[PATCH v2 6/8] arm64: dts: r8a7795: salvator-x: Add panel backlight support

[Ulrich Hecht <ulrich.hecht+renesas@gmail.com>]

From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

The panel backlight is controlled through a GPIO and a PWM channel.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
---
 arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
index bf4674e..8558b27 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
@@ -280,6 +280,16 @@
 			};
 		};
 	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 50000>;
+
+		brightness-levels = <256 128 64 16 8 4 0>;
+		default-brightness-level = <6>;
+
+		enable-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 &du {
@@ -366,6 +376,11 @@
 		function = "du";
 	};
 
+	pwm1_pins: pwm {
+		groups = "pwm1_a";
+		function = "pwm1";
+	};
+
 	sdhi0_pins: sd0 {
 		groups = "sdhi0_data4", "sdhi0_ctrl";
 		function = "sdhi0";
@@ -441,6 +456,13 @@
 	};
 };
 
+&pwm1 {
+	pinctrl-0 = <&pwm1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
 &scif1 {
 	pinctrl-0 = <&scif1_pins>;
 	pinctrl-names = "default";
-- 
2.7.4