linux-raid.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: NeilBrown <neilb@suse.de>
To: Andrew Morton <akpm@osdl.org>
Cc: linux-raid@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 003 of 4] md: Misc fixes for aligned-read handling.
Date: Tue, 14 Nov 2006 11:22:41 +1100	[thread overview]
Message-ID: <1061114002241.31180@suse.de> (raw)
In-Reply-To: 20061114111600.31061.patches@notabene


1/ When aligned requests fail (read error) they need to be retried 
   via the normal method (stripe cache).  As we cannot be sure that
   we can process a single read in one go (we may not be able to
   allocate all the stripes needed) we store a bio-being-retried
   and a list of bioes-that-still-need-to-be-retried.
   When find a bio that needs to be retried, we should add it to 
   the list, not to single-bio...

2/ The cloned bio is being used-after-free (to test BIO_UPTODATE).

3/ We forgot to add rdev->data_offset when submitting
   a bio for aligned-read
4/ clone_bio calls blk_recount_segments and then we change bi_bdev,
   so we need to invalidate the segment counts.

5/ We were never incrementing 'scnt' when resubmitting failed
   aligned requests.

Signed-off-by: Neil Brown <neilb@suse.de>

### Diffstat output
 ./drivers/md/raid5.c |   14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

diff .prev/drivers/md/raid5.c ./drivers/md/raid5.c
--- .prev/drivers/md/raid5.c	2006-11-14 10:34:17.000000000 +1100
+++ ./drivers/md/raid5.c	2006-11-14 10:34:33.000000000 +1100
@@ -2658,8 +2658,8 @@ static void add_bio_to_retry(struct bio 
 
 	spin_lock_irqsave(&conf->device_lock, flags);
 
-	bi->bi_next = conf->retry_read_aligned;
-	conf->retry_read_aligned = bi;
+	bi->bi_next = conf->retry_read_aligned_list;
+	conf->retry_read_aligned_list = bi;
 
 	spin_unlock_irqrestore(&conf->device_lock, flags);
 	md_wakeup_thread(conf->mddev->thread);
@@ -2698,6 +2698,7 @@ static int raid5_align_endio(struct bio 
 	struct bio* raid_bi  = bi->bi_private;
 	mddev_t *mddev;
 	raid5_conf_t *conf;
+	int uptodate = test_bit(BIO_UPTODATE, &bi->bi_flags);
 
 	if (bi->bi_size)
 		return 1;
@@ -2706,7 +2707,7 @@ static int raid5_align_endio(struct bio 
 	mddev = raid_bi->bi_bdev->bd_disk->queue->queuedata;
 	conf = mddev_to_conf(mddev);
 
-	if (!error && test_bit(BIO_UPTODATE, &bi->bi_flags)) {
+	if (!error && uptodate) {
 		bio_endio(raid_bi, bytes, 0);
 		if (atomic_dec_and_test(&conf->active_aligned_reads))
 			wake_up(&conf->wait_for_stripe);
@@ -2759,9 +2760,11 @@ static int chunk_aligned_read(request_qu
 	rcu_read_lock();
 	rdev = rcu_dereference(conf->disks[dd_idx].rdev);
 	if (rdev && test_bit(In_sync, &rdev->flags)) {
-		align_bi->bi_bdev =  rdev->bdev;
 		atomic_inc(&rdev->nr_pending);
 		rcu_read_unlock();
+		align_bi->bi_bdev =  rdev->bdev;
+		align_bi->bi_flags &= ~(1 << BIO_SEG_VALID);
+		align_bi->bi_sector += rdev->data_offset;
 
 		spin_lock_irq(&conf->device_lock);
 		wait_event_lock_irq(conf->wait_for_stripe,
@@ -3151,7 +3154,8 @@ static int  retry_aligned_read(raid5_con
 					conf);
 	last_sector = raid_bio->bi_sector + (raid_bio->bi_size>>9);
 
-	for (; logical_sector < last_sector; logical_sector += STRIPE_SECTORS) {
+	for (; logical_sector < last_sector;
+	     logical_sector += STRIPE_SECTORS, scnt++) {
 
 		if (scnt < raid_bio->bi_hw_segments)
 			/* already done this stripe */

  parent reply	other threads:[~2006-11-14  0:22 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2006-11-14  0:22 [PATCH 000 of 4] md: Various fixes for new cache-bypassing-reads in raid5/6 NeilBrown
2006-11-14  0:22 ` [PATCH 001 of 4] md: Fix innocuous bug in raid6 stripe_to_pdidx NeilBrown
2006-11-14  0:22 ` [PATCH 002 of 4] md: Fix newly introduced read-corruption with raid6 NeilBrown
2006-11-14  0:22 ` NeilBrown [this message]
2006-11-14  0:22 ` [PATCH 004 of 4] md: Fix a couple more bugs in raid5/6 aligned reads NeilBrown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1061114002241.31180@suse.de \
    --to=neilb@suse.de \
    --cc=akpm@osdl.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-raid@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).