Re: [PATCH v2 6/8] arm64: dts: r8a7795: salvator-x: Add panel backlight support

[Laurent Pinchart <laurent.pinchart@ideasonboard.com>]

Hi Ulrich,

Thank you for the patch.

On Thursday 27 Apr 2017 16:37:41 Ulrich Hecht wrote:
> From: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
> 
> The panel backlight is controlled through a GPIO and a PWM channel.
> 
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>

> ---
>  arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts | 22 +++++++++++++++++++
>  1 file changed, 22 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
> b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts index bf4674e..8558b27
> 100644
> --- a/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
> +++ b/arch/arm64/boot/dts/renesas/r8a7795-salvator-x.dts
> @@ -280,6 +280,16 @@
>  			};
>  		};
>  	};
> +
> +	backlight: backlight {
> +		compatible = "pwm-backlight";
> +		pwms = <&pwm1 0 50000>;
> +
> +		brightness-levels = <256 128 64 16 8 4 0>;
> +		default-brightness-level = <6>;
> +
> +		enable-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
> +	};
>  };
> 
>  &du {
> @@ -366,6 +376,11 @@
>  		function = "du";
>  	};
> 
> +	pwm1_pins: pwm {
> +		groups = "pwm1_a";
> +		function = "pwm1";
> +	};
> +
>  	sdhi0_pins: sd0 {
>  		groups = "sdhi0_data4", "sdhi0_ctrl";
>  		function = "sdhi0";
> @@ -441,6 +456,13 @@
>  	};
>  };
> 
> +&pwm1 {
> +	pinctrl-0 = <&pwm1_pins>;
> +	pinctrl-names = "default";
> +
> +	status = "okay";
> +};
> +
>  &scif1 {
>  	pinctrl-0 = <&scif1_pins>;
>  	pinctrl-names = "default";

-- 
Regards,

Laurent Pinchart