linux-raid.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: djani22@dynamicweb.hu
To: Raz Ben Jehuda <razb@bitband.com>
Cc: linux-raid@vger.kernel.org
Subject: Re: RAID5 question.
Date: Thu, 4 Aug 2005 18:13:15 +0200	[thread overview]
Message-ID: <027f01c5990f$6e8200e0$0400a8c0@LocalHost> (raw)
In-Reply-To: 1123171018.9269.1.camel@localhost.localdomain

Yes, it is there, I know it.
But its only for resync or not? :-)

----- Original Message -----
From: "Raz Ben Jehuda" <razb@bitband.com>
To: <djani22@dynamicweb.hu>
Cc: "David Greaves" <david@dgreaves.com>; <linux-raid@vger.kernel.org>
Sent: Thursday, August 04, 2005 5:56 PM
Subject: Re: RAID5 question.


> take a look at /proc/sys/dev/raid/speed_limit_max . it is kilobytes if i
> recall correctly.
>
> On Thu, 2005-08-04 at 17:45 +0200, djani22@dynamicweb.hu wrote:
> > Thanks a lot for you, and Raz!
> >
> > The raw devices readahead I already set with the hdparm, and
> > /sys/block/*/queue/read_ahead_kb, but the md device is only changeable
with
> > blockdev. :-)
> > I dont use lvm, because it is too slow for me....
> >
> > But unfortunately the problem is still here for me. :(
> > I continue searching the bottleneck...
> >
> > Thanks!
> >
> > Janos
> >
> > ----- Original Message -----
> > From: "David Greaves" <david@dgreaves.com>
> > To: "Raz Ben Jehuda" <razb@bitband.com>
> > Cc: <djani22@dynamicweb.hu>; <linux-raid@vger.kernel.org>
> > Sent: Thursday, August 04, 2005 4:56 PM
> > Subject: Re: RAID5 question.
> >
> >
> > > And notice you can apply different readahead to:
> > > The raw devices (/dev/sda)
> > > The md device (/dev/mdX)
> > > Any lvm device (/dev/lvm_name/lvm_device)
> > >
> > > David
> > >
> > > Raz Ben Jehuda wrote:
> > >
> > > >read the blockdev man page
> > > >
> > > >On Thu, 2005-08-04 at 16:06 +0200, djani22@dynamicweb.hu wrote:
> > > >
> > > >
> > > >>Hi list, Neil!
> > > >>
> > > >>I have a little question because I'v got some performance problem...
> > > >>Is the RAID5 do any type of headahead with the default config?
> > > >>It is possible to disable the readahead? (if it is.)
> > > >>Or just the io_sched do that on the disks?
> > > >>
> > > >>How can I disable the whole headahead on top of the RAID5 array?
> > > >>
> > > >>The RAID5 can do multiple small (<4kb) reads of disks for the
> > multithreaded
> > > >>read requests?
> > > >>(chunk size is 32k)
> > > >>
> > > >>Thanks for helping!
> > > >>
> > > >>Janos
> > > >>
> > > >>-
> > > >>To unsubscribe from this list: send the line "unsubscribe
linux-raid" in
> > > >>the body of a message to majordomo@vger.kernel.org
> > > >>More majordomo info at  http://vger.kernel.org/majordomo-info.html
> > > >>
> > > >>
> > >
> > >
> > > --
> > >
> > > -
> > > To unsubscribe from this list: send the line "unsubscribe linux-raid"
in
> > > the body of a message to majordomo@vger.kernel.org
> > > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> >
> > -
> > To unsubscribe from this list: send the line "unsubscribe linux-raid" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> --
> Raz
> Long live the penguin
>
> -
> To unsubscribe from this list: send the line "unsubscribe linux-raid" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html


  reply	other threads:[~2005-08-04 16:13 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2005-08-04  5:43 ANNOUNCE: mdadm 2.0-devel-3 DEVELOPMENT RELEASE - A tool for managing Soft RAID under Linux Neil Brown
     [not found] ` <01f001c598fd$c59a51a0$0400a8c0@LocalHost>
     [not found]   ` <1123164866.8854.0.camel@localhost.localdomain>
2005-08-04 14:56     ` RAID5 question David Greaves
2005-08-04 15:45       ` djani22
2005-08-04 15:56         ` Raz Ben Jehuda
2005-08-04 16:13           ` djani22 [this message]
2005-08-04 16:25             ` Raz Ben Jehuda
2005-08-04 16:43               ` djani22
2005-08-04 20:53   ` Neil Brown
2005-08-07 11:40     ` David Greaves

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to='027f01c5990f$6e8200e0$0400a8c0@LocalHost' \
    --to=djani22@dynamicweb.hu \
    --cc=linux-raid@vger.kernel.org \
    --cc=razb@bitband.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).