From: Redeeman <redeeman@metanurb.dk>
To: Justin Piszcz <jpiszcz@lucidpixels.com>
Cc: linux-raid@vger.kernel.org
Subject: Re: time limited error recovery and md raid
Date: Mon, 08 Dec 2008 17:59:29 +0100 [thread overview]
Message-ID: <1228755569.16555.113.camel@localhost> (raw)
In-Reply-To: <alpine.DEB.1.10.0812051851010.4906@p34.internal.lan>
On Fri, 2008-12-05 at 18:52 -0500, Justin Piszcz wrote:
>
> On Sat, 6 Dec 2008, Redeeman wrote:
>
> > On Fri, 2008-12-05 at 16:01 -0500, Justin Piszcz wrote:
> >>
> >> On Fri, 5 Dec 2008, Redeeman wrote:
> >>
> >>> Hello..
> >>>
> >>> Im going to be building a software raid6 setup with probably 8 disks,
> >>> and i've been looking at the wd gp disks, which comes in both standard
> >>> and raid edition, with the raid edition being much more expensive.
> >>>
> >>> I have searched around, and found that it is indeed possible to activate
> >>> tler on the "normal" disks, however, the setting has a parameter, more
> >>> specifically, how many seconds it should be limited to. Default is 7.
> >>>
> >>> So i was wondering, what should that be set to, to be optimal for linux
> >>> md raid? i havent been able to find any information about this.
> >>>
> >>>
> >>> Thanks.
> >>>
> >>>
> >>> mvh.
> >>> Kasper Sandberg
> >>>
> >>> --
> >>> To unsubscribe from this list: send the line "unsubscribe linux-raid" in
> >>> the body of a message to majordomo@vger.kernel.org
> >>> More majordomo info at http://vger.kernel.org/majordomo-info.html
> >>>
> >>
> >> The exact time is a good question.
> >
> > About this, shouldnt it be possible to find the exact time which the
> > linux raid system waits until it auto kicks out the drive?
> >
> >
> >>
> >> Something I have noticed is when TLER is off, the drives hang up when they
> >> hit a bad sector and when TLER is on, the drives is kicked out of the
> >> array immediately when it reports a bad sector.
> >
> > On further thought, might this not suggest that the linux raid system
> > waits indefinetly for I/O error, before kicking out?
> It times out after 1-2 minutes. I have been dealing with this for a very long
> time, another 'symptom' is short smart tests taking forever when the disk is in
> a soon-to-be failing state.
Do you know if this is actually caused by the disk's error recovery
timing out in 1-2 minutes, or the linux raid system?
> >
> > If that is indeed the case, then if the use of the raid isnt
> > time-critical, then maybe its a good thing to have tler enabled, just in
> > case the disk is able to fix stuff?
> With TLER enabled the drive is kicked out immediately. The purpose of TLER is
> that of HW raid where it can alert the controller about it and the controller
> handles it.
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-raid" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
next prev parent reply other threads:[~2008-12-08 16:59 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2008-12-05 20:57 time limited error recovery and md raid Redeeman
2008-12-05 21:01 ` Justin Piszcz
2008-12-05 21:07 ` Redeeman
2008-12-05 21:12 ` Justin Piszcz
2008-12-05 21:18 ` Redeeman
2008-12-05 21:21 ` Justin Piszcz
2008-12-05 21:31 ` Redeeman
2008-12-05 21:42 ` Justin Piszcz
2008-12-05 22:09 ` Redeeman
2008-12-05 23:52 ` Justin Piszcz
2008-12-06 2:59 ` Redeeman
2008-12-06 9:23 ` Justin Piszcz
2008-12-06 14:33 ` Redeeman
2008-12-06 9:14 ` David Greaves
2008-12-06 9:59 ` Justin Piszcz
2008-12-06 10:32 ` Michal Soltys
2008-12-06 10:53 ` Justin Piszcz
2008-12-05 23:04 ` Redeeman
2008-12-05 23:52 ` Justin Piszcz
2008-12-06 0:42 ` Roger Heflin
2008-12-08 16:59 ` Redeeman [this message]
2008-12-08 17:01 ` Justin Piszcz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1228755569.16555.113.camel@localhost \
--to=redeeman@metanurb.dk \
--cc=jpiszcz@lucidpixels.com \
--cc=linux-raid@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).