From mboxrd@z Thu Jan 1 00:00:00 1970 From: Fabio Estevam Subject: [PATCH v3 RESEND] pwm: imx: Let PWM be active during suspend Date: Tue, 2 Jan 2018 11:01:59 -0200 Message-ID: <1514898119-19632-1-git-send-email-fabio.estevam@nxp.com> Mime-Version: 1.0 Content-Type: text/plain Return-path: Received: from mail-co1nam03on0089.outbound.protection.outlook.com ([104.47.40.89]:15088 "EHLO NAM03-CO1-obe.outbound.protection.outlook.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1751682AbeABNCG (ORCPT ); Tue, 2 Jan 2018 08:02:06 -0500 Sender: linux-pwm-owner@vger.kernel.org List-Id: linux-pwm@vger.kernel.org To: thierry.reding@gmail.com Cc: festevam@gmail.com, linux@arm.linux.org.uk, lw@karo-electronics.de, linux-pwm@vger.kernel.org, Fabio Estevam On a imx6q-cubox-i board, which has an LED driven by PWM, when the system goes into suspend the PWM block is disabled by default, then the PWM pin goes to logic level zero and turn on the LED during suspend, which is not really the behaviour we want to see. By keeping the PWM enabled during suspend via STOPEN bit, the pwm-leds driver sets the brightness to zero in suspend and then the LED is turned off as expected. So always set the STOPEN to fix the PWM behaviour in suspend. Signed-off-by: Fabio Estevam --- Hi Thierry, Resending it in the hope we can still get this in for 4.16. Please not that STOPEN is also unconditionally set in vendor's kernel: http://git.freescale.com/git/cgit.cgi/imx/linux-2.6-imx.git/tree/arch/arm/plat-mxc/pwm.c?h=imx_3.0.35_4.1.0#n106 drivers/pwm/pwm-imx.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/pwm/pwm-imx.c b/drivers/pwm/pwm-imx.c index 2ba5c3a..08cbe81 100644 --- a/drivers/pwm/pwm-imx.c +++ b/drivers/pwm/pwm-imx.c @@ -35,6 +35,7 @@ #define MX3_PWMSAR 0x0C /* PWM Sample Register */ #define MX3_PWMPR 0x10 /* PWM Period Register */ #define MX3_PWMCR_PRESCALER(x) ((((x) - 1) & 0xFFF) << 4) +#define MX3_PWMCR_STOPEN (1 << 25) #define MX3_PWMCR_DOZEEN (1 << 24) #define MX3_PWMCR_WAITEN (1 << 23) #define MX3_PWMCR_DBGEN (1 << 22) @@ -210,7 +211,7 @@ static int imx_pwm_apply_v2(struct pwm_chip *chip, struct pwm_device *pwm, writel(period_cycles, imx->mmio_base + MX3_PWMPR); cr = MX3_PWMCR_PRESCALER(prescale) | - MX3_PWMCR_DOZEEN | MX3_PWMCR_WAITEN | + MX3_PWMCR_STOPEN | MX3_PWMCR_DOZEEN | MX3_PWMCR_WAITEN | MX3_PWMCR_DBGEN | MX3_PWMCR_CLKSRC_IPG_HIGH | MX3_PWMCR_EN; -- 2.7.4