messages from 2019-11-24 17:29:07 to 2020-01-10 07:18:34 UTC [more...]
[PATCH] pwm: sun4i: Fix inconsistent IS_ERR and PTR_ERR
2020-01-10 7:18 UTC (5+ messages)
[PATCH -next] pwm: sun4i: Fix wrong pointer passed to PTR_ERR()
2020-01-10 7:16 UTC (2+ messages)
[PATCH] [RFC] pwm: sun4i: Move pwm_calculate out of spin_lock
2020-01-10 7:13 UTC (2+ messages)
[PATCH v2 0/7] Add support for Azoteq IQS620A/621/622/624/625
2020-01-10 4:29 UTC (28+ messages)
` [PATCH v2 1/7] dt-bindings: Add bindings "
` [PATCH v2 2/7] mfd: Add support "
` [PATCH v2 3/7] input: keyboard: "
` [PATCH v2 4/7] pwm: Add support for Azoteq IQS620A PWM generator
` [PATCH v2 5/7] iio: temperature: Add support for Azoteq IQS620AT temperature sensor
` [PATCH v2 6/7] iio: light: Add support for Azoteq IQS621/622 ambient light sensors
` [PATCH v2 7/7] iio: position: Add support for Azoteq IQS624/625 angle sensors
[PATCH 1/2] pwm: Fix minor Kconfig whitespace issues
2020-01-08 13:00 UTC (14+ messages)
` [PATCH 2/2] pwm: Enable compile testing for some of drivers
[PATCH v2 0/6] Updates for the atmel PWM driver
2020-01-08 13:00 UTC (2+ messages)
[PATCH v9 0/6] Add support for H6 PWM
2020-01-08 12:42 UTC (8+ messages)
` [PATCH v9 3/6] pwm: sun4i: Add an optional probe for bus clock
` [PATCH v9 5/6] pwm: sun4i: Add support to output source clock directly
` [PATCH v9 6/6] pwm: sun4i: Add support for H6 PWM
[PATCH v2 0/6] pwm: mxs: add support for setting polarity via DT
2020-01-08 12:41 UTC (2+ messages)
[PATCH v5] gpio: pca953x: Add Maxim MAX7313 PWM support
2020-01-07 13:31 UTC
[PATCH v4] gpio: pca953x: Add Maxim MAX7313 PWM support
2020-01-07 12:31 UTC (11+ messages)
[PATCH 01/32] pwm: sun4i: convert to devm_platform_ioremap_resource
2020-01-07 10:54 UTC (36+ messages)
` [PATCH 02/32] pwm: fsl-ftm: "
` [PATCH 03/32] pwm: rcar: "
` [PATCH 04/32] pwm: renesas-tpu: "
` [PATCH 05/32] pwm: ep93xx: "
` [PATCH 06/32] pwm: tegra: "
` [PATCH 07/32] pwm: mediatek: "
` [PATCH 08/32] pwm: sti: "
` [PATCH 09/32] pwm: pxa: "
` [PATCH 10/32] pwm: zx: "
` [PATCH 11/32] pwm: spear: "
` [PATCH 12/32] pwm: bcm-kona: "
` [PATCH 13/32] pwm: lpc32xx: "
` [PATCH 14/32] pwm: meson: "
` [PATCH 15/32] pwm: rockchip: "
` [PATCH 16/32] pwm: bcm-iproc: "
` [PATCH 17/32] pwm: samsung: "
` [PATCH 18/32] pwm: tiehrpwm: "
` [PATCH 19/32] pwm: puv3: "
` [PATCH 20/32] pwm: imx: "
` [PATCH 21/32] pwm: tiecap: "
` [PATCH 22/32] pwm: bcm2835: "
` [PATCH 23/32] pwm: berlin: "
` [PATCH 24/32] pwm: vt8500: "
` [PATCH 25/32] pwm: brcmstb: "
` [PATCH 26/32] pwm: mtk-disp: "
` [PATCH 27/32] pwm: clps711x: "
` [PATCH 28/32] pwm: img: "
` [PATCH 29/32] pwm: lpc18xx-sct: "
` [PATCH 30/32] pwm: hibvt: do some cleanup
` [PATCH 31/32] pwm: sifive: convert to devm_platform_ioremap_resource
` [PATCH 32/32] pwm: atmel: "
[PATCH v3 0/7] Add support for Azoteq IQS620A/621/622/624/625
2020-01-06 0:48 UTC (8+ messages)
` [PATCH v3 1/7] dt-bindings: Add bindings "
` [PATCH v3 2/7] mfd: Add support "
` [PATCH v3 3/7] input: keyboard: "
` [PATCH v3 4/7] pwm: Add support for Azoteq IQS620A PWM generator
` [PATCH v3 5/7] iio: temperature: Add support for Azoteq IQS620AT temperature sensor
` [PATCH v3 6/7] iio: light: Add support for Azoteq IQS621/622 ambient light sensors
` [PATCH v3 7/7] iio: position: Add support for Azoteq IQS624/625 angle sensors
[PATCH] pwm: bcm2835: Allow building for ARCH_BRCMSTB
2019-12-30 19:33 UTC (3+ messages)
[PATCH] pwm: imx27: Eliminate error message for defer probe
2019-12-30 12:54 UTC (2+ messages)
[RESEND PATCH V8 3/3] Input: new da7280 haptic driver
2019-12-20 8:26 UTC
[PATCH v4 0/2] clocks aren't disable when pwm_mtk_disp suspend
2019-12-17 4:02 UTC (3+ messages)
` [PATCH v4 1/2] pwm: mtk_disp: fix pwm clocks not poweroff when disable pwm
` [PATCH v4 2/2] pwm: mtk_disp: keep the trigger register after pwm setting
[PATCH v3 0/2] clocks don't disable when pwm_mtk_disp suspend
2019-12-17 3:56 UTC (5+ messages)
` [PATCH v3 1/2] pwm: fix pwm clocks not poweroff when disable pwm
` [PATCH v3 2/2] pwm: keep the trigger register after pwm setting
[PATCH v2 0/2] pwm_mtk_disp suspend resume issue fix
2019-12-17 2:42 UTC (6+ messages)
` [PATCH v2 1/2] pwm: fine tune pwm-mtk-disp clock control flow
` [PATCH v2 2/2] pwm/mtk_disp: move the reg enable trigger in config
[PATCH] dt-bindings: pwm: fix nodename pattern
2019-12-13 11:09 UTC (5+ messages)
[PATCH 1/2] gpio: mvebu: use platform_irq_count
2019-12-12 16:08 UTC (12+ messages)
` [PATCH 2/2] gpio: bcm-kona: "
[PATCH v3 1/2] gpio: mvebu: use platform_irq_count
2019-12-11 10:03 UTC (7+ messages)
` [PATCH v3 2/2] gpio: bcm-kona: "
[PATCH] dt-bindings: pwm: allwinner: Fix missing header in H6 example
2019-12-11 9:20 UTC (4+ messages)
[PATCH v7 0/8] Add support for H6 PWM
2019-12-10 17:20 UTC (4+ messages)
[PATCH v3 1/3] pwm: jz4740: Use clocks from TCU driver
2019-12-10 15:27 UTC (3+ messages)
` [PATCH v3 2/3] pwm: jz4740: Obtain regmap from parent node
` [PATCH v3 3/3] pwm: jz4740: Allow selection of PWM channels 0 and 1
[PATCH] pwm: sun4i: redundant assignment to variable pval
2019-12-10 10:24 UTC (5+ messages)
` [PATCH] pwm: sun4i: Narrow scope of local variable
` [PATCH v2] "
[PATCH 1/2] docs: pwm split out pwm-sysfs description from the generic pwm documentation
2019-12-09 21:32 UTC (2+ messages)
` [PATCH 2/2] docs: pwm: rework documentation for the framework
[GIT PULL] pwm: Changes for v5.5-rc1
2019-12-05 20:45 UTC (8+ messages)
` [GIT PULL v2] "
[PATCH v2 1/2] gpio: mvebu: use platform_irq_count
2019-12-05 9:22 UTC (9+ messages)
` [PATCH v2 2/2] gpio: bcm-kona: "
[PATCH 1/4] pwm: Read initial hardware state at request time
2019-12-05 7:12 UTC (4+ messages)
` [PATCH 2/4] pwm: cros-ec: Cache duty cycle value
[RESEND PATCH v3 0/1] Convert period and duty cycle to u64
2019-12-04 23:28 UTC (2+ messages)
` [RESEND PATCH v3 1/1] pwm: "
[PATCH v3] gpio: pca953x: Add Maxim MAX7313 PWM support
2019-11-26 13:12 UTC (7+ messages)
page: next (older) | prev (newer) | latest
- recent:[subjects (threaded)|topics (new)|topics (active)]
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox