From: Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
To: linux-ppp@vger.kernel.org
Subject: Re: pppd and it's baud rate setting with HSDPA gsm modems
Date: Mon, 27 Oct 2008 08:41:15 +0000 [thread overview]
Message-ID: <49058B16.2000809@teltonika.lt> (raw)
In-Reply-To: <57c6377703cbf5b94675e4331c5d03c6.squirrel@netlandzone.dyndns.org>
Jar wrote:
> Hello
>
> I am using usbserial+option kernel modules with my HSDPA gsm modem. The
> dialer is wvdial.
>
> wvdial.conf
>
> [Dialer Defaults]
> Modem = /dev/ttyUSB0
> Baud = 3600000
> ...
> ...
>
> When I use "Baud = 3600000" in wvdial's config file, the pppd complains
> "pppd[12246]: speed 3600000 not supported". But still I get the 1Mbit/s
> download speed. However if I set "Baud = 460800" the I get also 1Mbit/s
> download speed. But 460800bit/s < 1Mbit/s ??
Option driver doesn't care about baudrate. It can be 9600 and you would
still get 1Mbit/s. This is virtual serial port and it has little common
with real UART.
> Is this kind of "USB serial link" some special case, where pppd doesn't
> use the speed setting at all?
thats driver who is not using speed setting, not pppd.
next prev parent reply other threads:[~2008-10-27 8:41 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-10-27 6:37 pppd and it's baud rate setting with HSDPA gsm modems Jar
2008-10-27 8:41 ` Paulius Zaleckas [this message]
2008-10-27 22:08 ` James Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=49058B16.2000809@teltonika.lt \
--to=paulius.zaleckas@teltonika.lt \
--cc=linux-ppp@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).