From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Return-Path: Message-ID: <51EDA3EA.9020502@linaro.org> Date: Mon, 22 Jul 2013 23:28:10 +0200 From: Daniel Lezcano MIME-Version: 1.0 Subject: Re: [PATCH v4 02/20] clocksource: samsung_pwm_timer: Correct definition of AUTORELOAD bit References: <1374278673-25615-1-git-send-email-tomasz.figa@gmail.com> <9612221.r4mx9bHE64@flatron> <51ED9C8C.10803@linaro.org> <1658534.7nG6RFjcTc@flatron> In-Reply-To: <1658534.7nG6RFjcTc@flatron> Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit List-ID: To: Tomasz Figa Cc: linux-samsung-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-pwm@vger.kernel.org, Kukjin Kim , Arnd Bergmann , Olof Johansson , Sylwester Nawrocki , =?UTF-8?B?SGVpa28gU3TDvGJuZXI=?= , Mark Brown , Thierry Reding On 07/22/2013 11:11 PM, Tomasz Figa wrote: > On Monday 22 of July 2013 22:56:44 Daniel Lezcano wrote: >> On 07/22/2013 09:43 AM, Tomasz Figa wrote: >>> On Monday 22 of July 2013 05:50:09 Daniel Lezcano wrote: >>>> On 07/20/2013 02:04 AM, Tomasz Figa wrote: >>>>> PWM channel 4 has its autoreload bit located at different position. >>>>> This patch fixes the driver to account for that. >>>>> >>>>> This fixes a problem with the clocksource hanging after it overflows >>>>> because it is not reloaded any more. >>>>> >>>>> Signed-off-by: Tomasz Figa >>>>> --- >>>>> >>>>> drivers/clocksource/samsung_pwm_timer.c | 3 ++- >>>>> 1 file changed, 2 insertions(+), 1 deletion(-) >>>>> >>>>> diff --git a/drivers/clocksource/samsung_pwm_timer.c >>>>> b/drivers/clocksource/samsung_pwm_timer.c index 3fa5b07..e238fb0 >>>>> 100644 >>>>> --- a/drivers/clocksource/samsung_pwm_timer.c >>>>> +++ b/drivers/clocksource/samsung_pwm_timer.c >>>>> @@ -47,7 +47,8 @@ >>>>> >>>>> #define TCON_START(chan) (1 << (4 * (chan) + 0)) >>>>> #define TCON_MANUALUPDATE(chan) (1 << (4 * (chan) + 1)) >>>>> #define TCON_INVERT(chan) (1 << (4 * (chan) + 2)) >>>>> >>>>> -#define TCON_AUTORELOAD(chan) (1 << (4 * (chan) + 3)) >>>>> +#define TCON_AUTORELOAD(chan) (1 << (4 * (chan) \ >>>>> + + (((chan) < 5) ? 3 : 2))) >>>> >>>> This macro is not readable. Please, fix it up with a comment please. >>> >>> /* >>> >>> * Channel 4 (logically 5 in TCON register) has different position >>> * of autoreload bit. >>> */ >>> >>> #define _TCON_AUTORELOAD(chan) (1 << (4 * (chan) > + 3)) >>> #define _TCON_AUTORELOAD4(chan) (1 << (4 * (chan) > + 2)) >>> #define TCON_AUTORELOAD(chan) ((chan < 5) ? >>> >>> _TCON_AUTORELOAD(chan) : _TCON_AUTORELOAD4(chan)) >>> >>> What do you think? >> >> I don't get the arithmetic here and the code is poor in comment. A nice >> comment would valuable here. > > Each channel occupies 4 bits in TCON register, but there is a gap of 4 > bits after channel 0. In addition for channel 4 the location of autoreload > bit in its set of bits is 2 as opposed to 3 for other channels. Here's the > layout of the register, for reference: > > Timer 4 Auto Reload on/off [22] > Timer 4 Manual Update [21] > Timer 4 Start/Stop [20] > > Timer 3 Auto Reload on/off [19] > Reserved [18] > Timer 3 Manual Update [17] > Timer 3 Start/Stop [16] > > Timer 2 Auto Reload on/off [15] > Reserved [14] > Timer 2 Manual Update [13] > Timer 2 Start/Stop [12] > > Timer 1 Auto Reload on/off [11] > Timer 1 Output Inverter on/off [10] > Timer 1 Manual Update [9] > Timer 1 Start/Stop [8] > > Reserved [7:5] > Dead zone enable/disable [4] > > Timer 0 Auto Reload on/off [3] > Timer 0 Output Inverter on/off [2] > Timer 0 Manual Update [1] > Timer 0 Start/Stop [0] Ok, I understand now. Thanks for the clarification. IMHO, the description you gave above (without layout) will fit well for a comment :) >> May be you can replace 1 << bla by BIT(bla) ? > > Yes, BIT() would be nice here, but IMHO this is material for separate > patch as all the macros in this driver already use 1 << bla. Yes, I agree. Thanks -- Daniel -- Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog