From mboxrd@z Thu Jan  1 00:00:00 1970
From: John Rowe <rowe@excc.ex.ac.uk>
Subject: Re: Slow reconstruction
Date: Wed, 29 Jun 2005 18:52:01 +0100
Message-ID: <1120067521.21458.261.camel@volt>
References: <1120061430.21458.236.camel@volt> <42C2CEF0.7030108@h3c.com>
	 <1120066268.21458.252.camel@volt>  <20050629174943.GA6431@inara.maison.net>
Mime-Version: 1.0
Content-Type: text/plain
Content-Transfer-Encoding: 7bit
Return-path: <linux-raid-owner@vger.kernel.org>
In-Reply-To: <20050629174943.GA6431@inara.maison.net>
Sender: linux-raid-owner@vger.kernel.org
To: KELEMEN Peter <Peter.Kelemen@cern.ch>
Cc: linux-raid@vger.kernel.org
List-Id: linux-raid.ids


> These are very low values.  A modern 250G drive should exceed
> 50MB/sec.  What kind of IDE controller do you use?

None of it is very modern - it's put together from what we had lying
around :-(

(Don't even start..) I'll see if it's any different when the array is
reconstructed.

John