From: NeilBrown <neilb@suse.de>
To: Andrew Morton <akpm@linux-foundation.org>
Cc: linux-raid@vger.kernel.org, linux-kernel@vger.kernel.org,
Dan Williams <dan.j.williams@intel.com>
Subject: [PATCH 022 of 29] md: md: unify raid5/6 i/o submission
Date: Fri, 27 Jun 2008 16:51:43 +1000 [thread overview]
Message-ID: <1080627065143.10671@suse.de> (raw)
In-Reply-To: 20080627164503.9671.patches@notabene
From: Dan Williams <dan.j.williams@intel.com>
Let the raid6 path call ops_run_io to get pending i/o submitted.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Neil Brown <neilb@suse.de>
### Diffstat output
./drivers/md/raid5.c | 63 +--------------------------------------------------
1 file changed, 2 insertions(+), 61 deletions(-)
diff .prev/drivers/md/raid5.c ./drivers/md/raid5.c
--- .prev/drivers/md/raid5.c 2008-06-27 16:22:04.000000000 +1000
+++ ./drivers/md/raid5.c 2008-06-27 16:22:05.000000000 +1000
@@ -3114,68 +3114,9 @@ static void handle_stripe6(struct stripe
if (unlikely(blocked_rdev))
md_wait_for_blocked_rdev(blocked_rdev, conf->mddev);
- return_io(return_bi);
-
- for (i=disks; i-- ;) {
- int rw;
- struct bio *bi;
- mdk_rdev_t *rdev;
- if (test_and_clear_bit(R5_Wantwrite, &sh->dev[i].flags))
- rw = WRITE;
- else if (test_and_clear_bit(R5_Wantread, &sh->dev[i].flags))
- rw = READ;
- else
- continue;
-
- set_bit(STRIPE_IO_STARTED, &sh->state);
-
- bi = &sh->dev[i].req;
-
- bi->bi_rw = rw;
- if (rw == WRITE)
- bi->bi_end_io = raid5_end_write_request;
- else
- bi->bi_end_io = raid5_end_read_request;
+ ops_run_io(sh, &s);
- rcu_read_lock();
- rdev = rcu_dereference(conf->disks[i].rdev);
- if (rdev && test_bit(Faulty, &rdev->flags))
- rdev = NULL;
- if (rdev)
- atomic_inc(&rdev->nr_pending);
- rcu_read_unlock();
-
- if (rdev) {
- if (s.syncing || s.expanding || s.expanded)
- md_sync_acct(rdev->bdev, STRIPE_SECTORS);
-
- bi->bi_bdev = rdev->bdev;
- pr_debug("for %llu schedule op %ld on disc %d\n",
- (unsigned long long)sh->sector, bi->bi_rw, i);
- atomic_inc(&sh->count);
- bi->bi_sector = sh->sector + rdev->data_offset;
- bi->bi_flags = 1 << BIO_UPTODATE;
- bi->bi_vcnt = 1;
- bi->bi_max_vecs = 1;
- bi->bi_idx = 0;
- bi->bi_io_vec = &sh->dev[i].vec;
- bi->bi_io_vec[0].bv_len = STRIPE_SIZE;
- bi->bi_io_vec[0].bv_offset = 0;
- bi->bi_size = STRIPE_SIZE;
- bi->bi_next = NULL;
- if (rw == WRITE &&
- test_bit(R5_ReWrite, &sh->dev[i].flags))
- atomic_add(STRIPE_SECTORS, &rdev->corrected_errors);
- generic_make_request(bi);
- } else {
- if (rw == WRITE)
- set_bit(STRIPE_DEGRADED, &sh->state);
- pr_debug("skip op %ld on disc %d for sector %llu\n",
- bi->bi_rw, i, (unsigned long long)sh->sector);
- clear_bit(R5_LOCKED, &sh->dev[i].flags);
- set_bit(STRIPE_HANDLE, &sh->state);
- }
- }
+ return_io(return_bi);
}
static void handle_stripe(struct stripe_head *sh, struct page *tmp_page)
next prev parent reply other threads:[~2008-06-27 6:51 UTC|newest]
Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-06-27 6:49 [PATCH 000 of 29] md: Introduction : patchbomb for 2.6.27 merge window NeilBrown
2008-06-27 6:49 ` [PATCH 001 of 29] md: Ensure interrupted recovery completed properly (v1 metadata plus bitmap) NeilBrown
2008-07-01 7:20 ` Jan Engelhardt
2008-06-27 6:49 ` [PATCH 002 of 29] md: Don't acknowlege that stripe-expand is complete until it really is NeilBrown
2008-06-27 6:49 ` [PATCH 003 of 29] md: Fix error paths if md_probe fails NeilBrown
2008-06-27 6:49 ` [PATCH 004 of 29] md: linear: correct disk numbering error check NeilBrown
2008-06-27 6:49 ` [PATCH 005 of 29] md: use bio_endio instead of a call to bi_end_io NeilBrown
2008-06-27 6:49 ` [PATCH 006 of 29] md: Improve setting of "events_cleared" for write-intent bitmaps NeilBrown
2008-06-27 6:50 ` [PATCH 007 of 29] md: Allow setting start point for requested check/repair NeilBrown
2008-06-27 6:50 ` [PATCH 008 of 29] md: Close race in md_probe NeilBrown
2008-06-27 12:21 ` Andre Noll
2008-06-27 23:38 ` Neil Brown
2008-06-30 7:52 ` Andre Noll
2008-06-27 6:50 ` [PATCH 009 of 29] md: Don't try to make md arrays dirty if that is not meaningful NeilBrown
2008-06-27 6:50 ` [PATCH 010 of 29] md: Enable setting of 'offset' and 'size' of a hot-added spare NeilBrown
2008-06-27 6:50 ` [PATCH 011 of 29] md: Support adding a spare to a live md array with external metadata NeilBrown
2008-06-27 6:50 ` [PATCH 012 of 29] md: rationalise return value for ->hot_add_disk method NeilBrown
2008-06-27 6:50 ` [PATCH 013 of 29] md: Don't reject HOT_REMOVE_DISK request for an array that is not yet started NeilBrown
2008-06-27 6:50 ` [PATCH 014 of 29] md: Make sure all changes to md/array_state are notified NeilBrown
2008-06-27 6:50 ` [PATCH 015 of 29] md: Make sure all changes to md/sync_action " NeilBrown
2008-06-27 6:51 ` [PATCH 016 of 29] md: Make sure all changes to md/degraded " NeilBrown
2008-06-27 6:51 ` [PATCH 017 of 29] md: Make sure all changes to md/dev-XX/state " NeilBrown
2008-06-27 6:51 ` [PATCH 018 of 29] md: Support changing rdev size on running arrays NeilBrown
2008-06-27 16:09 ` Markus Hochholdinger
2008-06-27 23:41 ` Neil Brown
2010-03-30 14:52 ` Markus Hochholdinger
2010-03-31 5:41 ` Neil Brown
2010-04-01 15:23 ` Markus Hochholdinger
2012-03-24 20:47 ` Markus Hochholdinger
2012-03-25 22:15 ` NeilBrown
2021-11-10 13:09 ` Markus Hochholdinger
2021-11-10 17:51 ` Markus Hochholdinger
2021-11-11 13:10 ` Markus Hochholdinger
2021-11-11 15:09 ` Markus Hochholdinger
2021-11-12 1:22 ` Guoqing Jiang
2021-11-12 14:31 ` Markus Hochholdinger
2008-06-27 6:51 ` [PATCH 019 of 29] md: md: kill STRIPE_OP_MOD_DMA in raid5 offload NeilBrown
2008-06-27 6:51 ` [PATCH 020 of 29] md: md: kill STRIPE_OP_IO flag NeilBrown
2008-06-27 6:51 ` [PATCH 021 of 29] md: md: use stripe_head_state in ops_run_io() NeilBrown
2008-06-27 6:51 ` NeilBrown [this message]
2008-06-27 6:51 ` [PATCH 023 of 29] md: md: replace STRIPE_OP_CHECK with 'check_states' NeilBrown
2008-06-27 6:51 ` [PATCH 024 of 29] md: md: replace STRIPE_OP_BIOFILL with STRIPE_BIOFILL_RUN NeilBrown
2008-06-27 6:52 ` [PATCH 025 of 29] md: md: replace STRIPE_OP_COMPUTE_BLK with STRIPE_COMPUTE_RUN NeilBrown
2008-06-27 6:52 ` [PATCH 026 of 29] md: md: replace STRIPE_OP_{BIODRAIN,PREXOR,POSTXOR} with 'reconstruct_states' NeilBrown
2008-06-27 6:52 ` [PATCH 027 of 29] md: md: replace R5_WantPrexor with R5_WantDrain, add 'prexor' reconstruct_states NeilBrown
2008-06-27 6:52 ` [PATCH 028 of 29] md: md: handle operation chaining in raid5_run_ops NeilBrown
2008-06-27 6:52 ` [PATCH 029 of 29] md: md: rationalize raid5 function names NeilBrown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1080627065143.10671@suse.de \
--to=neilb@suse.de \
--cc=akpm@linux-foundation.org \
--cc=dan.j.williams@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-raid@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).