From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Stephan Hafiz" Subject: AW: md_raid5 recovering failed need help Date: Mon, 29 Dec 2014 22:18:13 +0100 Message-ID: <004001d023ac$f4e7bf80$deb73e80$@hafis.de> References: <549ECF26.2040104@turmel.org> Mime-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: QUOTED-PRINTABLE Return-path: In-Reply-To: <549ECF26.2040104@turmel.org> Content-Language: de Sender: linux-raid-owner@vger.kernel.org To: 'Phil Turmel' , 'linux-raid' List-Id: linux-raid.ids Good day Phil, David is ok, Stephan too. David is my second firstname. I always think = stephan is for english native speaker hard to say (?) !SMART -x at the end !Distro PRETTY_NAME=3D"Ubuntu 14.04.1 LTS" Ubuntu 3.13.0-43.72-generic 3.13.11.11 Linux pluto 3.13.0-43-generic #72-Ubuntu SMP Mon Dec 8 19:35:06 UTC 201= 4 x86_64 x86_64 x86_64 GNU/Linux !logs Unfortunately, no syslogmessages, the raid has failed in july.... since= then i try to find the cause ... I have only my puttylogs. ! sysrescuecd.org CD :-) !!! yes, it works now! But on disk was/is removed. Backup to an oth= er NAS is in progress. ( The md was /dev/md0 ) I can't understand why this distro has no problems to assemble this rai= d ??? Thx very mutch for your time to help me.... in german we say "i stand o= n the hose" :-) Happy new Year for you an your familie, David (Stephan) -----Urspr=C3=BCngliche Nachricht----- Von: Phil Turmel [mailto:philip@turmel.org]=20 Gesendet: Samstag, 27. Dezember 2014 16:24 An: Stephan Hafiz; linux-raid Betreff: Re: md_raid5 recovering failed need help Good morning David, { or Stephan ? } On 12/25/2014 09:24 AM, Stephan Hafiz wrote: > Hi! I=E2=80=99m from germany and my raid and me needs help. > My english isn=E2=80=99t very good, but i think it=E2=80=99s sufficie= nt. And i think,=20 > this mailinglist is my last hope =E2=98=BA This is the right place for problems with linux raid arrays. > So on, =E2=80=A6. Here ist my problem. > The raid5 has lost 2 of 5 disks. First one disk and then the second o= ne. Ok. Not uncommon. [trim /] > !SMART Status > for i in a b c d e f; do echo Device sd$i; smartctl -H /dev/sd$i |=20 > egrep overall; echo; done; Device sda SMART overall-health=20 > self-assessment test result: PASSED >=20 > Device sdb > SMART overall-health self-assessment test result: PASSED >=20 > Device sdc > SMART overall-health self-assessment test result: PASSED >=20 > Device sdd > SMART overall-health self-assessment test result: PASSED >=20 > Device sde > SMART overall-health self-assessment test result: PASSED >=20 > Device sdf > SMART overall-health self-assessment test result: PASSED It is extremely common to have an overall result of "PASSED" when you a= ren't safe at all. Please redo this without trimming, like so: =20 for x in /dev/sd[b-f] ; do echo $x ; smartctl -x $x ; done Paste the result at the end of you next mail--no need to attach nor nee= d for pastebin services. Also, if you still have any syslogs from the time of the failure, it wo= uld be good to see the kernel messages that triggered the drive ejectio= ns from the raid. > !mdadm version > mdadm - v3.2.5 - 18th May 2012 > I have read about recent versions 3.3.x @ raid.wiki.kernel.org, i hav= en=E2=80=99t tested this version. It may be necessary. You haven't reported your distro nor your kernel = version. > !superblock informations > Only the Events from sdb1 are off [trim /] Very good report! You've saved all the superblocks and you haven't tri= ed to do any --create operations. [trim /] > !reassemble force > mdadm --assemble /dev/md0 /dev/sdb1 /dev/sdc1 /dev/sdd1 /dev/sde1=20 > /dev/sdf1 --force > mdadm: ignoring /dev/sdd1 as it reports /dev/sdc1 as failed > mdadm: ignoring /dev/sde1 as it reports /dev/sdc1 as failed > mdadm: ignoring /dev/sdf1 as it reports /dev/sdc1 as failed > mdadm: /dev/md0 assembled from 1 drive - not enough to start the arra= y. This should have worked. Hmmm. > i hope i don=E2=80=99t get the award =E2=80=9Epaint onself in to the = corner=E2=80=9C =E2=80=A6=E2=80=A6 Probably not. :-) The simplest way forward would probably be to boot a rescue CD (I gener= ally use the one from sysrescuecd.org) that has a recent kernel and mda= dm combination. Such CDs will probably attempt to assemble your array = during boot to /dev/md127 instead of /dev/md0, but it will fail. So, within the rescue environment, do: mdadm --stop /dev/md127 {or whatever shows in /proc/mdstat} mdadm --assemble --force --verbose /dev/md0 /dev/sd[b-f]1 If that doesn't work, show us the verbose output, along with the matchi= ng part of the dmesg. If it does work, just do a clean shutdown and reboot back into your reg= ular OS. > merry christmas =E2=80=A6 David And Merry Christmas to you! When you are done celebrating the revival of your array, you will need = to find out why it broke in the first place. The most common cause see= n on this list is the use of consumer-grade drives without dealing with= the timeout mismatch problem. You might want to review this old threa= d: http://marc.info/?l=3Dlinux-raid&m=3D135811522817345&w=3D1 Phil #######################################################################= ############## root@pluto:~# for x in /dev/sd[b-f] ; do echo $x ; smartctl -x $x ; don= e /dev/sdb smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-43-generic] (local b= uild) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools= =2Eorg =3D=3D=3D START OF INFORMATION SECTION =3D=3D=3D Model Family: Western Digital Red (AF) Device Model: WDC WD30EFRX-68AX9N0 Serial Number: WD-WMC1T3211821 LU WWN Device Id: 5 0014ee 6034288f1 =46irmware Version: 80.00A80 User Capacity: 3.000.592.982.016 bytes [3,00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sun Dec 28 21:36:39 2014 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled =3D=3D=3D START OF READ SMART DATA SECTION =3D=3D=3D SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activit= y was never started. Auto Offline Data Collection: D= isabled. Self-test execution status: ( 0) The previous self-test routine = completed without error or no self-test h= as ever been run. Total time to complete Offline data collection: (40680) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate= =2E Auto Offline data collection on= /off support. Suspend Offline collection upon= new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before enterin= g power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging support= ed. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 408) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x70bd) SCT Status supported. SCT Error Recovery Control supp= orted. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 208 176 021 - 4583 4 Start_Stop_Count -O--CK 100 100 000 - 108 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 094 094 000 - 4704 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 107 192 Power-Off_Retract_Count -O--CK 200 200 000 - 16 193 Load_Cycle_Count -O--CK 200 200 000 - 91 194 Temperature_Celsius -O---K 113 103 000 - 37 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 31646 (device log contains only the most recent 24 = errors) CR =3D Command Register FEATR =3D Features Register COUNT =3D Count (was: Sector Count) Register LBA_48 =3D Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH =3D LBA High (was: Cylinder High) Register ] LBA LM =3D LBA Mid (was: Cylinder Low) Register ] Register LL =3D LBA Low (was: Sector Number) Register ] DV =3D Device (was: Device/Head) Register DC =3D Device Control Register ER =3D Error register ST =3D Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=3Ddays, hh=3Dhours, mm=3Dminutes, SS=3Dsec, and sss=3Dmillisec. It "wraps" after 49.710 days. Error 31646 [13] occurred at disk power-on lifetime: 4520 hours (188 da= ys + 8 hours) When the command that caused the error occurred, the device was activ= e or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- =3D=3D -- =3D=3D =3D=3D =3D=3D -- -- -- -- -- 04 -- 61 00 02 00 00 00 00 00 00 a0 00 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feat= ure_Name -- =3D=3D -- =3D=3D -- =3D=3D =3D=3D =3D=3D -- -- -- -- -- ---------= ------ -------------------- ef 00 10 00 02 00 00 00 00 00 00 a0 08 11d+03:17:23.154 SET FEATURES= [Enable SATA feature] ec 00 00 00 00 00 00 00 00 00 00 a0 08 11d+03:17:23.154 IDENTIFY DEV= ICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 11d+03:17:23.154 SET FEATURES= [Set transfer mode] ef 00 10 00 02 00 00 00 00 00 00 a0 08 11d+03:17:23.153 SET FEATURES= [Enable SATA feature] ec 00 00 00 00 00 00 00 00 00 00 a0 08 11d+03:17:23.153 IDENTIFY DEV= ICE Error 31645 [12] occurred at disk power-on lifetime: 4520 hours (188 da= ys + 8 hours) When the command that caused the error occurred, the device was activ= e or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- =3D=3D -- =3D=3D =3D=3D =3D=3D -- -- -- -- -- 04 -- 61 00 46 00 00 00 00 00 00 a0 00 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feat= ure_Name -- =3D=3D -- =3D=3D -- =3D=3D =3D=3D =3D=3D -- -- -- -- -- ---------= ------ -------------------- ef 00 03 00 46 00 00 00 00 00 00 a0 08 11d+03:17:23.154 SET FEATURES= [Set transfer mode] ef 00 10 00 02 00 00 00 00 00 00 a0 08 11d+03:17:23.153 SET FEATURES= [Enable SATA feature] ec 00 00 00 00 00 00 00 00 00 00 a0 08 11d+03:17:23.153 IDENTIFY DEV= ICE c8 00 00 00 08 00 00 00 00 00 00 e0 08 11d+03:17:23.153 READ DMA ef 00 10 00 02 00 00 00 00 00 00 a0 08 11d+03:17:23.153 SET FEATURES= [Enable SATA feature] Error 31644 [11] occurred at disk power-on lifetime: 4520 hours (188 da= ys + 8 hours) When the command that caused the error occurred, the device was activ= e or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- =3D=3D -- =3D=3D =3D=3D =3D=3D -- -- -- -- -- 04 -- 61 00 02 00 00 00 00 00 00 a0 00 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feat= ure_Name -- =3D=3D -- =3D=3D -- =3D=3D =3D=3D =3D=3D -- -- -- -- -- ---------= ------ -------------------- ef 00 10 00 02 00 00 00 00 00 00 a0 08 11d+03:17:23.153 SET FEATURES= [Enable SATA feature] ec 00 00 00 00 00 00 00 00 00 00 a0 08 11d+03:17:23.153 IDENTIFY DEV= ICE c8 00 00 00 08 00 00 00 00 00 00 e0 08 11d+03:17:23.153 READ DMA ef 00 10 00 02 00 00 00 00 00 00 a0 08 11d+03:17:23.153 SET FEATURES= [Enable SATA feature] ec 00 00 00 00 00 00 00 00 00 00 a0 08 11d+03:17:23.151 IDENTIFY DEV= ICE Error 31643 [10] occurred at disk power-on lifetime: 4520 hours (188 da= ys + 8 hours) When the command that caused the error occurred, the device was activ= e or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- =3D=3D -- =3D=3D =3D=3D =3D=3D -- -- -- -- -- 04 -- 61 00 08 00 00 00 00 00 00 e0 00 Device Fault; Error: ABRT 8 s= ectors at LBA =3D 0x00000000 =3D 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feat= ure_Name -- =3D=3D -- =3D=3D -- =3D=3D =3D=3D =3D=3D -- -- -- -- -- ---------= ------ -------------------- c8 00 00 00 08 00 00 00 00 00 00 e0 08 11d+03:17:23.153 READ DMA ef 00 10 00 02 00 00 00 00 00 00 a0 08 11d+03:17:23.153 SET FEATURES= [Enable SATA feature] ec 00 00 00 00 00 00 00 00 00 00 a0 08 11d+03:17:23.151 IDENTIFY DEV= ICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 11d+03:17:23.151 SET FEATURES= [Set transfer mode] ef 00 10 00 02 00 00 00 00 00 00 a0 08 11d+03:17:23.151 SET FEATURES= [Enable SATA feature] Error 31642 [9] occurred at disk power-on lifetime: 4520 hours (188 day= s + 8 hours) When the command that caused the error occurred, the device was activ= e or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- =3D=3D -- =3D=3D =3D=3D =3D=3D -- -- -- -- -- 04 -- 61 00 02 00 00 00 00 00 00 a0 00 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feat= ure_Name -- =3D=3D -- =3D=3D -- =3D=3D =3D=3D =3D=3D -- -- -- -- -- ---------= ------ -------------------- ef 00 10 00 02 00 00 00 00 00 00 a0 08 11d+03:17:23.153 SET FEATURES= [Enable SATA feature] ec 00 00 00 00 00 00 00 00 00 00 a0 08 11d+03:17:23.151 IDENTIFY DEV= ICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 11d+03:17:23.151 SET FEATURES= [Set transfer mode] ef 00 10 00 02 00 00 00 00 00 00 a0 08 11d+03:17:23.151 SET FEATURES= [Enable SATA feature] ec 00 00 00 00 00 00 00 00 00 00 a0 08 11d+03:17:23.151 IDENTIFY DEV= ICE Error 31641 [8] occurred at disk power-on lifetime: 4520 hours (188 day= s + 8 hours) When the command that caused the error occurred, the device was activ= e or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- =3D=3D -- =3D=3D =3D=3D =3D=3D -- -- -- -- -- 04 -- 61 00 46 00 00 00 00 00 00 a0 00 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feat= ure_Name -- =3D=3D -- =3D=3D -- =3D=3D =3D=3D =3D=3D -- -- -- -- -- ---------= ------ -------------------- ef 00 03 00 46 00 00 00 00 00 00 a0 08 11d+03:17:23.151 SET FEATURES= [Set transfer mode] ef 00 10 00 02 00 00 00 00 00 00 a0 08 11d+03:17:23.151 SET FEATURES= [Enable SATA feature] ec 00 00 00 00 00 00 00 00 00 00 a0 08 11d+03:17:23.151 IDENTIFY DEV= ICE c8 00 00 00 08 00 00 00 00 00 00 e0 08 11d+03:17:23.150 READ DMA ef 00 10 00 02 00 00 00 00 00 00 a0 08 11d+03:17:23.150 SET FEATURES= [Enable SATA feature] Error 31640 [7] occurred at disk power-on lifetime: 4520 hours (188 day= s + 8 hours) When the command that caused the error occurred, the device was activ= e or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- =3D=3D -- =3D=3D =3D=3D =3D=3D -- -- -- -- -- 04 -- 61 00 02 00 00 00 00 00 00 a0 00 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feat= ure_Name -- =3D=3D -- =3D=3D -- =3D=3D =3D=3D =3D=3D -- -- -- -- -- ---------= ------ -------------------- ef 00 10 00 02 00 00 00 00 00 00 a0 08 11d+03:17:23.151 SET FEATURES= [Enable SATA feature] ec 00 00 00 00 00 00 00 00 00 00 a0 08 11d+03:17:23.151 IDENTIFY DEV= ICE c8 00 00 00 08 00 00 00 00 00 00 e0 08 11d+03:17:23.150 READ DMA ef 00 10 00 02 00 00 00 00 00 00 a0 08 11d+03:17:23.150 SET FEATURES= [Enable SATA feature] ec 00 00 00 00 00 00 00 00 00 00 a0 08 11d+03:17:23.150 IDENTIFY DEV= ICE Error 31639 [6] occurred at disk power-on lifetime: 4520 hours (188 day= s + 8 hours) When the command that caused the error occurred, the device was activ= e or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- =3D=3D -- =3D=3D =3D=3D =3D=3D -- -- -- -- -- 04 -- 61 00 08 00 00 00 00 00 00 e0 00 Device Fault; Error: ABRT 8 s= ectors at LBA =3D 0x00000000 =3D 0 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feat= ure_Name -- =3D=3D -- =3D=3D -- =3D=3D =3D=3D =3D=3D -- -- -- -- -- ---------= ------ -------------------- c8 00 00 00 08 00 00 00 00 00 00 e0 08 11d+03:17:23.150 READ DMA ef 00 10 00 02 00 00 00 00 00 00 a0 08 11d+03:17:23.150 SET FEATURES= [Enable SATA feature] ec 00 00 00 00 00 00 00 00 00 00 a0 08 11d+03:17:23.150 IDENTIFY DEV= ICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 11d+03:17:23.149 SET FEATURES= [Set transfer mode] ef 00 10 00 02 00 00 00 00 00 00 a0 08 11d+03:17:23.149 SET FEATURES= [Enable SATA feature] SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(ho= urs) LBA_of_first_error # 1 Extended offline Interrupted (host reset) 60% 1605 = - # 2 Extended offline Completed without error 00% 1600 = - # 3 Extended offline Completed without error 00% 1579 = - # 4 Extended offline Completed without error 00% 1567 = - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute de= lay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 37 Celsius Power Cycle Min/Max Temperature: 21/39 Celsius Lifetime Min/Max Temperature: 16/47 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (135) Index Estimated Time Temperature Celsius 136 2014-12-28 13:39 37 ****************** ... ..(476 skipped). .. ****************** 135 2014-12-28 21:36 37 ****************** SCT Error Recovery Control: Read: 70 (7,0 seconds) Write: 70 (7,0 seconds) Device Statistics (GP Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COM= RESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS,= CRC 0x8000 4 303936 Vendor specific /dev/sdc smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-43-generic] (local b= uild) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools= =2Eorg =3D=3D=3D START OF INFORMATION SECTION =3D=3D=3D Model Family: Western Digital Red (AF) Device Model: WDC WD30EFRX-68AX9N0 Serial Number: WD-WMC1T3022609 LU WWN Device Id: 5 0014ee 603429af6 =46irmware Version: 80.00A80 User Capacity: 3.000.592.982.016 bytes [3,00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sun Dec 28 21:36:40 2014 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled =3D=3D=3D START OF READ SMART DATA SECTION =3D=3D=3D SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activit= y was never started. Auto Offline Data Collection: D= isabled. Self-test execution status: ( 0) The previous self-test routine = completed without error or no self-test h= as ever been run. Total time to complete Offline data collection: (39840) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate= =2E Auto Offline data collection on= /off support. Suspend Offline collection upon= new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before enterin= g power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging support= ed. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 399) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x70bd) SCT Status supported. SCT Error Recovery Control supp= orted. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 191 174 021 - 5450 4 Start_Stop_Count -O--CK 100 100 000 - 105 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 094 094 000 - 4713 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 104 192 Power-Off_Retract_Count -O--CK 200 200 000 - 12 193 Load_Cycle_Count -O--CK 200 200 000 - 92 194 Temperature_Celsius -O---K 113 102 000 - 37 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) Device Error Count: 17984 (device log contains only the most recent 24 = errors) CR =3D Command Register FEATR =3D Features Register COUNT =3D Count (was: Sector Count) Register LBA_48 =3D Upper bytes of LBA High/Mid/Low Registers ] ATA-8 LH =3D LBA High (was: Cylinder High) Register ] LBA LM =3D LBA Mid (was: Cylinder Low) Register ] Register LL =3D LBA Low (was: Sector Number) Register ] DV =3D Device (was: Device/Head) Register DC =3D Device Control Register ER =3D Error register ST =3D Status register Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=3Ddays, hh=3Dhours, mm=3Dminutes, SS=3Dsec, and sss=3Dmillisec. It "wraps" after 49.710 days. Error 17984 [7] occurred at disk power-on lifetime: 4545 hours (189 day= s + 9 hours) When the command that caused the error occurred, the device was activ= e or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- =3D=3D -- =3D=3D =3D=3D =3D=3D -- -- -- -- -- 04 -- 61 00 3f 00 00 0f 00 00 01 af 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feat= ure_Name -- =3D=3D -- =3D=3D -- =3D=3D =3D=3D =3D=3D -- -- -- -- -- ---------= ------ -------------------- 91 00 20 00 3f 00 00 0f 00 00 01 af 00 15:41:39.736 INITIALIZE D= EVICE PARAMETERS [OBS-6] ec 00 00 00 00 00 00 00 00 00 01 a0 00 15:41:39.734 IDENTIFY DEV= ICE ec 00 00 00 01 00 00 00 00 00 01 a0 00 15:41:39.438 IDENTIFY DEV= ICE ef 00 10 00 02 00 00 00 00 00 00 a0 08 15:41:32.452 SET FEATURES= [Enable SATA feature] ec 00 00 00 00 00 00 00 00 00 00 a0 08 15:41:32.451 IDENTIFY DEV= ICE Error 17983 [6] occurred at disk power-on lifetime: 4545 hours (189 day= s + 9 hours) When the command that caused the error occurred, the device was activ= e or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- =3D=3D -- =3D=3D =3D=3D =3D=3D -- -- -- -- -- 04 -- 61 00 02 00 00 00 00 00 00 a0 00 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feat= ure_Name -- =3D=3D -- =3D=3D -- =3D=3D =3D=3D =3D=3D -- -- -- -- -- ---------= ------ -------------------- ef 00 10 00 02 00 00 00 00 00 00 a0 08 15:41:32.452 SET FEATURES= [Enable SATA feature] ec 00 00 00 00 00 00 00 00 00 00 a0 08 15:41:32.451 IDENTIFY DEV= ICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 15:41:32.451 SET FEATURES= [Set transfer mode] ef 00 10 00 02 00 00 00 00 00 00 a0 08 15:41:32.447 SET FEATURES= [Enable SATA feature] ec 00 00 00 00 00 00 00 00 00 00 a0 08 15:41:32.446 IDENTIFY DEV= ICE Error 17982 [5] occurred at disk power-on lifetime: 4545 hours (189 day= s + 9 hours) When the command that caused the error occurred, the device was activ= e or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- =3D=3D -- =3D=3D =3D=3D =3D=3D -- -- -- -- -- 04 -- 61 00 46 00 00 00 00 00 00 a0 00 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feat= ure_Name -- =3D=3D -- =3D=3D -- =3D=3D =3D=3D =3D=3D -- -- -- -- -- ---------= ------ -------------------- ef 00 03 00 46 00 00 00 00 00 00 a0 08 15:41:32.451 SET FEATURES= [Set transfer mode] ef 00 10 00 02 00 00 00 00 00 00 a0 08 15:41:32.447 SET FEATURES= [Enable SATA feature] ec 00 00 00 00 00 00 00 00 00 00 a0 08 15:41:32.446 IDENTIFY DEV= ICE ea 00 00 00 00 00 00 00 00 00 00 e0 08 15:41:32.421 FLUSH CACHE = EXT ef 00 10 00 02 00 00 00 00 00 00 a0 08 15:41:32.417 SET FEATURES= [Enable SATA feature] Error 17981 [4] occurred at disk power-on lifetime: 4545 hours (189 day= s + 9 hours) When the command that caused the error occurred, the device was activ= e or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- =3D=3D -- =3D=3D =3D=3D =3D=3D -- -- -- -- -- 04 -- 61 00 02 00 00 00 00 00 00 a0 00 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feat= ure_Name -- =3D=3D -- =3D=3D -- =3D=3D =3D=3D =3D=3D -- -- -- -- -- ---------= ------ -------------------- ef 00 10 00 02 00 00 00 00 00 00 a0 08 15:41:32.447 SET FEATURES= [Enable SATA feature] ec 00 00 00 00 00 00 00 00 00 00 a0 08 15:41:32.446 IDENTIFY DEV= ICE ea 00 00 00 00 00 00 00 00 00 00 e0 08 15:41:32.421 FLUSH CACHE = EXT ef 00 10 00 02 00 00 00 00 00 00 a0 08 15:41:32.417 SET FEATURES= [Enable SATA feature] ec 00 00 00 00 00 00 00 00 00 00 a0 08 15:41:32.417 IDENTIFY DEV= ICE Error 17980 [3] occurred at disk power-on lifetime: 4545 hours (189 day= s + 9 hours) When the command that caused the error occurred, the device was activ= e or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- =3D=3D -- =3D=3D =3D=3D =3D=3D -- -- -- -- -- 04 -- 61 00 00 00 00 00 00 00 00 a0 00 Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feat= ure_Name -- =3D=3D -- =3D=3D -- =3D=3D =3D=3D =3D=3D -- -- -- -- -- ---------= ------ -------------------- ea 00 00 00 00 00 00 00 00 00 00 e0 08 15:41:32.421 FLUSH CACHE = EXT ef 00 10 00 02 00 00 00 00 00 00 a0 08 15:41:32.417 SET FEATURES= [Enable SATA feature] ec 00 00 00 00 00 00 00 00 00 00 a0 08 15:41:32.417 IDENTIFY DEV= ICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 15:41:32.416 SET FEATURES= [Set transfer mode] ef 00 10 00 02 00 00 00 00 00 00 a0 08 15:41:32.412 SET FEATURES= [Enable SATA feature] Error 17979 [2] occurred at disk power-on lifetime: 4545 hours (189 day= s + 9 hours) When the command that caused the error occurred, the device was activ= e or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- =3D=3D -- =3D=3D =3D=3D =3D=3D -- -- -- -- -- 04 -- 61 00 02 00 00 00 00 00 00 a0 00 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feat= ure_Name -- =3D=3D -- =3D=3D -- =3D=3D =3D=3D =3D=3D -- -- -- -- -- ---------= ------ -------------------- ef 00 10 00 02 00 00 00 00 00 00 a0 08 15:41:32.417 SET FEATURES= [Enable SATA feature] ec 00 00 00 00 00 00 00 00 00 00 a0 08 15:41:32.417 IDENTIFY DEV= ICE ef 00 03 00 46 00 00 00 00 00 00 a0 08 15:41:32.416 SET FEATURES= [Set transfer mode] ef 00 10 00 02 00 00 00 00 00 00 a0 08 15:41:32.412 SET FEATURES= [Enable SATA feature] ec 00 00 00 00 00 00 00 00 00 00 a0 08 15:41:32.412 IDENTIFY DEV= ICE Error 17978 [1] occurred at disk power-on lifetime: 4545 hours (189 day= s + 9 hours) When the command that caused the error occurred, the device was activ= e or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- =3D=3D -- =3D=3D =3D=3D =3D=3D -- -- -- -- -- 04 -- 61 00 46 00 00 00 00 00 00 a0 00 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feat= ure_Name -- =3D=3D -- =3D=3D -- =3D=3D =3D=3D =3D=3D -- -- -- -- -- ---------= ------ -------------------- ef 00 03 00 46 00 00 00 00 00 00 a0 08 15:41:32.416 SET FEATURES= [Set transfer mode] ef 00 10 00 02 00 00 00 00 00 00 a0 08 15:41:32.412 SET FEATURES= [Enable SATA feature] ec 00 00 00 00 00 00 00 00 00 00 a0 08 15:41:32.412 IDENTIFY DEV= ICE ea 00 00 00 00 00 00 00 00 00 00 e0 08 15:41:32.387 FLUSH CACHE = EXT ef 00 10 00 02 00 00 00 00 00 00 a0 08 15:41:32.383 SET FEATURES= [Enable SATA feature] Error 17977 [0] occurred at disk power-on lifetime: 4545 hours (189 day= s + 9 hours) When the command that caused the error occurred, the device was activ= e or idle. After command completion occurred, registers were: ER -- ST COUNT LBA_48 LH LM LL DV DC -- -- -- =3D=3D -- =3D=3D =3D=3D =3D=3D -- -- -- -- -- 04 -- 61 00 02 00 00 00 00 00 00 a0 00 Device Fault; Error: ABRT Commands leading to the command that caused the error were: CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feat= ure_Name -- =3D=3D -- =3D=3D -- =3D=3D =3D=3D =3D=3D -- -- -- -- -- ---------= ------ -------------------- ef 00 10 00 02 00 00 00 00 00 00 a0 08 15:41:32.412 SET FEATURES= [Enable SATA feature] ec 00 00 00 00 00 00 00 00 00 00 a0 08 15:41:32.412 IDENTIFY DEV= ICE ea 00 00 00 00 00 00 00 00 00 00 e0 08 15:41:32.387 FLUSH CACHE = EXT ef 00 10 00 02 00 00 00 00 00 00 a0 08 15:41:32.383 SET FEATURES= [Enable SATA feature] ec 00 00 00 00 00 00 00 00 00 00 a0 08 15:41:32.383 IDENTIFY DEV= ICE SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(ho= urs) LBA_of_first_error # 1 Extended offline Interrupted (host reset) 60% 1614 = - # 2 Extended offline Completed without error 00% 1609 = - # 3 Extended offline Completed without error 00% 1588 = - # 4 Extended offline Completed without error 00% 1575 = - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute de= lay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 37 Celsius Power Cycle Min/Max Temperature: 22/39 Celsius Lifetime Min/Max Temperature: 15/48 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (190) Index Estimated Time Temperature Celsius 191 2014-12-28 13:39 37 ****************** ... ..(476 skipped). .. ****************** 190 2014-12-28 21:36 37 ****************** SCT Error Recovery Control: Read: 70 (7,0 seconds) Write: 70 (7,0 seconds) Device Statistics (GP Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COM= RESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS,= CRC 0x8000 4 303934 Vendor specific /dev/sdd smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-43-generic] (local b= uild) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools= =2Eorg =3D=3D=3D START OF INFORMATION SECTION =3D=3D=3D Model Family: Western Digital Red (AF) Device Model: WDC WD30EFRX-68AX9N0 Serial Number: WD-WMC1T3222539 LU WWN Device Id: 5 0014ee 603429eeb =46irmware Version: 80.00A80 User Capacity: 3.000.592.982.016 bytes [3,00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sun Dec 28 21:36:40 2014 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, frozen [SEC2] Wt Cache Reorder: Enabled =3D=3D=3D START OF READ SMART DATA SECTION =3D=3D=3D SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activit= y was never started. Auto Offline Data Collection: D= isabled. Self-test execution status: ( 0) The previous self-test routine = completed without error or no self-test h= as ever been run. Total time to complete Offline data collection: (38400) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate= =2E Auto Offline data collection on= /off support. Suspend Offline collection upon= new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before enterin= g power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging support= ed. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 385) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x70bd) SCT Status supported. SCT Error Recovery Control supp= orted. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 205 171 021 - 4733 4 Start_Stop_Count -O--CK 100 100 000 - 105 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 094 094 000 - 4696 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 100 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 104 192 Power-Off_Retract_Count -O--CK 200 200 000 - 11 193 Load_Cycle_Count -O--CK 200 200 000 - 93 194 Temperature_Celsius -O---K 110 099 000 - 40 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 147 000 - 67 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(ho= urs) LBA_of_first_error # 1 Extended offline Interrupted (host reset) 60% 1597 = - # 2 Extended offline Completed without error 00% 1591 = - # 3 Extended offline Completed without error 00% 1570 = - # 4 Extended offline Completed without error 00% 1557 = - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute de= lay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 40 Celsius Power Cycle Min/Max Temperature: 21/41 Celsius Lifetime Min/Max Temperature: 15/51 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (70) Index Estimated Time Temperature Celsius 71 2014-12-28 13:39 39 ******************** ... ..(186 skipped). .. ******************** 258 2014-12-28 16:46 39 ******************** 259 2014-12-28 16:47 40 ********************* ... ..( 10 skipped). .. ********************* 270 2014-12-28 16:58 40 ********************* 271 2014-12-28 16:59 39 ******************** ... ..(276 skipped). .. ******************** 70 2014-12-28 21:36 39 ******************** SCT Error Recovery Control: Read: 70 (7,0 seconds) Write: 70 (7,0 seconds) Device Statistics (GP Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COM= RESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS,= CRC 0x8000 4 303940 Vendor specific /dev/sde smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-43-generic] (local b= uild) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools= =2Eorg =3D=3D=3D START OF INFORMATION SECTION =3D=3D=3D Model Family: Western Digital Red (AF) Device Model: WDC WD30EFRX-68AX9N0 Serial Number: WD-WMC1T3057889 LU WWN Device Id: 5 0014ee 658a09a4d =46irmware Version: 80.00A80 User Capacity: 3.000.592.982.016 bytes [3,00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sun Dec 28 21:36:40 2014 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled =3D=3D=3D START OF READ SMART DATA SECTION =3D=3D=3D SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activit= y was never started. Auto Offline Data Collection: D= isabled. Self-test execution status: ( 0) The previous self-test routine = completed without error or no self-test h= as ever been run. Total time to complete Offline data collection: (39720) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate= =2E Auto Offline data collection on= /off support. Suspend Offline collection upon= new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before enterin= g power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging support= ed. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 399) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x70bd) SCT Status supported. SCT Error Recovery Control supp= orted. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 187 171 021 - 5608 4 Start_Stop_Count -O--CK 100 100 000 - 101 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 094 094 000 - 4606 10 Spin_Retry_Count -O--CK 100 100 000 - 0 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 100 192 Power-Off_Retract_Count -O--CK 200 200 000 - 9 193 Load_Cycle_Count -O--CK 200 200 000 - 91 194 Temperature_Celsius -O---K 113 105 000 - 37 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) Num Test_Description Status Remaining LifeTime(ho= urs) LBA_of_first_error # 1 Extended offline Interrupted (host reset) 60% 1508 = - # 2 Extended offline Completed without error 00% 1502 = - # 3 Extended offline Completed without error 00% 1481 = - # 4 Extended offline Completed without error 00% 1469 = - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute de= lay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 37 Celsius Power Cycle Min/Max Temperature: 22/39 Celsius Lifetime Min/Max Temperature: 16/46 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (9) Index Estimated Time Temperature Celsius 10 2014-12-28 13:39 37 ****************** ... ..(476 skipped). .. ****************** 9 2014-12-28 21:36 37 ****************** SCT Error Recovery Control: Read: 70 (7,0 seconds) Write: 70 (7,0 seconds) Device Statistics (GP Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COM= RESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS,= CRC 0x8000 4 303940 Vendor specific /dev/sdf smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-43-generic] (local b= uild) Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools= =2Eorg =3D=3D=3D START OF INFORMATION SECTION =3D=3D=3D Model Family: Western Digital Red (AF) Device Model: WDC WD30EFRX-68EUZN0 Serial Number: WD-WMC4N0368841 LU WWN Device Id: 5 0014ee 6ae752b54 =46irmware Version: 80.00A80 User Capacity: 3.000.592.982.016 bytes [3,00 TB] Sector Sizes: 512 bytes logical, 4096 bytes physical Rotation Rate: 5400 rpm Device is: In smartctl database [for details use: -P show] ATA Version is: ACS-2 (minor revision not indicated) SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s) Local Time is: Sun Dec 28 21:36:40 2014 CET SMART support is: Available - device has SMART capability. SMART support is: Enabled AAM feature is: Unavailable APM feature is: Unavailable Rd look-ahead is: Enabled Write cache is: Enabled ATA Security is: Disabled, NOT FROZEN [SEC1] Wt Cache Reorder: Enabled =3D=3D=3D START OF READ SMART DATA SECTION =3D=3D=3D SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x00) Offline data collection activit= y was never started. Auto Offline Data Collection: D= isabled. Self-test execution status: ( 0) The previous self-test routine = completed without error or no self-test h= as ever been run. Total time to complete Offline data collection: (40980) seconds. Offline data collection capabilities: (0x7b) SMART execute Offline immediate= =2E Auto Offline data collection on= /off support. Suspend Offline collection upon= new command. Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before enterin= g power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. General Purpose Logging support= ed. Short self-test routine recommended polling time: ( 2) minutes. Extended self-test routine recommended polling time: ( 411) minutes. Conveyance self-test routine recommended polling time: ( 5) minutes. SCT capabilities: (0x703d) SCT Status supported. SCT Error Recovery Control supp= orted. SCT Feature Control supported. SCT Data Table supported. SMART Attributes Data Structure revision number: 16 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE 1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 3 Spin_Up_Time POS--K 207 173 021 - 4641 4 Start_Stop_Count -O--CK 100 100 000 - 50 5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 7 Seek_Error_Rate -OSR-K 200 200 000 - 0 9 Power_On_Hours -O--CK 096 096 000 - 3098 10 Spin_Retry_Count -O--CK 100 253 000 - 0 11 Calibration_Retry_Count -O--CK 100 253 000 - 0 12 Power_Cycle_Count -O--CK 100 100 000 - 50 192 Power-Off_Retract_Count -O--CK 200 200 000 - 6 193 Load_Cycle_Count -O--CK 200 200 000 - 43 194 Temperature_Celsius -O---K 113 102 000 - 37 196 Reallocated_Event_Count -O--CK 200 200 000 - 0 197 Current_Pending_Sector -O--CK 200 200 000 - 0 198 Offline_Uncorrectable ----CK 100 253 000 - 0 199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 200 Multi_Zone_Error_Rate ---R-- 100 253 000 - 0 ||||||_ K auto-keep |||||__ C event count ||||___ R error rate |||____ S speed/performance ||_____ O updated online |______ P prefailure warning General Purpose Log Directory Version 1 SMART Log Directory Version 1 [multi-sector log support] Address Access R/W Size Description 0x00 GPL,SL R/O 1 Log Directory 0x01 SL R/O 1 Summary SMART error log 0x02 SL R/O 5 Comprehensive SMART error log 0x03 GPL R/O 6 Ext. Comprehensive SMART error log 0x06 SL R/O 1 SMART self-test log 0x07 GPL R/O 1 Extended self-test log 0x09 SL R/W 1 Selective self-test log 0x10 GPL R/O 1 NCQ Command Error log 0x11 GPL R/O 1 SATA Phy Event Counters 0x21 GPL R/O 1 Write stream error log 0x22 GPL R/O 1 Read stream error log 0x80-0x9f GPL,SL R/W 16 Host vendor specific log 0xa0-0xa7 GPL,SL VS 16 Device vendor specific log 0xa8-0xb7 GPL,SL VS 1 Device vendor specific log 0xbd GPL,SL VS 1 Device vendor specific log 0xc0 GPL,SL VS 1 Device vendor specific log 0xc1 GPL VS 93 Device vendor specific log 0xe0 GPL,SL R/W 1 SCT Command/Status 0xe1 GPL,SL R/W 1 SCT Data Transfer SMART Extended Comprehensive Error Log Version: 1 (6 sectors) No Errors Logged SMART Extended Self-test Log Version: 1 (1 sectors) No self-tests have been logged. [To run self-tests, use: smartctl -t] SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute de= lay. SCT Status Version: 3 SCT Version (vendor specific): 258 (0x0102) SCT Support Level: 1 Device State: Active (0) Current Temperature: 37 Celsius Power Cycle Min/Max Temperature: 22/39 Celsius Lifetime Min/Max Temperature: 16/48 Celsius Under/Over Temperature Limit Count: 0/0 SCT Temperature History Version: 2 Temperature Sampling Period: 1 minute Temperature Logging Interval: 1 minute Min/Max recommended Temperature: 0/60 Celsius Min/Max Temperature Limit: -41/85 Celsius Temperature History Size (Index): 478 (401) Index Estimated Time Temperature Celsius 402 2014-12-28 13:39 37 ****************** ... ..(476 skipped). .. ****************** 401 2014-12-28 21:36 37 ****************** SCT Error Recovery Control: Read: 70 (7,0 seconds) Write: 70 (7,0 seconds) Device Statistics (GP Log 0x04) not supported SATA Phy Event Counters (GP Log 0x11) ID Size Value Description 0x0001 2 0 Command failed due to ICRC error 0x0002 2 0 R_ERR response for data FIS 0x0003 2 0 R_ERR response for device-to-host data FIS 0x0004 2 0 R_ERR response for host-to-device data FIS 0x0005 2 0 R_ERR response for non-data FIS 0x0006 2 0 R_ERR response for device-to-host non-data FIS 0x0007 2 0 R_ERR response for host-to-device non-data FIS 0x0008 2 0 Device-to-host non-data FIS retries 0x0009 2 4 Transition from drive PhyRdy to drive PhyNRdy 0x000a 2 3 Device-to-host register FISes sent due to a COM= RESET 0x000b 2 0 CRC errors within host-to-device FIS 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC 0x0012 2 0 R_ERR response for host-to-device non-data FIS,= CRC 0x8000 4 303942 Vendor specific root@pluto:~# -- To unsubscribe from this list: send the line "unsubscribe linux-raid" i= n the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html