From: nick <lupusdacicus@netscape.net>
To: linux-ppp@vger.kernel.org
Subject: pppd routing
Date: Sat, 10 Apr 2004 18:33:06 +0000 [thread overview]
Message-ID: <40799D08.40700@netscape.net> (raw)
Hi, I am still trying to connect to the Internet from Linux and I cannot
seem to get the network/routing right.
When I connect from windows, the DNS server, personal IP and routing are
established automatically, but not under linux ? Why ?
>Did u get the ip address? Maybe you should check is there are DNS
>servers ips on your /etc/resolv.conf using the cat command if you want
>cat /etc/resolv.conf. If there is none, you should add the following
>line:
>nameserver1 IP_ADDRESS of the DNS server
>nameserver2 IP_ADDRESS of the second DNS server
>Example:
>nameserver1 200.176.3.10
>nameserver2 200.176.3.11
I did that, but it did not solve anything.
Now, i cannot even get the Linux up and running. I had the bad idea to
run 'setup' and tell Linux to start 'sendmail' at startup. When it gets
to sendmail, it just blocks and Linux won't start. I tried to pass
"linux single", to grub, so I can run setup againg and remove , but it
does not work.
Someone else says:
"One of (at least) three possible things:
- your local name service is misconfigured (what's in
/etc/resolv.conf?)
- your local routing configuration is wrong (what does
'netstat -nr' or 'route -n' report?)"
I looked at "netstat -nr" and "route -n", but since I run windows/linux
on the same laptop (and cannot connect to the net from Linux), I could
not capture the output into a file and send it along with the email.
Again, I use 'usedefaultroute' (or 'defaultroute)in pppd script/conf,
wasn't it suppose to add the routing automatically to the routing table
? In /var/log/messages I have 4 IPs:
-IP_assigned to me
-peers_IP
-DNS_primary
-DNS_secondary
What is the form of route command that I am supposed to run in order to
be able to go outside peers_ip ?
>- the peer's routing is broken (is this your ISP or some other
> machine?)
Actually, I have a sprint cell phone with Vision on it, but from what I
read on the net, this should work, plus, I am positive it does connect,
because I see traffic on my cell (sending+receiving) when I do ping the
machine I am connected to.
>On the assumption that this peer is your ISP and that (therefore) the
>peer isn't just plain broken, you'll need to check the other two
>things. At a guess, one or more of these is wrong:
> - you have a misconfigured default route and/or local Ethernet
interface that is causing packets not to go through the PPP
link when they should.
This is may be the problem.
> - you're missing the "defaultroute" option.
I've got this.
>- you need to get DNS server addresses from your ISP -- either
>use the "usepeerdns" option and link /etc/resolv.conf to
>/etc/ppp/resolv.conf
How do I link /etc/resolv.conf to /etc/ppp/resolv.conf ?
>*OR* create /etc/resolv.conf and add appropriate static addresses >there.
I did this.
>When posting, please include complete debug logs and configuration
>files. Saying that you're able to connect is nice, but it's nicer
>still to be able to look over the actual information.
Well, I would be happy to do that, but I have no floppy disk on the
laptop and I don't know if the CDwrite function would work under linux,
so I can get them under windows and send you this message.
Thank you for your effort,
Nick
next reply other threads:[~2004-04-10 18:33 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-04-10 18:33 nick [this message]
2004-04-10 19:41 ` pppd routing Bill Unruh
2004-04-10 19:52 ` James Carlson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=40799D08.40700@netscape.net \
--to=lupusdacicus@netscape.net \
--cc=linux-ppp@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox