From mboxrd@z Thu Jan 1 00:00:00 1970 From: Yang Ling Subject: Re: [PATCH 1/2] pwm: loongson1: Add PWM driver for Loongson1 SoC Date: Mon, 24 Apr 2017 21:08:09 +0800 Message-ID: <20170424130809.GA3998@mint-host> References: <20170213152801.GA32019@ubuntu> <20170215130902.GA32795@ubuntu> <0d0c43f5-1016-4cb5-01f8-9ca82860b8ad@imgtec.com> Mime-Version: 1.0 Content-Type: text/plain; charset=us-ascii Return-path: Received: from mail-pf0-f193.google.com ([209.85.192.193]:34250 "EHLO mail-pf0-f193.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1170468AbdDXNIS (ORCPT ); Mon, 24 Apr 2017 09:08:18 -0400 Content-Disposition: inline In-Reply-To: <0d0c43f5-1016-4cb5-01f8-9ca82860b8ad@imgtec.com> Sender: linux-pwm-owner@vger.kernel.org List-Id: linux-pwm@vger.kernel.org To: Marcin Nowakowski Cc: Yang Ling , thierry.reding@gmail.com, keguang.zhang@gmail.com, linux-kernel@vger.kernel.org, linux-pwm@vger.kernel.org, linux-mips@linux-mips.org Hi, Marcin, I am sorry for the late reply. On Thu, Feb 16, 2017 at 10:27:15AM +0100, Marcin Nowakowski wrote: > Hi Yang, > > On 15.02.2017 14:09, Yang Ling wrote: > > >>>+ tmp = (unsigned long long)clk_get_rate(pc->clk) * period_ns; > >>>+ do_div(tmp, 1000000000); > > NSEC_PER_SEC ? > Indeed, NSEC_PER_SEC should be used. > >>>+ period = tmp; > >>>+ > >>>+ tmp = (unsigned long long)period * duty_ns; > >>>+ do_div(tmp, period_ns); > >>>+ duty = period - tmp; > >>>+ > >>>+ if (duty >= period) > >>>+ duty = period - 1; > >>>+ > >>>+ if (duty >> 24 || period >> 24) > >>>+ return -EINVAL; > >>>+ > >>>+ chan->period_ns = period_ns; > >>>+ chan->duty_ns = duty_ns; > >>>+ > >>>+ writel(duty, pc->base + PWM_HRC(pwm->hwpwm)); > >>>+ writel(period, pc->base + PWM_LRC(pwm->hwpwm)); > >>>+ writel(0x00, pc->base + PWM_CNT(pwm->hwpwm)); > >>>+ > >> > >>PWM_HRC and PWM_LRC names suggest that you're using high/low state > >>counters here rather than duty/period - but with no documentation > >>I'm just guessing here. > > > >Indeed, the high/low state counters is used here. > >Change the name to duty_cnt/period_cnt. > > > > > > What I was referring to here is that if you have a high/low value counters > that you enter then these are not the same as duty/period, in simple terms: > high_cnt = duty_cnt > low_cnt = period_cnt - duty_cnt > > so please double check that this is what you want to be doing? As the names > used suggest that this code may be wrong. Or maybe what you're doing is > correct but the register access macros have misleading names? > The macro definition of the register here is misleading. I will fix these problems afterwards. Thanks for your friendly reminder. Yang