* Add device doesn't stick
@ 2004-03-31 8:26 Ninti Systems
0 siblings, 0 replies; only message in thread
From: Ninti Systems @ 2004-03-31 8:26 UTC (permalink / raw)
To: RAID Linux
Back again ... :-)
So far so good with building RAID1 arrays using the 'missing' device
method on an already installed Slackware 9.1 system.
I've set up the RAID devices, they are autodetected on boot, everything
looks good.
I hotadd the 'missing' device and the two devices sync.
I run 'mdadm --detail /dev/md5' and yep, the full array is now running
with both disks. I can 'ls' the contents etc.
I reboot and ... back to degraded mode with one failed device. The
hotadded device doesn't stick to the RAID device.
I'm sure there is a simple explanation. One system complaint is that the
expected superblock info couldn't be found (something like "expecting
a2hgf64jdk found 00000000").
I'm not sure how to rectify this?
Thanks
Mick
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2004-03-31 8:26 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2004-03-31 8:26 Add device doesn't stick Ninti Systems
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).