From: "David M. Strang" <dstrang@shellpower.net>
To: Forrest Taylor <ftaylor@redhat.com>
Cc: Linux RAID <linux-raid@vger.kernel.org>
Subject: Re: raid5: Disk failure on sdm, disabling device
Date: Wed, 31 Aug 2005 16:53:19 -0400 [thread overview]
Message-ID: <009601c5ae6e$04d4d5e0$c100a8c0@NCNF5131FTH> (raw)
In-Reply-To: 008b01c5ae6c$e4db5e90$c100a8c0@NCNF5131FTH
On Wed, 2005-08-31 at 14:45, David M. Strang wrote:
>On Wed, 2005-08-31 at 14:39, Forrest Taylor wrote:
>> If you are running 2.4 kernel, did you try running rescan-scsi-bus.sh
>> (http://www.garloff.de/kurt/linux/rescan-scsi-bus.sh)?
> uname -ar
> Linux abyss 2.6.11.12 #2 SMP Thu Jul 21 07:49:40 UTC 2005 i686 unknown
> unknown GNU/Linux
> Will it work on 2.6?
http://bash.cyberciti.biz/diskadmin/rescan-scsi-bus.sh.html
Tried the above script...
Host adapter 0 (aic7xxx) found.
Host adapter 1 (aic7xxx) found.
Host adapter 2 (qla2xxx) found.
Scanning hosts 0 1 2 channels 0 for
SCSI target IDs 0 1 2 3 4 5 6 7 , LUNs 0
Scanning for device 1 0 6 0 ...
OLD: Host: scsi1 Channel: 00 Id: 06 Lun: 00
Vendor: HP Model: Ultrium 1-SCSI Rev: E34A
Type: Sequential-Access ANSI SCSI revision: 03
Scanning for device 2 0 0 0 ...
OLD: Host: scsi2 Channel: 00 Id: 00 Lun: 00
Vendor: SEAGATE Model: ST373405FC Rev: DF00
Type: Direct-Access ANSI SCSI revision: 03
Scanning for device 2 0 1 0 ...
OLD: Host: scsi2 Channel: 00 Id: 01 Lun: 00
Vendor: SEAGATE Model: ST373405FC Rev: DF00
Type: Direct-Access ANSI SCSI revision: 03
Scanning for device 2 0 2 0 ...
OLD: Host: scsi2 Channel: 00 Id: 02 Lun: 00
Vendor: SEAGATE Model: ST373405FC Rev: DF00
Type: Direct-Access ANSI SCSI revision: 03
Scanning for device 2 0 3 0 ...
OLD: Host: scsi2 Channel: 00 Id: 03 Lun: 00
Vendor: SEAGATE Model: ST373405FC Rev: DF00
Type: Direct-Access ANSI SCSI revision: 03
Scanning for device 2 0 4 0 ...
OLD: Host: scsi2 Channel: 00 Id: 04 Lun: 00
Vendor: SEAGATE Model: ST373405FC Rev: DF00
Type: Direct-Access ANSI SCSI revision: 03
Scanning for device 2 0 5 0 ...
OLD: Host: scsi2 Channel: 00 Id: 05 Lun: 00
Vendor: SEAGATE Model: ST373405FC Rev: DF00
Type: Direct-Access ANSI SCSI revision: 03
Scanning for device 2 0 6 0 ...
OLD: Host: scsi2 Channel: 00 Id: 06 Lun: 00
Vendor: SEAGATE Model: ST373405FC Rev: DF00
Type: Direct-Access ANSI SCSI revision: 03
Scanning for device 2 0 7 0 ...
OLD: Host: scsi2 Channel: 00 Id: 07 Lun: 00
Vendor: SEAGATE Model: ST373405FC Rev: DF00
Type: Direct-Access ANSI SCSI revision: 03
0 new device(s) found.
0 device(s) removed.
The output is odd... It only sees 7 of the 28 devices.
-- David
next prev parent reply other threads:[~2005-08-31 20:53 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-08-31 19:26 raid5: Disk failure on sdm, disabling device David M. Strang
2005-08-31 19:28 ` Forrest Taylor
2005-08-31 19:38 ` David M. Strang
2005-08-31 19:29 ` Michael Tokarev
2005-08-31 19:41 ` David M. Strang
2005-08-31 20:07 ` Michael Tokarev
2005-08-31 20:28 ` David M. Strang
2005-08-31 20:35 ` Michael Tokarev
2005-08-31 20:39 ` Forrest Taylor
2005-08-31 20:45 ` David M. Strang
2005-08-31 20:53 ` David M. Strang [this message]
2005-08-31 20:59 ` Forrest Taylor
2005-08-31 20:53 ` Forrest Taylor
2005-08-31 21:01 ` David M. Strang
2005-08-31 21:02 ` Forrest Taylor
2005-08-31 21:05 ` David M. Strang
2005-08-31 21:29 ` Michael Tokarev
2005-08-31 21:34 ` David M. Strang
2005-08-31 22:19 ` Forrest Taylor
2005-09-01 7:38 ` David M. Strang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to='009601c5ae6e$04d4d5e0$c100a8c0@NCNF5131FTH' \
--to=dstrang@shellpower.net \
--cc=ftaylor@redhat.com \
--cc=linux-raid@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox