From mboxrd@z Thu Jan 1 00:00:00 1970 From: Lothar =?UTF-8?B?V2HDn21hbm4=?= Subject: Re: [PATCHv4 0/4] pwm: imx: support output polarity inversion Date: Tue, 26 Aug 2014 09:24:09 +0200 Message-ID: <20140826092409.7dea5530@ipc1.ka-ro> References: <1408517756-9412-1-git-send-email-LW@KARO-electronics.de> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: Received: from mail.karo-electronics.de ([81.173.242.67]:60364 "EHLO mail.karo-electronics.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755391AbaHZHYY convert rfc822-to-8bit (ORCPT ); Tue, 26 Aug 2014 03:24:24 -0400 In-Reply-To: <1408517756-9412-1-git-send-email-LW@KARO-electronics.de> Sender: linux-pwm-owner@vger.kernel.org List-Id: linux-pwm@vger.kernel.org To: Lothar =?UTF-8?B?V2HDn21hbm4=?= Cc: Thierry Reding , linux-kernel@vger.kernel.org, linux-pwm@vger.kernel.org, Shawn Guo , Sascha Hauer , Arnd Bergmann , Tony Prisk , linux-arm-kernel@lists.infradead.org Hi, Lothar Wa=C3=9Fmann wrote: > This patch series adds support for polarity inversion to the pwm-imx > driver. The patches have been tested on i.MX6, i.MX53 and with the > ti-ehrpwm.c driver. >=20 > Changes wrt. v2: > - make the use of '#pwm-cells =3D <3>' optional, so that the change d= oes > not break existing DT blobs as suggested by Arnd Bergmann and Sasch= a > Hauer. >=20 > Changes wrt. v3: > - implemented the approach suggested by Sascha Hauer=20 > - don't modify struct pwm_ops in the imx_pwm probe function >=20 >=20 Any further comments? Anyone taking care of these patches? Lothar Wa=C3=9Fmann --=20 ___________________________________________________________ Ka-Ro electronics GmbH | Pascalstra=C3=9Fe 22 | D - 52076 Aachen Phone: +49 2408 1402-0 | Fax: +49 2408 1402-10 Gesch=C3=A4ftsf=C3=BChrer: Matthias Kaussen Handelsregistereintrag: Amtsgericht Aachen, HRB 4996 www.karo-electronics.de | info@karo-electronics.de ___________________________________________________________