Re: pptponfig centos 5.4

[tony.chamberlain@lemko.com]

I did and it installs, but now it keeps closing with a read 0.
We have a Linksys router and I suspect it may not be allowing
pptp or gre or whatever is needed?

-----Original Message-----
From: Jan Just Keijser [mailto:jan.just.keijser@gmail.com]
Sent: Thursday, March 10, 2011 08:51 AM
To: tony.chamberlain@lemko.com
Cc: 'ppp Linux'
Subject: Re: pptponfig centos 5.4

tony.chamberlain@lemko.com wrote:
> Some kind of error:
>
> Install      1 Package(s)         
> Update       1 Package(s)         
> Remove       0 Package(s)         
>
> Total size: 76 k
> Is this ok [y/N]: y
> Downloading Packages:
> warning: rpmts_HdrFromFdno: Header V3 DSA signature: NOKEY, key ID 6b8d79e6
>
>
> GPG key retrieval failed: [Errno 5] OSError: [Errno 2] No such file or directory: '/etc/pki/rpm-gpg/RPM-GPG-KEY-rpmforge-dag'
>
>   
whoops, you need to install the rpmforge repo key as well... or, if you
trust the site, set
  gpgcheck=0
in the repo file and try again.

HTH,

JJK

> -----Original Message-----
> From: Jan Just Keijser [mailto:jan.just.keijser@gmail.com]
> Sent: Thursday, March 10, 2011 08:38 AM
> To: tony.chamberlain@lemko.com
> Cc: 'ppp Linux'
> Subject: Re: pptponfig centos 5.4
>
> tony.chamberlain@lemko.com wrote:
>   
>> Hi
>>
>> I remember one of the James's wrote pptpconfig ;-)
>>
>> You remember before I was having problems with installation because http
>> or yum or rpm would lock up over the web.  I had to do this in sysctl:
>>
>>    net.ipv4.tcp_rmem = 4096 87380 174760
>>    net.ipv4.tcp_wmem = 4096 16384 131072
>>
>> and then a sysctl -p.  Now everything works web wise.  But when I try to
>> install pptpconfig with yum it tells me libxml and libglade.so.0 are
>> dependencies.  libxml is no problem.  I installed a libglade and did a
>> symvolic link from the libglade.so (.7 I believe) to libglade.so.0 but
>> it still tells me libglade.so.0 is required.  I downloaded
>> libglade-0.17-19.i386.rpm and tried to install but it had a whole lot
>> more dependencies.
>>
>> I guess my main questions about centos 5.4 vs. 4.5
>>
>>   1. Is there a different install method?
>>   2. Should I be using
>> rpm -Uvh http://pptpclient.sourceforge.net/yum/stable/fc6/pptp-release-current.noarch.rpm
>>
>> or a different location to get the repository?
>>
>>   
>>     
> I'd use the rpmforge version (1.7.2)
>
> rpmforge.repo:
> [rpmforge]
> name = RHEL $releasever - RPMforge.net - dag
> baseurl = http://apt.sw.be/redhat/el5/en/$basearch/rpmforge
> mirrorlist = http://apt.sw.be/redhat/el5/en/mirrors-rpmforge
> #mirrorlist = file:///etc/yum.repos.d/mirrors-rpmforge
> enabled = 1
> protect = 0
> gpgkey = file:///etc/pki/rpm-gpg/RPM-GPG-KEY-rpmforge-dag
> gpgcheck = 1
>
> then do a
>   yum install pptp
>
> HTH,
>
> JJK
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-ppp" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html
>
>
>
>