Re: [RESEND][PATCH v3 0/6] add LCD support for SAM9X60

[<Claudiu.Beznea@microchip.com>]

On 05.06.2019 09:49, Lee Jones wrote:
> External E-Mail
> 
> 
> On Thu, 25 Apr 2019, Claudiu.Beznea@microchip.com wrote:
> 
>> From: Claudiu Beznea <claudiu.beznea@microchip.com>
>>
>> Hi,
>>
>> These patches adds support for SAM9X60's LCD controller.
>>
>> First patches add option to specify if controller clock source is fixed.
>> Second patch avoid a variable initialization in atmel_hlcdc_crtc_mode_set_nofb().
>> The 3rd add compatibles in pwm-atmel-hlcdc driver.
>> The 4th patch enables sys_clk in probe since SAM9X60 needs this.
>> Specific support was added also in suspend/resume hooks.
>> The 5th patch adds SAM9X60's LCD configuration and enabled it.
>>
>> I took the changes of this series and introduced also a fix
>> (this is the 6th patch in this series) - if you want to send it separately
>> I would gladly do it.
>>
>> I resend this to also include Lee Jones for pwm-atmel-hlcdc changes.
>>
>> Thank you,
>> Claudiu Beznea
>>
>> Changes in v3:
>> - keep compatible string on patch 3/6 on a single line (I keep here a tab
>>   in front of ".compatible" to be aligned with the rest of the code in
>>   atmel_hlcdc_dt_ids[])
>> - patches 4/7 and 3/7 from v2 were applied so remove them from this version
>> - add a fix for atmel_hlcdc (patch 6/6)
>>
>> Changes in v2:
>> - use "|" operator in patch 1/7 to set ATMEL_HLCDC_CLKSEL on cfg
>> - collect Acked-by, Reviewed-by tags
>>
>> Claudiu Beznea (4):
>>   drm: atmel-hlcdc: add config option for clock selection
>>   drm: atmel-hlcdc: avoid initializing cfg with zero
>>   pwm: atmel-hlcdc: add compatible for SAM9X60 HLCDC's PWM
>>   drm/atmel-hclcdc: revert shift by 8
>>
>> Sandeep Sheriker Mallikarjun (2):
>>   drm: atmel-hlcdc: enable sys_clk during initalization.
>>   drm: atmel-hlcdc: add sam9x60 LCD controller
>>
>>  drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_crtc.c  |  18 ++--
>>  drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c    | 120 +++++++++++++++++++++++-
>>  drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.h    |   2 +
>>  drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_plane.c |   2 +-
>>  drivers/pwm/pwm-atmel-hlcdc.c                   |   1 +
>>  5 files changed, 132 insertions(+), 11 deletions(-)
> 
> Why is this being sent to me?

Sorry, you were in the original "to" list due to changes that you asked for
in v2 on mfd part.

Thierry suggested in v1 of this series to take pwm-atmel-hlcdc.c changes
though MFD tree [1]. Then, in v2 you ask me to do update a bit the changes
in pwm-atmel-hlcdc.c [2].

And in this reply I forgot to remove your email as you previously
suggested. My bad!

Thank you,
Claudiu Beznea

[1] https://lore.kernel.org/lkml/20190304110517.GB5121@ulmo/
[2] https://lore.kernel.org/lkml/20190425083132.GD14758@dell/


>