer to the destination DEVICE_ID
- * Source - Pointer to the source DEVICE_ID
+ * PARAMETERS: dest - Pointer to the destination DEVICE_ID
+ * source - Pointer to the source DEVICE_ID
* string_area - Pointer to where to copy the dest string
*
* RETURN: Pointer to the next string area
@@ -247,7 +247,7 @@ static char *acpi_ns_copy_device_id(struct acpica_device_id *dest,
*
* FUNCTION: acpi_get_object_info
*
- * PARAMETERS: Handle - Object Handle
+ * PARAMETERS: handle - Object Handle
* return_buffer - Where the info is returned
*
* RETURN: Status
@@ -493,7 +493,7 @@ ACPI_EXPORT_SYMBOL(acpi_get_object_info)
*
* FUNCTION: acpi_install_method
*
- * PARAMETERS: Buffer - An ACPI table containing one control method
+ * PARAMETERS: buffer - An ACPI table containing one control method
*
* RETURN: Status
*
diff --git a/drivers/acpi/acpica/nsxfobj.c b/drivers/acpi/acpica/nsxfobj.c
index 880a605..6766fc4 100644
--- a/drivers/acpi/acpica/nsxfobj.c
+++ b/drivers/acpi/acpica/nsxfobj.c
@@ -98,7 +98,7 @@ ACPI_EXPORT_SYMBOL(acpi_get_id)
*
* FUNCTION: acpi_get_type
*
- * PARAMETERS: Handle - Handle of object whose type is desired
+ * PARAMETERS: handle - Handle of object whose type is desired
* ret_type - Where the type will be placed
*
* RETURN: Status
@@ -151,7 +151,7 @@ ACPI_EXPORT_SYMBOL(acpi_get_type)
*
* FUNCTION: acpi_get_parent
*
- * PARAMETERS: Handle - Handle of object whose parent is desired
+ * PARAMETERS: handle - Handle of object whose parent is desired
* ret_handle - Where the parent handle will be placed
*
* RETURN: Status
@@ -212,8 +212,8 @@ ACPI_EXPORT_SYMBOL(acpi_get_parent)
*
* FUNCTION: acpi_get_next_object
*
- * PARAMETERS: Type - Type of object to be searched for
- * Parent - Parent object whose children we are getting
+ * PARAMETERS: type - Type of object to be searched for
+ * parent - Parent object whose children we are getting
* last_child - Previous child that was found.
* The NEXT child will be returned
* ret_handle - Where handle to the next object is placed
diff --git a/drivers/acpi/acpica/psargs.c b/drivers/acpi/acpica/psargs.c
index a683d66..844464c 100644
--- a/drivers/acpi/acpica/psargs.c
+++ b/drivers/acpi/acpica/psargs.c
@@ -210,7 +210,7 @@ char *acpi_ps_get_next_namestring(struct acpi_parse_state *parser_state)
* FUNCTION: acpi_ps_get_next_namepath
*
* PARAMETERS: parser_state - Current parser state object
- * Arg - Where the namepath will be stored
+ * arg - Where the namepath will be stored
* arg_count - If the namepath points to a control method
* the method's argument is returned here.
* possible_method_call - Whether the namepath can possibly be the
@@ -379,7 +379,7 @@ acpi_ps_get_next_namepath(struct acpi_walk_state *walk_state,
*
* PARAMETERS: parser_state - Current parser state object
* arg_type - The argument type (AML_*_ARG)
- * Arg - Where the argument is returned
+ * arg - Where the argument is returned
*
* RETURN: None
*
diff --git a/drivers/acpi/acpica/psloop.c b/drivers/acpi/acpica/psloop.c
index 9547ad8..799162c 100644
--- a/drivers/acpi/acpica/psloop.c
+++ b/drivers/acpi/acpica/psloop.c
@@ -167,7 +167,7 @@ static acpi_status acpi_ps_get_aml_opcode(struct acpi_walk_state *walk_state)
* PARAMETERS: walk_state - Current state
* aml_op_start - Begin of named Op in AML
* unnamed_op - Early Op (not a named Op)
- * Op - Returned Op
+ * op - Returned Op
*
* RETURN: Status
*
@@ -323,7 +323,7 @@ acpi_ps_create_op(struct acpi_walk_state *walk_state,
if (walk_state->op_info->flags & AML_CREATE) {
/*
- * Backup to beginning of create_xXXfield declaration
+ * Backup to beginning of create_XXXfield declaration
* body_length is unknown until we parse the body
*/
op->named.data = aml_op_start;
@@ -380,7 +380,7 @@ acpi_ps_create_op(struct acpi_walk_state *walk_state,
*
* PARAMETERS: walk_state - Current state
* aml_op_start - Op start in AML
- * Op - Current Op
+ * op - Current Op
*
* RETURN: Status
*
@@ -679,8 +679,8 @@ acpi_ps_link_module_code(union acpi_parse_object *parent_op,
* FUNCTION: acpi_ps_complete_op
*
* PARAMETERS: walk_state - Current state
- * Op - Returned Op
- * Status - Parse status before complete Op
+ * op - Returned Op
+ * status - Parse status before complete Op
*
* RETURN: Status
*
@@ -853,8 +853,8 @@ acpi_ps_complete_op(struct acpi_walk_state *walk_state,
* FUNCTION: acpi_ps_complete_final_op
*
* PARAMETERS: walk_state - Current state
- * Op - Current Op
- * Status - Current parse status before complete last
+ * op - Current Op
+ * status - Current parse status before complete last
* Op
*
* RETURN: Status
@@ -1165,7 +1165,7 @@ acpi_status acpi_ps_parse_loop(struct acpi_walk_state *walk_state)
if (walk_state->op_info->flags & AML_CREATE) {
/*
- * Backup to beginning of create_xXXfield declaration (1 for
+ * Backup to beginning of create_XXXfield declaration (1 for
* Opcode)
*
* body_length is unknown until we parse the body
diff --git a/drivers/acpi/acpica/psopcode.c b/drivers/acpi/acpica/psopcode.c
index a0226fd..ed1d457 100644
--- a/drivers/acpi/acpica/psopcode.c
+++ b/drivers/acpi/acpica/psopcode.c
@@ -724,7 +724,7 @@ static const u8 acpi_gbl_long_op_index[NUM_EXTENDED_OPCODE] = {
*
* FUNCTION: acpi_ps_get_opcode_info
*
- * PARAMETERS: Opcode - The AML opcode
+ * PARAMETERS: opcode - The AML opcode
*
* RETURN: A pointer to the info about the opcode.
*
@@ -769,7 +769,7 @@ const struct acpi_opcode_info *acpi_ps_get_opcode_info(u16 opcode)
*
* FUNCTION: acpi_ps_get_opcode_name
*
- * PARAMETERS: Opcode - The AML opcode
+ * PARAMETERS: opcode - The AML opcode
*
* RETURN: A pointer to the name of the opcode (ASCII String)
* Note: Never returns NULL.
diff --git a/drivers/acpi/acpica/psparse.c b/drivers/acpi/acpica/psparse.c
index 2ff9c35..0198570 100644
--- a/drivers/acpi/acpica/psparse.c
+++ b/drivers/acpi/acpica/psparse.c
@@ -64,7 +64,7 @@ ACPI_MODULE_NAME("psparse")
*
* FUNCTION: acpi_ps_get_opcode_size
*
- * PARAMETERS: Opcode - An AML opcode
+ * PARAMETERS: opcode - An AML opcode
*
* RETURN: Size of the opcode, in bytes (1 or 2)
*
@@ -121,7 +121,7 @@ u16 acpi_ps_peek_opcode(struct acpi_parse_state * parser_state)
* FUNCTION: acpi_ps_complete_this_op
*
* PARAMETERS: walk_state - Current State
- * Op - Op to complete
+ * op - Op to complete
*
* RETURN: Status
*
@@ -311,7 +311,7 @@ acpi_ps_complete_this_op(struct acpi_walk_state * walk_state,
* FUNCTION: acpi_ps_next_parse_state
*
* PARAMETERS: walk_state - Current state
- * Op - Current parse op
+ * op - Current parse op
* callback_status - Status from previous operation
*
* RETURN: Status
diff --git a/drivers/acpi/acpica/psscope.c b/drivers/acpi/acpica/psscope.c
index c872aa4..608dc20 100644
--- a/drivers/acpi/acpica/psscope.c
+++ b/drivers/acpi/acpica/psscope.c
@@ -93,7 +93,7 @@ u8 acpi_ps_has_completed_scope(struct acpi_parse_state * parser_state)
* FUNCTION: acpi_ps_init_scope
*
* PARAMETERS: parser_state - Current parser state object
- * Root - the Root Node of this new scope
+ * root - the Root Node of this new scope
*
* RETURN: Status
*
@@ -131,7 +131,7 @@ acpi_ps_init_scope(struct acpi_parse_state * parser_state,
* FUNCTION: acpi_ps_push_scope
*
* PARAMETERS: parser_state - Current parser state object
- * Op - Current op to be pushed
+ * op - Current op to be pushed
* remaining_args - List of args remaining
* arg_count - Fixed or variable number of args
*
@@ -184,7 +184,7 @@ acpi_ps_push_scope(struct acpi_parse_state *parser_state,
* FUNCTION: acpi_ps_pop_scope
*
* PARAMETERS: parser_state - Current parser state object
- * Op - Where the popped op is returned
+ * op - Where the popped op is returned
* arg_list - Where the popped "next argument" is
* returned
* arg_count - Count of objects in arg_list
diff --git a/drivers/acpi/acpica/pstree.c b/drivers/acpi/acpica/pstree.c
index 2b03cdb..fdb2e71 100644
--- a/drivers/acpi/acpica/pstree.c
+++ b/drivers/acpi/acpica/pstree.c
@@ -58,8 +58,8 @@ union acpi_parse_object *acpi_ps_get_child(union acpi_parse_object *op);
*
* FUNCTION: acpi_ps_get_arg
*
- * PARAMETERS: Op - Get an argument for this op
- * Argn - Nth argument to get
+ * PARAMETERS: op - Get an argument for this op
+ * argn - Nth argument to get
*
* RETURN: The argument (as an Op object). NULL if argument does not exist
*
@@ -114,8 +114,8 @@ union acpi_parse_object *acpi_ps_get_arg(union acpi_parse_object *op, u32 argn)
*
* FUNCTION: acpi_ps_append_arg
*
- * PARAMETERS: Op - Append an argument to this Op.
- * Arg - Argument Op to append
+ * PARAMETERS: op - Append an argument to this Op.
+ * arg - Argument Op to append
*
* RETURN: None.
*
@@ -188,8 +188,8 @@ acpi_ps_append_arg(union acpi_parse_object *op, union acpi_parse_object *arg)
*
* FUNCTION: acpi_ps_get_depth_next
*
- * PARAMETERS: Origin - Root of subtree to search
- * Op - Last (previous) Op that was found
+ * PARAMETERS: origin - Root of subtree to search
+ * op - Last (previous) Op that was found
*
* RETURN: Next Op found in the search.
*
@@ -261,7 +261,7 @@ union acpi_parse_object *acpi_ps_get_depth_next(union acpi_parse_object *origin,
*
* FUNCTION: acpi_ps_get_child
*
- * PARAMETERS: Op - Get the child of this Op
+ * PARAMETERS: op - Get the child of this Op
*
* RETURN: Child Op, Null if none is found.
*
diff --git a/drivers/acpi/acpica/psutils.c b/drivers/acpi/acpica/psutils.c
index 13bb131..8736ad5 100644
--- a/drivers/acpi/acpica/psutils.c
+++ b/drivers/acpi/acpica/psutils.c
@@ -77,8 +77,8 @@ union acpi_parse_object *acpi_ps_create_scope_op(void)
*
* FUNCTION: acpi_ps_init_op
*
- * PARAMETERS: Op - A newly allocated Op object
- * Opcode - Opcode to store in the Op
+ * PARAMETERS: op - A newly allocated Op object
+ * opcode - Opcode to store in the Op
*
* RETURN: None
*
@@ -103,7 +103,7 @@ void acpi_ps_init_op(union acpi_parse_object *op, u16 opcode)
*
* FUNCTION: acpi_ps_alloc_op
*
- * PARAMETERS: Opcode - Opcode that will be stored in the new Op
+ * PARAMETERS: opcode - Opcode that will be stored in the new Op
*
* RETURN: Pointer to the new Op, null on failure
*
@@ -160,7 +160,7 @@ union acpi_parse_object *acpi_ps_alloc_op(u16 opcode)
*
* FUNCTION: acpi_ps_free_op
*
- * PARAMETERS: Op - Op to be freed
+ * PARAMETERS: op - Op to be freed
*
* RETURN: None.
*
diff --git a/drivers/acpi/acpica/psxface.c b/drivers/acpi/acpica/psxface.c
index 9d98c5f..963e162 100644
--- a/drivers/acpi/acpica/psxface.c
+++ b/drivers/acpi/acpica/psxface.c
@@ -66,7 +66,7 @@ acpi_ps_update_parameter_list(struct acpi_evaluate_info *info, u16 action);
* PARAMETERS: method_name - Valid ACPI name string
* debug_level - Optional level mask. 0 to use default
* debug_layer - Optional layer mask. 0 to use default
- * Flags - bit 1: one shot(1) or persistent(0)
+ * flags - bit 1: one shot(1) or persistent(0)
*
* RETURN: Status
*
@@ -105,7 +105,7 @@ acpi_debug_trace(char *name, u32 debug_level, u32 debug_layer, u32 flags)
*
* FUNCTION: acpi_ps_start_trace
*
- * PARAMETERS: Info - Method info struct
+ * PARAMETERS: info - Method info struct
*
* RETURN: None
*
@@ -150,7 +150,7 @@ static void acpi_ps_start_trace(struct acpi_evaluate_info *info)
*
* FUNCTION: acpi_ps_stop_trace
*
- * PARAMETERS: Info - Method info struct
+ * PARAMETERS: info - Method info struct
*
* RETURN: None
*
@@ -193,10 +193,10 @@ static void acpi_ps_stop_trace(struct acpi_evaluate_info *info)
*
* FUNCTION: acpi_ps_execute_method
*
- * PARAMETERS: Info - Method info block, contains:
- * Node - Method Node to execute
+ * PARAMETERS: info - Method info block, contains:
+ * node - Method Node to execute
* obj_desc - Method object
- * Parameters - List of parameters to pass to the method,
+ * parameters - List of parameters to pass to the method,
* terminated by NULL. Params itself may be
* NULL if no parameters are being passed.
* return_object - Where to put method's return value (if
@@ -361,9 +361,9 @@ acpi_status acpi_ps_execute_method(struct acpi_evaluate_info *info)
*
* FUNCTION: acpi_ps_update_parameter_list
*
- * PARAMETERS: Info - See struct acpi_evaluate_info
+ * PARAMETERS: info - See struct acpi_evaluate_info
* (Used: parameter_type and Parameters)
- * Action - Add or Remove reference
+ * action - Add or Remove reference
*
* RETURN: Status
*
diff --git a/drivers/acpi/acpica/rsaddr.c b/drivers/acpi/acpica/rsaddr.c
index a030565..856ff07 100644
--- a/drivers/acpi/acpica/rsaddr.c
+++ b/drivers/acpi/acpica/rsaddr.c
@@ -182,8 +182,8 @@ struct acpi_rsconvert_info acpi_rs_convert_ext_address64[5] = {
/* Revision ID */
- {ACPI_RSC_MOVE8, ACPI_RS_OFFSET(data.ext_address64.revision_iD),
- AML_OFFSET(ext_address64.revision_iD),
+ {ACPI_RSC_MOVE8, ACPI_RS_OFFSET(data.ext_address64.revision_ID),
+ AML_OFFSET(ext_address64.revision_ID),
1},
/*
* These fields are contiguous in both the source and destination:
@@ -215,7 +215,7 @@ static struct acpi_rsconvert_info acpi_rs_convert_general_flags[6] = {
AML_OFFSET(address.resource_type),
1},
- /* General Flags - Consume, Decode, min_fixed, max_fixed */
+ /* General flags - Consume, Decode, min_fixed, max_fixed */
{ACPI_RSC_1BITFLAG, ACPI_RS_OFFSET(data.address.producer_consumer),
AML_OFFSET(address.flags),
@@ -293,8 +293,8 @@ static struct acpi_rsconvert_info acpi_rs_convert_io_flags[4] = {
*
* FUNCTION: acpi_rs_get_address_common
*
- * PARAMETERS: Resource - Pointer to the internal resource struct
- * Aml - Pointer to the AML resource descriptor
+ * PARAMETERS: resource - Pointer to the internal resource struct
+ * aml - Pointer to the AML resource descriptor
*
* RETURN: TRUE if the resource_type field is OK, FALSE otherwise
*
@@ -343,8 +343,8 @@ acpi_rs_get_address_common(struct acpi_resource *resource,
*
* FUNCTION: acpi_rs_set_address_common
*
- * PARAMETERS: Aml - Pointer to the AML resource descriptor
- * Resource - Pointer to the internal resource struct
+ * PARAMETERS: aml - Pointer to the AML resource descriptor
+ * resource - Pointer to the internal resource struct
*
* RETURN: None
*
diff --git a/drivers/acpi/acpica/rscalc.c b/drivers/acpi/acpica/rscalc.c
index 3c6df4b..de12469 100644
--- a/drivers/acpi/acpica/rscalc.c
+++ b/drivers/acpi/acpica/rscalc.c
@@ -173,7 +173,7 @@ acpi_rs_stream_option_length(u32 resource_length,
*
* FUNCTION: acpi_rs_get_aml_length
*
- * PARAMETERS: Resource - Pointer to the resource linked list
+ * PARAMETERS: resource - Pointer to the resource linked list
* size_needed - Where the required size is returned
*
* RETURN: Status
diff --git a/drivers/acpi/acpica/rsdump.c b/drivers/acpi/acpica/rsdump.c
index b4c5811..4d11b072 100644
--- a/drivers/acpi/acpica/rsdump.c
+++ b/drivers/acpi/acpica/rsdump.c
@@ -703,7 +703,7 @@ acpi_rs_dump_resource_source(struct acpi_resource_source *resource_source)
*
* FUNCTION: acpi_rs_dump_address_common
*
- * PARAMETERS: Resource - Pointer to an internal resource descriptor
+ * PARAMETERS: resource - Pointer to an internal resource descriptor
*
* RETURN: None
*
@@ -850,8 +850,8 @@ void acpi_rs_dump_irq_list(u8 * route_table)
*
* FUNCTION: acpi_rs_out*
*
- * PARAMETERS: Title - Name of the resource field
- * Value - Value of the resource field
+ * PARAMETERS: title - Name of the resource field
+ * value - Value of the resource field
*
* RETURN: None
*
@@ -898,8 +898,8 @@ static void acpi_rs_out_title(char *title)
*
* FUNCTION: acpi_rs_dump*List
*
- * PARAMETERS: Length - Number of elements in the list
- * Data - Start of the list
+ * PARAMETERS: length - Number of elements in the list
+ * data - Start of the list
*
* RETURN: None
*
diff --git a/drivers/acpi/acpica/rslist.c b/drivers/acpi/acpica/rslist.c
index 9be129f..46b5324 100644
--- a/drivers/acpi/acpica/rslist.c
+++ b/drivers/acpi/acpica/rslist.c
@@ -139,7 +139,7 @@ acpi_rs_convert_aml_to_resources(u8 * aml,
*
* FUNCTION: acpi_rs_convert_resources_to_aml
*
- * PARAMETERS: Resource - Pointer to the resource linked list
+ * PARAMETERS: resource - Pointer to the resource linked list
* aml_size_needed - Calculated size of the byte stream
* needed from calling acpi_rs_get_aml_length()
* The size of the output_buffer is
diff --git a/drivers/acpi/acpica/rsmisc.c b/drivers/acpi/acpica/rsmisc.c
index 8073b37..c6f291c 100644
--- a/drivers/acpi/acpica/rsmisc.c
+++ b/drivers/acpi/acpica/rsmisc.c
@@ -57,9 +57,9 @@ ACPI_MODULE_NAME("rsmisc")
*
* FUNCTION: acpi_rs_convert_aml_to_resource
*
- * PARAMETERS: Resource - Pointer to the resource descriptor
- * Aml - Where the AML descriptor is returned
- * Info - Pointer to appropriate conversion table
+ * PARAMETERS: resource - Pointer to the resource descriptor
+ * aml - Where the AML descriptor is returned
+ * info - Pointer to appropriate conversion table
*
* RETURN: Status
*
@@ -406,7 +406,7 @@ acpi_rs_convert_aml_to_resource(struct acpi_resource *resource,
case ACPI_RSC_EXIT_NE:
/*
- * Control - Exit conversion if not equal
+ * control - Exit conversion if not equal
*/
switch (info->resource_offset) {
case ACPI_RSC_COMPARE_AML_LENGTH:
@@ -454,9 +454,9 @@ acpi_rs_convert_aml_to_resource(struct acpi_resource *resource,
*
* FUNCTION: acpi_rs_convert_resource_to_aml
*
- * PARAMETERS: Resource - Pointer to the resource descriptor
- * Aml - Where the AML descriptor is returned
- * Info - Pointer to appropriate conversion table
+ * PARAMETERS: resource - Pointer to the resource descriptor
+ * aml - Where the AML descriptor is returned
+ * info - Pointer to appropriate conversion table
*
* RETURN: Status
*
@@ -726,7 +726,7 @@ acpi_rs_convert_resource_to_aml(struct acpi_resource *resource,
case ACPI_RSC_EXIT_LE:
/*
- * Control - Exit conversion if less than or equal
+ * control - Exit conversion if less than or equal
*/
if (item_count <= info->value) {
goto exit;
@@ -735,7 +735,7 @@ acpi_rs_convert_resource_to_aml(struct acpi_resource *resource,
case ACPI_RSC_EXIT_NE:
/*
- * Control - Exit conversion if not equal
+ * control - Exit conversion if not equal
*/
switch (COMPARE_OPCODE(info)) {
case ACPI_RSC_COMPARE_VALUE:
@@ -757,7 +757,7 @@ acpi_rs_convert_resource_to_aml(struct acpi_resource *resource,
case ACPI_RSC_EXIT_EQ:
/*
- * Control - Exit conversion if equal
+ * control - Exit conversion if equal
*/
if (*ACPI_ADD_PTR(u8, resource,
COMPARE_TARGET(info)) ==
@@ -783,7 +783,7 @@ acpi_rs_convert_resource_to_aml(struct acpi_resource *resource,
#if 0
/* Previous resource validations */
-if (aml->ext_address64.revision_iD != AML_RESOURCE_EXTENDED_ADDRESS_REVISION) {
+if (aml->ext_address64.revision_ID != AML_RESOURCE_EXTENDED_ADDRESS_REVISION) {
return_ACPI_STATUS(AE_SUPPORT);
}
diff --git a/drivers/acpi/acpica/rsutils.c b/drivers/acpi/acpica/rsutils.c
index 433a375..37d5241 100644
--- a/drivers/acpi/acpica/rsutils.c
+++ b/drivers/acpi/acpica/rsutils.c
@@ -53,8 +53,8 @@ ACPI_MODULE_NAME("rsutils")
*
* FUNCTION: acpi_rs_decode_bitmask
*
- * PARAMETERS: Mask - Bitmask to decode
- * List - Where the converted list is returned
+ * PARAMETERS: mask - Bitmask to decode
+ * list - Where the converted list is returned
*
* RETURN: Count of bits set (length of list)
*
@@ -86,8 +86,8 @@ u8 acpi_rs_decode_bitmask(u16 mask, u8 * list)
*
* FUNCTION: acpi_rs_encode_bitmask
*
- * PARAMETERS: List - List of values to encode
- * Count - Length of list
+ * PARAMETERS: list - List of values to encode
+ * count - Length of list
*
* RETURN: Encoded bitmask
*
@@ -115,8 +115,8 @@ u16 acpi_rs_encode_bitmask(u8 * list, u8 count)
*
* FUNCTION: acpi_rs_move_data
*
- * PARAMETERS: Destination - Pointer to the destination descriptor
- * Source - Pointer to the source descriptor
+ * PARAMETERS: destination - Pointer to the destination descriptor
+ * source - Pointer to the source descriptor
* item_count - How many items to move
* move_type - Byte width
*
@@ -183,7 +183,7 @@ acpi_rs_move_data(void *destination, void *source, u16 item_count, u8 move_type)
*
* PARAMETERS: total_length - Length of the AML descriptor, including
* the header and length fields.
- * Aml - Pointer to the raw AML descriptor
+ * aml - Pointer to the raw AML descriptor
*
* RETURN: None
*
@@ -235,7 +235,7 @@ acpi_rs_set_resource_length(acpi_rsdesc_size total_length,
* PARAMETERS: descriptor_type - Byte to be inserted as the type
* total_length - Length of the AML descriptor, including
* the header and length fields.
- * Aml - Pointer to the raw AML descriptor
+ * aml - Pointer to the raw AML descriptor
*
* RETURN: None
*
@@ -265,8 +265,8 @@ acpi_rs_set_resource_header(u8 descriptor_type,
*
* FUNCTION: acpi_rs_strcpy
*
- * PARAMETERS: Destination - Pointer to the destination string
- * Source - Pointer to the source string
+ * PARAMETERS: destination - Pointer to the destination string
+ * source - Pointer to the source string
*
* RETURN: String length, including NULL terminator
*
@@ -300,7 +300,7 @@ static u16 acpi_rs_strcpy(char *destination, char *source)
* minimum_length - Minimum length of the descriptor (minus
* any optional fields)
* resource_source - Where the resource_source is returned
- * Aml - Pointer to the raw AML descriptor
+ * aml - Pointer to the raw AML descriptor
* string_ptr - (optional) where to store the actual
* resource_source string
*
@@ -386,7 +386,7 @@ acpi_rs_get_resource_source(acpi_rs_length resource_length,
*
* FUNCTION: acpi_rs_set_resource_source
*
- * PARAMETERS: Aml - Pointer to the raw AML descriptor
+ * PARAMETERS: aml - Pointer to the raw AML descriptor
* minimum_length - Minimum length of the descriptor (minus
* any optional fields)
* resource_source - Internal resource_source
@@ -445,7 +445,7 @@ acpi_rs_set_resource_source(union aml_resource * aml,
*
* FUNCTION: acpi_rs_get_prt_method_data
*
- * PARAMETERS: Node - Device node
+ * PARAMETERS: node - Device node
* ret_buffer - Pointer to a buffer structure for the
* results
*
@@ -494,7 +494,7 @@ acpi_rs_get_prt_method_data(struct acpi_namespace_node * node,
*
* FUNCTION: acpi_rs_get_crs_method_data
*
- * PARAMETERS: Node - Device node
+ * PARAMETERS: node - Device node
* ret_buffer - Pointer to a buffer structure for the
* results
*
@@ -534,7 +534,7 @@ acpi_rs_get_crs_method_data(struct acpi_namespace_node *node,
*/
status = acpi_rs_create_resource_list(obj_desc, ret_buffer);
- /* On exit, we must delete the object returned by evaluate_object */
+ /* On exit, we must delete the object returned by evaluateObject */
acpi_ut_remove_reference(obj_desc);
return_ACPI_STATUS(status);
@@ -544,7 +544,7 @@ acpi_rs_get_crs_method_data(struct acpi_namespace_node *node,
*
* FUNCTION: acpi_rs_get_prs_method_data
*
- * PARAMETERS: Node - Device node
+ * PARAMETERS: node - Device node
* ret_buffer - Pointer to a buffer structure for the
* results
*
@@ -585,7 +585,7 @@ acpi_rs_get_prs_method_data(struct acpi_namespace_node *node,
*/
status = acpi_rs_create_resource_list(obj_desc, ret_buffer);
- /* On exit, we must delete the object returned by evaluate_object */
+ /* On exit, we must delete the object returned by evaluateObject */
acpi_ut_remove_reference(obj_desc);
return_ACPI_STATUS(status);
@@ -596,7 +596,7 @@ acpi_rs_get_prs_method_data(struct acpi_namespace_node *node,
*
* FUNCTION: acpi_rs_get_aei_method_data
*
- * PARAMETERS: Node - Device node
+ * PARAMETERS: node - Device node
* ret_buffer - Pointer to a buffer structure for the
* results
*
@@ -636,7 +636,7 @@ acpi_rs_get_aei_method_data(struct acpi_namespace_node *node,
*/
status = acpi_rs_create_resource_list(obj_desc, ret_buffer);
- /* On exit, we must delete the object returned by evaluate_object */
+ /* On exit, we must delete the object returned by evaluateObject */
acpi_ut_remove_reference(obj_desc);
return_ACPI_STATUS(status);
@@ -646,8 +646,8 @@ acpi_rs_get_aei_method_data(struct acpi_namespace_node *node,
*
* FUNCTION: acpi_rs_get_method_data
*
- * PARAMETERS: Handle - Handle to the containing object
- * Path - Path to method, relative to Handle
+ * PARAMETERS: handle - Handle to the containing object
+ * path - Path to method, relative to Handle
* ret_buffer - Pointer to a buffer structure for the
* results
*
@@ -697,7 +697,7 @@ acpi_rs_get_method_data(acpi_handle handle,
*
* FUNCTION: acpi_rs_set_srs_method_data
*
- * PARAMETERS: Node - Device node
+ * PARAMETERS: node - Device node
* in_buffer - Pointer to a buffer structure of the
* parameter
*
diff --git a/drivers/acpi/acpica/rsxface.c b/drivers/acpi/acpica/rsxface.c
index f58c098..5aad744 100644
--- a/drivers/acpi/acpica/rsxface.c
+++ b/drivers/acpi/acpica/rsxface.c
@@ -79,7 +79,7 @@ acpi_rs_validate_parameters(acpi_handle device_handle,
* FUNCTION: acpi_rs_validate_parameters
*
* PARAMETERS: device_handle - Handle to a device
- * Buffer - Pointer to a data buffer
+ * buffer - Pointer to a data buffer
* return_node - Pointer to where the device node is returned
*
* RETURN: Status
@@ -351,8 +351,8 @@ ACPI_EXPORT_SYMBOL(acpi_get_event_resources)
*
* FUNCTION: acpi_resource_to_address64
*
- * PARAMETERS: Resource - Pointer to a resource
- * Out - Pointer to the users's return buffer
+ * PARAMETERS: resource - Pointer to a resource
+ * out - Pointer to the users's return buffer
* (a struct acpi_resource_address64)
*
* RETURN: Status
@@ -415,9 +415,9 @@ ACPI_EXPORT_SYMBOL(acpi_resource_to_address64)
* FUNCTION: acpi_get_vendor_resource
*
* PARAMETERS: device_handle - Handle for the parent device object
- * Name - Method name for the parent resource
+ * name - Method name for the parent resource
* (METHOD_NAME__CRS or METHOD_NAME__PRS)
- * Uuid - Pointer to the UUID to be matched.
+ * uuid - Pointer to the UUID to be matched.
* includes both subtype and 16-byte UUID
* ret_buffer - Where the vendor resource is returned
*
@@ -526,11 +526,11 @@ acpi_rs_match_vendor_resource(struct acpi_resource *resource, void *context)
*
* PARAMETERS: device_handle - Handle to the device object for the
* device we are querying
- * Name - Method name of the resources we want.
+ * name - Method name of the resources we want.
* (METHOD_NAME__CRS, METHOD_NAME__PRS, or
* METHOD_NAME__AEI)
* user_function - Called for each resource
- * Context - Passed to user_function
+ * context - Passed to user_function
*
* RETURN: Status
*
diff --git a/drivers/acpi/acpica/tbfadt.c b/drivers/acpi/acpica/tbfadt.c
index b3e3fd03..3906518 100644
--- a/drivers/acpi/acpica/tbfadt.c
+++ b/drivers/acpi/acpica/tbfadt.c
@@ -173,7 +173,7 @@ static struct acpi_fadt_pm_info fadt_pm_info_table[] = {
*
* PARAMETERS: generic_address - GAS struct to be initialized
* byte_width - Width of this register
- * Address - Address of the register
+ * address - Address of the register
*
* RETURN: None
*
@@ -283,8 +283,8 @@ void acpi_tb_parse_fadt(u32 table_index)
*
* FUNCTION: acpi_tb_create_local_fadt
*
- * PARAMETERS: Table - Pointer to BIOS FADT
- * Length - Length of the table
+ * PARAMETERS: table - Pointer to BIOS FADT
+ * length - Length of the table
*
* RETURN: None
*
@@ -484,7 +484,7 @@ static void acpi_tb_convert_fadt(void)
*
* FUNCTION: acpi_tb_validate_fadt
*
- * PARAMETERS: Table - Pointer to the FADT to be validated
+ * PARAMETERS: table - Pointer to the FADT to be validated
*
* RETURN: None
*
@@ -583,7 +583,7 @@ static void acpi_tb_validate_fadt(void)
}
} else if (fadt_info_table[i].type & ACPI_FADT_SEPARATE_LENGTH) {
/*
- * Field is optional (PM2Control, GPE0, GPE1) AND has its own
+ * Field is optional (Pm2_control, GPE0, GPE1) AND has its own
* length field. If present, both the address and length must
* be valid.
*/
diff --git a/drivers/acpi/acpica/tbfind.c b/drivers/acpi/acpica/tbfind.c
index 4903e36..57deae1 100644
--- a/drivers/acpi/acpica/tbfind.c
+++ b/drivers/acpi/acpica/tbfind.c
@@ -52,7 +52,7 @@ ACPI_MODULE_NAME("tbfind")
*
* FUNCTION: acpi_tb_find_table
*
- * PARAMETERS: Signature - String with ACPI table signature
+ * PARAMETERS: signature - String with ACPI table signature
* oem_id - String with the table OEM ID
* oem_table_id - String with the OEM Table ID
* table_index - Where the table index is returned
diff --git a/drivers/acpi/acpica/tbinstal.c b/drivers/acpi/acpica/tbinstal.c
index a265d4a..74f97d7 100644
--- a/drivers/acpi/acpica/tbinstal.c
+++ b/drivers/acpi/acpica/tbinstal.c
@@ -397,10 +397,10 @@ acpi_status acpi_tb_resize_root_table_list(void)
*
* FUNCTION: acpi_tb_store_table
*
- * PARAMETERS: Address - Table address
- * Table - Table header
- * Length - Table length
- * Flags - flags
+ * PARAMETERS: address - Table address
+ * table - Table header
+ * length - Table length
+ * flags - flags
*
* RETURN: Status and table index.
*
diff --git a/drivers/acpi/acpica/tbutils.c b/drivers/acpi/acpica/tbutils.c
index 6818b31..b6cea30 100644
--- a/drivers/acpi/acpica/tbutils.c
+++ b/drivers/acpi/acpica/tbutils.c
@@ -178,8 +178,8 @@ u8 acpi_tb_tables_loaded(void)
*
* FUNCTION: acpi_tb_fix_string
*
- * PARAMETERS: String - String to be repaired
- * Length - Maximum length
+ * PARAMETERS: string - String to be repaired
+ * length - Maximum length
*
* RETURN: None
*
@@ -205,7 +205,7 @@ static void acpi_tb_fix_string(char *string, acpi_size length)
* FUNCTION: acpi_tb_cleanup_table_header
*
* PARAMETERS: out_header - Where the cleaned header is returned
- * Header - Input ACPI table header
+ * header - Input ACPI table header
*
* RETURN: Returns the cleaned header in out_header
*
@@ -231,8 +231,8 @@ acpi_tb_cleanup_table_header(struct acpi_table_header *out_header,
*
* FUNCTION: acpi_tb_print_table_header
*
- * PARAMETERS: Address - Table physical address
- * Header - Table header
+ * PARAMETERS: address - Table physical address
+ * header - Table header
*
* RETURN: None
*
@@ -296,8 +296,8 @@ acpi_tb_print_table_header(acpi_physical_address address,
*
* FUNCTION: acpi_tb_validate_checksum
*
- * PARAMETERS: Table - ACPI table to verify
- * Length - Length of entire table
+ * PARAMETERS: table - ACPI table to verify
+ * length - Length of entire table
*
* RETURN: Status
*
@@ -336,8 +336,8 @@ acpi_status acpi_tb_verify_checksum(struct acpi_table_header *table, u32 length)
*
* FUNCTION: acpi_tb_checksum
*
- * PARAMETERS: Buffer - Pointer to memory region to be checked
- * Length - Length of this memory region
+ * PARAMETERS: buffer - Pointer to memory region to be checked
+ * length - Length of this memory region
*
* RETURN: Checksum (u8)
*
@@ -440,8 +440,8 @@ struct acpi_table_header *acpi_tb_copy_dsdt(u32 table_index)
*
* FUNCTION: acpi_tb_install_table
*
- * PARAMETERS: Address - Physical address of DSDT or FACS
- * Signature - Table signature, NULL if no need to
+ * PARAMETERS: address - Physical address of DSDT or FACS
+ * signature - Table signature, NULL if no need to
* match
* table_index - Index into root table array
*
@@ -606,7 +606,7 @@ acpi_tb_get_root_table_entry(u8 *table_entry, u32 table_entry_size)
*
* FUNCTION: acpi_tb_parse_root_table
*
- * PARAMETERS: Rsdp - Pointer to the RSDP
+ * PARAMETERS: rsdp - Pointer to the RSDP
*
* RETURN: Status
*
diff --git a/drivers/acpi/acpica/tbxface.c b/drivers/acpi/acpica/tbxface.c
index 9bf34f7..ea4c6d5 100644
--- a/drivers/acpi/acpica/tbxface.c
+++ b/drivers/acpi/acpica/tbxface.c
@@ -59,7 +59,7 @@ ACPI_MODULE_NAME("tbxface")
*
* RETURN: Status
*
- * DESCRIPTION: Allocate a root table array. Used by i_aSL compiler and
+ * DESCRIPTION: Allocate a root table array. Used by iASL compiler and
* acpi_initialize_tables.
*
******************************************************************************/
@@ -217,8 +217,8 @@ acpi_status acpi_reallocate_root_table(void)
*
* FUNCTION: acpi_get_table_header
*
- * PARAMETERS: Signature - ACPI signature of needed table
- * Instance - Which instance (for SSDTs)
+ * PARAMETERS: signature - ACPI signature of needed table
+ * instance - Which instance (for SSDTs)
* out_table_header - The pointer to the table header to fill
*
* RETURN: Status and pointer to mapped table header
@@ -333,8 +333,8 @@ ACPI_EXPORT_SYMBOL(acpi_unload_table_id)
*
* FUNCTION: acpi_get_table_with_size
*
- * PARAMETERS: Signature - ACPI signature of needed table
- * Instance - Which instance (for SSDTs)
+ * PARAMETERS: signature - ACPI signature of needed table
+ * instance - Which instance (for SSDTs)
* out_table - Where the pointer to the table is returned
*
* RETURN: Status and pointer to table
@@ -404,7 +404,7 @@ ACPI_EXPORT_SYMBOL(acpi_get_table)
* FUNCTION: acpi_get_table_by_index
*
* PARAMETERS: table_index - Table index
- * Table - Where the pointer to the table is returned
+ * table - Where the pointer to the table is returned
*
* RETURN: Status and pointer to the table
*
@@ -458,8 +458,8 @@ ACPI_EXPORT_SYMBOL(acpi_get_table_by_index)
*
* FUNCTION: acpi_install_table_handler
*
- * PARAMETERS: Handler - Table event handler
- * Context - Value passed to the handler on each event
+ * PARAMETERS: handler - Table event handler
+ * context - Value passed to the handler on each event
*
* RETURN: Status
*
@@ -505,7 +505,7 @@ ACPI_EXPORT_SYMBOL(acpi_install_table_handler)
*
* FUNCTION: acpi_remove_table_handler
*
- * PARAMETERS: Handler - Table event handler that was installed
+ * PARAMETERS: handler - Table event handler that was installed
* previously.
*
* RETURN: Status
diff --git a/drivers/acpi/acpica/tbxfroot.c b/drivers/acpi/acpica/tbxfroot.c
index 5f6f744..74e7208 100644
--- a/drivers/acpi/acpica/tbxfroot.c
+++ b/drivers/acpi/acpica/tbxfroot.c
@@ -57,7 +57,7 @@ static acpi_status acpi_tb_validate_rsdp(struct acpi_table_rsdp *rsdp);
*
* FUNCTION: acpi_tb_validate_rsdp
*
- * PARAMETERS: Rsdp - Pointer to unvalidated RSDP
+ * PARAMETERS: rsdp - Pointer to unvalidated RSDP
*
* RETURN: Status
*
@@ -107,10 +107,10 @@ static acpi_status acpi_tb_validate_rsdp(struct acpi_table_rsdp *rsdp)
*
* RETURN: Status, RSDP physical address
*
- * DESCRIPTION: Search lower 1_mbyte of memory for the root system descriptor
+ * DESCRIPTION: Search lower 1Mbyte of memory for the root system descriptor
* pointer structure. If it is found, set *RSDP to point to it.
*
- * NOTE1: The RSDP must be either in the first 1_k of the Extended
+ * NOTE1: The RSDP must be either in the first 1K of the Extended
* BIOS Data Area or between E0000 and FFFFF (From ACPI Spec.)
* Only a 32-bit physical address is necessary.
*
@@ -152,7 +152,7 @@ acpi_status acpi_find_root_pointer(acpi_size *table_address)
if (physical_address > 0x400) {
/*
* 1b) Search EBDA paragraphs (EBDA is required to be a
- * minimum of 1_k length)
+ * minimum of 1K length)
*/
table_ptr = acpi_os_map_memory((acpi_physical_address)
physical_address,
@@ -225,7 +225,7 @@ acpi_status acpi_find_root_pointer(acpi_size *table_address)
* FUNCTION: acpi_tb_scan_memory_for_rsdp
*
* PARAMETERS: start_address - Starting pointer for search
- * Length - Maximum length to search
+ * length - Maximum length to search
*
* RETURN: Pointer to the RSDP if found, otherwise NULL.
*
diff --git a/drivers/acpi/acpica/utaddress.c b/drivers/acpi/acpica/utaddress.c
index 67932ae..6488030 100644
--- a/drivers/acpi/acpica/utaddress.c
+++ b/drivers/acpi/acpica/utaddress.c
@@ -53,8 +53,8 @@ ACPI_MODULE_NAME("utaddress")
* FUNCTION: acpi_ut_add_address_range
*
* PARAMETERS: space_id - Address space ID
- * Address - op_region start address
- * Length - op_region length
+ * address - op_region start address
+ * length - op_region length
* region_node - op_region namespace node
*
* RETURN: Status
@@ -186,9 +186,9 @@ acpi_ut_remove_address_range(acpi_adr_space_type space_id,
* FUNCTION: acpi_ut_check_address_range
*
* PARAMETERS: space_id - Address space ID
- * Address - Start address
- * Length - Length of address range
- * Warn - TRUE if warning on overlap desired
+ * address - Start address
+ * length - Length of address range
+ * warn - TRUE if warning on overlap desired
*
* RETURN: Count of the number of conflicts detected. Zero is always
* returned for Space IDs other than Memory or I/O.
diff --git a/drivers/acpi/acpica/utalloc.c b/drivers/acpi/acpica/utalloc.c
index 9982d2ea..ed29d47 100644
--- a/drivers/acpi/acpica/utalloc.c
+++ b/drivers/acpi/acpica/utalloc.c
@@ -189,7 +189,7 @@ acpi_status acpi_ut_delete_caches(void)
*
* FUNCTION: acpi_ut_validate_buffer
*
- * PARAMETERS: Buffer - Buffer descriptor to be validated
+ * PARAMETERS: buffer - Buffer descriptor to be validated
*
* RETURN: Status
*
@@ -227,7 +227,7 @@ acpi_status acpi_ut_validate_buffer(struct acpi_buffer * buffer)
*
* FUNCTION: acpi_ut_initialize_buffer
*
- * PARAMETERS: Buffer - Buffer to be validated
+ * PARAMETERS: buffer - Buffer to be validated
* required_length - Length needed
*
* RETURN: Status
@@ -308,10 +308,10 @@ acpi_ut_initialize_buffer(struct acpi_buffer * buffer,
*
* FUNCTION: acpi_ut_allocate
*
- * PARAMETERS: Size - Size of the allocation
- * Component - Component type of caller
- * Module - Source file name of caller
- * Line - Line number of caller
+ * PARAMETERS: size - Size of the allocation
+ * component - Component type of caller
+ * module - Source file name of caller
+ * line - Line number of caller
*
* RETURN: Address of the allocated memory on success, NULL on failure.
*
@@ -352,10 +352,10 @@ void *acpi_ut_allocate(acpi_size size,
*
* FUNCTION: acpi_ut_allocate_zeroed
*
- * PARAMETERS: Size - Size of the allocation
- * Component - Component type of caller
- * Module - Source file name of caller
- * Line - Line number of caller
+ * PARAMETERS: size - Size of the allocation
+ * component - Component type of caller
+ * module - Source file name of caller
+ * line - Line number of caller
*
* RETURN: Address of the allocated memory on success, NULL on failure.
*
diff --git a/drivers/acpi/acpica/utcopy.c b/drivers/acpi/acpica/utcopy.c
index 3317c0a..294692a 100644
--- a/drivers/acpi/acpica/utcopy.c
+++ b/drivers/acpi/acpica/utcopy.c
@@ -317,7 +317,7 @@ acpi_ut_copy_ielement_to_eelement(u8 object_type,
* FUNCTION: acpi_ut_copy_ipackage_to_epackage
*
* PARAMETERS: internal_object - Pointer to the object we are returning
- * Buffer - Where the object is returned
+ * buffer - Where the object is returned
* space_used - Where the object length is returned
*
* RETURN: Status
diff --git a/drivers/acpi/acpica/utdebug.c b/drivers/acpi/acpica/utdebug.c
index a0998a8..e810894 100644
--- a/drivers/acpi/acpica/utdebug.c
+++ b/drivers/acpi/acpica/utdebug.c
@@ -145,7 +145,7 @@ static const char *acpi_ut_trim_function_name(const char *function_name)
* function_name - Caller's procedure name
* module_name - Caller's module name
* component_id - Caller's component ID
- * Format - Printf format field
+ * format - Printf format field
* ... - Optional printf arguments
*
* RETURN: None
@@ -217,7 +217,7 @@ ACPI_EXPORT_SYMBOL(acpi_debug_print)
* function_name - Caller's procedure name
* module_name - Caller's module name
* component_id - Caller's component ID
- * Format - Printf format field
+ * format - Printf format field
* ... - Optional printf arguments
*
* RETURN: None
@@ -286,7 +286,7 @@ ACPI_EXPORT_SYMBOL(acpi_ut_trace)
* function_name - Caller's procedure name
* module_name - Caller's module name
* component_id - Caller's component ID
- * Pointer - Pointer to display
+ * pointer - Pointer to display
*
* RETURN: None
*
@@ -315,7 +315,7 @@ acpi_ut_trace_ptr(u32 line_number,
* function_name - Caller's procedure name
* module_name - Caller's module name
* component_id - Caller's component ID
- * String - Additional string to display
+ * string - Additional string to display
*
* RETURN: None
*
@@ -346,7 +346,7 @@ acpi_ut_trace_str(u32 line_number,
* function_name - Caller's procedure name
* module_name - Caller's module name
* component_id - Caller's component ID
- * Integer - Integer to display
+ * integer - Integer to display
*
* RETURN: None
*
@@ -408,7 +408,7 @@ ACPI_EXPORT_SYMBOL(acpi_ut_exit)
* function_name - Caller's procedure name
* module_name - Caller's module name
* component_id - Caller's component ID
- * Status - Exit status code
+ * status - Exit status code
*
* RETURN: None
*
@@ -449,7 +449,7 @@ ACPI_EXPORT_SYMBOL(acpi_ut_status_exit)
* function_name - Caller's procedure name
* module_name - Caller's module name
* component_id - Caller's component ID
- * Value - Value to be printed with exit msg
+ * value - Value to be printed with exit msg
*
* RETURN: None
*
@@ -481,7 +481,7 @@ ACPI_EXPORT_SYMBOL(acpi_ut_value_exit)
* function_name - Caller's procedure name
* module_name - Caller's module name
* component_id - Caller's component ID
- * Ptr - Pointer to display
+ * ptr - Pointer to display
*
* RETURN: None
*
@@ -508,10 +508,10 @@ acpi_ut_ptr_exit(u32 line_number,
*
* FUNCTION: acpi_ut_dump_buffer
*
- * PARAMETERS: Buffer - Buffer to dump
- * Count - Amount to dump, in bytes
- * Display - BYTE, WORD, DWORD, or QWORD display
- * component_iD - Caller's component ID
+ * PARAMETERS: buffer - Buffer to dump
+ * count - Amount to dump, in bytes
+ * display - BYTE, WORD, DWORD, or QWORD display
+ * component_ID - Caller's component ID
*
* RETURN: None
*
@@ -625,10 +625,10 @@ void acpi_ut_dump_buffer2(u8 * buffer, u32 count, u32 display)
*
* FUNCTION: acpi_ut_dump_buffer
*
- * PARAMETERS: Buffer - Buffer to dump
- * Count - Amount to dump, in bytes
- * Display - BYTE, WORD, DWORD, or QWORD display
- * component_iD - Caller's component ID
+ * PARAMETERS: buffer - Buffer to dump
+ * count - Amount to dump, in bytes
+ * display - BYTE, WORD, DWORD, or QWORD display
+ * component_ID - Caller's component ID
*
* RETURN: None
*
diff --git a/drivers/acpi/acpica/utdecode.c b/drivers/acpi/acpica/utdecode.c
index 28134ae..60a1584 100644
--- a/drivers/acpi/acpica/utdecode.c
+++ b/drivers/acpi/acpica/utdecode.c
@@ -91,8 +91,8 @@ const u8 acpi_gbl_ns_properties[ACPI_NUM_NS_TYPES] = {
*
* FUNCTION: acpi_ut_hex_to_ascii_char
*
- * PARAMETERS: Integer - Contains the hex digit
- * Position - bit position of the digit within the
+ * PARAMETERS: integer - Contains the hex digit
+ * position - bit position of the digit within the
* integer (multiple of 4)
*
* RETURN: The converted Ascii character
@@ -194,7 +194,7 @@ char *acpi_ut_get_event_name(u32 event_id)
*
* FUNCTION: acpi_ut_get_type_name
*
- * PARAMETERS: Type - An ACPI object type
+ * PARAMETERS: type - An ACPI object type
*
* RETURN: Decoded ACPI object type name
*
@@ -272,7 +272,7 @@ char *acpi_ut_get_object_type_name(union acpi_operand_object *obj_desc)
*
* FUNCTION: acpi_ut_get_node_name
*
- * PARAMETERS: Object - A namespace node
+ * PARAMETERS: object - A namespace node
*
* RETURN: ASCII name of the node
*
@@ -317,7 +317,7 @@ char *acpi_ut_get_node_name(void *object)
*
* FUNCTION: acpi_ut_get_descriptor_name
*
- * PARAMETERS: Object - An ACPI object
+ * PARAMETERS: object - An ACPI object
*
* RETURN: Decoded name of the descriptor type
*
@@ -367,7 +367,7 @@ char *acpi_ut_get_descriptor_name(void *object)
*
* FUNCTION: acpi_ut_get_reference_name
*
- * PARAMETERS: Object - An ACPI reference object
+ * PARAMETERS: object - An ACPI reference object
*
* RETURN: Decoded name of the type of reference
*
@@ -498,7 +498,7 @@ const char *acpi_ut_get_notify_name(u32 notify_value)
*
* FUNCTION: acpi_ut_valid_object_type
*
- * PARAMETERS: Type - Object type to be validated
+ * PARAMETERS: type - Object type to be validated
*
* RETURN: TRUE if valid object type, FALSE otherwise
*
diff --git a/drivers/acpi/acpica/utdelete.c b/drivers/acpi/acpica/utdelete.c
index 0d50f2c..7981054 100644
--- a/drivers/acpi/acpica/utdelete.c
+++ b/drivers/acpi/acpica/utdelete.c
@@ -60,7 +60,7 @@ acpi_ut_update_ref_count(union acpi_operand_object *object, u32 action);
*
* FUNCTION: acpi_ut_delete_internal_obj
*
- * PARAMETERS: Object - Object to be deleted
+ * PARAMETERS: object - Object to be deleted
*
* RETURN: None
*
@@ -358,8 +358,8 @@ void acpi_ut_delete_internal_object_list(union acpi_operand_object **obj_list)
*
* FUNCTION: acpi_ut_update_ref_count
*
- * PARAMETERS: Object - Object whose ref count is to be updated
- * Action - What to do
+ * PARAMETERS: object - Object whose ref count is to be updated
+ * action - What to do
*
* RETURN: New ref count
*
@@ -456,9 +456,9 @@ acpi_ut_update_ref_count(union acpi_operand_object *object, u32 action)
*
* FUNCTION: acpi_ut_update_object_reference
*
- * PARAMETERS: Object - Increment ref count for this object
+ * PARAMETERS: object - Increment ref count for this object
* and all sub-objects
- * Action - Either REF_INCREMENT or REF_DECREMENT or
+ * action - Either REF_INCREMENT or REF_DECREMENT or
* REF_FORCE_DELETE
*
* RETURN: Status
@@ -640,7 +640,7 @@ acpi_ut_update_object_reference(union acpi_operand_object *object, u16 action)
*
* FUNCTION: acpi_ut_add_reference
*
- * PARAMETERS: Object - Object whose reference count is to be
+ * PARAMETERS: object - Object whose reference count is to be
* incremented
*
* RETURN: None
@@ -674,7 +674,7 @@ void acpi_ut_add_reference(union acpi_operand_object *object)
*
* FUNCTION: acpi_ut_remove_reference
*
- * PARAMETERS: Object - Object whose ref count will be decremented
+ * PARAMETERS: object - Object whose ref count will be decremented
*
* RETURN: None
*
diff --git a/drivers/acpi/acpica/uteval.c b/drivers/acpi/acpica/uteval.c
index 479f32b..a9c65fb 100644
--- a/drivers/acpi/acpica/uteval.c
+++ b/drivers/acpi/acpica/uteval.c
@@ -53,7 +53,7 @@ ACPI_MODULE_NAME("uteval")
* FUNCTION: acpi_ut_evaluate_object
*
* PARAMETERS: prefix_node - Starting node
- * Path - Path to object from starting node
+ * path - Path to object from starting node
* expected_return_types - Bitmap of allowed return types
* return_desc - Where a return value is stored
*
@@ -187,7 +187,7 @@ acpi_ut_evaluate_object(struct acpi_namespace_node *prefix_node,
*
* PARAMETERS: object_name - Object name to be evaluated
* device_node - Node for the device
- * Value - Where the value is returned
+ * value - Where the value is returned
*
* RETURN: Status
*
@@ -229,7 +229,7 @@ acpi_ut_evaluate_numeric_object(char *object_name,
* FUNCTION: acpi_ut_execute_STA
*
* PARAMETERS: device_node - Node for the device
- * Flags - Where the status flags are returned
+ * flags - Where the status flags are returned
*
* RETURN: Status
*
diff --git a/drivers/acpi/acpica/utglobal.c b/drivers/acpi/acpica/utglobal.c
index 9bd5b4c..ed18931 100644
--- a/drivers/acpi/acpica/utglobal.c
+++ b/drivers/acpi/acpica/utglobal.c
@@ -285,7 +285,7 @@ acpi_status acpi_ut_init_globals(void)
acpi_gbl_owner_id_mask[i] = 0;
}
- /* Last owner_iD is never valid */
+ /* Last owner_ID is never valid */
acpi_gbl_owner_id_mask[ACPI_NUM_OWNERID_MASKS - 1] = 0x80000000;
diff --git a/drivers/acpi/acpica/utids.c b/drivers/acpi/acpica/utids.c
index c92eb1d..5d84e19 100644
--- a/drivers/acpi/acpica/utids.c
+++ b/drivers/acpi/acpica/utids.c
@@ -1,6 +1,6 @@
/******************************************************************************
*
- * Module Name: utids - support for device IDs - HID, UID, CID
+ * Module Name: utids - support for device Ids - HID, UID, CID
*
*****************************************************************************/
diff --git a/drivers/acpi/acpica/utlock.c b/drivers/acpi/acpica/utlock.c
index 155fd78..b1eb7f1 100644
--- a/drivers/acpi/acpica/utlock.c
+++ b/drivers/acpi/acpica/utlock.c
@@ -52,7 +52,7 @@ ACPI_MODULE_NAME("utlock")
* FUNCTION: acpi_ut_create_rw_lock
* acpi_ut_delete_rw_lock
*
- * PARAMETERS: Lock - Pointer to a valid RW lock
+ * PARAMETERS: lock - Pointer to a valid RW lock
*
* RETURN: Status
*
@@ -89,7 +89,7 @@ void acpi_ut_delete_rw_lock(struct acpi_rw_lock *lock)
* FUNCTION: acpi_ut_acquire_read_lock
* acpi_ut_release_read_lock
*
- * PARAMETERS: Lock - Pointer to a valid RW lock
+ * PARAMETERS: lock - Pointer to a valid RW lock
*
* RETURN: Status
*
@@ -149,7 +149,7 @@ acpi_status acpi_ut_release_read_lock(struct acpi_rw_lock *lock)
* FUNCTION: acpi_ut_acquire_write_lock
* acpi_ut_release_write_lock
*
- * PARAMETERS: Lock - Pointer to a valid RW lock
+ * PARAMETERS: lock - Pointer to a valid RW lock
*
* RETURN: Status
*
diff --git a/drivers/acpi/acpica/utmath.c b/drivers/acpi/acpica/utmath.c
index 2491a55..d88a8aa 100644
--- a/drivers/acpi/acpica/utmath.c
+++ b/drivers/acpi/acpica/utmath.c
@@ -73,8 +73,8 @@ typedef union uint64_overlay {
*
* FUNCTION: acpi_ut_short_divide
*
- * PARAMETERS: Dividend - 64-bit dividend
- * Divisor - 32-bit divisor
+ * PARAMETERS: dividend - 64-bit dividend
+ * divisor - 32-bit divisor
* out_quotient - Pointer to where the quotient is returned
* out_remainder - Pointer to where the remainder is returned
*
diff --git a/drivers/acpi/acpica/utmisc.c b/drivers/acpi/acpica/utmisc.c
index e30c060..33c6cf7 100644
--- a/drivers/acpi/acpica/utmisc.c
+++ b/drivers/acpi/acpica/utmisc.c
@@ -55,7 +55,7 @@ ACPI_MODULE_NAME("utmisc")
*
* FUNCTION: ut_convert_backslashes
*
- * PARAMETERS: Pathname - File pathname string to be converted
+ * PARAMETERS: pathname - File pathname string to be converted
*
* RETURN: Modifies the input Pathname
*
@@ -84,7 +84,7 @@ void ut_convert_backslashes(char *pathname)
*
* FUNCTION: acpi_ut_is_pci_root_bridge
*
- * PARAMETERS: Id - The HID/CID in string format
+ * PARAMETERS: id - The HID/CID in string format
*
* RETURN: TRUE if the Id is a match for a PCI/PCI-Express Root Bridge
*
@@ -112,7 +112,7 @@ u8 acpi_ut_is_pci_root_bridge(char *id)
*
* FUNCTION: acpi_ut_is_aml_table
*
- * PARAMETERS: Table - An ACPI table
+ * PARAMETERS: table - An ACPI table
*
* RETURN: TRUE if table contains executable AML; FALSE otherwise
*
@@ -246,7 +246,7 @@ acpi_status acpi_ut_allocate_owner_id(acpi_owner_id * owner_id)
*
* FUNCTION: acpi_ut_release_owner_id
*
- * PARAMETERS: owner_id_ptr - Pointer to a previously allocated owner_iD
+ * PARAMETERS: owner_id_ptr - Pointer to a previously allocated owner_ID
*
* RETURN: None. No error is returned because we are either exiting a
* control method or unloading a table. Either way, we would
@@ -269,7 +269,7 @@ void acpi_ut_release_owner_id(acpi_owner_id * owner_id_ptr)
*owner_id_ptr = 0;
- /* Zero is not a valid owner_iD */
+ /* Zero is not a valid owner_ID */
if (owner_id == 0) {
ACPI_ERROR((AE_INFO, "Invalid OwnerId: 0x%2.2X", owner_id));
@@ -343,7 +343,7 @@ void acpi_ut_strupr(char *src_string)
*
* FUNCTION: acpi_ut_print_string
*
- * PARAMETERS: String - Null terminated ASCII string
+ * PARAMETERS: string - Null terminated ASCII string
* max_length - Maximum output length
*
* RETURN: None
@@ -429,7 +429,7 @@ void acpi_ut_print_string(char *string, u8 max_length)
*
* FUNCTION: acpi_ut_dword_byte_swap
*
- * PARAMETERS: Value - Value to be converted
+ * PARAMETERS: value - Value to be converted
*
* RETURN: u32 integer with bytes swapped
*
@@ -499,9 +499,9 @@ void acpi_ut_set_integer_width(u8 revision)
*
* FUNCTION: acpi_ut_display_init_pathname
*
- * PARAMETERS: Type - Object type of the node
+ * PARAMETERS: type - Object type of the node
* obj_handle - Handle whose pathname will be displayed
- * Path - Additional path string to be appended.
+ * path - Additional path string to be appended.
* (NULL if no extra path)
*
* RETURN: acpi_status
@@ -566,8 +566,8 @@ acpi_ut_display_init_pathname(u8 type,
*
* FUNCTION: acpi_ut_valid_acpi_char
*
- * PARAMETERS: Char - The character to be examined
- * Position - Byte position (0-3)
+ * PARAMETERS: char - The character to be examined
+ * position - Byte position (0-3)
*
* RETURN: TRUE if the character is valid, FALSE otherwise
*
@@ -602,7 +602,7 @@ u8 acpi_ut_valid_acpi_char(char character, u32 position)
*
* FUNCTION: acpi_ut_valid_acpi_name
*
- * PARAMETERS: Name - The name to be examined
+ * PARAMETERS: name - The name to be examined
*
* RETURN: TRUE if the name is valid, FALSE otherwise
*
@@ -633,7 +633,7 @@ u8 acpi_ut_valid_acpi_name(u32 name)
*
* FUNCTION: acpi_ut_repair_name
*
- * PARAMETERS: Name - The ACPI name to be repaired
+ * PARAMETERS: name - The ACPI name to be repaired
*
* RETURN: Repaired version of the name
*
@@ -667,8 +667,8 @@ acpi_name acpi_ut_repair_name(char *name)
*
* FUNCTION: acpi_ut_strtoul64
*
- * PARAMETERS: String - Null terminated string
- * Base - Radix of the string: 16 or ACPI_ANY_BASE;
+ * PARAMETERS: string - Null terminated string
+ * base - Radix of the string: 16 or ACPI_ANY_BASE;
* ACPI_ANY_BASE means 'in behalf of to_integer'
* ret_integer - Where the converted integer is returned
*
@@ -717,7 +717,7 @@ acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 * ret_integer)
if (to_integer_op) {
/*
- * Base equal to ACPI_ANY_BASE means 'to_integer operation case'.
+ * Base equal to ACPI_ANY_BASE means 'ToInteger operation case'.
* We need to determine if it is decimal or hexadecimal.
*/
if ((*string == '0') && (ACPI_TOLOWER(*(string + 1)) == 'x')) {
@@ -840,8 +840,8 @@ acpi_status acpi_ut_strtoul64(char *string, u32 base, u64 * ret_integer)
*
* FUNCTION: acpi_ut_create_update_state_and_push
*
- * PARAMETERS: Object - Object to be added to the new state
- * Action - Increment/Decrement
+ * PARAMETERS: object - Object to be added to the new state
+ * action - Increment/Decrement
* state_list - List the state will be added to
*
* RETURN: Status
@@ -881,7 +881,7 @@ acpi_ut_create_update_state_and_push(union acpi_operand_object *object,
* PARAMETERS: source_object - The package to walk
* target_object - Target object (if package is being copied)
* walk_callback - Called once for each package element
- * Context - Passed to the callback function
+ * context - Passed to the callback function
*
* RETURN: Status
*
diff --git a/drivers/acpi/acpica/utmutex.c b/drivers/acpi/acpica/utmutex.c
index 43174df..296baa6 100644
--- a/drivers/acpi/acpica/utmutex.c
+++ b/drivers/acpi/acpica/utmutex.c
@@ -147,7 +147,7 @@ void acpi_ut_mutex_terminate(void)
*
* FUNCTION: acpi_ut_create_mutex
*
- * PARAMETERS: mutex_iD - ID of the mutex to be created
+ * PARAMETERS: mutex_ID - ID of the mutex to be created
*
* RETURN: Status
*
@@ -176,7 +176,7 @@ static acpi_status acpi_ut_create_mutex(acpi_mutex_handle mutex_id)
*
* FUNCTION: acpi_ut_delete_mutex
*
- * PARAMETERS: mutex_iD - ID of the mutex to be deleted
+ * PARAMETERS: mutex_ID - ID of the mutex to be deleted
*
* RETURN: Status
*
@@ -199,7 +199,7 @@ static void acpi_ut_delete_mutex(acpi_mutex_handle mutex_id)
*
* FUNCTION: acpi_ut_acquire_mutex
*
- * PARAMETERS: mutex_iD - ID of the mutex to be acquired
+ * PARAMETERS: mutex_ID - ID of the mutex to be acquired
*
* RETURN: Status
*
@@ -283,7 +283,7 @@ acpi_status acpi_ut_acquire_mutex(acpi_mutex_handle mutex_id)
*
* FUNCTION: acpi_ut_release_mutex
*
- * PARAMETERS: mutex_iD - ID of the mutex to be released
+ * PARAMETERS: mutex_ID - ID of the mutex to be released
*
* RETURN: Status
*
diff --git a/drivers/acpi/acpica/utobject.c b/drivers/acpi/acpica/utobject.c
index d0441ca..655f079 100644
--- a/drivers/acpi/acpica/utobject.c
+++ b/drivers/acpi/acpica/utobject.c
@@ -69,7 +69,7 @@ acpi_ut_get_element_length(u8 object_type,
* PARAMETERS: module_name - Source file name of caller
* line_number - Line number of caller
* component_id - Component type of caller
- * Type - ACPI Type of the new object
+ * type - ACPI Type of the new object
*
* RETURN: A new internal object, null on failure
*
@@ -150,7 +150,7 @@ union acpi_operand_object *acpi_ut_create_internal_object_dbg(const char
*
* FUNCTION: acpi_ut_create_package_object
*
- * PARAMETERS: Count - Number of package elements
+ * PARAMETERS: count - Number of package elements
*
* RETURN: Pointer to a new Package object, null on failure
*
@@ -323,7 +323,7 @@ union acpi_operand_object *acpi_ut_create_string_object(acpi_size string_size)
*
* FUNCTION: acpi_ut_valid_internal_object
*
- * PARAMETERS: Object - Object to be validated
+ * PARAMETERS: object - Object to be validated
*
* RETURN: TRUE if object is valid, FALSE otherwise
*
@@ -407,7 +407,7 @@ void *acpi_ut_allocate_object_desc_dbg(const char *module_name,
*
* FUNCTION: acpi_ut_delete_object_desc
*
- * PARAMETERS: Object - An Acpi internal object to be deleted
+ * PARAMETERS: object - An Acpi internal object to be deleted
*
* RETURN: None.
*
diff --git a/drivers/acpi/acpica/utosi.c b/drivers/acpi/acpica/utosi.c
index 2360cf7..34ef0bd 100644
--- a/drivers/acpi/acpica/utosi.c
+++ b/drivers/acpi/acpica/utosi.c
@@ -68,7 +68,7 @@ static struct acpi_interface_info acpi_default_supported_interfaces[] = {
{"Windows 2001.1", NULL, 0, ACPI_OSI_WINSRV_2003}, /* Windows Server 2003 */
{"Windows 2001 SP2", NULL, 0, ACPI_OSI_WIN_XP_SP2}, /* Windows XP SP2 */
{"Windows 2001.1 SP1", NULL, 0, ACPI_OSI_WINSRV_2003_SP1}, /* Windows Server 2003 SP1 - Added 03/2006 */
- {"Windows 2006", NULL, 0, ACPI_OSI_WIN_VISTA}, /* Windows Vista - Added 03/2006 */
+ {"Windows 2006", NULL, 0, ACPI_OSI_WIN_VISTA}, /* Windows vista - Added 03/2006 */
{"Windows 2006.1", NULL, 0, ACPI_OSI_WINSRV_2008}, /* Windows Server 2008 - Added 09/2009 */
{"Windows 2006 SP1", NULL, 0, ACPI_OSI_WIN_VISTA_SP1}, /* Windows Vista SP1 - Added 09/2009 */
{"Windows 2006 SP2", NULL, 0, ACPI_OSI_WIN_VISTA_SP2}, /* Windows Vista SP2 - Added 09/2010 */
diff --git a/drivers/acpi/acpica/utresrc.c b/drivers/acpi/acpica/utresrc.c
index 9d441ea..e38bef4 100644
--- a/drivers/acpi/acpica/utresrc.c
+++ b/drivers/acpi/acpica/utresrc.c
@@ -356,13 +356,13 @@ static const u8 acpi_gbl_resource_types[] = {
ACPI_SMALL_VARIABLE_LENGTH, /* 06 start_dependent_functions */
ACPI_FIXED_LENGTH, /* 07 end_dependent_functions */
ACPI_FIXED_LENGTH, /* 08 IO */
- ACPI_FIXED_LENGTH, /* 09 fixed_iO */
- ACPI_FIXED_LENGTH, /* 0_a fixed_dMA */
+ ACPI_FIXED_LENGTH, /* 09 fixed_IO */
+ ACPI_FIXED_LENGTH, /* 0A fixed_DMA */
0,
0,
0,
- ACPI_VARIABLE_LENGTH, /* 0_e vendor_short */
- ACPI_FIXED_LENGTH, /* 0_f end_tag */
+ ACPI_VARIABLE_LENGTH, /* 0E vendor_short */
+ ACPI_FIXED_LENGTH, /* 0F end_tag */
/* Large descriptors */
@@ -375,16 +375,16 @@ static const u8 acpi_gbl_resource_types[] = {
ACPI_FIXED_LENGTH, /* 06 memory32_fixed */
ACPI_VARIABLE_LENGTH, /* 07 Dword* address */
ACPI_VARIABLE_LENGTH, /* 08 Word* address */
- ACPI_VARIABLE_LENGTH, /* 09 extended_iRQ */
- ACPI_VARIABLE_LENGTH, /* 0_a Qword* address */
- ACPI_FIXED_LENGTH, /* 0_b Extended* address */
- ACPI_VARIABLE_LENGTH, /* 0_c Gpio* */
+ ACPI_VARIABLE_LENGTH, /* 09 extended_IRQ */
+ ACPI_VARIABLE_LENGTH, /* 0A Qword* address */
+ ACPI_FIXED_LENGTH, /* 0B Extended* address */
+ ACPI_VARIABLE_LENGTH, /* 0C Gpio* */
0,
- ACPI_VARIABLE_LENGTH /* 0_e *serial_bus */
+ ACPI_VARIABLE_LENGTH /* 0E *serial_bus */
};
/*
- * For the i_aSL compiler/disassembler, we don't want any error messages
+ * For the iASL compiler/disassembler, we don't want any error messages
* because the disassembler uses the resource validation code to determine
* if Buffer objects are actually Resource Templates.
*/
@@ -398,11 +398,11 @@ static const u8 acpi_gbl_resource_types[] = {
*
* FUNCTION: acpi_ut_walk_aml_resources
*
- * PARAMETERS: Aml - Pointer to the raw AML resource template
+ * PARAMETERS: aml - Pointer to the raw AML resource template
* aml_length - Length of the entire template
* user_function - Called once for each descriptor found. If
* NULL, a pointer to the end_tag is returned
- * Context - Passed to user_function
+ * context - Passed to user_function
*
* RETURN: Status
*
@@ -513,7 +513,7 @@ acpi_ut_walk_aml_resources(u8 * aml,
*
* FUNCTION: acpi_ut_validate_resource
*
- * PARAMETERS: Aml - Pointer to the raw AML resource descriptor
+ * PARAMETERS: aml - Pointer to the raw AML resource descriptor
* return_index - Where the resource index is returned. NULL
* if the index is not required.
*
@@ -664,7 +664,7 @@ acpi_status acpi_ut_validate_resource(void *aml, u8 * return_index)
*
* FUNCTION: acpi_ut_get_resource_type
*
- * PARAMETERS: Aml - Pointer to the raw AML resource descriptor
+ * PARAMETERS: aml - Pointer to the raw AML resource descriptor
*
* RETURN: The Resource Type with no extraneous bits (except the
* Large/Small descriptor bit -- this is left alone)
@@ -698,7 +698,7 @@ u8 acpi_ut_get_resource_type(void *aml)
*
* FUNCTION: acpi_ut_get_resource_length
*
- * PARAMETERS: Aml - Pointer to the raw AML resource descriptor
+ * PARAMETERS: aml - Pointer to the raw AML resource descriptor
*
* RETURN: Byte Length
*
@@ -738,7 +738,7 @@ u16 acpi_ut_get_resource_length(void *aml)
*
* FUNCTION: acpi_ut_get_resource_header_length
*
- * PARAMETERS: Aml - Pointer to the raw AML resource descriptor
+ * PARAMETERS: aml - Pointer to the raw AML resource descriptor
*
* RETURN: Length of the AML header (depends on large/small descriptor)
*
@@ -763,7 +763,7 @@ u8 acpi_ut_get_resource_header_length(void *aml)
*
* FUNCTION: acpi_ut_get_descriptor_length
*
- * PARAMETERS: Aml - Pointer to the raw AML resource descriptor
+ * PARAMETERS: aml - Pointer to the raw AML resource descriptor
*
* RETURN: Byte length
*
diff --git a/drivers/acpi/acpica/utstate.c b/drivers/acpi/acpica/utstate.c
index 4267477..a1c9882 100644
--- a/drivers/acpi/acpica/utstate.c
+++ b/drivers/acpi/acpica/utstate.c
@@ -51,8 +51,8 @@ ACPI_MODULE_NAME("utstate")
*
* FUNCTION: acpi_ut_create_pkg_state_and_push
*
- * PARAMETERS: Object - Object to be added to the new state
- * Action - Increment/Decrement
+ * PARAMETERS: object - Object to be added to the new state
+ * action - Increment/Decrement
* state_list - List the state will be added to
*
* RETURN: Status
@@ -85,7 +85,7 @@ acpi_ut_create_pkg_state_and_push(void *internal_object,
* FUNCTION: acpi_ut_push_generic_state
*
* PARAMETERS: list_head - Head of the state stack
- * State - State object to push
+ * state - State object to push
*
* RETURN: None
*
@@ -214,8 +214,8 @@ struct acpi_thread_state *acpi_ut_create_thread_state(void)
*
* FUNCTION: acpi_ut_create_update_state
*
- * PARAMETERS: Object - Initial Object to be installed in the state
- * Action - Update action to be performed
+ * PARAMETERS: object - Initial Object to be installed in the state
+ * action - Update action to be performed
*
* RETURN: New state object, null on failure
*
@@ -252,8 +252,8 @@ union acpi_generic_state *acpi_ut_create_update_state(union acpi_operand_object
*
* FUNCTION: acpi_ut_create_pkg_state
*
- * PARAMETERS: Object - Initial Object to be installed in the state
- * Action - Update action to be performed
+ * PARAMETERS: object - Initial Object to be installed in the state
+ * action - Update action to be performed
*
* RETURN: New state object, null on failure
*
@@ -325,7 +325,7 @@ union acpi_generic_state *acpi_ut_create_control_state(void)
*
* FUNCTION: acpi_ut_delete_generic_state
*
- * PARAMETERS: State - The state object to be deleted
+ * PARAMETERS: state - The state object to be deleted
*
* RETURN: None
*
diff --git a/drivers/acpi/acpica/utxface.c b/drivers/acpi/acpica/utxface.c
index afa94f5..534179f 100644
--- a/drivers/acpi/acpica/utxface.c
+++ b/drivers/acpi/acpica/utxface.c
@@ -131,7 +131,7 @@ acpi_status __init acpi_initialize_subsystem(void)
*
* FUNCTION: acpi_enable_subsystem
*
- * PARAMETERS: Flags - Init/enable Options
+ * PARAMETERS: flags - Init/enable Options
*
* RETURN: Status
*
@@ -234,7 +234,7 @@ ACPI_EXPORT_SYMBOL(acpi_enable_subsystem)
*
* FUNCTION: acpi_initialize_objects
*
- * PARAMETERS: Flags - Init/enable Options
+ * PARAMETERS: flags - Init/enable Options
*
* RETURN: Status
*
@@ -409,7 +409,7 @@ ACPI_EXPORT_SYMBOL(acpi_subsystem_status)
* PARAMETERS: out_buffer - A buffer to receive the resources for the
* device
*
- * RETURN: Status - the status of the call
+ * RETURN: status - the status of the call
*
* DESCRIPTION: This function is called to get information about the current
* state of the ACPI subsystem. It will return system information
@@ -480,8 +480,8 @@ ACPI_EXPORT_SYMBOL(acpi_get_system_info)
*
* FUNCTION: acpi_install_initialization_handler
*
- * PARAMETERS: Handler - Callback procedure
- * Function - Not (currently) used, see below
+ * PARAMETERS: handler - Callback procedure
+ * function - Not (currently) used, see below
*
* RETURN: Status
*
@@ -618,7 +618,7 @@ ACPI_EXPORT_SYMBOL(acpi_remove_interface)
*
* FUNCTION: acpi_install_interface_handler
*
- * PARAMETERS: Handler - The _OSI interface handler to install
+ * PARAMETERS: handler - The _OSI interface handler to install
* NULL means "remove existing handler"
*
* RETURN: Status
@@ -651,9 +651,9 @@ ACPI_EXPORT_SYMBOL(acpi_install_interface_handler)
* FUNCTION: acpi_check_address_range
*
* PARAMETERS: space_id - Address space ID
- * Address - Start address
- * Length - Length
- * Warn - TRUE if warning on overlap desired
+ * address - Start address
+ * length - Length
+ * warn - TRUE if warning on overlap desired
*
* RETURN: Count of the number of conflicts detected.
*
diff --git a/drivers/acpi/acpica/utxferror.c b/drivers/acpi/acpica/utxferror.c
index 87aaddf..6d63cc3 100644
--- a/drivers/acpi/acpica/utxferror.c
+++ b/drivers/acpi/acpica/utxferror.c
@@ -53,7 +53,7 @@ ACPI_MODULE_NAME("utxferror")
* This module is used for the in-kernel ACPICA as well as the ACPICA
* tools/applications.
*
- * For the i_aSL compiler case, the output is redirected to stderr so that
+ * For the iASL compiler case, the output is redirected to stderr so that
* any of the various ACPI errors and warnings do not appear in the output
* files, for either the compiler or disassembler portions of the tool.
*/
@@ -70,7 +70,7 @@ extern FILE *acpi_gbl_output_file;
#else
/*
- * non-i_aSL case - no redirection, nothing to do
+ * non-iASL case - no redirection, nothing to do
*/
#define ACPI_MSG_REDIRECT_BEGIN
#define ACPI_MSG_REDIRECT_END
@@ -95,7 +95,7 @@ extern FILE *acpi_gbl_output_file;
*
* PARAMETERS: module_name - Caller's module name (for error output)
* line_number - Caller's line number (for error output)
- * Format - Printf format string + additional args
+ * format - Printf format string + additional args
*
* RETURN: None
*
@@ -126,8 +126,8 @@ ACPI_EXPORT_SYMBOL(acpi_error)
*
* PARAMETERS: module_name - Caller's module name (for error output)
* line_number - Caller's line number (for error output)
- * Status - Status to be formatted
- * Format - Printf format string + additional args
+ * status - Status to be formatted
+ * format - Printf format string + additional args
*
* RETURN: None
*
@@ -161,7 +161,7 @@ ACPI_EXPORT_SYMBOL(acpi_exception)
*
* PARAMETERS: module_name - Caller's module name (for error output)
* line_number - Caller's line number (for error output)
- * Format - Printf format string + additional args
+ * format - Printf format string + additional args
*
* RETURN: None
*
@@ -192,7 +192,7 @@ ACPI_EXPORT_SYMBOL(acpi_warning)
*
* PARAMETERS: module_name - Caller's module name (for error output)
* line_number - Caller's line number (for error output)
- * Format - Printf format string + additional args
+ * format - Printf format string + additional args
*
* RETURN: None
*
@@ -339,9 +339,9 @@ acpi_ut_predefined_warning(const char *module_name,
*
* PARAMETERS: module_name - Caller's module name (for error output)
* line_number - Caller's line number (for error output)
- * Pathname - Full pathname to the node
+ * pathname - Full pathname to the node
* node_flags - From Namespace node for the method/object
- * Format - Printf format string + additional args
+ * format - Printf format string + additional args
*
* RETURN: None
*
@@ -441,9 +441,9 @@ acpi_ut_namespace_error(const char *module_name,
*
* PARAMETERS: module_name - Caller's module name (for error output)
* line_number - Caller's line number (for error output)
- * Message - Error message to use on failure
+ * message - Error message to use on failure
* prefix_node - Prefix relative to the path
- * Path - Path to the node (optional)
+ * path - Path to the node (optional)
* method_status - Execution status
*
* RETURN: None
diff --git a/drivers/acpi/acpica/utxfmutex.c b/drivers/acpi/acpica/utxfmutex.c
index 1427d19..0a40a85 100644
--- a/drivers/acpi/acpica/utxfmutex.c
+++ b/drivers/acpi/acpica/utxfmutex.c
@@ -58,8 +58,8 @@ acpi_ut_get_mutex_object(acpi_handle handle,
*
* FUNCTION: acpi_ut_get_mutex_object
*
- * PARAMETERS: Handle - Mutex or prefix handle (optional)
- * Pathname - Mutex pathname (optional)
+ * PARAMETERS: handle - Mutex or prefix handle (optional)
+ * pathname - Mutex pathname (optional)
* ret_obj - Where the mutex object is returned
*
* RETURN: Status
@@ -118,9 +118,9 @@ acpi_ut_get_mutex_object(acpi_handle handle,
*
* FUNCTION: acpi_acquire_mutex
*
- * PARAMETERS: Handle - Mutex or prefix handle (optional)
- * Pathname - Mutex pathname (optional)
- * Timeout - Max time to wait for the lock (millisec)
+ * PARAMETERS: handle - Mutex or prefix handle (optional)
+ * pathname - Mutex pathname (optional)
+ * timeout - Max time to wait for the lock (millisec)
*
* RETURN: Status
*
@@ -155,8 +155,8 @@ acpi_acquire_mutex(acpi_handle handle, acpi_string pathname, u16 timeout)
*
* FUNCTION: acpi_release_mutex
*
- * PARAMETERS: Handle - Mutex or prefix handle (optional)
- * Pathname - Mutex pathname (optional)
+ * PARAMETERS: handle - Mutex or prefix handle (optional)
+ * pathname - Mutex pathname (optional)
*
* RETURN: Status
*
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index f3decb3..50faa93 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -304,16 +304,16 @@ static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr)
pr->power.states[ACPI_STATE_C3].address = pr->pblk + 5;
/* determine latencies from FADT */
- pr->power.states[ACPI_STATE_C2].latency = acpi_gbl_FADT.C2latency;
- pr->power.states[ACPI_STATE_C3].latency = acpi_gbl_FADT.C3latency;
+ pr->power.states[ACPI_STATE_C2].latency = acpi_gbl_FADT.c2_latency;
+ pr->power.states[ACPI_STATE_C3].latency = acpi_gbl_FADT.c3_latency;
/*
* FADT specified C2 latency must be less than or equal to
* 100 microseconds.
*/
- if (acpi_gbl_FADT.C2latency > ACPI_PROCESSOR_MAX_C2_LATENCY) {
+ if (acpi_gbl_FADT.c2_latency > ACPI_PROCESSOR_MAX_C2_LATENCY) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "C2 latency too large [%d]\n", acpi_gbl_FADT.C2latency));
+ "C2 latency too large [%d]\n", acpi_gbl_FADT.c2_latency));
/* invalidate C2 */
pr->power.states[ACPI_STATE_C2].address = 0;
}
@@ -322,9 +322,9 @@ static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr)
* FADT supplied C3 latency must be less than or equal to
* 1000 microseconds.
*/
- if (acpi_gbl_FADT.C3latency > ACPI_PROCESSOR_MAX_C3_LATENCY) {
+ if (acpi_gbl_FADT.c3_latency > ACPI_PROCESSOR_MAX_C3_LATENCY) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
- "C3 latency too large [%d]\n", acpi_gbl_FADT.C3latency));
+ "C3 latency too large [%d]\n", acpi_gbl_FADT.c3_latency));
/* invalidate C3 */
pr->power.states[ACPI_STATE_C3].address = 0;
}
diff --git a/include/acpi/acrestyp.h b/include/acpi/acrestyp.h
index 2504091..40349ae 100644
--- a/include/acpi/acrestyp.h
+++ b/include/acpi/acrestyp.h
@@ -48,7 +48,7 @@
* Definitions for Resource Attributes
*/
typedef u16 acpi_rs_length; /* Resource Length field is fixed at 16 bits */
-typedef u32 acpi_rsdesc_size; /* Max Resource Descriptor size is (Length+3) = (64_k-1)+3 */
+typedef u32 acpi_rsdesc_size; /* Max Resource Descriptor size is (Length+3) = (64K-1)+3 */
/*
* Memory Attributes
@@ -332,7 +332,7 @@ struct acpi_resource_address64 {
};
struct acpi_resource_extended_address64 {
- ACPI_RESOURCE_ADDRESS_COMMON u8 revision_iD;
+ ACPI_RESOURCE_ADDRESS_COMMON u8 revision_ID;
u64 granularity;
u64 minimum;
u64 maximum;
diff --git a/include/acpi/actbl.h b/include/acpi/actbl.h
index a629a01..59a73e1 100644
--- a/include/acpi/actbl.h
+++ b/include/acpi/actbl.h
@@ -212,7 +212,7 @@ struct acpi_table_fadt {
u32 smi_command; /* 32-bit Port address of SMI command port */
u8 acpi_enable; /* Value to write to smi_cmd to enable ACPI */
u8 acpi_disable; /* Value to write to smi_cmd to disable ACPI */
- u8 S4bios_request; /* Value to write to SMI CMD to enter S4BIOS state */
+ u8 s4_bios_request; /* Value to write to SMI CMD to enter S4BIOS state */
u8 pstate_control; /* Processor performance state control */
u32 pm1a_event_block; /* 32-bit Port address of Power Mgt 1a Event Reg Blk */
u32 pm1b_event_block; /* 32-bit Port address of Power Mgt 1b Event Reg Blk */
@@ -230,8 +230,8 @@ struct acpi_table_fadt {
u8 gpe1_block_length; /* Byte Length of ports at gpe1_block */
u8 gpe1_base; /* Offset in GPE number space where GPE1 events start */
u8 cst_control; /* Support for the _CST object and C States change notification */
- u16 C2latency; /* Worst case HW latency to enter/exit C2 state */
- u16 C3latency; /* Worst case HW latency to enter/exit C3 state */
+ u16 c2_latency; /* Worst case HW latency to enter/exit C2 state */
+ u16 c3_latency; /* Worst case HW latency to enter/exit C3 state */
u16 flush_size; /* Processor's memory cache line width, in bytes */
u16 flush_stride; /* Number of flush strides that need to be read */
u8 duty_offset; /* Processor duty cycle index in processor's P_CNT reg */
@@ -291,7 +291,7 @@ struct acpi_table_fadt {
#define ACPI_FADT_S4_RTC_VALID (1<<16) /* 16: [V4] Contents of RTC_STS valid after S4 wake (ACPI 3.0) */
#define ACPI_FADT_REMOTE_POWER_ON (1<<17) /* 17: [V4] System is compatible with remote power on (ACPI 3.0) */
#define ACPI_FADT_APIC_CLUSTER (1<<18) /* 18: [V4] All local APICs must use cluster model (ACPI 3.0) */
-#define ACPI_FADT_APIC_PHYSICAL (1<<19) /* 19: [V4] All local x_aPICs must use physical dest mode (ACPI 3.0) */
+#define ACPI_FADT_APIC_PHYSICAL (1<<19) /* 19: [V4] All local xAPICs must use physical dest mode (ACPI 3.0) */
#define ACPI_FADT_HW_REDUCED (1<<20) /* 20: [V5] ACPI hardware is not implemented (ACPI 5.0) */
#define ACPI_FADT_LOW_POWER_S0 (1<<21) /* 21: [V5] S0 power savings are equal or better than S3 (ACPI 5.0) */
diff --git a/include/acpi/actbl1.h b/include/acpi/actbl1.h
index 9ac26b4..300d14e 100644
--- a/include/acpi/actbl1.h
+++ b/include/acpi/actbl1.h
@@ -676,7 +676,7 @@ struct acpi_madt_local_apic {
struct acpi_madt_io_apic {
struct acpi_subtable_header header;
u8 id; /* I/O APIC ID */
- u8 reserved; /* Reserved - must be zero */
+ u8 reserved; /* reserved - must be zero */
u32 address; /* APIC physical address */
u32 global_irq_base; /* Global system interrupt where INTI lines start */
};
@@ -794,11 +794,11 @@ struct acpi_madt_generic_interrupt {
struct acpi_madt_generic_distributor {
struct acpi_subtable_header header;
- u16 reserved; /* Reserved - must be zero */
+ u16 reserved; /* reserved - must be zero */
u32 gic_id;
u64 base_address;
u32 global_irq_base;
- u32 reserved2; /* Reserved - must be zero */
+ u32 reserved2; /* reserved - must be zero */
};
/*
@@ -841,7 +841,7 @@ struct acpi_table_msct {
u64 max_address; /* Max physical address in system */
};
-/* Subtable - Maximum Proximity Domain Information. Version 1 */
+/* subtable - Maximum Proximity Domain Information. Version 1 */
struct acpi_msct_proximity {
u8 revision;
diff --git a/include/acpi/actbl2.h b/include/acpi/actbl2.h
index 34198bf2..d9ceb3d 100644
--- a/include/acpi/actbl2.h
+++ b/include/acpi/actbl2.h
@@ -66,7 +66,7 @@
#define ACPI_SIG_DBGP "DBGP" /* Debug Port table */
#define ACPI_SIG_DMAR "DMAR" /* DMA Remapping table */
#define ACPI_SIG_HPET "HPET" /* High Precision Event Timer table */
-#define ACPI_SIG_IBFT "IBFT" /* i_sCSI Boot Firmware Table */
+#define ACPI_SIG_IBFT "IBFT" /* iSCSI Boot Firmware Table */
#define ACPI_SIG_IVRS "IVRS" /* I/O Virtualization Reporting Structure */
#define ACPI_SIG_MCFG "MCFG" /* PCI Memory Mapped Configuration table */
#define ACPI_SIG_MCHI "MCHI" /* Management Controller Host Interface table */
@@ -334,8 +334,8 @@ struct acpi_dmar_reserved_memory {
struct acpi_dmar_header header;
u16 reserved;
u16 segment;
- u64 base_address; /* 4_k aligned base address */
- u64 end_address; /* 4_k aligned limit address */
+ u64 base_address; /* 4K aligned base address */
+ u64 end_address; /* 4K aligned limit address */
};
/* Masks for Flags field above */
@@ -565,7 +565,7 @@ struct acpi_ivrs_hardware {
/* Masks for Info field above */
#define ACPI_IVHD_MSI_NUMBER_MASK 0x001F /* 5 bits, MSI message number */
-#define ACPI_IVHD_UNIT_ID_MASK 0x1F00 /* 5 bits, unit_iD */
+#define ACPI_IVHD_UNIT_ID_MASK 0x1F00 /* 5 bits, unit_ID */
/*
* Device Entries for IVHD subtable, appear after struct acpi_ivrs_hardware structure.
diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h
index bc4a327..3af87de 100644
--- a/include/acpi/actypes.h
+++ b/include/acpi/actypes.h
@@ -173,7 +173,7 @@ typedef u64 acpi_physical_address;
* to indicate that special precautions must be taken to avoid alignment faults.
* (IA64 or ia64 is currently used by existing compilers to indicate IPF.)
*
- * Note: Em64_t and other X86-64 processors support misaligned transfers,
+ * Note: EM64T and other X86-64 processors support misaligned transfers,
* so there is no need to define this flag.
*/
#if defined (__IA64__) || defined (__ia64__)
@@ -636,7 +636,7 @@ typedef u32 acpi_event_type;
#define ACPI_NUM_FIXED_EVENTS ACPI_EVENT_MAX + 1
/*
- * Event Status - Per event
+ * Event status - Per event
* -------------
* The encoding of acpi_event_status is illustrated below.
* Note that a set bit (1) indicates the property is TRUE
--
1.7.12.rc0
^ permalink raw reply related
* [PATCH 44/52] ACPICA: Update header files copyrights to 2012
From: Len Brown @ 2012-07-25 3:41 UTC (permalink / raw)
To: linux-acpi, linux-pm; +Cc: linux-kernel, Bob Moore, Lin Ming, Len Brown
In-Reply-To: <6af1c4fc5227af65092ebc848989693562bfa3e8.1343187617.git.len.brown@intel.com>
From: Bob Moore <robert.moore@intel.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
include/acpi/acexcep.h | 2 +-
include/acpi/acnames.h | 2 +-
include/acpi/acoutput.h | 2 +-
include/acpi/acpi.h | 2 +-
include/acpi/acpiosxf.h | 2 +-
include/acpi/acpixf.h | 2 +-
include/acpi/acrestyp.h | 2 +-
include/acpi/actbl.h | 2 +-
include/acpi/actbl1.h | 2 +-
include/acpi/actbl2.h | 2 +-
include/acpi/actbl3.h | 2 +-
include/acpi/actypes.h | 2 +-
include/acpi/platform/acenv.h | 2 +-
include/acpi/platform/acgcc.h | 2 +-
include/acpi/platform/aclinux.h | 2 +-
15 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/include/acpi/acexcep.h b/include/acpi/acexcep.h
index 0b5dcb6..1950344 100644
--- a/include/acpi/acexcep.h
+++ b/include/acpi/acexcep.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2011, Intel Corp.
+ * Copyright (C) 2000 - 2012, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/include/acpi/acnames.h b/include/acpi/acnames.h
index 38f5088..ef24d82 100644
--- a/include/acpi/acnames.h
+++ b/include/acpi/acnames.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2011, Intel Corp.
+ * Copyright (C) 2000 - 2012, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/include/acpi/acoutput.h b/include/acpi/acoutput.h
index f1cb332..2457ac8 100644
--- a/include/acpi/acoutput.h
+++ b/include/acpi/acoutput.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2011, Intel Corp.
+ * Copyright (C) 2000 - 2012, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/include/acpi/acpi.h b/include/acpi/acpi.h
index de39915..c433d5e 100644
--- a/include/acpi/acpi.h
+++ b/include/acpi/acpi.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2011, Intel Corp.
+ * Copyright (C) 2000 - 2012, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/include/acpi/acpiosxf.h b/include/acpi/acpiosxf.h
index f3746f7..0650f5f 100644
--- a/include/acpi/acpiosxf.h
+++ b/include/acpi/acpiosxf.h
@@ -8,7 +8,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2011, Intel Corp.
+ * Copyright (C) 2000 - 2012, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h
index 079bb90..9877432 100644
--- a/include/acpi/acpixf.h
+++ b/include/acpi/acpixf.h
@@ -6,7 +6,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2011, Intel Corp.
+ * Copyright (C) 2000 - 2012, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/include/acpi/acrestyp.h b/include/acpi/acrestyp.h
index 3506e39..2504091 100644
--- a/include/acpi/acrestyp.h
+++ b/include/acpi/acrestyp.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2011, Intel Corp.
+ * Copyright (C) 2000 - 2012, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/include/acpi/actbl.h b/include/acpi/actbl.h
index 8dea546..a629a01 100644
--- a/include/acpi/actbl.h
+++ b/include/acpi/actbl.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2011, Intel Corp.
+ * Copyright (C) 2000 - 2012, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/include/acpi/actbl1.h b/include/acpi/actbl1.h
index 71e747b..9ac26b4 100644
--- a/include/acpi/actbl1.h
+++ b/include/acpi/actbl1.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2011, Intel Corp.
+ * Copyright (C) 2000 - 2012, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/include/acpi/actbl2.h b/include/acpi/actbl2.h
index 58bdd05..34198bf2 100644
--- a/include/acpi/actbl2.h
+++ b/include/acpi/actbl2.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2011, Intel Corp.
+ * Copyright (C) 2000 - 2012, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/include/acpi/actbl3.h b/include/acpi/actbl3.h
index c22ce80..f65a0ed 100644
--- a/include/acpi/actbl3.h
+++ b/include/acpi/actbl3.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2011, Intel Corp.
+ * Copyright (C) 2000 - 2012, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h
index 376c9ed..bc4a327 100644
--- a/include/acpi/actypes.h
+++ b/include/acpi/actypes.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2011, Intel Corp.
+ * Copyright (C) 2000 - 2012, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/include/acpi/platform/acenv.h b/include/acpi/platform/acenv.h
index 5af3ed5..560a9f2 100644
--- a/include/acpi/platform/acenv.h
+++ b/include/acpi/platform/acenv.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2011, Intel Corp.
+ * Copyright (C) 2000 - 2012, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/include/acpi/platform/acgcc.h b/include/acpi/platform/acgcc.h
index e228893..72553b0 100644
--- a/include/acpi/platform/acgcc.h
+++ b/include/acpi/platform/acgcc.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2011, Intel Corp.
+ * Copyright (C) 2000 - 2012, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
diff --git a/include/acpi/platform/aclinux.h b/include/acpi/platform/aclinux.h
index 6fbc4ca..7509be3 100644
--- a/include/acpi/platform/aclinux.h
+++ b/include/acpi/platform/aclinux.h
@@ -5,7 +5,7 @@
*****************************************************************************/
/*
- * Copyright (C) 2000 - 2011, Intel Corp.
+ * Copyright (C) 2000 - 2012, Intel Corp.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
--
1.7.12.rc0
^ permalink raw reply related
* [PATCH 43/52] ACPICA: Add new ACPI table load/unload external interfaces
From: Len Brown @ 2012-07-25 3:41 UTC (permalink / raw)
To: linux-acpi, linux-pm; +Cc: linux-kernel, Bob Moore, Lin Ming, Len Brown
In-Reply-To: <6af1c4fc5227af65092ebc848989693562bfa3e8.1343187617.git.len.brown@intel.com>
From: Bob Moore <robert.moore@intel.com>
Add acpi_load_table and acpi_unload_parent_table to support
host-directed dynamic table load/unload. Intended to support
hotplug addition and removal of SSDTs.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
drivers/acpi/acpica/tbxface.c | 42 ----------
drivers/acpi/acpica/tbxfload.c | 178 +++++++++++++++++++++++++++++++++++++++++
include/acpi/acpixf.h | 13 ++-
3 files changed, 187 insertions(+), 46 deletions(-)
diff --git a/drivers/acpi/acpica/tbxface.c b/drivers/acpi/acpica/tbxface.c
index 472a91c..9bf34f7 100644
--- a/drivers/acpi/acpica/tbxface.c
+++ b/drivers/acpi/acpica/tbxface.c
@@ -215,48 +215,6 @@ acpi_status acpi_reallocate_root_table(void)
/*******************************************************************************
*
- * FUNCTION: acpi_load_table
- *
- * PARAMETERS: table_ptr - pointer to a buffer containing the entire
- * table to be loaded
- *
- * RETURN: Status
- *
- * DESCRIPTION: This function is called to load a table from the caller's
- * buffer. The buffer must contain an entire ACPI Table including
- * a valid header. The header fields will be verified, and if it
- * is determined that the table is invalid, the call will fail.
- *
- ******************************************************************************/
-acpi_status acpi_load_table(struct acpi_table_header *table_ptr)
-{
- acpi_status status;
- u32 table_index;
- struct acpi_table_desc table_desc;
-
- if (!table_ptr)
- return AE_BAD_PARAMETER;
-
- ACPI_MEMSET(&table_desc, 0, sizeof(struct acpi_table_desc));
- table_desc.pointer = table_ptr;
- table_desc.length = table_ptr->length;
- table_desc.flags = ACPI_TABLE_ORIGIN_UNKNOWN;
-
- /*
- * Install the new table into the local data structures
- */
- status = acpi_tb_add_table(&table_desc, &table_index);
- if (ACPI_FAILURE(status)) {
- return status;
- }
- status = acpi_ns_load_table(table_index, acpi_gbl_root_node);
- return status;
-}
-
-ACPI_EXPORT_SYMBOL(acpi_load_table)
-
-/*******************************************************************************
- *
* FUNCTION: acpi_get_table_header
*
* PARAMETERS: Signature - ACPI signature of needed table
diff --git a/drivers/acpi/acpica/tbxfload.c b/drivers/acpi/acpica/tbxfload.c
index 54a01ae..f87cc63 100644
--- a/drivers/acpi/acpica/tbxfload.c
+++ b/drivers/acpi/acpica/tbxfload.c
@@ -199,6 +199,184 @@ static acpi_status acpi_tb_load_namespace(void)
return_ACPI_STATUS(status);
}
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_load_table
+ *
+ * PARAMETERS: table - Pointer to a buffer containing the ACPI
+ * table to be loaded.
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Dynamically load an ACPI table from the caller's buffer. Must
+ * be a valid ACPI table with a valid ACPI table header.
+ * Note1: Mainly intended to support hotplug addition of SSDTs.
+ * Note2: Does not copy the incoming table. User is reponsible
+ * to ensure that the table is not deleted or unmapped.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_load_table(struct acpi_table_header *table)
+{
+ acpi_status status;
+ struct acpi_table_desc table_desc;
+ u32 table_index;
+
+ ACPI_FUNCTION_TRACE(acpi_load_table);
+
+ /* Parameter validation */
+
+ if (!table) {
+ return_ACPI_STATUS(AE_BAD_PARAMETER);
+ }
+
+ /* Init local table descriptor */
+
+ ACPI_MEMSET(&table_desc, 0, sizeof(struct acpi_table_desc));
+ table_desc.address = ACPI_PTR_TO_PHYSADDR(table);
+ table_desc.pointer = table;
+ table_desc.length = table->length;
+ table_desc.flags = ACPI_TABLE_ORIGIN_UNKNOWN;
+
+ /* Must acquire the interpreter lock during this operation */
+
+ status = acpi_ut_acquire_mutex(ACPI_MTX_INTERPRETER);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ /* Install the table and load it into the namespace */
+
+ ACPI_INFO((AE_INFO, "Host-directed Dynamic ACPI Table Load:"));
+ status = acpi_tb_add_table(&table_desc, &table_index);
+ if (ACPI_FAILURE(status)) {
+ goto unlock_and_exit;
+ }
+
+ status = acpi_ns_load_table(table_index, acpi_gbl_root_node);
+
+ /* Invoke table handler if present */
+
+ if (acpi_gbl_table_handler) {
+ (void)acpi_gbl_table_handler(ACPI_TABLE_EVENT_LOAD, table,
+ acpi_gbl_table_handler_context);
+ }
+
+ unlock_and_exit:
+ (void)acpi_ut_release_mutex(ACPI_MTX_INTERPRETER);
+ return_ACPI_STATUS(status);
+}
+
+ACPI_EXPORT_SYMBOL(acpi_load_table)
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_unload_parent_table
+ *
+ * PARAMETERS: object - Handle to any namespace object owned by
+ * the table to be unloaded
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Via any namespace object within an SSDT or OEMx table, unloads
+ * the table and deletes all namespace objects associated with
+ * that table. Unloading of the DSDT is not allowed.
+ * Note: Mainly intended to support hotplug removal of SSDTs.
+ *
+ ******************************************************************************/
+acpi_status acpi_unload_parent_table(acpi_handle object)
+{
+ struct acpi_namespace_node *node =
+ ACPI_CAST_PTR(struct acpi_namespace_node, object);
+ acpi_status status = AE_NOT_EXIST;
+ acpi_owner_id owner_id;
+ u32 i;
+
+ ACPI_FUNCTION_TRACE(acpi_unload_parent_table);
+
+ /* Parameter validation */
+
+ if (!object) {
+ return_ACPI_STATUS(AE_BAD_PARAMETER);
+ }
+
+ /*
+ * The node owner_id is currently the same as the parent table ID.
+ * However, this could change in the future.
+ */
+ owner_id = node->owner_id;
+ if (!owner_id) {
+
+ /* owner_id==0 means DSDT is the owner. DSDT cannot be unloaded */
+
+ return_ACPI_STATUS(AE_TYPE);
+ }
+
+ /* Must acquire the interpreter lock during this operation */
+
+ status = acpi_ut_acquire_mutex(ACPI_MTX_INTERPRETER);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ /* Find the table in the global table list */
+
+ for (i = 0; i < acpi_gbl_root_table_list.current_table_count; i++) {
+ if (owner_id != acpi_gbl_root_table_list.tables[i].owner_id) {
+ continue;
+ }
+
+ /*
+ * Allow unload of SSDT and OEMx tables only. Do not allow unload
+ * of the DSDT. No other types of tables should get here, since
+ * only these types can contain AML and thus are the only types
+ * that can create namespace objects.
+ */
+ if (ACPI_COMPARE_NAME
+ (acpi_gbl_root_table_list.tables[i].signature.ascii,
+ ACPI_SIG_DSDT)) {
+ status = AE_TYPE;
+ break;
+ }
+
+ /* Ensure the table is actually loaded */
+
+ if (!acpi_tb_is_table_loaded(i)) {
+ status = AE_NOT_EXIST;
+ break;
+ }
+
+ /* Invoke table handler if present */
+
+ if (acpi_gbl_table_handler) {
+ (void)acpi_gbl_table_handler(ACPI_TABLE_EVENT_UNLOAD,
+ acpi_gbl_root_table_list.
+ tables[i].pointer,
+ acpi_gbl_table_handler_context);
+ }
+
+ /*
+ * Delete all namespace objects owned by this table. Note that
+ * these objects can appear anywhere in the namespace by virtue
+ * of the AML "Scope" operator. Thus, we need to track ownership
+ * by an ID, not simply a position within the hierarchy.
+ */
+ status = acpi_tb_delete_namespace_by_owner(i);
+ if (ACPI_FAILURE(status)) {
+ break;
+ }
+
+ status = acpi_tb_release_owner_id(i);
+ acpi_tb_set_table_loaded_flag(i, FALSE);
+ break;
+ }
+
+ (void)acpi_ut_release_mutex(ACPI_MTX_INTERPRETER);
+ return_ACPI_STATUS(status);
+}
+
+ACPI_EXPORT_SYMBOL(acpi_unload_parent_table)
+
static int __init acpi_no_auto_ssdt_setup(char *s) {
printk(KERN_NOTICE "ACPI: SSDT auto-load disabled\n");
diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h
index 8f83f95..079bb90 100644
--- a/include/acpi/acpixf.h
+++ b/include/acpi/acpixf.h
@@ -154,15 +154,20 @@ void *acpi_callocate(u32 size);
void acpi_free(void *address);
/*
- * ACPI table manipulation interfaces
+ * ACPI table load/unload interfaces
*/
-acpi_status acpi_reallocate_root_table(void);
+acpi_status acpi_load_table(struct acpi_table_header *table);
-acpi_status acpi_find_root_pointer(acpi_size *rsdp_address);
+acpi_status acpi_unload_parent_table(acpi_handle object);
acpi_status acpi_load_tables(void);
-acpi_status acpi_load_table(struct acpi_table_header *table_ptr);
+/*
+ * ACPI table manipulation interfaces
+ */
+acpi_status acpi_reallocate_root_table(void);
+
+acpi_status acpi_find_root_pointer(acpi_size *rsdp_address);
acpi_status acpi_unload_table_id(acpi_owner_id id);
--
1.7.12.rc0
^ permalink raw reply related
* [PATCH 42/52] ACPICA: Split file: tbxface.c -> tbxfload.c
From: Len Brown @ 2012-07-25 3:41 UTC (permalink / raw)
To: linux-acpi, linux-pm; +Cc: linux-kernel, Bob Moore, Lin Ming, Len Brown
In-Reply-To: <6af1c4fc5227af65092ebc848989693562bfa3e8.1343187617.git.len.brown@intel.com>
From: Bob Moore <robert.moore@intel.com>
Split out the table load functions in preparation for addition
of new interfaces.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
drivers/acpi/acpica/Makefile | 1 +
drivers/acpi/acpica/tbxface.c | 165 +-------------------------------
drivers/acpi/acpica/tbxfload.c | 211 +++++++++++++++++++++++++++++++++++++++++
3 files changed, 213 insertions(+), 164 deletions(-)
create mode 100644 drivers/acpi/acpica/tbxfload.c
diff --git a/drivers/acpi/acpica/Makefile b/drivers/acpi/acpica/Makefile
index fa9a7d5..0a1b343 100644
--- a/drivers/acpi/acpica/Makefile
+++ b/drivers/acpi/acpica/Makefile
@@ -134,6 +134,7 @@ acpi-y += \
tbinstal.o \
tbutils.o \
tbxface.o \
+ tbxfload.o \
tbxfroot.o
acpi-y += \
diff --git a/drivers/acpi/acpica/tbxface.c b/drivers/acpi/acpica/tbxface.c
index abcc641..472a91c 100644
--- a/drivers/acpi/acpica/tbxface.c
+++ b/drivers/acpi/acpica/tbxface.c
@@ -1,7 +1,6 @@
/******************************************************************************
*
- * Module Name: tbxface - Public interfaces to the ACPI subsystem
- * ACPI table oriented interfaces
+ * Module Name: tbxface - ACPI table oriented external interfaces
*
*****************************************************************************/
@@ -51,11 +50,6 @@
#define _COMPONENT ACPI_TABLES
ACPI_MODULE_NAME("tbxface")
-/* Local prototypes */
-static acpi_status acpi_tb_load_namespace(void);
-
-static int no_auto_ssdt;
-
/*******************************************************************************
*
* FUNCTION: acpi_allocate_root_table
@@ -69,7 +63,6 @@ static int no_auto_ssdt;
* acpi_initialize_tables.
*
******************************************************************************/
-
acpi_status acpi_allocate_root_table(u32 initial_table_count)
{
@@ -502,150 +495,6 @@ acpi_get_table_by_index(u32 table_index, struct acpi_table_header **table)
ACPI_EXPORT_SYMBOL(acpi_get_table_by_index)
-/*******************************************************************************
- *
- * FUNCTION: acpi_tb_load_namespace
- *
- * PARAMETERS: None
- *
- * RETURN: Status
- *
- * DESCRIPTION: Load the namespace from the DSDT and all SSDTs/PSDTs found in
- * the RSDT/XSDT.
- *
- ******************************************************************************/
-static acpi_status acpi_tb_load_namespace(void)
-{
- acpi_status status;
- u32 i;
- struct acpi_table_header *new_dsdt;
-
- ACPI_FUNCTION_TRACE(tb_load_namespace);
-
- (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES);
-
- /*
- * Load the namespace. The DSDT is required, but any SSDT and
- * PSDT tables are optional. Verify the DSDT.
- */
- if (!acpi_gbl_root_table_list.current_table_count ||
- !ACPI_COMPARE_NAME(&
- (acpi_gbl_root_table_list.
- tables[ACPI_TABLE_INDEX_DSDT].signature),
- ACPI_SIG_DSDT)
- ||
- ACPI_FAILURE(acpi_tb_verify_table
- (&acpi_gbl_root_table_list.
- tables[ACPI_TABLE_INDEX_DSDT]))) {
- status = AE_NO_ACPI_TABLES;
- goto unlock_and_exit;
- }
-
- /*
- * Save the DSDT pointer for simple access. This is the mapped memory
- * address. We must take care here because the address of the .Tables
- * array can change dynamically as tables are loaded at run-time. Note:
- * .Pointer field is not validated until after call to acpi_tb_verify_table.
- */
- acpi_gbl_DSDT =
- acpi_gbl_root_table_list.tables[ACPI_TABLE_INDEX_DSDT].pointer;
-
- /*
- * Optionally copy the entire DSDT to local memory (instead of simply
- * mapping it.) There are some BIOSs that corrupt or replace the original
- * DSDT, creating the need for this option. Default is FALSE, do not copy
- * the DSDT.
- */
- if (acpi_gbl_copy_dsdt_locally) {
- new_dsdt = acpi_tb_copy_dsdt(ACPI_TABLE_INDEX_DSDT);
- if (new_dsdt) {
- acpi_gbl_DSDT = new_dsdt;
- }
- }
-
- /*
- * Save the original DSDT header for detection of table corruption
- * and/or replacement of the DSDT from outside the OS.
- */
- ACPI_MEMCPY(&acpi_gbl_original_dsdt_header, acpi_gbl_DSDT,
- sizeof(struct acpi_table_header));
-
- (void)acpi_ut_release_mutex(ACPI_MTX_TABLES);
-
- /* Load and parse tables */
-
- status = acpi_ns_load_table(ACPI_TABLE_INDEX_DSDT, acpi_gbl_root_node);
- if (ACPI_FAILURE(status)) {
- return_ACPI_STATUS(status);
- }
-
- /* Load any SSDT or PSDT tables. Note: Loop leaves tables locked */
-
- (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES);
- for (i = 0; i < acpi_gbl_root_table_list.current_table_count; ++i) {
- if ((!ACPI_COMPARE_NAME
- (&(acpi_gbl_root_table_list.tables[i].signature),
- ACPI_SIG_SSDT)
- &&
- !ACPI_COMPARE_NAME(&
- (acpi_gbl_root_table_list.tables[i].
- signature), ACPI_SIG_PSDT))
- ||
- ACPI_FAILURE(acpi_tb_verify_table
- (&acpi_gbl_root_table_list.tables[i]))) {
- continue;
- }
-
- if (no_auto_ssdt) {
- printk(KERN_WARNING "ACPI: SSDT ignored due to \"acpi_no_auto_ssdt\"\n");
- continue;
- }
-
- /* Ignore errors while loading tables, get as many as possible */
-
- (void)acpi_ut_release_mutex(ACPI_MTX_TABLES);
- (void)acpi_ns_load_table(i, acpi_gbl_root_node);
- (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES);
- }
-
- ACPI_DEBUG_PRINT((ACPI_DB_INIT, "ACPI Tables successfully acquired\n"));
-
- unlock_and_exit:
- (void)acpi_ut_release_mutex(ACPI_MTX_TABLES);
- return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION: acpi_load_tables
- *
- * PARAMETERS: None
- *
- * RETURN: Status
- *
- * DESCRIPTION: Load the ACPI tables from the RSDT/XSDT
- *
- ******************************************************************************/
-
-acpi_status acpi_load_tables(void)
-{
- acpi_status status;
-
- ACPI_FUNCTION_TRACE(acpi_load_tables);
-
- /* Load the namespace from the tables */
-
- status = acpi_tb_load_namespace();
- if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status,
- "While loading namespace from ACPI tables"));
- }
-
- return_ACPI_STATUS(status);
-}
-
-ACPI_EXPORT_SYMBOL(acpi_load_tables)
-
/*******************************************************************************
*
@@ -734,15 +583,3 @@ acpi_status acpi_remove_table_handler(acpi_tbl_handler handler)
}
ACPI_EXPORT_SYMBOL(acpi_remove_table_handler)
-
-
-static int __init acpi_no_auto_ssdt_setup(char *s) {
-
- printk(KERN_NOTICE "ACPI: SSDT auto-load disabled\n");
-
- no_auto_ssdt = 1;
-
- return 1;
-}
-
-__setup("acpi_no_auto_ssdt", acpi_no_auto_ssdt_setup);
diff --git a/drivers/acpi/acpica/tbxfload.c b/drivers/acpi/acpica/tbxfload.c
new file mode 100644
index 0000000..54a01ae
--- /dev/null
+++ b/drivers/acpi/acpica/tbxfload.c
@@ -0,0 +1,211 @@
+/******************************************************************************
+ *
+ * Module Name: tbxfload - Table load/unload external interfaces
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2012, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#include <linux/export.h>
+#include <acpi/acpi.h>
+#include "accommon.h"
+#include "acnamesp.h"
+#include "actables.h"
+
+#define _COMPONENT ACPI_TABLES
+ACPI_MODULE_NAME("tbxfload")
+
+/* Local prototypes */
+static acpi_status acpi_tb_load_namespace(void);
+
+static int no_auto_ssdt;
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_load_tables
+ *
+ * PARAMETERS: None
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Load the ACPI tables from the RSDT/XSDT
+ *
+ ******************************************************************************/
+
+acpi_status acpi_load_tables(void)
+{
+ acpi_status status;
+
+ ACPI_FUNCTION_TRACE(acpi_load_tables);
+
+ /* Load the namespace from the tables */
+
+ status = acpi_tb_load_namespace();
+ if (ACPI_FAILURE(status)) {
+ ACPI_EXCEPTION((AE_INFO, status,
+ "While loading namespace from ACPI tables"));
+ }
+
+ return_ACPI_STATUS(status);
+}
+
+ACPI_EXPORT_SYMBOL(acpi_load_tables)
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_tb_load_namespace
+ *
+ * PARAMETERS: None
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Load the namespace from the DSDT and all SSDTs/PSDTs found in
+ * the RSDT/XSDT.
+ *
+ ******************************************************************************/
+static acpi_status acpi_tb_load_namespace(void)
+{
+ acpi_status status;
+ u32 i;
+ struct acpi_table_header *new_dsdt;
+
+ ACPI_FUNCTION_TRACE(tb_load_namespace);
+
+ (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES);
+
+ /*
+ * Load the namespace. The DSDT is required, but any SSDT and
+ * PSDT tables are optional. Verify the DSDT.
+ */
+ if (!acpi_gbl_root_table_list.current_table_count ||
+ !ACPI_COMPARE_NAME(&
+ (acpi_gbl_root_table_list.
+ tables[ACPI_TABLE_INDEX_DSDT].signature),
+ ACPI_SIG_DSDT)
+ ||
+ ACPI_FAILURE(acpi_tb_verify_table
+ (&acpi_gbl_root_table_list.
+ tables[ACPI_TABLE_INDEX_DSDT]))) {
+ status = AE_NO_ACPI_TABLES;
+ goto unlock_and_exit;
+ }
+
+ /*
+ * Save the DSDT pointer for simple access. This is the mapped memory
+ * address. We must take care here because the address of the .Tables
+ * array can change dynamically as tables are loaded at run-time. Note:
+ * .Pointer field is not validated until after call to acpi_tb_verify_table.
+ */
+ acpi_gbl_DSDT =
+ acpi_gbl_root_table_list.tables[ACPI_TABLE_INDEX_DSDT].pointer;
+
+ /*
+ * Optionally copy the entire DSDT to local memory (instead of simply
+ * mapping it.) There are some BIOSs that corrupt or replace the original
+ * DSDT, creating the need for this option. Default is FALSE, do not copy
+ * the DSDT.
+ */
+ if (acpi_gbl_copy_dsdt_locally) {
+ new_dsdt = acpi_tb_copy_dsdt(ACPI_TABLE_INDEX_DSDT);
+ if (new_dsdt) {
+ acpi_gbl_DSDT = new_dsdt;
+ }
+ }
+
+ /*
+ * Save the original DSDT header for detection of table corruption
+ * and/or replacement of the DSDT from outside the OS.
+ */
+ ACPI_MEMCPY(&acpi_gbl_original_dsdt_header, acpi_gbl_DSDT,
+ sizeof(struct acpi_table_header));
+
+ (void)acpi_ut_release_mutex(ACPI_MTX_TABLES);
+
+ /* Load and parse tables */
+
+ status = acpi_ns_load_table(ACPI_TABLE_INDEX_DSDT, acpi_gbl_root_node);
+ if (ACPI_FAILURE(status)) {
+ return_ACPI_STATUS(status);
+ }
+
+ /* Load any SSDT or PSDT tables. Note: Loop leaves tables locked */
+
+ (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES);
+ for (i = 0; i < acpi_gbl_root_table_list.current_table_count; ++i) {
+ if ((!ACPI_COMPARE_NAME
+ (&(acpi_gbl_root_table_list.tables[i].signature),
+ ACPI_SIG_SSDT)
+ &&
+ !ACPI_COMPARE_NAME(&
+ (acpi_gbl_root_table_list.tables[i].
+ signature), ACPI_SIG_PSDT))
+ ||
+ ACPI_FAILURE(acpi_tb_verify_table
+ (&acpi_gbl_root_table_list.tables[i]))) {
+ continue;
+ }
+
+ if (no_auto_ssdt) {
+ printk(KERN_WARNING "ACPI: SSDT ignored due to \"acpi_no_auto_ssdt\"\n");
+ continue;
+ }
+
+ /* Ignore errors while loading tables, get as many as possible */
+
+ (void)acpi_ut_release_mutex(ACPI_MTX_TABLES);
+ (void)acpi_ns_load_table(i, acpi_gbl_root_node);
+ (void)acpi_ut_acquire_mutex(ACPI_MTX_TABLES);
+ }
+
+ ACPI_DEBUG_PRINT((ACPI_DB_INIT, "ACPI Tables successfully acquired\n"));
+
+ unlock_and_exit:
+ (void)acpi_ut_release_mutex(ACPI_MTX_TABLES);
+ return_ACPI_STATUS(status);
+}
+
+static int __init acpi_no_auto_ssdt_setup(char *s) {
+
+ printk(KERN_NOTICE "ACPI: SSDT auto-load disabled\n");
+
+ no_auto_ssdt = 1;
+
+ return 1;
+}
+
+__setup("acpi_no_auto_ssdt", acpi_no_auto_ssdt_setup);
--
1.7.12.rc0
^ permalink raw reply related
* [PATCH 41/52] ACPICA: Add PCC address space to space ID decode function
From: Len Brown @ 2012-07-25 3:41 UTC (permalink / raw)
To: linux-acpi, linux-pm; +Cc: linux-kernel, Bob Moore, Lin Ming, Len Brown
In-Reply-To: <6af1c4fc5227af65092ebc848989693562bfa3e8.1343187617.git.len.brown@intel.com>
From: Bob Moore <robert.moore@intel.com>
ACPI 5.0 added PCC space ID.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
drivers/acpi/acpica/utdecode.c | 21 +++++++++++----------
1 file changed, 11 insertions(+), 10 deletions(-)
diff --git a/drivers/acpi/acpica/utdecode.c b/drivers/acpi/acpica/utdecode.c
index c8c130c..28134ae 100644
--- a/drivers/acpi/acpica/utdecode.c
+++ b/drivers/acpi/acpica/utdecode.c
@@ -129,16 +129,17 @@ char acpi_ut_hex_to_ascii_char(u64 integer, u32 position)
/* Region type decoding */
const char *acpi_gbl_region_types[ACPI_NUM_PREDEFINED_REGIONS] = {
- "SystemMemory",
- "SystemIO",
- "PCI_Config",
- "EmbeddedControl",
- "SMBus",
- "SystemCMOS",
- "PCIBARTarget",
- "IPMI",
- "GeneralPurposeIo",
- "GenericSerialBus"
+ "SystemMemory", /* 0x00 */
+ "SystemIO", /* 0x01 */
+ "PCI_Config", /* 0x02 */
+ "EmbeddedControl", /* 0x03 */
+ "SMBus", /* 0x04 */
+ "SystemCMOS", /* 0x05 */
+ "PCIBARTarget", /* 0x06 */
+ "IPMI", /* 0x07 */
+ "GeneralPurposeIo", /* 0x08 */
+ "GenericSerialBus", /* 0x09 */
+ "PCC" /* 0x0A */
};
char *acpi_ut_get_region_name(u8 space_id)
--
1.7.12.rc0
^ permalink raw reply related
* [PATCH 40/52] ACPICA: Fix some comment fields
From: Len Brown @ 2012-07-25 3:41 UTC (permalink / raw)
To: linux-acpi, linux-pm; +Cc: linux-kernel, Bob Moore, Lin Ming, Len Brown
In-Reply-To: <6af1c4fc5227af65092ebc848989693562bfa3e8.1343187617.git.len.brown@intel.com>
From: Bob Moore <robert.moore@intel.com>
No functional change. Fixes some typos and linux divergences.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
drivers/acpi/acpica/acmacros.h | 4 ++--
drivers/acpi/acpica/acobject.h | 4 ++--
drivers/acpi/acpica/exprep.c | 4 ++--
drivers/acpi/acpica/exresolv.c | 2 +-
drivers/acpi/acpica/exstore.c | 4 ++--
drivers/acpi/acpica/exutils.c | 2 +-
drivers/acpi/acpica/rscreate.c | 6 +++---
drivers/acpi/acpica/utglobal.c | 5 +++--
drivers/acpi/acpica/utobject.c | 6 +++---
9 files changed, 19 insertions(+), 18 deletions(-)
diff --git a/drivers/acpi/acpica/acmacros.h b/drivers/acpi/acpica/acmacros.h
index f119f47..087b466 100644
--- a/drivers/acpi/acpica/acmacros.h
+++ b/drivers/acpi/acpica/acmacros.h
@@ -283,8 +283,8 @@
#define ACPI_INSERT_BITS(target, mask, source) target = ((target & (~(mask))) | (source & mask))
/*
- * A struct acpi_namespace_node can appear in some contexts
- * where a pointer to a union acpi_operand_object can also
+ * An object of type struct acpi_namespace_node can appear in some contexts
+ * where a pointer to an object of type union acpi_operand_object can also
* appear. This macro is used to distinguish them.
*
* The "Descriptor" field is the first field in both structures.
diff --git a/drivers/acpi/acpica/acobject.h b/drivers/acpi/acpica/acobject.h
index 39a2b84..b85802d 100644
--- a/drivers/acpi/acpica/acobject.h
+++ b/drivers/acpi/acpica/acobject.h
@@ -113,8 +113,8 @@ struct acpi_object_integer {
};
/*
- * Note: The String and Buffer object must be identical through the Pointer
- * and length elements. There is code that depends on this.
+ * Note: The String and Buffer object must be identical through the
+ * pointer and length elements. There is code that depends on this.
*
* Fields common to both Strings and Buffers
*/
diff --git a/drivers/acpi/acpica/exprep.c b/drivers/acpi/acpica/exprep.c
index 30157f5..ae62038 100644
--- a/drivers/acpi/acpica/exprep.c
+++ b/drivers/acpi/acpica/exprep.c
@@ -395,8 +395,8 @@ acpi_ex_prep_common_field_object(union acpi_operand_object *obj_desc,
*
* RETURN: Status
*
- * DESCRIPTION: Construct a union acpi_operand_object of type def_field and
- * connect it to the parent Node.
+ * DESCRIPTION: Construct an object of type union acpi_operand_object with a
+ * subtype of def_field and connect it to the parent Node.
*
******************************************************************************/
diff --git a/drivers/acpi/acpica/exresolv.c b/drivers/acpi/acpica/exresolv.c
index 6e335dc..c6f0ad4 100644
--- a/drivers/acpi/acpica/exresolv.c
+++ b/drivers/acpi/acpica/exresolv.c
@@ -147,7 +147,7 @@ acpi_ex_resolve_object_to_value(union acpi_operand_object **stack_ptr,
stack_desc = *stack_ptr;
- /* This is a union acpi_operand_object */
+ /* This is an object of type union acpi_operand_object */
switch (stack_desc->common.type) {
case ACPI_TYPE_LOCAL_REFERENCE:
diff --git a/drivers/acpi/acpica/exstore.c b/drivers/acpi/acpica/exstore.c
index c6cf843..38c5048 100644
--- a/drivers/acpi/acpica/exstore.c
+++ b/drivers/acpi/acpica/exstore.c
@@ -62,8 +62,8 @@ acpi_ex_store_object_to_index(union acpi_operand_object *val_desc,
* FUNCTION: acpi_ex_store
*
* PARAMETERS: *source_desc - Value to be stored
- * *dest_desc - Where to store it. Must be an NS node
- * or a union acpi_operand_object of type
+ * *dest_desc - Where to store it. Must be an NS node
+ * or union acpi_operand_object of type
* Reference;
* walk_state - Current walk state
*
diff --git a/drivers/acpi/acpica/exutils.c b/drivers/acpi/acpica/exutils.c
index eb6798b..7482400 100644
--- a/drivers/acpi/acpica/exutils.c
+++ b/drivers/acpi/acpica/exutils.c
@@ -109,7 +109,7 @@ void acpi_ex_enter_interpreter(void)
*
* DESCRIPTION: Reacquire the interpreter execution region from within the
* interpreter code. Failure to enter the interpreter region is a
- * fatal system error. Used in conjunction with
+ * fatal system error. Used in conjunction with
* relinquish_interpreter
*
******************************************************************************/
diff --git a/drivers/acpi/acpica/rscreate.c b/drivers/acpi/acpica/rscreate.c
index 46d6eb3..311cbc4 100644
--- a/drivers/acpi/acpica/rscreate.c
+++ b/drivers/acpi/acpica/rscreate.c
@@ -190,8 +190,8 @@ acpi_rs_create_resource_list(union acpi_operand_object *aml_buffer,
*
* FUNCTION: acpi_rs_create_pci_routing_table
*
- * PARAMETERS: package_object - Pointer to a union acpi_operand_object
- * package
+ * PARAMETERS: package_object - Pointer to a package containing one
+ * of more ACPI_OPERAND_OBJECTs
* output_buffer - Pointer to the user's buffer
*
* RETURN: Status AE_OK if okay, else a valid acpi_status code.
@@ -199,7 +199,7 @@ acpi_rs_create_resource_list(union acpi_operand_object *aml_buffer,
* AE_BUFFER_OVERFLOW and output_buffer->Length will point
* to the size buffer needed.
*
- * DESCRIPTION: Takes the union acpi_operand_object package and creates a
+ * DESCRIPTION: Takes the union acpi_operand_object package and creates a
* linked list of PCI interrupt descriptions
*
* NOTE: It is the caller's responsibility to ensure that the start of the
diff --git a/drivers/acpi/acpica/utglobal.c b/drivers/acpi/acpica/utglobal.c
index 78cf1fe..9bd5b4c 100644
--- a/drivers/acpi/acpica/utglobal.c
+++ b/drivers/acpi/acpica/utglobal.c
@@ -247,8 +247,9 @@ struct acpi_fixed_event_info acpi_gbl_fixed_event_info[ACPI_NUM_FIXED_EVENTS] =
*
* RETURN: Status
*
- * DESCRIPTION: Init library globals. All globals that require specific
- * initialization should be initialized here!
+ * DESCRIPTION: Initialize ACPICA globals. All globals that require specific
+ * initialization should be initialized here. This allows for
+ * a warm restart.
*
******************************************************************************/
diff --git a/drivers/acpi/acpica/utobject.c b/drivers/acpi/acpica/utobject.c
index b112744..d0441ca 100644
--- a/drivers/acpi/acpica/utobject.c
+++ b/drivers/acpi/acpica/utobject.c
@@ -327,7 +327,7 @@ union acpi_operand_object *acpi_ut_create_string_object(acpi_size string_size)
*
* RETURN: TRUE if object is valid, FALSE otherwise
*
- * DESCRIPTION: Validate a pointer to be a union acpi_operand_object
+ * DESCRIPTION: Validate a pointer to be of type union acpi_operand_object
*
******************************************************************************/
@@ -348,7 +348,7 @@ u8 acpi_ut_valid_internal_object(void *object)
switch (ACPI_GET_DESCRIPTOR_TYPE(object)) {
case ACPI_DESC_TYPE_OPERAND:
- /* The object appears to be a valid union acpi_operand_object */
+ /* The object appears to be a valid union acpi_operand_object */
return (TRUE);
@@ -419,7 +419,7 @@ void acpi_ut_delete_object_desc(union acpi_operand_object *object)
{
ACPI_FUNCTION_TRACE_PTR(ut_delete_object_desc, object);
- /* Object must be a union acpi_operand_object */
+ /* Object must be a union acpi_operand_object */
if (ACPI_GET_DESCRIPTOR_TYPE(object) != ACPI_DESC_TYPE_OPERAND) {
ACPI_ERROR((AE_INFO,
--
1.7.12.rc0
^ permalink raw reply related
* [PATCH 39/52] ACPICA: Table manager: deploy new firmware error/warning interfaces
From: Len Brown @ 2012-07-25 3:41 UTC (permalink / raw)
To: linux-acpi, linux-pm; +Cc: Len Brown, linux-kernel, Lin Ming, Bob Moore
In-Reply-To: <6af1c4fc5227af65092ebc848989693562bfa3e8.1343187617.git.len.brown@intel.com>
From: Bob Moore <robert.moore@intel.com>
Emit firmware error/warning messages where appropriate for table
and FADT errors.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
drivers/acpi/acpica/tbfadt.c | 102 +++++++++++++++++++++--------------------
drivers/acpi/acpica/tbinstal.c | 15 +++---
drivers/acpi/acpica/tbutils.c | 34 ++++++++------
drivers/acpi/acpica/tbxfroot.c | 2 +-
4 files changed, 80 insertions(+), 73 deletions(-)
diff --git a/drivers/acpi/acpica/tbfadt.c b/drivers/acpi/acpica/tbfadt.c
index d919f40..b3e3fd03 100644
--- a/drivers/acpi/acpica/tbfadt.c
+++ b/drivers/acpi/acpica/tbfadt.c
@@ -303,11 +303,11 @@ void acpi_tb_create_local_fadt(struct acpi_table_header *table, u32 length)
* a warning.
*/
if (length > sizeof(struct acpi_table_fadt)) {
- ACPI_WARNING((AE_INFO,
- "FADT (revision %u) is longer than ACPI 5.0 version, "
- "truncating length %u to %u",
- table->revision, length,
- (u32)sizeof(struct acpi_table_fadt)));
+ ACPI_BIOS_WARNING((AE_INFO,
+ "FADT (revision %u) is longer than ACPI 5.0 version, "
+ "truncating length %u to %u",
+ table->revision, length,
+ (u32)sizeof(struct acpi_table_fadt)));
}
/* Clear the entire local FADT */
@@ -452,11 +452,13 @@ static void acpi_tb_convert_fadt(void)
* they must match.
*/
if (address64->address && address32 &&
- (address64->address != (u64) address32)) {
- ACPI_ERROR((AE_INFO,
- "32/64X address mismatch in %s: 0x%8.8X/0x%8.8X%8.8X, using 32",
- fadt_info_table[i].name, address32,
- ACPI_FORMAT_UINT64(address64->address)));
+ (address64->address != (u64)address32)) {
+ ACPI_BIOS_ERROR((AE_INFO,
+ "32/64X address mismatch in FADT/%s: "
+ "0x%8.8X/0x%8.8X%8.8X, using 32",
+ fadt_info_table[i].name, address32,
+ ACPI_FORMAT_UINT64(address64->
+ address)));
}
/* Always use 32-bit address if it is valid (non-null) */
@@ -511,25 +513,25 @@ static void acpi_tb_validate_fadt(void)
* DSDT/X_DSDT) would indicate the presence of two FACS or two DSDT tables.
*/
if (acpi_gbl_FADT.facs &&
- (acpi_gbl_FADT.Xfacs != (u64) acpi_gbl_FADT.facs)) {
- ACPI_WARNING((AE_INFO,
- "32/64X FACS address mismatch in FADT - "
- "0x%8.8X/0x%8.8X%8.8X, using 32",
- acpi_gbl_FADT.facs,
- ACPI_FORMAT_UINT64(acpi_gbl_FADT.Xfacs)));
-
- acpi_gbl_FADT.Xfacs = (u64) acpi_gbl_FADT.facs;
+ (acpi_gbl_FADT.Xfacs != (u64)acpi_gbl_FADT.facs)) {
+ ACPI_BIOS_WARNING((AE_INFO,
+ "32/64X FACS address mismatch in FADT - "
+ "0x%8.8X/0x%8.8X%8.8X, using 32",
+ acpi_gbl_FADT.facs,
+ ACPI_FORMAT_UINT64(acpi_gbl_FADT.Xfacs)));
+
+ acpi_gbl_FADT.Xfacs = (u64)acpi_gbl_FADT.facs;
}
if (acpi_gbl_FADT.dsdt &&
- (acpi_gbl_FADT.Xdsdt != (u64) acpi_gbl_FADT.dsdt)) {
- ACPI_WARNING((AE_INFO,
- "32/64X DSDT address mismatch in FADT - "
- "0x%8.8X/0x%8.8X%8.8X, using 32",
- acpi_gbl_FADT.dsdt,
- ACPI_FORMAT_UINT64(acpi_gbl_FADT.Xdsdt)));
-
- acpi_gbl_FADT.Xdsdt = (u64) acpi_gbl_FADT.dsdt;
+ (acpi_gbl_FADT.Xdsdt != (u64)acpi_gbl_FADT.dsdt)) {
+ ACPI_BIOS_WARNING((AE_INFO,
+ "32/64X DSDT address mismatch in FADT - "
+ "0x%8.8X/0x%8.8X%8.8X, using 32",
+ acpi_gbl_FADT.dsdt,
+ ACPI_FORMAT_UINT64(acpi_gbl_FADT.Xdsdt)));
+
+ acpi_gbl_FADT.Xdsdt = (u64)acpi_gbl_FADT.dsdt;
}
/* If Hardware Reduced flag is set, we are all done */
@@ -559,10 +561,10 @@ static void acpi_tb_validate_fadt(void)
*/
if (address64->address &&
(address64->bit_width != ACPI_MUL_8(length))) {
- ACPI_WARNING((AE_INFO,
- "32/64X length mismatch in %s: %u/%u",
- name, ACPI_MUL_8(length),
- address64->bit_width));
+ ACPI_BIOS_WARNING((AE_INFO,
+ "32/64X length mismatch in FADT/%s: %u/%u",
+ name, ACPI_MUL_8(length),
+ address64->bit_width));
}
if (fadt_info_table[i].type & ACPI_FADT_REQUIRED) {
@@ -571,13 +573,13 @@ static void acpi_tb_validate_fadt(void)
* Both the address and length must be non-zero.
*/
if (!address64->address || !length) {
- ACPI_ERROR((AE_INFO,
- "Required field %s has zero address and/or length:"
- " 0x%8.8X%8.8X/0x%X",
- name,
- ACPI_FORMAT_UINT64(address64->
- address),
- length));
+ ACPI_BIOS_ERROR((AE_INFO,
+ "Required FADT field %s has zero address and/or length: "
+ "0x%8.8X%8.8X/0x%X",
+ name,
+ ACPI_FORMAT_UINT64(address64->
+ address),
+ length));
}
} else if (fadt_info_table[i].type & ACPI_FADT_SEPARATE_LENGTH) {
/*
@@ -587,13 +589,13 @@ static void acpi_tb_validate_fadt(void)
*/
if ((address64->address && !length) ||
(!address64->address && length)) {
- ACPI_WARNING((AE_INFO,
- "Optional field %s has zero address or length: "
- "0x%8.8X%8.8X/0x%X",
- name,
- ACPI_FORMAT_UINT64(address64->
- address),
- length));
+ ACPI_BIOS_WARNING((AE_INFO,
+ "Optional FADT field %s has zero address or length: "
+ "0x%8.8X%8.8X/0x%X",
+ name,
+ ACPI_FORMAT_UINT64
+ (address64->address),
+ length));
}
}
}
@@ -638,12 +640,12 @@ static void acpi_tb_setup_fadt_registers(void)
(fadt_info_table[i].default_length > 0) &&
(fadt_info_table[i].default_length !=
target64->bit_width)) {
- ACPI_WARNING((AE_INFO,
- "Invalid length for %s: %u, using default %u",
- fadt_info_table[i].name,
- target64->bit_width,
- fadt_info_table[i].
- default_length));
+ ACPI_BIOS_WARNING((AE_INFO,
+ "Invalid length for FADT/%s: %u, using default %u",
+ fadt_info_table[i].name,
+ target64->bit_width,
+ fadt_info_table[i].
+ default_length));
/* Incorrect size, set width to the default */
diff --git a/drivers/acpi/acpica/tbinstal.c b/drivers/acpi/acpica/tbinstal.c
index c03500b..a265d4a 100644
--- a/drivers/acpi/acpica/tbinstal.c
+++ b/drivers/acpi/acpica/tbinstal.c
@@ -138,13 +138,14 @@ acpi_tb_add_table(struct acpi_table_desc *table_desc, u32 *table_index)
if ((table_desc->pointer->signature[0] != 0x00) &&
(!ACPI_COMPARE_NAME(table_desc->pointer->signature, ACPI_SIG_SSDT))
&& (ACPI_STRNCMP(table_desc->pointer->signature, "OEM", 3))) {
- ACPI_ERROR((AE_INFO,
- "Table has invalid signature [%4.4s] (0x%8.8X), must be SSDT or OEMx",
- acpi_ut_valid_acpi_name(*(u32 *)table_desc->
- pointer->
- signature) ? table_desc->
- pointer->signature : "????",
- *(u32 *)table_desc->pointer->signature));
+ ACPI_BIOS_ERROR((AE_INFO,
+ "Table has invalid signature [%4.4s] (0x%8.8X), "
+ "must be SSDT or OEMx",
+ acpi_ut_valid_acpi_name(*(u32 *)table_desc->
+ pointer->
+ signature) ?
+ table_desc->pointer->signature : "????",
+ *(u32 *)table_desc->pointer->signature));
return_ACPI_STATUS(AE_BAD_SIGNATURE);
}
diff --git a/drivers/acpi/acpica/tbutils.c b/drivers/acpi/acpica/tbutils.c
index 0a706ca..6818b31 100644
--- a/drivers/acpi/acpica/tbutils.c
+++ b/drivers/acpi/acpica/tbutils.c
@@ -317,10 +317,11 @@ acpi_status acpi_tb_verify_checksum(struct acpi_table_header *table, u32 length)
/* Checksum ok? (should be zero) */
if (checksum) {
- ACPI_WARNING((AE_INFO,
- "Incorrect checksum in table [%4.4s] - 0x%2.2X, should be 0x%2.2X",
- table->signature, table->checksum,
- (u8) (table->checksum - checksum)));
+ ACPI_BIOS_WARNING((AE_INFO,
+ "Incorrect checksum in table [%4.4s] - 0x%2.2X, "
+ "should be 0x%2.2X",
+ table->signature, table->checksum,
+ (u8)(table->checksum - checksum)));
#if (ACPI_CHECKSUM_ABORT)
@@ -377,8 +378,9 @@ void acpi_tb_check_dsdt_header(void)
if (acpi_gbl_original_dsdt_header.length != acpi_gbl_DSDT->length ||
acpi_gbl_original_dsdt_header.checksum != acpi_gbl_DSDT->checksum) {
- ACPI_ERROR((AE_INFO,
- "The DSDT has been corrupted or replaced - old, new headers below"));
+ ACPI_BIOS_ERROR((AE_INFO,
+ "The DSDT has been corrupted or replaced - "
+ "old, new headers below"));
acpi_tb_print_table_header(0, &acpi_gbl_original_dsdt_header);
acpi_tb_print_table_header(0, acpi_gbl_DSDT);
@@ -480,9 +482,10 @@ acpi_tb_install_table(acpi_physical_address address,
/* If a particular signature is expected (DSDT/FACS), it must match */
if (signature && !ACPI_COMPARE_NAME(table->signature, signature)) {
- ACPI_ERROR((AE_INFO,
- "Invalid signature 0x%X for ACPI table, expected [%s]",
- *ACPI_CAST_PTR(u32, table->signature), signature));
+ ACPI_BIOS_ERROR((AE_INFO,
+ "Invalid signature 0x%X for ACPI table, expected [%s]",
+ *ACPI_CAST_PTR(u32, table->signature),
+ signature));
goto unmap_and_exit;
}
@@ -589,10 +592,10 @@ acpi_tb_get_root_table_entry(u8 *table_entry, u32 table_entry_size)
/* Will truncate 64-bit address to 32 bits, issue warning */
- ACPI_WARNING((AE_INFO,
- "64-bit Physical Address in XSDT is too large (0x%8.8X%8.8X),"
- " truncating",
- ACPI_FORMAT_UINT64(address64)));
+ ACPI_BIOS_WARNING((AE_INFO,
+ "64-bit Physical Address in XSDT is too large (0x%8.8X%8.8X),"
+ " truncating",
+ ACPI_FORMAT_UINT64(address64)));
}
#endif
return ((acpi_physical_address) (address64));
@@ -694,8 +697,9 @@ acpi_tb_parse_root_table(acpi_physical_address rsdp_address)
acpi_os_unmap_memory(table, sizeof(struct acpi_table_header));
if (length < sizeof(struct acpi_table_header)) {
- ACPI_ERROR((AE_INFO, "Invalid length 0x%X in RSDT/XSDT",
- length));
+ ACPI_BIOS_ERROR((AE_INFO,
+ "Invalid table length 0x%X in RSDT/XSDT",
+ length));
return_ACPI_STATUS(AE_INVALID_TABLE_LENGTH);
}
diff --git a/drivers/acpi/acpica/tbxfroot.c b/drivers/acpi/acpica/tbxfroot.c
index 4258f64..5f6f744 100644
--- a/drivers/acpi/acpica/tbxfroot.c
+++ b/drivers/acpi/acpica/tbxfroot.c
@@ -216,7 +216,7 @@ acpi_status acpi_find_root_pointer(acpi_size *table_address)
/* A valid RSDP was not found */
- ACPI_ERROR((AE_INFO, "A valid RSDP was not found"));
+ ACPI_BIOS_ERROR((AE_INFO, "A valid RSDP was not found"));
return_ACPI_STATUS(AE_NOT_FOUND);
}
--
1.7.12.rc0
^ permalink raw reply related
* [PATCH 38/52] ACPICA: Add new interfaces for BIOS(firmware) errors and warnings
From: Len Brown @ 2012-07-25 3:41 UTC (permalink / raw)
To: linux-acpi, linux-pm; +Cc: Len Brown, linux-kernel, Lin Ming, Bob Moore
In-Reply-To: <6af1c4fc5227af65092ebc848989693562bfa3e8.1343187617.git.len.brown@intel.com>
From: Bob Moore <robert.moore@intel.com>
These new interfaces will be deployed across ACPICA in order to
point a finger directly at any detected BIOS issues -- such as
issues with ACPI tables, etc.
https://www.acpica.org/bugzilla/show_bug.cgi?id=843
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
drivers/acpi/acpica/utxferror.c | 68 +++++++++++++++++++++++++++++++++++++++++
include/acpi/acoutput.h | 4 +++
include/acpi/acpixf.h | 8 +++++
3 files changed, 80 insertions(+)
diff --git a/drivers/acpi/acpica/utxferror.c b/drivers/acpi/acpica/utxferror.c
index 52b568a..87aaddf 100644
--- a/drivers/acpi/acpica/utxferror.c
+++ b/drivers/acpi/acpica/utxferror.c
@@ -82,6 +82,8 @@ extern FILE *acpi_gbl_output_file;
#define ACPI_MSG_EXCEPTION "ACPI Exception: "
#define ACPI_MSG_WARNING "ACPI Warning: "
#define ACPI_MSG_INFO "ACPI: "
+#define ACPI_MSG_BIOS_ERROR "ACPI BIOS Bug: Error: "
+#define ACPI_MSG_BIOS_WARNING "ACPI BIOS Bug: Warning: "
/*
* Common message suffix
*/
@@ -218,6 +220,72 @@ acpi_info(const char *module_name, u32 line_number, const char *format, ...)
ACPI_EXPORT_SYMBOL(acpi_info)
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_bios_error
+ *
+ * PARAMETERS: module_name - Caller's module name (for error output)
+ * line_number - Caller's line number (for error output)
+ * format - Printf format string + additional args
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Print "ACPI Firmware Error" message with module/line/version
+ * info
+ *
+ ******************************************************************************/
+void ACPI_INTERNAL_VAR_XFACE
+acpi_bios_error(const char *module_name,
+ u32 line_number, const char *format, ...)
+{
+ va_list arg_list;
+
+ ACPI_MSG_REDIRECT_BEGIN;
+ acpi_os_printf(ACPI_MSG_BIOS_ERROR);
+
+ va_start(arg_list, format);
+ acpi_os_vprintf(format, arg_list);
+ ACPI_MSG_SUFFIX;
+ va_end(arg_list);
+
+ ACPI_MSG_REDIRECT_END;
+}
+
+ACPI_EXPORT_SYMBOL(acpi_bios_error)
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_bios_warning
+ *
+ * PARAMETERS: module_name - Caller's module name (for error output)
+ * line_number - Caller's line number (for error output)
+ * format - Printf format string + additional args
+ *
+ * RETURN: None
+ *
+ * DESCRIPTION: Print "ACPI Firmware Warning" message with module/line/version
+ * info
+ *
+ ******************************************************************************/
+void ACPI_INTERNAL_VAR_XFACE
+acpi_bios_warning(const char *module_name,
+ u32 line_number, const char *format, ...)
+{
+ va_list arg_list;
+
+ ACPI_MSG_REDIRECT_BEGIN;
+ acpi_os_printf(ACPI_MSG_BIOS_WARNING);
+
+ va_start(arg_list, format);
+ acpi_os_vprintf(format, arg_list);
+ ACPI_MSG_SUFFIX;
+ va_end(arg_list);
+
+ ACPI_MSG_REDIRECT_END;
+}
+
+ACPI_EXPORT_SYMBOL(acpi_bios_warning)
+
/*
* The remainder of this module contains internal error functions that may
* be configured out.
diff --git a/include/acpi/acoutput.h b/include/acpi/acoutput.h
index d7bd661..f1cb332 100644
--- a/include/acpi/acoutput.h
+++ b/include/acpi/acoutput.h
@@ -213,6 +213,8 @@
#define ACPI_WARNING(plist) acpi_warning plist
#define ACPI_EXCEPTION(plist) acpi_exception plist
#define ACPI_ERROR(plist) acpi_error plist
+#define ACPI_BIOS_WARNING(plist) acpi_bios_warning plist
+#define ACPI_BIOS_ERROR(plist) acpi_bios_error plist
#define ACPI_DEBUG_OBJECT(obj,l,i) acpi_ex_do_debug_object(obj,l,i)
#else
@@ -223,6 +225,8 @@
#define ACPI_WARNING(plist)
#define ACPI_EXCEPTION(plist)
#define ACPI_ERROR(plist)
+#define ACPI_BIOS_WARNING(plist)
+#define ACPI_BIOS_ERROR(plist)
#define ACPI_DEBUG_OBJECT(obj,l,i)
#endif /* ACPI_NO_ERROR_MESSAGES */
diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h
index 18f023a..8f83f95 100644
--- a/include/acpi/acpixf.h
+++ b/include/acpi/acpixf.h
@@ -529,6 +529,14 @@ void ACPI_INTERNAL_VAR_XFACE
acpi_info(const char *module_name,
u32 line_number, const char *format, ...) ACPI_PRINTF_LIKE(3);
+void ACPI_INTERNAL_VAR_XFACE
+acpi_bios_error(const char *module_name,
+ u32 line_number, const char *format, ...) ACPI_PRINTF_LIKE(3);
+
+void ACPI_INTERNAL_VAR_XFACE
+acpi_bios_warning(const char *module_name,
+ u32 line_number, const char *format, ...) ACPI_PRINTF_LIKE(3);
+
/*
* Debug output
*/
--
1.7.12.rc0
^ permalink raw reply related
* [PATCH 37/52] ACPICA: Split exception code utilities to a new file, utexcep.c
From: Len Brown @ 2012-07-25 3:41 UTC (permalink / raw)
To: linux-acpi, linux-pm; +Cc: linux-kernel, Bob Moore, Lin Ming, Len Brown
In-Reply-To: <6af1c4fc5227af65092ebc848989693562bfa3e8.1343187617.git.len.brown@intel.com>
From: Bob Moore <robert.moore@intel.com>
Simplifies sharing of these functions.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
drivers/acpi/acpica/Makefile | 1 +
drivers/acpi/acpica/acglobal.h | 8 ---
drivers/acpi/acpica/utdecode.c | 35 ----------
drivers/acpi/acpica/utexcep.c | 153 +++++++++++++++++++++++++++++++++++++++++
drivers/acpi/acpica/utmisc.c | 69 -------------------
include/acpi/acexcep.h | 5 +-
6 files changed, 157 insertions(+), 114 deletions(-)
create mode 100644 drivers/acpi/acpica/utexcep.c
diff --git a/drivers/acpi/acpica/Makefile b/drivers/acpi/acpica/Makefile
index 793b8cc..fa9a7d5 100644
--- a/drivers/acpi/acpica/Makefile
+++ b/drivers/acpi/acpica/Makefile
@@ -140,6 +140,7 @@ acpi-y += \
utaddress.o \
utalloc.o \
utcopy.o \
+ utexcep.o \
utdebug.o \
utdecode.o \
utdelete.o \
diff --git a/drivers/acpi/acpica/acglobal.h b/drivers/acpi/acpica/acglobal.h
index 92fab6a..ce79100 100644
--- a/drivers/acpi/acpica/acglobal.h
+++ b/drivers/acpi/acpica/acglobal.h
@@ -326,14 +326,6 @@ extern const char *acpi_gbl_region_types[ACPI_NUM_PREDEFINED_REGIONS];
#endif
-/* Exception codes */
-
-extern char const *acpi_gbl_exception_names_env[];
-extern char const *acpi_gbl_exception_names_pgm[];
-extern char const *acpi_gbl_exception_names_tbl[];
-extern char const *acpi_gbl_exception_names_aml[];
-extern char const *acpi_gbl_exception_names_ctrl[];
-
/*****************************************************************************
*
* Namespace globals
diff --git a/drivers/acpi/acpica/utdecode.c b/drivers/acpi/acpica/utdecode.c
index 6848499..c8c130c 100644
--- a/drivers/acpi/acpica/utdecode.c
+++ b/drivers/acpi/acpica/utdecode.c
@@ -49,41 +49,6 @@
#define _COMPONENT ACPI_UTILITIES
ACPI_MODULE_NAME("utdecode")
-/*******************************************************************************
- *
- * FUNCTION: acpi_format_exception
- *
- * PARAMETERS: Status - The acpi_status code to be formatted
- *
- * RETURN: A string containing the exception text. A valid pointer is
- * always returned.
- *
- * DESCRIPTION: This function translates an ACPI exception into an ASCII string
- * It is here instead of utxface.c so it is always present.
- *
- ******************************************************************************/
-const char *acpi_format_exception(acpi_status status)
-{
- const char *exception = NULL;
-
- ACPI_FUNCTION_ENTRY();
-
- exception = acpi_ut_validate_exception(status);
- if (!exception) {
-
- /* Exception code was not recognized */
-
- ACPI_ERROR((AE_INFO,
- "Unknown exception code: 0x%8.8X", status));
-
- exception = "UNKNOWN_STATUS_CODE";
- }
-
- return (ACPI_CAST_PTR(const char, exception));
-}
-
-ACPI_EXPORT_SYMBOL(acpi_format_exception)
-
/*
* Properties of the ACPI Object Types, both internal and external.
* The table is indexed by values of acpi_object_type
diff --git a/drivers/acpi/acpica/utexcep.c b/drivers/acpi/acpica/utexcep.c
new file mode 100644
index 0000000..23b9894
--- /dev/null
+++ b/drivers/acpi/acpica/utexcep.c
@@ -0,0 +1,153 @@
+/*******************************************************************************
+ *
+ * Module Name: utexcep - Exception code support
+ *
+ ******************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2012, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions, and the following disclaimer,
+ * without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ * substantially similar to the "NO WARRANTY" disclaimer below
+ * ("Disclaimer") and any redistribution must be conditioned upon
+ * including a substantially similar Disclaimer requirement for further
+ * binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ * of any contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#define ACPI_DEFINE_EXCEPTION_TABLE
+#include <linux/export.h>
+#include <acpi/acpi.h>
+#include "accommon.h"
+
+#define _COMPONENT ACPI_UTILITIES
+ACPI_MODULE_NAME("utexcep")
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_format_exception
+ *
+ * PARAMETERS: status - The acpi_status code to be formatted
+ *
+ * RETURN: A string containing the exception text. A valid pointer is
+ * always returned.
+ *
+ * DESCRIPTION: This function translates an ACPI exception into an ASCII
+ * string. Returns "unknown status" string for invalid codes.
+ *
+ ******************************************************************************/
+const char *acpi_format_exception(acpi_status status)
+{
+ const char *exception = NULL;
+
+ ACPI_FUNCTION_ENTRY();
+
+ exception = acpi_ut_validate_exception(status);
+ if (!exception) {
+
+ /* Exception code was not recognized */
+
+ ACPI_ERROR((AE_INFO,
+ "Unknown exception code: 0x%8.8X", status));
+
+ exception = "UNKNOWN_STATUS_CODE";
+ }
+
+ return (ACPI_CAST_PTR(const char, exception));
+}
+
+ACPI_EXPORT_SYMBOL(acpi_format_exception)
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ut_validate_exception
+ *
+ * PARAMETERS: status - The acpi_status code to be formatted
+ *
+ * RETURN: A string containing the exception text. NULL if exception is
+ * not valid.
+ *
+ * DESCRIPTION: This function validates and translates an ACPI exception into
+ * an ASCII string.
+ *
+ ******************************************************************************/
+const char *acpi_ut_validate_exception(acpi_status status)
+{
+ u32 sub_status;
+ const char *exception = NULL;
+
+ ACPI_FUNCTION_ENTRY();
+
+ /*
+ * Status is composed of two parts, a "type" and an actual code
+ */
+ sub_status = (status & ~AE_CODE_MASK);
+
+ switch (status & AE_CODE_MASK) {
+ case AE_CODE_ENVIRONMENTAL:
+
+ if (sub_status <= AE_CODE_ENV_MAX) {
+ exception = acpi_gbl_exception_names_env[sub_status];
+ }
+ break;
+
+ case AE_CODE_PROGRAMMER:
+
+ if (sub_status <= AE_CODE_PGM_MAX) {
+ exception = acpi_gbl_exception_names_pgm[sub_status];
+ }
+ break;
+
+ case AE_CODE_ACPI_TABLES:
+
+ if (sub_status <= AE_CODE_TBL_MAX) {
+ exception = acpi_gbl_exception_names_tbl[sub_status];
+ }
+ break;
+
+ case AE_CODE_AML:
+
+ if (sub_status <= AE_CODE_AML_MAX) {
+ exception = acpi_gbl_exception_names_aml[sub_status];
+ }
+ break;
+
+ case AE_CODE_CONTROL:
+
+ if (sub_status <= AE_CODE_CTRL_MAX) {
+ exception = acpi_gbl_exception_names_ctrl[sub_status];
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ return (ACPI_CAST_PTR(const char, exception));
+}
diff --git a/drivers/acpi/acpica/utmisc.c b/drivers/acpi/acpica/utmisc.c
index 577a44e..e30c060 100644
--- a/drivers/acpi/acpica/utmisc.c
+++ b/drivers/acpi/acpica/utmisc.c
@@ -82,75 +82,6 @@ void ut_convert_backslashes(char *pathname)
/*******************************************************************************
*
- * FUNCTION: acpi_ut_validate_exception
- *
- * PARAMETERS: Status - The acpi_status code to be formatted
- *
- * RETURN: A string containing the exception text. NULL if exception is
- * not valid.
- *
- * DESCRIPTION: This function validates and translates an ACPI exception into
- * an ASCII string.
- *
- ******************************************************************************/
-
-const char *acpi_ut_validate_exception(acpi_status status)
-{
- u32 sub_status;
- const char *exception = NULL;
-
- ACPI_FUNCTION_ENTRY();
-
- /*
- * Status is composed of two parts, a "type" and an actual code
- */
- sub_status = (status & ~AE_CODE_MASK);
-
- switch (status & AE_CODE_MASK) {
- case AE_CODE_ENVIRONMENTAL:
-
- if (sub_status <= AE_CODE_ENV_MAX) {
- exception = acpi_gbl_exception_names_env[sub_status];
- }
- break;
-
- case AE_CODE_PROGRAMMER:
-
- if (sub_status <= AE_CODE_PGM_MAX) {
- exception = acpi_gbl_exception_names_pgm[sub_status];
- }
- break;
-
- case AE_CODE_ACPI_TABLES:
-
- if (sub_status <= AE_CODE_TBL_MAX) {
- exception = acpi_gbl_exception_names_tbl[sub_status];
- }
- break;
-
- case AE_CODE_AML:
-
- if (sub_status <= AE_CODE_AML_MAX) {
- exception = acpi_gbl_exception_names_aml[sub_status];
- }
- break;
-
- case AE_CODE_CONTROL:
-
- if (sub_status <= AE_CODE_CTRL_MAX) {
- exception = acpi_gbl_exception_names_ctrl[sub_status];
- }
- break;
-
- default:
- break;
- }
-
- return (ACPI_CAST_PTR(const char, exception));
-}
-
-/*******************************************************************************
- *
* FUNCTION: acpi_ut_is_pci_root_bridge
*
* PARAMETERS: Id - The HID/CID in string format
diff --git a/include/acpi/acexcep.h b/include/acpi/acexcep.h
index 92d6e1d..0b5dcb6 100644
--- a/include/acpi/acexcep.h
+++ b/include/acpi/acexcep.h
@@ -52,6 +52,7 @@
#define AE_CODE_ACPI_TABLES 0x2000
#define AE_CODE_AML 0x3000
#define AE_CODE_CONTROL 0x4000
+#define AE_CODE_MAX 0x4000
#define AE_CODE_MASK 0xF000
#define ACPI_SUCCESS(a) (!(a))
@@ -181,7 +182,7 @@
/* Exception strings for acpi_format_exception */
-#ifdef DEFINE_ACPI_GLOBALS
+#ifdef ACPI_DEFINE_EXCEPTION_TABLE
/*
* String versions of the exception codes above
@@ -295,6 +296,6 @@ char const *acpi_gbl_exception_names_ctrl[] = {
"AE_CTRL_PARSE_PENDING"
};
-#endif /* ACPI GLOBALS */
+#endif /* EXCEPTION_TABLE */
#endif /* __ACEXCEP_H__ */
--
1.7.12.rc0
^ permalink raw reply related
* [PATCH 36/52] ACPI: acpi_pad: tune round_robin_time
From: Len Brown @ 2012-07-25 3:41 UTC (permalink / raw)
To: linux-acpi, linux-pm; +Cc: linux-kernel, Len Brown
In-Reply-To: <6af1c4fc5227af65092ebc848989693562bfa3e8.1343187617.git.len.brown@intel.com>
From: Len Brown <len.brown@intel.com>
In an effort to be fair to bound processes,
acpi_pad periodically moves its forced-idle threads.
The default interval for moving the threads is 10 seconds.
Measurements show that reducing this to 1 second has no
power or performance impact, so reduce default to 1 second.
Signed-off-by: Len Brown <len.brown@intel.com>
---
drivers/acpi/acpi_pad.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/acpi/acpi_pad.c b/drivers/acpi/acpi_pad.c
index 1c09e1b..f3e959f 100644
--- a/drivers/acpi/acpi_pad.c
+++ b/drivers/acpi/acpi_pad.c
@@ -144,7 +144,7 @@ static void exit_round_robin(unsigned int tsk_index)
}
static unsigned int idle_pct = 5; /* percentage */
-static unsigned int round_robin_time = 10; /* second */
+static unsigned int round_robin_time = 1; /* second */
static int power_saving_thread(void *data)
{
struct sched_param param = {.sched_priority = 1};
--
1.7.12.rc0
^ permalink raw reply related
* [PATCH 35/52] ACPICA: Update to version 20120620
From: Len Brown @ 2012-07-25 3:41 UTC (permalink / raw)
To: linux-acpi, linux-pm; +Cc: linux-kernel, Bob Moore, Lin Ming, Len Brown
In-Reply-To: <6af1c4fc5227af65092ebc848989693562bfa3e8.1343187617.git.len.brown@intel.com>
From: Bob Moore <robert.moore@intel.com>
Version 20120620.
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Lin Ming <ming.m.lin@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
---
include/acpi/acpixf.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h
index 381c940..18f023a 100644
--- a/include/acpi/acpixf.h
+++ b/include/acpi/acpixf.h
@@ -47,7 +47,7 @@
/* Current ACPICA subsystem version in YYYYMMDD format */
-#define ACPI_CA_VERSION 0x20120518
+#define ACPI_CA_VERSION 0x20120620
#include "acconfig.h"
#include "actypes.h"
--
1.7.12.rc0
^ permalink raw reply related
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox