From mboxrd@z Thu Jan 1 00:00:00 1970 From: David Corbin Date: Tue, 19 Jul 2005 11:13:53 +0000 Subject: auth eap Message-Id: <200507190713.53851.dcorbin@machturtle.com> List-Id: MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit To: linux-ppp@vger.kernel.org I'm trying to get a PPTP tunnel running (on a gentoo client). The tunnel tries to start, but then fails. At the end is my output from attempting to diagnose the failure. >From the "No auth is possible", and the "auth eap", I assume there is a problem with the way something is built on my system, but I can find very little useful information about 'eap'. Can anyone point me in the right direction? Thanks David Connect: ppp0 <--> /dev/pts/4 sent [LCP ConfReq id=0x1 ] rcvd [LCP ConfReq id=0x0 < 17 04 00 24>] No auth is possible sent [LCP ConfRej id=0x0 < 17 04 00 24>] rcvd [LCP ConfAck id=0x1 ] rcvd [LCP TermReq id=0x1 11 0e 0f d3 00 3c cd 74 00 00 03 97] sent [LCP TermAck id=0x1] sent [LCP ConfReq id=0x1 ] sent [LCP ConfReq id=0x1 ] sent [LCP ConfReq id=0x1 ] sent [LCP ConfReq id=0x1 ] sent [LCP ConfReq id=0x1 ] sent [LCP ConfReq id=0x1 ] sent [LCP ConfReq id=0x1 ] sent [LCP ConfReq id=0x1 ] sent [LCP ConfReq id=0x1 ] sent [LCP ConfReq id=0x1 ] Script pptp vpn.enttek.net --nolaunchpppd finished (pid 7810), status = 0x0 Modem hangup Connection terminated.