From mboxrd@z Thu Jan 1 00:00:00 1970 From: "Scott T. Smith" Subject: RE: 3ware drive hotswapping Date: Mon, 21 Jun 2004 18:20:56 -0700 Sender: linux-raid-owner@vger.kernel.org Message-ID: <1087867256.9264.102.camel@tinny.home.foo> References: Mime-Version: 1.0 Content-Type: text/plain Content-Transfer-Encoding: 7bit Return-path: In-Reply-To: To: Adam Radford Cc: linux-raid@vger.kernel.org List-Id: linux-raid.ids On Mon, 2004-06-21 at 18:17, Adam Radford wrote: > Please make sure that: > > 1. You have support for /proc/scsi turned on in your kernel. yup (cat /proc/scsi/scsi shows lots of stuff, and remove-single-device/add-single-device work for other drives). > 2. You have powered the drive back on after re-insertion. uh..... ummm..... how do I do that? I was told the drives are not programmed to power on when the machine powers on, but instead by the controller in order to prevent a power surge on start (we have 24 disks); though for the life of me I can't figure out where that is set (the Alt-3 screen on startup doesn't seem to show any option regarding that). > 3. You have a 3ware driver >= v1.02.00.032. yup Scott