linux-raid.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: NeilBrown <neilb@suse.de>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-raid@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH 017 of 29] md: Make sure all changes to md/dev-XX/state are notified
Date: Fri, 27 Jun 2008 16:51:10 +1000	[thread overview]
Message-ID: <1080627065110.10579@suse.de> (raw)
In-Reply-To: 20080627164503.9671.patches@notabene


The important state change happens during an interrupt
in md_error.  So just set a flag there and call sysfs_notify
later in process context.

Signed-off-by: Neil Brown <neilb@suse.de>

### Diffstat output
 ./Documentation/md.txt      |   10 ++++++++++
 ./drivers/md/md.c           |   14 +++++++++++++-
 ./include/linux/raid/md_k.h |    3 +++
 3 files changed, 26 insertions(+), 1 deletion(-)

diff .prev/Documentation/md.txt ./Documentation/md.txt
--- .prev/Documentation/md.txt	2008-06-27 16:22:02.000000000 +1000
+++ ./Documentation/md.txt	2008-06-27 16:22:03.000000000 +1000
@@ -297,6 +297,10 @@ Each directory contains:
 	      writemostly - device will only be subject to read
 		         requests if there are no other options.
 			 This applies only to raid1 arrays.
+	      blocked  - device has failed, metadata is "external",
+	                 and the failure hasn't been acknowledged yet.
+			 Writes that would write to this device if
+			 it were not faulty are blocked.
 	      spare    - device is working, but not a full member.
 			 This includes spares that are in the process
 			 of being recovered to
@@ -306,6 +310,12 @@ Each directory contains:
 	Writing "remove" removes the device from the array.
 	Writing "writemostly" sets the writemostly flag.
 	Writing "-writemostly" clears the writemostly flag.
+	Writing "blocked" sets the "blocked" flag.
+	Writing "-blocked" clear the "blocked" flag and allows writes
+		to complete.
+
+	This file responds to select/poll. Any change to 'faulty'
+	or 'blocked' causes an event.
 
       errors
 	An approximate count of read errors that have been detected on

diff .prev/drivers/md/md.c ./drivers/md/md.c
--- .prev/drivers/md/md.c	2008-06-27 16:22:02.000000000 +1000
+++ ./drivers/md/md.c	2008-06-27 16:22:03.000000000 +1000
@@ -1886,6 +1886,8 @@ state_store(mdk_rdev_t *rdev, const char
 
 		err = 0;
 	}
+	if (!err)
+		sysfs_notify(&rdev->kobj, NULL, "state");
 	return err ? err : len;
 }
 static struct rdev_sysfs_entry rdev_state =
@@ -1979,7 +1981,8 @@ slot_store(mdk_rdev_t *rdev, const char 
 		if (err) {
 			rdev->raid_disk = -1;
 			return err;
-		}
+		} else
+			sysfs_notify(&rdev->kobj, NULL, "state");
 		sprintf(nm, "rd%d", rdev->raid_disk);
 		if (sysfs_create_link(&rdev->mddev->kobj, &rdev->kobj, nm))
 			printk(KERN_WARNING
@@ -1996,6 +1999,7 @@ slot_store(mdk_rdev_t *rdev, const char 
 		clear_bit(Faulty, &rdev->flags);
 		clear_bit(WriteMostly, &rdev->flags);
 		set_bit(In_sync, &rdev->flags);
+		sysfs_notify(&rdev->kobj, NULL, "state");
 	}
 	return len;
 }
@@ -3525,6 +3529,7 @@ static int do_md_run(mddev_t * mddev)
 				return -EINVAL;
 			}
 		}
+		sysfs_notify(&rdev->kobj, NULL, "state");
 	}
 
 	md_probe(mddev->unit, NULL, NULL);
@@ -4256,6 +4261,8 @@ static int add_new_disk(mddev_t * mddev,
 		}
 		if (err)
 			export_rdev(rdev);
+		else
+			sysfs_notify(&rdev->kobj, NULL, "state");
 
 		md_update_sb(mddev, 1);
 		if (mddev->degraded)
@@ -5115,6 +5122,7 @@ void md_error(mddev_t *mddev, mdk_rdev_t
 	mddev->pers->error_handler(mddev,rdev);
 	if (mddev->degraded)
 		set_bit(MD_RECOVERY_RECOVER, &mddev->recovery);
+	set_bit(StateChanged, &rdev->flags);
 	set_bit(MD_RECOVERY_INTR, &mddev->recovery);
 	set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
 	md_wakeup_thread(mddev->thread);
@@ -6037,6 +6045,10 @@ void md_check_recovery(mddev_t *mddev)
 		if (mddev->flags)
 			md_update_sb(mddev, 0);
 
+		rdev_for_each(rdev, rtmp, mddev)
+			if (test_and_clear_bit(StateChanged, &rdev->flags))
+				sysfs_notify(&rdev->kobj, NULL, "state");
+
 
 		if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery) &&
 		    !test_bit(MD_RECOVERY_DONE, &mddev->recovery)) {

diff .prev/include/linux/raid/md_k.h ./include/linux/raid/md_k.h
--- .prev/include/linux/raid/md_k.h	2008-06-27 16:22:02.000000000 +1000
+++ ./include/linux/raid/md_k.h	2008-06-27 16:22:03.000000000 +1000
@@ -87,6 +87,9 @@ struct mdk_rdev_s
 #define Blocked		8		/* An error occured on an externally
 					 * managed array, don't allow writes
 					 * until it is cleared */
+#define StateChanged	9		/* Faulty or Blocked has changed during
+					 * interrupt, so it needs to be
+					 * notified by the thread */
 	wait_queue_head_t blocked_wait;
 
 	int desc_nr;			/* descriptor index in the superblock */

  parent reply	other threads:[~2008-06-27  6:51 UTC|newest]

Thread overview: 47+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-06-27  6:49 [PATCH 000 of 29] md: Introduction : patchbomb for 2.6.27 merge window NeilBrown
2008-06-27  6:49 ` [PATCH 001 of 29] md: Ensure interrupted recovery completed properly (v1 metadata plus bitmap) NeilBrown
2008-07-01  7:20   ` Jan Engelhardt
2008-06-27  6:49 ` [PATCH 002 of 29] md: Don't acknowlege that stripe-expand is complete until it really is NeilBrown
2008-06-27  6:49 ` [PATCH 003 of 29] md: Fix error paths if md_probe fails NeilBrown
2008-06-27  6:49 ` [PATCH 004 of 29] md: linear: correct disk numbering error check NeilBrown
2008-06-27  6:49 ` [PATCH 005 of 29] md: use bio_endio instead of a call to bi_end_io NeilBrown
2008-06-27  6:49 ` [PATCH 006 of 29] md: Improve setting of "events_cleared" for write-intent bitmaps NeilBrown
2008-06-27  6:50 ` [PATCH 007 of 29] md: Allow setting start point for requested check/repair NeilBrown
2008-06-27  6:50 ` [PATCH 008 of 29] md: Close race in md_probe NeilBrown
2008-06-27 12:21   ` Andre Noll
2008-06-27 23:38     ` Neil Brown
2008-06-30  7:52       ` Andre Noll
2008-06-27  6:50 ` [PATCH 009 of 29] md: Don't try to make md arrays dirty if that is not meaningful NeilBrown
2008-06-27  6:50 ` [PATCH 010 of 29] md: Enable setting of 'offset' and 'size' of a hot-added spare NeilBrown
2008-06-27  6:50 ` [PATCH 011 of 29] md: Support adding a spare to a live md array with external metadata NeilBrown
2008-06-27  6:50 ` [PATCH 012 of 29] md: rationalise return value for ->hot_add_disk method NeilBrown
2008-06-27  6:50 ` [PATCH 013 of 29] md: Don't reject HOT_REMOVE_DISK request for an array that is not yet started NeilBrown
2008-06-27  6:50 ` [PATCH 014 of 29] md: Make sure all changes to md/array_state are notified NeilBrown
2008-06-27  6:50 ` [PATCH 015 of 29] md: Make sure all changes to md/sync_action " NeilBrown
2008-06-27  6:51 ` [PATCH 016 of 29] md: Make sure all changes to md/degraded " NeilBrown
2008-06-27  6:51 ` NeilBrown [this message]
2008-06-27  6:51 ` [PATCH 018 of 29] md: Support changing rdev size on running arrays NeilBrown
2008-06-27 16:09   ` Markus Hochholdinger
2008-06-27 23:41     ` Neil Brown
2010-03-30 14:52       ` Markus Hochholdinger
2010-03-31  5:41         ` Neil Brown
2010-04-01 15:23           ` Markus Hochholdinger
2012-03-24 20:47       ` Markus Hochholdinger
2012-03-25 22:15         ` NeilBrown
2021-11-10 13:09         ` Markus Hochholdinger
2021-11-10 17:51           ` Markus Hochholdinger
2021-11-11 13:10             ` Markus Hochholdinger
2021-11-11 15:09               ` Markus Hochholdinger
2021-11-12  1:22                 ` Guoqing Jiang
2021-11-12 14:31                   ` Markus Hochholdinger
2008-06-27  6:51 ` [PATCH 019 of 29] md: md: kill STRIPE_OP_MOD_DMA in raid5 offload NeilBrown
2008-06-27  6:51 ` [PATCH 020 of 29] md: md: kill STRIPE_OP_IO flag NeilBrown
2008-06-27  6:51 ` [PATCH 021 of 29] md: md: use stripe_head_state in ops_run_io() NeilBrown
2008-06-27  6:51 ` [PATCH 022 of 29] md: md: unify raid5/6 i/o submission NeilBrown
2008-06-27  6:51 ` [PATCH 023 of 29] md: md: replace STRIPE_OP_CHECK with 'check_states' NeilBrown
2008-06-27  6:51 ` [PATCH 024 of 29] md: md: replace STRIPE_OP_BIOFILL with STRIPE_BIOFILL_RUN NeilBrown
2008-06-27  6:52 ` [PATCH 025 of 29] md: md: replace STRIPE_OP_COMPUTE_BLK with STRIPE_COMPUTE_RUN NeilBrown
2008-06-27  6:52 ` [PATCH 026 of 29] md: md: replace STRIPE_OP_{BIODRAIN,PREXOR,POSTXOR} with 'reconstruct_states' NeilBrown
2008-06-27  6:52 ` [PATCH 027 of 29] md: md: replace R5_WantPrexor with R5_WantDrain, add 'prexor' reconstruct_states NeilBrown
2008-06-27  6:52 ` [PATCH 028 of 29] md: md: handle operation chaining in raid5_run_ops NeilBrown
2008-06-27  6:52 ` [PATCH 029 of 29] md: md: rationalize raid5 function names NeilBrown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1080627065110.10579@suse.de \
    --to=neilb@suse.de \
    --cc=akpm@linux-foundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-raid@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).