From: Sebastian Utz <su@rotamente.com>
To: Tim Moore <linux-raid@nsr500.net>
Cc: linux-raid@vger.kernel.org
Subject: Re: Software RAID-5 attempt to access beyond end of device...
Date: Mon, 30 Aug 2004 11:49:41 +0200 [thread overview]
Message-ID: <1093859380.13971.166.camel@slurp> (raw)
Thanks for that!
I haven't have enough time to consider this..
greetings,
sebastian
> Two performance suggestions.
>
> 1. Consider two RAID-1 arrays: hde+hdg (41MB) and hdi+hdk (80MB) which
> would give much better performance over RAID-5 and lower failure
> probability without giving up any storage capacity.
>
> 2. Set the P2B BIOS to have both promise controllers on IRQ 14 which is
> unused in your system (remember to disable the primary motherboard IDE and
> you may have to rearrange PCI slot positions). This will give much better
> interrupt performance than having the controllers sharing USB and mouse
> interrupt cycles.
>
> Rgds,
> tim
next reply other threads:[~2004-08-30 9:49 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2004-08-30 9:49 Sebastian Utz [this message]
-- strict thread matches above, loose matches on Subject: below --
2004-08-27 15:37 Software RAID-5 attempt to access beyond end of device Sebastian Utz
[not found] ` <Pine.LNX.4.56.0408271739470.23465@lion.drogon.net>
2004-08-27 18:20 ` Sebastian Utz
2004-08-29 18:27 ` Tim Moore
2004-08-30 6:27 ` Neil Brown
2004-08-30 9:40 ` Sebastian Utz
2004-09-07 21:35 ` David Greaves
2003-12-08 17:55 Stefan Myankov
2003-02-07 23:03 Stefan Myankov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1093859380.13971.166.camel@slurp \
--to=su@rotamente.com \
--cc=linux-raid@nsr500.net \
--cc=linux-raid@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).