* [k.org requests #104] Please add 2 categories
From: Konstantin Ryabitsev via RT @ 2012-10-30 15:24 UTC (permalink / raw)
To: lenb; +Cc: linux-pm
In-Reply-To: <508F40D5.2010109@kernel.org>
On Tue Oct 30 15:10:36 2012, lenb@kernel.org wrote:
> Dear Bugzilla Admins,
>
> Please add 2 additional Categories under Product "Power Management":
>
> Run-Time-PM - Issues related to Linux Device Run Time Power
> Management.
>
> Thermal - Issues related to OS-visible Thermal Management, such as
> throttling.
Sure, but I'll need "default assignee" for both of these.
Speaking of default assignees, kernel-bugs.osdl.org doesn't appear to
exist any more either, so the following will need to be adjusted as well:
cpuidle power-management_cpuidle@kernel-bugs.osdl.org
Hibernation/Suspend power-management_other@kernel-bugs.osdl.org
intel_idle power-management_intel_idle@kernel-bugs.osdl.org
Other power-management_other@kernel-bugs.osdl.org
Best,
--
Konstantin Ryabitsev
Systems Administrator
Linux Foundation, kernel.org
Montréal, Québec
^ permalink raw reply
* [k.org requests #104] Please add 2 categories
From: Konstantin Ryabitsev via RT @ 2012-10-30 15:24 UTC (permalink / raw)
Cc: linux-pm
In-Reply-To: <508F40D5.2010109@kernel.org>
On Tue Oct 30 15:10:36 2012, lenb@kernel.org wrote:
> Dear Bugzilla Admins,
>
> Please add 2 additional Categories under Product "Power Management":
>
> Run-Time-PM - Issues related to Linux Device Run Time Power
> Management.
>
> Thermal - Issues related to OS-visible Thermal Management, such as
> throttling.
Sure, but I'll need "default assignee" for both of these.
Speaking of default assignees, kernel-bugs.osdl.org doesn't appear to
exist any more either, so the following will need to be adjusted as well:
cpuidle power-management_cpuidle@kernel-bugs.osdl.org
Hibernation/Suspend power-management_other@kernel-bugs.osdl.org
intel_idle power-management_intel_idle@kernel-bugs.osdl.org
Other power-management_other@kernel-bugs.osdl.org
Best,
--
Konstantin Ryabitsev
Systems Administrator
Linux Foundation, kernel.org
Montréal, Québec
^ permalink raw reply
* Re: [PATCH 5/7] ACPI / PM: Provide device PM functions operating on struct acpi_device
From: Rafael J. Wysocki @ 2012-10-30 15:20 UTC (permalink / raw)
To: Aaron Lu
Cc: Linux PM list, ACPI Devel Maling List, Huang Ying, LKML,
Len Brown, Lv Zheng, Adrian Hunter
In-Reply-To: <20121030072844.GA6154@aaronlu.sh.intel.com>
On Tuesday, October 30, 2012 03:28:45 PM Aaron Lu wrote:
> On Mon, Oct 29, 2012 at 10:11:20AM +0100, Rafael J. Wysocki wrote:
> > From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> >
> > If the caller of acpi_bus_set_power() already has a pointer to the
> > struct acpi_device object corresponding to the device in question, it
> > doesn't make sense for it to go through acpi_bus_get_device(), which
> > may be costly, because it involves acquiring the global ACPI
> > namespace mutex.
> >
> > For this reason, export the function operating on struct acpi_device
> > objects used internally by acpi_bus_set_power(), so that it may be
> > called instead of acpi_bus_set_power() in the above case, and change
> > its name to acpi_device_set_power().
> >
> > Additionally, introduce two inline wrappers for checking ACPI PM
> > capabilities of devices represented by struct acpi_device objects.
>
> What about adding yet another wrapper to check power off capability of
> the device? If device has _PS3 or _PRx, it means the device can be
> powered off from ACPI's perspective. This is useful for ZPODD when
> deciding if platform has the required ability to support it.
Sure, no problem with that. Perhaps you can cut a patch for that
on top of this series?
Rafael
> > Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> > ---
> > drivers/acpi/bus.c | 15 ++++++++++++---
> > include/acpi/acpi_bus.h | 11 +++++++++++
> > 2 files changed, 23 insertions(+), 3 deletions(-)
> >
> > Index: linux/drivers/acpi/bus.c
> > ===================================================================
> > --- linux.orig/drivers/acpi/bus.c
> > +++ linux/drivers/acpi/bus.c
> > @@ -257,7 +257,15 @@ static int __acpi_bus_get_power(struct a
> > }
> >
> >
> > -static int __acpi_bus_set_power(struct acpi_device *device, int state)
> > +/**
> > + * acpi_device_set_power - Set power state of an ACPI device.
> > + * @device: Device to set the power state of.
> > + * @state: New power state to set.
> > + *
> > + * Callers must ensure that the device is power manageable before using this
> > + * function.
> > + */
> > +int acpi_device_set_power(struct acpi_device *device, int state)
> > {
> > int result = 0;
> > acpi_status status = AE_OK;
> > @@ -341,6 +349,7 @@ static int __acpi_bus_set_power(struct a
> >
> > return result;
> > }
> > +EXPORT_SYMBOL(acpi_device_set_power);
> >
> >
> > int acpi_bus_set_power(acpi_handle handle, int state)
> > @@ -359,7 +368,7 @@ int acpi_bus_set_power(acpi_handle handl
> > return -ENODEV;
> > }
> >
> > - return __acpi_bus_set_power(device, state);
> > + return acpi_device_set_power(device, state);
> > }
> > EXPORT_SYMBOL(acpi_bus_set_power);
> >
> > @@ -402,7 +411,7 @@ int acpi_bus_update_power(acpi_handle ha
> > if (result)
> > return result;
> >
> > - result = __acpi_bus_set_power(device, state);
> > + result = acpi_device_set_power(device, state);
> > if (!result && state_p)
> > *state_p = state;
> >
> > Index: linux/include/acpi/acpi_bus.h
> > ===================================================================
> > --- linux.orig/include/acpi/acpi_bus.h
> > +++ linux/include/acpi/acpi_bus.h
> > @@ -338,6 +338,7 @@ acpi_status acpi_bus_get_status_handle(a
> > unsigned long long *sta);
> > int acpi_bus_get_status(struct acpi_device *device);
> > int acpi_bus_set_power(acpi_handle handle, int state);
> > +int acpi_device_set_power(struct acpi_device *device, int state);
> > int acpi_bus_update_power(acpi_handle handle, int *state_p);
> > bool acpi_bus_power_manageable(acpi_handle handle);
> > bool acpi_bus_can_wakeup(acpi_handle handle);
> > @@ -482,6 +483,16 @@ static inline int acpi_pm_device_sleep_w
> > }
> > #endif
> >
> > +static inline bool acpi_device_power_manageable(struct acpi_device *adev)
> > +{
> > + return adev->flags.power_manageable;
> > +}
> > +
> > +static inline bool acpi_device_can_wakeup(struct acpi_device *adev)
> > +{
> > + return adev->wakeup.flags.valid;
> > +}
> > +
> > #else /* CONFIG_ACPI */
> >
> > static inline int register_acpi_bus_type(void *bus) { return 0; }
> >
> --
> To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.
^ permalink raw reply
* Re: [PATCH] saa7134: Add pm_qos_request to fix video corruption
From: Alan Stern @ 2012-10-30 15:11 UTC (permalink / raw)
To: Simon Farnsworth; +Cc: Mauro Carvalho Chehab, Andy Walls, linux-media, linux-pm
In-Reply-To: <2614655.PC7gBWDYxH@f17simon>
On Mon, 29 Oct 2012, Simon Farnsworth wrote:
> On Monday 29 October 2012 13:44:45 Mauro Carvalho Chehab wrote:
> > Thanks for digging into it and getting more data. Do you know if this change
> > it also needed with USB devices that do DMA (isoc and/or bulk)? Or the USB
> > core already handles that?
> >
> I'm not a huge expert - the linux-pm list (cc'd) will have people around who
> know more.
>
> If I've understood correctly, though, the USB core should take care of pm_qos
> requests if they're needed for the hardware; remember that if the HCD has
> enough buffering, there's no need for a pm_qos request.
The USB core is not PM-QOS aware. It relies on the PM core to tell it
when devices may safely be runtime-suspended.
Alan Stern
^ permalink raw reply
* Re: Linux 3.7-rc3
From: Michal Hocko @ 2012-10-30 12:53 UTC (permalink / raw)
To: Jiri Kosina
Cc: Rafael J. Wysocki, Linux Kernel Mailing List, Linus Torvalds,
Linux PM list, Greg Kroah-Hartman
In-Reply-To: <alpine.LRH.2.00.1210301048390.10392@twin.jikos.cz>
[-- Attachment #1: Type: text/plain, Size: 2007 bytes --]
On Tue 30-10-12 10:50:50, Jiri Kosina wrote:
> On Tue, 30 Oct 2012, Rafael J. Wysocki wrote:
>
> > > Nothing particularly stands out here. Lots of small fixes, exemplified
> > > by the series of memory leak fixes in usb serial drivers. Just a lot
> > > of random stuff..
> > >
> > > Most of it is drivers (all over: drm, wireless, staging, usb, sound),
> > > but there's a few filesystem updates (nfs, btrfs, ext4), arch updates
> > > (arm, x86 and m68k) and just random stuff. Shortlog appended.
> >
> > Unfortunately, s2disk is broken with this one and previous -rc. In the
> > majority of cases it just hangs the machine during hibernation, although
> > sometimes it returns to user space reporting freezing problems, suspicions
> > RCU usage and similar stuff, pretty much without any useful debug information.
Which RCU config options you have enabled?
> > I'm quite confident that v3.6 was OK (and -stable based on that too), so
> > it most likely is a recent regression. The in-kernel hibernation
> > (ie. "echo disk > /sys/power/state") works no problem. So does suspend to
> > RAM on my test boxes.
> >
> > So far I have been able to reproduce this 100% of the time on two machines
> > with Intel CPUs and graphics driven by i915. I _suspect_ that this may be
> > related to VT switching, because s2disk does some ugly things in that area
> > which are not done by the in-kernel code. Dunno.
> >
> > Anyway, it looks like nothing short of bisection is going to help debug this,
> > but I'm afraid I won't have the time to bisect within the next two weeks, so if
> > anyone can reproduce this issue and will be able to bisect it, please help
> > (openSUSE/Tumbleweed users anyone?).
>
> Just a data point here -- this is probably not generally true.
>
> I am using s2disk very often on my x200s, and I haven't hit this problem
> so far (currently running 2ab3f29, i.e. slightly before rc3).
No problem for me either. Runnning rc3. See the config attached.
--
Michal Hocko
SUSE Labs
[-- Attachment #2: config-3.7.0-rc3 --]
[-- Type: text/plain, Size: 76568 bytes --]
#
# Automatically generated file; DO NOT EDIT.
# Linux/x86_64 3.7.0-rc3 Kernel Configuration
#
CONFIG_64BIT=y
CONFIG_X86_64=y
CONFIG_X86=y
CONFIG_INSTRUCTION_DECODER=y
CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_MMU=y
CONFIG_NEED_DMA_MAP_STATE=y
CONFIG_NEED_SG_DMA_LENGTH=y
CONFIG_GENERIC_ISA_DMA=y
CONFIG_GENERIC_BUG=y
CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_ARCH_HAS_CPU_RELAX=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_ARCH_HAS_CPU_AUTOPROBE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y
CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ZONE_DMA32=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
CONFIG_ARCH_HWEIGHT_CFLAGS="-fcall-saved-rdi -fcall-saved-rsi -fcall-saved-rdx -fcall-saved-rcx -fcall-saved-r8 -fcall-saved-r9 -fcall-saved-r10 -fcall-saved-r11"
CONFIG_ARCH_CPU_PROBE_RELEASE=y
CONFIG_ARCH_SUPPORTS_UPROBES=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_HAVE_IRQ_WORK=y
CONFIG_IRQ_WORK=y
CONFIG_BUILDTIME_EXTABLE_SORT=y
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_CROSS_COMPILE=""
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_HAVE_KERNEL_GZIP=y
CONFIG_HAVE_KERNEL_BZIP2=y
CONFIG_HAVE_KERNEL_LZMA=y
CONFIG_HAVE_KERNEL_XZ=y
CONFIG_HAVE_KERNEL_LZO=y
CONFIG_KERNEL_GZIP=y
# CONFIG_KERNEL_BZIP2 is not set
# CONFIG_KERNEL_LZMA is not set
# CONFIG_KERNEL_XZ is not set
# CONFIG_KERNEL_LZO is not set
CONFIG_DEFAULT_HOSTNAME="(none)"
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_FHANDLE is not set
# CONFIG_AUDIT is not set
CONFIG_HAVE_GENERIC_HARDIRQS=y
#
# IRQ subsystem
#
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_IRQ_SHOW=y
CONFIG_GENERIC_PENDING_IRQ=y
CONFIG_IRQ_FORCED_THREADING=y
CONFIG_SPARSE_IRQ=y
CONFIG_CLOCKSOURCE_WATCHDOG=y
CONFIG_ARCH_CLOCKSOURCE_DATA=y
CONFIG_GENERIC_TIME_VSYSCALL=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y
CONFIG_GENERIC_CMOS_UPDATE=y
#
# Timers subsystem
#
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
#
# CPU/Task time and stats accounting
#
CONFIG_TICK_CPU_ACCOUNTING=y
# CONFIG_IRQ_TIME_ACCOUNTING is not set
# CONFIG_BSD_PROCESS_ACCT is not set
CONFIG_TASKSTATS=y
CONFIG_TASK_DELAY_ACCT=y
CONFIG_TASK_XACCT=y
CONFIG_TASK_IO_ACCOUNTING=y
#
# RCU Subsystem
#
CONFIG_TREE_PREEMPT_RCU=y
CONFIG_PREEMPT_RCU=y
# CONFIG_RCU_USER_QS is not set
CONFIG_RCU_FANOUT=32
CONFIG_RCU_FANOUT_LEAF=16
# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_RCU_FAST_NO_HZ is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_RCU_BOOST is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=18
CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y
CONFIG_CGROUPS=y
# CONFIG_CGROUP_DEBUG is not set
# CONFIG_CGROUP_FREEZER is not set
# CONFIG_CGROUP_DEVICE is not set
# CONFIG_CPUSETS is not set
# CONFIG_CGROUP_CPUACCT is not set
CONFIG_RESOURCE_COUNTERS=y
CONFIG_MEMCG=y
CONFIG_MEMCG_SWAP=y
CONFIG_MEMCG_SWAP_ENABLED=y
CONFIG_MEMCG_KMEM=y
# CONFIG_CGROUP_HUGETLB is not set
# CONFIG_CGROUP_PERF is not set
CONFIG_CGROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_CFS_BANDWIDTH is not set
CONFIG_RT_GROUP_SCHED=y
# CONFIG_BLK_CGROUP is not set
# CONFIG_CHECKPOINT_RESTORE is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
# CONFIG_IPC_NS is not set
# CONFIG_PID_NS is not set
# CONFIG_NET_NS is not set
CONFIG_SCHED_AUTOGROUP=y
CONFIG_MM_OWNER=y
# CONFIG_SYSFS_DEPRECATED is not set
CONFIG_RELAY=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
CONFIG_RD_GZIP=y
CONFIG_RD_BZIP2=y
CONFIG_RD_LZMA=y
CONFIG_RD_XZ=y
CONFIG_RD_LZO=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
# CONFIG_EXPERT is not set
CONFIG_HAVE_UID16=y
CONFIG_UID16=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_SYSCTL_EXCEPTION_TRACE=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
CONFIG_HAVE_PCSPKR_PLATFORM=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_EMBEDDED is not set
CONFIG_HAVE_PERF_EVENTS=y
#
# Kernel Performance Events And Counters
#
CONFIG_PERF_EVENTS=y
# CONFIG_DEBUG_PERF_USE_VMALLOC is not set
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
CONFIG_PROFILING=y
CONFIG_TRACEPOINTS=y
CONFIG_OPROFILE=y
# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_OPROFILE_NMI_TIMER=y
CONFIG_KPROBES=y
# CONFIG_JUMP_LABEL is not set
CONFIG_UPROBES=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_KRETPROBES=y
CONFIG_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_OPTPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_GENERIC_SMP_IDLE_THREAD=y
CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
CONFIG_HAVE_DMA_API_DEBUG=y
CONFIG_HAVE_HW_BREAKPOINT=y
CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y
CONFIG_HAVE_USER_RETURN_NOTIFIER=y
CONFIG_HAVE_PERF_EVENTS_NMI=y
CONFIG_HAVE_PERF_REGS=y
CONFIG_HAVE_PERF_USER_STACK_DUMP=y
CONFIG_HAVE_ARCH_JUMP_LABEL=y
CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y
CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y
CONFIG_HAVE_CMPXCHG_LOCAL=y
CONFIG_HAVE_CMPXCHG_DOUBLE=y
CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y
CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y
CONFIG_GENERIC_KERNEL_THREAD=y
CONFIG_GENERIC_KERNEL_EXECVE=y
CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
CONFIG_SECCOMP_FILTER=y
CONFIG_HAVE_RCU_USER_QS=y
CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y
CONFIG_MODULES_USE_ELF_RELA=y
#
# GCOV-based kernel profiling
#
# CONFIG_GCOV_KERNEL is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
# CONFIG_MODULE_SIG is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_BSGLIB is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
CONFIG_BSD_DISKLABEL=y
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
CONFIG_LDM_PARTITION=y
CONFIG_LDM_DEBUG=y
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
CONFIG_BLOCK_COMPAT=y
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
CONFIG_PREEMPT_NOTIFIERS=y
CONFIG_UNINLINE_SPIN_UNLOCK=y
CONFIG_MUTEX_SPIN_ON_OWNER=y
CONFIG_FREEZER=y
#
# Processor type and features
#
CONFIG_ZONE_DMA=y
CONFIG_SMP=y
CONFIG_X86_MPPARSE=y
# CONFIG_X86_EXTENDED_PLATFORM is not set
CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
CONFIG_NO_BOOTMEM=y
CONFIG_MEMTEST=y
# CONFIG_MK8 is not set
# CONFIG_MPSC is not set
# CONFIG_MCORE2 is not set
# CONFIG_MATOM is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_INTERNODE_CACHE_SHIFT=6
CONFIG_X86_CMPXCHG=y
CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_XADD=y
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_CMOV=y
CONFIG_X86_MINIMUM_CPU_FAMILY=64
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
CONFIG_CPU_SUP_CENTAUR=y
CONFIG_HPET_TIMER=y
CONFIG_DMI=y
CONFIG_GART_IOMMU=y
# CONFIG_CALGARY_IOMMU is not set
CONFIG_SWIOTLB=y
CONFIG_IOMMU_HELPER=y
# CONFIG_MAXSMP is not set
CONFIG_NR_CPUS=8
CONFIG_SCHED_SMT=y
CONFIG_SCHED_MC=y
# CONFIG_PREEMPT_NONE is not set
# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_PREEMPT_COUNT=y
CONFIG_X86_LOCAL_APIC=y
CONFIG_X86_IO_APIC=y
# CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS is not set
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
# CONFIG_X86_MCE_AMD is not set
CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_X86_MCE_INJECT is not set
CONFIG_X86_THERMAL_VECTOR=y
# CONFIG_I8K is not set
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
# CONFIG_MICROCODE_AMD is not set
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_ARCH_DMA_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
# CONFIG_NUMA is not set
CONFIG_ARCH_SPARSEMEM_ENABLE=y
CONFIG_ARCH_SPARSEMEM_DEFAULT=y
CONFIG_ARCH_SELECT_MEMORY_MODEL=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_ARCH_PROC_KCORE_TEXT=y
CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_SPARSEMEM_MANUAL=y
CONFIG_SPARSEMEM=y
CONFIG_HAVE_MEMORY_PRESENT=y
CONFIG_SPARSEMEM_EXTREME=y
CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y
CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y
CONFIG_SPARSEMEM_VMEMMAP=y
CONFIG_HAVE_MEMBLOCK=y
CONFIG_HAVE_MEMBLOCK_NODE_MAP=y
CONFIG_ARCH_DISCARD_MEMBLOCK=y
CONFIG_MEMORY_ISOLATION=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTPLUG_SPARSE=y
CONFIG_MEMORY_HOTREMOVE=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
CONFIG_COMPACTION=y
CONFIG_MIGRATION=y
CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_MMU_NOTIFIER=y
# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y
# CONFIG_MEMORY_FAILURE is not set
CONFIG_TRANSPARENT_HUGEPAGE=y
CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set
# CONFIG_CROSS_MEMORY_ATTACH is not set
# CONFIG_CLEANCACHE is not set
# CONFIG_FRONTSWAP is not set
# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set
CONFIG_X86_RESERVE_LOW=64
CONFIG_MTRR=y
# CONFIG_MTRR_SANITIZER is not set
CONFIG_X86_PAT=y
CONFIG_ARCH_USES_PG_UNCACHED=y
CONFIG_ARCH_RANDOM=y
CONFIG_X86_SMAP=y
# CONFIG_EFI is not set
CONFIG_SECCOMP=y
# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=250
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
# CONFIG_CRASH_DUMP is not set
# CONFIG_KEXEC_JUMP is not set
CONFIG_PHYSICAL_START=0x1000000
CONFIG_RELOCATABLE=y
CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
CONFIG_COMPAT_VDSO=y
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
#
# Power management and ACPI options
#
CONFIG_ARCH_HIBERNATION_HEADER=y
CONFIG_SUSPEND=y
CONFIG_SUSPEND_FREEZER=y
CONFIG_HIBERNATE_CALLBACKS=y
CONFIG_HIBERNATION=y
CONFIG_PM_STD_PARTITION=""
CONFIG_PM_SLEEP=y
CONFIG_PM_SLEEP_SMP=y
# CONFIG_PM_AUTOSLEEP is not set
# CONFIG_PM_WAKELOCKS is not set
# CONFIG_PM_RUNTIME is not set
CONFIG_PM=y
CONFIG_PM_DEBUG=y
# CONFIG_PM_ADVANCED_DEBUG is not set
CONFIG_PM_SLEEP_DEBUG=y
# CONFIG_PM_TRACE_RTC is not set
CONFIG_ACPI=y
CONFIG_ACPI_SLEEP=y
# CONFIG_ACPI_PROCFS is not set
# CONFIG_ACPI_PROCFS_POWER is not set
# CONFIG_ACPI_EC_DEBUGFS is not set
CONFIG_ACPI_PROC_EVENT=y
CONFIG_ACPI_AC=y
CONFIG_ACPI_BATTERY=y
CONFIG_ACPI_BUTTON=y
CONFIG_ACPI_VIDEO=m
CONFIG_ACPI_FAN=y
CONFIG_ACPI_DOCK=y
CONFIG_ACPI_PROCESSOR=y
CONFIG_ACPI_HOTPLUG_CPU=y
# CONFIG_ACPI_PROCESSOR_AGGREGATOR is not set
CONFIG_ACPI_THERMAL=y
# CONFIG_ACPI_CUSTOM_DSDT is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
CONFIG_ACPI_DEBUG=y
# CONFIG_ACPI_DEBUG_FUNC_TRACE is not set
# CONFIG_ACPI_PCI_SLOT is not set
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_HOTPLUG_MEMORY is not set
# CONFIG_ACPI_SBS is not set
# CONFIG_ACPI_HED is not set
# CONFIG_ACPI_CUSTOM_METHOD is not set
# CONFIG_ACPI_APEI is not set
# CONFIG_SFI is not set
#
# CPU Frequency scaling
#
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_TABLE=y
CONFIG_CPU_FREQ_STAT=y
# CONFIG_CPU_FREQ_STAT_DETAILS is not set
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
CONFIG_CPU_FREQ_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_ONDEMAND=y
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
#
# x86 CPU frequency scaling drivers
#
# CONFIG_X86_PCC_CPUFREQ is not set
CONFIG_X86_ACPI_CPUFREQ=y
CONFIG_X86_ACPI_CPUFREQ_CPB=y
# CONFIG_X86_POWERNOW_K8 is not set
# CONFIG_X86_SPEEDSTEP_CENTRINO is not set
# CONFIG_X86_P4_CLOCKMOD is not set
#
# shared options
#
# CONFIG_X86_SPEEDSTEP_LIB is not set
CONFIG_CPU_IDLE=y
CONFIG_CPU_IDLE_GOV_LADDER=y
CONFIG_CPU_IDLE_GOV_MENU=y
# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
# CONFIG_INTEL_IDLE is not set
#
# Memory power savings
#
# CONFIG_I7300_IDLE is not set
#
# Bus options (PCI etc.)
#
CONFIG_PCI=y
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
# CONFIG_PCIEPORTBUS is not set
CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set
# CONFIG_PCI_STUB is not set
# CONFIG_HT_IRQ is not set
# CONFIG_PCI_IOV is not set
# CONFIG_PCI_PRI is not set
# CONFIG_PCI_PASID is not set
CONFIG_PCI_IOAPIC=y
CONFIG_PCI_LABEL=y
CONFIG_ISA_DMA_API=y
CONFIG_AMD_NB=y
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_RAPIDIO is not set
#
# Executable file formats / Emulations
#
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
CONFIG_BINFMT_MISC=m
CONFIG_COREDUMP=y
CONFIG_IA32_EMULATION=y
# CONFIG_IA32_AOUT is not set
# CONFIG_X86_X32 is not set
CONFIG_COMPAT=y
CONFIG_COMPAT_FOR_U64_ALIGNMENT=y
CONFIG_SYSVIPC_COMPAT=y
CONFIG_KEYS_COMPAT=y
CONFIG_HAVE_TEXT_POKE_SMP=y
CONFIG_X86_DEV_DMA_OPS=y
CONFIG_NET=y
CONFIG_COMPAT_NETLINK_MESSAGES=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_DIAG is not set
CONFIG_UNIX=y
# CONFIG_UNIX_DIAG is not set
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
CONFIG_IP_MULTICAST=y
CONFIG_IP_ADVANCED_ROUTER=y
# CONFIG_IP_FIB_TRIE_STATS is not set
CONFIG_IP_MULTIPLE_TABLES=y
CONFIG_IP_ROUTE_MULTIPATH=y
CONFIG_IP_ROUTE_VERBOSE=y
CONFIG_IP_PNP=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE_DEMUX is not set
# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_NET_IPVTI is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
CONFIG_INET_TUNNEL=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
# CONFIG_INET_XFRM_MODE_BEET is not set
CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_INET_UDP_DIAG is not set
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
CONFIG_IPV6=y
# CONFIG_IPV6_PRIVACY is not set
# CONFIG_IPV6_ROUTER_PREF is not set
# CONFIG_IPV6_OPTIMISTIC_DAD is not set
# CONFIG_INET6_AH is not set
# CONFIG_INET6_ESP is not set
# CONFIG_INET6_IPCOMP is not set
# CONFIG_IPV6_MIP6 is not set
# CONFIG_INET6_XFRM_TUNNEL is not set
# CONFIG_INET6_TUNNEL is not set
CONFIG_INET6_XFRM_MODE_TRANSPORT=y
CONFIG_INET6_XFRM_MODE_TUNNEL=y
# CONFIG_INET6_XFRM_MODE_BEET is not set
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
# CONFIG_IPV6_SIT_6RD is not set
CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_GRE is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETWORK_PHY_TIMESTAMPING is not set
CONFIG_NETFILTER=y
# CONFIG_NETFILTER_DEBUG is not set
CONFIG_NETFILTER_ADVANCED=y
#
# Core Netfilter Configuration
#
CONFIG_NETFILTER_NETLINK=m
# CONFIG_NETFILTER_NETLINK_ACCT is not set
CONFIG_NETFILTER_NETLINK_QUEUE=m
CONFIG_NETFILTER_NETLINK_LOG=m
CONFIG_NF_CONNTRACK=m
CONFIG_NF_CONNTRACK_MARK=y
CONFIG_NF_CONNTRACK_PROCFS=y
CONFIG_NF_CONNTRACK_EVENTS=y
# CONFIG_NF_CONNTRACK_TIMEOUT is not set
# CONFIG_NF_CONNTRACK_TIMESTAMP is not set
# CONFIG_NF_CT_PROTO_DCCP is not set
CONFIG_NF_CT_PROTO_SCTP=m
CONFIG_NF_CT_PROTO_UDPLITE=m
# CONFIG_NF_CONNTRACK_AMANDA is not set
CONFIG_NF_CONNTRACK_FTP=m
# CONFIG_NF_CONNTRACK_H323 is not set
CONFIG_NF_CONNTRACK_IRC=m
CONFIG_NF_CONNTRACK_BROADCAST=m
CONFIG_NF_CONNTRACK_NETBIOS_NS=m
# CONFIG_NF_CONNTRACK_SNMP is not set
# CONFIG_NF_CONNTRACK_PPTP is not set
# CONFIG_NF_CONNTRACK_SANE is not set
# CONFIG_NF_CONNTRACK_SIP is not set
CONFIG_NF_CONNTRACK_TFTP=m
# CONFIG_NF_CT_NETLINK is not set
# CONFIG_NF_CT_NETLINK_TIMEOUT is not set
# CONFIG_NETFILTER_NETLINK_QUEUE_CT is not set
# CONFIG_NETFILTER_TPROXY is not set
CONFIG_NETFILTER_XTABLES=m
#
# Xtables combined modules
#
CONFIG_NETFILTER_XT_MARK=m
CONFIG_NETFILTER_XT_CONNMARK=m
#
# Xtables targets
#
# CONFIG_NETFILTER_XT_TARGET_CHECKSUM is not set
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
# CONFIG_NETFILTER_XT_TARGET_CT is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
CONFIG_NETFILTER_XT_TARGET_HL=m
# CONFIG_NETFILTER_XT_TARGET_HMARK is not set
# CONFIG_NETFILTER_XT_TARGET_IDLETIMER is not set
# CONFIG_NETFILTER_XT_TARGET_LED is not set
# CONFIG_NETFILTER_XT_TARGET_LOG is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_RATEEST=m
# CONFIG_NETFILTER_XT_TARGET_TEE is not set
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
#
# Xtables matches
#
# CONFIG_NETFILTER_XT_MATCH_ADDRTYPE is not set
# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
# CONFIG_NETFILTER_XT_MATCH_CPU is not set
CONFIG_NETFILTER_XT_MATCH_DCCP=m
# CONFIG_NETFILTER_XT_MATCH_DEVGROUP is not set
CONFIG_NETFILTER_XT_MATCH_DSCP=m
CONFIG_NETFILTER_XT_MATCH_ECN=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
CONFIG_NETFILTER_XT_MATCH_HELPER=m
CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_NETFILTER_XT_MATCH_MAC=m
CONFIG_NETFILTER_XT_MATCH_MARK=m
CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
# CONFIG_NETFILTER_XT_MATCH_NFACCT is not set
# CONFIG_NETFILTER_XT_MATCH_OSF is not set
CONFIG_NETFILTER_XT_MATCH_OWNER=m
CONFIG_NETFILTER_XT_MATCH_POLICY=m
CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
CONFIG_NETFILTER_XT_MATCH_QUOTA=m
CONFIG_NETFILTER_XT_MATCH_RATEEST=m
# CONFIG_NETFILTER_XT_MATCH_REALM is not set
# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
CONFIG_NETFILTER_XT_MATCH_SCTP=m
CONFIG_NETFILTER_XT_MATCH_STATE=m
CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
CONFIG_NETFILTER_XT_MATCH_STRING=m
CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
CONFIG_NETFILTER_XT_MATCH_TIME=m
CONFIG_NETFILTER_XT_MATCH_U32=m
# CONFIG_IP_SET is not set
# CONFIG_IP_VS is not set
#
# IP: Netfilter Configuration
#
CONFIG_NF_DEFRAG_IPV4=m
CONFIG_NF_CONNTRACK_IPV4=m
CONFIG_NF_CONNTRACK_PROC_COMPAT=y
CONFIG_IP_NF_QUEUE=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
# CONFIG_IP_NF_MATCH_RPFILTER is not set
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
CONFIG_IP_NF_TARGET_ULOG=m
# CONFIG_NF_NAT_IPV4 is not set
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_IP_NF_TARGET_TTL=m
CONFIG_IP_NF_RAW=m
CONFIG_IP_NF_ARPTABLES=m
CONFIG_IP_NF_ARPFILTER=m
CONFIG_IP_NF_ARP_MANGLE=m
#
# IPv6: Netfilter Configuration
#
# CONFIG_NF_DEFRAG_IPV6 is not set
# CONFIG_NF_CONNTRACK_IPV6 is not set
# CONFIG_IP6_NF_IPTABLES is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_L2TP is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_IEEE802154 is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
CONFIG_DNS_RESOLVER=y
# CONFIG_BATMAN_ADV is not set
# CONFIG_OPENVSWITCH is not set
CONFIG_RPS=y
CONFIG_RFS_ACCEL=y
CONFIG_XPS=y
# CONFIG_NETPRIO_CGROUP is not set
CONFIG_BQL=y
# CONFIG_BPF_JIT is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_WEXT_CORE=y
CONFIG_WEXT_PROC=y
CONFIG_CFG80211=m
# CONFIG_NL80211_TESTMODE is not set
# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_CFG80211_DEFAULT_PS=y
# CONFIG_CFG80211_DEBUGFS is not set
# CONFIG_CFG80211_INTERNAL_REGDB is not set
CONFIG_CFG80211_WEXT=y
CONFIG_LIB80211=m
# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=m
CONFIG_MAC80211_HAS_RC=y
CONFIG_MAC80211_RC_MINSTREL=y
CONFIG_MAC80211_RC_MINSTREL_HT=y
CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_MESSAGE_TRACING is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_CAIF is not set
# CONFIG_CEPH_LIB is not set
# CONFIG_NFC is not set
CONFIG_HAVE_BPF_JIT=y
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
# CONFIG_FIRMWARE_IN_KERNEL is not set
CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_GENERIC_CPU_DEVICES is not set
CONFIG_DMA_SHARED_BUFFER=y
#
# Bus devices
#
# CONFIG_OMAP_OCP2SCP is not set
CONFIG_CONNECTOR=m
# CONFIG_MTD is not set
# CONFIG_PARPORT is not set
CONFIG_PNP=y
# CONFIG_PNP_DEBUG_MESSAGES is not set
#
# Protocols
#
CONFIG_PNPACPI=y
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_PCIESSD_MTIP32XX is not set
# CONFIG_BLK_CPQ_DA is not set
# CONFIG_BLK_CPQ_CISS_DA is not set
# CONFIG_BLK_DEV_DAC960 is not set
# CONFIG_BLK_DEV_UMEM is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_LOOP_MIN_COUNT=8
# CONFIG_BLK_DEV_CRYPTOLOOP is not set
# CONFIG_BLK_DEV_DRBD is not set
# CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_NVME is not set
# CONFIG_BLK_DEV_SX8 is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
# CONFIG_BLK_DEV_RBD is not set
#
# Misc devices
#
# CONFIG_SENSORS_LIS3LV02D is not set
# CONFIG_AD525X_DPOT is not set
# CONFIG_IBM_ASM is not set
# CONFIG_PHANTOM is not set
# CONFIG_INTEL_MID_PTI is not set
# CONFIG_SGI_IOC4 is not set
CONFIG_TIFM_CORE=m
CONFIG_TIFM_7XX1=m
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_APDS9802ALS is not set
# CONFIG_ISL29003 is not set
# CONFIG_ISL29020 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_SENSORS_BH1780 is not set
# CONFIG_SENSORS_BH1770 is not set
# CONFIG_SENSORS_APDS990X is not set
# CONFIG_HMC6352 is not set
# CONFIG_DS1682 is not set
# CONFIG_VMWARE_BALLOON is not set
# CONFIG_BMP085_I2C is not set
# CONFIG_PCH_PHUB is not set
# CONFIG_USB_SWITCH_FSA9480 is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_AT24 is not set
# CONFIG_EEPROM_LEGACY is not set
# CONFIG_EEPROM_MAX6875 is not set
# CONFIG_EEPROM_93CX6 is not set
CONFIG_CB710_CORE=m
# CONFIG_CB710_DEBUG is not set
CONFIG_CB710_DEBUG_ASSUMPTIONS=y
#
# Texas Instruments shared transport line discipline
#
# CONFIG_SENSORS_LIS3_I2C is not set
#
# Altera FPGA firmware download module
#
# CONFIG_ALTERA_STAPL is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
# CONFIG_IDE_GD_ATAPI is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
CONFIG_BLK_DEV_IDEACPI=y
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
#
# IDE chipset support/bugfixes
#
CONFIG_IDE_GENERIC=y
# CONFIG_BLK_DEV_PLATFORM is not set
# CONFIG_BLK_DEV_CMD640 is not set
# CONFIG_BLK_DEV_IDEPNP is not set
CONFIG_BLK_DEV_IDEDMA_SFF=y
#
# PCI IDE chipsets support
#
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_PCIBUS_ORDER=y
# CONFIG_BLK_DEV_GENERIC is not set
# CONFIG_BLK_DEV_OPTI621 is not set
# CONFIG_BLK_DEV_RZ1000 is not set
CONFIG_BLK_DEV_IDEDMA_PCI=y
# CONFIG_BLK_DEV_AEC62XX is not set
# CONFIG_BLK_DEV_ALI15X3 is not set
# CONFIG_BLK_DEV_AMD74XX is not set
# CONFIG_BLK_DEV_ATIIXP is not set
# CONFIG_BLK_DEV_CMD64X is not set
# CONFIG_BLK_DEV_TRIFLEX is not set
# CONFIG_BLK_DEV_CS5520 is not set
# CONFIG_BLK_DEV_CS5530 is not set
# CONFIG_BLK_DEV_HPT366 is not set
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
CONFIG_BLK_DEV_PIIX=y
# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_PDC202XX_OLD is not set
# CONFIG_BLK_DEV_PDC202XX_NEW is not set
# CONFIG_BLK_DEV_SVWKS is not set
# CONFIG_BLK_DEV_SIIMAGE is not set
# CONFIG_BLK_DEV_SIS5513 is not set
# CONFIG_BLK_DEV_SLC90E66 is not set
# CONFIG_BLK_DEV_TRM290 is not set
# CONFIG_BLK_DEV_VIA82CXXX is not set
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDEDMA=y
#
# SCSI device support
#
CONFIG_SCSI_MOD=y
# CONFIG_RAID_ATTRS is not set
CONFIG_SCSI=y
CONFIG_SCSI_DMA=y
# CONFIG_SCSI_TGT is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_SCSI_PROC_FS is not set
#
# SCSI support type (disk, tape, CD-ROM)
#
CONFIG_BLK_DEV_SD=y
# CONFIG_CHR_DEV_ST is not set
# CONFIG_CHR_DEV_OSST is not set
CONFIG_BLK_DEV_SR=y
# CONFIG_BLK_DEV_SR_VENDOR is not set
CONFIG_CHR_DEV_SG=y
# CONFIG_CHR_DEV_SCH is not set
# CONFIG_SCSI_MULTI_LUN is not set
# CONFIG_SCSI_CONSTANTS is not set
# CONFIG_SCSI_LOGGING is not set
# CONFIG_SCSI_SCAN_ASYNC is not set
#
# SCSI Transports
#
CONFIG_SCSI_SPI_ATTRS=y
# CONFIG_SCSI_FC_ATTRS is not set
# CONFIG_SCSI_ISCSI_ATTRS is not set
# CONFIG_SCSI_SAS_ATTRS is not set
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_VERBOSE_ERROR=y
CONFIG_ATA_ACPI=y
# CONFIG_SATA_PMP is not set
#
# Controllers with non-SFF native interface
#
CONFIG_SATA_AHCI=y
# CONFIG_SATA_AHCI_PLATFORM is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_SATA_ACARD_AHCI is not set
# CONFIG_SATA_SIL24 is not set
CONFIG_ATA_SFF=y
#
# SFF controllers with custom DMA interface
#
# CONFIG_PDC_ADMA is not set
# CONFIG_SATA_QSTOR is not set
# CONFIG_SATA_SX4 is not set
CONFIG_ATA_BMDMA=y
#
# SATA SFF controllers with BMDMA
#
CONFIG_ATA_PIIX=y
# CONFIG_SATA_HIGHBANK is not set
# CONFIG_SATA_MV is not set
# CONFIG_SATA_NV is not set
# CONFIG_SATA_PROMISE is not set
# CONFIG_SATA_SIL is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_SVW is not set
# CONFIG_SATA_ULI is not set
# CONFIG_SATA_VIA is not set
# CONFIG_SATA_VITESSE is not set
#
# PATA SFF controllers with BMDMA
#
# CONFIG_PATA_ALI is not set
# CONFIG_PATA_AMD is not set
# CONFIG_PATA_ARASAN_CF is not set
# CONFIG_PATA_ARTOP is not set
# CONFIG_PATA_ATIIXP is not set
# CONFIG_PATA_ATP867X is not set
# CONFIG_PATA_CMD64X is not set
# CONFIG_PATA_CS5520 is not set
# CONFIG_PATA_CS5530 is not set
# CONFIG_PATA_CS5536 is not set
# CONFIG_PATA_CYPRESS is not set
# CONFIG_PATA_EFAR is not set
# CONFIG_PATA_HPT366 is not set
# CONFIG_PATA_HPT37X is not set
# CONFIG_PATA_HPT3X2N is not set
# CONFIG_PATA_HPT3X3 is not set
# CONFIG_PATA_IT8213 is not set
# CONFIG_PATA_IT821X is not set
# CONFIG_PATA_JMICRON is not set
# CONFIG_PATA_MARVELL is not set
# CONFIG_PATA_NETCELL is not set
# CONFIG_PATA_NINJA32 is not set
# CONFIG_PATA_NS87415 is not set
# CONFIG_PATA_OLDPIIX is not set
# CONFIG_PATA_OPTIDMA is not set
# CONFIG_PATA_PDC2027X is not set
# CONFIG_PATA_PDC_OLD is not set
# CONFIG_PATA_RADISYS is not set
# CONFIG_PATA_RDC is not set
# CONFIG_PATA_SC1200 is not set
# CONFIG_PATA_SCH is not set
# CONFIG_PATA_SERVERWORKS is not set
# CONFIG_PATA_SIL680 is not set
# CONFIG_PATA_SIS is not set
# CONFIG_PATA_TOSHIBA is not set
# CONFIG_PATA_TRIFLEX is not set
# CONFIG_PATA_VIA is not set
# CONFIG_PATA_WINBOND is not set
#
# PIO-only SFF controllers
#
# CONFIG_PATA_CMD640_PCI is not set
# CONFIG_PATA_MPIIX is not set
# CONFIG_PATA_NS87410 is not set
# CONFIG_PATA_OPTI is not set
# CONFIG_PATA_RZ1000 is not set
#
# Generic fallback / legacy drivers
#
# CONFIG_PATA_ACPI is not set
# CONFIG_ATA_GENERIC is not set
# CONFIG_PATA_LEGACY is not set
# CONFIG_MD is not set
# CONFIG_TARGET_CORE is not set
# CONFIG_FUSION is not set
#
# IEEE 1394 (FireWire) support
#
# CONFIG_FIREWIRE is not set
# CONFIG_FIREWIRE_NOSY is not set
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
CONFIG_NET_CORE=y
# CONFIG_BONDING is not set
CONFIG_DUMMY=m
# CONFIG_EQUALIZER is not set
# CONFIG_NET_FC is not set
# CONFIG_MII is not set
# CONFIG_NET_TEAM is not set
# CONFIG_MACVLAN is not set
# CONFIG_VXLAN is not set
CONFIG_NETCONSOLE=y
CONFIG_NETPOLL=y
# CONFIG_NETPOLL_TRAP is not set
CONFIG_NET_POLL_CONTROLLER=y
CONFIG_TUN=m
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
#
# CAIF transport drivers
#
CONFIG_ETHERNET=y
CONFIG_NET_VENDOR_3COM=y
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
CONFIG_NET_VENDOR_ADAPTEC=y
# CONFIG_ADAPTEC_STARFIRE is not set
CONFIG_NET_VENDOR_ALTEON=y
# CONFIG_ACENIC is not set
CONFIG_NET_VENDOR_AMD=y
# CONFIG_AMD8111_ETH is not set
# CONFIG_PCNET32 is not set
CONFIG_NET_VENDOR_ATHEROS=y
# CONFIG_ATL2 is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
# CONFIG_ATL1C is not set
CONFIG_NET_VENDOR_BROADCOM=y
# CONFIG_B44 is not set
# CONFIG_BNX2 is not set
# CONFIG_CNIC is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2X is not set
CONFIG_NET_VENDOR_BROCADE=y
# CONFIG_BNA is not set
# CONFIG_NET_CALXEDA_XGMAC is not set
CONFIG_NET_VENDOR_CHELSIO=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_CHELSIO_T3 is not set
# CONFIG_CHELSIO_T4 is not set
# CONFIG_CHELSIO_T4VF is not set
CONFIG_NET_VENDOR_CISCO=y
# CONFIG_ENIC is not set
# CONFIG_DNET is not set
CONFIG_NET_VENDOR_DEC=y
# CONFIG_NET_TULIP is not set
CONFIG_NET_VENDOR_DLINK=y
# CONFIG_DL2K is not set
# CONFIG_SUNDANCE is not set
CONFIG_NET_VENDOR_EMULEX=y
# CONFIG_BE2NET is not set
CONFIG_NET_VENDOR_EXAR=y
# CONFIG_S2IO is not set
# CONFIG_VXGE is not set
CONFIG_NET_VENDOR_HP=y
# CONFIG_HP100 is not set
CONFIG_NET_VENDOR_INTEL=y
# CONFIG_E100 is not set
# CONFIG_E1000 is not set
CONFIG_E1000E=y
# CONFIG_IGB is not set
# CONFIG_IGBVF is not set
# CONFIG_IXGB is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGBEVF is not set
# CONFIG_NET_VENDOR_I825XX is not set
# CONFIG_IP1000 is not set
# CONFIG_JME is not set
CONFIG_NET_VENDOR_MARVELL=y
# CONFIG_SKGE is not set
CONFIG_SKY2=y
# CONFIG_SKY2_DEBUG is not set
CONFIG_NET_VENDOR_MELLANOX=y
# CONFIG_MLX4_EN is not set
# CONFIG_MLX4_CORE is not set
CONFIG_NET_VENDOR_MICREL=y
# CONFIG_KS8851_MLL is not set
# CONFIG_KSZ884X_PCI is not set
CONFIG_NET_VENDOR_MYRI=y
# CONFIG_MYRI10GE is not set
# CONFIG_FEALNX is not set
CONFIG_NET_VENDOR_NATSEMI=y
# CONFIG_NATSEMI is not set
# CONFIG_NS83820 is not set
CONFIG_NET_VENDOR_8390=y
# CONFIG_NE2K_PCI is not set
CONFIG_NET_VENDOR_NVIDIA=y
# CONFIG_FORCEDETH is not set
CONFIG_NET_VENDOR_OKI=y
# CONFIG_PCH_GBE is not set
# CONFIG_ETHOC is not set
# CONFIG_NET_PACKET_ENGINE is not set
CONFIG_NET_VENDOR_QLOGIC=y
# CONFIG_QLA3XXX is not set
# CONFIG_QLCNIC is not set
# CONFIG_QLGE is not set
# CONFIG_NETXEN_NIC is not set
CONFIG_NET_VENDOR_REALTEK=y
# CONFIG_8139CP is not set
# CONFIG_8139TOO is not set
# CONFIG_R8169 is not set
CONFIG_NET_VENDOR_RDC=y
# CONFIG_R6040 is not set
CONFIG_NET_VENDOR_SEEQ=y
# CONFIG_SEEQ8005 is not set
CONFIG_NET_VENDOR_SILAN=y
# CONFIG_SC92031 is not set
CONFIG_NET_VENDOR_SIS=y
# CONFIG_SIS900 is not set
# CONFIG_SIS190 is not set
# CONFIG_SFC is not set
CONFIG_NET_VENDOR_SMSC=y
# CONFIG_EPIC100 is not set
# CONFIG_SMSC9420 is not set
CONFIG_NET_VENDOR_STMICRO=y
# CONFIG_STMMAC_ETH is not set
CONFIG_NET_VENDOR_SUN=y
# CONFIG_HAPPYMEAL is not set
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NIU is not set
CONFIG_NET_VENDOR_TEHUTI=y
# CONFIG_TEHUTI is not set
CONFIG_NET_VENDOR_TI=y
# CONFIG_TLAN is not set
CONFIG_NET_VENDOR_VIA=y
# CONFIG_VIA_RHINE is not set
# CONFIG_VIA_VELOCITY is not set
CONFIG_NET_VENDOR_WIZNET=y
# CONFIG_WIZNET_W5100 is not set
# CONFIG_WIZNET_W5300 is not set
# CONFIG_FDDI is not set
# CONFIG_HIPPI is not set
# CONFIG_NET_SB1000 is not set
# CONFIG_PHYLIB is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
# CONFIG_USB_RTL8150 is not set
# CONFIG_USB_USBNET is not set
# CONFIG_USB_IPHETH is not set
CONFIG_WLAN=y
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
# CONFIG_ATMEL is not set
# CONFIG_AT76C50X_USB is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8180 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_MWL8K is not set
# CONFIG_ATH_COMMON is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_BRCMFMAC is not set
# CONFIG_HOSTAP is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
CONFIG_IWLWIFI=m
CONFIG_IWLDVM=m
#
# Debugging Options
#
# CONFIG_IWLWIFI_DEBUG is not set
# CONFIG_IWLWIFI_DEVICE_TRACING is not set
CONFIG_IWLWIFI_P2P=y
# CONFIG_IWLWIFI_EXPERIMENTAL_MFP is not set
# CONFIG_IWL4965 is not set
# CONFIG_IWL3945 is not set
# CONFIG_LIBERTAS is not set
# CONFIG_HERMES is not set
# CONFIG_P54_COMMON is not set
# CONFIG_RT2X00 is not set
# CONFIG_RTL8192CE is not set
# CONFIG_RTL8192SE is not set
# CONFIG_RTL8192DE is not set
# CONFIG_RTL8192CU is not set
# CONFIG_WL_TI is not set
# CONFIG_ZD1211RW is not set
# CONFIG_MWIFIEX is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_VMXNET3 is not set
# CONFIG_ISDN is not set
#
# Input device support
#
CONFIG_INPUT=y
# CONFIG_INPUT_FF_MEMLESS is not set
# CONFIG_INPUT_POLLDEV is not set
# CONFIG_INPUT_SPARSEKMAP is not set
# CONFIG_INPUT_MATRIXKMAP is not set
#
# Userland interfaces
#
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_EVBUG is not set
#
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ADP5589 is not set
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_QT1070 is not set
# CONFIG_KEYBOARD_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_TCA6416 is not set
# CONFIG_KEYBOARD_TCA8418 is not set
# CONFIG_KEYBOARD_LM8323 is not set
# CONFIG_KEYBOARD_LM8333 is not set
# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_MCS is not set
# CONFIG_KEYBOARD_MPR121 is not set
# CONFIG_KEYBOARD_NEWTON is not set
# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_OMAP4 is not set
# CONFIG_KEYBOARD_XTKBD is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_SENTELIC is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_APPLETOUCH is not set
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_MOUSE_SYNAPTICS_I2C is not set
# CONFIG_MOUSE_SYNAPTICS_USB is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
#
# Hardware I/O ports
#
CONFIG_SERIO=y
CONFIG_SERIO_I8042=y
# CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set
# CONFIG_SERIO_PCIPS2 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# CONFIG_SERIO_ALTERA_PS2 is not set
# CONFIG_SERIO_PS2MULT is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
CONFIG_VT=y
CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_VT_CONSOLE_SLEEP=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_SERIAL_NONSTANDARD is not set
# CONFIG_NOZOMI is not set
# CONFIG_N_GSM is not set
# CONFIG_TRACE_SINK is not set
CONFIG_DEVKMEM=y
#
# Serial drivers
#
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_PNP=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_FIX_EARLYCON_MEM=y
CONFIG_SERIAL_8250_PCI=y
CONFIG_SERIAL_8250_NR_UARTS=4
CONFIG_SERIAL_8250_RUNTIME_UARTS=4
# CONFIG_SERIAL_8250_EXTENDED is not set
#
# Non-8250 serial port support
#
# CONFIG_SERIAL_KGDB_NMI is not set
# CONFIG_SERIAL_MFD_HSU is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_CONSOLE_POLL=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_SCCNXP is not set
# CONFIG_SERIAL_TIMBERDALE is not set
# CONFIG_SERIAL_ALTERA_JTAGUART is not set
# CONFIG_SERIAL_ALTERA_UART is not set
# CONFIG_SERIAL_PCH_UART is not set
# CONFIG_SERIAL_XILINX_PS_UART is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_INTEL=y
# CONFIG_HW_RANDOM_AMD is not set
# CONFIG_HW_RANDOM_VIA is not set
# CONFIG_NVRAM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_MWAVE is not set
CONFIG_RAW_DRIVER=y
CONFIG_MAX_RAW_DEVS=256
CONFIG_HPET=y
CONFIG_HPET_MMAP=y
# CONFIG_HANGCHECK_TIMER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_TELCLOCK is not set
CONFIG_DEVPORT=y
CONFIG_I2C=m
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
# CONFIG_I2C_MUX is not set
CONFIG_I2C_HELPER_AUTO=y
CONFIG_I2C_ALGOBIT=m
#
# I2C Hardware Bus support
#
#
# PC SMBus host controller drivers
#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
CONFIG_I2C_I801=m
# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
#
# ACPI drivers
#
# CONFIG_I2C_SCMI is not set
#
# I2C system bus drivers (mostly embedded / system-on-chip)
#
# CONFIG_I2C_DESIGNWARE_PCI is not set
# CONFIG_I2C_EG20T is not set
# CONFIG_I2C_INTEL_MID is not set
# CONFIG_I2C_OCORES is not set
# CONFIG_I2C_PCA_PLATFORM is not set
# CONFIG_I2C_PXA_PCI is not set
# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_XILINX is not set
#
# External I2C/SMBus adapter drivers
#
# CONFIG_I2C_DIOLAN_U2C is not set
# CONFIG_I2C_PARPORT_LIGHT is not set
# CONFIG_I2C_TAOS_EVM is not set
# CONFIG_I2C_TINY_USB is not set
#
# Other I2C/SMBus bus drivers
#
# CONFIG_I2C_STUB is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
# CONFIG_I2C_DEBUG_BUS is not set
# CONFIG_SPI is not set
# CONFIG_HSI is not set
#
# PPS support
#
# CONFIG_PPS is not set
#
# PPS generators support
#
#
# PTP clock support
#
#
# Enable Device Drivers -> PPS to see the PTP clock options.
#
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_TEST_POWER is not set
# CONFIG_BATTERY_DS2780 is not set
# CONFIG_BATTERY_DS2781 is not set
# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_SBS is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_BATTERY_MAX17042 is not set
# CONFIG_CHARGER_MAX8903 is not set
# CONFIG_CHARGER_LP8727 is not set
# CONFIG_CHARGER_SMB347 is not set
# CONFIG_POWER_AVS is not set
CONFIG_HWMON=m
# CONFIG_HWMON_VID is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
#
# Native drivers
#
# CONFIG_SENSORS_ABITUGURU is not set
# CONFIG_SENSORS_ABITUGURU3 is not set
# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
# CONFIG_SENSORS_ADT7410 is not set
# CONFIG_SENSORS_ADT7411 is not set
# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ASC7621 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_K10TEMP is not set
# CONFIG_SENSORS_FAM15H_POWER is not set
# CONFIG_SENSORS_ASB100 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS620 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
# CONFIG_SENSORS_FSCHMD is not set
# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_HIH6130 is not set
CONFIG_SENSORS_CORETEMP=m
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_JC42 is not set
# CONFIG_SENSORS_LINEAGE is not set
# CONFIG_SENSORS_LM63 is not set
# CONFIG_SENSORS_LM73 is not set
# CONFIG_SENSORS_LM75 is not set
# CONFIG_SENSORS_LM77 is not set
# CONFIG_SENSORS_LM78 is not set
# CONFIG_SENSORS_LM80 is not set
# CONFIG_SENSORS_LM83 is not set
# CONFIG_SENSORS_LM85 is not set
# CONFIG_SENSORS_LM87 is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
# CONFIG_SENSORS_LTC4151 is not set
# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
# CONFIG_SENSORS_LTC4261 is not set
# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_LM95245 is not set
# CONFIG_SENSORS_MAX16065 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX1668 is not set
# CONFIG_SENSORS_MAX197 is not set
# CONFIG_SENSORS_MAX6639 is not set
# CONFIG_SENSORS_MAX6642 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_MCP3021 is not set
# CONFIG_SENSORS_NTC_THERMISTOR is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_PMBUS is not set
# CONFIG_SENSORS_SHT21 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMM665 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_EMC1403 is not set
# CONFIG_SENSORS_EMC2103 is not set
# CONFIG_SENSORS_EMC6W201 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47M192 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_SCH56XX_COMMON is not set
# CONFIG_SENSORS_ADS1015 is not set
# CONFIG_SENSORS_ADS7828 is not set
# CONFIG_SENSORS_AMC6821 is not set
# CONFIG_SENSORS_INA2XX is not set
# CONFIG_SENSORS_THMC50 is not set
# CONFIG_SENSORS_TMP102 is not set
# CONFIG_SENSORS_TMP401 is not set
# CONFIG_SENSORS_TMP421 is not set
# CONFIG_SENSORS_VIA_CPUTEMP is not set
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
# CONFIG_SENSORS_W83781D is not set
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
# CONFIG_SENSORS_W83795 is not set
# CONFIG_SENSORS_W83L785TS is not set
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_SENSORS_APPLESMC is not set
#
# ACPI drivers
#
# CONFIG_SENSORS_ACPI_POWER is not set
# CONFIG_SENSORS_ATK0110 is not set
CONFIG_THERMAL=y
# CONFIG_CPU_THERMAL is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
CONFIG_BCMA_POSSIBLE=y
#
# Broadcom specific AMBA
#
# CONFIG_BCMA is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_LM3533 is not set
# CONFIG_TPS6105X is not set
# CONFIG_TPS6507X is not set
# CONFIG_MFD_TPS65217 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_MFD_ARIZONA_I2C is not set
# CONFIG_MFD_PCF50633 is not set
# CONFIG_MFD_MC13XXX_I2C is not set
# CONFIG_ABX500_CORE is not set
# CONFIG_MFD_CS5535 is not set
# CONFIG_LPC_SCH is not set
# CONFIG_LPC_ICH is not set
# CONFIG_MFD_RDC321X is not set
# CONFIG_MFD_JANZ_CMODIO is not set
# CONFIG_MFD_VX855 is not set
# CONFIG_MFD_WL1273_CORE is not set
# CONFIG_REGULATOR is not set
# CONFIG_MEDIA_SUPPORT is not set
#
# Graphics support
#
CONFIG_AGP=y
CONFIG_AGP_AMD64=y
CONFIG_AGP_INTEL=y
# CONFIG_AGP_SIS is not set
# CONFIG_AGP_VIA is not set
CONFIG_VGA_ARB=y
CONFIG_VGA_ARB_MAX_GPUS=16
# CONFIG_VGA_SWITCHEROO is not set
CONFIG_DRM=m
CONFIG_DRM_KMS_HELPER=m
# CONFIG_DRM_LOAD_EDID_FIRMWARE is not set
# CONFIG_DRM_TDFX is not set
# CONFIG_DRM_R128 is not set
# CONFIG_DRM_RADEON is not set
# CONFIG_DRM_NOUVEAU is not set
#
# I2C encoder or helper chips
#
# CONFIG_DRM_I2C_CH7006 is not set
# CONFIG_DRM_I2C_SIL164 is not set
CONFIG_DRM_I915=m
# CONFIG_DRM_I915_KMS is not set
# CONFIG_DRM_MGA is not set
# CONFIG_DRM_SIS is not set
# CONFIG_DRM_VIA is not set
# CONFIG_DRM_SAVAGE is not set
# CONFIG_DRM_VMWGFX is not set
# CONFIG_DRM_GMA500 is not set
# CONFIG_DRM_UDL is not set
# CONFIG_DRM_AST is not set
# CONFIG_DRM_MGAG200 is not set
# CONFIG_DRM_CIRRUS_QEMU is not set
# CONFIG_STUB_POULSBO is not set
# CONFIG_VGASTATE is not set
CONFIG_VIDEO_OUTPUT_CONTROL=m
CONFIG_FB=m
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=m
CONFIG_FB_CFB_COPYAREA=m
CONFIG_FB_CFB_IMAGEBLIT=m
# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
# CONFIG_FB_SYS_FILLRECT is not set
# CONFIG_FB_SYS_COPYAREA is not set
# CONFIG_FB_SYS_IMAGEBLIT is not set
# CONFIG_FB_FOREIGN_ENDIAN is not set
# CONFIG_FB_SYS_FOPS is not set
# CONFIG_FB_WMT_GE_ROPS is not set
# CONFIG_FB_SVGALIB is not set
# CONFIG_FB_MACMODES is not set
# CONFIG_FB_BACKLIGHT is not set
CONFIG_FB_MODE_HELPERS=y
# CONFIG_FB_TILEBLITTING is not set
#
# Frame buffer hardware drivers
#
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
# CONFIG_FB_ARC is not set
# CONFIG_FB_VGA16 is not set
# CONFIG_FB_UVESA is not set
# CONFIG_FB_N411 is not set
# CONFIG_FB_HGA is not set
# CONFIG_FB_S1D13XXX is not set
# CONFIG_FB_NVIDIA is not set
# CONFIG_FB_RIVA is not set
# CONFIG_FB_I740 is not set
# CONFIG_FB_LE80578 is not set
# CONFIG_FB_MATROX is not set
# CONFIG_FB_RADEON is not set
# CONFIG_FB_ATY128 is not set
# CONFIG_FB_ATY is not set
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_CARMINE is not set
# CONFIG_FB_GEODE is not set
# CONFIG_FB_SMSCUFX is not set
# CONFIG_FB_UDL is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
# CONFIG_FB_BROADSHEET is not set
# CONFIG_FB_AUO_K190X is not set
# CONFIG_EXYNOS_VIDEO is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=m
CONFIG_BACKLIGHT_GENERIC=m
# CONFIG_BACKLIGHT_APPLE is not set
# CONFIG_BACKLIGHT_SAHARA is not set
# CONFIG_BACKLIGHT_ADP8860 is not set
# CONFIG_BACKLIGHT_ADP8870 is not set
# CONFIG_BACKLIGHT_LM3630 is not set
# CONFIG_BACKLIGHT_LM3639 is not set
# CONFIG_BACKLIGHT_LP855X is not set
#
# Console display driver support
#
CONFIG_VGA_CONSOLE=y
CONFIG_VGACON_SOFT_SCROLLBACK=y
CONFIG_VGACON_SOFT_SCROLLBACK_SIZE=128
CONFIG_DUMMY_CONSOLE=y
CONFIG_FRAMEBUFFER_CONSOLE=m
CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
# CONFIG_FONTS is not set
CONFIG_FONT_8x8=y
CONFIG_FONT_8x16=y
# CONFIG_LOGO is not set
CONFIG_SOUND=y
CONFIG_SOUND_OSS_CORE=y
CONFIG_SOUND_OSS_CORE_PRECLAIM=y
CONFIG_SND=m
CONFIG_SND_TIMER=m
CONFIG_SND_PCM=m
CONFIG_SND_JACK=y
CONFIG_SND_SEQUENCER=m
# CONFIG_SND_SEQ_DUMMY is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=m
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
CONFIG_SND_HRTIMER=m
CONFIG_SND_SEQ_HRTIMER_DEFAULT=y
CONFIG_SND_DYNAMIC_MINORS=y
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
CONFIG_SND_VMASTER=y
CONFIG_SND_KCTL_JACK=y
CONFIG_SND_DMA_SGBUF=y
# CONFIG_SND_RAWMIDI_SEQ is not set
# CONFIG_SND_OPL3_LIB_SEQ is not set
# CONFIG_SND_OPL4_LIB_SEQ is not set
# CONFIG_SND_SBAWE_SEQ is not set
# CONFIG_SND_EMU10K1_SEQ is not set
CONFIG_SND_DRIVERS=y
# CONFIG_SND_PCSP is not set
# CONFIG_SND_DUMMY is not set
# CONFIG_SND_ALOOP is not set
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_MTPAV is not set
# CONFIG_SND_SERIAL_U16550 is not set
# CONFIG_SND_MPU401 is not set
CONFIG_SND_PCI=y
# CONFIG_SND_AD1889 is not set
# CONFIG_SND_ALS300 is not set
# CONFIG_SND_ALS4000 is not set
# CONFIG_SND_ALI5451 is not set
# CONFIG_SND_ASIHPI is not set
# CONFIG_SND_ATIIXP is not set
# CONFIG_SND_ATIIXP_MODEM is not set
# CONFIG_SND_AU8810 is not set
# CONFIG_SND_AU8820 is not set
# CONFIG_SND_AU8830 is not set
# CONFIG_SND_AW2 is not set
# CONFIG_SND_AZT3328 is not set
# CONFIG_SND_BT87X is not set
# CONFIG_SND_CA0106 is not set
# CONFIG_SND_CMIPCI is not set
# CONFIG_SND_OXYGEN is not set
# CONFIG_SND_CS4281 is not set
# CONFIG_SND_CS46XX is not set
# CONFIG_SND_CS5530 is not set
# CONFIG_SND_CS5535AUDIO is not set
# CONFIG_SND_CTXFI is not set
# CONFIG_SND_DARLA20 is not set
# CONFIG_SND_GINA20 is not set
# CONFIG_SND_LAYLA20 is not set
# CONFIG_SND_DARLA24 is not set
# CONFIG_SND_GINA24 is not set
# CONFIG_SND_LAYLA24 is not set
# CONFIG_SND_MONA is not set
# CONFIG_SND_MIA is not set
# CONFIG_SND_ECHO3G is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
# CONFIG_SND_INDIGOIOX is not set
# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
# CONFIG_SND_ENS1371 is not set
# CONFIG_SND_ES1938 is not set
# CONFIG_SND_ES1968 is not set
# CONFIG_SND_FM801 is not set
CONFIG_SND_HDA_INTEL=m
CONFIG_SND_HDA_PREALLOC_SIZE=64
# CONFIG_SND_HDA_HWDEP is not set
# CONFIG_SND_HDA_INPUT_BEEP is not set
CONFIG_SND_HDA_INPUT_JACK=y
# CONFIG_SND_HDA_PATCH_LOADER is not set
CONFIG_SND_HDA_CODEC_REALTEK=y
CONFIG_SND_HDA_CODEC_ANALOG=y
CONFIG_SND_HDA_CODEC_SIGMATEL=y
CONFIG_SND_HDA_CODEC_VIA=y
CONFIG_SND_HDA_CODEC_HDMI=y
CONFIG_SND_HDA_CODEC_CIRRUS=y
CONFIG_SND_HDA_CODEC_CONEXANT=y
CONFIG_SND_HDA_CODEC_CA0110=y
CONFIG_SND_HDA_CODEC_CA0132=y
CONFIG_SND_HDA_CODEC_CMEDIA=y
CONFIG_SND_HDA_CODEC_SI3054=y
CONFIG_SND_HDA_GENERIC=y
CONFIG_SND_HDA_POWER_SAVE_DEFAULT=60
# CONFIG_SND_HDSP is not set
# CONFIG_SND_HDSPM is not set
# CONFIG_SND_ICE1712 is not set
# CONFIG_SND_ICE1724 is not set
# CONFIG_SND_INTEL8X0 is not set
# CONFIG_SND_INTEL8X0M is not set
# CONFIG_SND_KORG1212 is not set
# CONFIG_SND_LOLA is not set
# CONFIG_SND_LX6464ES is not set
# CONFIG_SND_MAESTRO3 is not set
# CONFIG_SND_MIXART is not set
# CONFIG_SND_NM256 is not set
# CONFIG_SND_PCXHR is not set
# CONFIG_SND_RIPTIDE is not set
# CONFIG_SND_RME32 is not set
# CONFIG_SND_RME96 is not set
# CONFIG_SND_RME9652 is not set
# CONFIG_SND_SONICVIBES is not set
# CONFIG_SND_TRIDENT is not set
# CONFIG_SND_VIA82XX is not set
# CONFIG_SND_VIA82XX_MODEM is not set
# CONFIG_SND_VIRTUOSO is not set
# CONFIG_SND_VX222 is not set
# CONFIG_SND_YMFPCI is not set
# CONFIG_SND_USB is not set
# CONFIG_SND_SOC is not set
CONFIG_SOUND_PRIME=y
# CONFIG_SOUND_OSS is not set
#
# HID support
#
CONFIG_HID=y
# CONFIG_HID_BATTERY_STRENGTH is not set
CONFIG_HIDRAW=y
# CONFIG_UHID is not set
CONFIG_HID_GENERIC=y
#
# Special HID drivers
#
CONFIG_HID_A4TECH=y
# CONFIG_HID_ACRUX is not set
CONFIG_HID_APPLE=y
# CONFIG_HID_AUREAL is not set
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
# CONFIG_HID_PRODIKEYS is not set
CONFIG_HID_CYPRESS=y
CONFIG_HID_DRAGONRISE=y
# CONFIG_DRAGONRISE_FF is not set
# CONFIG_HID_EMS_FF is not set
CONFIG_HID_EZKEY=y
# CONFIG_HID_HOLTEK is not set
# CONFIG_HID_KEYTOUCH is not set
CONFIG_HID_KYE=y
# CONFIG_HID_UCLOGIC is not set
# CONFIG_HID_WALTOP is not set
CONFIG_HID_GYRATION=y
CONFIG_HID_TWINHAN=y
CONFIG_HID_KENSINGTON=y
# CONFIG_HID_LCPOWER is not set
# CONFIG_HID_LENOVO_TPKBD is not set
CONFIG_HID_LOGITECH=y
CONFIG_HID_LOGITECH_DJ=m
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_LOGIG940_FF is not set
# CONFIG_LOGIWHEELS_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
# CONFIG_HID_MULTITOUCH is not set
CONFIG_HID_NTRIG=y
CONFIG_HID_ORTEK=y
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
# CONFIG_HID_PICOLCD is not set
# CONFIG_HID_PRIMAX is not set
# CONFIG_HID_ROCCAT is not set
# CONFIG_HID_SAITEK is not set
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
# CONFIG_HID_SPEEDLINK is not set
CONFIG_HID_SUNPLUS=y
CONFIG_HID_GREENASIA=y
# CONFIG_GREENASIA_FF is not set
CONFIG_HID_SMARTJOYPLUS=y
# CONFIG_SMARTJOYPLUS_FF is not set
# CONFIG_HID_TIVO is not set
CONFIG_HID_TOPSEED=y
CONFIG_HID_THRUSTMASTER=y
# CONFIG_THRUSTMASTER_FF is not set
CONFIG_HID_ZEROPLUS=y
# CONFIG_ZEROPLUS_FF is not set
# CONFIG_HID_ZYDACRON is not set
# CONFIG_HID_SENSOR_HUB is not set
#
# USB HID support
#
CONFIG_USB_HID=y
# CONFIG_HID_PID is not set
CONFIG_USB_HIDDEV=y
CONFIG_USB_ARCH_HAS_OHCI=y
CONFIG_USB_ARCH_HAS_EHCI=y
CONFIG_USB_ARCH_HAS_XHCI=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_COMMON=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
#
# Miscellaneous USB options
#
# CONFIG_USB_DYNAMIC_MINORS is not set
CONFIG_USB_MON=y
# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_C67X00_HCD is not set
# CONFIG_USB_XHCI_HCD is not set
CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_ISP1362_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_OHCI_HCD_PLATFORM is not set
# CONFIG_USB_EHCI_HCD_PLATFORM is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
CONFIG_USB_OHCI_LITTLE_ENDIAN=y
CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_CHIPIDEA is not set
#
# USB Device Class drivers
#
CONFIG_USB_ACM=m
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
# CONFIG_USB_TMC is not set
#
# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_REALTEK is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
CONFIG_USB_STORAGE_ISD200=y
CONFIG_USB_STORAGE_USBAT=y
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
CONFIG_USB_STORAGE_JUMPSHOT=y
CONFIG_USB_STORAGE_ALAUDA=y
# CONFIG_USB_STORAGE_ONETOUCH is not set
CONFIG_USB_STORAGE_KARMA=y
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_STORAGE_ENE_UB6250 is not set
# CONFIG_USB_UAS is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
#
# USB port drivers
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
# CONFIG_USB_SISUSBVGA is not set
# CONFIG_USB_LD is not set
# CONFIG_USB_TRANCEVIBRATOR is not set
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_YUREX is not set
# CONFIG_USB_EZUSB_FX2 is not set
#
# USB Physical Layer drivers
#
# CONFIG_OMAP_USB2 is not set
# CONFIG_USB_ISP1301 is not set
# CONFIG_USB_GADGET is not set
#
# OTG and related infrastructure
#
# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
CONFIG_MMC=m
# CONFIG_MMC_DEBUG is not set
# CONFIG_MMC_UNSAFE_RESUME is not set
# CONFIG_MMC_CLKGATE is not set
#
# MMC/SD/SDIO Card Drivers
#
CONFIG_MMC_BLOCK=m
CONFIG_MMC_BLOCK_MINORS=8
CONFIG_MMC_BLOCK_BOUNCE=y
# CONFIG_SDIO_UART is not set
# CONFIG_MMC_TEST is not set
#
# MMC/SD/SDIO Host Controller Drivers
#
CONFIG_MMC_SDHCI=m
CONFIG_MMC_SDHCI_PCI=m
# CONFIG_MMC_RICOH_MMC is not set
CONFIG_MMC_SDHCI_PLTFM=m
CONFIG_MMC_WBSD=m
CONFIG_MMC_TIFM_SD=m
CONFIG_MMC_CB710=m
# CONFIG_MMC_VIA_SDMMC is not set
CONFIG_MMC_VUB300=m
CONFIG_MMC_USHC=m
# CONFIG_MEMSTICK is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
# CONFIG_LEDS_LM3530 is not set
# CONFIG_LEDS_LM3642 is not set
# CONFIG_LEDS_PCA9532 is not set
# CONFIG_LEDS_LP3944 is not set
# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_LP5523 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
# CONFIG_LEDS_PCA9633 is not set
# CONFIG_LEDS_BD2802 is not set
# CONFIG_LEDS_INTEL_SS4200 is not set
# CONFIG_LEDS_TCA6507 is not set
# CONFIG_LEDS_LM355x is not set
# CONFIG_LEDS_OT200 is not set
# CONFIG_LEDS_BLINKM is not set
CONFIG_LEDS_TRIGGERS=y
#
# LED Triggers
#
# CONFIG_LEDS_TRIGGER_TIMER is not set
# CONFIG_LEDS_TRIGGER_ONESHOT is not set
# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_CPU is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
#
# iptables trigger is under Netfilter config (LED target)
#
# CONFIG_LEDS_TRIGGER_TRANSIENT is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
CONFIG_DMADEVICES=y
# CONFIG_DMADEVICES_DEBUG is not set
#
# DMA Devices
#
# CONFIG_INTEL_MID_DMAC is not set
# CONFIG_INTEL_IOATDMA is not set
# CONFIG_TIMB_DMA is not set
# CONFIG_PCH_DMA is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
#
# Virtio drivers
#
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_MMIO is not set
#
# Microsoft Hyper-V guest support
#
# CONFIG_HYPERV is not set
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
# CONFIG_ACERHDF is not set
# CONFIG_ASUS_LAPTOP is not set
CONFIG_DELL_LAPTOP=m
# CONFIG_FUJITSU_LAPTOP is not set
# CONFIG_FUJITSU_TABLET is not set
# CONFIG_HP_ACCEL is not set
# CONFIG_PANASONIC_LAPTOP is not set
# CONFIG_THINKPAD_ACPI is not set
# CONFIG_SENSORS_HDAPS is not set
# CONFIG_INTEL_MENLOW is not set
# CONFIG_ACPI_WMI is not set
# CONFIG_TOPSTAR_LAPTOP is not set
# CONFIG_TOSHIBA_BT_RFKILL is not set
# CONFIG_ACPI_CMPC is not set
# CONFIG_INTEL_IPS is not set
# CONFIG_IBM_RTL is not set
# CONFIG_XO15_EBOOK is not set
# CONFIG_SAMSUNG_LAPTOP is not set
# CONFIG_SAMSUNG_Q10 is not set
# CONFIG_APPLE_GMUX is not set
#
# Hardware Spinlock drivers
#
CONFIG_CLKEVT_I8253=y
CONFIG_I8253_LOCK=y
CONFIG_CLKBLD_I8253=y
CONFIG_IOMMU_SUPPORT=y
# CONFIG_AMD_IOMMU is not set
# CONFIG_INTEL_IOMMU is not set
# CONFIG_IRQ_REMAP is not set
#
# Remoteproc drivers (EXPERIMENTAL)
#
# CONFIG_STE_MODEM_RPROC is not set
#
# Rpmsg drivers (EXPERIMENTAL)
#
# CONFIG_VIRT_DRIVERS is not set
# CONFIG_PM_DEVFREQ is not set
# CONFIG_EXTCON is not set
# CONFIG_MEMORY is not set
# CONFIG_IIO is not set
# CONFIG_VME_BUS is not set
# CONFIG_PWM is not set
#
# Firmware Drivers
#
# CONFIG_EDD is not set
CONFIG_FIRMWARE_MEMMAP=y
# CONFIG_DELL_RBU is not set
CONFIG_DCDBAS=y
# CONFIG_DMIID is not set
# CONFIG_DMI_SYSFS is not set
# CONFIG_ISCSI_IBFT_FIND is not set
# CONFIG_GOOGLE_FIRMWARE is not set
#
# File systems
#
CONFIG_DCACHE_WORD_ACCESS=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
# CONFIG_JBD_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_FS_POSIX_ACL=y
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
CONFIG_DNOTIFY=y
CONFIG_INOTIFY_USER=y
# CONFIG_FANOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_QUOTACTL is not set
# CONFIG_AUTOFS4_FS is not set
CONFIG_FUSE_FS=m
# CONFIG_CUSE is not set
CONFIG_GENERIC_ACL=y
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
CONFIG_JOLIET=y
# CONFIG_ZISOFS is not set
CONFIG_UDF_FS=y
CONFIG_UDF_NLS=y
#
# DOS/FAT/NT Filesystems
#
CONFIG_FAT_FS=y
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_FAT_DEFAULT_CODEPAGE=437
CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
CONFIG_TMPFS_POSIX_ACL=y
CONFIG_TMPFS_XATTR=y
CONFIG_HUGETLBFS=y
CONFIG_HUGETLB_PAGE=y
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_ECRYPT_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_LOGFS is not set
CONFIG_CRAMFS=m
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_QNX6FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_PSTORE is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V2=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
# CONFIG_NFS_SWAP is not set
# CONFIG_NFS_V4_1 is not set
# CONFIG_ROOT_NFS is not set
# CONFIG_NFS_USE_LEGACY_DNS is not set
CONFIG_NFS_USE_KERNEL_DNS=y
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_RPCSEC_GSS_KRB5=m
# CONFIG_SUNRPC_DEBUG is not set
# CONFIG_CEPH_FS is not set
CONFIG_CIFS=m
# CONFIG_CIFS_STATS is not set
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_UPCALL is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_DFS_UPCALL is not set
# CONFIG_CIFS_SMB2 is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
CONFIG_NLS_CODEPAGE_437=y
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
CONFIG_NLS_ISO8859_15=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_MAC_ROMAN is not set
# CONFIG_NLS_MAC_CELTIC is not set
# CONFIG_NLS_MAC_CENTEURO is not set
# CONFIG_NLS_MAC_CROATIAN is not set
# CONFIG_NLS_MAC_CYRILLIC is not set
# CONFIG_NLS_MAC_GAELIC is not set
# CONFIG_NLS_MAC_GREEK is not set
# CONFIG_NLS_MAC_ICELAND is not set
# CONFIG_NLS_MAC_INUIT is not set
# CONFIG_NLS_MAC_ROMANIAN is not set
# CONFIG_NLS_MAC_TURKISH is not set
CONFIG_NLS_UTF8=y
#
# Kernel hacking
#
CONFIG_TRACE_IRQFLAGS_SUPPORT=y
CONFIG_PRINTK_TIME=y
CONFIG_DEFAULT_MESSAGE_LOGLEVEL=4
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_READABLE_ASM is not set
CONFIG_UNUSED_SYMBOLS=y
CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_SECTION_MISMATCH is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_LOCKUP_DETECTOR is not set
# CONFIG_PANIC_ON_OOPS is not set
CONFIG_PANIC_ON_OOPS_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=120
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_DEBUG_OBJECTS is not set
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
CONFIG_HAVE_DEBUG_KMEMLEAK=y
# CONFIG_DEBUG_KMEMLEAK is not set
CONFIG_DEBUG_PREEMPT=y
# CONFIG_DEBUG_RT_MUTEXES is not set
# CONFIG_RT_MUTEX_TESTER is not set
# CONFIG_DEBUG_SPINLOCK is not set
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_LOCK_ALLOC is not set
# CONFIG_PROVE_LOCKING is not set
# CONFIG_PROVE_RCU_DELAY is not set
CONFIG_SPARSE_RCU_POINTER=y
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_ATOMIC_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_INFO_REDUCED is not set
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_VIRTUAL is not set
# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_MEMORY_INIT=y
CONFIG_DEBUG_LIST=y
# CONFIG_TEST_LIST_SORT is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_DEBUG_CREDENTIALS is not set
CONFIG_ARCH_WANT_FRAME_POINTERS=y
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
CONFIG_RCU_CPU_STALL_VERBOSE=y
# CONFIG_RCU_CPU_STALL_INFO is not set
# CONFIG_RCU_TRACE is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_LKDTM is not set
# CONFIG_NOTIFIER_ERROR_INJECTION is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
CONFIG_DEBUG_PAGEALLOC=y
CONFIG_WANT_PAGE_DEBUG_FLAGS=y
CONFIG_PAGE_GUARD=y
CONFIG_USER_STACKTRACE_SUPPORT=y
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
CONFIG_HAVE_FENTRY=y
CONFIG_HAVE_C_RECORDMCOUNT=y
CONFIG_TRACE_CLOCK=y
CONFIG_RING_BUFFER=y
CONFIG_EVENT_TRACING=y
CONFIG_EVENT_POWER_TRACING_DEPRECATED=y
CONFIG_CONTEXT_SWITCH_TRACER=y
CONFIG_RING_BUFFER_ALLOW_SWAP=y
CONFIG_TRACING=y
CONFIG_GENERIC_TRACER=y
CONFIG_TRACING_SUPPORT=y
CONFIG_FTRACE=y
CONFIG_FUNCTION_TRACER=y
CONFIG_FUNCTION_GRAPH_TRACER=y
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
CONFIG_FTRACE_SYSCALLS=y
CONFIG_BRANCH_PROFILE_NONE=y
# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
# CONFIG_PROFILE_ALL_BRANCHES is not set
CONFIG_STACK_TRACER=y
# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_KPROBE_EVENT=y
CONFIG_UPROBE_EVENT=y
CONFIG_PROBE_EVENTS=y
CONFIG_DYNAMIC_FTRACE=y
# CONFIG_FUNCTION_PROFILER is not set
CONFIG_FTRACE_MCOUNT_RECORD=y
# CONFIG_FTRACE_STARTUP_TEST is not set
# CONFIG_MMIOTRACE is not set
# CONFIG_RING_BUFFER_BENCHMARK is not set
# CONFIG_RBTREE_TEST is not set
# CONFIG_INTERVAL_TREE_TEST is not set
# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set
# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_DMA_API_DEBUG is not set
# CONFIG_ATOMIC64_SELFTEST is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_KGDB=y
CONFIG_KGDB_SERIAL_CONSOLE=y
# CONFIG_KGDB_TESTS is not set
# CONFIG_KGDB_LOW_LEVEL_TRAP is not set
# CONFIG_KGDB_KDB is not set
CONFIG_HAVE_ARCH_KMEMCHECK=y
# CONFIG_TEST_KSTRTOX is not set
CONFIG_STRICT_DEVMEM=y
CONFIG_X86_VERBOSE_BOOTUP=y
CONFIG_EARLY_PRINTK=y
# CONFIG_EARLY_PRINTK_DBGP is not set
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_DEBUG_SET_MODULE_RONX=y
# CONFIG_DEBUG_NX_TEST is not set
# CONFIG_DEBUG_TLBFLUSH is not set
# CONFIG_IOMMU_DEBUG is not set
# CONFIG_IOMMU_STRESS is not set
CONFIG_HAVE_MMIOTRACE_SUPPORT=y
# CONFIG_X86_DECODER_SELFTEST is not set
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_IO_DELAY_TYPE_NONE=3
CONFIG_IO_DELAY_0X80=y
# CONFIG_IO_DELAY_0XED is not set
# CONFIG_IO_DELAY_UDELAY is not set
# CONFIG_IO_DELAY_NONE is not set
CONFIG_DEFAULT_IO_DELAY_TYPE=0
CONFIG_DEBUG_BOOT_PARAMS=y
# CONFIG_CPA_DEBUG is not set
# CONFIG_OPTIMIZE_INLINING is not set
# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set
# CONFIG_DEBUG_NMI_SELFTEST is not set
#
# Security options
#
CONFIG_KEYS=y
# CONFIG_ENCRYPTED_KEYS is not set
# CONFIG_KEYS_DEBUG_PROC_KEYS is not set
# CONFIG_SECURITY_DMESG_RESTRICT is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
CONFIG_DEFAULT_SECURITY_DAC=y
CONFIG_DEFAULT_SECURITY=""
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
CONFIG_CRYPTO_PCOMP2=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_USER is not set
CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y
CONFIG_CRYPTO_GF128MUL=y
CONFIG_CRYPTO_NULL=m
# CONFIG_CRYPTO_PCRYPT is not set
CONFIG_CRYPTO_WORKQUEUE=y
CONFIG_CRYPTO_CRYPTD=m
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
CONFIG_CRYPTO_CCM=m
CONFIG_CRYPTO_GCM=m
CONFIG_CRYPTO_SEQIV=m
#
# Block modes
#
CONFIG_CRYPTO_CBC=y
CONFIG_CRYPTO_CTR=m
CONFIG_CRYPTO_CTS=m
CONFIG_CRYPTO_ECB=m
CONFIG_CRYPTO_LRW=m
CONFIG_CRYPTO_PCBC=m
CONFIG_CRYPTO_XTS=m
#
# Hash modes
#
CONFIG_CRYPTO_HMAC=m
CONFIG_CRYPTO_XCBC=m
# CONFIG_CRYPTO_VMAC is not set
#
# Digest
#
CONFIG_CRYPTO_CRC32C=m
# CONFIG_CRYPTO_CRC32C_INTEL is not set
CONFIG_CRYPTO_GHASH=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
CONFIG_CRYPTO_SHA1=y
# CONFIG_CRYPTO_SHA1_SSSE3 is not set
CONFIG_CRYPTO_SHA256=m
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
# CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL is not set
#
# Ciphers
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_X86_64 is not set
# CONFIG_CRYPTO_AES_NI_INTEL is not set
CONFIG_CRYPTO_ANUBIS=m
CONFIG_CRYPTO_ARC4=m
CONFIG_CRYPTO_BLOWFISH=m
CONFIG_CRYPTO_BLOWFISH_COMMON=m
# CONFIG_CRYPTO_BLOWFISH_X86_64 is not set
CONFIG_CRYPTO_CAMELLIA=m
# CONFIG_CRYPTO_CAMELLIA_X86_64 is not set
CONFIG_CRYPTO_CAST5=m
# CONFIG_CRYPTO_CAST5_AVX_X86_64 is not set
CONFIG_CRYPTO_CAST6=m
# CONFIG_CRYPTO_CAST6_AVX_X86_64 is not set
CONFIG_CRYPTO_DES=y
CONFIG_CRYPTO_FCRYPT=m
CONFIG_CRYPTO_KHAZAD=m
CONFIG_CRYPTO_SALSA20=m
# CONFIG_CRYPTO_SALSA20_X86_64 is not set
CONFIG_CRYPTO_SEED=m
CONFIG_CRYPTO_SERPENT=m
# CONFIG_CRYPTO_SERPENT_SSE2_X86_64 is not set
# CONFIG_CRYPTO_SERPENT_AVX_X86_64 is not set
CONFIG_CRYPTO_TEA=m
CONFIG_CRYPTO_TWOFISH=m
CONFIG_CRYPTO_TWOFISH_COMMON=m
# CONFIG_CRYPTO_TWOFISH_X86_64 is not set
# CONFIG_CRYPTO_TWOFISH_X86_64_3WAY is not set
# CONFIG_CRYPTO_TWOFISH_AVX_X86_64 is not set
#
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
# CONFIG_CRYPTO_ZLIB is not set
CONFIG_CRYPTO_LZO=m
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
# CONFIG_CRYPTO_USER_API_HASH is not set
# CONFIG_CRYPTO_USER_API_SKCIPHER is not set
# CONFIG_CRYPTO_HW is not set
# CONFIG_ASYMMETRIC_KEY_TYPE is not set
CONFIG_HAVE_KVM=y
CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_HAVE_KVM_EVENTFD=y
CONFIG_KVM_APIC_ARCHITECTURE=y
CONFIG_KVM_MMIO=y
CONFIG_KVM_ASYNC_PF=y
CONFIG_HAVE_KVM_MSI=y
CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y
CONFIG_VIRTUALIZATION=y
CONFIG_KVM=m
CONFIG_KVM_INTEL=m
# CONFIG_KVM_AMD is not set
# CONFIG_KVM_MMU_AUDIT is not set
# CONFIG_VHOST_NET is not set
CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_STRNCPY_FROM_USER=y
CONFIG_GENERIC_STRNLEN_USER=y
CONFIG_GENERIC_FIND_FIRST_BIT=y
CONFIG_GENERIC_PCI_IOMAP=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_IO=y
CONFIG_CRC_CCITT=m
# CONFIG_CRC16 is not set
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
# CONFIG_CRC32_SELFTEST is not set
CONFIG_CRC32_SLICEBY8=y
# CONFIG_CRC32_SLICEBY4 is not set
# CONFIG_CRC32_SARWATE is not set
# CONFIG_CRC32_BIT is not set
CONFIG_CRC7=m
CONFIG_LIBCRC32C=m
# CONFIG_CRC8 is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=y
CONFIG_LZO_DECOMPRESS=y
CONFIG_XZ_DEC=y
CONFIG_XZ_DEC_X86=y
CONFIG_XZ_DEC_POWERPC=y
CONFIG_XZ_DEC_IA64=y
CONFIG_XZ_DEC_ARM=y
CONFIG_XZ_DEC_ARMTHUMB=y
CONFIG_XZ_DEC_SPARC=y
CONFIG_XZ_DEC_BCJ=y
# CONFIG_XZ_DEC_TEST is not set
CONFIG_DECOMPRESS_GZIP=y
CONFIG_DECOMPRESS_BZIP2=y
CONFIG_DECOMPRESS_LZMA=y
CONFIG_DECOMPRESS_XZ=y
CONFIG_DECOMPRESS_LZO=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_CPU_RMAP=y
CONFIG_DQL=y
CONFIG_NLATTR=y
CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
CONFIG_AVERAGE=y
# CONFIG_CORDIC is not set
# CONFIG_DDR is not set
^ permalink raw reply
* Re: [PATCH v3 2/6] PM / Runtime: introduce pm_runtime_set[get]_memalloc_noio()
From: Ming Lei @ 2012-10-30 11:30 UTC (permalink / raw)
To: Oliver Neukum
Cc: Alan Stern, linux-kernel, Minchan Kim, Greg Kroah-Hartman,
Rafael J. Wysocki, Jens Axboe, David S. Miller, Andrew Morton,
netdev, linux-usb, linux-pm, linux-mm
In-Reply-To: <2149424.HsnQpSLjK5@linux-lqwf.site>
Hi,
On Tue, Oct 30, 2012 at 6:57 PM, Oliver Neukum <oneukum@suse.de> wrote:
> how is this to work with power management domains?
Could you explain it in a bit detail? Why is PM domain involved?
Suppose PM domain is involved, its domain runtime_resume callback
is still run in the context with PF_MEMALLOC_NOIO flag set if the
affected 'device' is passed to the callback.
> And I may be dense, but disks are added in slave_configure().
> This seems to be a race to me.
Sorry, could you describe what is the race?
Suppose drivers set correct parent device to the disk device(gendisk),
then add the disk into device model via register_disk(), the solution
should be fine.
Thanks,
--
Ming Lei
^ permalink raw reply
* Re: Linux 3.7-rc3
From: Hugo Mills @ 2012-10-30 11:05 UTC (permalink / raw)
To: Rafael J. Wysocki
Cc: Linux Kernel Mailing List, Linus Torvalds, Linux PM list,
Greg Kroah-Hartman
In-Reply-To: <26004880.qboZkUVCy9@vostro.rjw.lan>
[-- Attachment #1: Type: text/plain, Size: 2659 bytes --]
On Tue, Oct 30, 2012 at 01:10:32AM +0100, Rafael J. Wysocki wrote:
> On Sunday, October 28, 2012 12:59:49 PM Linus Torvalds wrote:
> > It's been a week, time for -rc3!
> >
> > Nothing particularly stands out here. Lots of small fixes, exemplified
> > by the series of memory leak fixes in usb serial drivers. Just a lot
> > of random stuff..
> >
> > Most of it is drivers (all over: drm, wireless, staging, usb, sound),
> > but there's a few filesystem updates (nfs, btrfs, ext4), arch updates
> > (arm, x86 and m68k) and just random stuff. Shortlog appended.
>
> Unfortunately, s2disk is broken with this one and previous -rc. In the
> majority of cases it just hangs the machine during hibernation, although
> sometimes it returns to user space reporting freezing problems, suspicions
> RCU usage and similar stuff, pretty much without any useful debug information.
>
> I'm quite confident that v3.6 was OK (and -stable based on that too), so
> it most likely is a recent regression. The in-kernel hibernation
> (ie. "echo disk > /sys/power/state") works no problem. So does suspend to
> RAM on my test boxes.
>
> So far I have been able to reproduce this 100% of the time on two machines
> with Intel CPUs and graphics driven by i915. I _suspect_ that this may be
> related to VT switching, because s2disk does some ugly things in that area
> which are not done by the in-kernel code. Dunno.
I've had this symptom on my laptop (Thinkpad Edge 13, Intel
graphics & CPU; I can get details when I get back home in about 8
hours), but only with 3.7-rc2. It was definitely working in 3.6, and
seems to be OK in 3.7-rc3, although I've only tried two cycles of that
last night.
When I did suspend to disk, I get a blank screen (but clearly with
backlight still on), and a blinking text-mode cursor in the top left.
I left it for half an hour once, and nothing changed, so I'm fairly
sure it was properly hung. I've not seen it return to user space with
errors at all -- just the hang.
> Anyway, it looks like nothing short of bisection is going to help debug this,
> but I'm afraid I won't have the time to bisect within the next two weeks, so if
> anyone can reproduce this issue and will be able to bisect it, please help
> (openSUSE/Tumbleweed users anyone?).
I can try to bisect the 3.6 -> 3.7-rc2 failure, if that helps? But
as I said, I've got it working on -rc3, so I may not have the same
problem.
Hugo.
--
=== Hugo Mills: hugo@... carfax.org.uk | darksatanic.net | lug.org.uk ===
PGP key: 515C238D from wwwkeys.eu.pgp.net or http://www.carfax.org.uk
--- UNIX: Spanish manufacturer of fire extinguishers. ---
[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 828 bytes --]
^ permalink raw reply
* Re: [PATCH v3 2/6] PM / Runtime: introduce pm_runtime_set[get]_memalloc_noio()
From: Oliver Neukum @ 2012-10-30 10:57 UTC (permalink / raw)
To: Ming Lei
Cc: Alan Stern, linux-kernel, Minchan Kim, Greg Kroah-Hartman,
Rafael J. Wysocki, Jens Axboe, David S. Miller, Andrew Morton,
netdev, linux-usb, linux-pm, linux-mm
In-Reply-To: <CACVXFVOPDu6wVgPmvtTkokn7VV41x3XVvL4g_E0pz0mikUbvUg@mail.gmail.com>
On Tuesday 30 October 2012 11:21:33 Ming Lei wrote:
> On Mon, Oct 29, 2012 at 11:41 PM, Alan Stern <stern@rowland.harvard.edu> wrote:
> > On Mon, 29 Oct 2012, Ming Lei wrote:
> >
> >> The patch introduces the flag of memalloc_noio_resume in
> >> 'struct dev_pm_info' to help PM core to teach mm not allocating
> >> memory with GFP_KERNEL flag for avoiding probable deadlock
> >> problem.
> >>
> >> As explained in the comment, any GFP_KERNEL allocation inside
> >> runtime_resume on any one of device in the path from one block
> >> or network device to the root device in the device tree may cause
> >> deadlock, the introduced pm_runtime_set_memalloc_noio() sets or
> >> clears the flag on device of the path recursively.
> >>
> >> This patch also introduces pm_runtime_get_memalloc_noio() because
> >> the flag may be accessed in block device's error handling path
> >> (for example, usb device reset)
> >
> >> +/*
> >> + * pm_runtime_get_memalloc_noio - Get a device's memalloc_noio flag.
> >> + * @dev: Device to handle.
> >> + *
> >> + * Return the device's memalloc_noio flag.
> >> + *
> >> + * The device power lock is held because bitfield is not SMP-safe.
> >> + */
> >> +bool pm_runtime_get_memalloc_noio(struct device *dev)
> >> +{
> >> + bool ret;
> >> + spin_lock_irq(&dev->power.lock);
> >> + ret = dev->power.memalloc_noio_resume;
> >> + spin_unlock_irq(&dev->power.lock);
> >> + return ret;
> >> +}
> >
> > You don't need to acquire and release a spinlock just to read the
> > value. Reading bitfields _is_ SMP-safe; writing them is not.
>
> Thanks for your review.
>
> As you pointed out before, the flag need to be checked before
> resetting usb devices, so the lock should be held to make another
> context(CPU) see the updated value suppose one context(CPU)
> call pm_runtime_set_memalloc_noio() to change the flag at the
> same time.
>
> The lock needn't to be held when the function is called inside
> pm_runtime_set_memalloc_noio(), so the bitfield flag should
> be checked directly without holding power lock in dev_memalloc_noio().
Hi,
how is this to work with power management domains?
And I may be dense, but disks are added in slave_configure().
This seems to be a race to me.
Regards
Oliver
^ permalink raw reply
* Re: [PATCH v4 0/5] Migrate SCSI drivers to use dev_pm_ops
From: Aaron Lu @ 2012-10-30 10:17 UTC (permalink / raw)
To: James Bottomley
Cc: Alan Stern, Rafael J. Wysocki, linux-scsi, linux-pm, Aaron Lu
In-Reply-To: <1350293219-8154-1-git-send-email-aaron.lu@intel.com>
Hi James,
Sorry to bother you, will this patchset enter 3.8?
Thanks,
Aaron
On Mon, Oct 15, 2012 at 05:26:54PM +0800, Aaron Lu wrote:
> v4:
> Only Patch 4 is modified:
> Fixed a line over 80 characters warning by checkpatch.pl;
> Update the changelog so that it is no more a try :-)
>
> v3:
> Only patch 4 is modified:
> Remove the special case for system freeze in scsi_bus_suspend_common
> as pointed out by Alan Stern;
> Updated some comments;
> Removed the use of typedef (*pm_callback_t)(struct device *).
>
> v2:
> Change the runtime suspend behaviour of sd driver by putting the device
> into stopped power state.
> Revert 2 patches which are no longer needed as pointed out by Alan Stern.
> Find out device callbacks in bus callbacks as suggested by Alan Stern.
>
> Due to these changes, patch number grows from 2 -> 5.
>
> v1:
> The 2 patches will migrate SCSI drivers to use the pm callbacks defined
> in dev_pm_ops as pm_message is deprecated and should not be used by driver.
> Bus level callback is changed to use callbacks defined in dev_pm_ops when
> needed and sd's pm callback is updated to use what are defined in dev_pm_ops.
>
>
> Aaron Lu (5):
> sd: put to stopped power state when runtime suspend
> Revert "[SCSI] scsi_pm: set device runtime state before parent
> suspended"
> Revert "[SCSI] runtime resume parent for child's system-resume"
> pm: use callbacks from dev_pm_ops for scsi devices
> sd: update sd to use the new pm callbacks
>
> drivers/scsi/scsi_pm.c | 98 +++++++++++++++++++++++++++-----------------------
> drivers/scsi/sd.c | 18 +++++++---
> 2 files changed, 67 insertions(+), 49 deletions(-)
>
> --
> 1.7.12.21.g871e293
>
^ permalink raw reply
* Re: Linux 3.7-rc3
From: Arend van Spriel @ 2012-10-30 10:10 UTC (permalink / raw)
To: Rafael J. Wysocki
Cc: Linux Kernel Mailing List, Linus Torvalds, Linux PM list,
Greg Kroah-Hartman, Hante Meuleman
In-Reply-To: <26004880.qboZkUVCy9@vostro.rjw.lan>
On 10/30/2012 01:10 AM, Rafael J. Wysocki wrote:
> On Sunday, October 28, 2012 12:59:49 PM Linus Torvalds wrote:
>> It's been a week, time for -rc3!
>>
>> Nothing particularly stands out here. Lots of small fixes, exemplified
>> by the series of memory leak fixes in usb serial drivers. Just a lot
>> of random stuff..
>>
>> Most of it is drivers (all over: drm, wireless, staging, usb, sound),
>> but there's a few filesystem updates (nfs, btrfs, ext4), arch updates
>> (arm, x86 and m68k) and just random stuff. Shortlog appended.
>
> Unfortunately, s2disk is broken with this one and previous -rc. In the
> majority of cases it just hangs the machine during hibernation, although
> sometimes it returns to user space reporting freezing problems, suspicions
> RCU usage and similar stuff, pretty much without any useful debug information.
>
> I'm quite confident that v3.6 was OK (and -stable based on that too), so
> it most likely is a recent regression. The in-kernel hibernation
> (ie. "echo disk > /sys/power/state") works no problem. So does suspend to
> RAM on my test boxes.
Since v3.7-rc1 I am seeing suspend to RAM fail as well. It was obscured
by a nouveau recursive locking issue on my machine. I reverted the 3.7
DRM merged completely. From there "echo mem > /sys/power/state" works,
but choosing suspend like most mere mortals do results in suspend, but
attempt to resume brings me straight to the BIOS starting anew.
> So far I have been able to reproduce this 100% of the time on two machines
> with Intel CPUs and graphics driven by i915. I _suspect_ that this may be
> related to VT switching, because s2disk does some ugly things in that area
> which are not done by the in-kernel code. Dunno.
>
> Anyway, it looks like nothing short of bisection is going to help debug this,
> but I'm afraid I won't have the time to bisect within the next two weeks, so if
> anyone can reproduce this issue and will be able to bisect it, please help
> (openSUSE/Tumbleweed users anyone?).
>
> Thanks,
> Rafael
>
>
Not sure if it has the same root cause. Since DRM revert did not work
for me I put my money on ACPI (not a lot of money though ;-) ).
Gr. AvS
^ permalink raw reply
* Re: Linux 3.7-rc3
From: Jiri Kosina @ 2012-10-30 9:50 UTC (permalink / raw)
To: Rafael J. Wysocki
Cc: Linux Kernel Mailing List, Linus Torvalds, Linux PM list,
Greg Kroah-Hartman
In-Reply-To: <26004880.qboZkUVCy9@vostro.rjw.lan>
On Tue, 30 Oct 2012, Rafael J. Wysocki wrote:
> > Nothing particularly stands out here. Lots of small fixes, exemplified
> > by the series of memory leak fixes in usb serial drivers. Just a lot
> > of random stuff..
> >
> > Most of it is drivers (all over: drm, wireless, staging, usb, sound),
> > but there's a few filesystem updates (nfs, btrfs, ext4), arch updates
> > (arm, x86 and m68k) and just random stuff. Shortlog appended.
>
> Unfortunately, s2disk is broken with this one and previous -rc. In the
> majority of cases it just hangs the machine during hibernation, although
> sometimes it returns to user space reporting freezing problems, suspicions
> RCU usage and similar stuff, pretty much without any useful debug information.
>
> I'm quite confident that v3.6 was OK (and -stable based on that too), so
> it most likely is a recent regression. The in-kernel hibernation
> (ie. "echo disk > /sys/power/state") works no problem. So does suspend to
> RAM on my test boxes.
>
> So far I have been able to reproduce this 100% of the time on two machines
> with Intel CPUs and graphics driven by i915. I _suspect_ that this may be
> related to VT switching, because s2disk does some ugly things in that area
> which are not done by the in-kernel code. Dunno.
>
> Anyway, it looks like nothing short of bisection is going to help debug this,
> but I'm afraid I won't have the time to bisect within the next two weeks, so if
> anyone can reproduce this issue and will be able to bisect it, please help
> (openSUSE/Tumbleweed users anyone?).
Just a data point here -- this is probably not generally true.
I am using s2disk very often on my x200s, and I haven't hit this problem
so far (currently running 2ab3f29, i.e. slightly before rc3).
--
Jiri Kosina
SUSE Labs
^ permalink raw reply
* Re: [PATCH V2 2/6] Thermal: make sure cpufreq cooling register after cpufreq driver
From: Hongbo Zhang @ 2012-10-30 8:59 UTC (permalink / raw)
To: Amit Kachhap
Cc: linaro-dev, linux-kernel, linux-pm, STEricsson_nomadik_linux,
kernel, linaro-kernel, hongbo.zhang, patches
In-Reply-To: <CAK44p22G4ri9KBYiLMCK9SThgFxofz66LVgUY28SepaC+YBDdw@mail.gmail.com>
On 29 October 2012 12:42, Amit Kachhap <amit.kachhap@linaro.org> wrote:
> On 24 October 2012 17:28, hongbo.zhang <hongbo.zhang@linaro.org> wrote:
>> From: "hongbo.zhang" <hongbo.zhang@linaro.com>
>>
>> The cpufreq works as a cooling device, so the cooling layer should check if the
>> cpufreq driver is initialized or not.
>>
>> Signed-off-by: hongbo.zhang <hongbo.zhang@linaro.com>
>> ---
>> drivers/thermal/cpu_cooling.c | 4 ++++
>> 1 file changed, 4 insertions(+)
>>
>> diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c
>> index b6b4c2a..7519a0b 100644
>> --- a/drivers/thermal/cpu_cooling.c
>> +++ b/drivers/thermal/cpu_cooling.c
>> @@ -354,6 +354,10 @@ struct thermal_cooling_device *cpufreq_cooling_register(
>> int ret = 0, i;
>> struct cpufreq_policy policy;
>>
>> + /* make sure cpufreq driver has been initialized */
>> + if (!cpufreq_frequency_get_table(cpumask_any(clip_cpus)))
>> + return ERR_PTR(-EPROBE_DEFER);
>> +
> Hi Hongbo,
>
> I am not against this change but this might cause unnecessary delay in
> probe thread. I also thought about it but have not put this
> restriction. Actually you can put a check in platform_bind for this
> condition and defer the binding till the time actual throttling
> starts. So basically only after throttling cpufreq_table is needed.
> (See my implementation exynos_thermal.c).
In fact, this piece of checking code was in my
db8500_cpufreq_cooling_probe() before, I will move it back there
again, and the ST-E's policy is separating cooling devs and thermal
zone, so cannot be in binding function on my platform, only in probe
function instead.
>
> Thanks,
> Amit Daniel
>> list_for_each_entry(cpufreq_dev, &cooling_cpufreq_list, node)
>> cpufreq_dev_count++;
>>
>> --
>> 1.7.11.3
>>
>>
>> _______________________________________________
>> linaro-dev mailing list
>> linaro-dev@lists.linaro.org
>> http://lists.linaro.org/mailman/listinfo/linaro-dev
^ permalink raw reply
* Re: [RFD][PATCH 5/7] PM / QoS: Make it possible to expose PM QoS device flags to user space
From: Aaron Lu @ 2012-10-30 8:53 UTC (permalink / raw)
To: Rafael J. Wysocki
Cc: Linux PM list, ACPI Devel Mailing List, Alan Stern, Huang Ying,
Sarah Sharp, Lan Tianyu, Jean Pihet, linux-pci,
Greg Kroah-Hartman, mark gross
In-Reply-To: <201209282355.31823.rjw@sisk.pl>
On 09/29/2012 05:55 AM, Rafael J. Wysocki wrote:
> Define two device PM QoS flags, PM_QOS_FLAG_NO_POWER_OFF
> and PM_QOS_FLAG_REMOTE_WAKEUP, and introduce routines
> dev_pm_qos_expose_flags() and dev_pm_qos_hide_flags() allowing the
> caller to expose those two flags to user space or to hide them
> from it, respectively.
>
> After the flags have been exposed, user space will see two
> additional sysfs attributes, pm_qos_no_power_off and
> pm_qos_remote_wakeup, under the device's /sys/devices/.../power/
> directory. Then, writing 1 to one of them will update the
> PM QoS flags request owned by user space so that the corresponding
> flag is requested to be set. In turn, writing 0 to one of them
> will cause the corresponding flag in the user space's request to
> be cleared (however, the owners of the other PM QoS flags requests
> for the same device may still request the flag to be set and it
> may be effectively set even if user space doesn't request that).
>
> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
> ---
> Documentation/ABI/testing/sysfs-devices-power | 31 ++++
> drivers/base/power/power.h | 6
> drivers/base/power/qos.c | 169 ++++++++++++++++++++------
> drivers/base/power/sysfs.c | 95 +++++++++++++-
> include/linux/pm.h | 1
> include/linux/pm_qos.h | 26 ++++
> 6 files changed, 280 insertions(+), 48 deletions(-)
>
> Index: linux/drivers/base/power/qos.c
> ===================================================================
> --- linux.orig/drivers/base/power/qos.c
> +++ linux/drivers/base/power/qos.c
> @@ -40,6 +40,7 @@
> #include <linux/device.h>
> #include <linux/mutex.h>
> #include <linux/export.h>
> +#include <linux/pm_runtime.h>
>
> #include "power.h"
>
> @@ -322,6 +323,38 @@ int dev_pm_qos_add_request(struct device
> EXPORT_SYMBOL_GPL(dev_pm_qos_add_request);
>
> /**
> + * __dev_pm_qos_update_request - Modify an existing device PM QoS request.
> + * @req : PM QoS request to modify.
> + * @new_value: New value to request.
> + */
> +int __dev_pm_qos_update_request(struct dev_pm_qos_request *req, s32 new_value)
> +{
> + s32 curr_value;
> + int ret = 0;
> +
> + if (!req->dev->power.qos) {
> + ret = -ENODEV;
> + goto out;
> + }
> +
> + switch(req->type) {
> + case DEV_PM_QOS_LATENCY:
> + curr_value = req->data.pnode.prio;
> + break;
> + case DEV_PM_QOS_FLAGS:
> + curr_value = req->data.flr.flags;
> + break;
> + default:
> + return -EINVAL;
> + }
> +
> + if (curr_value != new_value)
> + ret = apply_constraint(req, PM_QOS_UPDATE_REQ, new_value);
> +
> + return ret;
> +}
> +
> +/**
> * dev_pm_qos_update_request - modifies an existing qos request
> * @req : handle to list element holding a dev_pm_qos request to use
> * @new_value: defines the qos request
> @@ -336,11 +369,9 @@ EXPORT_SYMBOL_GPL(dev_pm_qos_add_request
> * -EINVAL in case of wrong parameters, -ENODEV if the device has been
> * removed from the system
> */
> -int dev_pm_qos_update_request(struct dev_pm_qos_request *req,
> - s32 new_value)
> +int dev_pm_qos_update_request(struct dev_pm_qos_request *req, s32 new_value)
> {
> - s32 curr_value;
> - int ret = 0;
> + int ret;
>
> if (!req) /*guard against callers passing in null */
> return -EINVAL;
> @@ -350,29 +381,9 @@ int dev_pm_qos_update_request(struct dev
> return -EINVAL;
>
> mutex_lock(&dev_pm_qos_mtx);
> -
> - if (!req->dev->power.qos) {
> - ret = -ENODEV;
> - goto out;
> - }
> -
> - switch(req->type) {
> - case DEV_PM_QOS_LATENCY:
> - curr_value = req->data.pnode.prio;
> - break;
> - case DEV_PM_QOS_FLAGS:
> - curr_value = req->data.flr.flags;
> - break;
> - default:
> - ret = -EINVAL;
> - goto out;
> - }
> -
> - if (curr_value != new_value)
> - ret = apply_constraint(req, PM_QOS_UPDATE_REQ, new_value);
> -
> - out:
> + __dev_pm_qos_update_request(req, new_value);
You forgot to assign the return value here.
Thanks,
Aaron
> mutex_unlock(&dev_pm_qos_mtx);
> +
> return ret;
> }
> EXPORT_SYMBOL_GPL(dev_pm_qos_update_request);
> @@ -533,10 +544,19 @@ int dev_pm_qos_add_ancestor_request(stru
> EXPORT_SYMBOL_GPL(dev_pm_qos_add_ancestor_request);
^ permalink raw reply
* Re: [PATCH V2 4/6] Thermal: Remove the cooling_cpufreq_list.
From: Hongbo Zhang @ 2012-10-30 8:53 UTC (permalink / raw)
To: Amit Kachhap
Cc: linaro-dev, linux-kernel, linux-pm, STEricsson_nomadik_linux,
kernel, linaro-kernel, hongbo.zhang, patches
In-Reply-To: <CAK44p21QhTT0xwUh4d8CzoN3R0Qoz4uXGSu4=a3s7cT49YicNQ@mail.gmail.com>
On 30 October 2012 09:03, Amit Kachhap <amit.kachhap@linaro.org> wrote:
> On 26 October 2012 12:39, hongbo.zhang <hongbo.zhang@linaro.org> wrote:
>> From: "hongbo.zhang" <hongbo.zhang@linaro.com>
>>
>> Problem of using this list is that the cpufreq_get_max_state callback will be
>> called when register cooling device by thermal_cooling_device_register, but
>> this list isn't ready at this moment. What's more, there is no need to maintain
>> such a list, we can get cpufreq_cooling_device instance by the private
>> thermal_cooling_device.devdata.
>
> Hi,
>
> Removing this list seems fine as most of frequency checks are moved
> inside generic thermal layer.
> Some minor review comments below,
>
> Reviewed-by: Amit Daniel Kachhap <amit.kachhap@linaro.org>
Thanks.
>>
>> Signed-off-by: hongbo.zhang <hongbo.zhang@linaro.com>
>> ---
>> drivers/thermal/cpu_cooling.c | 91 +++++++++----------------------------------
>> 1 file changed, 19 insertions(+), 72 deletions(-)
>>
>> diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c
>> index 415b041..2ffd12c 100644
>> --- a/drivers/thermal/cpu_cooling.c
>> +++ b/drivers/thermal/cpu_cooling.c
>> @@ -58,8 +58,9 @@ struct cpufreq_cooling_device {
>> };
>> static LIST_HEAD(cooling_cpufreq_list);
>> static DEFINE_IDR(cpufreq_idr);
>> +static DEFINE_MUTEX(cooling_cpufreq_lock);
>>
>> -static struct mutex cooling_cpufreq_lock;
>> +static unsigned int cpufreq_dev_count;
>>
>> /* notify_table passes value to the CPUFREQ_ADJUST callback function. */
>> #define NOTIFY_INVALID NULL
>> @@ -240,28 +241,18 @@ static int cpufreq_thermal_notifier(struct notifier_block *nb,
>> static int cpufreq_get_max_state(struct thermal_cooling_device *cdev,
>> unsigned long *state)
>> {
>> - int ret = -EINVAL, i = 0;
>> - struct cpufreq_cooling_device *cpufreq_device;
>> - struct cpumask *maskPtr;
>> + struct cpufreq_cooling_device *cpufreq_device = cdev->devdata;
> check cdev is not null.
>> + struct cpumask *maskPtr = &cpufreq_device->allowed_cpus;
>> unsigned int cpu;
>> struct cpufreq_frequency_table *table;
>> unsigned long count = 0;
>> + int i = 0;
>>
>> - mutex_lock(&cooling_cpufreq_lock);
>> - list_for_each_entry(cpufreq_device, &cooling_cpufreq_list, node) {
>> - if (cpufreq_device && cpufreq_device->cool_dev == cdev)
>> - break;
>> - }
>> - if (cpufreq_device == NULL)
>> - goto return_get_max_state;
>> -
>> - maskPtr = &cpufreq_device->allowed_cpus;
>> cpu = cpumask_any(maskPtr);
>> table = cpufreq_frequency_get_table(cpu);
>> if (!table) {
>> *state = 0;
>> - ret = 0;
>> - goto return_get_max_state;
>> + return 0;
>> }
>>
>> for (i = 0; (table[i].frequency != CPUFREQ_TABLE_END); i++) {
>> @@ -272,12 +263,10 @@ static int cpufreq_get_max_state(struct thermal_cooling_device *cdev,
>>
>> if (count > 0) {
>> *state = --count;
>> - ret = 0;
>> + return 0;
>> }
>>
>> -return_get_max_state:
>> - mutex_unlock(&cooling_cpufreq_lock);
>> - return ret;
>> + return -EINVAL;
>> }
>>
>> /**
>> @@ -288,20 +277,10 @@ return_get_max_state:
>> static int cpufreq_get_cur_state(struct thermal_cooling_device *cdev,
>> unsigned long *state)
>> {
>> - int ret = -EINVAL;
>> - struct cpufreq_cooling_device *cpufreq_device;
>> + struct cpufreq_cooling_device *cpufreq_device = cdev->devdata;
>>
>> - mutex_lock(&cooling_cpufreq_lock);
>> - list_for_each_entry(cpufreq_device, &cooling_cpufreq_list, node) {
>> - if (cpufreq_device && cpufreq_device->cool_dev == cdev) {
>> - *state = cpufreq_device->cpufreq_state;
>> - ret = 0;
>> - break;
>> - }
>> - }
>> - mutex_unlock(&cooling_cpufreq_lock);
>> -
>> - return ret;
>> + *state = cpufreq_device->cpufreq_state;
>> + return 0;
>> }
>>
>> /**
>> @@ -312,22 +291,9 @@ static int cpufreq_get_cur_state(struct thermal_cooling_device *cdev,
>> static int cpufreq_set_cur_state(struct thermal_cooling_device *cdev,
>> unsigned long state)
>> {
>> - int ret = -EINVAL;
>> - struct cpufreq_cooling_device *cpufreq_device;
>> + struct cpufreq_cooling_device *cpufreq_device = cdev->devdata;
> check cdev is not null
Such values are used in all the three static cpufreq_***_state
callback functions, when these functions are called, cdev->devdata
should have been set in the registration function, and cannot be null,
no body can call these function before registration, so I think there
is no need to add such a check here.
>>
>> - mutex_lock(&cooling_cpufreq_lock);
>> - list_for_each_entry(cpufreq_device, &cooling_cpufreq_list, node) {
>> - if (cpufreq_device && cpufreq_device->cool_dev == cdev) {
>> - ret = 0;
>> - break;
>> - }
>> - }
>> - if (!ret)
>> - ret = cpufreq_apply_cooling(cpufreq_device, state);
>> -
>> - mutex_unlock(&cooling_cpufreq_lock);
>> -
>> - return ret;
>> + return cpufreq_apply_cooling(cpufreq_device, state);
>> }
>>
>> /* Bind cpufreq callbacks to thermal cooling device ops */
>> @@ -351,7 +317,7 @@ struct thermal_cooling_device *cpufreq_cooling_register(
>> {
>> struct thermal_cooling_device *cool_dev;
>> struct cpufreq_cooling_device *cpufreq_dev = NULL;
>> - unsigned int cpufreq_dev_count = 0, min = 0, max = 0;
>> + unsigned int min = 0, max = 0;
>> char dev_name[THERMAL_NAME_LENGTH];
>> int ret = 0, i;
>> struct cpufreq_policy policy;
>> @@ -360,9 +326,6 @@ struct thermal_cooling_device *cpufreq_cooling_register(
>> if (!cpufreq_frequency_get_table(cpumask_any(clip_cpus)))
>> return ERR_PTR(-EPROBE_DEFER);
>>
>> - list_for_each_entry(cpufreq_dev, &cooling_cpufreq_list, node)
>> - cpufreq_dev_count++;
>> -
>> /*Verify that all the clip cpus have same freq_min, freq_max limit*/
>> for_each_cpu(i, clip_cpus) {
>> /*continue if cpufreq policy not found and not return error*/
>> @@ -384,9 +347,6 @@ struct thermal_cooling_device *cpufreq_cooling_register(
>>
>> cpumask_copy(&cpufreq_dev->allowed_cpus, clip_cpus);
>>
>> - if (cpufreq_dev_count == 0)
>> - mutex_init(&cooling_cpufreq_lock);
>> -
>> ret = get_idr(&cpufreq_idr, &cpufreq_dev->id);
>> if (ret) {
>> kfree(cpufreq_dev);
>> @@ -405,12 +365,12 @@ struct thermal_cooling_device *cpufreq_cooling_register(
>> cpufreq_dev->cool_dev = cool_dev;
>> cpufreq_dev->cpufreq_state = 0;
>> mutex_lock(&cooling_cpufreq_lock);
>> - list_add_tail(&cpufreq_dev->node, &cooling_cpufreq_list);
>>
>> /* Register the notifier for first cpufreq cooling device */
>> if (cpufreq_dev_count == 0)
>> cpufreq_register_notifier(&thermal_cpufreq_notifier_block,
>> CPUFREQ_POLICY_NOTIFIER);
>> + cpufreq_dev_count++;
>>
>> mutex_unlock(&cooling_cpufreq_lock);
>> return cool_dev;
>> @@ -423,33 +383,20 @@ EXPORT_SYMBOL(cpufreq_cooling_register);
>> */
>> void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev)
>> {
>> - struct cpufreq_cooling_device *cpufreq_dev = NULL;
>> - unsigned int cpufreq_dev_count = 0;
>> + struct cpufreq_cooling_device *cpufreq_dev = cdev->devdata;
>>
>> mutex_lock(&cooling_cpufreq_lock);
>> - list_for_each_entry(cpufreq_dev, &cooling_cpufreq_list, node) {
>> - if (cpufreq_dev && cpufreq_dev->cool_dev == cdev)
>> - break;
>> - cpufreq_dev_count++;
>> - }
>> -
>> - if (!cpufreq_dev || cpufreq_dev->cool_dev != cdev) {
>> - mutex_unlock(&cooling_cpufreq_lock);
>> - return;
>> - }
>> -
>> - list_del(&cpufreq_dev->node);
>> + cpufreq_dev_count--;
>>
>> /* Unregister the notifier for the last cpufreq cooling device */
>> - if (cpufreq_dev_count == 1) {
>> + if (cpufreq_dev_count == 0) {
>> cpufreq_unregister_notifier(&thermal_cpufreq_notifier_block,
>> CPUFREQ_POLICY_NOTIFIER);
>> }
>> mutex_unlock(&cooling_cpufreq_lock);
>> +
>> thermal_cooling_device_unregister(cpufreq_dev->cool_dev);
>> release_idr(&cpufreq_idr, cpufreq_dev->id);
>> - if (cpufreq_dev_count == 1)
>> - mutex_destroy(&cooling_cpufreq_lock);
>> kfree(cpufreq_dev);
>> }
>> EXPORT_SYMBOL(cpufreq_cooling_unregister);
>> --
>> 1.7.11.3
>>
>>
>> _______________________________________________
>> linaro-dev mailing list
>> linaro-dev@lists.linaro.org
>> http://lists.linaro.org/mailman/listinfo/linaro-dev
^ permalink raw reply
* Re: Re: [linux-next PATCH] PM / devfreq: documentation cleanups for devfreq header
From: MyungJoo Ham @ 2012-10-30 8:09 UTC (permalink / raw)
To: Randy Dunlap, Nishanth Menon
Cc: linux-pm@vger.kernel.org, Rajagopal Venkat,
박경민, Rafael J. Wysocki, Kevin Hilman,
linux-kernel@vger.kernel.org, 이종화
> On 10/29/2012 06:02 AM, Nishanth Menon wrote:
>
> > struct parameters need to have ':' in documentation for
> > scripts/kernel-doc to parse appropriately.
> >
> > Fix the errors reported by:
> > ./scripts/kernel-doc include/linux/devfreq.h >/dev/null
> >
> > Cc: Rajagopal Venkat <rajagopal.venkat@linaro.org>
> > Cc: MyungJoo Ham <myungjoo.ham@samsung.com>
> > Cc: Kyungmin Park <kyungmin.park@samsung.com>
> > Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
> > Cc: Kevin Hilman <khilman@ti.com>
> > Cc: linux-pm@vger.kernel.org
> > Cc: linux-kernel@vger.kernel.org
> >
> > Signed-off-by: Nishanth Menon <nm@ti.com>
>
>
> Acked-by: Randy Dunlap <rdunlap@xenotime.net>
>
> Thanks.
Acked-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Applying to git://git.kernel.org/pub/scm/linux/kernel/git/mzx/devfreq.git for-rafael, which is based on rafael's linux-pm.git / linux-next.
http://git.kernel.org/?p=linux/kernel/git/mzx/devfreq.git;a=shortlog;h=refs/heads/for-rafael
I'll apply your "Add sysfs node ..." patch after refactoring with Jonghwa's (devfreq trans_stat) as the two patches use the same data (list of available freqs).
Cheers,
MyungJoo
>
> > ---
> > Applies on
> > linux-next e083feb Merge branch 'acpi-next' into linux-next
> > git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git
> >
> > include/linux/devfreq.h | 54 +++++++++++++++++++++++------------------------
> > 1 file changed, 27 insertions(+), 27 deletions(-)
> >
^ permalink raw reply
* Re: [PATCH V2 4/6] Thermal: Remove the cooling_cpufreq_list.
From: Amit Kachhap @ 2012-10-30 8:03 UTC (permalink / raw)
To: hongbo.zhang
Cc: linaro-dev, linux-kernel, linux-pm, STEricsson_nomadik_linux,
kernel, linaro-kernel, hongbo.zhang, patches
In-Reply-To: <1351235345-13050-1-git-send-email-hongbo.zhang@linaro.com>
On 26 October 2012 12:39, hongbo.zhang <hongbo.zhang@linaro.org> wrote:
> From: "hongbo.zhang" <hongbo.zhang@linaro.com>
>
> Problem of using this list is that the cpufreq_get_max_state callback will be
> called when register cooling device by thermal_cooling_device_register, but
> this list isn't ready at this moment. What's more, there is no need to maintain
> such a list, we can get cpufreq_cooling_device instance by the private
> thermal_cooling_device.devdata.
Hi,
Removing this list seems fine as most of frequency checks are moved
inside generic thermal layer.
Some minor review comments below,
Reviewed-by: Amit Daniel Kachhap <amit.kachhap@linaro.org>
>
> Signed-off-by: hongbo.zhang <hongbo.zhang@linaro.com>
> ---
> drivers/thermal/cpu_cooling.c | 91 +++++++++----------------------------------
> 1 file changed, 19 insertions(+), 72 deletions(-)
>
> diff --git a/drivers/thermal/cpu_cooling.c b/drivers/thermal/cpu_cooling.c
> index 415b041..2ffd12c 100644
> --- a/drivers/thermal/cpu_cooling.c
> +++ b/drivers/thermal/cpu_cooling.c
> @@ -58,8 +58,9 @@ struct cpufreq_cooling_device {
> };
> static LIST_HEAD(cooling_cpufreq_list);
> static DEFINE_IDR(cpufreq_idr);
> +static DEFINE_MUTEX(cooling_cpufreq_lock);
>
> -static struct mutex cooling_cpufreq_lock;
> +static unsigned int cpufreq_dev_count;
>
> /* notify_table passes value to the CPUFREQ_ADJUST callback function. */
> #define NOTIFY_INVALID NULL
> @@ -240,28 +241,18 @@ static int cpufreq_thermal_notifier(struct notifier_block *nb,
> static int cpufreq_get_max_state(struct thermal_cooling_device *cdev,
> unsigned long *state)
> {
> - int ret = -EINVAL, i = 0;
> - struct cpufreq_cooling_device *cpufreq_device;
> - struct cpumask *maskPtr;
> + struct cpufreq_cooling_device *cpufreq_device = cdev->devdata;
check cdev is not null.
> + struct cpumask *maskPtr = &cpufreq_device->allowed_cpus;
> unsigned int cpu;
> struct cpufreq_frequency_table *table;
> unsigned long count = 0;
> + int i = 0;
>
> - mutex_lock(&cooling_cpufreq_lock);
> - list_for_each_entry(cpufreq_device, &cooling_cpufreq_list, node) {
> - if (cpufreq_device && cpufreq_device->cool_dev == cdev)
> - break;
> - }
> - if (cpufreq_device == NULL)
> - goto return_get_max_state;
> -
> - maskPtr = &cpufreq_device->allowed_cpus;
> cpu = cpumask_any(maskPtr);
> table = cpufreq_frequency_get_table(cpu);
> if (!table) {
> *state = 0;
> - ret = 0;
> - goto return_get_max_state;
> + return 0;
> }
>
> for (i = 0; (table[i].frequency != CPUFREQ_TABLE_END); i++) {
> @@ -272,12 +263,10 @@ static int cpufreq_get_max_state(struct thermal_cooling_device *cdev,
>
> if (count > 0) {
> *state = --count;
> - ret = 0;
> + return 0;
> }
>
> -return_get_max_state:
> - mutex_unlock(&cooling_cpufreq_lock);
> - return ret;
> + return -EINVAL;
> }
>
> /**
> @@ -288,20 +277,10 @@ return_get_max_state:
> static int cpufreq_get_cur_state(struct thermal_cooling_device *cdev,
> unsigned long *state)
> {
> - int ret = -EINVAL;
> - struct cpufreq_cooling_device *cpufreq_device;
> + struct cpufreq_cooling_device *cpufreq_device = cdev->devdata;
>
> - mutex_lock(&cooling_cpufreq_lock);
> - list_for_each_entry(cpufreq_device, &cooling_cpufreq_list, node) {
> - if (cpufreq_device && cpufreq_device->cool_dev == cdev) {
> - *state = cpufreq_device->cpufreq_state;
> - ret = 0;
> - break;
> - }
> - }
> - mutex_unlock(&cooling_cpufreq_lock);
> -
> - return ret;
> + *state = cpufreq_device->cpufreq_state;
> + return 0;
> }
>
> /**
> @@ -312,22 +291,9 @@ static int cpufreq_get_cur_state(struct thermal_cooling_device *cdev,
> static int cpufreq_set_cur_state(struct thermal_cooling_device *cdev,
> unsigned long state)
> {
> - int ret = -EINVAL;
> - struct cpufreq_cooling_device *cpufreq_device;
> + struct cpufreq_cooling_device *cpufreq_device = cdev->devdata;
check cdev is not null
>
> - mutex_lock(&cooling_cpufreq_lock);
> - list_for_each_entry(cpufreq_device, &cooling_cpufreq_list, node) {
> - if (cpufreq_device && cpufreq_device->cool_dev == cdev) {
> - ret = 0;
> - break;
> - }
> - }
> - if (!ret)
> - ret = cpufreq_apply_cooling(cpufreq_device, state);
> -
> - mutex_unlock(&cooling_cpufreq_lock);
> -
> - return ret;
> + return cpufreq_apply_cooling(cpufreq_device, state);
> }
>
> /* Bind cpufreq callbacks to thermal cooling device ops */
> @@ -351,7 +317,7 @@ struct thermal_cooling_device *cpufreq_cooling_register(
> {
> struct thermal_cooling_device *cool_dev;
> struct cpufreq_cooling_device *cpufreq_dev = NULL;
> - unsigned int cpufreq_dev_count = 0, min = 0, max = 0;
> + unsigned int min = 0, max = 0;
> char dev_name[THERMAL_NAME_LENGTH];
> int ret = 0, i;
> struct cpufreq_policy policy;
> @@ -360,9 +326,6 @@ struct thermal_cooling_device *cpufreq_cooling_register(
> if (!cpufreq_frequency_get_table(cpumask_any(clip_cpus)))
> return ERR_PTR(-EPROBE_DEFER);
>
> - list_for_each_entry(cpufreq_dev, &cooling_cpufreq_list, node)
> - cpufreq_dev_count++;
> -
> /*Verify that all the clip cpus have same freq_min, freq_max limit*/
> for_each_cpu(i, clip_cpus) {
> /*continue if cpufreq policy not found and not return error*/
> @@ -384,9 +347,6 @@ struct thermal_cooling_device *cpufreq_cooling_register(
>
> cpumask_copy(&cpufreq_dev->allowed_cpus, clip_cpus);
>
> - if (cpufreq_dev_count == 0)
> - mutex_init(&cooling_cpufreq_lock);
> -
> ret = get_idr(&cpufreq_idr, &cpufreq_dev->id);
> if (ret) {
> kfree(cpufreq_dev);
> @@ -405,12 +365,12 @@ struct thermal_cooling_device *cpufreq_cooling_register(
> cpufreq_dev->cool_dev = cool_dev;
> cpufreq_dev->cpufreq_state = 0;
> mutex_lock(&cooling_cpufreq_lock);
> - list_add_tail(&cpufreq_dev->node, &cooling_cpufreq_list);
>
> /* Register the notifier for first cpufreq cooling device */
> if (cpufreq_dev_count == 0)
> cpufreq_register_notifier(&thermal_cpufreq_notifier_block,
> CPUFREQ_POLICY_NOTIFIER);
> + cpufreq_dev_count++;
>
> mutex_unlock(&cooling_cpufreq_lock);
> return cool_dev;
> @@ -423,33 +383,20 @@ EXPORT_SYMBOL(cpufreq_cooling_register);
> */
> void cpufreq_cooling_unregister(struct thermal_cooling_device *cdev)
> {
> - struct cpufreq_cooling_device *cpufreq_dev = NULL;
> - unsigned int cpufreq_dev_count = 0;
> + struct cpufreq_cooling_device *cpufreq_dev = cdev->devdata;
>
> mutex_lock(&cooling_cpufreq_lock);
> - list_for_each_entry(cpufreq_dev, &cooling_cpufreq_list, node) {
> - if (cpufreq_dev && cpufreq_dev->cool_dev == cdev)
> - break;
> - cpufreq_dev_count++;
> - }
> -
> - if (!cpufreq_dev || cpufreq_dev->cool_dev != cdev) {
> - mutex_unlock(&cooling_cpufreq_lock);
> - return;
> - }
> -
> - list_del(&cpufreq_dev->node);
> + cpufreq_dev_count--;
>
> /* Unregister the notifier for the last cpufreq cooling device */
> - if (cpufreq_dev_count == 1) {
> + if (cpufreq_dev_count == 0) {
> cpufreq_unregister_notifier(&thermal_cpufreq_notifier_block,
> CPUFREQ_POLICY_NOTIFIER);
> }
> mutex_unlock(&cooling_cpufreq_lock);
> +
> thermal_cooling_device_unregister(cpufreq_dev->cool_dev);
> release_idr(&cpufreq_idr, cpufreq_dev->id);
> - if (cpufreq_dev_count == 1)
> - mutex_destroy(&cooling_cpufreq_lock);
> kfree(cpufreq_dev);
> }
> EXPORT_SYMBOL(cpufreq_cooling_unregister);
> --
> 1.7.11.3
>
>
> _______________________________________________
> linaro-dev mailing list
> linaro-dev@lists.linaro.org
> http://lists.linaro.org/mailman/listinfo/linaro-dev
^ permalink raw reply
* Re: [PATCH 5/7] ACPI / PM: Provide device PM functions operating on struct acpi_device
From: Aaron Lu @ 2012-10-30 7:28 UTC (permalink / raw)
To: Rafael J. Wysocki
Cc: Linux PM list, ACPI Devel Maling List, Huang Ying, LKML,
Len Brown, Lv Zheng, Adrian Hunter
In-Reply-To: <3903921.4RDYB7KMxW@vostro.rjw.lan>
On Mon, Oct 29, 2012 at 10:11:20AM +0100, Rafael J. Wysocki wrote:
> From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
>
> If the caller of acpi_bus_set_power() already has a pointer to the
> struct acpi_device object corresponding to the device in question, it
> doesn't make sense for it to go through acpi_bus_get_device(), which
> may be costly, because it involves acquiring the global ACPI
> namespace mutex.
>
> For this reason, export the function operating on struct acpi_device
> objects used internally by acpi_bus_set_power(), so that it may be
> called instead of acpi_bus_set_power() in the above case, and change
> its name to acpi_device_set_power().
>
> Additionally, introduce two inline wrappers for checking ACPI PM
> capabilities of devices represented by struct acpi_device objects.
What about adding yet another wrapper to check power off capability of
the device? If device has _PS3 or _PRx, it means the device can be
powered off from ACPI's perspective. This is useful for ZPODD when
deciding if platform has the required ability to support it.
Thanks,
Aaron
>
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
> ---
> drivers/acpi/bus.c | 15 ++++++++++++---
> include/acpi/acpi_bus.h | 11 +++++++++++
> 2 files changed, 23 insertions(+), 3 deletions(-)
>
> Index: linux/drivers/acpi/bus.c
> ===================================================================
> --- linux.orig/drivers/acpi/bus.c
> +++ linux/drivers/acpi/bus.c
> @@ -257,7 +257,15 @@ static int __acpi_bus_get_power(struct a
> }
>
>
> -static int __acpi_bus_set_power(struct acpi_device *device, int state)
> +/**
> + * acpi_device_set_power - Set power state of an ACPI device.
> + * @device: Device to set the power state of.
> + * @state: New power state to set.
> + *
> + * Callers must ensure that the device is power manageable before using this
> + * function.
> + */
> +int acpi_device_set_power(struct acpi_device *device, int state)
> {
> int result = 0;
> acpi_status status = AE_OK;
> @@ -341,6 +349,7 @@ static int __acpi_bus_set_power(struct a
>
> return result;
> }
> +EXPORT_SYMBOL(acpi_device_set_power);
>
>
> int acpi_bus_set_power(acpi_handle handle, int state)
> @@ -359,7 +368,7 @@ int acpi_bus_set_power(acpi_handle handl
> return -ENODEV;
> }
>
> - return __acpi_bus_set_power(device, state);
> + return acpi_device_set_power(device, state);
> }
> EXPORT_SYMBOL(acpi_bus_set_power);
>
> @@ -402,7 +411,7 @@ int acpi_bus_update_power(acpi_handle ha
> if (result)
> return result;
>
> - result = __acpi_bus_set_power(device, state);
> + result = acpi_device_set_power(device, state);
> if (!result && state_p)
> *state_p = state;
>
> Index: linux/include/acpi/acpi_bus.h
> ===================================================================
> --- linux.orig/include/acpi/acpi_bus.h
> +++ linux/include/acpi/acpi_bus.h
> @@ -338,6 +338,7 @@ acpi_status acpi_bus_get_status_handle(a
> unsigned long long *sta);
> int acpi_bus_get_status(struct acpi_device *device);
> int acpi_bus_set_power(acpi_handle handle, int state);
> +int acpi_device_set_power(struct acpi_device *device, int state);
> int acpi_bus_update_power(acpi_handle handle, int *state_p);
> bool acpi_bus_power_manageable(acpi_handle handle);
> bool acpi_bus_can_wakeup(acpi_handle handle);
> @@ -482,6 +483,16 @@ static inline int acpi_pm_device_sleep_w
> }
> #endif
>
> +static inline bool acpi_device_power_manageable(struct acpi_device *adev)
> +{
> + return adev->flags.power_manageable;
> +}
> +
> +static inline bool acpi_device_can_wakeup(struct acpi_device *adev)
> +{
> + return adev->wakeup.flags.valid;
> +}
> +
> #else /* CONFIG_ACPI */
>
> static inline int register_acpi_bus_type(void *bus) { return 0; }
>
^ permalink raw reply
* Re: [PATCH v8 09/11] block: add a new interface to block events
From: Aaron Lu @ 2012-10-30 7:04 UTC (permalink / raw)
To: Tejun Heo, James Bottomley
Cc: Jeff Garzik, Rafael J. Wysocki, Alan Stern, Oliver Neukum,
Jeff Wu, Aaron Lu, Shane Huang, linux-ide, linux-pm, linux-scsi,
linux-acpi
In-Reply-To: <20121029153536.GL5171@htj.dyndns.org>
On 10/29/2012 11:35 PM, Tejun Heo wrote:
> Hello,
>
> On Mon, Oct 29, 2012 at 05:01:36PM +0800, Aaron Lu wrote:
>> ODD_suspend disk_events_workfn
>> ata_port_suspend check_events
>> disk_block_events resume ODD
>> cancel_delayed_work_sync resume parent
>> (waiting for disk_events_workfn) (waiting for suspend callback)
>
> I don't understand why solving it needs to be this elaborate.
:-)
> check_event() can retry. Just add a per-sr mutex which is try-locked
> by sr_block_check_events() and grab it when entering zero power.
Good suggestion. I didn't think about solving it this way.
Many people suggest me that ZPODD is pure SATA/ACPI stuff, and should
not pollute sr driver, so I was trying hard not to touch sr while
preparing these patches, unless there is no other choice(like the
blocking event interface).
So I'm not sure if your suggestion is the way to go.
James, what do you think? Is it OK if I add a mutex into the scsi_cd
structure to do this? Of course I'll define this only under
CONFIG_SATA_ZPODD.
>
>> +/*
>> + * Under some circumstances, there is a race between the calling thread
>> + * of disk_block_events and the events checking function. To avoid such a race,
>> + * this function will check if the delayed work is pending. If not, it means
>> + * the work is either not queued or is already running, false is returned.
>> + * And if yes, try to cancel the delayed work. If succedded, disk_block_events
>> + * will be called and there is no worry that cancel_delayed_work_sync will
>> + * deadlock the events checking function. And if failed, false is returned.
>> + */
>> +bool disk_try_block_events(struct gendisk *disk)
>> +{
>> + struct disk_events *ev = disk->ev;
>> +
>> + if (!ev)
>> + return false;
>> +
>> + if (delayed_work_pending(&ev->dwork)) {
>
> And please don't use delayed_work_pending() like this. It doesn't add
> anything. cancel_delayed_work() already needs to perform all the
> necessary tests.
OK, thanks for the suggestion.
-Aaron
>
>> + if (cancel_delayed_work(&disk->ev->dwork)) {
>> + disk_block_events(disk);
>> + return true;
>> + }
>> + }
>> +
>> + return false;
>> +}
>
> Thanks.
>
^ permalink raw reply
* Re: [PATCH v8 10/11] scsi: sr: support (un)block events
From: Aaron Lu @ 2012-10-30 5:02 UTC (permalink / raw)
To: James Bottomley
Cc: Jeff Garzik, Rafael J. Wysocki, Alan Stern, Tejun Heo,
Oliver Neukum, Jeff Wu, Aaron Lu, Shane Huang, linux-ide,
linux-pm, linux-scsi, linux-acpi
In-Reply-To: <1351534295.3051.9.camel@dabdike>
On 10/30/2012 02:11 AM, James Bottomley wrote:
> On Mon, 2012-10-29 at 17:01 +0800, Aaron Lu wrote:
>> 2 interfaces are added to block/unblock events for the disk sr manages.
>> This is used by SATA ZPODD, when ODD is runtime powered off, the events
>> poll is no longer needed so better be blocked. And once powered on,
>> events poll will be unblocked.
>>
>> These 2 interfaces are needed here because SATA layer does not have
>> access to the gendisk structure sr manages.
>
> I'm afraid this is a nasty layering violation. You can't have a low
> level driver have knowledge of a call back in an upper layer one (in
> this case sr_block_events).
I agree. But since ZPODD is now implemented in ATA layer now, this seems
the only way to do it.
>
> This is all done it looks like because of the problem of getting access
> to the scsi_cd structure from libata, but it's not the right way to
> solve it.
Indeed, and any suggestion on a right way?
>
> I also don't really think you need to do any blocking or unblocking. As
> I said in the previous thread, just fake the events the standard tells
> you to, so userspace can probe to its heart's content and you can keep
> the device powered off.
No problem for the device, the problem is for its ancestor devices in my
current implementation. If the event is not blocked, the ODD will be
runtime resumed every 2 seconds. And along the way, all its ancestor
devices will have to be runtime resumed every 2 seconds, even I did some
trick to avoid power on the ODD itself. This is not a good thing from
power management perspective.
And there are two reasons I want to align runtime PM with ZPODD:
1 Simpler code.
And if I do not align ZPODD with runtime PM, I will need to maintain the
ODD's software status myself, and deal with some race conditions like
when I was to power off the ODD, a new command may arrive; or when the
ODD is powering on, all arriving commands need to be failed for the
moment untill the ODD is fully recovered from EH, etc. And all these
things can be avoided if I rely on runtime PM framework.
2 Integrate with the whole system
With runtime PM, when ODD is suspended, its ancestor devices will have a
chance to enter low power state.
Basically, I think power off is a special suspend state, it should
happen after the device enters runtime suspended state, and this is the
idea I used to implement ZPODD.
Thanks,
Aaron
>
> James
>
>
>> Signed-off-by: Aaron Lu <aaron.lu@intel.com>
>> ---
>> drivers/scsi/Makefile | 1 +
>> drivers/scsi/sr_zpodd.c | 21 +++++++++++++++++++++
>> drivers/scsi/sr_zpodd.h | 9 +++++++++
>> 3 files changed, 31 insertions(+)
>> create mode 100644 drivers/scsi/sr_zpodd.c
>> create mode 100644 drivers/scsi/sr_zpodd.h
>>
>> diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
>> index 888f73a..474efe2 100644
>> --- a/drivers/scsi/Makefile
>> +++ b/drivers/scsi/Makefile
>> @@ -177,6 +177,7 @@ sd_mod-objs := sd.o
>> sd_mod-$(CONFIG_BLK_DEV_INTEGRITY) += sd_dif.o
>>
>> sr_mod-objs := sr.o sr_ioctl.o sr_vendor.o
>> +sr_mod-$(CONFIG_SATA_ZPODD) += sr_zpodd.o
>> ncr53c8xx-flags-$(CONFIG_SCSI_ZALON) \
>> := -DCONFIG_NCR53C8XX_PREFETCH -DSCSI_NCR_BIG_ENDIAN \
>> -DCONFIG_SCSI_NCR53C8XX_NO_WORD_TRANSFERS
>> diff --git a/drivers/scsi/sr_zpodd.c b/drivers/scsi/sr_zpodd.c
>> new file mode 100644
>> index 0000000..0686e8c
>> --- /dev/null
>> +++ b/drivers/scsi/sr_zpodd.c
>> @@ -0,0 +1,21 @@
>> +#include <linux/module.h>
>> +#include <linux/genhd.h>
>> +#include <linux/cdrom.h>
>> +#include "sr.h"
>> +
>> +bool sr_block_events(struct device *dev)
>> +{
>> + struct scsi_cd *cd = dev_get_drvdata(dev);
>> + if (cd)
>> + return disk_try_block_events(cd->disk);
>> + return false;
>> +}
>> +EXPORT_SYMBOL(sr_block_events);
>> +
>> +void sr_unblock_events(struct device *dev)
>> +{
>> + struct scsi_cd *cd = dev_get_drvdata(dev);
>> + if (cd)
>> + disk_unblock_events(cd->disk);
>> +}
>> +EXPORT_SYMBOL(sr_unblock_events);
>> diff --git a/drivers/scsi/sr_zpodd.h b/drivers/scsi/sr_zpodd.h
>> new file mode 100644
>> index 0000000..49c6a55
>> --- /dev/null
>> +++ b/drivers/scsi/sr_zpodd.h
>> @@ -0,0 +1,9 @@
>> +#ifndef __SR_ZPODD_H__
>> +#define __SR_ZPODD_H__
>> +
>> +#include <linux/device.h>
>> +
>> +extern bool sr_block_events(struct device *dev);
>> +extern void sr_unblock_events(struct device *dev);
>> +
>> +#endif
>
>
^ permalink raw reply
* Re: [PATCH v8 10/11] scsi: sr: support (un)block events
From: James Bottomley @ 2012-10-30 4:34 UTC (permalink / raw)
To: Alan Stern
Cc: Aaron Lu, Jeff Garzik, Rafael J. Wysocki, Tejun Heo,
Oliver Neukum, Jeff Wu, Aaron Lu, Shane Huang, linux-ide,
linux-pm, linux-scsi, linux-acpi
In-Reply-To: <Pine.LNX.4.44L0.1210291818100.31151-100000@netrider.rowland.org>
On Mon, 2012-10-29 at 18:22 -0400, Alan Stern wrote:
> On Mon, 29 Oct 2012, James Bottomley wrote:
>
> > On Mon, 2012-10-29 at 17:01 +0800, Aaron Lu wrote:
> > > 2 interfaces are added to block/unblock events for the disk sr manages.
> > > This is used by SATA ZPODD, when ODD is runtime powered off, the events
> > > poll is no longer needed so better be blocked. And once powered on,
> > > events poll will be unblocked.
> > >
> > > These 2 interfaces are needed here because SATA layer does not have
> > > access to the gendisk structure sr manages.
> >
> > I'm afraid this is a nasty layering violation. You can't have a low
> > level driver have knowledge of a call back in an upper layer one (in
> > this case sr_block_events).
> >
> > This is all done it looks like because of the problem of getting access
> > to the scsi_cd structure from libata, but it's not the right way to
> > solve it.
> >
> > I also don't really think you need to do any blocking or unblocking. As
> > I said in the previous thread, just fake the events the standard tells
> > you to, so userspace can probe to its heart's content and you can keep
> > the device powered off.
>
> James, one of us has misunderstood the event-polling mechanism. As far
> as I know, the polling calls that Aaron is concerned with are generated
> by the kernel, not by userspace.
I don't think the origin of the poll changes anything in what I said
above, does it?
James
^ permalink raw reply
* Re: [PATCH v3 2/6] PM / Runtime: introduce pm_runtime_set[get]_memalloc_noio()
From: Ming Lei @ 2012-10-30 3:21 UTC (permalink / raw)
To: Alan Stern
Cc: linux-kernel, Oliver Neukum, Minchan Kim, Greg Kroah-Hartman,
Rafael J. Wysocki, Jens Axboe, David S. Miller, Andrew Morton,
netdev, linux-usb, linux-pm, linux-mm
In-Reply-To: <Pine.LNX.4.44L0.1210291125590.22882-100000@netrider.rowland.org>
On Mon, Oct 29, 2012 at 11:41 PM, Alan Stern <stern@rowland.harvard.edu> wrote:
> On Mon, 29 Oct 2012, Ming Lei wrote:
>
>> The patch introduces the flag of memalloc_noio_resume in
>> 'struct dev_pm_info' to help PM core to teach mm not allocating
>> memory with GFP_KERNEL flag for avoiding probable deadlock
>> problem.
>>
>> As explained in the comment, any GFP_KERNEL allocation inside
>> runtime_resume on any one of device in the path from one block
>> or network device to the root device in the device tree may cause
>> deadlock, the introduced pm_runtime_set_memalloc_noio() sets or
>> clears the flag on device of the path recursively.
>>
>> This patch also introduces pm_runtime_get_memalloc_noio() because
>> the flag may be accessed in block device's error handling path
>> (for example, usb device reset)
>
>> +/*
>> + * pm_runtime_get_memalloc_noio - Get a device's memalloc_noio flag.
>> + * @dev: Device to handle.
>> + *
>> + * Return the device's memalloc_noio flag.
>> + *
>> + * The device power lock is held because bitfield is not SMP-safe.
>> + */
>> +bool pm_runtime_get_memalloc_noio(struct device *dev)
>> +{
>> + bool ret;
>> + spin_lock_irq(&dev->power.lock);
>> + ret = dev->power.memalloc_noio_resume;
>> + spin_unlock_irq(&dev->power.lock);
>> + return ret;
>> +}
>
> You don't need to acquire and release a spinlock just to read the
> value. Reading bitfields _is_ SMP-safe; writing them is not.
Thanks for your review.
As you pointed out before, the flag need to be checked before
resetting usb devices, so the lock should be held to make another
context(CPU) see the updated value suppose one context(CPU)
call pm_runtime_set_memalloc_noio() to change the flag at the
same time.
The lock needn't to be held when the function is called inside
pm_runtime_set_memalloc_noio(), so the bitfield flag should
be checked directly without holding power lock in dev_memalloc_noio().
>
>> +/*
>> + * pm_runtime_set_memalloc_noio - Set a device's memalloc_noio flag.
>> + * @dev: Device to handle.
>> + * @enable: True for setting the flag and False for clearing the flag.
>> + *
>> + * Set the flag for all devices in the path from the device to the
>> + * root device in the device tree if @enable is true, otherwise clear
>> + * the flag for devices in the path which sibliings don't set the flag.
>
> s/which/whose/
> s/ii/i
Will fix it in -v4.
>> + *
>> + * The function should only be called by block device, or network
>> + * device driver for solving the deadlock problem during runtime
>> + * resume:
>> + * if memory allocation with GFP_KERNEL is called inside runtime
>> + * resume callback of any one of its ancestors(or the block device
>> + * itself), the deadlock may be triggered inside the memory
>> + * allocation since it might not complete until the block device
>> + * becomes active and the involed page I/O finishes. The situation
>> + * is pointed out first by Alan Stern. Network device are involved
>> + * in iSCSI kind of situation.
>> + *
>> + * The lock of dev_hotplug_mutex is held in the function for handling
>> + * hotplug race because pm_runtime_set_memalloc_noio() may be called
>> + * in async probe().
>> + */
>> +void pm_runtime_set_memalloc_noio(struct device *dev, bool enable)
>> +{
>> + static DEFINE_MUTEX(dev_hotplug_mutex);
>> +
>> + mutex_lock(&dev_hotplug_mutex);
>> + while (dev) {
>
> Unless you think somebody is likely to call this function with dev
> equal to NULL, this can simply be
>
> for (;;) {
>
>> + /* hold power lock since bitfield is not SMP-safe. */
>> + spin_lock_irq(&dev->power.lock);
>> + dev->power.memalloc_noio_resume = enable;
>> + spin_unlock_irq(&dev->power.lock);
>> +
>> + dev = dev->parent;
>> +
>> + /* only clear the flag for one device if all
>> + * children of the device don't set the flag.
>> + */
>> + if (!dev || (!enable &&
>
> ... thanks to this test.
>
>> + device_for_each_child(dev, NULL,
>> + dev_memalloc_noio)))
>> + break;
>> + }
>> + mutex_unlock(&dev_hotplug_mutex);
>> +}
>
> This might not work if somebody calls pm_runtime_set_memalloc_noio(dev,
> true) and then afterwards registers dev at the same time as someone
> else calls pm_runtime_set_memalloc_noio(dev2, false), if dev and dev2
> have the same parent.
Good catch, pm_runtime_set_memalloc_noio() should be called between
device_add() and device_del() on block/network device.
> Perhaps the kerneldoc should mention that this function must not be
> called until after dev is registered.
Yes, it should be added in -v4.
Thanks,
--
Ming Lei
--
To unsubscribe, send a message with 'unsubscribe linux-mm' in
the body to majordomo@kvack.org. For more info on Linux MM,
see: http://www.linux-mm.org/ .
Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
^ permalink raw reply
* Re: [PATCH v8 02/11] ata: zpodd: Add CONFIG_SATA_ZPODD
From: Aaron Lu @ 2012-10-30 3:19 UTC (permalink / raw)
To: James Bottomley
Cc: Jeff Garzik, Rafael J. Wysocki, Alan Stern, Tejun Heo,
Oliver Neukum, Jeff Wu, Aaron Lu, Shane Huang, linux-ide,
linux-pm, linux-scsi, linux-acpi
In-Reply-To: <1351534282.3051.7.camel@dabdike>
On 10/30/2012 02:11 AM, James Bottomley wrote:
> On Mon, 2012-10-29 at 17:01 +0800, Aaron Lu wrote:
>> Added a new config CONFIG_SATA_ZPODD, which is ued to support
>> SATA based zero power ODD. It depends on ACPI, and selects BLK_DEV_SR
>> as the implementation of ZPODD depends on SCSI sr driver.
>>
>> 2 new files are added, which will be used to host ZPODD related code.
>> They are empty for this commit.
>
> I think you actually need to combine this with patch 3 to have it
> compile ...
I remembered I tested this, and I just tested the compile again, with
the CONFIG_SATA_ZPODD both on and off, and it didn't have any compile
issue, so I'm not sure if this is a problem...
-Aaron
>
> James
>
>
>> Signed-off-by: Aaron Lu <aaron.lu@intel.com>
>> ---
>> drivers/ata/Kconfig | 12 ++++++++++++
>> drivers/ata/Makefile | 1 +
>> 2 files changed, 13 insertions(+)
>> create mode 100644 drivers/ata/sata_zpodd.c
>> create mode 100644 drivers/ata/sata_zpodd.h
>>
>> diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
>> index e08d322..2cdecee 100644
>> --- a/drivers/ata/Kconfig
>> +++ b/drivers/ata/Kconfig
>> @@ -58,6 +58,18 @@ config ATA_ACPI
>> You can disable this at kernel boot time by using the
>> option libata.noacpi=1
>>
>> +config SATA_ZPODD
>> + bool "SATA Zero Power ODD Support"
>> + depends on ACPI
>> + select BLK_DEV_SR
>> + default n
>> + help
>> + This option adds support for SATA ZPODD. It requires both
>> + ODD and the platform support, and if enabled, will automatically
>> + power on/off the ODD when certain condition is satisfied. This
>> + does not impact user's experience of the ODD, only power is saved
>> + when ODD is not in use(i.e. no disc inside).
>> +
>> config SATA_PMP
>> bool "SATA Port Multiplier support"
>> default y
>> diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
>> index 9329daf..a5120ff 100644
>> --- a/drivers/ata/Makefile
>> +++ b/drivers/ata/Makefile
>> @@ -107,3 +107,4 @@ libata-y := libata-core.o libata-scsi.o libata-eh.o libata-transport.o
>> libata-$(CONFIG_ATA_SFF) += libata-sff.o
>> libata-$(CONFIG_SATA_PMP) += libata-pmp.o
>> libata-$(CONFIG_ATA_ACPI) += libata-acpi.o
>> +obj-$(CONFIG_SATA_ZPODD) += sata_zpodd.o
>> diff --git a/drivers/ata/sata_zpodd.c b/drivers/ata/sata_zpodd.c
>> new file mode 100644
>> index 0000000..e69de29
>> diff --git a/drivers/ata/sata_zpodd.h b/drivers/ata/sata_zpodd.h
>> new file mode 100644
>> index 0000000..e69de29
>
>
^ permalink raw reply
* Re: [PATCH v8 05/11] libata-eh: allow defer in ata_exec_internal
From: Aaron Lu @ 2012-10-30 3:09 UTC (permalink / raw)
To: Tejun Heo
Cc: Jeff Garzik, Rafael J. Wysocki, James Bottomley, Alan Stern,
Oliver Neukum, Jeff Wu, Aaron Lu, Shane Huang, linux-ide,
linux-pm, linux-scsi, linux-acpi
In-Reply-To: <20121030030144.GG4066@htj.dyndns.org>
On 10/30/2012 11:01 AM, Tejun Heo wrote:
> Hello,
>
> On Tue, Oct 30, 2012 at 11:00:16AM +0800, Aaron Lu wrote:
>>> Why not do the discovery from EH?
>>
>> Do you mean set a device level EH flag and then schedule EH to do the
>> discovery?
>
> Yeah, something like that or why can't it be done while probing the
> device in the first place?
I'm not aware of a place to store such ODD specific information when
probing the device.
I'm currently storing the loading mech type in structure zpodd, which
gets created after the corresponding SCSI device gets created in
ata_scsi_scan_host, so at the probe time, the zpodd structure does not
exist yet. And the reason I create the zpodd sturcture this late is
that, it is only created when the ODD together the platform is ZPODD
capable, and to find out if this platform is ZPODD capbale, ACPI binding
has to occur first, and ACPI binding happens when SCSI device is added
to the device tree.
Thanks,
Aaron
^ permalink raw reply
* Re: [PATCH v8 05/11] libata-eh: allow defer in ata_exec_internal
From: Tejun Heo @ 2012-10-30 3:01 UTC (permalink / raw)
To: Aaron Lu
Cc: Jeff Garzik, Rafael J. Wysocki, James Bottomley, Alan Stern,
Oliver Neukum, Jeff Wu, Aaron Lu, Shane Huang, linux-ide,
linux-pm, linux-scsi, linux-acpi
In-Reply-To: <508F42C0.8070807@intel.com>
Hello,
On Tue, Oct 30, 2012 at 11:00:16AM +0800, Aaron Lu wrote:
> > Why not do the discovery from EH?
>
> Do you mean set a device level EH flag and then schedule EH to do the
> discovery?
Yeah, something like that or why can't it be done while probing the
device in the first place?
Thanks.
--
tejun
^ permalink raw reply
* Re: [PATCH v8 05/11] libata-eh: allow defer in ata_exec_internal
From: Aaron Lu @ 2012-10-30 3:00 UTC (permalink / raw)
To: Tejun Heo
Cc: Jeff Garzik, Rafael J. Wysocki, James Bottomley, Alan Stern,
Oliver Neukum, Jeff Wu, Aaron Lu, Shane Huang, linux-ide,
linux-pm, linux-scsi, linux-acpi
In-Reply-To: <20121029152051.GK5171@htj.dyndns.org>
On 10/29/2012 11:20 PM, Tejun Heo wrote:
> On Mon, Oct 29, 2012 at 05:01:32PM +0800, Aaron Lu wrote:
>> ata_exec_internal will preempt the ata link's active_tag and ata port's
>> qc_active flags, this is OK for error recovery, but if normal code path
>> wants to use ata_exec_internal, there is a problem: we need to check if
>> it is OK to issue a new command with the help of port_ops->defer.
>>
>> In ZPODD, I'll need to find out the loading mechanism of the ODD by
>> issuing a GET_CONFIGURATION command. And this command may very well
>> race with commands issued from SCSI layer. So instead of preempt the
>> current command, defer the new command if it's not OK to issue it, as
>> it is always wrong to issue a non-NCQ command when there is command(s)
>> in processing.
>
> Why not do the discovery from EH?
Do you mean set a device level EH flag and then schedule EH to do the
discovery?
Thanks,
Aaron
^ permalink raw reply
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox