linux-pwm.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Tomasz Figa <tomasz.figa@gmail.com>
To: linux-samsung-soc@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org, linux-pwm@vger.kernel.org,
	"Kukjin Kim" <kgene.kim@samsung.com>,
	"Arnd Bergmann" <arnd@arndb.de>,
	"Olof Johansson" <olof@lixom.net>,
	"Sylwester Nawrocki" <sylvester.nawrocki@gmail.com>,
	"Heiko Stübner" <heiko@sntech.de>,
	"Mark Brown" <broonie@kernel.org>,
	"Thierry Reding" <thierry.reding@gmail.com>,
	"Tomasz Figa" <tomasz.figa@gmail.com>
Subject: [PATCH v4 09/20] ARM: SAMSUNG: Move all platforms to new clocksource driver
Date: Sat, 20 Jul 2013 02:04:22 +0200	[thread overview]
Message-ID: <1374278673-25615-11-git-send-email-tomasz.figa@gmail.com> (raw)
In-Reply-To: <1374278673-25615-1-git-send-email-tomasz.figa@gmail.com>

This patch moves all Samsung platforms using PWM clocksource from legacy
samsung-time to new samsung-pwm-timer driver.

Signed-off-by: Tomasz Figa <tomasz.figa@gmail.com>
---
 arch/arm/Kconfig                | 10 +++++-----
 arch/arm/mach-s3c24xx/Kconfig   |  6 ------
 arch/arm/mach-s3c24xx/common.c  | 16 ++++++++++++++++
 arch/arm/mach-s3c64xx/Kconfig   |  2 --
 arch/arm/mach-s3c64xx/common.c  | 21 +++++++++++++++++----
 arch/arm/mach-s5p64x0/Kconfig   |  2 --
 arch/arm/mach-s5p64x0/common.c  | 17 +++++++++++++++++
 arch/arm/mach-s5pc100/Kconfig   |  1 -
 arch/arm/mach-s5pc100/common.c  | 17 +++++++++++++++++
 arch/arm/mach-s5pv210/Kconfig   |  1 -
 arch/arm/mach-s5pv210/common.c  | 17 +++++++++++++++++
 arch/arm/plat-samsung/s5p-irq.c |  3 ---
 12 files changed, 89 insertions(+), 24 deletions(-)

diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index ba412e0..486ab0a 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -700,7 +700,7 @@ config ARCH_S3C24XX
 	select ARCH_HAS_CPUFREQ
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
+	select CLKSRC_SAMSUNG_PWM
 	select GENERIC_CLOCKEVENTS
 	select GPIO_SAMSUNG
 	select HAVE_CLK
@@ -723,7 +723,7 @@ config ARCH_S3C64XX
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_VIC
 	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
+	select CLKSRC_SAMSUNG_PWM
 	select CPU_V6
 	select GENERIC_CLOCKEVENTS
 	select GPIO_SAMSUNG
@@ -748,7 +748,7 @@ config ARCH_S3C64XX
 config ARCH_S5P64X0
 	bool "Samsung S5P6440 S5P6450"
 	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
+	select CLKSRC_SAMSUNG_PWM
 	select CPU_V6
 	select GENERIC_CLOCKEVENTS
 	select GPIO_SAMSUNG
@@ -767,7 +767,7 @@ config ARCH_S5PC100
 	bool "Samsung S5PC100"
 	select ARCH_REQUIRE_GPIOLIB
 	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
+	select CLKSRC_SAMSUNG_PWM
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select GPIO_SAMSUNG
@@ -787,7 +787,7 @@ config ARCH_S5PV210
 	select ARCH_HAS_HOLES_MEMORYMODEL
 	select ARCH_SPARSEMEM_ENABLE
 	select CLKDEV_LOOKUP
-	select CLKSRC_MMIO
+	select CLKSRC_SAMSUNG_PWM
 	select CPU_V7
 	select GENERIC_CLOCKEVENTS
 	select GPIO_SAMSUNG
diff --git a/arch/arm/mach-s3c24xx/Kconfig b/arch/arm/mach-s3c24xx/Kconfig
index 6d9252e..b8ec0ec 100644
--- a/arch/arm/mach-s3c24xx/Kconfig
+++ b/arch/arm/mach-s3c24xx/Kconfig
@@ -30,7 +30,6 @@ config CPU_S3C2410
 	select S3C2410_CLOCK
 	select ARM_S3C2410_CPUFREQ if ARM_S3C24XX_CPUFREQ
 	select S3C2410_PM if PM
-	select SAMSUNG_HRT
 	select SAMSUNG_WDT_RESET
 	help
 	  Support for S3C2410 and S3C2410A family from the S3C24XX line
@@ -42,7 +41,6 @@ config CPU_S3C2412
 	select CPU_LLSERIAL_S3C2440
 	select S3C2412_DMA if S3C24XX_DMA
 	select S3C2412_PM if PM
-	select SAMSUNG_HRT
 	help
 	  Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line
 
@@ -54,7 +52,6 @@ config CPU_S3C2416
 	select S3C2443_COMMON
 	select S3C2443_DMA if S3C24XX_DMA
 	select SAMSUNG_CLKSRC
-	select SAMSUNG_HRT
 	help
 	  Support for the S3C2416 SoC from the S3C24XX line
 
@@ -65,7 +62,6 @@ config CPU_S3C2440
 	select S3C2410_CLOCK
 	select S3C2410_PM if PM
 	select S3C2440_DMA if S3C24XX_DMA
-	select SAMSUNG_HRT
 	help
 	  Support for S3C2440 Samsung Mobile CPU based systems.
 
@@ -75,7 +71,6 @@ config CPU_S3C2442
 	select CPU_LLSERIAL_S3C2440
 	select S3C2410_CLOCK
 	select S3C2410_PM if PM
-	select SAMSUNG_HRT
 	help
 	  Support for S3C2442 Samsung Mobile CPU based systems.
 
@@ -91,7 +86,6 @@ config CPU_S3C2443
 	select S3C2443_COMMON
 	select S3C2443_DMA if S3C24XX_DMA
 	select SAMSUNG_CLKSRC
-	select SAMSUNG_HRT
 	help
 	  Support for the S3C2443 SoC from the S3C24XX line
 
diff --git a/arch/arm/mach-s3c24xx/common.c b/arch/arm/mach-s3c24xx/common.c
index e5e7d7d..457261c 100644
--- a/arch/arm/mach-s3c24xx/common.c
+++ b/arch/arm/mach-s3c24xx/common.c
@@ -245,6 +245,22 @@ void __init s3c24xx_init_io(struct map_desc *mach_desc, int size)
 	samsung_pwm_set_platdata(&s3c24xx_pwm_variant);
 }
 
+void __init samsung_set_timer_source(unsigned int event, unsigned int source)
+{
+	s3c24xx_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
+	s3c24xx_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
+}
+
+void __init samsung_timer_init(void)
+{
+	unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
+		IRQ_TIMER0, IRQ_TIMER1, IRQ_TIMER2, IRQ_TIMER3, IRQ_TIMER4,
+	};
+
+	samsung_pwm_clocksource_init(S3C_VA_TIMER,
+					timer_irqs, &s3c24xx_pwm_variant);
+}
+
 /* Serial port registrations */
 
 #define S3C2410_PA_UART0      (S3C24XX_PA_UART)
diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig
index 2057853..041da51 100644
--- a/arch/arm/mach-s3c64xx/Kconfig
+++ b/arch/arm/mach-s3c64xx/Kconfig
@@ -17,13 +17,11 @@ config PLAT_S3C64XX
 # Configuration options for the S3C6410 CPU
 
 config CPU_S3C6400
-	select SAMSUNG_HRT
 	bool
 	help
 	  Enable S3C6400 CPU support
 
 config CPU_S3C6410
-	select SAMSUNG_HRT
 	bool
 	help
 	  Enable S3C6410 CPU support
diff --git a/arch/arm/mach-s3c64xx/common.c b/arch/arm/mach-s3c64xx/common.c
index ca05e61..73d79cf 100644
--- a/arch/arm/mach-s3c64xx/common.c
+++ b/arch/arm/mach-s3c64xx/common.c
@@ -43,7 +43,6 @@
 #include <plat/pm.h>
 #include <plat/gpio-cfg.h>
 #include <plat/irq-uart.h>
-#include <plat/irq-vic-timer.h>
 #include <plat/pwm-core.h>
 #include <plat/regs-irqtype.h>
 #include <plat/regs-serial.h>
@@ -158,6 +157,23 @@ static struct samsung_pwm_variant s3c64xx_pwm_variant = {
 	.tclk_mask	= (1 << 7) | (1 << 6) | (1 << 5),
 };
 
+void __init samsung_set_timer_source(unsigned int event, unsigned int source)
+{
+	s3c64xx_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
+	s3c64xx_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
+}
+
+void __init samsung_timer_init(void)
+{
+	unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
+		IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC,
+		IRQ_TIMER3_VIC, IRQ_TIMER4_VIC,
+	};
+
+	samsung_pwm_clocksource_init(S3C_VA_TIMER,
+					timer_irqs, &s3c64xx_pwm_variant);
+}
+
 /* read cpu identification code */
 
 void __init s3c64xx_init_io(struct map_desc *mach_desc, int size)
@@ -206,9 +222,6 @@ void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid)
 	/* initialise the pair of VICs */
 	vic_init(VA_VIC0, IRQ_VIC0_BASE, vic0_valid, IRQ_VIC0_RESUME);
 	vic_init(VA_VIC1, IRQ_VIC1_BASE, vic1_valid, IRQ_VIC1_RESUME);
-
-	/* add the timer sub-irqs */
-	s3c_init_vic_timer_irq(5, IRQ_TIMER0);
 }
 
 #define eint_offset(irq)	((irq) - IRQ_EINT(0))
diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig
index 5a707bd..bb2111b 100644
--- a/arch/arm/mach-s5p64x0/Kconfig
+++ b/arch/arm/mach-s5p64x0/Kconfig
@@ -11,14 +11,12 @@ config CPU_S5P6440
 	bool
 	select S5P_SLEEP if PM
 	select SAMSUNG_DMADEV
-	select SAMSUNG_HRT
 	select SAMSUNG_WAKEMASK if PM
 	help
 	  Enable S5P6440 CPU support
 
 config CPU_S5P6450
 	bool
-	select SAMSUNG_HRT
 	select S5P_SLEEP if PM
 	select SAMSUNG_DMADEV
 	select SAMSUNG_WAKEMASK if PM
diff --git a/arch/arm/mach-s5p64x0/common.c b/arch/arm/mach-s5p64x0/common.c
index 49687f2..42e14f2 100644
--- a/arch/arm/mach-s5p64x0/common.c
+++ b/arch/arm/mach-s5p64x0/common.c
@@ -166,6 +166,23 @@ static struct samsung_pwm_variant s5p64x0_pwm_variant = {
 	.tclk_mask	= 0,
 };
 
+void __init samsung_set_timer_source(unsigned int event, unsigned int source)
+{
+	s5p64x0_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
+	s5p64x0_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
+}
+
+void __init samsung_timer_init(void)
+{
+	unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
+		IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC,
+		IRQ_TIMER3_VIC, IRQ_TIMER4_VIC,
+	};
+
+	samsung_pwm_clocksource_init(S3C_VA_TIMER,
+					timer_irqs, &s5p64x0_pwm_variant);
+}
+
 /*
  * s5p64x0_map_io
  *
diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig
index 2f456a4..15170be 100644
--- a/arch/arm/mach-s5pc100/Kconfig
+++ b/arch/arm/mach-s5pc100/Kconfig
@@ -11,7 +11,6 @@ config CPU_S5PC100
 	bool
 	select S5P_EXT_INT
 	select SAMSUNG_DMADEV
-	select SAMSUNG_HRT
 	help
 	  Enable S5PC100 CPU support
 
diff --git a/arch/arm/mach-s5pc100/common.c b/arch/arm/mach-s5pc100/common.c
index e0600af..c5a8eea 100644
--- a/arch/arm/mach-s5pc100/common.c
+++ b/arch/arm/mach-s5pc100/common.c
@@ -141,6 +141,23 @@ static struct samsung_pwm_variant s5pc100_pwm_variant = {
 	.tclk_mask	= (1 << 5),
 };
 
+void __init samsung_set_timer_source(unsigned int event, unsigned int source)
+{
+	s5pc100_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
+	s5pc100_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
+}
+
+void __init samsung_timer_init(void)
+{
+	unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
+		IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC,
+		IRQ_TIMER3_VIC, IRQ_TIMER4_VIC,
+	};
+
+	samsung_pwm_clocksource_init(S3C_VA_TIMER,
+					timer_irqs, &s5pc100_pwm_variant);
+}
+
 /*
  * s5pc100_map_io
  *
diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig
index 0963283..caaedaf 100644
--- a/arch/arm/mach-s5pv210/Kconfig
+++ b/arch/arm/mach-s5pv210/Kconfig
@@ -15,7 +15,6 @@ config CPU_S5PV210
 	select S5P_PM if PM
 	select S5P_SLEEP if PM
 	select SAMSUNG_DMADEV
-	select SAMSUNG_HRT
 	help
 	  Enable S5PV210 CPU support
 
diff --git a/arch/arm/mach-s5pv210/common.c b/arch/arm/mach-s5pv210/common.c
index 306b29a..26027a2 100644
--- a/arch/arm/mach-s5pv210/common.c
+++ b/arch/arm/mach-s5pv210/common.c
@@ -157,6 +157,23 @@ static struct samsung_pwm_variant s5pv210_pwm_variant = {
 	.tclk_mask	= (1 << 5),
 };
 
+void __init samsung_set_timer_source(unsigned int event, unsigned int source)
+{
+	s5pv210_pwm_variant.output_mask = BIT(SAMSUNG_PWM_NUM) - 1;
+	s5pv210_pwm_variant.output_mask &= ~(BIT(event) | BIT(source));
+}
+
+void __init samsung_timer_init(void)
+{
+	unsigned int timer_irqs[SAMSUNG_PWM_NUM] = {
+		IRQ_TIMER0_VIC, IRQ_TIMER1_VIC, IRQ_TIMER2_VIC,
+		IRQ_TIMER3_VIC, IRQ_TIMER4_VIC,
+	};
+
+	samsung_pwm_clocksource_init(S3C_VA_TIMER,
+					timer_irqs, &s5pv210_pwm_variant);
+}
+
 /*
  * s5pv210_map_io
  *
diff --git a/arch/arm/plat-samsung/s5p-irq.c b/arch/arm/plat-samsung/s5p-irq.c
index ff1a760..6729cb2 100644
--- a/arch/arm/plat-samsung/s5p-irq.c
+++ b/arch/arm/plat-samsung/s5p-irq.c
@@ -19,7 +19,6 @@
 #include <mach/map.h>
 #include <plat/regs-timer.h>
 #include <plat/cpu.h>
-#include <plat/irq-vic-timer.h>
 
 void __init s5p_init_irq(u32 *vic, u32 num_vic)
 {
@@ -30,6 +29,4 @@ void __init s5p_init_irq(u32 *vic, u32 num_vic)
 	for (irq = 0; irq < num_vic; irq++)
 		vic_init(VA_VIC(irq), VIC_BASE(irq), vic[irq], 0);
 #endif
-
-	s3c_init_vic_timer_irq(5, IRQ_TIMER0);
 }
-- 
1.8.3.2

  parent reply	other threads:[~2013-07-20  0:04 UTC|newest]

Thread overview: 62+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-07-20  0:04 [PATCH v4 00/20] Samsung PWM support cleanup Tomasz Figa
2013-07-20  0:04 ` [PATCH v4 01/20] clocksource: samsung_pwm_timer: Do not request PWM mem region Tomasz Figa
2013-07-20  0:04 ` [PATCH v4 02/20] clocksource: samsung_pwm_timer: Correct definition of AUTORELOAD bit Tomasz Figa
2013-07-20  0:04 ` Tomasz Figa
2013-07-22  3:50   ` Daniel Lezcano
2013-07-22  7:43     ` Tomasz Figa
2013-07-22 20:56       ` Daniel Lezcano
2013-07-22 21:11         ` Tomasz Figa
2013-07-22 21:28           ` Daniel Lezcano
2013-07-23 23:32             ` [PATCH v6 " Tomasz Figa
2013-07-29 13:08               ` Daniel Lezcano
2013-07-22 20:54   ` [PATCH v5 " Tomasz Figa
2013-07-20  0:04 ` [PATCH v4 03/20] clocksource: samsung_pwm_timer: Cache clocksource register address Tomasz Figa
2013-07-20  0:04 ` [PATCH v4 04/20] clocksource: samsung_pwm_timer: Do not use clocksource_mmio Tomasz Figa
2013-07-22  3:56   ` Daniel Lezcano
2013-07-22  7:47     ` Tomasz Figa
2013-07-22 20:13       ` Daniel Lezcano
2013-07-22 20:17         ` Tomasz Figa
2013-07-20  0:04 ` [PATCH v4 05/20] clocksource: samsung_pwm_timer: Handle suspend/resume correctly Tomasz Figa
2013-07-22  3:57   ` Daniel Lezcano
2013-07-20  0:04 ` [PATCH v4 06/20] ARM: SAMSUNG: Unify base address definitions of timer block Tomasz Figa
2013-07-20  0:04 ` [PATCH v4 07/20] ARM: SAMSUNG: Add new PWM platform device Tomasz Figa
2013-07-21 19:46   ` Sylwester Nawrocki
2013-07-21 21:51     ` Tomasz Figa
2013-07-21 22:24       ` Tomasz Figa
2013-07-22 20:52   ` [PATCH v5 " Tomasz Figa
2013-07-20  0:04 ` [PATCH v4 08/20] ARM: SAMSUNG: Set PWM platform data Tomasz Figa
2013-07-20  0:04 ` Tomasz Figa [this message]
2013-07-22  3:59   ` [PATCH v4 09/20] ARM: SAMSUNG: Move all platforms to new clocksource driver Daniel Lezcano
2013-07-20  0:04 ` [PATCH v4 10/20] ARM: SAMSUNG: Remove old samsung-time driver Tomasz Figa
2013-07-20  0:04 ` [PATCH v4 11/20] ARM: SAMSUNG: Remove unused PWM timer IRQ chip code Tomasz Figa
2013-07-20  0:04 ` [PATCH v4 12/20] pwm: samsung: Rename to pwm-samsung-legacy Tomasz Figa
2013-07-29 11:44   ` Thierry Reding
2013-07-20  0:04 ` [PATCH v4 13/20] pwm: Add new pwm-samsung driver Tomasz Figa
2013-07-21 19:50   ` Sylwester Nawrocki
2013-07-21 21:58     ` Tomasz Figa
2013-07-22 20:50   ` [PATCH v5 " Tomasz Figa
2013-07-23 23:43     ` [PATCH v6 " Tomasz Figa
2013-08-07 19:35       ` Andrew Bresticker
2013-08-07 19:49         ` Tomasz Figa
2013-08-08 17:13           ` Andrew Bresticker
2013-08-08 21:27             ` Tomasz Figa
2013-07-29 11:44   ` [PATCH v4 " Thierry Reding
2013-07-20  0:04 ` [PATCH v4 14/20] ARM: SAMSUNG: Rework private data handling in dev-backlight Tomasz Figa
2013-07-20  0:04 ` [PATCH v4 15/20] ARM: SAMSUNG: Modify board files to use new PWM platform device Tomasz Figa
2013-07-20  0:04 ` [PATCH v4 16/20] pwm: Remove superseded pwm-samsung-legacy driver Tomasz Figa
2013-07-29 11:45   ` Thierry Reding
2013-07-20  0:04 ` [PATCH v4 17/20] ARM: SAMSUNG: Remove old PWM timer platform devices Tomasz Figa
2013-07-20  0:04 ` [PATCH v4 18/20] ARM: SAMSUNG: Remove pwm-clock infrastructure Tomasz Figa
2013-07-20  0:04 ` [PATCH v4 19/20] ARM: SAMSUNG: Remove remaining uses of plat/regs-timer.h header Tomasz Figa
2013-07-20  0:04 ` [PATCH v4 20/20] ARM: SAMSUNG: Remove " Tomasz Figa
2013-07-21 22:22 ` [PATCH v4 00/20] Samsung PWM support cleanup Sylwester Nawrocki
2013-07-21 22:25   ` Tomasz Figa
2013-07-22  1:55     ` Kukjin Kim
2013-07-22  2:01     ` Kukjin Kim
2013-07-22  7:49       ` Tomasz Figa
2013-07-23 15:30         ` Thierry Reding
2013-07-22 19:34       ` Olof Johansson
2013-07-28 12:22 ` Mark Brown
2013-07-31 19:03 ` Tomasz Figa
2013-08-04 19:28   ` Olof Johansson
2013-08-05 16:51     ` Kukjin Kim

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1374278673-25615-11-git-send-email-tomasz.figa@gmail.com \
    --to=tomasz.figa@gmail.com \
    --cc=arnd@arndb.de \
    --cc=broonie@kernel.org \
    --cc=heiko@sntech.de \
    --cc=kgene.kim@samsung.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-pwm@vger.kernel.org \
    --cc=linux-samsung-soc@vger.kernel.org \
    --cc=olof@lixom.net \
    --cc=sylvester.nawrocki@gmail.com \
    --cc=thierry.reding@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).