From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from mail-eopbgr680056.outbound.protection.outlook.com ([40.107.68.56]:11495 "EHLO NAM04-BN3-obe.outbound.protection.outlook.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1727110AbfLTEAw (ORCPT ); Thu, 19 Dec 2019 23:00:52 -0500 From: Jeff LaBundy Date: Fri, 20 Dec 2019 04:00:45 +0000 Message-ID: <20191220040042.GB2658@labundy.com> References: <1575851866-18919-1-git-send-email-jeff@labundy.com> <1575851866-18919-2-git-send-email-jeff@labundy.com> <20191218235252.GA19438@bogus> In-Reply-To: <20191218235252.GA19438@bogus> Content-Language: en-US Content-Type: text/plain; charset="us-ascii" Content-ID: Content-Transfer-Encoding: quoted-printable MIME-Version: 1.0 Sender: linux-pwm-owner@vger.kernel.org List-ID: Subject: Re: [PATCH v2 1/7] dt-bindings: Add bindings for Azoteq IQS620A/621/622/624/625 To: Rob Herring Cc: "lee.jones@linaro.org" , "dmitry.torokhov@gmail.com" , "thierry.reding@gmail.com" , "jic23@kernel.org" , "devicetree@vger.kernel.org" , "linux-input@vger.kernel.org" , "u.kleine-koenig@pengutronix.de" , "linux-pwm@vger.kernel.org" , "knaack.h@gmx.de" , "lars@metafoo.de" , "pmeerw@pmeerw.net" , "linux-iio@vger.kernel.org" , "mark.rutland@arm.com" Hi Rob, Thank you for your prompt review and your kind words. A couple of questions and comments for you below. On Wed, Dec 18, 2019 at 05:52:52PM -0600, Rob Herring wrote: > On Mon, Dec 09, 2019 at 12:38:32AM +0000, Jeff LaBundy wrote: > > This patch adds device tree bindings for the Azoteq IQS620A, IQS621, > > IQS622, IQS624 and IQS625 multi-function sensors. > >=20 > > A total of three bindings are presented (one MFD and two child nodes); > > they are submitted as a single patch because the child node bindings > > have no meaning in the absence of the MFD binding. > >=20 > > Signed-off-by: Jeff LaBundy > > --- > > Changes in v2: > > - Removed "prox" child node and moved "keys" and "pwm" child nodes to= their > > own bindings > > - Replaced linux,fw-file property with more common firmware-name prop= erty > > - Converted all bindings to YAML >=20 > Good job for first go. >=20 > >=20 > > .../devicetree/bindings/input/iqs62x-keys.yaml | 126 +++++++++++++= ++ > > Documentation/devicetree/bindings/mfd/iqs62x.yaml | 177 +++++++++++++= ++++++++ > > .../devicetree/bindings/pwm/iqs620a-pwm.yaml | 30 ++++ > > 3 files changed, 333 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/input/iqs62x-keys= .yaml > > create mode 100644 Documentation/devicetree/bindings/mfd/iqs62x.yaml > > create mode 100644 Documentation/devicetree/bindings/pwm/iqs620a-pwm.y= aml >=20 > A couple of minor things below. With those fixed: >=20 > Reviewed-by: Rob Herring >=20 > >=20 > > diff --git a/Documentation/devicetree/bindings/input/iqs62x-keys.yaml b= /Documentation/devicetree/bindings/input/iqs62x-keys.yaml > > new file mode 100644 > > index 0000000..e9b54e0 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/input/iqs62x-keys.yaml > > @@ -0,0 +1,126 @@ > > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/input/iqs62x-keys.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Azoteq IQS620A/621/622/624/625 Keys and Switches > > + > > +maintainers: > > + - Jeff LaBundy > > + > > +description: | > > + The Azoteq IQS620A, IQS621, IQS622, IQS624 and IQS625 multi-function= sensors > > + feature a variety of self-capacitive, mutual-inductive and Hall-effe= ct sens- > > + ing capabilities that can facilitate a variety of contactless key an= d switch > > + applications. > > + > > + These functions are collectively represented by a "keys" child node = from the > > + parent MFD driver. See Documentation/devicetree/bindings/mfd/iqs62x.= yaml for > > + further details and examples. Sensor hardware configuration (self-ca= pacitive > > + vs. mutual-inductive, etc.) is selected based on the device's firmwa= re. > > + > > +properties: > > + compatible: > > + enum: > > + - azoteq,iqs620a-keys > > + - azoteq,iqs621-keys > > + - azoteq,iqs622-keys > > + - azoteq,iqs624-keys > > + - azoteq,iqs625-keys > > + > > + linux,keycodes: > > + allOf: > > + - $ref: /schemas/types.yaml#/definitions/uint32-array > > + - minItems: 1 > > + maxItems: 16 > > + description: | > > + Specifies the numeric keycodes associated with each available to= uch or > > + proximity event according to the following table. An 'x' indicat= es the > > + event is supported for a given device. Specify 0 for unused even= ts. > > + > > + ----------------------------------------------------------------= --------- > > + | # | Event | IQS620A | IQS621 | IQS622 | IQS624 |= IQS625 | > > + ----------------------------------------------------------------= --------- > > + | 0 | CH0 Touch | x | x | x | x |= x | > > + | | Antenna 1 Touch* | x | | | |= | > > + ----------------------------------------------------------------= --------- > > + | 1 | CH0 Proximity | x | x | x | x |= x | > > + | | Antenna 1 Prox.* | x | | | |= | > > + ----------------------------------------------------------------= --------- > > + | 2 | CH1 Touch | x | x | x | x |= x | > > + | | Ant. 1 Deep Touch* | x | | | |= | > > + ----------------------------------------------------------------= --------- > > + | 3 | CH1 Proximity | x | x | x | x |= x | > > + ----------------------------------------------------------------= --------- > > + | 4 | CH2 Touch | x | | | |= | > > + ----------------------------------------------------------------= --------- > > + | 5 | CH2 Proximity | x | | | |= | > > + | | Antenna 2 Prox.* | x | | | |= | > > + ----------------------------------------------------------------= --------- > > + | 6 | Metal (+) Touch** | x | x | | |= | > > + | | Ant. 2 Deep Touch* | x | | | |= | > > + ----------------------------------------------------------------= --------- > > + | 7 | Metal (+) Prox.** | x | x | | |= | > > + | | Antenna 2 Touch* | x | | | |= | > > + ----------------------------------------------------------------= --------- > > + | 8 | Metal (-) Touch** | x | x | | |= | > > + ----------------------------------------------------------------= --------- > > + | 9 | Metal (-) Prox.** | x | x | | |= | > > + ----------------------------------------------------------------= --------- > > + | 10 | SAR Active*** | x | | x | |= | > > + ----------------------------------------------------------------= --------- > > + | 11 | SAR Quick Rel.*** | x | | x | |= | > > + ----------------------------------------------------------------= --------- > > + | 12 | SAR Movement*** | x | | x | |= | > > + ----------------------------------------------------------------= --------- > > + | 13 | SAR Filter Halt*** | x | | x | |= | > > + ----------------------------------------------------------------= --------- > > + | 14 | Wheel Up | | | | x |= | > > + ----------------------------------------------------------------= --------- > > + | 15 | Wheel Down | | | | x |= | > > + ----------------------------------------------------------------= --------- > > + * Two-channel SAR. Replaces CH0-2 plus metal touch and proximi= ty events > > + if enabled via firmware. > > + ** "+" and "-" refer to the polarity of a channel's delta (LTA = - counts), > > + where "LTA" is defined as the channel's long-term average. > > + *** One-channel SAR. Replaces CH0-2 touch and proximity events i= f enabled > > + via firmware. > > + > > +required: > > + - compatible > > + - linux,keycodes >=20 > Add:=20 >=20 > additionalProperties: false >=20 When I add this, the dt_binding_check step complains that the hall switch c= hild nodes used in the examples are unrecognized, e.g.: iqs620a@44: keys: 'hall-switch-south' does not match any of the regexes: 'p= inctrl-[0-9]+' When I originally encountered this, I found that the mdio-mux child node in= [0] seems to be a similar example and omits additionalProperties, which is why I orig= inally did that here. Do you have any advice on how to proceed? > > + > > +if: > > + properties: > > + compatible: > > + contains: > > + enum: > > + - azoteq,iqs620a-keys > > + - azoteq,iqs621-keys > > + - azoteq,iqs622-keys > > +then: > > + patternProperties: > > + "^hall-switch-(north|south)$": > > + type: object > > + description: > > + Represents north/south-field Hall-effect sensor touch or proxi= mity > > + events. Note that north/south-field orientation is reversed on= the > > + IQS620AXzCSR device due to its flip-chip package. > > + > > + properties: > > + linux,code: > > + $ref: /schemas/types.yaml#/definitions/uint32 > > + description: Numeric switch code associated with the event. > > + > > + azoteq,use-prox: > > + $ref: /schemas/types.yaml#/definitions/flag > > + description: > > + If present, specifies that Hall-effect sensor reporting sh= ould > > + use the device's wide-range proximity threshold instead of= its > > + close-range touch threshold (default). > > + > > + required: > > + - linux,code > > + Do you think I should specify additionalProperties: false within these chil= d nodes? > > +... > > diff --git a/Documentation/devicetree/bindings/mfd/iqs62x.yaml b/Docume= ntation/devicetree/bindings/mfd/iqs62x.yaml > > new file mode 100644 > > index 0000000..24e6004 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/mfd/iqs62x.yaml > > @@ -0,0 +1,177 @@ > > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/mfd/iqs62x.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Azoteq IQS620A/621/622/624/625 Multi-Function Sensors > > + > > +maintainers: > > + - Jeff LaBundy > > + > > +description: | > > + The Azoteq IQS620A, IQS621, IQS622, IQS624 and IQS625 multi-function= sensors > > + integrate multiple sensing technologies in a single package. > > + > > + Link to data sheets: https://www.azoteq.com/ > > + > > +properties: > > + compatible: > > + enum: > > + - azoteq,iqs620a > > + - azoteq,iqs621 > > + - azoteq,iqs622 > > + - azoteq,iqs624 > > + - azoteq,iqs625 > > + > > + reg: > > + maxItems: 1 > > + > > + interrupts: > > + maxItems: 1 > > + > > + firmware-name: > > + $ref: /schemas/types.yaml#/definitions/string > > + description: > > + Specifies the name of the calibration and configuration file sel= ected by > > + the driver. If this property is omitted, the name is chosen base= d on the > > + device name with ".bin" as the extension (e.g. iqs620a.bin for I= QS620A). > > + > > + keys: > > + $ref: ../input/iqs62x-keys.yaml > > + > > + pwm: > > + $ref: ../pwm/iqs620a-pwm.yaml > > + > > +required: > > + - compatible > > + - reg > > + - interrupts >=20 > Add:=20 >=20 > additionalProperties: false >=20 Sure thing, will do. > > + > > +examples: > > + - | > > + /* > > + * Dual capacitive buttons with additional "air button," unipolar = lid > > + * switch and panel-mounted LED. > > + */ > > + #include > > + #include > > + > > + i2c { > > + #address-cells =3D <1>; > > + #size-cells =3D <0>; > > + > > + iqs620a@44 { > > + compatible =3D "azoteq,iqs620a"; > > + reg =3D <0x44>; > > + interrupt-parent =3D <&gpio>; > > + interrupts =3D <17 IRQ_TYPE_LEVEL_LOW>; > > + > > + keys { > > + compatible =3D "azoteq,iqs620a-keys"; > > + > > + linux,keycodes =3D , > > + , > > + , > > + ; > > + > > + hall-switch-south { > > + linux,code =3D ; > > + azoteq,use-prox; > > + }; > > + }; > > + > > + iqs620a_pwm: pwm { > > + compatible =3D "azoteq,iqs620a-pwm"; > > + #pwm-cells =3D <2>; > > + }; > > + }; > > + }; > > + > > + pwmleds { > > + compatible =3D "pwm-leds"; > > + > > + panel { > > + pwms =3D <&iqs620a_pwm 0 1000000>; > > + max-brightness =3D <255>; > > + }; > > + }; > > + > > + - | > > + /* Single inductive button with bipolar dock/tablet-mode switch. *= / > > + #include > > + #include > > + > > + i2c { > > + #address-cells =3D <1>; > > + #size-cells =3D <0>; > > + > > + iqs620a@44 { > > + compatible =3D "azoteq,iqs620a"; > > + reg =3D <0x44>; > > + interrupt-parent =3D <&gpio>; > > + interrupts =3D <17 IRQ_TYPE_LEVEL_LOW>; > > + > > + firmware-name =3D "iqs620a_coil.bin"; > > + > > + keys { > > + compatible =3D "azoteq,iqs620a-keys"; > > + > > + linux,keycodes =3D <0>, > > + <0>, > > + <0>, > > + <0>, > > + <0>, > > + <0>, > > + ; > > + > > + hall-switch-north { > > + linux,code =3D ; > > + }; > > + > > + hall-switch-south { > > + linux,code =3D ; > > + }; > > + }; > > + }; > > + }; > > + > > + - | > > + /* Dual capacitive buttons with volume knob. */ > > + #include > > + #include > > + > > + i2c { > > + #address-cells =3D <1>; > > + #size-cells =3D <0>; > > + > > + iqs624@44 { > > + compatible =3D "azoteq,iqs624"; > > + reg =3D <0x44>; > > + interrupt-parent =3D <&gpio>; > > + interrupts =3D <17 IRQ_TYPE_LEVEL_LOW>; > > + > > + keys { > > + compatible =3D "azoteq,iqs624-keys"; > > + > > + linux,keycodes =3D , > > + <0>, > > + , > > + <0>, > > + <0>, > > + <0>, > > + <0>, > > + <0>, > > + <0>, > > + <0>, > > + <0>, > > + <0>, > > + <0>, > > + <0>, > > + , > > + ; > > + }; > > + }; > > + }; > > + > > +... > > diff --git a/Documentation/devicetree/bindings/pwm/iqs620a-pwm.yaml b/D= ocumentation/devicetree/bindings/pwm/iqs620a-pwm.yaml > > new file mode 100644 > > index 0000000..6b7aaef > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/pwm/iqs620a-pwm.yaml > > @@ -0,0 +1,30 @@ > > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > > +%YAML 1.2 > > +--- > > +$id: http://devicetree.org/schemas/pwm/iqs620a-pwm.yaml# > > +$schema: http://devicetree.org/meta-schemas/core.yaml# > > + > > +title: Azoteq IQS620A PWM Generator > > + > > +maintainers: > > + - Jeff LaBundy > > + > > +description: | > > + The Azoteq IQS620A multi-function sensor generates a fixed-frequency= PWM > > + output represented by a "pwm" child node from the parent MFD driver.= See > > + Documentation/devicetree/bindings/mfd/iqs62x.yaml for further detail= s as > > + well as an example. > > + > > +properties: > > + compatible: > > + enum: > > + - azoteq,iqs620a-pwm > > + > > + "#pwm-cells": > > + const: 2 > > + > > +required: > > + - compatible > > + - "#pwm-cells" >=20 > Add:=20 >=20 > additionalProperties: false >=20 Sure thing, will do. > > + > > +... > > -- > > 2.7.4 > >=20 [0] Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml Kind regards, Jeff LaBundy