From: NeilBrown <neilb@suse.de>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-raid@vger.kernel.org, linux-kernel@vger.kernel.org,
Neil Brown <neilb@suse.de>
Subject: [PATCH 001 of 5] md: Move test for whether level supports bitmap to correct place.
Date: Tue, 8 May 2007 14:29:17 +1000 [thread overview]
Message-ID: <1070508042917.28734@suse.de> (raw)
In-Reply-To: 20070508142718.28571.patches@notabene
We need to check for internal-consistency of superblock in
load_super. validate_super is for inter-device consistency.
With the test in the wrong place, a badly created array will confuse md
rather an produce sensible errors.
Signed-off-by: Neil Brown <neilb@suse.de>
### Diffstat output
./drivers/md/md.c | 42 ++++++++++++++++++++++++++----------------
1 file changed, 26 insertions(+), 16 deletions(-)
diff .prev/drivers/md/md.c ./drivers/md/md.c
--- .prev/drivers/md/md.c 2007-05-07 14:33:31.000000000 +1000
+++ ./drivers/md/md.c 2007-05-07 14:33:31.000000000 +1000
@@ -695,6 +695,17 @@ static int super_90_load(mdk_rdev_t *rde
rdev->data_offset = 0;
rdev->sb_size = MD_SB_BYTES;
+ if (sb->state & (1<<MD_SB_BITMAP_PRESENT)) {
+ if (sb->level != 1 && sb->level != 4
+ && sb->level != 5 && sb->level != 6
+ && sb->level != 10) {
+ /* FIXME use a better test */
+ printk(KERN_WARNING
+ "md: bitmaps not supported for this level.\n");
+ goto abort;
+ }
+ }
+
if (sb->level == LEVEL_MULTIPATH)
rdev->desc_nr = -1;
else
@@ -793,16 +804,8 @@ static int super_90_validate(mddev_t *md
mddev->max_disks = MD_SB_DISKS;
if (sb->state & (1<<MD_SB_BITMAP_PRESENT) &&
- mddev->bitmap_file == NULL) {
- if (mddev->level != 1 && mddev->level != 4
- && mddev->level != 5 && mddev->level != 6
- && mddev->level != 10) {
- /* FIXME use a better test */
- printk(KERN_WARNING "md: bitmaps not supported for this level.\n");
- return -EINVAL;
- }
+ mddev->bitmap_file == NULL)
mddev->bitmap_offset = mddev->default_bitmap_offset;
- }
} else if (mddev->pers == NULL) {
/* Insist on good event counter while assembling */
@@ -1059,6 +1062,18 @@ static int super_1_load(mdk_rdev_t *rdev
bdevname(rdev->bdev,b));
return -EINVAL;
}
+ if ((le32_to_cpu(sb->feature_map) & MD_FEATURE_BITMAP_OFFSET)) {
+ if (sb->level != cpu_to_le32(1) &&
+ sb->level != cpu_to_le32(4) &&
+ sb->level != cpu_to_le32(5) &&
+ sb->level != cpu_to_le32(6) &&
+ sb->level != cpu_to_le32(10)) {
+ printk(KERN_WARNING
+ "md: bitmaps not supported for this level.\n");
+ return -EINVAL;
+ }
+ }
+
rdev->preferred_minor = 0xffff;
rdev->data_offset = le64_to_cpu(sb->data_offset);
atomic_set(&rdev->corrected_errors, le32_to_cpu(sb->cnt_corrected_read));
@@ -1142,14 +1157,9 @@ static int super_1_validate(mddev_t *mdd
mddev->max_disks = (4096-256)/2;
if ((le32_to_cpu(sb->feature_map) & MD_FEATURE_BITMAP_OFFSET) &&
- mddev->bitmap_file == NULL ) {
- if (mddev->level != 1 && mddev->level != 5 && mddev->level != 6
- && mddev->level != 10) {
- printk(KERN_WARNING "md: bitmaps not supported for this level.\n");
- return -EINVAL;
- }
+ mddev->bitmap_file == NULL )
mddev->bitmap_offset = (__s32)le32_to_cpu(sb->bitmap_offset);
- }
+
if ((le32_to_cpu(sb->feature_map) & MD_FEATURE_RESHAPE_ACTIVE)) {
mddev->reshape_position = le64_to_cpu(sb->reshape_position);
mddev->delta_disks = le32_to_cpu(sb->delta_disks);
next prev parent reply other threads:[~2007-05-08 4:29 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2007-05-08 4:29 [PATCH 000 of 5] md: assorted bug fixes and minor features NeilBrown
2007-05-08 4:29 ` NeilBrown [this message]
2007-05-08 4:29 ` [PATCH 002 of 5] md: Stop using csum_partial for checksum calculation in md NeilBrown
2007-05-08 4:29 ` [PATCH 003 of 5] md: Remove the slash from the name of a kmem_cache used by raid5 NeilBrown
2007-05-08 4:29 ` [PATCH 004 of 5] md: Allow reshape_position for md arrays to be set via sysfs NeilBrown
2007-05-08 4:29 ` [PATCH 005 of 5] md: Improve partition detection in md array NeilBrown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1070508042917.28734@suse.de \
--to=neilb@suse.de \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-raid@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).