From: NeilBrown <neilb@suse.de>
To: Andrew Morton <akpm@osdl.org>
Cc: linux-raid@vger.kernel.org
Subject: [PATCH md 004 of 20] Helper function to match commands written to sysfs files.
Date: Mon, 12 Dec 2005 14:13:35 +1100 [thread overview]
Message-ID: <1051212031335.4946@suse.de> (raw)
In-Reply-To: 20051212135705.4561.patches@notabene
Commands written to sysfs files may, or my not, be \n terminated.
We want to accept with case. For this we use cmd_match.
Signed-off-by: Neil Brown <neilb@suse.de>
### Diffstat output
./drivers/md/md.c | 29 ++++++++++++++++++++++++-----
1 file changed, 24 insertions(+), 5 deletions(-)
diff ./drivers/md/md.c~current~ ./drivers/md/md.c
--- ./drivers/md/md.c~current~ 2005-12-12 10:45:16.000000000 +1100
+++ ./drivers/md/md.c 2005-12-12 10:45:30.000000000 +1100
@@ -1525,6 +1525,26 @@ repeat:
}
+/* words written to sysfs files may, or my not, be \n terminated.
+ * We want to accept with case. For this we use cmd_match.
+ */
+static int cmd_match(const char *cmd, const char *str)
+{
+ /* See if cmd, written into a sysfs file, matches
+ * str. They must either be the same, or cmd can
+ * have a trailing newline
+ */
+ while (*cmd && *str && *cmd == *str) {
+ cmd++;
+ str++;
+ }
+ if (*cmd == '\n')
+ cmd++;
+ if (*str || *cmd)
+ return 0;
+ return 1;
+}
+
struct rdev_sysfs_entry {
struct attribute attr;
ssize_t (*show)(mdk_rdev_t *, char *);
@@ -1799,7 +1819,7 @@ action_store(mddev_t *mddev, const char
if (!mddev->pers || !mddev->pers->sync_request)
return -EINVAL;
- if (strcmp(page, "idle")==0 || strcmp(page, "idle\n")==0) {
+ if (cmd_match(page, "idle")) {
if (mddev->sync_thread) {
set_bit(MD_RECOVERY_INTR, &mddev->recovery);
md_unregister_thread(mddev->sync_thread);
@@ -1812,13 +1832,12 @@ action_store(mddev_t *mddev, const char
if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery) ||
test_bit(MD_RECOVERY_NEEDED, &mddev->recovery))
return -EBUSY;
- if (strcmp(page, "resync")==0 || strcmp(page, "resync\n")==0 ||
- strcmp(page, "recover")==0 || strcmp(page, "recover\n")==0)
+ if (cmd_match(page, "resync") || cmd_match(page, "recover"))
set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
else {
- if (strcmp(page, "check")==0 || strcmp(page, "check\n")==0)
+ if (cmd_match(page, "check"))
set_bit(MD_RECOVERY_CHECK, &mddev->recovery);
- else if (strcmp(page, "repair")!=0 && strcmp(page, "repair\n")!=0)
+ else if (cmd_match(page, "repair"))
return -EINVAL;
set_bit(MD_RECOVERY_REQUESTED, &mddev->recovery);
set_bit(MD_RECOVERY_SYNC, &mddev->recovery);
next prev parent reply other threads:[~2005-12-12 3:13 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-12-12 3:10 [PATCH md 000 of 20] Introduction NeilBrown
2005-12-12 3:10 ` [PATCH md 001 of 20] Fix a use-after-free bug in raid1 NeilBrown
2005-12-12 3:10 ` [PATCH md 003 of 20] Define and use safe_put_page for md NeilBrown
2005-12-12 3:10 ` [PATCH md 002 of 20] Use correct size of raid5 stripe cache when measuring how full it is NeilBrown
2005-12-12 3:13 ` NeilBrown [this message]
2005-12-12 3:14 ` [PATCH md 005 of 20] Fix typo in comment NeilBrown
2005-12-12 3:14 ` [PATCH md 006 of 20] Make a couple of names in md.c static NeilBrown
2005-12-12 3:14 ` [PATCH md 007 of 20] Make sure bitmap updates are visible through filesystem NeilBrown
2005-12-12 3:14 ` [PATCH md 008 of 20] Fix rdev->pending counts in raid1 NeilBrown
2005-12-12 3:14 ` [PATCH md 009 of 20] Allow chunk_size to be settable through sysfs NeilBrown
2005-12-12 3:15 ` [PATCH md 010 of 20] Allow md array component size to be accessed and set via sysfs NeilBrown
2005-12-12 3:15 ` [PATCH md 011 of 20] Expose md metadata format in sysfs NeilBrown
2005-12-12 3:15 ` [PATCH md 012 of 20] Allow array level to be set textually via sysfs NeilBrown
2005-12-12 3:15 ` [PATCH md 013 of 20] Count corrected read errors per drive NeilBrown
2005-12-12 10:07 ` Andrew Morton
2005-12-12 3:15 ` [PATCH md 014 of 20] Allow md/raid_disks to be settable NeilBrown
2005-12-12 3:15 ` [PATCH md 015 of 20] Keep better track of dev/array size when assembling md arrays NeilBrown
2005-12-12 3:15 ` [PATCH md 016 of 20] Expose device slot information via sysfs NeilBrown
2005-12-12 3:15 ` [PATCH md 017 of 20] Export rdev->data_offset " NeilBrown
2005-12-12 3:15 ` [PATCH md 018 of 20] Allow available size of component devices to be set " NeilBrown
2005-12-12 3:15 ` [PATCH md 019 of 20] Support adding new devices to md arrays " NeilBrown
2005-12-12 3:15 ` [PATCH md 020 of 20] Allow sync-speed to be controlled per-device NeilBrown
2005-12-12 11:30 ` Jeff Breidenbach
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1051212031335.4946@suse.de \
--to=neilb@suse.de \
--cc=akpm@osdl.org \
--cc=linux-raid@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).