From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Tim Harvey" Subject: Ateonix NASAS 2040 NAS device - recovering RAID5 array Date: Thu, 27 May 2004 15:15:55 -0700 Sender: linux-raid-owner@vger.kernel.org Message-ID: <003201c44438$2fbd50d0$7001a8c0@darwin> Mime-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Return-path: To: linux-raid@vger.kernel.org List-Id: linux-raid.ids Greetings, I have an Ateonix NASAS 2040 NAS device that has gone bad. Specifically the flash based OS (which is provided by a PCI 'flash disk' module made by Ateonix) is not booting because of a power glitch while that occurred obviously at a bad moment in time (while it was recovering from another glitch I believe)). Does anyone else out there have much knowledge of these devices? I've had mine running 24/7 for about 9 months now without incident. I've learned since that the company has gone out of business (unfortunate, it was a great entry-level product). I'm looking for anyone that may have firmware update files for it and any knowledge on how it operates. Specifically, I'm interested in finding out how I can reset the unit to factory defaults while 'not' loosing the data on the existing array. Also, I'm curious if anyone has found a way to get into the Linux OS (I've hooked up a keyboard/monitor to the mboard, but I can't get any prompt, nor have I been able to find any ports open for telnet/ssh). Its not something they supported, but I'm thinking there may be an unsupported/undocumented way. Any info on this product would be greatly appreciated! Thanks, Tim