Re: [PATCH 2/3] dt-bindings: pwm: marvell,pxa-pwm: Update to use #pwm-cells = <3>

["Rob Herring (Arm)" <robh@kernel.org>]

On Wed, 05 Feb 2025 18:54:01 +0100, Uwe Kleine-König wrote:
> The PXA PWM binding is the only one that doesn't pass the PWM line index
> as first parameter of the parameter cells. However this can be upgraded
> to the mandatory binding for all new PWM drivers without breaking
> compatibility for old device trees using #pwm-cells = <1>.
> 
> So bump #pwm-cells to 3 with the (undocumented) promise to keep the old
> behaviour for #pwm-cells = <1>.
> 
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
> ---
>  Documentation/devicetree/bindings/pwm/marvell,pxa-pwm.yaml | 3 +--
>  1 file changed, 1 insertion(+), 2 deletions(-)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pwm/marvell,pxa-pwm.example.dtb: pwm@40b00000: #pwm-cells: 3 was expected
	from schema $id: http://devicetree.org/schemas/pwm/marvell,pxa-pwm.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/266765abb8251bd60796a3c4270e3809bfff952e.1738777221.git.u.kleine-koenig@baylibre.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.