From: NeilBrown <neilb@suse.de>
To: Andrew Morton <akpm@osdl.org>
Cc: linux-raid@vger.kernel.org
Subject: [PATCH md 002 of 18] Fix locking problem in r5/r6
Date: Mon, 28 Nov 2005 10:39:45 +1100 [thread overview]
Message-ID: <1051127233945.14757@suse.de> (raw)
In-Reply-To: 20051128102824.14498.patches@notabene
bitmap_unplug actually writes data (bits) to storage, so we
shouldn't be holding a spinlock...
Signed-off-by: Neil Brown <neilb@suse.de>
### Diffstat output
./drivers/md/raid5.c | 2 ++
./drivers/md/raid6main.c | 2 ++
2 files changed, 4 insertions(+)
diff ./drivers/md/raid5.c~current~ ./drivers/md/raid5.c
--- ./drivers/md/raid5.c~current~ 2005-11-28 10:08:19.000000000 +1100
+++ ./drivers/md/raid5.c 2005-11-28 10:08:33.000000000 +1100
@@ -1704,7 +1704,9 @@ static void raid5d (mddev_t *mddev)
if (conf->seq_flush - conf->seq_write > 0) {
int seq = conf->seq_flush;
+ spin_unlock_irq(&conf->device_lock);
bitmap_unplug(mddev->bitmap);
+ spin_lock_irq(&conf->device_lock);
conf->seq_write = seq;
activate_bit_delay(conf);
}
diff ./drivers/md/raid6main.c~current~ ./drivers/md/raid6main.c
--- ./drivers/md/raid6main.c~current~ 2005-11-28 10:08:19.000000000 +1100
+++ ./drivers/md/raid6main.c 2005-11-28 10:08:33.000000000 +1100
@@ -1784,7 +1784,9 @@ static void raid6d (mddev_t *mddev)
if (conf->seq_flush - conf->seq_write > 0) {
int seq = conf->seq_flush;
+ spin_unlock_irq(&conf->device_lock);
bitmap_unplug(mddev->bitmap);
+ spin_lock_irq(&conf->device_lock);
conf->seq_write = seq;
activate_bit_delay(conf);
}
next prev parent reply other threads:[~2005-11-27 23:39 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-11-27 23:39 [PATCH md 000 of 18] Introduction NeilBrown
2005-11-27 23:39 ` [PATCH md 001 of 18] Improve read speed to raid10 arrays using 'far copies' NeilBrown
2005-11-27 23:39 ` NeilBrown [this message]
2005-11-27 23:39 ` [PATCH md 003 of 18] Fix problem with raid6 intent bitmap NeilBrown
2005-11-27 23:39 ` [PATCH md 004 of 18] Set default_bitmap_offset properly in set_array_info NeilBrown
2005-11-27 23:40 ` [PATCH md 005 of 18] Fix --re-add for raid1 and raid6 NeilBrown
2005-11-27 23:40 ` [PATCH md 006 of 18] Improve raid1 "IO Barrier" concept NeilBrown
2005-11-27 23:40 ` [PATCH md 007 of 18] Improve raid10 " NeilBrown
2005-11-27 23:40 ` [PATCH md 008 of 18] Small cleanups for raid5 NeilBrown
2005-11-27 23:40 ` [PATCH md 010 of 18] Move bitmap_create to after md array has been initialised NeilBrown
2005-11-27 23:40 ` [PATCH md 011 of 18] Write intent bitmap support for raid10 NeilBrown
2005-11-27 23:40 ` [PATCH md 012 of 18] Fix raid6 resync check/repair code NeilBrown
2005-11-27 23:40 ` [PATCH md 013 of 18] Improve handing of read errors with raid6 NeilBrown
2005-11-30 22:33 ` Carlos Carvalho
2005-12-01 2:54 ` Neil Brown
2005-11-27 23:40 ` [PATCH md 014 of 18] Attempt to auto-correct read errors in raid1 NeilBrown
2005-11-29 16:38 ` Paul Clements
2005-11-29 23:21 ` Neil Brown
2005-11-27 23:40 ` [PATCH md 015 of 18] Tidyup some issues with raid1 resync and prepare for catching read errors NeilBrown
2005-11-27 23:40 ` [PATCH md 016 of 18] Better handling for read error in raid1 during resync NeilBrown
2005-11-27 23:41 ` [PATCH md 017 of 18] Handle errors when read-only NeilBrown
2005-12-10 6:41 ` Yanggun
2005-12-10 6:59 ` raid1 mysteriously switching to read-only Neil Brown
2005-12-10 7:50 ` Yanggun
2005-12-10 8:02 ` Neil Brown
2005-12-10 8:10 ` Yanggun
2005-12-10 12:10 ` Neil Brown
2005-12-11 13:04 ` Yanggun
2005-12-11 14:14 ` Patrik Jonsson
2005-12-11 14:29 ` Yanggun
2005-12-11 17:13 ` Ross Vandegrift
2005-12-11 23:28 ` Yanggun
2005-11-27 23:41 ` [PATCH md 018 of 18] Fix up some rdev rcu locking in raid5/6 NeilBrown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1051127233945.14757@suse.de \
--to=neilb@suse.de \
--cc=akpm@osdl.org \
--cc=linux-raid@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).