messages from 2019-11-14 10:18:23 to 2019-12-17 04:02:35 UTC [more...]
[PATCH v4 0/2] clocks aren't disable when pwm_mtk_disp suspend
2019-12-17 4:02 UTC
[PATCH v3 0/2] clocks don't disable when pwm_mtk_disp suspend
2019-12-17 3:56 UTC (5+ messages)
` [PATCH v3 1/2] pwm: fix pwm clocks not poweroff when disable pwm
` [PATCH v3 2/2] pwm: keep the trigger register after pwm setting
[PATCH v2 0/2] pwm_mtk_disp suspend resume issue fix
2019-12-17 2:42 UTC (6+ messages)
` [PATCH v2 1/2] pwm: fine tune pwm-mtk-disp clock control flow
` [PATCH v2 2/2] pwm/mtk_disp: move the reg enable trigger in config
[PATCH v4] gpio: pca953x: Add Maxim MAX7313 PWM support
2019-12-16 21:50 UTC (8+ messages)
[PATCH v2 0/7] Add support for Azoteq IQS620A/621/622/624/625
2019-12-16 9:19 UTC (16+ messages)
` [PATCH v2 1/7] dt-bindings: Add bindings "
` [PATCH v2 2/7] mfd: Add support "
` [PATCH v2 3/7] input: keyboard: "
` [PATCH v2 4/7] pwm: Add support for Azoteq IQS620A PWM generator
` [PATCH v2 5/7] iio: temperature: Add support for Azoteq IQS620AT temperature sensor
` [PATCH v2 6/7] iio: light: Add support for Azoteq IQS621/622 ambient light sensors
` [PATCH v2 7/7] iio: position: Add support for Azoteq IQS624/625 angle sensors
[PATCH] dt-bindings: pwm: fix nodename pattern
2019-12-13 11:09 UTC (5+ messages)
[PATCH 1/2] gpio: mvebu: use platform_irq_count
2019-12-12 16:08 UTC (12+ messages)
` [PATCH 2/2] gpio: bcm-kona: "
[PATCH v3 1/2] gpio: mvebu: use platform_irq_count
2019-12-11 10:03 UTC (7+ messages)
` [PATCH v3 2/2] gpio: bcm-kona: "
[PATCH] dt-bindings: pwm: allwinner: Fix missing header in H6 example
2019-12-11 9:20 UTC (4+ messages)
[PATCH v7 0/8] Add support for H6 PWM
2019-12-10 17:20 UTC (17+ messages)
` [PATCH v7 1/8] dt-bindings: pwm: allwinner: Add H6 PWM description
` [PATCH v7 2/8] pwm: sun4i: Add an optional probe for reset line
` [PATCH v7 3/8] pwm: sun4i: Prefer "mod" clock to unnamed
` [PATCH v7 4/8] pwm: sun4i: Add an optional probe for bus clock
` [PATCH v7 5/8] pwm: sun4i: Add support to output source clock directly
` [PATCH v7 6/8] pwm: sun4i: Add support for H6 PWM
` [PATCH v7 7/8] arm64: dts: allwinner: h6: Add PWM node
` [PATCH v7 8/8] [DO NOT MERGE] arm64: allwinner: h6: enable Beelink GS1 PWM
[PATCH v3 1/3] pwm: jz4740: Use clocks from TCU driver
2019-12-10 15:27 UTC (3+ messages)
` [PATCH v3 2/3] pwm: jz4740: Obtain regmap from parent node
` [PATCH v3 3/3] pwm: jz4740: Allow selection of PWM channels 0 and 1
[PATCH] pwm: sun4i: redundant assignment to variable pval
2019-12-10 10:24 UTC (5+ messages)
` [PATCH] pwm: sun4i: Narrow scope of local variable
` [PATCH v2] "
[PATCH] pwm: bcm2835: Allow building for ARCH_BRCMSTB
2019-12-10 6:52 UTC (2+ messages)
[PATCH 1/2] docs: pwm split out pwm-sysfs description from the generic pwm documentation
2019-12-09 21:32 UTC (2+ messages)
` [PATCH 2/2] docs: pwm: rework documentation for the framework
[GIT PULL] pwm: Changes for v5.5-rc1
2019-12-05 20:45 UTC (8+ messages)
` [GIT PULL v2] "
[PATCH v2 1/2] gpio: mvebu: use platform_irq_count
2019-12-05 9:22 UTC (9+ messages)
` [PATCH v2 2/2] gpio: bcm-kona: "
[PATCH 1/4] pwm: Read initial hardware state at request time
2019-12-05 7:12 UTC (4+ messages)
` [PATCH 2/4] pwm: cros-ec: Cache duty cycle value
[RESEND PATCH v3 0/1] Convert period and duty cycle to u64
2019-12-04 23:28 UTC (2+ messages)
` [RESEND PATCH v3 1/1] pwm: "
[PATCH v3] gpio: pca953x: Add Maxim MAX7313 PWM support
2019-11-26 13:12 UTC (8+ messages)
[PATCH v9 0/6] Add support for H6 PWM
2019-11-24 19:18 UTC (9+ messages)
` [PATCH v9 1/6] pwm: sun4i: Add an optional probe for reset line
` [PATCH v9 2/6] pwm: sun4i: Prefer "mod" clock to unnamed
` [PATCH v9 3/6] pwm: sun4i: Add an optional probe for bus clock
` [PATCH v9 4/6] pwm: sun4i: Always calculate params when applying new parameters
` [PATCH v9 5/6] pwm: sun4i: Add support to output source clock directly
` [PATCH v9 6/6] pwm: sun4i: Add support for H6 PWM
[PATCH v8 0/6] Add support for H6 PWM
2019-11-23 20:00 UTC (14+ messages)
` [PATCH v8 1/6] pwm: sun4i: Add an optional probe for reset line
` [PATCH v8 2/6] pwm: sun4i: Prefer "mod" clock to unnamed
` [PATCH v8 3/6] pwm: sun4i: Add an optional probe for bus clock
` [PATCH v8 4/6] pwm: sun4i: Always calculate params when applying new parameters
` [PATCH v8 5/6] pwm: sun4i: Add support to output source clock directly
` [PATCH v8 6/6] pwm: sun4i: Add support for H6 PWM
[PATCH AUTOSEL 4.9 60/91] pwm: clps711x: Fix period calculation
2019-11-22 6:00 UTC
[PATCH AUTOSEL 4.14 080/127] pwm: clps711x: Fix period calculation
2019-11-22 5:54 UTC
[PATCH AUTOSEL 4.19 137/219] pwm: clps711x: Fix period calculation
2019-11-22 5:47 UTC
[PATCH] pwm: stm32: remove automatic output enable
2019-11-21 10:58 UTC
[PATCH v2] dt-bindings: mfd: Convert stm32 low power timers bindings to json-schema
2019-11-20 18:09 UTC (2+ messages)
[PATCH v4 1/2] dt-bindings: pwm: Convert PWM bindings to json-schema
2019-11-19 20:18 UTC (2+ messages)
[PATCH v2 0/3] pwm: jz4740: Update to use TCU clocks/regmap
2019-11-18 13:42 UTC (10+ messages)
` [PATCH v2 1/3] pwm: jz4740: Use clocks from TCU driver
` [PATCH v2 2/3] pwm: jz4740: Obtain regmap from parent node
` [PATCH v2 3/3] pwm: jz4740: Allow selection of PWM channels 0 and 1
[PATCH v6 0/8] Add support for H6 PWM
2019-11-18 13:23 UTC (13+ messages)
` [PATCH v6 1/8] dt-bindings: pwm: allwinner: Add H6 PWM description
` [PATCH v6 2/8] pwm: sun4i: Add an optional probe for reset line
` [PATCH v6 3/8] pwm: sun4i: Prefer "mod" clock to unnamed
` [PATCH v6 4/8] pwm: sun4i: Add an optional probe for bus clock
` [PATCH v6 5/8] pwm: sun4i: Add support to output source clock directly
` [PATCH v6 6/8] pwm: sun4i: Add support for H6 PWM
` [PATCH v6 7/8] arm64: dts: allwinner: h6: Add PWM node
` [PATCH v6 8/8] [DO NOT MERGE] arm64: allwinner: h6: enable Beelink GS1 PWM
[PATCH v5 0/8] Add support for H6 PWM
2019-11-18 9:51 UTC (11+ messages)
` [PATCH v5 1/8] dt-bindings: pwm: allwinner: Add H6 PWM description
` [PATCH v5 2/8] pwm: sun4i: Add an optional probe for reset line
` [PATCH v5 3/8] pwm: sun4i: Prefer "mod" clock to unnamed
` [PATCH v5 4/8] pwm: sun4i: Add an optional probe for bus clock
` [PATCH v5 5/8] pwm: sun4i: Add support to output source clock directly
` [PATCH v5 6/8] pwm: sun4i: Add support for H6 PWM
` [PATCH v5 7/8] arm64: dts: allwinner: h6: Add PWM node
` [PATCH v5 8/8] [DO NOT MERGE] arm64: allwinner: h6: enable Beelink GS1 PWM
[PATCH AUTOSEL 4.14 024/150] pwm: lpss: Only set update bit if we are actually changing the settings
2019-11-16 15:45 UTC
[PATCH AUTOSEL 4.19 042/237] pwm: lpss: Only set update bit if we are actually changing the settings
2019-11-16 15:37 UTC
[PATCH v3 0/1] Convert period and duty cycle to u64
2019-11-15 21:02 UTC (2+ messages)
` [PATCH v3 1/1] pwm: "
[PATCH v2 0/1] Convert period and duty cycle to u64
2019-11-15 12:31 UTC (3+ messages)
` [PATCH v2 1/1] pwm: "
[PATCH] dt-bindings: mfd: Convert stm32 low power timers bindings to json-schema
2019-11-15 12:27 UTC
[PATCH 0/1] Convert period and duty cycle to u64
2019-11-15 10:32 UTC (7+ messages)
` [PATCH 1/1] pwm: "
[PATCH v4 0/7] Add support for H6 PWM
2019-11-15 7:35 UTC (9+ messages)
` [PATCH v4 3/7] pwm: sun4i: Add an optional probe for bus clock
` [PATCH v4 4/7] pwm: sun4i: Add support to output source clock directly
[PATCH v3] dt-bindings: mfd: Convert stm32 timers bindings to json-schema
2019-11-14 17:31 UTC (2+ messages)
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox