From: Matthew Percival <matthew@capgo.com>
To: linux-ppp@vger.kernel.org
Subject: Re: Hot to perform a null login?
Date: Wed, 01 Feb 2006 22:09:51 +0000 [thread overview]
Message-ID: <1138831791.9407.6.camel@localhost.localdomain> (raw)
In-Reply-To: <1138770376.8869.17.camel@localhost.localdomain>
G'Day,
> Matthew, could you show us a debug log of the connection attempt? Bill
> asked for that before, and it would be really helpful. Add the option
> debug to the command line you use to start pppd.
Here's the full log from what I sent yesterday:
Feb 1 16:28:16 localhost chat[15870]: timeout set to 10 seconds
Feb 1 16:28:16 localhost chat[15870]: abort on (NO CARRIER)
Feb 1 16:28:16 localhost chat[15870]: abort on (NO DIALTONE)
Feb 1 16:28:16 localhost chat[15870]: abort on (BUSY)
Feb 1 16:28:16 localhost chat[15870]: abort on (ERROR)
Feb 1 16:28:16 localhost chat[15870]: send (AT+WOPEN=1^M)
Feb 1 16:28:16 localhost chat[15870]: expect (OK)
Feb 1 16:28:16 localhost chat[15870]: AT+WOPEN=1^M^M
Feb 1 16:28:16 localhost chat[15870]: OK
Feb 1 16:28:16 localhost chat[15870]: -- got it
Feb 1 16:28:16 localhost chat[15870]: send (\dAT+CPIN?^M)
Feb 1 16:28:18 localhost chat[15870]: timeout set to 5 seconds
Feb 1 16:28:18 localhost chat[15870]: expect (READY)
Feb 1 16:28:18 localhost chat[15870]: ^M
Feb 1 16:28:18 localhost chat[15870]: AT+CPIN?^M^M
Feb 1 16:28:18 localhost chat[15870]: +CPIN: SIM PIN^M
Feb 1 16:28:23 localhost chat[15870]: alarm
Feb 1 16:28:23 localhost chat[15870]: send (\dAT+CPIN=xxxx^M)
Feb 1 16:28:24 localhost chat[15870]: expect (OK)
Feb 1 16:28:24 localhost chat[15870]: AT+CPIN=xxxx^M^M
Feb 1 16:28:24 localhost chat[15870]: OK
Feb 1 16:28:24 localhost chat[15870]: -- got it
Feb 1 16:28:24 localhost chat[15870]: send (\dAT+CPIN?^M)
Feb 1 16:28:26 localhost chat[15870]: timeout set to 10 seconds
Feb 1 16:28:26 localhost chat[15870]: expect (READY)
Feb 1 16:28:26 localhost chat[15870]: ^M
Feb 1 16:28:26 localhost chat[15870]: AT+CPIN?^M^M
Feb 1 16:28:26 localhost chat[15870]: +CPIN: READY
Feb 1 16:28:26 localhost chat[15870]: -- got it
Feb 1 16:28:26 localhost chat[15870]: send (\dAT+CREG=1^M)
Feb 1 16:28:27 localhost chat[15870]: expect (OK)
Feb 1 16:28:27 localhost chat[15870]: ^M
Feb 1 16:28:27 localhost chat[15870]: AT+CREG=1^M^M
Feb 1 16:28:27 localhost chat[15870]: OK
Feb 1 16:28:27 localhost chat[15870]: -- got it
Feb 1 16:28:27 localhost chat[15870]: send (\dAT
+CGDCONT=1,"IP","telstra.internet"^M)
Feb 1 16:28:28 localhost chat[15870]: expect (OK)
Feb 1 16:28:28 localhost chat[15870]: ^M
Feb 1 16:28:28 localhost chat[15870]: AT
+CGDCONT=1,"IP","telstra.internet"^M^M
Feb 1 16:28:28 localhost chat[15870]: OK
Feb 1 16:28:28 localhost chat[15870]: -- got it
Feb 1 16:28:28 localhost chat[15870]: send (\dAT+CGDATA=1^M)
Feb 1 16:28:29 localhost pppd[15869]: Serial connection established.
Feb 1 16:28:29 localhost pppd[15869]: using channel 12
Feb 1 16:28:29 localhost pppd[15869]: Using interface ppp0
Feb 1 16:28:29 localhost pppd[15869]: Connect: ppp0 <--> /dev/ttyS0
Feb 1 16:28:29 localhost pppd[15869]: rcvd [LCP ConfReq id=0x1 <mru
1500> <asyncmap 0x0> <pcomp> <accomp> <auth pap>]
Feb 1 16:28:29 localhost pppd[15869]: sent [LCP ConfReq id=0x1
<asyncmap 0x0> <magic 0xbab2643b> <pcomp> <accomp>]
Feb 1 16:28:29 localhost pppd[15869]: sent [LCP ConfAck id=0x1 <mru
1500> <asyncmap 0x0> <pcomp> <accomp> <auth pap>]
Feb 1 16:28:29 localhost pppd[15869]: rcvd [LCP ConfRej id=0x1 <magic
0xbab2643b>]
Feb 1 16:28:29 localhost pppd[15869]: sent [LCP ConfReq id=0x2
<asyncmap 0x0> <pcomp> <accomp>]
Feb 1 16:28:29 localhost pppd[15869]: rcvd [LCP ConfAck id=0x2
<asyncmap 0x0> <pcomp> <accomp>]
Feb 1 16:28:29 localhost pppd[15869]: sent [PAP AuthReq id=0x1
user="matthew" password=<hidden>]
Feb 1 16:28:32 localhost pppd[15869]: sent [PAP AuthReq id=0x2
user="matthew" password=<hidden>]
Feb 1 16:28:35 localhost pppd[15869]: sent [PAP AuthReq id=0x3
user="matthew" password=<hidden>]
Feb 1 16:28:38 localhost pppd[15869]: No response to PAP
authenticate-requests
Feb 1 16:28:38 localhost pppd[15869]: sent [LCP TermReq id=0x3 "Failed
to authenticate ourselves to peer"]
Feb 1 16:28:38 localhost pppd[15869]: rcvd [PAP AuthNak id=0x1 "Sorry
auth. failed!"]
Feb 1 16:28:38 localhost pppd[15869]: Discarded non-LCP packet when LCP
not open
Feb 1 16:28:39 localhost pppd[15869]: rcvd [LCP TermReq id=0x2]
Feb 1 16:28:39 localhost pppd[15869]: sent [LCP TermAck id=0x2]
Feb 1 16:28:39 localhost pppd[15869]: Hangup (SIGHUP)
Feb 1 16:28:39 localhost pppd[15869]: Modem hangup
Feb 1 16:28:39 localhost pppd[15869]: Connection terminated.
Feb 1 16:28:40 localhost pppd[15869]: Exit.
> I agree with Bill that the "sent [PAP AuthReq" suggests that your end is
> attempting to authenticate the peer. Use the dump option to find out
> where the options are coming from.
pppd options in effect:
debug debug # (from /etc/ppp/peers/gprs-script)
connect-delay 10000 # (from /etc/ppp/peers/gprs-script)
dump # (from command line)
noauth # (from /etc/ppp/peers/gprs-script)
/dev/ttyS0 # (from command line)
115200 # (from /etc/ppp/peers/gprs-script)
lock # (from /etc/ppp/options)
connect /usr/sbin/chat -v -f /etc/ppp/gprs-init #
(from /etc/ppp/peers/gprs-script)
crtscts # (from /etc/ppp/peers/gprs-script)
modem # (from /etc/ppp/peers/gprs-script)
asyncmap 0 # (from /etc/ppp/options)
hide-password # (from /etc/ppp/options)
pap-max-authreq 3 # (from /etc/ppp/peers/gprs-script)
noipdefault # (from /etc/ppp/peers/gprs-script)
defaultroute # (from /etc/ppp/peers/gprs-script)
proxyarp # (from /etc/ppp/options)
usepeerdns # (from /etc/ppp/peers/gprs-script)
noipx # (from /etc/ppp/options)
Thanks,
Matthew
next prev parent reply other threads:[~2006-02-01 22:09 UTC|newest]
Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-02-01 5:06 Hot to perform a null login? Matthew Percival
2006-02-01 5:16 ` Bill Unruh
2006-02-01 5:34 ` Matthew Percival
2006-02-01 6:00 ` Bill Unruh
2006-02-01 6:12 ` James Cameron
2006-02-01 11:40 ` James Carlson
2006-02-01 11:45 ` James Cameron
2006-02-01 22:09 ` Matthew Percival [this message]
2006-02-01 22:26 ` Bill Unruh
2006-02-01 22:29 ` Bill Unruh
2006-02-01 22:40 ` James Carlson
2006-02-01 23:03 ` Matthew Percival
2006-02-01 23:03 ` James Cameron
2006-02-01 23:13 ` James Cameron
2006-02-02 3:33 ` Matthew Percival
2006-02-02 6:38 ` Pieter Loubser
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1138831791.9407.6.camel@localhost.localdomain \
--to=matthew@capgo.com \
--cc=linux-ppp@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox