From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: "Tim Kryger" Subject: [PATCH 0/5] Add Broadcom Kona PWM Support Date: Mon, 18 Nov 2013 10:54:56 -0800 Message-ID: <1384800901-21711-1-git-send-email-tim.kryger@linaro.org> MIME-Version: 1.0 Return-path: tkryger@broadcom.com Content-Type: text/plain Content-Transfer-Encoding: 7bit List-ID: To: Thierry Reding , Rob Herring , Pawel Moll , Mark Rutland , Stephen Warren , Ian Campbell , Rob Landley , Christian Daudt , Grant Likely Cc: Tim Kryger , Linux PWM List , Device Tree List , Linux Doc List , Linux Kernel Mailing List , Broadcom Kernel Feedback List , Linux ARM Kernel List , Linaro Patches List This series introduces the driver for the Kona PWM controller found in Broadcom mobile SoCs like bcm281xx and updates the device tree and the defconfig to enable use of this hardware on the bcm28155 AP board. It depends on: https://lkml.org/lkml/2013/11/14/521 Tim Kryger (5): Documentation: dt: Add kona-pwm binding pwm: kona: Introduce Kona PWM controller support ARM: dts: Declare the PWM for bcm11351 (bcm281xx) ARM: dts: Enable the PWM for bcm28155 AP board ARM: bcm_defconfig: Enable PWM and Backlight .../devicetree/bindings/pwm/bcm-kona-pwm.txt | 24 +++ arch/arm/boot/dts/bcm11351.dtsi | 8 + arch/arm/boot/dts/bcm28155-ap.dts | 4 + arch/arm/configs/bcm_defconfig | 2 + drivers/pwm/Kconfig | 10 + drivers/pwm/Makefile | 1 + drivers/pwm/pwm-bcm-kona.c | 226 +++++++++++++++++++++ 7 files changed, 275 insertions(+) create mode 100644 Documentation/devicetree/bindings/pwm/bcm-kona-pwm.txt create mode 100644 drivers/pwm/pwm-bcm-kona.c -- 1.8.0.1