Re: [PATCH v8 3/3] riscv: dts: allwinner: d1: Add pwm node

[Andre Przywara <andre.przywara@arm.com>]

On Wed, 31 Jan 2024 15:59:16 +0300
Aleksandr Shubin <privatesub2@gmail.com> wrote:

Hi,

> D1 and T113s contain a pwm controller with 8 channels.
> This controller is supported by the sun20i-pwm driver.
> 
> Add a device tree node for it.
> 
> Signed-off-by: Aleksandr Shubin <privatesub2@gmail.com>

Compared against the manual:

Reviewed-by: Andre Przywara <andre.przywara@arm.com>

Cheers,
Andre

> ---
>  arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
> index 5a9d7f5a75b4..435a1e66aa6a 100644
> --- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
> +++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
> @@ -145,6 +145,18 @@ uart3_pb_pins: uart3-pb-pins {
>  			};
>  		};
>  
> +		pwm: pwm@2000c00 {
> +			compatible = "allwinner,sun20i-d1-pwm";
> +			reg = <0x02000c00 0x400>;
> +			clocks = <&ccu CLK_BUS_PWM>,
> +				 <&dcxo>,
> +				 <&ccu CLK_APB0>;
> +			clock-names = "bus", "hosc", "apb0";
> +			resets = <&ccu RST_BUS_PWM>;
> +			status = "disabled";
> +			#pwm-cells = <0x3>;
> +		};
> +
>  		ccu: clock-controller@2001000 {
>  			compatible = "allwinner,sun20i-d1-ccu";
>  			reg = <0x2001000 0x1000>;