From: NeilBrown <neilb@suse.de>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-raid@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 011 of 29] md: Support adding a spare to a live md array with external metadata.
Date: Fri, 27 Jun 2008 16:50:29 +1000 [thread overview]
Message-ID: <1080627065029.10473@suse.de> (raw)
In-Reply-To: 20080627164503.9671.patches@notabene
i.e. extend the 'md/dev-XXX/slot' attribute so that you can
tell a device to fill an vacant slot in an and md array.
Signed-off-by: Neil Brown <neilb@suse.de>
### Diffstat output
./drivers/md/md.c | 42 +++++++++++++++++++++++++++++++++++++++---
./drivers/md/multipath.c | 7 ++++++-
./drivers/md/raid1.c | 7 ++++++-
./drivers/md/raid10.c | 10 ++++++++--
./drivers/md/raid5.c | 10 ++++++++--
5 files changed, 67 insertions(+), 9 deletions(-)
diff .prev/drivers/md/md.c ./drivers/md/md.c
--- .prev/drivers/md/md.c 2008-06-27 15:33:01.000000000 +1000
+++ ./drivers/md/md.c 2008-06-27 15:33:01.000000000 +1000
@@ -1932,7 +1932,7 @@ slot_store(mdk_rdev_t *rdev, const char
slot = -1;
else if (e==buf || (*e && *e!= '\n'))
return -EINVAL;
- if (rdev->mddev->pers) {
+ if (rdev->mddev->pers && slot == -1) {
/* Setting 'slot' on an active array requires also
* updating the 'rd%d' link, and communicating
* with the personality with ->hot_*_disk.
@@ -1940,8 +1940,6 @@ slot_store(mdk_rdev_t *rdev, const char
* failed/spare devices. This normally happens automatically,
* but not when the metadata is externally managed.
*/
- if (slot != -1)
- return -EBUSY;
if (rdev->raid_disk == -1)
return -EEXIST;
/* personality does all needed checks */
@@ -1955,6 +1953,44 @@ slot_store(mdk_rdev_t *rdev, const char
sysfs_remove_link(&rdev->mddev->kobj, nm);
set_bit(MD_RECOVERY_NEEDED, &rdev->mddev->recovery);
md_wakeup_thread(rdev->mddev->thread);
+ } else if (rdev->mddev->pers) {
+ mdk_rdev_t *rdev2;
+ struct list_head *tmp;
+ /* Activating a spare .. or possibly reactivating
+ * if we every get bitmaps working here.
+ */
+
+ if (rdev->raid_disk != -1)
+ return -EBUSY;
+
+ if (rdev->mddev->pers->hot_add_disk == NULL)
+ return -EINVAL;
+
+ rdev_for_each(rdev2, tmp, rdev->mddev)
+ if (rdev2->raid_disk == slot)
+ return -EEXIST;
+
+ rdev->raid_disk = slot;
+ if (test_bit(In_sync, &rdev->flags))
+ rdev->saved_raid_disk = slot;
+ else
+ rdev->saved_raid_disk = -1;
+ err = rdev->mddev->pers->
+ hot_add_disk(rdev->mddev, rdev);
+ if (err != 1) {
+ rdev->raid_disk = -1;
+ if (err == 0)
+ return -EEXIST;
+ return err;
+ }
+ sprintf(nm, "rd%d", rdev->raid_disk);
+ if (sysfs_create_link(&rdev->mddev->kobj, &rdev->kobj, nm))
+ printk(KERN_WARNING
+ "md: cannot register "
+ "%s for %s\n",
+ nm, mdname(rdev->mddev));
+
+ /* don't wakeup anyone, leave that to userspace. */
} else {
if (slot >= rdev->mddev->raid_disks)
return -ENOSPC;
diff .prev/drivers/md/multipath.c ./drivers/md/multipath.c
--- .prev/drivers/md/multipath.c 2008-06-27 15:14:03.000000000 +1000
+++ ./drivers/md/multipath.c 2008-06-27 15:33:01.000000000 +1000
@@ -284,10 +284,15 @@ static int multipath_add_disk(mddev_t *m
int found = 0;
int path;
struct multipath_info *p;
+ int first = 0;
+ int last = mddev->raid_disks - 1;
+
+ if (rdev->raid_disk >= 0)
+ first = last = rdev->raid_disk;
print_multipath_conf(conf);
- for (path=0; path<mddev->raid_disks; path++)
+ for (path = first; path <= last; path++)
if ((p=conf->multipaths+path)->rdev == NULL) {
q = rdev->bdev->bd_disk->queue;
blk_queue_stack_limits(mddev->queue, q);
diff .prev/drivers/md/raid10.c ./drivers/md/raid10.c
--- .prev/drivers/md/raid10.c 2008-06-27 15:19:36.000000000 +1000
+++ ./drivers/md/raid10.c 2008-06-27 15:33:01.000000000 +1000
@@ -1116,6 +1116,8 @@ static int raid10_add_disk(mddev_t *mdde
int found = 0;
int mirror;
mirror_info_t *p;
+ int first = 0;
+ int last = mddev->raid_disks - 1;
if (mddev->recovery_cp < MaxSector)
/* only hot-add to in-sync arrays, as recovery is
@@ -1125,12 +1127,16 @@ static int raid10_add_disk(mddev_t *mdde
if (!enough(conf))
return 0;
+ if (rdev->raid_disk)
+ first = last = rdev->raid_disk;
+
if (rdev->saved_raid_disk >= 0 &&
+ rdev->saved_raid_disk >= first &&
conf->mirrors[rdev->saved_raid_disk].rdev == NULL)
mirror = rdev->saved_raid_disk;
else
- mirror = 0;
- for ( ; mirror < mddev->raid_disks; mirror++)
+ mirror = first;
+ for ( ; mirror <= last ; mirror++)
if ( !(p=conf->mirrors+mirror)->rdev) {
blk_queue_stack_limits(mddev->queue,
diff .prev/drivers/md/raid1.c ./drivers/md/raid1.c
--- .prev/drivers/md/raid1.c 2008-06-27 15:14:03.000000000 +1000
+++ ./drivers/md/raid1.c 2008-06-27 15:33:01.000000000 +1000
@@ -1103,8 +1103,13 @@ static int raid1_add_disk(mddev_t *mddev
int found = 0;
int mirror = 0;
mirror_info_t *p;
+ int first = 0;
+ int last = mddev->raid_disks - 1;
- for (mirror=0; mirror < mddev->raid_disks; mirror++)
+ if (rdev->raid_disk >= 0)
+ first = last = rdev->raid_disk;
+
+ for (mirror = first; mirror <= last; mirror++)
if ( !(p=conf->mirrors+mirror)->rdev) {
blk_queue_stack_limits(mddev->queue,
diff .prev/drivers/md/raid5.c ./drivers/md/raid5.c
--- .prev/drivers/md/raid5.c 2008-06-27 15:31:23.000000000 +1000
+++ ./drivers/md/raid5.c 2008-06-27 15:33:01.000000000 +1000
@@ -4607,21 +4607,27 @@ static int raid5_add_disk(mddev_t *mddev
int found = 0;
int disk;
struct disk_info *p;
+ int first = 0;
+ int last = conf->raid_disks - 1;
if (mddev->degraded > conf->max_degraded)
/* no point adding a device */
return 0;
+ if (rdev->raid_disk >= 0)
+ first = last = rdev->raid_disk;
+
/*
* find the disk ... but prefer rdev->saved_raid_disk
* if possible.
*/
if (rdev->saved_raid_disk >= 0 &&
+ rdev->saved_raid_disk >= first &&
conf->disks[rdev->saved_raid_disk].rdev == NULL)
disk = rdev->saved_raid_disk;
else
- disk = 0;
- for ( ; disk < conf->raid_disks; disk++)
+ disk = first;
+ for ( ; disk <= last ; disk++)
if ((p=conf->disks + disk)->rdev == NULL) {
clear_bit(In_sync, &rdev->flags);
rdev->raid_disk = disk;
next prev parent reply other threads:[~2008-06-27 6:50 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-27 6:49 [PATCH 000 of 29] md: Introduction : patchbomb for 2.6.27 merge window NeilBrown
2008-06-27 6:49 ` [PATCH 001 of 29] md: Ensure interrupted recovery completed properly (v1 metadata plus bitmap) NeilBrown
2008-07-01 7:20 ` Jan Engelhardt
2008-06-27 6:49 ` [PATCH 002 of 29] md: Don't acknowlege that stripe-expand is complete until it really is NeilBrown
2008-06-27 6:49 ` [PATCH 003 of 29] md: Fix error paths if md_probe fails NeilBrown
2008-06-27 6:49 ` [PATCH 004 of 29] md: linear: correct disk numbering error check NeilBrown
2008-06-27 6:49 ` [PATCH 005 of 29] md: use bio_endio instead of a call to bi_end_io NeilBrown
2008-06-27 6:49 ` [PATCH 006 of 29] md: Improve setting of "events_cleared" for write-intent bitmaps NeilBrown
2008-06-27 6:50 ` [PATCH 007 of 29] md: Allow setting start point for requested check/repair NeilBrown
2008-06-27 6:50 ` [PATCH 008 of 29] md: Close race in md_probe NeilBrown
2008-06-27 12:21 ` Andre Noll
2008-06-27 23:38 ` Neil Brown
2008-06-30 7:52 ` Andre Noll
2008-06-27 6:50 ` [PATCH 009 of 29] md: Don't try to make md arrays dirty if that is not meaningful NeilBrown
2008-06-27 6:50 ` [PATCH 010 of 29] md: Enable setting of 'offset' and 'size' of a hot-added spare NeilBrown
2008-06-27 6:50 ` NeilBrown [this message]
2008-06-27 6:50 ` [PATCH 012 of 29] md: rationalise return value for ->hot_add_disk method NeilBrown
2008-06-27 6:50 ` [PATCH 013 of 29] md: Don't reject HOT_REMOVE_DISK request for an array that is not yet started NeilBrown
2008-06-27 6:50 ` [PATCH 014 of 29] md: Make sure all changes to md/array_state are notified NeilBrown
2008-06-27 6:50 ` [PATCH 015 of 29] md: Make sure all changes to md/sync_action " NeilBrown
2008-06-27 6:51 ` [PATCH 016 of 29] md: Make sure all changes to md/degraded " NeilBrown
2008-06-27 6:51 ` [PATCH 017 of 29] md: Make sure all changes to md/dev-XX/state " NeilBrown
2008-06-27 6:51 ` [PATCH 018 of 29] md: Support changing rdev size on running arrays NeilBrown
2008-06-27 16:09 ` Markus Hochholdinger
2008-06-27 23:41 ` Neil Brown
2010-03-30 14:52 ` Markus Hochholdinger
2010-03-31 5:41 ` Neil Brown
2010-04-01 15:23 ` Markus Hochholdinger
2012-03-24 20:47 ` Markus Hochholdinger
2012-03-25 22:15 ` NeilBrown
2021-11-10 13:09 ` Markus Hochholdinger
2021-11-10 17:51 ` Markus Hochholdinger
2021-11-11 13:10 ` Markus Hochholdinger
2021-11-11 15:09 ` Markus Hochholdinger
2021-11-12 1:22 ` Guoqing Jiang
2021-11-12 14:31 ` Markus Hochholdinger
2008-06-27 6:51 ` [PATCH 019 of 29] md: md: kill STRIPE_OP_MOD_DMA in raid5 offload NeilBrown
2008-06-27 6:51 ` [PATCH 020 of 29] md: md: kill STRIPE_OP_IO flag NeilBrown
2008-06-27 6:51 ` [PATCH 021 of 29] md: md: use stripe_head_state in ops_run_io() NeilBrown
2008-06-27 6:51 ` [PATCH 022 of 29] md: md: unify raid5/6 i/o submission NeilBrown
2008-06-27 6:51 ` [PATCH 023 of 29] md: md: replace STRIPE_OP_CHECK with 'check_states' NeilBrown
2008-06-27 6:51 ` [PATCH 024 of 29] md: md: replace STRIPE_OP_BIOFILL with STRIPE_BIOFILL_RUN NeilBrown
2008-06-27 6:52 ` [PATCH 025 of 29] md: md: replace STRIPE_OP_COMPUTE_BLK with STRIPE_COMPUTE_RUN NeilBrown
2008-06-27 6:52 ` [PATCH 026 of 29] md: md: replace STRIPE_OP_{BIODRAIN,PREXOR,POSTXOR} with 'reconstruct_states' NeilBrown
2008-06-27 6:52 ` [PATCH 027 of 29] md: md: replace R5_WantPrexor with R5_WantDrain, add 'prexor' reconstruct_states NeilBrown
2008-06-27 6:52 ` [PATCH 028 of 29] md: md: handle operation chaining in raid5_run_ops NeilBrown
2008-06-27 6:52 ` [PATCH 029 of 29] md: md: rationalize raid5 function names NeilBrown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1080627065029.10473@suse.de \
--to=neilb@suse.de \
--cc=akpm@linux-foundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-raid@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).